W FLUSH JOINT CASING N&N Drilling Supply Mfr. (800) 334-492767).pdf · 2016-03-31 · 29-30-570...
Transcript of W FLUSH JOINT CASING N&N Drilling Supply Mfr. (800) 334-492767).pdf · 2016-03-31 · 29-30-570...
Description Length Part# Weight (Lb)
AW 1’ 12-AWFJC-1 4AW 2’ 12-AWFJC-2 7AW 3’ 12-AWFJC-3 11AW 5’ 12-AWFJC-5 19AW 10’ 12-AWFJC-10 37
BW 1’ 12-BWFJC-1 7BW 2’ 12-BWFJC-2 15BW 3’ 12-BWFJC-3 22BW 5’ 12-BWFJC-5 35BW 10’ 12-BWFJC-10 71
NW 1’ 12-NWFJC-1 9NW 2’ 12-NWFJC-2 18NW 3’ 12-NWFJC-3 27NW 5’ 12-NWFJC-5 43NW 10’ 12-NWFJC-10 85
HW 1’ 12-HWFJC-1 12HW 2’ 12-HWFJC-2 24HW 3’ 12-HWFJC-3 37HW 5’ 12-HWFJC-5 60HW 10’ 12-HWFJC-10 118
PW 1’ 12-PWFJC-1 14PW 2’ 12-PWFJC-2 29PW 3’ 12-PWFJC-3 44PW 5’ 12-PWFJC-5 70PW 10’ 12-PWFJC-10 144
SW 1’ 12-SWFJC-1 21SW 2’ 12-SWFJC-2 42SW 3’ 12-SWFJC-3 63SW 5’ 12-SWFJC-5 100SW 10’ 12-SWFJC-10 201
W FLUSH JOINT CASING
* Also available with L.H. threading.
* Also available in 1026.
* Please consult factory for special requirements.
B-1
Casing
N&N Drilling Supply Mfr. • (800) 334-4927
Under N&N Drilling’s Total Quality Management program, we reserve the right to modify design and materials without prior notice.
Copyright © 2012 N&N Drilling Supply Manufacturer. All rights reserved. No part of this catalog may be reproduced, by any means, without prior written consent.
N&N Drilling Supply Mfr. • (800) 334-4927
Description Length Part# Weight (Lb)
AW 0.75M 12-AWFJC-0.75M 7AW 1.50M 12-AWFJC-1.50M 18AW 3.00M 12-AWFJC-3.00M 36
BW 0.75M 12-BWFJC-0.75M 14BW 1.50M 12-BWFJC-1.50M 34BW 3.00M 12-BWFJC-3.00M 70
NW 0.75M 12-NWFJC-0.75M 17NW 1.50M 12-NWFJC-1.50M 42NW 3.00M 12-NWFJC-3.00M 85
HW 0.75M 12-HWFJC-0.75M 23HW 1.50M 12-HWFJC-1.50M 58HW 3.00M 12-HWFJC-3.00M 117
PW 0.75M 12-PWFJC-0.75M 28PW 1.50M 12-PWFJC-1.50M 69PW 3.00M 12-PWFJC-3.00M 142
SW 0.75M 12-SWFJC-0.75M 41SW 1.50M 12-SWFJC-1.50M 99SW 3.00M 12-SWFJC-3.00M 200
W FLUSH JOINT CASING(METRIC)
* Also available with L.H. threading.
* Also available in 1026.
* Please consult factory for special requirements.
B-2
Casing
Under N&N Drilling’s Total Quality Management program, we reserve the right to modify design and materials without prior notice.
Copyright © 2012 N&N Drilling Supply Manufacturer. All rights reserved. No part of this catalog may be reproduced, by any means, without prior written consent.
