VOLVO XC70 Owner's Manual...VOLVO XC70 Owner's Manual Web Edition Welcome to the world-wide family...
Transcript of VOLVO XC70 Owner's Manual...VOLVO XC70 Owner's Manual Web Edition Welcome to the world-wide family...
Welcome to the world-wide family of Volvo owners. We trust that youwill enjoy many years of safe driving in your Volvo, an automobiledesigned with your safety and comfort in mind. We encourage youto familiarize yourself with the equipment descriptions and operatinginstructions in this manual.
We also urge you and your passengers to wear seat belts at all timesin this (or any other) vehicle. And, of course, please do not operate a
vehicle if you may be affected by alcohol, medication or any impair-ment that could hinder your ability to drive.
Your Volvo is designed to meet all applicable federal safety andemission standards. If you have any questions regarding your vehicle,please contact your Volvo retailer or see the section "ContactingVolvo" in this manual's "Introduction" chapter for information on get-ting in touch with Volvo in the United States and Canada.
Contents
4
0000 Introduction
Important information................................. 8Environment.............................................. 12Important warnings................................... 13
0101 Safety
Occupant safety........................................ 16Reporting safety defects........................... 17Seat belts ................................................. 18Supplemental Restraint System (SRS) .. . . 21Occupant Weight Sensor ......................... 26Side impact protection (SIPS) airbags ..... 30Inflatable Curtain (IC) ............................... 32Whiplash Protection System – WHIPS..... 33Crash mode.............................................. 35Child safety............................................... 36Child restraint systems............................. 38Infant seats............................................... 40Convertible seats...................................... 42Booster cushions...................................... 44ISOFIX/LATCH lower anchors.................. 45Top tether anchors.................................... 46Child restraint registration and recalls...... 47Integrated booster cushion....................... 48Child safety locks...................................... 51
0202 Locks and alarm
Remote key and key blade....................... 54Private locking ......................................... 61Keyless drive............................................. 62Locks........................................................ 65Alarm......................................................... 68
Contents
* Option/accessory, for more information, see Introduction. 5
0303 Your driving environment
Instruments and controls.......................... 72Ignition modes.......................................... 79Seats......................................................... 81Steering wheel.......................................... 87Lighting..................................................... 88Wipers and washers................................. 94Power windows......................................... 97Mirrors....................................................... 99Compass*............................................... 101Power moonroof* ................................... 102HomeLink® Wireless Control System*... 104Starting the engine.................................. 107Transmission........................................... 111Brakes..................................................... 114Parking brake.......................................... 116Hill Descent Control (HDC)*.................... 119
0404 Comfort and driving pleasure
Menus and messages............................. 124Climate system....................................... 128Audio system.......................................... 135Bluetooth® hands-free connection......... 149Trip computer......................................... 155Stability system....................................... 157Active chassis system–Four C*............... 159Cruise control.......................................... 160Adaptive Cruise Control (ACC)*.............. 162Distance Alert* ....................................... 171Collision warning with Auto-brake*......... 174Driver Alert System* ............................... 180Park assist*............................................. 185Rear Park Assist Camera (PAC)* ............ 189Blind Spot Information System*.............. 192Passenger compartment convenience.. . 196
0505 During your trip
Driving recommendations....................... 202Refueling................................................. 206Loading................................................... 211Cargo area ............................................. 216Towing a trailer....................................... 220Emergency towing.................................. 222
Contents
6
0606 Wheels and tires
General information ............................... 226Tire inflation............................................. 229Inflation pressure—U.S. models ............ 231Inflation pressure—Canadian models..... 232Tire designations .................................... 233Glossary of tire terminology ................... 235Vehicle loading ....................................... 236Uniform Tire Quality Grading ................. 238Snow chains, snow tires, studded tires . 239Temporary Spare ................................... 240Tire Sealing System................................ 241Changing a wheel .................................. 247Tire Pressure Monitoring System (TPMS) 250 07
07 Maintenance andspecifications
Volvo maintenance.................................. 256Maintaining your car............................... 257Hood and engine compartment.............. 259Engine oil................................................ 260Fluids...................................................... 262Replacing bulbs...................................... 264Wiper blades and washer fluid................ 271Battery..................................................... 273Fuses...................................................... 276Vehicle care............................................. 284 08
08 Specifications
Label information.................................... 292Specifications......................................... 294Overview of information and warning sym-bols......................................................... 301Volvo programs....................................... 304
Introduction
Important information
8
Contacting Volvo
In the USA:
Volvo Cars of North America, LLC
Customer Care Center
1 Volvo Drive,
P.O. Box 914
Rockleigh, New Jersey 07647
1-800-458-1552
www.volvocars.us
In Canada:
Volvo Cars of Canada Corp
National Customer Service
175 Gordon Baker Road
North York, Ontario M2H 2N7
1-800-663-8255
www.volvocanada.com
About this manual
• Before you operate your vehicle for the firsttime, please familiarize yourself with theinformation found in the chapters "YourDriving Environment" and "During YourTrip."
• Information contained in the balance of themanual is extremely useful and should beread after operating the vehicle for the firsttime.
• The manual is structured so that it can beused for reference. For this reason, itshould be kept in the vehicle for readyaccess.
Footnotes
Certain pages of this manual contain informa-tion in the form of footnotes at the bottom ofthe page. This information supplements thetext that the footnote number refers to (a letteris used if the footnote refers to text in a table).
Display texts
There are several displays in the driver’s fieldof vision that show messages generated byvarious systems and functions in the vehicle.These texts are indicated in the Owner’s Man-ual by being in slightly larger type than the sur-rounding text and are printed in gray, (forexample: Doors automatic lock).
Decals
There are various types of decals in the vehiclewhose purpose is to provide important infor-mation in a clear and concise way. The impor-tance of these decals is explained as follows,in descending order of importance.
Risk of injury
G031590
Black ISO symbols on a yellow warning back-ground, white text/image on a black back-ground. Decals of this type are used to indicatepotential danger. Ignoring a warning of thistype could result in serious injury or death.
Introduction
Important information
9
Risk of damage to the vehicle
G031592
White ISO symbols and white text/image on ablack or blue warning background and spacefor a message. If the information on decals ofthis type is ignored, damage to the vehiclecould result.
Information
G031593
White ISO symbols and white text/image on ablack background. These decals provide gen-eral information.
NOTE
The decals shown in the Owner’s Manualare examples only and are not intended tobe reproductions of the decals actually usedin the vehicle. The purpose is to give an indi-cation of how they look and their approxi-mate location in the vehicle. The applicableinformation for your particular vehicle canbe found on the respective decals in thevehicle.
Types of lists used in the manual
Procedures
Procedures (step-by-step instructions), oractions that must be carried out in a certainorder, are arranged in numbered lists in thismanual.
If there is a series of illustrations associatedwith step-by-step instructions, each stepin the procedure is numbered in the sameway as the corresponding illustration.
Lists in which letters are used can be foundwith series of illustrations in cases wherethe order in which the instructions are car-ried out is not important.
Arrows with or without numbers are usedto indicate the direction of a movement.
If there are no illustrations associated with astep-by-step list, the steps in the procedureare indicated by ordinary numbers.
Position lists
Red circles containing a number are usedin general overview illustrations in whichcertain components are pointed out. Thecorresponding number is also used in theposition list's description of the variouscomponents.
Introduction
Important information
10
Bullet lists
Bullets are used to differentiate a number ofcomponents/functions/points of informationthat can be listed in random order.
For example:
• Coolant
• Engine oil
Continued
�� �This symbol can be found at the lower rightcorner of an odd-numbered (right-hand) pageto indicate that the current topic is continuedon the following page.
Options and accessories
Optional or accessory equipment described inthis manual is indicated by an asterisk.
Optional or accessory equipment may not beavailable in all countries or markets. Pleasenote that some vehicles may be equipped dif-ferently, depending on special legal require-ments.
Contact your Volvo retailer for additional infor-mation.
NOTE
• All information, illustrations and specifi-cations contained in this manual arebased on the latest product informationavailable at the time of publication.
