Wagner 505

12
Airless & High Volume Low Pressure Paint Spraying Systems & Line Stripers Airless Spray Technology Titan Tool Inc. 556 Commerce Street Franklin Lakes, NJ 07417 1-800-526-5362 Fax 1-800-528-4826 International Sales Titan Tool Inc. 556 Commerce Street Franklin Lakes, NJ 07417 1-201-337-1240 Fax 1-201-405-7449 Titan Tool of Canada 200 Trowers Road, Unit 7B Woodbridge,Ontario L4L-5Z8 1-800-565-8665 (Canada only) Fax 1-905-856-8496 © 2002 Titan Tool Inc. Titan & Speeflo are registered trademark of Titan Tool Inc. 213-020 SOLD EXCLUSIVELY THROUGH PROFESSIONAL DISTRIBUTORS VISIT US ON THE WEB AT: www.titantool.com Call Tech Services at 1-800-526-5362 for complete warranty information. 440i / 640i Brochure No. 213-075 Air Powered Brochure No. 213-650 PowrTwin & Hydra Brochure No. 213-042 740i / 840i / 1140i Brochure No. 213-141 PowrLiner Brochure No. 213-002 SuperTex Brochure No. 213-405 Hydra Brochure No. 213-615 Hydraulic Airless Sprayers Hydra Series PowrTwin Series ®

Transcript of Wagner 505

Page 1: Wagner 505

Airless & High Volume Low Pressure Paint Spraying Systems & Line Stripers

Airless Spray Technology

Titan Tool Inc.556 Commerce StreetFranklin Lakes, NJ 074171-800-526-5362Fax 1-800-528-4826

International SalesTitan Tool Inc.556 Commerce StreetFranklin Lakes, NJ 074171-201-337-1240Fax 1-201-405-7449

Titan Tool of Canada200 Trowers Road, Unit 7BWoodbridge, Ontario L4L-5Z81-800-565-8665 (Canada only)Fax 1-905-856-8496

© 2002 Titan Tool Inc. Titan & Speeflo are registered trademark of Titan Tool Inc.213-020

SOLD EXCLUSIVELY THROUGH PROFESSIONAL DISTRIBUTORS VISIT US ON THE WEB AT: www.titantool.comCall Tech Services at 1-800-526-5362 for complete warranty information.

440i / 640iBrochure No. 213-075

Air PoweredBrochure No. 213-650

PowrTwin & HydraBrochure No. 213-042

740i / 840i / 1140iBrochure No. 213-141

PowrLinerBrochure No. 213-002

SuperTexBrochure No. 213-405

HydraBrochure No. 213-615

HydraulicAirless

SprayersHydra Series

PowrTwin™Series

®

Page 2: Wagner 505

Table of Contents

ACCESSORIES

Airless Guns pgs. 1-3LX-80, LX-80 Gold, SGX-20, ProFit, Gun, Tip & Hose Kits, 550-SC Telescoping Pole Gun, L-70 In-Line Gun,

L-50 In-Line Gun, 6’ Outrigger, H-Gun, Reel-EZ Hose Reels, Adjustable Self Cleaning Tip

Airless Tips & Bases pgs. 4-6SC-6 Guard, SC-6 Reversible Tip, Airless Spray Tip Recommendation Chart, Control Modules,

Tungsten Carbide Flat Tips, Fine Finish Metering Orifice, SC-6 Line Striping Tip, Safety Guards,

Manufacturers Compatibility Chart, Stencil Kit

Understanding Airless Tips pgs. 7-8Understanding Airless Tips, Understanding Tip Wear, Understanding Tip Product Numbers

Extensions & Poles pgs. 9-10Airless Gun Extensions, Wrench-Tight Retaining Nut, Swivel Head, Hand Tite Extension Pole,

Angle Adapter Assembly, Retaining Nut Specification Chart, Extension Pole Coupling

Roller Assemblies pgs. 11-12Inner Feed Pressure Roller, Spray Roller, Telescoping Pressure Roller, Spray/Roll Application Kit,

Roller Head Replacement Covers

Hose, Siphons, Fittings & Filters pgs. 13-17High Quality Airless Hose, Airless Fluid Hose Whips, ConvertoKits, High Pressure Fluid Gauge Kit,

Manifold To Hose Couplings, Manifold To Manifold Couplings, Hose To Hose Couplings, Swivel Union,

900 Street Elbows, Pipe Tees, Reducer Bushings, Pipe Plugs, High Pressure Swivels, Pump Manifold Filters,

Piston Lube, Aircare, Coolflo™, Repacking Kit Chart, LS-10 Liquid Shield Plus, In-Line Filter, Inlet Screens,

Gun & Pump Filters

Pro-Finish Gun / Accessories pgs. 17-18Pro-Finish HVLP Gun, Pro-Finish Needle/Nozzle Set, Pro-Finish Air Cap, Pro-Finish Atomizing Kit,

Pro-Finish Needle/Nozzle & Air Cap Recommendation Chart

Pro-Finish Quart Cup & Pot, Air & Fluid Hoses & Accessories pgs. 19-202.5 Gallon Disposable Liner, Quart Cup, Pro-Finish Air Hose, Siphon Filters, Regulator Complete,

Quart Cup Lid, One-Way Valve, Quart Cup Strainer, 2.5 Gallon Pressure Pot Complete,

2 Ft. Flexible Whip, Quart Cup Lid Gaskets, Pro-Finish Fluid Hose, Quick Disconnect,

TSP System, Fluid Hose Connector, Turbine Replacement Filters

Airless Spray Technology

• Operates over 100 feet away from

unit — through walls, trees and

other obstacles.

• Increase or decrease the pressure

— without climbing down off the

ladder or scaffold.

• Ability to turn sprayer ON and

OFF; eliminates sprayer “Run

Away” when you run out of paint by

stopping sprayer quickly— extending

your piston and packing life.

-remote™

Adjust PSI on the Fly, or Turn Sprayer On/Off...

from over 100ft Away!

Universal remote control operates most manufactureselectronic pressure controlled sprayers.

For Smaller Line Striping Jobs!

Kit Includes:• (1) Metal Pole• (3) Wheels • (1) SC-6 Striping Tip

Gun & Hose Not Included.Patent Pending

Professional Spray Accessory

• Radius

Features:

• Great for Smaller Line Striping Jobs.

• Ideal for Touching-Up Existing Lines.

• Stripes in Tight Spaces.

• Stripes In-Between Parked Cars.

• Works with Any Airless Sprayer.

• Simple Striping Instructions.

• Compact, Lightweight & Portable.

• Easy-to-use.

• (1) Parts Kit• (1) Striping Instructions

• Parking Lots

• In-Between Cars

• Warehouses

• Curbs

U n i v e r s a l R e m o t e C o n t r o l

IN THE INDUSTRY!

