W-ALS 50X55 NOTCHING TOOL - NIEDAX GROUP€¦ · Designed for notching holes into the side-rails of...
2
. Designed for notching holes into the side-rails of LLK/LUK channel cable trays and LUE industrial channel trays of at least 60 mm in height. . Standard knockout size is 50 mm by 55 mm in a single notch operation. The size of the opening can be enlarged by repositioning the die. . Burr-free cutting, no filing necessary. Use edge protection tape when needed. . No heat dissipation, no sparks, no fumes. Environmentally friendly. Can be used at any jobsite even when the channel tray has been installed already. . Safe, easy, and reliable handling - up to 75% time savings over conventional cutting using a grinder. . A hand or battery-driven hydraulic tool with a UNF 19 connection thread and a minimum cutting pressure of 65 kN is required for operating the notching tool. W-ALS 50X55 NOTCHING TOOL
Transcript of W-ALS 50X55 NOTCHING TOOL - NIEDAX GROUP€¦ · Designed for notching holes into the side-rails of...
. Designed for notching holes into the side-rails of LLK/LUK channel cable trays and LUE industrialchannel trays of at least 60 mm in height.
. Standard knockout size is 50 mm by 55 mm in a single notch operation. The size of the opening can be enlarged by repositioning the die.
. Burr-free cutting, no fi ling necessary. Use edge protection tape when needed.
. No heat dissipation, no sparks, no fumes. Environmentally friendly. Can be used at any jobsite even when the channel tray has been installed already.
. Safe, easy, and reliable handling - up to 75% time savings over conventional cutting using a grinder.
. A hand or battery-driven hydraulic tool with a UNF 19 connection thread and a minimum cutting pressure of 65 kN is required for operating the notching tool.
W-ALS 50X55NOTCHING TOOL
Niedax GmbH & Co. KG . [email protected]: http://www.niedax-group.com/en/contact/global-contacts/ www.niedax.de
BKS 6
{AUSKLINKWERKZEUG}
Notching Toolwith UNF 19 connection thread
for notching rectangular holes (50 mm x 55 mm) into channel tray side rails
Suitable for: LLK.../LUK... channel cable trays and LUE industrial channel trays of at least 60 mm inheight
W-ALS 50X55
N B
model no. Pack/ Box Qty
EANcode
154142
Weightper 100
240 1
Requires a hydraulic tool with a minimum cutting pressure of 65 kN and a UNF 19 connection thread.
Hydraulic Hand Pump
Suitable for: Knockout Punches BL 20.65 and BL 30.65
HHA 90
112 295
model no. heightH
lengthA
mm mm
Pack/ Box Qty
1
EANcode
872169
Weightper 100
pcs
363
Edge Protection Stripwith steel clamping strip
The edge protection strip should be positioned in personal hazard zones.temperature range -25°C to +70°C
for protecting cut edges for plate thicknesses from 0.75 mm to 4.0 mm
RKBA 5
black 0,8-1,5N K10
model no. color clampingrange
mm
Pack/ Box Qty
10 m
EANcode
077991
Weightper 100
m
4,7
Edge Protection Stripwith steel clamping strip
The edge protection strip should be positioned in personal hazard zones.temperature range -25°C to +70°C
for protecting cut edges for plate thicknesses from 0.75 mm to 4.0 mm
RKBA 6
black 1-2N K10
model no. color clampingrange
mm
Pack/ Box Qty
10 m
EANcode
934805
Weightper 100
m
7,7
You can find the operating manual W-ALS 50X55 on our website under:http://www.niedax.de/en/infocenter/operating-manuals/