• Volvo reserves the right to make modelchanges at any time, or to change spec-ifications or design without notice andwithout incurring obligation.
• Do not export your Volvo to anothercountry before investigating that coun-try's applicable safety and emissioncontrol requirements. In some cases itmay be difficult or impossible to complywith these requirements. Modificationsto the emission control system(s) mayrender your Volvo not certifiable forlegal operation in the U.S., Canada andother countries.
WARNING
If your vehicle is involved in an accident,unseen damage may affect its drivabilityand safety.
WARNING
CALIFORNIA proposition 65
Engine exhaust, some of its constituents,and certain vehicle components contain oremit chemicals known to the state of Cali-fornia to cause cancer, and birth defects orother reproductive harm. In addition, certainfluids contained in vehicles and certainproducts of component wear contain oremit chemicals known to the State of Cali-fornia to cause cancer, and birth defects orother reproductive harm.
WARNING
Certain components of this vehicle such asair bag modules, seat belt pretensioners,adaptive steering columns, and button cellbatteries may contain Perchlorate material.Special handling may apply for service orvehicle end of life disposal.
See www.dtsc.ca.gov/hazardouswaste/perchlorate.
Introduction
Important information
11
Shiftlock
When your vehicle is parked, the gear selectoris locked in the P (Park) position. To release theselector from this position, the ignition must bein mode II (see page 79) or the engine mustbe running. Depress the brake pedal, press thebutton on the front side of the gear selector andmove the selector from P (Park).
Keylock
When you switch off the ignition, the gearselector must be in the P (Park) position beforethe remote key can be removed from the igni-tion slot.
Anti-lock Brake System (ABS)
The ABS system performs a brief self-diagnos-tic test when the engine has been started anddriver releases the brake pedal. Another auto-matic test may be performed when the vehiclefirst reaches a speed of approximately 25 mph(40 km/h). The brake pedal will pulsate severaltimes and a sound may be audible from theABS control module. This is normal.
Fuel filler door
Press the button on the light switch panel (seethe illustration on page 208) when the vehicleis at a standstill to unlock the fuel filler door.Please note that the fuel filler door will remainunlocked until the vehicle begins to move for-ward. An audible click will be heard when thefuel filler door relocks.
Fuel filler cap
The fuel filler door, located on the right rearquarter panel, is connected to your vehicle'scentral locking system.
Points to keep in mind
• Do not export your Volvo to another coun-try before investigating that country'sapplicable safety and exhaust emissionrequirements. In some cases it may be dif-ficult or impossible to comply with theserequirements. Modifications to the emis-sion control system(s) may render yourVolvo not certifiable for legal operation inthe U.S., Canada and other countries.
• All information, illustrations and specifica-tions contained in this manual are based onthe latest product information available atthe time of publication. Please note thatsome vehicles may be equipped differ-ently, depending on special legal require-ments. Optional equipment described inthis manual may not be available in all mar-kets.
• Volvo reserves the right to make modelchanges at any time, or to change specifi-cations or design without notice and with-out incurring obligation.
Vehicle event data (Black box)
Your vehicle's driving and safety systemsemploy computers that monitor, and sharewith each other, information about your vehi-cle's operation. One or more of these comput-ers may store what they monitor, either duringnormal vehicle operation or in a crash or near-crash event. Stored information may be readand used by:
• Volvo Car Corporation
• service and repair facilities
• law enforcement or government agencies
• others who may assert a legal right toknow, or who obtain your consent to knowsuch information.
Introduction
Environment
12
Volvo and the environment
Volvo is committed to the well being of its cus-tomers. As a natural part of this commitment,we care about the environment in which we alllive. Caring for the environment means aneveryday involvement in reducing our environ-mental impact. Volvo's environmental activitiesare based on a holistic view, which means weconsider the overall environmental impact of aproduct throughout its complete life cycle. Inthis context, design, production, product use,and recycling are all important considerations.In production, Volvo has partly or completelyphased out several chemicals including CFCs,lead chromates, asbestos, and cadmium; andreduced the number of chemicals used in ourplants 50% since 1991.
Volvo was the first in the world to introduce intoproduction a three-way catalytic converter witha Lambda sond, now called the heated oxygensensor, in 1976. The current version of thishighly efficient system reduces emissions ofharmful substances (CO, HC, NOx) from theexhaust pipe by approximately 95 – 99% andthe search to eliminate the remaining emis-sions continues. Volvo is the only automobilemanufacturer to offer CFC-free retrofit kits forthe air conditioning system of all models as farback as the 1975 model 240. Advanced elec-tronic engine controls and cleaner fuels arebringing us closer to our goal. In addition to
continuous environmental refinement of con-ventional gasoline-powered internal combus-tion engines, Volvo is actively looking atadvanced technology alternative-fuel vehicles.
When you drive a Volvo, you become our part-ner in the work to lessen the car's impact onthe environment. To reduce your vehicle'senvironmental impact, you can:
• Maintain proper air pressure in your tires.Tests have shown decreased fuel econ-omy with improperly inflated tires.
• Follow the recommended maintenanceschedule in your Warranty and ServiceRecords Information booklet.
• Drive at a constant speed whenever pos-sible.
• See a trained and qualified Volvo servicetechnician as soon as possible for inspec-tion if the check engine (malfunction indi-cator) light illuminates, or stays on after thevehicle has started.
• Properly dispose of any vehicle-relatedwaste such as used motor oil, used batter-ies, brake pads, etc.
• When cleaning your vehicle, please usegenuine Volvo car care products. All Volvocar care products are formulated to beenvironmentally friendly.
Recycling
As part of Volvo’s commitment to the environ-ment, it is essential for the vehicle to be recy-cled in an environmentally sound way. Almostthe entire vehicle can be recycled and for thatreason, the vehicle’s final owner is requestedto contact a Volvo retailer for information aboutapproved and certified recycling facilities.
Introduction
Important warnings
13
Driver distraction
A driver has a responsibility to do everythingpossible to ensure his or her own safety andthe safety of passengers in the vehicle and oth-ers sharing the roadway. Avoiding distractionsis part of that responsibility.
Driver distraction results from driver activitiesthat are not directly related to controlling thevehicle in the driving environment. Your newVolvo is, or can be, equipped with many fea-ture-rich entertainment and communicationsystems. These include hands-free cellular tel-ephones, navigation systems, and multipur-pose audio systems. You may also own otherportable electronic devices for your own con-venience. When used properly and safely, theyenrich the driving experience. Improperly used,any of these could cause a distraction.
For all of these systems, we want to provide thefollowing warning that reflects the strong Volvoconcern for your safety. Never use these devi-ces or any feature of your vehicle in a way thatdistracts you from the task of driving safely.Distraction can lead to a serious accident. Inaddition to this general warning, we offer thefollowing guidance regarding specific newerfeatures that may be found in your vehicle
• Never use a hand-held cellular telephonewhile driving. Some jurisdictions prohibit
cellular telephone use by a driver while thevehicle is moving.
• If your vehicle is equipped with a naviga-tion system, set and make changes to yourtravel itinerary only with the vehicle parked.
• Never program your audio system whilethe vehicle is moving. Program radio pre-sets with the vehicle parked, and use yourprogrammed presets to make radio usequicker and simpler.
• Never use portable computers or personaldigital assistants while the vehicle is mov-ing.
Accessory installation
• We strongly recommend that Volvo ownersinstall only genuine, Volvo-approvedaccessories, and that accessory installa-tions be performed only by a trained andqualified Volvo service technician.
• Genuine Volvo accessories are tested toensure compatibility with the performance,safety, and emission systems in your vehi-cle. Additionally, a trained and qualifiedVolvo service technician knows whereaccessories may and may not be safelyinstalled in your Volvo. In all cases, pleaseconsult a trained and qualified Volvo serv-ice technician before installing any acces-sory in or on your vehicle.
• Accessories that have not been approvedby Volvo may or may not be specificallytested for compatibility with your vehicle.Additionally, an inexperienced installermay not be familiar with some of your car'ssystems.