THE1ST1ST

FOR 2003!NEW

759-150

800-690 i-remote & receiver800-691 remote only800-692 receiver only

Accessories_iremote_side stripe 12/27/02 11:21 AM Page 3

Page 3: Wagner 505

Airless Guns Airless GunsAirless Guns 2

550-SC Telescoping Pole Gun L-70 In-Line Gun L-50 In-Line Gun 6’ Outrigger H-Gun

1 Airless Guns

LX-80 LX-80 Gold SGX-20 ProFit Gun, Tip & Hose Kits

Airless Spray Technology ACCESSORIES

• Available with 4 finger trigger or adjustable 2 finger trigger

• All metal construction

• Tungsten carbide ball valve, seat &stainless steel swivel insures long life& durability

• In-handle filter reduces clogging &increases tip life

• Ball bearing swivel reduces hose kinks& assures effortless control

• Includes 517 SC-6 reversible tip

• Lightweight, only 20 ounces (0.63 kg)

• Pressure rated at 3600 PSI (257 BAR)

Product No. 580-100 (4 Finger Trigger)Product No. 581-085 (2 Finger Trigger)Repair Kit No. 580-034Replacement Filters No. 500-200-XX

LX-80 LX-80 Gold

• Constructed of conductive & impactresistant polymer with stainless steelfibers (patent pending)

• Special polymer is solvent resistant & conductive to assure safety & protection against static discharge when properly grounded

• In-handle filter reduces tip clogs & increases tip life

• Includes 515 SC-6 reversible tip.

• Easy 2 finger trigger pull with reversibletrigger lock

• Pressure rated at 3600 PSI (257 BAR)

Product No. 703-530Repair Kit No. 703-542Replacement Filter No. 703-532

ProFit

Includes airless gun with 517 SC-6 reversible

tip & 50’ x 1/4” (15m x 6mm) high

quality airless hose with spring guards.

LX-80 Gold Gun, Tip & Hose KitProduct No. 584-050LX-80 Gun, Tip & Hose KitProduct No. (4 Finger Trigger) 580-050

(2 Finger Trigger) 581-150SGX-20 Gun, Tip & Hose Kit Product No. 520-050

• All metal construction

• Stainless steel fluid passages

• Tungsten carbide ball valve & seatinsures long life & durability

• Easy 2 finger trigger pull

• Includes 517 SC-6 reversible tip

• Pressure rated at 5000 PSI (350 BAR)

Product No. 520-100Repair Kit No. 520-025

Gun, Tip & Hose Kits

SGX-20

550-SC Telescoping Pole Gun• Reversible tungsten carbide seat offers

twice the life of standard diffusers

• Unique two-piece seal assembly

designs allows removal of just the

ball for easy maintenance

• Ultra-light trigger pull & form

fitting handle reduces hand fatigue

• Ball bearing swivel reduces hose kinks

• In-handle filter helps reduce tip

clogs & increase tip life

• Includes 517 SC-5 reversible tip

• Pressure rated at 3600 PSI (257 BAR)

Product No. 584-100Repair Kit No. 594-040

(Ball & Seat Gasket Only)Repair Kit No. 584-045 (Complete Kit)Replacement Filters No. 500-200-XX

• Convert existing gun to 6’ (2m) polegun & back in seconds

• Allows you to increase production & profits

• Constructed of lightweight & rigid aluminum to reduce arm fatigue

• Large, hand-tight gun installation holder & knob

• No additional hoses or fittings required

• Adapts to all Titan airless spray guns & most manufacturers airless spray guns

Product No. 757-920

• Titan’s L-50 In-Line gun features an all metal design & a filter in the handle for a superior finish &extended life.

• Pressure rated at 3300 PSI (233 BAR)

Product No. 703-820Repair Kit No. 703-542

• In-handle filter reduces clogging

• “In-line” design is a natural extensionto any pole or gun extension

• Pressure rated at 3500 PSI (250 BAR)

Product No. 310-070Repair Kit No. 310-098

L-70 In-Line Gun

L-50 In-Line Gun

6’ Outrigger

• Designed to help the professional painter reach those high, out-of-the-way places that normallyrequire the use of a ladder or scaffolding.

• Available in either 3'-6'(.9m-2m) or 3'-12'(.9m-4m) lengths, both come with control modules thathave an adjustable spray pattern.

• Pressure rated at 4000 PSI (275 BAR)

Product No. 550-SC-6 (3’-6’)550-SC-12 (3’-12’)

Replacement Tip No. 500-XXXM(See page 5 for information)

• Pressure rated at 4000 PSI (275 BAR)

Heavy Materials Product No. 801-308

Heavy Materials with Swivel Product No. 801-309

ZincProduct No. 801-385

PaintProduct No. 801-307Repair Kit No. 801-050

H-Gun

LX-80 Gun SoldSeparately

Page 4: Wagner 505

Airless Tips & BasesAirless Tips & Bases 4

SC-6 Guard SC-6 Reversible Tip Airless Spray Tip Recommendation ChartAirless Guns3 Airless Guns

Reel EZ Hose Reels Adjustable Self Cleaning Tip

Airless Spray Technology

Reel EZ 16 Cart-Mount Reel EZ 10 Skid-Mount Product No. 769-100 Product No. 769-200

A simple turn of theadjustment knob allowsyou to go from widepatterns for large areasto narrow patterns forcutting & trim work.

ACCESSORIES

Operator-selected fan sizes & complete control of the orifice opening give the Adjustable Tip

versitality. Because the orifice size can be fingertip controlled, clogged particles are cleared

instantly, without triggering. Adjustable Tips are engineered to perform multiple airless

applications efficiently & quickly, reducing overspray & downtime.

Pressure rated at 3500 PSI

• Fully adjustable fan widths from 2" to 24" reduce overspray

• Self-cleaning feature eliminates costly downtime due to clogs

• Tungsten carbide wear parts for long life

• Lightweight - less than one ounce

• Fits most popular guns without an adaptor

• Available in six different sizes to suit most materials & job conditions. (Refer to selection chart)

• Order 450 series guard for use with Adjustable Tips

Product No. 341-XXX

To order carbide replacement pins, replace the zero (0) in the tip part number with a three (3).

Example: 341-028 replacement pin part number is 341-328.

Material To Be Sprayed Product Number Orifice Range Fan WidthLacquer & Stain 341-015 .005-.018 2-14 in. (5-36 cm)

Lacquer & Stain 341-020 .007-.019 4-20 in. (10-51 cm)

Latex & Enamel 341-024 .007-.026 2-14 in. (5-36 cm)

Latex & Enamel 341-028 .011-.026 6-22 in. (15-60 cm)

High Builds 341-041 .017-.035 6-24 in. (15-60 cm)

Very Heavy 341-049 .021-.054 6-16 in. (15-41 cm)

Reel EZ Hose Reels

• The Reel EZ virtually eliminates hose hassles & increases

your production. The Reel EZ 16 mounts to the frame of all

Titan & Speeflo cart style paint sprayers with a heavy duty

universal mounting bracket. The Reel EZ 10 mounts to the

frame of all Titan skid style paint sprayers such as the 440i.

