VWR STERILE AND NON STERILE CLEANROOM NITRILE GLOVES
4
VWR ® STERILE AND NON STERILE CLEANROOM NITRILE GLOVES Quality tested according to ASTM, FTMS and IEST Standards Provides comfort, protection and tactile sensitivity Yields exceptionally low particle counts Highly resistant to permeation
Transcript of VWR STERILE AND NON STERILE CLEANROOM NITRILE GLOVES
VWR® STERILE AND NON STERILE CLEANROOM NITRILE GLOVES
Quality tested according to ASTM, FTMS and IEST Standards
Provides comfort, protection and tactile sensitivity
Yields exceptionally low particle counts
Highly resistant to permeation
2 VWR | VWR® CLEANROOM STERILE AND NON STERILE NITRILE GLOVES
L R
Size Pk Cat. No.
X-Small 1000 112-4543
Small 1000 112-4544
Medium 1000 112-4545
Large 1000 112-4546
X-Large 1000 112-4547
XX-Large 1000 112-4548
Recommended for ISO Class 4 (FED-STD-209E Class 10/M2.5) or higher cleanrooms.
Size Pk Cat. No.
X-Small 1000 112-4537
Small 1000 112-4538
Medium 1000 112-4539
Large 1000 112-4540
X-Large 1000 112-4541
XX-Large 1000 112-4542
Recommended for ISO Class 5 (FED-STD-209E Class 100/M3.5) or higher cleanrooms.
Case of 200 pairs, individually packed in pairs.
Size Cat. No.
6,0 112-4549
6,5 112-4550
7,0 112-4551
7,5 112-4552
8,0 112-4553
8,5 112-4554
9,0 112-4555
Recommended for ISO Class 5 (FED-STD-209E Class 100/M3.5) or higher cleanrooms.
VWR® CLEANROOM STERILE AND NON STERILE NITRILE GLOVES
VWR® non sterile cleanroom ISO Class 4 nitrile gloves
VWR® non sterile cleanroom ISO Class 5 nitrile gloves
• Provides reliable, durable and comfortable hand protection during demanding cleanroom applications
• Non sterile gloves, ambidextrous with textured finger surface, ISO Class 4 and 5 • Sterile gloves, hand-specific with micro textured surface, Grade A; Endotoxin <20 EU/glove • Textured fingers enhance grip on components • Tapered, beaded cuff provides secure fit • Static-dissipative to inhibit harmful static discharge • Silicone-free material minimises ionic contaminants and Non Volatile Residue (NVR) transfer • Contains no natural rubber latex • AQL level 1.5 for pin holes • Single-use • White
VWR cleanroom nitrile gloves are manufactured from a synthetic copolymer of acrylonitrile, butadiene and methylacrylic acid (components that comply with FDA CFR 21). These gloves exhibit high tensile strength and strong permeation resistance against a wide variety of solvents, acids and bases. Non staining, non smudging gloves reduce the risk of contamination to parts or components being handled by the user, even during prolonged wear.
To support cleanroom donning protocols, gloves are double bagged in sealed polyethylene cleanroom bags. Each carton is double walled. IPA resistant ink is used on bags and carton labels.
Non sterile gloves supplied as 100 per double bag, 10 bags per case. Sterile gloves supplied as 1 pair per pack, 10 packs per intermediate bag, 5 intermediate bags per master bag, 4 master bags per case.
Gloves are rigorously tested and manufactured in an ISO 9001 certified facility under stringent process controls to ensure that each product meets exacting quality standards and performs to specification. Our products are lot controlled and validated through independent lab testing.
The gloves have been subject to an EC Type examination certification in accordance with Article 10 of the PPE Directive (89/686/EEC) and are classified under the PPE Category III Complex Design. Sterilisation by gamma irradiation to SAL 10-6. Certificate of Conformity (CoC), Certificate of Irradation (CoI) and Certificate of Analysis (CoA) are available upon request.
VWR sterile cleanroom Grade A nitrile gloves
3VWR® CLEANROOM STERILE AND NON STERILE NITRILE GLOVES | VWR
Parameter X-Small Small Medium Large X-Large XX-Large
Overall length (mm) 300 - 310
Palm width (mm) 70 - 80 80 -90 90 - 100 100 - 110 110 - 120 120 - 130
Thickness (mm)
Finger 0,12 - 0,18
Palm 0,10 - 0,15
Cuff 0,08 - 0,12
Parameter Size 6,0 Size 6,5 Size 7,0 Size 7,5 Size 8,0 Size 8,5 Size 9,0
Overall length (mm) 300 - 310
Palm width (mm) 73 - 83 79 - 89 84 - 94 90 - 100 96 - 106 103 - 113 110 - 120
Thickness (mm)
Finger 0,12 - 0,18
Palm 0,10 - 0,15
Cuff 0,08 - 0,12
Test item Result Test standard
Physical properties Non sterile Sterile
ISO Class 4 ISO Class 5 Grade A
Tensile strength (MPa) ≥18
ASTM D412Modulus at 300% (MPa) ≤9
Ultimate elongation (%) ≥500
Static dissipative properties
Surface resistivity (max. Ohms at 50% RH) 1011 ASTM D257, ESD S11.11
Electrostatic decay (max. seconds at 50% RH) 2 FTMS 101C-4046
Barrier properties
Freedom from holes (AQL) 1,5 ASTM D5151
Cleanliness properties
Particles (max. ≥0,5 µm/cm2) 400 1500 900
IEST-RP-CC005.4
Extractable ions (max. µg/cm2)
Chloride, Cl- 0,150 0,600 0,600
Nitrate, NO3- 0,100 0,500 0,500
Sulphate, SO42- 0,015 0,200 0,200
Sodium, Na+ 0,050 0,200 0,200
Pottasium, K+ 0,030 0,100 0,100
Calcium, Ca2+ 0,300 0,500 0,500
Aluminium, Al3+ 0,010 0,010 0,010
Ferric, Fe3+ 0,010 0,010 0,010
Zinc, Zn2+ 0,010 0,100 0,100
Copper, Cu2+ 0,0004 0,0004 0,0004
Ammonium, NH4+ 0,005 0,005 -
Bromide, Br- 0,005 0,010 -
Chromium, Cr6+ 0,005 0,005 -
Fluoride, F- 0,005 0,010 -
Lead, Pb2+ 0,005 0,005 -
Lithium, Li+ 0,001 0,010 -
Magnesium, Mg2+ 0,005 0,010 -
Nickel, Ni2+ 0,005 0,005 -
Nitrite, NO2- 0,005 0,010 -
Phosphate, PO43- 0,005 0,010 -
Strontium, Sr2+ 0,005 0,005 -
Tin, Sn4+ 0,005 0,005 -
Non volatile residue (max. µg/cm2)
Solvent IPA 5,0 5,0 5,0
Fourier transform infrared
Silicon, amide & dioctylphthalate Not detected Not detected Not detected
Technical data for VWR sterile and non sterile cleanroom nitrile gloves
VWR non sterile cleanroom ISO Class 4 and 5 nitrile gloves, ambidextrous
VWR sterile cleanroom Grade A nitrile gloves, hand specific
©2017 VWR ZPROVWRI9259-EN
02/2017-MN
-KS
ICON LEGEND
Anti-static
Fully textured
Beaded cuff
Hand Specific
To order, contact your VWR Sales Representative or visit vwr.com.
