VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP –...

96
2006 Perimeter Road. Greenville, SC 29605 Toll Free: 800/435-9340 – Phone: 864/277-5870 Fax: 864/235-9661 – Website address: www.mclaughlinunderground Email address: [email protected] PARTS MANUAL VX50-500 VX50-500LT E850514 SERIAL NUMBER – V5H0411161893 TO V5H0131172374 5/26/2016 2016 by McLaughlin Group, Inc. All rights reserved. No part of this manual may be reproduced in any form, or by any means without prior written permission of McLaughlin Group, Inc.

Transcript of VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP –...

Page 1: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

2006 Perimeter Road. Greenville, SC 29605

Toll Free: 800/435-9340 – Phone: 864/277-5870

Fax: 864/235-9661 – Website address: www.mclaughlinunderground

Email address: [email protected]

PARTS MANUAL

VX50-500

VX50-500LT

E850514

SERIAL NUMBER – V5H0411161893 TO V5H0131172374

5/26/2016

2016 by McLaughlin Group, Inc.

All rights reserved. No part of this manual may be reproduced in any form, or by any means

without prior written permission of McLaughlin Group, Inc.

Page 2: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

2

Page 3: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

3

Table of Contents DECAL LAYOUT ……………….…………………………………………………………………………………… 7

TRAILER ………………………………………………………………………………………………………………. 16

TRAILER ASSEMBLY……………..………………………………………………………………………………. 18

ELECTRICAL ASSEMBLY……………..…………………………………………………………………………. 20

FUEL TANK ASSEMBLY……………..………………………………………………………………………….. 22

HYDRAULIC PUMP ………………..……………………………………………………………………………… 24

HYDRAULIC PUMP ASSEMBLY……………….………………………………………………………………. 26

HYDRAULIC ARM ASSEMBLY …………………………………………………………………………………. 28

SPOIL TANK/DOOR ASSEMBLY……………….……………………………………………………………… 30

FILTRATION ASSEMBLY…………..…………………………………………………………………………….. 32

TANK SKID ASSEMBLY ………………………………………………………………………………………….. 34

POWERPACK SKID ASSEMBLY ………………………………………………………………………………. 36

CONTROL BOX ASSEMBLY……………………………………………………………………………………… 38

ENCLOSURE ASSEMBLY……………..…………………………………………………………………………… 40

ENGINE ASSEMBLY……………..………………………………………………………………………………….. 42

BLOWER ASSEMBLY ……………………………………………………………………………………………… 44

WATER PUMP ASSEMBLY…………….…………………………………………………………………………. 46

WATER TANK 125GAL ASSEMBLY…………….……………………………………………………………… 48

WATER TANK 205GAL ASSEMBLY……………………………………………………………………………… 50

WATER REEL/ANTIFREEZE ASSEMBLY……………….…………………………………………………….. 52

VAC TOOLS………………….…………………………………………………………………………………………… 54

SUCTION TOOL ASSEMBLY……………..………………………………………………………………………… 56

ROTARY LANCE ASSEMBLY………………..……………………………………………………………………… 58

WASH WAND ASSEMBLY………………..………………………………………………………………………… 60

HOT BOX ASSEMBLY………………..………………………………………………………………………………… 62

STRONGARM ASSEMBLY……………….…………………………………………………………………………… 64

ARROWBOARD ASSEMBLY……………….………………………………………………………………………… 66

ROOT BLOWER MANUAL ………………..………………………………………………………………………… 69

Page 4: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

4

Page 5: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

5

SYSTEM OPERATIONS SPECIFICATIONS

****WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.)

****Refer to Component Manual specific Component Specifications.

PART PART # FIRST

50

HOURS

EVERY

250

HOURS

EVERY

400

HOURS

EVERY

500

HOURS

EVERY

3000

HOURS

EVERY

1

YEAR

ENGINE OIL 15W40

CJ-4

�Daily X

ENGINE COOLANT 50/50 mixture of

PROPYLENE GLYCOL

AND WATER that

meets ASTM D6210

specifications

�Daily

OIL FILTER (KUBOTA) T700077 X X

FUEL FILTER

(KUBOTA)

8090544-07 X

AIR FILTER (KUBOTA) 8090544-12 X X

FUEL-WATER

SEPARATOR FILTER

8090941-01 X

HYDRAULIC OIL INDUSTRIAL TYPE

HYDRAULIC FLUID

�Daily

BLOWER OIL INDUSTRIAL TYPE,

HEAVY DUTY, NON-

DETERGENT MOTOR

OIL

�Daily, X X

WATER PUMP OIL GENERAL PUMP

SERIES 100 OIL or

SAE30, NON-

DETERGENT, MOTOR

OIL

�Daily

DIESEL PARTICULATE

FILTER

X

HYDRAULIC

TEMPERTURE RANGE

0-120°F (-18°-40°C) SAE 10 GRADE HYDRAULIC OIL or DEXTRON II ATF

32-175°F (0-80°C) SAE 20 GRADE HYDRAULIC OIL

3QTS (2.8L)