Both the Reel EZ 16 & Reel EZ 10 also mount to most major

manufacturer’s paint sprayers with similar designs.

• The Reel EZ 16 can hold up to 100' (30.5 m) of 1/4" airless

hose & the Reel EZ 10 can hold up to 50' (15.2 m) of 1/4"

airless hose. Both are rated at 3600 psi (257 BAR).

Adjustable Self Cleaning Tip

• Longest Lasting Tip In The Industry

• New ergonomic design assurescomfort when rotating to spray orreverse position for cleaning

• Exclusive flow indicator indicatesthat tip is in spray or clean position

• Highest quality tungsten carbide assures longest life & durability

• Fewer passes & better coverage than competitors because of full fan pattern with minimal feathering

• Insertion & knockout tool for no fuss assembly

• Solvent proof seal - One seal for all coatings

• Ergonomic handle design

• Interchangeable with most competitive bases

Product No. 661-XXX

SC-6 Reversible Tip

SC-6 Guard• Molded of a conductive

polymer to help prevent static discharge when properly grounded

• Hand-tight design allowsthis guard to be installedwithout tools

• Seal cavity on safety guardhas large “flats” for quick & easy installation of seal

• For use with Titan SC-6 tip only

• Interchangeable with mostcompetitive bases

Product No. 661-XXX(See chart on page 6 for partnumber information)

.007 .009 .011 .013 .015 .017 .019 .021 .023 .025 .027 .029 .031 .033 .035 .039 .043

107 109 111 113 115 117

207 209 211 213 215 217 219 221 223 225

307 309 311 313 315 317 319 321 323 325 331 335

407 409 411 413 415 417 419 421 423 425 427 431 435 443

509 511 513 515 517 519 521 523 525 527 529 531 533 535 539 543

609 611 613 615 617 619 621 623 625 627 629 631 633 635

715 717 719 721 723 725 731 735

815 817 819 821 823 831 835

919 921

Airless Spray Tip Recommendation ChartCoating Viscosity Filter Mesh Orifice Range

Varnishes Light 100-150 .009-.011Lacquer Finishes (clear) .009-.011Sanding Sealers .009-.011Shellac (clear) .009-.013Transparent Stain .011-.013Water Sealers (clear) .011-.013

Solid Stains Medium 60-100 .013-.015Exterior House Paints .013-.017Interior Wall Paints .013-.017Interior & Exterior Primers .017-.019

Commercial Grade Heavy 30-60 Architectural Coatings .017-.019Interior Wall Paints .017-.019Interior Wall Primers .017-.019Dry Fall (quick dry) .019-.023One Coat, Primer-Finish Paints .019-.023

Elastomerics Extra Heavy Remove .021-.031Pigmented Waterproofers .021-.027Block Filler .025-.031

Orifice sizes recommended on this chart are based on fan widths between 8 inches (20 cm) & 12 inches (30 cm).

2”- 4”

4”- 6”

6”- 8”

8”- 10”

10”- 12”

12”- 14”

14”- 16”

16”- 18”

18”- 20”

Fan

Wid

th (I

nch

es)

Orifice Size (Inches)

SC-6 Available Tip Sizes

Page 5: Wagner 505

Airless Tips & Bases 6

Airless Tips & Bases5 Airless Tips & Bases

Control Modules Tungsten Carbide Flat Tips Fine Finish Metering Orifice

Airless Spray Technology ACCESSORIES

Standard Airless Tips SC-6 Striping Tip

Airless Gun

CoatingPre-Atomized(metered) Coating

MeteringOrifice

Flat Tip

• Make your Flat Tip & Adjustable Tip a Fine Finish Tip

• Increases your transfer efficiency by allowing you to spray at lower pressures

• Designed to produce a more complete atomization of the spray pattern

• Fits the inlets of most tungsten carbide (flat) spray tips & adjustable tips

• Constructed of the highest quality tungsten carbide

• Also serves as a gasket to assure a high pressure seal between the spray tip & gun

• When ordering, always use a metering orifice that is at least .004 larger than the spray tip being used. Example: a .019 tip should be used with a .023 Metering Orifice

• For use with 450 Series guards Max. CorrespondingProduct Orifice Tip Size Number In Inches Recommended

512-011 .011 .007512-013 .013 .009512-015 .015 .011 512-018 .018 .013512-021 .021 .017 512-023 .023 .019 512-026 .026 .021512-031 .031 .026 512-035 .035 .031512-039 .039 .035512-043 .043 .039512-049 .049 .043512-059 .059 .052

Material To Product Orifice FanBe Sprayed Number Range Width

Lacquer & Stain 500-015M .005-.018 (50-356mm) 2-14 in. (5-36cm)Lacquer & Stain 500-020M .007-.019 (102-508mm) 4-20 in. (10-51cm)Latex & Enamel 500-024M .007-.026 (50-356mm) 2-14 in. (5-36cm)Latex & Enamel 500-028M .011-.026 (152-607mm) 6-24 in. (15-61cm)High Builds 500-041M .017-.035 (152-607mm) 6-24 in. (15-61cm)Very Heavy 500-049M .021-.054 (152-406mm) 6-16 in. (15-41cm)

• For use with the 550-SC Telescoping Pole Gun.

Control Modules

Fine Finish Metering Orifice

• Precision machined from the highest quality Tungsten Carbide

• Available in sizes from .007- .072

• Gasket not included

• See page 8 for available sizes

Order 450 series guards for use with flat tips.Product No. 002-XXX

Tungsten Carbide Flat Tips

Airless Tips & Bases

SC-6 Line Striping Tip

SC-6 Flat Popular Applications Product No. Product No.

Parking lot lines 4"- 6" 665-1708 018-1704 (10-15 cm) or 1908 or 1904

Long lines 4" - 6" 665-2308 018-2304(10-15 cm)

Athletic lines 2" (5 cm) 665-1504 018-1502

Other sizes & fan widths are available.See your dealer or call 1-800-526-5362 for details.

Comes with 1/8" highpressure gasket for usewith both adjustable &flat tips.

Product No. 450-XXX

Safety Guards

Stencils are molded of 1/16"

(.15 cm) durolast polyethylene.

This material is very durable

& lays flat on surface being

stenciled for clean &

accurate marking.