• Any of your car's performance and safetysystems could be adversely affected if youinstall accessories that Volvo has not tes-ted, or if you allow accessories to be instal-led by someone unfamiliar with your vehi-cle.
• Damage caused by unapproved orimproperly installed accessories may notbe covered by your new vehicle warranty.See your Warranty and Service RecordsInformation booklet for more warrantyinformation. Volvo assumes no responsi-bility for death, injury, or expenses thatmay result from the installation of non-gen-uine accessories.
14
Occupant safety...................................................................................... 16Reporting safety defects......................................................................... 17Seat belts ............................................................................................... 18Supplemental Restraint System (SRS) ................................................... 21Occupant Weight Sensor ....................................................................... 26Side impact protection (SIPS) airbags ................................................... 30Inflatable Curtain (IC) ............................................................................. 32Whiplash Protection System – WHIPS................................................... 33Crash mode............................................................................................ 35Child safety............................................................................................. 36Child restraint systems........................................................................... 38Infant seats.............................................................................................. 40Convertible seats.................................................................................... 42Booster cushions.................................................................................... 44ISOFIX/LATCH lower anchors................................................................. 45Top tether anchors.................................................................................. 46Child restraint registration and recalls.................................................... 47Integrated booster cushion..................................................................... 48Child safety locks.................................................................................... 51
01 Safety
Occupant safety 01
16
Volvo's concern for safety
Safety is Volvo's cornerstone. Our concerndates back to 1927 when the first Volvo rolledoff the production line. Three-point seat belts(a Volvo invention), safety cages, and energy-absorbing impact zones were designed intoVolvo vehicles long before it was fashionableor required by government regulation.
We will not compromize our commitment tosafety. We continue to seek out new safetyfeatures and to refine those already in our vehi-cles. You can help. We would appreciate hear-ing your suggestions about improving automo-bile safety. We also want to know if you everhave a safety concern with your vehicle. Call usin the U.S. at: 1-800-458-1552 or in Canada at:1-800-663-8255.
Occupant safety reminders
How safely you drive doesn't depend on howold you are but rather on:
• How well you see.
• Your ability to concentrate.
• How quickly you make decisions understress to avoid an accident.
The following suggestions are intended to helpyou cope with the ever changing traffic envi-ronment.
• Never drink and drive.
• If you are taking any medication, consultyour physician about its potential effectson your driving abilities.
• Take a driver-retraining course.
• Have your eyes checked regularly.
• Keep your windshield and headlightsclean.
• Replace wiper blades when they start toleave streaks.
• Take into account the traffic, road, andweather conditions, particularly withregard to stopping distance.
01 Safety
Reporting safety defects 01
17
Reporting safety defects in the U.S.
If you believe that your vehicle has adefect which could cause a crash orcould cause injury or death, youshould immediately inform theNational Highway Traffic SafetyAdministration (NHTSA) in addition tonotifying Volvo Cars of North Amer-ica, LLC. If NHTSA receives similarcomplaints, it may open an investiga-tion, and if it finds that a safety defectexists in a group of vehicles, it mayorder a recall and remedy campaign.However, NHTSA cannot becomeinvolved in individual problemsbetween you, your retailer, or VolvoCars of North America, LLC. To con-tact NHTSA, you may either call theAuto Safety Hotline toll-free at
1-888-327-4236
(TTY: 1-800-424-9153) or write to:NHTSA, U.S. Department of Trans-portation, Washington D.C. 20590.
You can also obtain other informationabout motor vehicle safety from:
http://www.safercar.gov
Volvo strongly recommends that ifyour vehicle is covered under a serv-ice campaign, safety or emissionrecall or similar action, it should becompleted as soon as possible.Please check with your local retaileror Volvo Cars of North America, LLCif your vehicle is covered under theseconditions.
NHTSA can be reached at:
Internet:
http://www.nhtsa.gov
Telephone:
1-888-DASH-2-DOT(1-888-327-4236).
Reporting safety defects in Canada
If you believe your vehicle has a defect thatcould cause a crash or could cause injury ordeath, you should immediately inform Trans-port Canada in addition to notifying Volvo Carsof Canada Corp.
To contact Transport Canada, call(800) 333 – 0510, or (613) 993 – 9851 if you arecalling from the Ottawa region.
01 Safety
Seat belts 01
18
General information
Adjusting the seat belt
Seat belts should always be worn by all occu-pants of your vehicle. Children should be prop-erly restrained, using an infant, car, or boosterseat determined by age, weight and height.
Volvo also believes no child should sit in thefront seat of a vehicle.
Most states and provinces make it mandatoryfor occupants of a vehicle to use seat belts.
Seat belt pretensioners
All seat belts are equipped with pretensionersthat reduce slack in the belts. These preten-sioners are triggered in situations where thefront or side impact airbags deploy, and in cer-tain impacts from the rear. The front seat beltsalso include a tension reducing device which,
in the event of a collision, limits the peak forcesexerted by the seat belt on the occupant.
Fastening a seat belt
Buckling
Pull the belt out far enough to insert the latchplate into the receptacle until a distinct click isheard. The seat belt retractor is normally"unlocked" and you can move freely, providedthat the shoulder belt is not pulled out too far.
Seat belt retractor
The seat belt retractor will lock up in the fol-
lowing situations:
• if the belt is pulled out rapidly
• during braking and acceleration
• if the vehicle is leaning excessively
• when driving in turns
• if the Automatic Locking Retractor/Emer-gency Locking Retractor (ALR/ELR) is acti-vated
NOTE
Each seat belt (except for the driver's belt)is equipped with the ALR/ELR function,which is designed to help keep the seat belttaut. ALR/ELR activates if the seat belt ispulled out as far as possible. If this is done,a sound from the seat belt retractor will beaudible, which is normal, and the seat beltwill be pulled taut and locked in place. Thisfunction is automatically disabled when theseat belt is unbuckled and fully retracted.
See also page See page 37 for informationabout using a seat belt's ALR/ELR function toanchor a child seat.
When wearing the seat belt remember:
• The belt should not be twisted or turned.
• The lap section of the belt must be posi-tioned low on the hips (not pressing againstthe abdomen).
• Make sure that the shoulder belt is rolledup into its retractor and that the shoulderand lap belts are taut.
Unbuckling the seat belt
To remove the seat belt, press the red sectionon the seat belt receptacle. Before exiting thevehicle, check that the seat belt retracts fullyafter being unbuckled. If necessary, guide thebelt back into the retractor slot.
01 Safety
Seat belts 01
��
19
Seat belt maintenance
Check periodically that the seat belts are ingood condition. Use water and a mild deter-gent for cleaning. Check seat belt mechanismfunction as follows: attach the seat belt and pullrapidly on the strap.
WARNING
Never use a seat belt for more than oneoccupant. Never wear the shoulder portionof the belt under the arm, behind the backor otherwise out of position. Such use couldcause injury in the event of an accident. Asseat belts lose much of their strength whenexposed to violent stretching, they shouldbe replaced after any collision, even if theyappear to be undamaged.
WARNING
• Never repair the belt yourself; have thiswork done by a trained and qualifiedVolvo service technician only.
• Any device used to induce slack into theshoulder belt portion of the three-pointbelt system will have a detrimentaleffect on the amount of protection avail-able to you in the event of a collision.
• The seat back should not be tilted toofar back. The shoulder belt must be tautin order to function properly.
• Do not use child safety seats or childbooster cushions/backrests in the frontpassenger's seat. We also recommendthat children who have outgrown thesedevices sit in the rear seat with the seatbelt properly fastened.
Seat belt reminder
G01
7726
Seat belt reminder light in ceiling console
The seat belt reminder consists of an audiblesignal, an indicator light near the rearview mir-ror and a symbol in the instrument panel thatalert all occupants of the vehicle to fasten theirseat belts. The audible signal and indicatorlight will be on for a total of 6 seconds from thetime the ignition is switched on, regardless of
whether or not the seat belts are fastened.
If the front seat belts are unbuckled while thevehicle is in motion, the audible signal andwarning light will be active for a total of 6 sec-onds.