N&N Drilling Supply Mfr. • (800) 334-4927
Description Length Part# Weight (Lb)
BWT 1’ 12-BWTFJC-1 7BWT 2’ 12-BWTFJC-2 15BWT 3’ 12-BWTFJC-3 22BWT 5’ 12-BWTFJC-5 36BWT 10’ 12-BWTFJC-10 71
NWT 1’ 12-NWTFJC-1 9NWT 2’ 12-NWTFJC-2 18NWT 3’ 12-NWTFJC-3 27NWT 5’ 12-NWTFJC-5 43NWT 10’ 12-NWTFJC-10 85
HWT 1’ 12-HWTFJC-1 12HWT 2’ 12-HWTFJC-2 24HWT 3’ 12-HWTFJC-3 37HWT 5’ 12-HWTFJC-5 60HWT 10’ 12-HWTFJC-10 118
PWT 1’ 12-PWTFJC-1 16PWT 2’ 12-PWTFJC-2 33PWT 3’ 12-PWTFJC-3 49PWT 5’ 12-PWTFJC-5 81PWT 10’ 12-PWTFJC-10 144
SWT 1’ 12-SWTFJC-1 21SWT 2’ 12-SWTFJC-2 42SWT 3’ 12-SWTFJC-3 63SWT 5’ 12-SWTFJC-5 100SWT 10’ 12-SWTFJC-10 201
WT FLUSH JOINT CASING
* Also available with L.H. threading.
* Also available in 1026.
* Please consult factory for special requirements.
B-3
Casing
Under N&N Drilling’s Total Quality Management program, we reserve the right to modify design and materials without prior notice.
Copyright © 2012 N&N Drilling Supply Manufacturer. All rights reserved. No part of this catalog may be reproduced, by any means, without prior written consent.
N&N Drilling Supply Mfr. • (800) 334-4927
Description Length Part# Weight (Lb)
BWT 0.75M 12-BWTFJC-0.75M 14BWT 1.50M 12-BWTFJC-1.50M 35BWT 3.00M 12-BWTFJC-3.00M 70
NWT 0.75M 12-NWTFJC-0.75M 17NWT 1.50M 12-NWTFJC-1.50M 42NWT 3.00M 12-NWTFJC-3.00M 84
HWT 0.75M 12-HWTFJC-0.75M 23HWT 1.50M 12-HWTFJC-1.50M 59HWT 3.00M 12-HWTFJC-3.00M 117
PWT 0.75M 12-PWTFJC-0.75M 32PWT 1.50M 12-PWTFJC-1.50M 80PWT 3.00M 12-PWTFJC-3.00M 142
SWT 0.75M 12-SWTFJC-0.75M 41SWT 1.50M 12-SWTFJC-1.50M 99SWT 3.00M 12-SWTFJC-3.00M 200
WT FLUSH JOINT CASING(METRIC)
* Also available with L.H. threading.
* Also available in 1026.
* Please consult factory for special requirements.
B-4
Casing
Under N&N Drilling’s Total Quality Management program, we reserve the right to modify design and materials without prior notice.
Copyright © 2012 N&N Drilling Supply Manufacturer. All rights reserved. No part of this catalog may be reproduced, by any means, without prior written consent.
N&N Drilling Supply Mfr. • (800) 334-4927
HEAT TREATED DRIVE SHOES
Description Part# Weight (Lb)
AW 16-AWDS 2BW 16-BWDS 3BWT 16-BWTDS 3NW 16-NWDS 4NWT 16-NWTDS 4HW 16-HWDS 7HWT 16-HWTDS 7PW 16-PWDS 15PWT 16-PWTDS 15SW 16-SWDS 20SWT 16-SWTDS 20
HEAT TREATED DRIVE SHOES / STEEL CASING CAPS S
* Also available with L.H. threading.
B-5
Drive Shoe
STEEL CASING CAPS
Description Part# Weight (Lb)
AW 16-AWCP 3BW 16-BWCP 5BWT 16-BWTCP 5NW 16-NWCP 6NWT 16-NWTCP 6HW 16-HWCP 8HWT 16-HWTCP 8PW 16-PWCP 10PWT 16-PWTCP 10SW 16-SWCP 15SWT 16-SWTCP 15
* Also available with L.H. threading.
Steel Casing Cap
Under N&N Drilling’s Total Quality Management program, we reserve the right to modify design and materials without prior notice.
Copyright © 2012 N&N Drilling Supply Manufacturer. All rights reserved. No part of this catalog may be reproduced, by any means, without prior written consent.
B-6
N&N Drilling Supply Mfr. • (800) 334-4927
BW CASING CUTTER
ASSEMBLYDescription Part# Weight (Lb)
Casing Cutter Assy 29-30-350 17
BW CASING CUTTER APPLICATIONS
• Used for cutting BW Casing or NWL Rod at anypoint in a drill hole when the entire string cannot be retrieved.
• BWL Rod Box Connection
Under N&N Drilling’s Total Quality Management program, we reserve the right to modify design and materials without prior notice.
Copyright © 2012 N&N Drilling Supply Manufacturer. All rights reserved. No part of this catalog may be reproduced, by any means, without prior written consent.