Kit contains one each of the following:

211/2”(55 cm) Handicap 12” (30 cm) Number Kit (0-9)42” (105 cm) Straight Arrow 4”(10 cm) No Parking42” (105 cm) Curved Arrow 4”(10 cm) Fire Lane12” (30 cm) No Parking 4”(10 cm) Visitors12” (30 cm) Fire Lane 4”(10 cm) Reserved

Product No. 756-135

Stencil Kit

SC-6 Guard Guard for Adjustable ManufacturersProduct No. & Flat Tip Only Compatibility

661-012 450-100A Titan, Graco, Spray TECH,

ASM, Airlessco

661-015 450-300 ASM, Amspray, Spray TECH

450-400A ASM, Campbell-Hausfeld,De Vilbiss JGB, Nordson,Speedaire, Wards

450-700A Airlessco, Stewart Warner

661-016 450-800 Binks

Manufactures Compatibility Chart

SC-6 Line Striping Tip Safety Guards Manufacturers Compatibility Chart Stencil Kit

Striping Tip Comparison

Designed specifically for line

striping applications such

as parking lot lines, road

lines, athletic field markings,

etc. These striping tips create

sharp edges for cleaner, more

distinct lines that last longer.

Designed to last longer than standard airless tips, Titan’s

striping tips are precision machined from high quality

Tungsten Carbide & are compatible with all

striping coatings.

Page 6: Wagner 505

Airless TipsAirless Tips 8

Understanding Tip Product NumbersAirless Tips7 Airless Tips

Understanding Airless Tips Tip Wear

Airless Spray Technology

Airless spray tips are a key component to the

successful operation of an airless spray system.

They define the spray pattern, control the flow

of the coating being sprayed & ultimately tell

the pump how hard it must work. A proper

understanding of airless tips is critical to the

success of any airless application.

Airless Spray Tip Characteristics

It is important to remember that the orifice

size, in conjunction with the fan-width size,

determines the spray characteristics of the tip.

Examples: The larger the orifice with the same fan width, the greaterthe volume of paint applied to the same area.

Conversely, the larger the fan width with the same orifice means the sameamount of material is being applied over a greater area. The result is less volumeof paint per square inch.

Spray Pattern Width

10"-12" 8" 6" 4"(25-30 cm) (20 cm) (15 cm) (10 cm)

Tip Size

New Worn to Worn to Worn to517 419 321 223

Flow Rate

.30 gpm .40 gpm .47 gpm .57 gpm(1.1 lpm) (1.5 lpm) (1.7 lpm) (2.1 lpm)

Flow Rate Increase

33% 57% 90%

When beginning a project, choosing the right tip

size & fan width will determine how profitable you

will be through both coating consumption &

production time. If the tip size being used is

wrong - by either choice or through wear - mil

thicknesses will be too heavy & the finish will

be unprofessional.

The spray pattern chart demonstrates what

happens as a tip wears. As wear occurs, the pattern

size decreases & the orifice size increases. You will

find that you have to make more passes to cover

the same area. There is no standard rate of tip

wear due to the variation of the abrasiveness of all

coatings. Replace your tips after 100 gallons (378

liters), it's one of the most profitable things you

can do.

661-519 First 3 digits specify either SC-6 or Flat Last two digits specifystyle: 661 = SC-6 Style the orifice size

002 = Flat Style

EXAMPLE: Product Number 661-519 is:• SC-6 Reversible Tip • 10"-12" Fan Pattern • .019 orifice

When ordering airless spray tips from this chart, precede the tip number with "661" for SC-6 & "002" for Flat.

Orifice Fan GPM Flat & SC-6Size In Width In Flow TipInches Inches Rate Number*

.007 2"-4" .05 107(.018 cm) 4"-6" (.2 lpm) 207

6"-8" 3078"-10" 407

.009 2"-4" .08 109(.023 cm) 4"-6" (.3 lpm) 209

6"-8" 309 8"-10" 40910"-12" 50912"-14" 609

.011 2"-4" .12 111(.028 cm) 4"-6" (.5 lpm) 211

6"-8" 3118"-10" 41110"-12" 51112"-14" 61114"-16" 71116"-18" 81118”-20” 911

.013 2"-4" .18 113(.032 cm) 4"-6" (.7 lpm) 213

6"-8" 313 8"-10" 413 10"-12" 513 12"-14" 613 14"-16" 713 16"-18" 81318"-20" 913

.015 2"-4" .23 115 (.038 cm) 4"-6" (.9 lpm) 215

6"-8" 315 8"-10" 415 10"-12" 515 12"-14" 615 14"-16" 715 16"-18" 815 18"-20" 915

.017 2"-4" .30 117 (.043 cm) 4"-6" (1.1lpm) 217

6"-8" 317 8"-10" 417 10"-12" 517 12"-14" 617 14"-16" 717 16"-18" 817 18"-20 " 917

Orifice Fan GPM Flat & SC-6 Size In Width In Flow TipInches Inches Rate Number*.019 4"-6" .40 219(.048 cm) 6"-8" (1.5 lpm) 319

8"-10" 419 10"-12" 519 12"-14" 619 14"-16" 719 16"-18" 819 18"-20" 919

.02 4"-6" .47 221 (.053 cm) 6"-8" (1.7 lpm) 321

8"-10" 421 10"-12" 52112"-14" 621 14"-16" 721 16"-18" 821 18"-20" 921 20"-22" 1021

.023 4”-6” .57 223(.058 cm) 6"-8" (2.1 lpm) 323

8"-10" 423 10"-12" 523 12"-14" 623 14"-16" 723 16"-18" 823 18"-20" 92320"-22" 1023

.025 4"-6" .66 225 (.064 cm) 6"-8" (2.5 lpm) 325

8"-10" 42510"-12" 52512"-14" 62514"-16" 72516"-18" 82518"-20" 925

.027 6"-8" .77 327(.069 cm) 8"-10" (2.9 lpm) 427

10"-12" 52712"-14" 62714"-16" 72716"-18" 827 18"-20" 927

.029 10"-12" .88 529(.074 cm) 12"-14" (3.3 lpm) 629

Orifice Fan GPM Flat & SC-6Size In Width In Flow TipInches Inches Rate Number*.031 6"-8" 1.1 331 (.078 cm) 8"-10" (4.1 lpm) 431

10"-12" 53112"-14" 631 14"-16" 731 16"-18" 83118"-20" 931

.033 10"-12" 1.2 533(.084 cm) 12"-14" (4.5 lpm) 633 .035 6"-8" 1.3 335 (.089 cm) 8"-10" (4.9 lpm) 435

10"-12" 535 12"-14" 635 14"-16" 735 16"-18" 835

.039 8"-10" 1.65 439(.099 cm) 10"-12" (6.2 lpm) 539

12"-14" 639 16"-18" 839

.043 8"-10" 2.05 443(.109 cm) 10"-12" (7.8 lpm) 543

22"-24" 1143

The following sizes are available in Flat Tip Only.052 10"-12" 3.0 552 (.132 cm) 22"-24" (11.3 lpm) 1152.062 10"-12" 4.25 562(.157 cm) (16 lpm).072 10"-12" 5.75 572(.182 cm) (22 lpm)

Spray width measured with gun tip 12 inches (30 cm) from work surface. Other sizes available,call 800-526-5362 for more information.