Rear seats
The seat belt reminder in the rear seat has twoadditional functions:
01 Safety
Seat belts 01
20
• It provides information about which seatbelts are fastened in the rear seat. A mes-sage will appear in the information displaywhen a belt is being used. This messagewill disappear after approximately 6 sec-onds or can be erased by pressing theREAD button on the left steering wheellever.
• It also provides a reminder if one of theoccupants of the rear seat has unbuckledhis/her seat belt while the vehicle is inmotion. A visual and audible signal will begiven. These signals will stop when theseat belt has been re-buckled or can bestopped by pressing the READ button.
• The message Unbelted in rear seat willappear in the information display if one ofthe rear doors has been opened.
The message in the information display canalways be accessed, even if it has been erased,by pressing the READ button to display storedmessages.
Seat belt use during pregnancy
G02
0998
The seat belt should always be worn duringpregnancy. But it is crucial that it be worn in thecorrect way. The diagonal section should wrapover the shoulder then be routed between thebreasts and to the side of the belly. The lapsection should lay flat over the thighs and aslow as possible under the belly. It must neverbe allowed to ride upward. Remove all slackfrom the belt and ensure that it fits close to thebody without any twists.
As a pregnancy progresses, pregnant driversshould adjust their seats and steering wheelsuch that they can easily maintain control of thevehicle as they drive (which means they mustbe able to easily operate the foot pedals andsteering wheel). Within this context, theyshould strive to position the seat with as large
a distance as possible between their belly andthe steering wheel.
Child seats
Please refer to page 38 for information onsecuring child seats with the seat belts.
01 Safety
Supplemental Restraint System (SRS) 01
��
21
General information
G02
2831
Warning symbols in the instrument panel
As an enhancement to the three-point seatbelts, your Volvo is equipped with a Supple-mental Restraint System (SRS). Volvo's SRSconsists of seat belt pretensioners, front air-bags, side impact airbags, a front passengeroccupant weight sensor, and inflatable cur-tains. All of these systems are monitored by theSRS control module. An SRS warning light inthe instrument panel (see the illustration) illu-minates when the ignition is in modes I, II, orIII, and will normally go out after approximately6 seconds if no faults are detected in the sys-tem.
Where applicable, a text message will also bedisplayed when the SRS warning light illumi-nates. If this warning symbol is not functioning
properly, the general warning symbol illumi-nates and a text message will be displayed.See also page 74 and page 76 for moreinformation about indicator and warning sym-bols.
WARNING
• If the SRS warning light stays on afterthe engine has started or if it illuminateswhile you are driving, have the vehicleinspected by a trained and qualifiedVolvo service technician as soon aspossible.
• Never try to repair any component orpart of the SRS yourself. Any interfer-ence in the system could cause mal-function and serious injury. All work onthese systems should be performed bya trained and qualified Volvo servicetechnician.
WARNING
If your vehicle has been subjected to floodconditions (e.g., soaked carpeting/standingwater on the floor of the vehicle) or if yourvehicle has become flood-damaged in anyway, do not attempt to start the vehicle orinsert the remote key into the ignition slotbefore disconnecting the battery (seebelow). This may cause airbag deploymentwhich could result in personal injury. Havethe vehicle towed to a trained and qualifiedVolvo service technician for repairs.
Automatic transmission:
Before attempting to tow the vehicle:
1. Switch off the ignition for at least10 minutes and disconnect the battery.
2. Follow the instructions for manuallyoverriding the shiftlock system on page112.
Please be aware that overriding the shiftlocksystem does not release the steering wheellock.
01 Safety
Supplemental Restraint System (SRS) 01
22
Front airbags
G01
8665
The front airbag system
The front airbags supplement the three-pointseat belts. For these airbags to provide theprotection intended, seat belts must be wornat all times.
The front airbag system includes gas genera-tors surrounded by the airbags, and decelera-tion sensors that activate the gas generators,causing the airbags to be inflated with nitrogengas.
Location of the passenger's side front airbag
As the movement of the seats' occupants com-presses the airbags, some of the gas is expel-led at a controlled rate to provide better cush-ioning. Both seat belt pretensioners alsodeploy, minimizing seat belt slack. The entireprocess, including inflation and deflation of theairbags, takes approximately one fifth of a sec-ond.
The location of the front airbags is indicated bySRS AIRBAG embossed on the steering wheelpad and above the glove compartment, and bydecals on both sun visors and on the front andfar right side of the dash.
The driver's side front airbag is folded andlocated in the steering wheel hub.
The passenger's side front airbag is foldedbehind a panel located above the glove com-partment.
WARNING
• The airbags in the vehicle are designedto be a SUPPLEMENT to–not a replace-ment for–the three-point seat belts. Formaximum protection, wear seat belts atall times. Be aware that no system canprevent all possible injuries that mayoccur in an accident.
• Never drive with your hands on thesteering wheel pad/airbag housing.
• The front airbags are designed to helpprevent serious injury. Deploymentoccurs very quickly and with consider-able force. During normal deploymentand depending on variables such asseating position, one may experienceabrasions, bruises, swellings, or otherinjuries as a result from deployment ofone or both of the airbags.
• When installing any accessory equip-ment, make sure that the front airbagsystem is not damaged. Any interfer-ence in the system could cause mal-function.
01 Safety
Supplemental Restraint System (SRS) 01
��
23
Front airbag deployment
• The front airbags are designed to deployduring certain frontal or front-angular col-lisions, impacts, or decelerations, depend-ing on the crash severity, angle, speed andobject impacted. The airbags may alsodeploy in certain non-frontal collisionswhere rapid deceleration occurs.
• The SRS sensors, which trigger the frontairbags, are designed to react to both theimpact of the collision and the inertialforces generated by it, and to determine ifthe intensity of the collision is sufficient forthe seat belt pretensioners and/or airbagsto be deployed.
However, not all frontal collisions activate thefront airbags.
• If the collision involves a nonrigid object(e.g., a snow drift or bush), or a rigid, fixedobject at a low speed, the front airbags willnot necessarily deploy.
• Front airbags do not normally deploy in aside impact collision, in a collision from therear or in a rollover situation.
• The amount of damage to the bodyworkdoes not reliably indicate if the airbagsshould have deployed or not.
WARNING
• Do not use child safety seats or childbooster cushions/backrests in the frontpassenger's seat. We also recommendthat occupants under 4 feet 7 inches(140 cm) in height who have outgrownthese devices sit in the rear seat with theseat belt fastened1.
• Never drive with the airbags deployed.The fact that they hang out can impairthe steering of your vehicle. Othersafety systems can also be damaged.
• The smoke and dust formed when theairbags are deployed can cause skinand eye irritation in the event of pro-longed exposure.
Should you have questions about any compo-nent in the SRS system, please contact atrained and qualified Volvo service technicianor Volvo customer support:
In the USA
Volvo Cars of North America, LLC
Customer Care Center
1 Volvo Drive
P.O. Box 914
Rockleigh, New Jersey 07647
1-800-458-1552
www.volvocars.us
In Canada
Volvo Cars of Canada Corp.
National Customer Service
175 Gordon Baker Road
North York, Ontario M2H 2N7
1-800-663-8255
www.volvocanada.com
1 See also the Occupant Weight Sensor information see page 26.
01 Safety
Supplemental Restraint System (SRS) 01
24
NOTE
• Deployment of front airbags occurs onlyone time during an accident. In a colli-sion where deployment occurs, the air-bags and seat belt pretensioners acti-vate. Some noise occurs and a smallamount of powder is released. Therelease of the powder may appear assmoke-like matter. This is a normalcharacteristic and does not indicate fire.
• Volvo's front airbags use special sen-sors that are integrated with the frontseat buckles. The point at which the air-bag deploys is determined by whetheror not the seat belt is being used, as wellas the severity of the collision.
• Collisions can occur where only one ofthe airbags deploys. If the impact is lesssevere, but severe enough to present aclear injury risk, the airbags are trig-gered at partial capacity. If the impact ismore severe, the airbags are triggeredat full capacity.
Airbag decals
G00
8335
Airbag decal on the outside of both sun visors
Passenger's side airbag decal
WARNING
• Children must never be allowed in thefront passenger's seat.