Retaining Ring29-30-367
Plunger Case29-30-355
Stainless Steel Ball29-30-365
Water Tube29-30-366
Plunger29-30-370
Shear Pin29-30-371
Spring29-30-375
Spring Rest29-30-376
Body29-30-380
Casing Cutter Lug (2)29-30-385Casing Cutter Pin (2)
29-30-386
Set Screw29-30-387
B-7
N&N Drilling Supply Mfr. • (800) 334-4927
NW CASING CUTTER
Retaining Ring29-30-467
Plunger Case29-30-455
Stainless Steel Ball29-30-465
Water Tube29-30-466
Plunger29-30-470
Shear Pin29-30-471
Spring29-30-475
Spring Rest29-30-476
Body29-30-480
Casing Cutter Lug (2)29-30-485Casing Cutter Pin (2)
29-30-486
Set Screw29-30-387
Under N&N Drilling’s Total Quality Management program, we reserve the right to modify design and materials without prior notice.
Copyright © 2012 N&N Drilling Supply Manufacturer. All rights reserved. No part of this catalog may be reproduced, by any means, without prior written consent.
ASSEMBLYDescription Part# Weight (Lb)
Casing Cutter Assy 29-30-450 25
NW CASING CUTTER APPLICATIONS
• Used for cutting NW Casing or HWL Rod at anypoint in a drill hole when the entire string cannot be retrieved.
• NWL Rod Box Connection
B-8
N&N Drilling Supply Mfr. • (800) 334-4927
HW CASING CUTTER
Retaining Ring29-30-567
Stainless Steel Ball29-30-565
Plunger29-30-570
Shear Pin29-30-571
Spring29-30-575
Body29-30-580
Casing Cutter Lug (2)29-30-585
Casing Cutter Pin (2)29-30-586
Under N&N Drilling’s Total Quality Management program, we reserve the right to modify design and materials without prior notice.
Copyright © 2012 N&N Drilling Supply Manufacturer. All rights reserved. No part of this catalog may be reproduced, by any means, without prior written consent.
ASSEMBLYDescription Part# Weight (Lb)
Casing Cutter Assy 29-30-550 38
HW CASING CUTTER APPLICATIONS
• Used for cutting HW / HWT Casing at any point ina drill hole when the entire string cannot be retrieved.
• HWL Rod Box Connection
B-9
N&N Drilling Supply Mfr. • (800) 334-4927
PW CASING CUTTER
SubPHD Rod Box X
HWL Rod Pin
Shear Pin29-30-571
Spring29-30-575
Body29-30-580
Casing Cutter Lug (2)29-30-685
Casing Cutter Pin (2)29-30-586
Under N&N Drilling’s Total Quality Management program, we reserve the right to modify design and materials without prior notice.
Copyright © 2012 N&N Drilling Supply Manufacturer. All rights reserved. No part of this catalog may be reproduced, by any means, without prior written consent.
Plunger29-30-570
ASSEMBLYDescription Part# Weight (Lb)
Casing Cutter Assy 29-30-650 41
PW CASING CUTTER APPLICATIONS
• Used for cutting PW / PWT Casing at any point ina drill hole when the entire string cannot be retrieved.
• PHD Rod Box Connection
RetainingRing29-30-567
StainlessSteel Ball29-30-565
N&N Drilling Supply Mfr. • (800) 334-4927
BW CASING ADVANCER
B-10
Loading Sleeve29-42-340
Under N&N Drilling’s Total Quality Management program, we reserve the right to modify design and materials without prior notice.
Copyright © 2012 N&N Drilling Supply Manufacturer. All rights reserved. No part of this catalog may be reproduced, by any means, without prior written consent.
Driver29-42-350
Spearhead29-42-301
* Please consult factory for special requirements.
ASSEMBLIESGroup Description Part#
A Casing Advancer Assy 29-40-305B Inner Assy 29-41-305
Disk Lock Washer29-42-304
Release Shaft29-42-305
Latch Body29-42-310
Latch Shoe (2)29-42-311
Stop Latch Set29-42-320
Locating Pin (2)29-42-313
Stop Latch Pin29-42-314
Split Cotter Pin (2)29-42-315
Spring (2)29-42-312
Stop Latch Spring29-42-323
Spacer Set29-42-325
Bit Sub29-42-330
BA
Assemblies
N&N Drilling Supply Mfr. • (800) 334-4927
NW CASING ADVANCER
B-11
Loading Sleeve29-42-440
Under N&N Drilling’s Total Quality Management program, we reserve the right to modify design and materials without prior notice.