BLOWER

TEMPERTURE RANGE

30°F (-1°C) AND UNDER SAE 20

30-90°F (-1-32°C) SAE 30

90°F (32°C) AND ABOVE SAE 40

Page 6: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

6

GREASE GUN LUBE POINTS

STRONGARM GREASE POINT ENGINE GREASE POINT

TANK PIVOT TUBE GREASE POINT 4-WAY VALVE GREASE POINT

TRAILER JACK GREASE POINT

Page 7: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

7

J200445 J200435

J20045

DECAL LAYOUT

Page 8: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

8

J200210 J200445

J200425

8049882

DECAL LAYOUT

Page 9: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

9

J200420

J200220

J200810

DECAL LAYOUT

Page 10: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

10

J200423 J200450

J200458 J200455

DECAL LAYOUT

Page 11: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

11

J200423

J200415

J200410 J200473

DECAL LAYOUT

Page 12: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

12

J200440

J200532

DECAL LAYOUT

Page 13: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

13

Page 14: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

14

VX50-500 COMPLETE

Page 15: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

15

Page 16: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

16

VX50-500 TRAILER

Page 17: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

17

VX50-500 TRAILER

Page 18: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

18

TRAILER ASSEMBLY

Page 19: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

19

TRAILER ASSEMBLY

Page 20: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

20

ELECTRICAL ASSEMBLY

Page 21: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

21

ELECTRICAL ASSEMBLY

Page 22: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

22

FUEL TANK ASSEMBLY

Page 23: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

23

FUEL TANK ASSEMBLY

Page 24: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

24

HYDRAULIC PUMP 12V

Page 25: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

25

HYDRAULIC PUMP 12V

Page 26: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

26

HYDRAULIC PUMP ASSEMBLY

Page 27: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

27

HYDRAULIC PUMP ASSEMBLY

Page 28: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

28

HYDRAULIC ARM

ASSEMBLY

Page 29: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

29

HYDRAULIC ARM

ASSEMBLY

Page 30: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

30

SPOIL TANK ASSEMBLY

Page 31: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

31

SPOIL TANK ASSEMBLY

Page 32: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

32

FILTRATION ASSEMBLY

Page 33: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

33

FILTRATION ASSEMBLY

Page 34: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

34

TANK SKID ASSEMBLY

Page 35: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

35

TANK SKID ASSEMBLY

Page 36: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

36

POWERPACK SKID

ASSEMBLY

Page 37: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

37

POWERPACK SKID

ASSEMBLY

Page 38: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

38

CONTROL BOX ASSEMBLY

Page 39: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

39

CONTROL BOX ASSEMBLY

Page 40: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

40

ENCLOSURE ASSEMBLY

Page 41: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

41

ENCLOSURE ASSEMBLY

Page 42: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

42

ENGINE ASSEMBLY

Page 43: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

43

ENGINE ASSEMBLY

Page 44: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

44

BLOWER ASSEMBLY

Page 45: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

45

BLOWER ASSEMBLY

Page 46: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

46

WATER PUMP ASSEMBLY

Page 47: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

47

WATER PUMP ASSEMBLY

Page 48: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

48

WATER TANK ASSEMBLY

50 GALLON

Page 49: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

49

WATER TANK ASSEMBLY

50 GALLON

Page 50: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

50

WATER TANK ASSEMBLY

125 GALLON

Page 51: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

51

WATER TANK ASSEMBLY

125 GALLON

Page 52: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

52

ANTIFREEZE/WATER REEL

ASSEMBLY

Page 53: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

53

ANTIFREEZE/WATER REEL

ASSEMBLY

Page 54: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

54

Page 55: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

55

VACUUM TOOLS LAYOUT

Page 56: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

56

SUCTION TOOL TOOLS

Page 57: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

57

SUCTION TOOL TOOLS

Page 58: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

58

ROTARY LANCE TOOLS

Page 59: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

59

ROTARY LANCE TOOLS

Page 60: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

60

WASH WAND TOOLS

Page 61: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

61

WASH WAND TOOLS

Page 62: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

62

HOT BOX ASSEMBLY OPTIONS

Page 63: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

63

OPTIONS HOT BOX ASSEMBLY

Page 64: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

64

OPTIONS STRONG-ARM

ASSEMBLY

Page 65: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

65

OPTIONS STRONG-ARM

ASSEMBLY

Page 66: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

66

ARROWBOARD ASSEMBLY OPTIONS

Page 67: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

67

OPTIONS ARROWBOARD

ASSEMBLY

Page 68: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

68

Page 69: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

69

Page 70: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

70

Page 71: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

71

Page 72: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

72

Page 73: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

73

Page 74: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

74

Page 75: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

75

Page 76: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

76

Page 77: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

77

Page 78: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

78

Page 79: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

79

Page 80: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

80

Page 81: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

81

Page 82: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

82

Page 83: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

83

Page 84: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

84

Page 85: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

85

Page 86: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

86

Page 87: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

87

Page 88: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

88

Page 89: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

89

Page 90: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

90

Page 91: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

91

Page 92: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

92

Page 93: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

93

FOR SCHEMATICS SEE: www.mclaughlinunderground

Page 94: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

94

Page 95: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

95

Page 96: VX50 500 - VX50 500LT PARTS MANUAL TO GEN3...5 SYSTEM OPERATIONS SPECIFICATIONS **** WATER PUMP – (Remove fill cap and fill crankcase to dot on oil gauge window.) ****Refer to Component

96