• Occupants in the front passenger's seatmust never sit on the edge of the seat,sit leaning toward the instrument panelor otherwise sit out of position.
• The occupant's back must be as uprightas comfort allows and be against theseat back with the seat belt properlyfastened.
• Feet must be on the floor, e.g., not onthe dash, seat or out of the window.
01 Safety
Supplemental Restraint System (SRS) 01
25
WARNING
• No objects or accessory equipment,e.g. dashboard covers, may be placedon, attached to, or installed near the airbag hatch (the area above the glovecompartment) or the area affected byairbag deployment (see the illustrationon page 22).
• There should be no loose articles, suchas coffee cups on the floor, seat, ordashboard area.
• Never try to open the airbag cover onthe steering wheel or the passenger'sside dashboard. This should only bedone by a trained and qualified Volvoservice technician.
• Failure to follow these instructions canresult in injury to the vehicle occupants.
01 Safety
Occupant Weight Sensor 01
26
General information
2
2
G01
7724
Occupant Weight Sensor (OWS) indicator light
Disabling the passenger's side front
airbag
Volvo recommends that ALL occupants (adultsand children) shorter than 4 feet 7 inches(140 cm) be seated in the back seat of anyvehicle with a front passenger side airbag, andbe properly restrained for their size and weight.For child safety recommendations, seepage 37.
The Occupant Weight Sensor (OWS) isdesigned to meet the regulatory requirementsof Federal Motor Vehicle Safety Standard(FMVSS) 208 and is designed to disable (willnot inflate) the passenger's side front airbagunder certain conditions.
The OWS works with sensors that are part ofthe front passenger's seat and seat belt. Thesensors are designed to detect the presence ofa properly seated occupant and determine ifthe passenger's side front airbag should beenabled (may inflate) or disabled (will notinflate).
The OWS will disable (will not inflate) the pas-senger's side front airbag when:
• the front passenger's seat is unoccupied,or has small/medium objects in the frontseat,
• the system determines that an infant ispresent in a rear-facing infant seat that isinstalled according to the manufacturer'sinstructions,
• the system determines that a small child ispresent in a forward-facing child restraintthat is installed according to the manufac-turer's instructions,
• the system determines that a small child ispresent in a booster seat,
• a front passenger takes his/her weight offof the seat for a period of time,
• a child or a small person occupies the frontpassenger's seat.
The OWS uses a PASSENGER AIRBAG OFFindicator lamp which will illuminate and stay onto remind you that the passenger's side front
airbag is disabled. The PASSENGER AIRBAGOFF indicator lamp is located in the overheadconsole, near the base of the rearview mirror.
NOTE
When the ignition is switched on, the OWSindicator light will go on for up to 10 secondswhile the system performs a self-diagnostictest.
However, if a fault is detected in the system:
• The OWS indicator light will stay on
• The SRS warning light (see page 21) willcome on and stay on
• The message Pass. Airbag OFF Service
urgent will be displayed in the informationdisplay.
WARNING
If a fault in the system is detected and indi-cated as described, be aware that the pas-senger's side front airbag will not deploy inthe event of a collision. In this case, the SRSsystem and Occupant Weight Sensorshould be inspected by a trained and quali-fied Volvo service technician as soon aspossible.
01 Safety
Occupant Weight Sensor 01
��
27
WARNING
• Never try to open, remove, or repair anycomponents in the OWS system. Thiscould result in system malfunction.Maintenance or repairs should only becarried out by an a trained and qualifiedVolvo service technician.
• The front passenger's seat should notbe modified in any way. This couldreduce pressure on the seat cushion,which might interfere with the OWS sys-tem's function.
Passeng-er's seatoccu-pancy sta-tus
OWS indi-cator lightstatus
Passeng-er's sidefront air-bag status
Seat unoc-cupied
OWS indica-tor lightlights up.
Passenger'sside frontairbag disa-bled
Seat occu-pied by lowweightoccupant/objectA
OWS indica-tor lightlights up
Passenger'sside frontairbag disa-bled
Seat occu-pied byheavy occu-pant/object
OWS indica-tor light isnot lit
Passenger'sside frontairbag ena-bled
A Volvo recommends that children always be properlyrestrained in appropriate child restraints in the rear seats. Donot assume that the passenger's side front airbag is disabledunless the PASSENGER AIRBAG OFF indicator lamp is lit.Make sure the child restraint is properly installed. If there isany doubt as to the status of the passenger's side front air-bag, move the child restraint to the rear seat.
The OWS is designed to enable (may inflate)the passenger's side front airbag in the eventof a collision anytime the system senses that aperson of adult size is sitting properly in thefront passenger's seat. The PASSENGER AIR-
BAG OFF indicator lamp will be off and remainoff.
If a person of adult size is sitting in the frontpassenger's seat, but the PASSENGER AIR-BAG OFF indicator lamp is on, it is possible thatthe person isn't sitting properly in the seat. Ifthis happens:
• Turn the vehicle off and ask the person toplace the seatback in an upright position.
• Have the person sit upright in the seat,centered on the seat cushion, with the per-son's legs comfortably extended.
• Restart the vehicle and have the personremain in this position for about twominutes. This will allow the system todetect that person and enable the pas-senger's frontal airbag.
• If the PASSENGER AIRBAG OFF indicatorlamp remains on even after this, the personshould be advised to ride in the rear seat.
This condition reflects limitations of the OWSclassification capability. It does not indicateOWS malfunction.
Modifications
If you are considering modifying your vehicle inany way to accommodate a disability, forexample by altering or adapting the driver's orfront passenger's seat(s) and/or airbag sys-tems, please contact Volvo at:
01 Safety
Occupant Weight Sensor 01
28
In the USA
Volvo Cars of North America, LLC
Customer Care Center
1 Volvo Drive
P.O. Box 914
Rockleigh, New Jersey 07647
1-800-458-1552
In Canada
Volvo Cars of Canada Corp.
National Customer Service
175 Gordon Baker Road North York, OntarioM2H 2N7
1-800-663-8255
WARNING
• No objects that add to the total weighton the seat should be placed on thefront passenger's seat. If a child isseated in the front passenger's seatwith any additional weight, this extraweight could cause the OWS system toenable the airbag, which might cause itto deploy in the event of a collision,thereby injuring the child.
• The seat belt should never be wrappedaround an object on the front passeng-er's seat. This could interfere with theOWS system's function.
• The front passenger's seat belt shouldnever be used in a way that exerts morepressure on the passenger than normal.This could increase the pressure exer-ted on the weight sensor by a child, andcould result in the airbag being enabled,which might cause it to deploy in theevent of a collision, thereby injuring thechild.
WARNING
• Keep the following points in mind withrespect to the OWS system. Failure tofollow these instructions couldadversely affect the system's functionand result in serious injury to the occu-pant of the front passenger's seat:
• The full weight of the front seat passen-ger should always be on the seat cush-ion. The passenger should never lifthim/herself off the seat cushion usingthe armrest in the door or the centerconsole, by pressing the feet on thefloor, by sitting on the edge of the seatcushion, or by pressing against thebackrest in a way that reduces pressureon the seat cushion. This could causeOWS to disable the front, passenger'sside airbag.
01 Safety
Occupant Weight Sensor 01
29
WARNING
• Do not place any type of object on thefront passenger's seat in such a waythat jamming, pressing, or squeezingoccurs between the object and the frontseat, other than as a direct result of thecorrect use of the Automatic LockingRetractor/Emergency Locking Retrac-tor (ALR/ELR) seat belt (see page 37).
• No objects should be placed under thefront passenger's seat. This could inter-fere with the OWS system's function.
01 Safety
Side impact protection (SIPS) airbags 01
30
General information
G03
2949
Location of the side impact (SIPS) airbags (frontseats only)
As an enhancement to the structural sideimpact protection built into your vehicle, it isalso equipped with Side Impact ProtectionSystem (SIPS) airbags.
The SIPS airbag system is designed to helpincrease occupant protection in the event ofcertain side impact collisions. The SIPS air-bags are designed to deploy only during cer-tain side-impact collisions, depending on thecrash severity, angle, speed and point ofimpact.