Copyright © 2012 N&N Drilling Supply Manufacturer. All rights reserved. No part of this catalog may be reproduced, by any means, without prior written consent.
Driver29-42-450
Spearhead29-42-401
* Please consult factory for special requirements.
ASSEMBLIESGroup Description Part#
A Casing Advancer Assy 29-40-405B Inner Assy 29-41-405
Disk Lock Washer29-42-404
Release Shaft29-42-405
Latch Body29-42-410
Latch Shoe (2)29-42-411
Stop Latch Set29-42-420
Locating Pin (2)29-42-413
Stop Latch Pin29-42-414
Split Cotter Pin (2)29-42-315
Spring (2)29-42-412
Stop Latch Spring29-42-323
Spacer Set29-42-425
Bit Sub29-42-430
BA
Assemblies
N&N Drilling Supply Mfr. • (800) 334-4927
HW CASING ADVANCER
B-12
Loading Sleeve29-42-540
Under N&N Drilling’s Total Quality Management program, we reserve the right to modify design and materials without prior notice.
Copyright © 2012 N&N Drilling Supply Manufacturer. All rights reserved. No part of this catalog may be reproduced, by any means, without prior written consent.
Driver29-42-550
Spearhead29-42-401
* Please consult factory for special requirements.
ASSEMBLIESGroup Description Part#
A Casing Advancer Assy 29-40-505B Inner Assy 29-41-505
Disk Lock Washer29-42-404
Release Shaft29-42-405
Latch Body29-42-510
Latch Shoe (2)29-42-511
Stop Latch Set29-42-520
Locating Pin (2)29-42-413
Stop Latch Pin29-42-514
Split Cotter Pin (2)29-42-315
Spring (2)29-42-412
Stop Latch Spring29-42-323
Spacer Set29-42-525
Bit Sub29-42-530
BA
Assemblies
N&N Drilling Supply Mfr. • (800) 334-4927
PW CASING ADVANCER
B-13
Loading Sleeve29-42-640
Under N&N Drilling’s Total Quality Management program, we reserve the right to modify design and materials without prior notice.
Copyright © 2012 N&N Drilling Supply Manufacturer. All rights reserved. No part of this catalog may be reproduced, by any means, without prior written consent.
Driver29-42-650
Spearhead29-42-401
* Please consult factory for special requirements.
ASSEMBLIESGroup Description Part#
A Casing Advancer Assy 29-40-605B Inner Assy 29-41-605
Disk Lock Washer29-42-404
Release Shaft29-42-405
Latch Body29-42-610
Latch Shoe (2)29-42-611
Stop Latch Set29-42-620
Locating Pin (2)29-42-413
Stop Latch Pin29-42-614
Split Cotter Pin (2)29-42-315
Spring (2)29-42-412
Stop Latch Spring29-42-323
Spacer Set29-42-625
Bit Sub29-42-630
BA
Assemblies
N&N Drilling Supply Mfr. • (800) 334-4927
HWT CASING ADVANCER
B-14
Loading Sleeve29-42-540
Under N&N Drilling’s Total Quality Management program, we reserve the right to modify design and materials without prior notice.
Copyright © 2012 N&N Drilling Supply Manufacturer. All rights reserved. No part of this catalog may be reproduced, by any means, without prior written consent.
Driver29-42-555
Spearhead29-42-401
* Please consult factory for special requirements.
ASSEMBLIESGroup Description Part#
A Casing Advancer Assy 29-40-510B Inner Assy 29-41-505
Disk Lock Washer29-42-404
Release Shaft29-42-405
Latch Body29-42-510
Latch Shoe (2)29-42-511
Stop Latch Set29-42-520
Locating Pin (2)29-42-413
Stop Latch Pin29-42-514
Split Cotter Pin (2)29-42-315
Spring (2)29-42-412
Stop Latch Spring29-42-323
Spacer Set29-42-525
Bit Sub29-42-530
BA
Assemblies
N&N Drilling Supply Mfr. • (800) 334-4927
PWT CASING ADVANCER
B-15
Loading Sleeve29-42-640
Under N&N Drilling’s Total Quality Management program, we reserve the right to modify design and materials without prior notice.