AmbidetrousTextured fingers
EN 374-2:2003(Level 2)
EN 374-3:2003 0321
L R
Test item CAS No. Result Test standard
Chemical permeation Non sterile Sterile
ISO Class 4 ISO Class 5 Grade A
Sodium hydroxide 40% 1310-73-2 Class 6 Class 6
EN 374-3: 2003
Sulphuric acid 96% 7664-93-9 Class 1 Class 1
n-Heptane 142-82-5 Class 6 Class 1
Isopropyl alcohol, IPA 70% 67-63-0 - Class 1
Hydrogen peroxide 30% 7722-84-1 - Class 3
Acetic acid 50% 64-19-7 - Class 2
Endotoxin
Endotoxin for sterile nitrile gloves <20 EU/glove USP <85> kinematic turbidimetric
GO TO VWR.COM FOR THE LATEST NEWS, SPECIAL OFFERS AND DETAILS OF YOUR LOCAL VWR DISTRIBUTOR
AustraliaVWR International, Pty Ltd.Tel.: 1300 727 696Fax: 1300 135 123Email: [email protected]
ChinaVWR International China Co., LtdTel.:+86-21-5898 6888Fax:+86-21-5855 8801Email: [email protected]
IndiaVWR Lab Products Private LimitedTel.: +91-80-28078400Fax: +91-80-28078410 Email: [email protected]
New ZealandGlobal Science - A VWR CompanyTel.: 0800 734 100Fax: 0800 999 002Email: [email protected]
SingaporeVWR Singapore Pte LtdTel.: +65 6505 0760Fax: +65 6264 3780Email: [email protected]
FranceVWR International S.A.S.Tel.: 0 825 02 30 30 (0,18 € TTC/min)
Fax: 0 825 02 30 35 (0,18 € TTC/min)
Email: [email protected]
GermanyVWR International GmbHFreecall: 0800 702 00 07Fax: 0180 570 22 22*Email: [email protected]*0,14 €/Min. aus d. dt. Festnetz
HungaryVWR International Kft.Tel.: (52) 521-130Fax: (52) 470-069Email: info,[email protected]
Ireland / Northern IrelandVWR International Ltd / VWR International (Northern Ireland) LtdTel.: 01 88 22 222Fax: 01 88 22 333Email: [email protected]
ItalyVWR International S.r.l.Tel.: 02-3320311Fax: 800 152999/02-40090010Email: [email protected]
AustriaVWR International GmbHTel.: +43 1 97 002 0Fax: +43 1 97 002 600Email: [email protected]
BelgiumVWR International bvbaTel.: 016 385 011Fax: 016 385 385Email: [email protected]
Czech RepublicVWR International s. r. o.Tel.: +420 321 570 321Fax: +420 321 570 320Email: [email protected]
DenmarkVWR International A/STel.: 43 86 87 88Fax: 43 86 87 90Email: [email protected]
FinlandVWR International OyTel.: 09 80 45 51Fax: 09 80 45 52 00Email: [email protected]
The NetherlandsVWR International B.V.Tel.: 020 4808 400Fax: 020 4808 480Email: [email protected]
NorwayVWR International ASTel.: 02290Fax: 815 00 940 Email: [email protected]
PolandVWR International Sp. z o.o.Tel.: 058 32 38 200Fax. 058 32 38 205Email: [email protected]
PortugalVWR International - Material de Laboratório, LdaTel.: 21 3600 770Fax: 21 3600 798/9Email: [email protected]
SpainVWR International Eurolab S.L.Tel.: 902 222 897Fax: 902 430 657Email: [email protected]
SwedenVWR International ABTel.: 08 621 34 00Fax: 08 621 34 66Email: [email protected]
SwitzerlandVWR International GmbHTel.: 044 745 13 13Fax: 044 745 13 10Email: [email protected]
TurkeyVWR International Laboratuar Teknolojileri Ltd.Şti.Tel.: +90 216 598 2900Fax: +90 216 598 2907Email: [email protected]
UKVWR International LtdCustomer Service CentreTel.: 0800 22 33 44Fax: 01455 55 85 86Email: [email protected]