*Sizes Available as a flat tip only are bold &italicized.

Double the first digit after the hyphento determine the fan width when tip is12" from the surface being sprayed

ACCESSORIES

Fan Width: 10” 10” 10”

Orifice Size: .017 .021 .026

Tip No.: 517 521 526

Fan Width: 8” 12” 16”

Orifice Size: .017 .017 .017

Tip No.: 417 617 817

Understanding Airless Tips

Tip Wear

Understanding Tip Product Numbers

Least Volume More Volume Most Volume

Page 7: Wagner 505

Extensions & GunsExtensions & Poles 10

Hand Tite Extension Pole Angle Adapter Assembly

Retaining Nut Specification Chart Extension Pole Coupling

These lightweight aluminum extensions are constructed with inner core ribs which

reinforce the pole & greatly increase their rigidity. The inner core rib

construction allows different length poles to be easily coupled together, while

maintaining the proper rigidity to suit most job conditions.

• Reach high out-of-the-way places when spray or pressure rolling

• Adapts to most airless guns

• Pressure rated at 3600 PSI (257 BAR)

(Refer to the retaining nut chart on this page to select the proper nut size toadapt to your Airless Gun. Always use #1 nut when using Titan Angle Adapter.)

1.5' (.46 m) Pole-Product No. 310-381-X 3' (.9 m) Pole-Product No. 310-383-X 6' (1.8 m) Pole-Product No. 310-386-X

(Replace “X” with corresponding number from retaining nut chart)

Extensions & Guns9 Extensions & Poles

Airless Gun Extensions Wrench-Tight Retaining Nut Swivel Head

Airless Spray Technology ACCESSORIES

Tip Not Included

Tip Not Included

Permits a 260˚ rotation for greater spraying

versatility & accessibility. For use with Titan

Hand Tite Gun Extensions & Extensions Pole.

Product No. 711-600 Pole Extension Swivel Head(male, shown in photo left)

Product No. 611-630 Gun Extension Swivel Head(female, shown in photo right)

Swivel Head

Hand-Tite Retaining Nut

Part No. Manufacturer

611-407 Titan, Graco, Spray TECH, ASM

611-430 ASM, Spray TECH, Taiver, Wagner

For use with Titan extruded poles, gun extensions, & angle adapters

Tool required when changing retaining nut on Extruded PolesProduct No. 730-286

Airless Gun Extensions

• Lightweight & easy to handle, Titan Gun Extensions provide extrareach & keep operator & equipment cleaner.

• Available in lengths from 6" to 24" (15-60 cm).

• Can be used with most brands of airless spray guns. Refer to theRetaining Nut Specification chart to select the proper nut size to fityour gun.

• Guard available in 661 Series only for use with SC-6 Reversible tips.

6" (15 cm) Product No. 611-275-X12" (30 cm) Product No. 611-276-X18" (45 cm) Product No. 611-277-X24" (60 cm) Product No. 611-278-X

(Replace “X” with corresponding number from retaining nut chart)

Hand Tite Extension Pole

Adapt any extension pole to any standard airless gun. Because of it’s right-angle design, the angle

adapter allows the pole to extend from the gun at the same angle as the handle. The result is greater

efficiency & comfort. Pressure rated at 3600 PSI (257 BAR).

Refer to the retaining nut chart on this page to select the proper nut size to adapt to your Airless Gun.

Product No. 310-072-X

(Replace “X” with corresponding number from retaining nut chart)

Allows you to connect different length

extruded poles together to create

different lengths for any application.

(Do not exceed 12’)

Product No. 310-062

Extension Pole Coupling

Retaining Nut Specification Chart

Size No. Manufacturer

1 Titan, Graco, Wagner, Spray TECH, ASM

3 ASM, Spray TECH, Taiver, Speeflo

Angle Adapter Assembly

Page 8: Wagner 505

Roller AssembliesRoller Assemblies 12

Telescoping Pressure Roller Spray/Roll Application Kit Roller Head Replacement CoversRoller Assemblies11 Roller Assemblies

Inner Feed Pressure Roller Spray Roller

Airless Spray Technology ACCESSORIES

• The Inner Feed Pressure Roller is specifically designed for the professionalconcerned with high production paint applications.

• For high production paint applications where spraying is impractical.

• Lightweight, strong & designed for comfort, the Inner Feed Pressure Rollerincorporates a rigid pole & a unique paint distributor mechanism.

• The paint distributor mechanism is actually an auger which rotates throughthe length of the head assembly to evenly distribute paint to all points of the roller cover. It is this device that allows the operator to spend more time applying paint without concern for heavy build-ups or unevenpaint distribution.

• Best when used with Titan 310 Series Extruded Poles & L-70 or L-50In-Line Gun.

• Comes packaged with 1/2" (1.3 cm) nap roller cover. See the Pressure Rollerreplacement covers listing on the next page for a complete listing of nap thicknesses available for this product.

9" (22.7 cm) Roller Head 12" (30.5 cm) Roller Head

Product No. 310-934 Product No. 310-946

Inner Feed Pressure Roller

The Spray Roller is a one man, one motion unit, combining the advantages of

airless spraying & the ease of a roller. The material is sprayed directly on to the

surface without going through or on the roller. Therefore, the materials can be

applied quickly, evenly & completely.

• Uses standard 9” roller covers.• Capable of applying block fillers & other heavy materials.• Applications which require spraying & back-rolling can now be

accomplished by one person, in one motion.• The roller finish allows quick & easy touch-up.• Back-rolling the surface means you can reduce fluid pressure, further

reducing overspray.• Pole extensions can be coupled together to vary length.• The spray roller comes equipped with SC-6 airless reversible tip & easily

converts to an airless pole extension for spraying purposes.

9” Spray Roller Head AssemblyProduct No. 310-049

Spray Roller

Telescoping Pressure Roller

Spray/Roll Application Kit

Spray Roller Replacement CoversSize Nap Thickness Product No.

9" (23 cm) 1/2" (1.2 cm) 311-050-99" (23 cm) 3/4" (1.9 cm) 311-075-99" (23 cm) 1 1/4" (3.1 cm) 311-125-9

Roller Head Replacement Covers

Pressure Roller Replacement CoversSize Nap Thickness Product No.

9" (23 cm) 3/8" (.81 cm) 312-037-912" (30 cm) 3/8" (.81 cm) 312-037-129" (23 cm) 1/2" (1.2 cm) 312-050-912" (30 cm) 1/2" (1.2 cm) 312-050-129" (23 cm) 3/4" (1.9 cm) 312-075-912" (30 cm) 3/4" (1.9 cm) 312-075-129" (23 cm) 1 1/4" (3.1 cm) 312-125-912" (30 cm) 1 1/4" (3.1 cm) 312-125-12

• For high production paint applications where spraying is impractical.