Copyright © 2012 N&N Drilling Supply Manufacturer. All rights reserved. No part of this catalog may be reproduced, by any means, without prior written consent.
Driver29-42-655
Spearhead29-42-401
* Please consult factory for special requirements.
ASSEMBLIESGroup Description Part#
A Casing Advancer Assy 29-40-610B Inner Assy 29-41-605
Disk Lock Washer29-42-404
Release Shaft29-42-405
Latch Body29-42-610
Latch Shoe (2)29-42-611
Stop Latch Set29-42-620
Locating Pin (2)29-42-413
Stop Latch Pin29-42-614
Split Cotter Pin (2)29-42-315
Spring (2)29-42-412
Stop Latch Spring29-42-323
Spacer Set29-42-625
Bit Sub29-42-630
BA
Assemblies
N&N Drilling Supply Mfr. • (800) 334-4927
WASH TEES
B-16Under N&N Drilling’s Total Quality Management program, we reserve the right to modify design and materials without prior notice.
Copyright © 2012 N&N Drilling Supply Manufacturer. All rights reserved. No part of this catalog may be reproduced, by any means, without prior written consent.
CASING WASH TEES
Description Part# Weight (Lb)
AW 18-AW-WSHT 6.1BW 18-BW-WSHT 11.8BWT 18-BWT-WSHT 11.8NW 18-NW-WSHT 14.0NWT 18-NWT-WSHT 14.0HW 18-HW-WSHT 19.1HWT 18-HWT-WSHT 19.1PW 18-PW-WSHT 23.0PWT 18-PWT-WSHT 23.0SW 18-SW-WSHT 31.6SWT 18-SWT-WSHT 31.6
* Also available with L.H. threading.
* Please consult factory for special requirements.
WIRELINE WASH TEES
Description Part# Weight (Lb)
AWL 18-AWL-WSHT 6.1BWL 18-BWL-WSHT 7.5NWL 18-NWL-WSHT 9.2HWL 18-HWL-WSHT 13.0PHD 18-PHD-WSHT 19.2ATW 18-ATW-WSHT 5.1BTW 18-BTW-WSHT 6.5NTW 18-NTW-WSHT 8.9HTW 18-HTW-WSHT 12.6
* Also available with L.H. threading.
* Please consult factory for special requirements.
NPT Male Connection
N&N Drilling Supply Mfr. • (800) 334-4927
HEAVY DUTY CASING RETRIEVER
B-17Under N&N Drilling’s Total Quality Management program, we reserve the right to modify design and materials without prior notice.
Copyright © 2012 N&N Drilling Supply Manufacturer. All rights reserved. No part of this catalog may be reproduced, by any means, without prior written consent.
* Please consult factory for special requirements.
Body
Jaw (2)
Cap
ASSEMBLIESCasing Description Part# Weight (Lb)
NW Retriever Assy 41-10-460 23.0HW Retriever Assy 41-10-560 33.0PW Retriever Assy 41-10-660 38.0
REPLACEMENT JAWS
NW Set of Jaws 41-10-465 2.0HW Set of Jaws 41-10-565 3.5PW Set of Jaws 41-10-665 4.5
Cap Screw &Lock Washer
ThreadsPer InchInches MM Lb / 10 Ft Kg / 3 MInches MM
WeightI.D.
WT FLUSH JOINT CASING
O.D.Size
ThreadsPer InchInches MM Lb / 10 Ft Kg / 3 MInches MM
WeightI.D.
W FLUSH JOINT CASING
O.D.Size
* Material: 4130
173239537290
377185
118144201
4.04.04.04.03.03.0
1.90602.37503.00004.00005.00006.0000
2.25002.75003.50004.50005.50006.6250
N&N Drilling Supply Mfr. • (800) 334-4927
CASING SPECIFICATIONS
57.169.988.9
114.3139.7168.2
48.460.376.2
101.6127.0152.4
* Material: 4130
3239537290
7185
118144201
2.52.52.52.52.5
2.37503.00004.00005.00006.0000
2.75003.50004.50005.50006.6250
69.988.9
114.3139.7168.2
BWTNWTHWTPWTSWT
60.376.2
101.6127.0152.4
AWBWNWHWPWSW
Under N&N Drilling’s Total Quality Management program, we reserve the right to modify design and materials without prior notice.
Copyright © 2012 N&N Drilling Supply Manufacturer. All rights reserved. No part of this catalog may be reproduced, by any means, without prior written consent.B-18