G02
4377
Driver's side SIPS airbag
G02
4378
Passenger's side SIPS airbag
SIPS airbag deployment (one airbag) occursonly on the side of the vehicle affected by theimpact. The airbags are not designed to deployin all side impact situations.
NOTE
SIPS airbag deployment (one airbag) occursonly on the side of the vehicle affected bythe impact. The airbags are not designed todeploy in all side impact situations.
Components in the SIPS airbag system
This SIPS airbag system consists of a gas gen-erator, the side airbag modules built into theoutboard sides of both front seat backrests,and electronic sensors/wiring.
01 Safety
Side impact protection (SIPS) airbags 01
31
WARNING
• The SIPS airbag system is a supple-ment to the structural Side Impact Pro-tection System and the three-point seatbelt system. It is not designed to deployduring collisions from the front or rear ofthe vehicle or in rollover situations.
• The use of seat covers on the front seatsmay impede SIPS airbag deployment.
• No objects, accessory equipment orstickers may be placed on, attached toor installed near the SIPS airbag systemor in the area affected by SIPS airbagdeployment.
• Never try to open or repair any compo-nents of the SIPS airbag system. Thisshould be done only by a trained andqualified Volvo service technician.
• In order for the SIPS airbag to provideits best protection, both front seatoccupants should sit in an upright posi-tion with the seat belt properly fastened.
• Failure to follow these instructions canresult in injury to the occupants of thevehicle in the event of an accident.
01 Safety
Inflatable Curtain (IC) 01
32
General information
This system consists of inflatable curtainslocated along the sides of the roof liners,stretching from the center of both front sidewindows to the rear edge of the rear side doorwindows. It is designed to help protect theheads of the occupants of the front seats andthe occupant of the outboard rear seating posi-tions in certain side impact collisions.
In certain side impacts, both the Inflatable Cur-tain (IC) and the Side Impact Airbag System(SIPS airbag) will deploy. The IC and the SIPSairbag deploy simultaneously.
NOTE
If the inflatable curtain deploys, it remainsinflated for approximately 3 seconds.
WARNING
• The IC system is a supplement to theSide Impact Protection System. It is notdesigned to deploy during collisionsfrom the front or rear of the vehicle or inrollover situations.
• Never try to open or repair any compo-nents of the IC system. This should bedone only by a trained and qualifiedVolvo service technician.
• Never hang heavy items from the ceilinghandles. This could impede deploymentof the Inflatable Curtain.
• The cargo area and rear seat should notbe loaded to a level higher than 2 in.(5 cm) below the upper edge of the rearside windows. Objects placed higherthan this level could impede the func-tion of the Inflatable Curtain.
WARNING
In order for the IC to provide its best pro-tection, both front seat occupants and bothoutboard rear seat occupants should sit inan upright position with the seat belt prop-erly fastened; adults using the seat belt andchildren using the proper child restraint sys-tem. Only adults should sit in the front seats.Children must never be allowed in the frontpassenger seat, see page 37 for guide-lines. Failure to follow these instructions canresult in injury to the vehicle occupants in anaccident.
01 Safety
Whiplash Protection System – WHIPS 01
��
33
General information
G02
1018
Whiplash Protection System (WHIPS) –
front seats only
The WHIPS system consists of speciallydesigned hinges and brackets on the front seatbackrests designed to help absorb some of theenergy generated in a collision from the rear(when the vehicle is rear-ended).
In the event of a collision of this type, the hingesand brackets of the front seat backrests aredesigned to change position slightly to allowthe backrest/head restraint to help support theoccupant's head before moving slightly rear-ward. This movement helps absorb some ofthe forces that could result in whiplash.
WARNING
• The WHIPS system is designed to sup-plement the other safety systems inyour vehicle. For this system to functionproperly, the three-point seat belt mustbe worn. Please be aware that no sys-tem can prevent all possible injuries thatmay occur in an accident.
• The WHIPS system is designed to func-tion in certain collisions from the rear,depending on the crash severity, angleand speed.
WARNING
• Occupants in the front seats must neversit out of position. The occupant's backmust be as upright as comfort allowsand be against the seat back with theseat belt properly fastened.
• If your vehicle has been involved in arear-end collision, the front seat backr-ests must be inspected by a trained andqualified Volvo service technician, evenif the seats appear to be undamaged.Certain components in the WHIPS sys-tem may need to be replaced.
• Do not attempt to service any compo-nent in the WHIPS system yourself.
G02
1842
01 Safety
Whiplash Protection System – WHIPS 01
34
WARNING
• Boxes, suitcases, etc. wedged behindthe front seats could impede the func-tion of the WHIPS system.
• If the rear seat backrests are foldeddown, cargo must be secured to pre-vent it from sliding forward against thefront seat backrests in the event of acollision from the rear. This could inter-fere with the action of the WHIPS sys-tem.
G01
8567
WARNING
Any contact between the front seat backr-ests and the folded rear seat or a rear-facingchild seat could impede the function of theWHIPS system. If the rear seat is foldeddown, the occupied front seats must beadjusted forward so that they do not touchthe folded rear seat.
01 Safety
Crash mode 01
35
G02
2831
Driving after a collision
If the vehicle has been involved in a collision,the text Safety mode See manual mayappear in the information display. This indi-cates that the vehicle's functionality has beenreduced.
NOTE
This text can only be shown if the display isundamaged and the vehicle's electrical sys-tem is intact.
Safety mode is a feature that is triggered if oneor more of the safety systems (e.g. front or sideairbags, an inflatable curtain, or one or more ofthe seat belt pretensioners) has deployed. Thecollision may have damaged an important
function in the vehicle, such as the fuel lines,sensors for one of the safety systems, thebrake system, etc.
WARNING
• Never attempt to repair the vehicleyourself or to reset the electrical systemafter the vehicle has displayed Safety
mode See manual. This could result ininjury or improper system function.
• Restoring the vehicle to normal operat-ing status should only be done by atrained and qualified Volvo service tech-nician.
• After Safety mode See manual hasbeen displayed, if you detect the odorof fuel vapor, or see any signs of fuelleakage, do not attempt to start thevehicle. Leave the vehicle immediately.
Attempting to start the vehicle
If damage to the vehicle is minor and there isno fuel leakage, you may attempt to start thevehicle. To do so:
1. Remove the remote control from the igni-tion slot.
2. Reinsert the remote in the ignition slot. Thevehicle will then attempt to reset Safetymode to normal status.
3. Try to start the vehicle.
Moving the vehicle
If the electrical system is able to reset systemstatus to normal (Safety mode See manual
will no longer be shown in the display), thevehicle may be moved carefully from its pres-ent position, if for example, it is blocking traffic.It should, however, not be moved farther thanis absolutely necessary.
WARNING
Even if the vehicle appears to be drivableafter Safety mode has been set, it shouldnot be driven or towed (pulled by anothervehicle). There may be concealed damagethat could make it difficult or impossible tocontrol. The vehicle should be transportedon a flatbed tow truck to a trained and quali-fied Volvo service technician for inspection/repairs.
01 Safety
Child safety 01
36
Children should be seated safely
Volvo recommends the proper use of restraintsystems for all occupants including children.Remember that, regardless of age and size, achild should always be properly restrained in avehicle.
Your vehicle is also equipped with ISOFIX/LATCH attachments, which make it more con-venient to install child seats.
Some restraint systems for children aredesigned to be secured in the vehicle by lapbelts or the lap portion of a lap-shoulder belt.Such child restraint systems can help protectchildren in vehicles in the event of an accidentonly if they are used properly. However, chil-dren could be endangered in a crash if the childrestraints are not properly secured in the vehi-cle. Failure to follow the installation instructionsfor your child restraint can result in your childstriking the vehicle's interior in a sudden stop.
Holding a child in your arms is NOT a suitablesubstitute for a child restraint system. In anaccident, a child held in a person's arms canbe crushed between the vehicle's interior andan unrestrained person. The child could also beinjured by striking the interior, or by being ejec-ted from the vehicle during a sudden maneuveror impact. The same can also happen if theinfant or child rides unrestrained on the seat.Other occupants should also be properly
restrained to help reduce the chance of injuringor increasing the injury of a child.