• Patented auger head design evenly distributes coating for a professional finish every time.

• Comes with light weight aluminum adjustable pole with a working pressure of 1200 PSI (84 BAR).

• The exclusive telescoping roller design has a large collar that allows you to quickly adjust thelength of the pole from 3’-6’(.9 m - 1.8 m).

• Also includes Titan’s L-50 In-Line gun which features an all metal design & a filter in the handlefor a superior finish & extended life.

Kit with 9” (22.8 cm) roller head 1/2" (1.3 cm) napProduct No. 310-950Kit with 12” (30.5 cm) roller head1/2" (1.3 cm) napProduct No. 310-955(Full range of replacement nap thickness covers available for both sizes below)

The Spray/Roll Application Kit offers the proper airless spray painting tools for

just about every possible painting condition. It’s the first complete application

kit created for professionals. By selecting the proper combination of tools, the

professional painter can choose to either spray, spray & roll or simply roll.

Includes:

• L-70 In-Line Gun • 9" (23 cm) Spray Roller Head Assembly

• 3' (9 m) Extruded Pole • 9" (23 cm) Pressure Roller Head Assembly

• Swivel Head Assembly • L-70 Gun Swivel Adapter

Product No. 310-110

Page 9: Wagner 505

Hose, Siphons, Fittings, Filters13 Hose, Siphons, Fittings, Filters

High Quality Airless Hose Airless Fluid Hose Whips

Airless Spray Technology

Hose, Siphons, Fittings, FiltersHose, Siphons, Fittings, Filters 14

ConvertoKits High Pressure Fluid Gauge Kit Manifold To Hose Couplings

Hose To Hose Couplings Manifold To Manifold Couplings

* Textile Braid - Spring guards at both ends FBE - Female Both Ends

NPT - National Pipe Tapered Thread MBE - Male Both Ends

NPSM - National Pipe Straight Mechanical Thread F/M- 1 Female / 1 Male Connection

ACCESSORIES

• Urethane cover is bonded to an inner nylon braid making it highly flexible & kink resistant

• Conductive tube design for proper grounding

• Durable abrasion-resistant urethane cover resists wear

High Quality Airless Hose

Airless Fluid Hose Whips

Part No. I.D. Feet Meters PSI BAR End Connection

316-513 1/4” 25 7.6 3300 228 1/4” NPSM (FBE) Swivel316-505 1/4” 50 15.2 3300 228 1/4” NPSM (FBE) Swivel250-114* 1/4” 50 15.2 4500 310 1/4” NPSM (FBE) Swivel250-614* 1/4” 25 15.2 7400 511 1/4” NPSM (FBE) Swivel690-375-50 3/8” 25 15.2 3300 228 1/4” NPSM (FBE) Swivel250-538* 3/8” 50 15.2 5400 372 3/8” NPSM (FBE) Swivel225-112* 1/2” 25 7.6 3000 207 1/2” NPSM (FBE) Swivel250-112* 1/2” 50 15.2 3000 207 1/2” NPSM (FBE) Swivel250-512* 1/2” 50 15.2 5100 352 1/2” NPSM (FBE) Swivel250-612* 1/2” 50 15.2 7975 670 1/2” NPSM (FBE) Swivel150-034* 3/4” 50 15.2 2400 165 3/4” NPT (FBE) Rigid250-534* 3/4” 50 15.2 5050 348 3/4” NPT (FBE) Rigid250-638* 3/4” 50 15.2 7400 511 3/8” NPSM (FBE) Swivel250-100* 1” 50 15.2 2100 145 1” NPT (FBE) Rigid

Part No. I.D. Feet Meters PSI BAR End Connection

550-240 3/16” 3 0.9 3300 228 1/4” NPSM (F/M) Swivel316-506 3/16” 5 1.5 3300 228 1/4” NPSM (F/M) Swivel550-222 3/16” 9 2.7 3300 228 1/4” NPSM (F/M) Swivel550-221 3/16” 15 4.5 3300 228 1/4” NPSM (F/M) Swivel203-514* 1/4” 3 0.9 4500 310 1/4” NPSM (FBE) Swivel550-227 1/4” 6 1.8 3300 228 1/4” NPSM (F/M) Swivel203-516* 1/4” 6 1.8 4500 310 1/4” NPSM (FBE) Swivel

LengthMaximum

Working Pressure

LengthMaximum

Working Pressure

• Gas engines feature low oil warning system to help prevent engine failure

• Extended life ExL-DC electric motors are totally enclosed fan cooled(TEFC) with thermal protection

• Rated at 10,000 hour life

ConvertoKits

Motor Type Used on Mfr. No.

4 hp Honda gas PowrTwin 4900 506-1122 hp DC electric PowrTwin 4900 506-2175.5hp Honda gas PowrTwin 6900 506-2752 hp ExL-DC electric PowrTwin 6900 506-2116.5 hp Honda gas PowrTwin 8900 506-2782 hp ExL-DC electric PowrTwin 8900 506-2769 hp Honda gas PowrTwin 12,000 506-2772 hp ExL-DC electric PowrTwin 12,000 506-2072 hp ExL-DC electric All GHD units 506-279

Manifold To Hose Couplings

DESCRIPTION PART NO.

1/4” NPS(M) X 1/4” NPS(M) 490-0121/4” NPS(M) X 3/8” NPS(M) 490-0163/8” NPS(M) X 3/8” NPS(M) 490-0141/2” NPS(M) X 1/2” NPS(M) 816-003

Hose To Hose Couplings

DESCRIPTION PART NO.

1/8” NPT(M) X 1/4” NPS(M) 490-0011/8” NPT(M) X 3/8” NPS(M) 654-0161/4” NPT(M) X 1/4” NPS(M) 227-0061/4” NPT(M) X 3/8” NPS(M) 804-5551/4” NPT(M) X 1/2” NPS(M) 814-0033/8” NPT(M) X 1/4” NPS(M) 812-0033/8” NPT(M) X 3/8” NPS(M) 808-5553/8” NPT(M) X 1/2” NPS(M) 815-0051/2” NPT(M) X 1/2” NPS(M) 228-0021/2” NPT(M) X 3/4” NPS(M) 804-2013/4” NPT(M) X 1/2” NPS(M) 814-555

Manifold To Manifold Couplings

DESCRIPTION PART NO.

