W! UL/CSA Listed Box Extenders - Graybar · box extenders. DO cut the flanges off both sides of...
2
Arlington’s non-conductive box extenders extend set back metal or non-metallic electrical boxes up to 1-1/2 inches, the easy way! They work with any single gang device and most steel and non-metallic outlet boxes, and provide a level, fully supported wiring device that’s flush with the wall surface. In steel boxes they prevent arcing and shorting by creating a barrier between the box and device screws. Our newest box extender, the BE1X, has a slightly larger flange that provides extra device support when the wall opening is miscut or oversized. It accommodates midi or maxi cover plates and costs the same as our ‘regular’ single gang BE1. If you normally use a midi plate this is the box extender for you! • Complies with NEC 2014, article 314.20 (set back boxes) • 2-hour fire rating UL/CSA Listed Box Extenders NEW! Large flange BE1X 1 Stauffer Industrial Park Scranton, PA 18517 800/233.4717 Fax 570/562.0646 www.aifittings.com Arlington BE1X Single gang with larger flange Patented THE Answer for Set Back Electrical Boxes Problem:| Set back box Made in USA BE1X BE1 Aahh... Better support for device Oops... Same Cost as BE1 NEW! Larger Perforated Flange BE1 BE1X BE1X Trimmable to fit standard wall plates View Video
Transcript of W! UL/CSA Listed Box Extenders - Graybar · box extenders. DO cut the flanges off both sides of...
Arlington’s non-conductive box extenders
extend set back metal or non-metallic
electrical boxes up to 1-1/2 inches,
the easy way!
They work with any single gang device
and most steel and non-metallic outlet
boxes, and provide a level, fully
supported wiring device that’s flush with
the wall surface. In steel boxes they
prevent arcing and shorting by creating
a barrier between the box and device
screws.
Our newest box extender, the BE1X, has
a slightly larger flange that provides extra
device support when the wall opening is
miscut or oversized. It accommodates
midi or maxi cover plates and costs the
same as our ‘regular’ single gang BE1.
If you normally use a midi plate this is
the box extender for you!
• Complies with NEC 2014,
article 314.20 (set back boxes)
• 2-hour fire rating
UL/CSA Listed Box Extenders
NEW
!
Large flange
BE1X
1 Stauffer Industrial Park
Scranton, PA 18517
800/233.4717
Fax 570/562.0646
www.aifittings.com
Arlington
BE1X
Single gang with larger flange
Patented
THE Answer for Set Back Electrical Boxes
Problem:|
Set back box
Made in USA
BE1X
BE1
Aahh...Better
support
for device
Oops...Same Cost as B
E1
NEW!
Larger Perforated
Flange
BE1 BE1X
BE1X
Trimmable
to fit standard
wall plates
View Video
Flanges on the single-gang BE1
are trimmable...
for multiple
gang boxes
DO NOT cut the flanges off the
outside (left and right)
box extenders.
DO cut the flanges off both sides
of “inner“ BE1 box extender(s).
No BE3 or BE4 Box Extenders on the truck? No worries!
BE1
BE1
BE1X
BE1R
1 Stauffer Industrial Park
Scranton, PA 18517
800/233.4717
Fax 570/562.0646
www.aifittings.com 0714 REV 0216/15M
Arlington
UL/CSA Listed Box ExtendersExtend set back metal or non-metallic electrical boxes up to 1-1/2"
Made in USA
Distributed by
Non-combustible box extendersdeliver 2-hour fire rating
©
2014 A
rlin
gto
n Indust
ries,
Inc.
Patented
BE4
BE3
BE2
View Video
NEW!
Catalog UPC/DEI/NAED Description Std
Number Mfg. #018997 BOX EXTENDERS Pkg
BE1 40160 Single-gang 25
BE1X 40171 Single-gang with larger flange.. 25
Better device support in oversized or miscut wall openings.
BE2 48960 Two-gang 25
BE3 48967 Three-gang 10
BE4 48968 Four-gang 10
Works in handy boxes and 4" square electrical boxes with plaster rings for a
single switch or receptacle. Functions with all standard devices, switches and GFCIs.
BE1R 40160 Fits 3-1/2" and 4" round or octagonal ceiling boxes. 25
Trimmable for shallow boxes or obstructions