All states and provinces have legislation gov-erning how and where children should be car-ried in a vehicle. Find out the regulations exist-ing in your state or province. Recent accidentstatistics have shown that children are safer inrear seating positions than front seating posi-tions when properly restrained. A child restraintsystem can help protect a child in a vehicle.Here's what to look for when selecting a childrestraint system:
It should have a label certifying that it meetsapplicable Federal Motor Vehicle SafetyStandards (FMVSS 213) – or in Canada,CMVSS 213.
Make sure the child restraint system isapproved for the child's height, weight anddevelopment – the label required by the stand-ard or regulation, or instructions for infantrestraints, typically provide this information.
In using any child restraint system, we urge youto carefully look over the instructions that areprovided with the restraint. Be sure you under-stand them and can use the device properlyand safely in this vehicle. A misused childrestraint system can result in increased injuriesfor both the infant or child and other occupantsin the vehicle.
When a child has outgrown the child safetyseat, you should use the rear seat with thestandard seat belt fastened. The best way tohelp protect the child here is to place the childon a cushion so that the seat belt is properlylocated on the hips (see the illustration on page44). Legislation in your state or province maymandate the use of a child seat or cushion incombination with the seat belt, depending onthe child's age and/or size. Please check localregulations.
A specially designed and tested booster cush-ion and backrest can be obtained from yourVolvo retailer.
USA: for children weighing 33 – 80 lbs.(15 – 36 kg) and 38 – 54 inches (97 – 137 cm)in height
Canada: for children weighing 40 – 80 lbs.(18 – 36 kg) and 40 – 54 inches (102 – 137 cm)in height
01 Safety
Child safety 01
37
WARNING
• Do not use child safety seats or childbooster cushions/backrests in the frontpassenger's seat. We also recommendthat children under 4 feet 7 inches(140 cm) in height who have outgrownthese devices sit in the rear seat with theseat belt fastened.
• On hot days, the temperature in thevehicle interior can rise very quickly.Exposure to these high temperaturesfor even a short period of time cancause heat-related injury or death.Small children are particularly at risk.
Automatic Locking Retractor/Emergency Locking Retractor (ALR/ELR)
To make child seat installation easier, eachseat belt (except for the driver's belt) is equip-ped with a locking mechanism to help keep theseat belt taut.
When attaching the seat belt to a child
seat:
1. Attach the seat belt to the child seataccording to the child seat manufacturer'sinstructions.
2. Pull the seat belt out as far as possible.
3. Insert the seat belt latch plate into thebuckle (lock) in the usual way.
4. Release the seat belt and pull it taut aroundthe child seat.
A sound from the seat belt retractor will beaudible at this time and is normal. The belt willnow be locked in place. This function is auto-matically disabled when the seat belt isunlocked and the belt is fully retracted.
Volvo's recommendations
Why does Volvo believe that no child should sitin the front seat of a vehicle? It's quite simplereally. A front airbag is a very powerful devicedesigned, by law, to help protect an adult.
Because of the size of the airbag and its speedof inflation, a child should never be placed inthe front seat, even if he or she is properly bel-ted or strapped into a child safety seat. Volvohas been an innovator in safety for over sev-enty-five years, and we'll continue to do ourpart. But we need your help. Please rememberto put your children in the back seat, andbuckle them up.
Volvo has some very specific
recommendations:
• Always wear your seat belt.
• Airbags are a SUPPLEMENTAL safetydevice which, when used with a three-point seat belt can help reduce serious
injuries during certain types of accidents.Volvo recommends that you do not dis-connect the airbag system in your vehicle.
• Volvo strongly recommends that everyonein the vehicle be properly restrained.
• Volvo recommends that ALL occupants(adults and children) shorter than 4 feet7 inches (140 cm) be seated in the backseat of any vehicle with a front passengerside airbag.
Drive safely!
01 Safety
Child restraint systems 01
38
Child restraints
G02
2840
Infant seat
There are three main types of child restraintsystems: infant seats, convertible seats, andbooster cushions. They are classified accord-ing to the child's age and size.
The following section provides general infor-
mation on securing a child restraint using athree-point seat belt. Refer to page 45–46for information on securing a child restraintusing ISOFIX/LATCH lower anchors and/or toptether anchorages.
G02
2847
Convertible seat
WARNING
A child seat should never be used in thefront passenger seat of any vehicle with afront passenger airbag – not even if the"Passenger airbag off" symbol near therear-view mirror is illuminated (on vehiclesequipped with Occupant Weight Sensor). Ifthe severity of an accident were to cause theairbag to inflate, this could lead to seriousinjury or death to a child seated in this posi-tion.
G02
3269
Booster cushion
WARNING
Always refer to the child restraint manufac-turer's instructions for detailed informationon securing the restraint.
01 Safety
Child restraint systems 01
39
WARNING
• When not in use, keep the child restraintsystem secured or remove it from thepassenger compartment to help pre-vent it from injuring passengers in theevent of a sudden stop or collision.
• A small child's head represents a con-siderable part of its total weight and itsneck is still very weak. Volvo recom-mends that children up to age 4 travel,properly restrained, facing rearward. Inaddition, Volvo recommends that chil-dren should ride rearward facing, prop-erly restrained, as long as possible.
01 Safety
Infant seats 01
40
Securing an infant seat with a seat belt
G02
2844
Do not place the infant seat in the front passeng-er's seat
NOTE
Refer to page 45–46 for information onsecuring a child restraint using ISOFIX/LATCH lower anchors and/or top tetheranchorages.
1. Place the infant seat in the rear seat of thevehicle.
2. Attach the seat belt to the infant seataccording to the manufacturer's instruc-tions.
G02
3270
Positioning the seat belt through the infant seat
WARNING
• An infant seat must be in the rear-facingposition only.
• The infant seat should not be positionedbehind the driver's seat unless there isadequate space for safe installation.
WARNING
A child seat should never be used in thefront passenger seat of any vehicle with afront passenger airbag – not even if the"Passenger airbag off" symbol near therear-view mirror is illuminated (on vehiclesequipped with Occupant Weight Sensor). Ifthe severity of an accident were to cause theairbag to inflate, this could lead to seriousinjury or death to a child seated in this posi-tion.
3. Fasten the seat belt by inserting the latchplate into the buckle (lock) until a distinctclick is audible.
G02
3271
Fasten the seat belt
01 Safety
Infant seats 01
41
G02
2846
Pull out the shoulder section of the seat belt
4. Pull the shoulder section of the seat beltout as far as possible to activate the belt'sautomatic locking function.
NOTE
The locking retractor will automaticallyrelease when the seat belt is unbuckled andallowed to retract fully.
5. Press the infant seat firmly in place, let theseat belt retract and pull it taut. A soundfrom the seat belt retractor's automaticlocking function will be audible at this timeand is normal. The seat belt should now belocked in place.
G02
2850
Ensure that the seat is securely in place
6. Push and pull the infant seat along the seatbelt path to ensure that it is held securelyin place by the seat belt.
WARNING
It should not be possible to move the childrestraint (child seat) more than 1 in. (2.5 cm)in any direction along the seat belt path.
The infant seat can be removed by unbucklingthe seat belt and letting it retract completely.
01 Safety
Convertible seats 01
42
Securing a convertible seat with a seatbelt
G01
8630
Do not place the convertible seat in the front pas-senger's seat
NOTE
Refer to pages 45 and 46 for informationon securing a child restraint using ISOFIX/LATCH lower anchors and/or top tetheranchorages.
Convertible seats can be used in either a for-ward or rearward-facing position, dependingon the age and size of the child.
G02
2847
Route the seat belt through the convertible seat
WARNING
Always use a convertible seat that is suita-ble for the child's age and size. See the con-vertible seat manufacturer's recommenda-tions.
1. Place the convertible seat in the rear seatof the vehicle.
WARNING
• A small child's head represents a con-siderable part of its total weight and itsneck is still very weak. Volvo recom-mends that children up to age 4 travel,properly restrained, facing rearward. Inaddition, Volvo recommends that chil-dren should ride rearward facing, prop-erly restrained, as long as possible.