1/8” NPT(M) X 1/4” NPT(M) 931-0291/4” NPT(M) X 1/4” NPT(M) 490-0021/4” NPT(M) X 3/8” NPT(M) 490-0063/8” NPT(M) X 3/8” NPT(M) 814-0043/8” NPT(M) X 1/2” NPT(M) 814-0051/2” NPT(M) X 1/2” NPT(M) 814-0061/2” NPT(M) X 3/4” NPT(M) 101-2013/4” NPT(M) X 3/4” NPT(M) 814-007

High Pressure Fluid Gauge Kit

Includes: 5000 PSI (350 BAR) high pressure fluid gauge attached to a T-Fittingwith one 1/4" (M)(.63cm) fitting & one 1/4" (F)(.63cm) fitting.

Product No. 730-397Fluid Gauge Only 730-394

Page 10: Wagner 505

Hose, Siphons, Fittings, FiltersHose, Siphons, Fittings, Filters 16

Pump Manifold Filters Piston Lube Aircare

Coolflo™ Repacking Kit Chart LS-10 Liquid Shield PlusHose, Siphons, Fittings, Filters15 Hose, Siphons, Fittings, Filters

Swivel Union 90 Street Elbows Pipe Tees

Reducer Bushings Pipe Plugs High Pressure Swivels

Airless Spray Technology

• Pressure rated at 5000 PSI (350 BAR)

• Reduce the chance of hose kinks, extend hose life

• Reduce effort when coiling & uncoiling hose

• Less arm fatigue when attached to gun

• Patented ball bearing design

Hose-To-Hose

1/4”(.63 cm) NPS(M) x 1/4”(.63 cm) NPS(M)Product No. 500-424

L-70 Gun-To-Extension Pole

Product No. 310-108

Gun-To-Hose/Hose-To-Pump

1/4”(.63 cm) NPS (F) x 1/4”(.63 cm) NPS (M)Product No. 500-428

• Specially formulated to prevent corrosion in air motors

• Suitable for use with most air driven sprayers

Size Product No.

1 Qt. bottle 311-1011 Qt. bottle (case of 12) 311-103

ACCESSORIES

DESCRIPTION PART NO.

1/4” NPS(F) X 1/4” NPT(M) 490-0053/8” NPS(F) X 1/4” NPT(M) 490-0421/4” NPS(F) X 3/8” NPT(M) 490-0323/8” NPS(F) X 3/8” NPT(M) 490-0431/2” NPS(F) X 1/2” NPT(M) 200-5553/4” NPS(F) X 3/4” NPT(M) 138-0373/4” NPS(F) X 1/2” NPT(M) 200-5571” NPS(F) X 1” NPT(M) 200-556

Swivel Union 900 Street Elbows

Reducer BushingsPipe Tees

DESCRIPTION PART NO.

3/8” NPT(F) X 3/8” NPT(M) 818-0021/2” NPT(F) X 1/2” NPT(M) 818-0033/4” NPT(F) X 1/2” NPT(M) 818-0113/4” NPT(F) X 3/4” NPT(M) 818-0101 1/4” NPT(F) X 1 1/4” NPT(F) 818-008

DESCRIPTION PART NO.

1/4” NPT (F) 970-0233/8” NPT (F) 817-0021/2” NPT (F) 817-0033/4” NPT (F) 817-004

DESCRIPTION PART NO.

3/8” NPT(M) X 1/8” NPT(F) 929-0603/8” NPT(M) X 1/4” NPT(F) 817-0011/2” NPT(M) X 1/4” NPT(F) 929-0611/2” NPT(M) X 3/8” NPT(F) 541-0093/4” NPT(M) X 1/4” NPT(F) 929-0621” NPT(M) X 3/4” NPT(F) 929-0761 1/4” NPT(M) X 3/4” NPT(F) 929-0781 1/4” NPT(M) X 1” NPT(F) 929-077

Pipe Plugs

High Pressure Swivels

DESCRIPTION PART NO.

1/8” NPT (M) 227-0301/4” NPT (M) 227-0273/8” NPT (M) 227-0331/2” NPT (M) 210-0233/4” NPT (M) 210-038

For use on Titan 690GXC, 740i, 840i & 1140iMesh Product No.

Coarse-30 mesh 730-067-30Medium-60 mesh 730-067Fine-100 mesh 730-067-10

Pump Manifold Filters

• Specially formulated to prevent materialsfrom adhering to the piston rod

• Suitable for use with most airless piston pump

Size Product No.

8oz. bottle 314-4804oz. bottle 314-481

Piston Lube

For use on Speeflo PowrTwin 5500, 6900,8900, 10000 & 12000Mesh Product No.

Coarse-30 mesh 930-005Medium-50 mesh 930-006Fine-100 mesh 930-007

For use on Speeflo PowrTwin 4500, 4900 & HydraMesh Product No.

Coarse-5 mesh 920-001Medium-50 mesh 920-004Fine-100 mesh 920-005

Air Care

• Cleans & protects your spray system against rust& corrosion

• Extends the life of your pump

• Now with anti-freeze protection

Size Product No.

1 Qt. bottle 314-4824 oz. bottle 314-483

LS-10 Liquid Shield Plus

• Hydraulic Fluid for PowrTwin sprayers

Size Product No.

1 Qt. bottle 430-3621 Gallon 430-3611 Qt. bottle (case of 12) 430-363

Coolflo™

Sprayer Repacking Kit

330 704-113

440i/640i 730-401

740i 800-450

690GXC 730-401

840i/1140i 800-273

1200GXC 761-175

PowrTwin 4900 107-051

PowrTwin 6900 143-050

PowrTwin 8900 144-050

PowrTwin 12000 144-050

PowrLiner 4000 107-051

PowrLiner 5000 143-050

PowrLiner 6000 143-050

Repacking Kit Chart

For use on Titan E15, E20, G40 & G55Mesh Product No.

Coarse-30 mesh 761-042Medium-60 mesh 761-043Fine-100 mesh 761-041

Page 11: Wagner 505

Pro-Finish Gun AccessoriesPro-Finish Gun Accessories 18

Pro-Finish Needle/Nozzle Set Pro-Finish Air Cap Pro-Finish Atomizing Kit

Pro-Finish Needle/Nozzle & Air Cap Recommendation ChartHose, Siphons, Fittings, Filters17 Hose, Siphons, Fittings, Filters

In-Line Filter Inlet Screens Gun & Pump Filters Pro-Finish HVLP Gun

Airless Spray Technology

• For use with the Titan Pro-Finish Series &Impulse Series Portable Turbine Systems

• Extra large air passages provide state-of-the-artperformance & atomization

• Large fluid passages offer unrestricted flow ofthe coating being sprayed, including latexes &multi-colored coatings

• Stainless steel fluid passages allow you to spraya wide range of coatings

• Fan pattern adjustable from 1/4" to 16"

• Large, user friendly control knobs

• Comes complete with #0 air cap, .051needle/nozzle set, needle tip removal tool & tip cleaning brush

Product No. 773-390 Gun with Quart CupProduct No. 773-300 Gun Only

Reverse thread design prevents filter from

unscrewing when handle is removed for

cleaning & replacement. For use in Titan

LX-80 & L-70 airless guns, In-Line Filter &

Epic 330 & 440i/640i. Packaged two per pack.

