Vw0904 Control Kci
Transcript of Vw0904 Control Kci
-
7/29/2019 Vw0904 Control Kci
1/2
Control valves aValve World gives you an upd
of the global cont
Mayor order for Fisher ValvesEmerson has been awarded an order for the
installation of technologically-advanced
Fisher control valves at the Saudi Kayan
petrochemical complex in Al Jubail Industrial
City, Saudi Arabia. For the project, Emerson
will supply 780 Fisher digital control valves
including the largest 42-inch Fisher antisurge
valve ever to be built. Scheduled for
operation in 2010, and with an annual
production capacity exceeding 6 million
metric tons of (petro) chemical products, theSaudi Kayan Petrochemical Company, an
affiliate of the Saudi Basic Industries
Corporation (SABIC), is one of the major
suppliers in the petrochemical industry.The
use of high performance valves in critical
applications is of significant importance to the
profitability of a plant. Fisher digital valves will
enable predictive monitoring of the processes
and digital valve performance, supporting
proactive maintenance that addresses
problems before they become issues that
affect plant performance.The dynamicperformance of the 5-meter, 11,000-kilogram
large valve with Fisher optimized technology
will help ensure a smooth start-up for the
plant in 2010.
Valves for pumpsValve Manufacturer Dorot installed recently a
number of 24" (600 mm) pump Control
valves in Monterrey, Mexico, which is
Mexico's largest industrial city.The new valves
were needed to prevent water hammer
during pump startup, shutoff, and to preventreturning flow (non-slam check feature) in
case of power failure.The pumping system
requirements, which Dorot had to face were
replacing old, bulky piston actuated pump
control valves at the site, thus reducing the
operational costs and improving the
performance of the system. In addition to this
protection against water hammer during
start-up and shutoff procedures had to be
provided, prevention of plug slamming while
performing fast emergency closure in case ofpower failure, and achieving fast and slam
free closure, in a low pressure-loss control
valve. In order to solve Monterreys
challenges, Dorot installed 24" ( 600 mm),
hydraulically operated, booster pump control
valves, on 4 of the supply pumps to the
municipal reservoirs in 2 different pump
stations.
Valves for AngolaDresser Masoneilans control valves have
been selected for the Angola LNG Project.The contract was awarded by Bechtels Oil,
Gas & Chemicals global business unit
(Bechtel), which holds the engineering,
procurement and construction contract for
the onshore portion of the project. Dresser
Masoneilan will provide general service
control valves, including 21000 Series and
41005 Series reciprocating globe valves and
35002 Series Camflex II rotary globe valves,
for use in a variety of applications throughout
the plant. The first valves are expected to be
delivered starting the summer of 2009.
Located near Soyo, a coastal community
north of Luanda in Angolas Zaire Province,
the single LNG train will produce LNG; LPGs,
such as propane and butane; condensate, and
domestic pipeline gas. It will have an annual
production capacity of 6.8 billion cum.
Construction began earlier this year, and
production is expected to begin in early
2012.
New facility in the USATyco Flow Control, a business segment of
Tyco International Ltd has purchased an
118,000sq/ft facility in Mansfield,
Massachusetts, USA.The purchase is part of a
more than USD 20 million investment plan toDorot series 300 valves in Monterrey, Mexico
CONTROL & SMART VALVES
www.valve-world.net46 April 2009
-
7/29/2019 Vw0904 Control Kci
2/2
l over the worldte on the latest developmentsol valves industry
relocate its existing operations in Wrentham,
Massachusetts, to a new, modern facility insupport of its Valves & Controls nuclear
power generation business strategy.The new
Mansfield site, scheduled to be producing in
fourth quarter of 2009, will provide a full
range of critical flow control safety related
services and products, including main steam
safety valves, pressurized safety valves,
vacuum breakers and instrumentation valves
and manifolds, butterfly valves and control
valves.The operation will include engineering,
design, quality, inspection, machining, assembly
and testing. Dedicated engineering andtechnical staff will continue to provide a full
range of design control and in-house and on-
site technical support and services for both
new and existing American Society of
Mechanical Engineers valve applications for
commercial nuclear power generation plants
as well as MIL-SPEC relief valves, check valves
and strainers used in a wide range of ship
system applications for the U.S. Navy.Tyco
will employ approximately 80 full-time
employees at its relocated facility and
anticipates creating additional positions in
future years, including both engineering
professionals and manufacturing positions.
New control valve seriesDue to customer requests, Red Dragon hasadded the SX70 series Chemical Control
Solenoid Valve.The Plastic body is ideal for
controlling chemicals, where a brass body
would normally be damaged due to corrosion.
An added feature are the 6mm hose tails,
which are part of the main body, preventing
leaks and the extra cost of fittings.VITON seals
close over the internal 2.2mm orifice. Pressure
range is 0-5 Bar for AC or DC power supplies.
Standard voltages are 24VDC, 24VAC and
230VAC. In detail the SX 70 consists of a
plastic body with integral 6mm hose tail ends,
VITON seals, Gauze filter on valve inlet, unsed
body mounting with 2x self tapping screws,
and lightweight and cost effective design.
Joint venture in Saudi ArabiaFlowserve Corporation, a leading provider of
flow control products and services for the
global infrastructure markets, has signed a joint
venture agreement with S&A Abahsain Co.
Ltd., a diverse Saudi Arabian business entity,
spanning industry, trading, construction, real
estate and services. Building on existing joint
ventures with the Flowserve Pump and Sealdivisions,Abahsain and Flowserve have
expanded their relationship to include the
manufacturing of control valves, ball valves,
plug valves, butterfly valves, and electric and
pneumatic actuators for the oil and gas,
petrochemical, power and water industries.
The joint venture, called Flowserve/Abahsain
Flow Control Company Ltd., will begin initial
manufacturing from a temporary facility in Al
Khobar, Saudi Arabia. A new facility capable of
manufacturing the full line of valve products is
planned to be constructed in Dammam in
2009, and is expected to be operational by
January 2010.
CONTROL & SMART VALVES
www.valve-world.net April 2009 47