Mesh & Color Product No.Coarse 30 mesh (Green) 500-200-03Medium 60 mesh (White) 500-200-06Fine 100 mesh (Yellow) 500-200-10Extra Fine 150 mesh (Red) 500-200-15

Indexing air cap allows you to quickly change

fan patterns from horizontal to vertical

to circular

Turbulence chamber inside air cap

breaks down coating particle size for

better atomization

Exclusive design assures perfect centering

of air cap on nozzle

Large, user-friendly

control knobs

Exclusive location of air supply

to paint cup provides superior

atomization of a wide range of

today's finishing coatings

Comfortable, well-balanced

design reduces hand fatigue

& increases production

Exclusive flex tube feature keeps the

siphon tube in the coating at all times.

Now you can spray laterally without

starving fluid to the nozzle.

The flexible siphon hose is compatible

with all solvents & has a built-in filter

for a quality finish

Material Viscosity Needle/Nozzle Air Cap**

Acrylic lacquers, Stains, Dyes Thin .029(.7mm) #3

Waterborne Clears, Epoxy, Polyurethanes, Medium .043(1.1mm) #2Automotive base coat,Acrylic urethanes, Enamels

Finish grade latexes, Full bodied stains, Medium Thick Standard with gun #0 Standard with GunAlkyd enamels, Waterborne enamels .051(1.3 mm) #0, #1

Finish grade latexes, Alkyd wall paints Thick .073 (1.9 mm) #1, #0

High body, multi-colored Thick-Heavy .118 (3 mm) #4

Silver air caps are for use with gray handle Pro-Finish Gun.

* Note: Most coatings listed must be reduced to a spray consistency to ensure proper atomization. Consult coating manufacturer’s instructions for proper reduction recommendations.

** The sizes listed are recommendations only. A test should be performed to determine which works best with the coating being sprayed.

ACCESSORIES

Designed for added filtration or

when using a gun without a filter,

this In-line filter attaches easily

between standard airless hoses.

Product No. 550-223

In-Line Filter

Never operate your siphon or

direct immersion airless pump

without this in place. Also

known as a "rock catcher", this

product serves as a filtering

screen & prevents any debris

from entering the fluid section

that can cause damage &

expensive repairs.

Gun & Pump Filters Titan Inlet Screens (Small) Product No.

30 mesh (Fine) 700-90010 mesh (Coarse) 700-805

Titan Inlet Screens (Large) Product No.

30 mesh (Fine) 710-19110 mesh (Coarse) 710-046

Speeflo Inlet Screens Product No.

4900, 6900, 8900 &12000GH 103-627All GHD Units 710-046HydraPro IV 103-627

Pro-Finish HVLP Gun

For use with 773 Series Gun with Gray Handle

Product No. Size

773-151 .029773-152 .043773-153 .051773-154 .073773-155 .118

Pro-Finish Needle/Nozzle Set

For use with 773 SeriesGun with Gray Handle

Product No. Size

773-156 0773-157 1773-158 2773-159 3773-160 4

Pro-Finish Air Cap

This set comes complete with the full range of needles, nozzles & air caps. It also includes an extra

one-way valve & cup lid gaskets. This kit is compatible with all gray handle Pro-Finish spray guns.

Includes: 4 Air Caps - #1, #2, #3 & #4

4 Needle/Nozzle Sets -.029,.043, .073 & .118

2 Quart Cup lid gaskets

1 One-way valve

Product No. 773-164

Pro-Finish Atomizing Kit

Inlet Screens

Pro-Finish Needle/Nozzle & Air Cap Recommendation Chart*

Page 12: Wagner 505

Pro-Finish Fluid HosesPro-Finish Fluid Hoses 20

Pro-Finish Fluid Hose Quick Disconnect TSP System

Fluid Hose Connector Turbine Replacement Filters

• 3/8" fluid hose with female fittings on both ends

Product No. Length770-465 10 ft.(3m)770-466 20 ft.(6m)

Attaches to any length air hose or whip.

For use with the Titan HVLP Pro-Finish Gun

Product No. 770-240

• 3/8" (9m) NPS (M) x 3/8” NPS (M)

Product No. 490-014

Pro-Finish Accessories19 Pro-Finish Quart Cup & Pot, Air Hoses & Accessories

2.5 Gallon Disposable Liner Quart Cup Pro-Finish Air Hose Siphon FiltersRegulator Complete Quart Cup Lid One-Way Valve Quart Cup Strainer 2.5 Gallon Pressure Pot Complete 2 Ft. Flexible Whip Quart Cup Lid Gaskets

Airless Spray Technology

Pro-Finish 200 Pro-Finish 400 Product No. 770-459 Product No. 772-730

Pro-Finish 300/350 Pro-Finish TS40/TS50Product No. 770-460 Product No. 773-655

ACCESSORIES

Product No. 770-535

2.5 Gallon Disposable Liner

• Solvent resistant

Product No. 770-584 (1 each)

Quart Cup Lid Gaskets

• Quart Cup (complete with lid)Product No. 773-140

• Quart Cup (without lid)Product No. 773-560

• Quart Cup LidProduct No. 773-131

Quart Cup

• Quart Cup FilterProduct No. 770-536 (1 each)

• Pressure Pot FilterProduct No. 770-537 (1 each)

Siphon Filters

Product No. 770-715(Also replaces product No. 770-557)

Quart Cup Lid One-Way Valve

• 12 Per Pack

Product No. 770-119

Quart Cup Strainer

• 3/4" High Volume Hose.

Product No. Length770-455 10 ft. (3 m)770-447 20 ft. (6 m)770-456 25 ft. (7.6 m)770-457 30 ft. (9 m)

Pro-Finish Air Hose

Product No. 770-438

2 Ft. Flexible Whip

• Includes: Gauge & fittings

Product No. 770-567

Regulator Complete

• Includes: Regulator, pressure relief valve, 3/8"(9.5 mm) fluid hose fitting, pressure pot & lid

Product No. 770-565

• 2.5 (9.5 liter) Gallon Pressure Pot (without lid)

Product No. 770-533

2.5 Gal. Pressure Pot Comp.

Pro-Finish Fluid Hose

Quick Disconnect

Fluid Hose Connector

Enables you to easily convert your Titan Pro-Finish system to a portable pressure fed system.

Large flat mounting platform easily accepts other manufacturers portable turbines for conversion

to a portable pressure fed system. Weighs only 70 lbs (32kg).

Includes: Cart with handle & hose rack

Pneumatic tires

2 1/2 gallon (9.4 l) pressure pot with & regulator

1/4 hp compressor

30 foot (10 m) fluid hose

Pro-Finish TSP SystemProduct No. 773-618

TSP System

Turbine Replacement Filters