• Convertible child seats should be instal-led in the rear seat only.
• A rear-facing convertible seat should notbe positioned behind the driver's seatunless there is adequate space for safeinstallation.
2. Attach the seat belt to the convertible seataccording to the manufacturer's instruc-tions.
01 Safety
Convertible seats 01
43
G02
2848
Fasten the seat belt
3. Fasten the seat belt by inserting the latchplate into the buckle (lock) until a distinctclick is audible.
4. Pull the shoulder section of the seat beltout as far as possible to activate the belt'sautomatic locking function.
NOTE
The locking retractor will automaticallyrelease when the seat belt is unbuckled andallowed to retract fully.
5. Press the convertible seat firmly in place,let the seat belt retract and pull it taut. Asound from the seat belt retractor's auto-matic locking function will be audible at this
time and is normal. The seat belt shouldnow be locked in place.
G02
2849
Pull out the shoulder section of the seat belt
6. Push and pull the convertible seat alongthe seat belt path to ensure that it is heldsecurely in place by the seat belt.
WARNING
It should not be possible to move the childrestraint (child seat) more than 1 in. (2.5 cm)in any direction along the seat belt path.
The convertible seat can be removed byunbuckling the seat belt and letting it retractcompletely.
G02
2850
Ensure that the seat is securely in place
WARNING
A child seat should never be used in thefront passenger seat of any vehicle with afront passenger airbag – not even if the"Passenger airbag off" symbol near therear-view mirror is illuminated. If the severityof an accident were to cause the airbag toinflate, this could lead to serious injury ordeath to a child seated in this position.
01 Safety
Booster cushions 01
44
Securing a booster cushion
G02
2851
Position the child correctly on the booster cushion
Booster cushions are recommended for chil-dren who have outgrown convertible seats.
1. Place the booster cushion in the rear seatof the vehicle.
2. With the child properly seated on thebooster cushion, attach the seat belt to oraround the cushion according to the man-ufacturer's instructions.
3. Fasten the seat belt by inserting the latchplate into the buckle (lock) until a distinctclick is audible.
G02
2852
Positioning the seat belt
4. Ensure that the seat belt is pulled taut andfits snugly around the child.
WARNING
• The hip section of the three-point seatbelt must fit snugly across the child'ships, not across the stomach.
• The shoulder section of the three-pointseat belt should be positioned acrossthe chest and shoulder.
• The shoulder belt must never be placedbehind the child's back or under thearm.
01 Safety
ISOFIX/LATCH lower anchors 01
45
Using the ISOFIX/LATCH lower childseat anchors
Lower anchors for ISOFIX/LATCH-equippedchild seats are located in the rear, outboardseats, hidden below the backrest cushions.Symbols on the seat back upholstery mark theanchor positions as shown. To access theanchors, kneel on the seat cushion and locatethe anchors by feel. Always follow your childseat manufacturer's installation instructions,and use both ISOFIX/LATCH lower anchorsand top tethers whenever possible.
To access the anchors
1. Put the child restraint in position.
2. Kneel on the child restraint to press downthe seat cushion and locate the anchors byfeel.
3. Fasten the attachment on the childrestraint's lower straps to the ISOFIX/LATCH/LATCH lower anchors.
4. Firmly tension the lower child seat strapsaccording to the manufacturer's instruc-tions.
WARNING
Volvo's ISOFIX/LATCH anchors conform toFMVSS/CMVSS standards. Always refer tothe child restraint system's manual forweight and size ratings.
NOTE
• The rear seat's center position is notequipped with ISOFIX/LATCH loweranchors. When installing a childrestraint in this position, attach therestraint's top tether strap (if it is soequipped) to the top tether anchoragepoint and secure the restraint with thevehicle's center seat belt.
• Always follow your child seat manufac-turer's installation instructions, and useboth ISOFIX/LATCH lower anchors andtop tethers whenever possible.
G01
8631
Fasten the attachment correctly to the ISOFIX/LATCH lower anchors
WARNING
• Be sure to fasten the attachment cor-rectly to the anchor (see the illustration).If the attachment is not correctly fas-tened, the child restraint may not beproperly secured in the event of a colli-sion.
• The ISOFIX/LATCH lower child restraintanchors are only intended for use withchild seats positioned in the outboardseating positions. These anchors arenot certified for use with any childrestraint that is positioned in the centerseating position. When securing a childrestraint in the center seating position,use only the vehicle's center seat belt.
01 Safety
Top tether anchors 01
46
Child restraint anchorages
Your Volvo is equipped with child restraint toptether anchorages in the rear seat. They arelocated on the rear side of the backrests.
Securing a child seat
1. Place the child restraint on the rear seat.
2. Route the top tether strap under the headrestraint and attach it to the anchor.
3. Attach lower tether straps to the lower ISO-FIX/LATCH anchors. If the child restraint isnot equipped with lower tether straps, orthe restraint is used in the center seatingposition, follow instructions for securing achild restraint using the Automatic LockingRetractor seat belt (see page 37).
4. Firmly tension all straps.
Refer also to the child seat manufacturer'sinstructions for information on securing thechild seat.
NOTE
On models equipped with the optionalcargo area cover, this cover should beremoved before a child seat is attached tothe child restraint anchors.
WARNING
• Never route a top tether strap over thetop of the head restraint. The strapshould be routed beneath the headrestraint.
• Child restraint anchorages are designedto withstand only those loads imposedby correctly fitted child restraints. Underno circumstances are they to be usedfor adult seat belts or harnesses. Theanchorages are not able to withstandexcessive forces on them in the event ofcollision if full harness seat belts or adultseat belts are installed to them. An adultwho uses a belt anchored in a childrestraint anchorage runs a great risk ofsuffering severe injuries should a colli-sion occur.
• Do not install rear speakers that requirethe removal of the top tether anchors orinterfere with the proper use of the toptether strap.
01 Safety
Child restraint registration and recalls 01
47
Registering a child restraint
Child restraints could be recalled for safetyreasons. You must register your child restraintto be reached in a recall. To stay informedabout child safety seat recalls, be sure to fill outand return the registration card that comeswith new child restraints.
Child restraint recall information is readily avail-able in both the U.S. and Canada. For recallinformation in the U.S., call the U.S. Govern-ment's Auto Safety Hotline at 1-800-424-9393.In Canada, visit Transport Canada's ChildSafety website at http://www.tc.gc.ca/roadsafety/childsafety/menu.htm.
01 Safety
Integrated booster cushion 01
48 * Option/accessory, for more information, see Introduction.
Integrated two-stage booster
cushion*1
Volvo's optional integrated booster cushionsare located in the outboard seating positions.These booster cushions have been speciallydesigned to help safeguard children in the rearseat. They should be stowed (folded down intothe seat cushion) when not in use. When usingan integrated booster cushion, the child mustbe secured with the vehicle's three-point seatbelt.
Use these booster cushions only withchildren whose weight is between:• Stage 1: 48 – 80 lbs (22 – 36 kg)• Stage 2: 33 – 55 lbs (15 – 25 kg)and whose height is between:• Stage 1: 45 – 55 in. (115 – 140 cm)• Stage 2: 37 – 47 in. (95 – 120 cm)In Canada, Transport Canada'sweight recommendation is 40 – 80 lbs(18 – 36 kg).The booster cushions are designed to raise thechild higher, so that the shoulder strap crossesover the child's collarbone, not over the child'sneck. If using a booster cushion does not result
in proper positioning of the shoulder strap,then the child should be placed in a properlysecured child restraint (see page 38). Theshoulder belt must never be placed behind thechild's back or under the arm.
G01
7875
Correct seating position: child's head is below thehead restraint and the shoulder belt is across thecollarbone
G01
7719
Incorrect seating position: the child's head isabove the head restraint and the shoulder belt isnot across the collarbone
Before driving, check that:
• The integrated two-stage booster cushionis set in the correct position for accordingto the child's height and weight (see thetable below) and is locked in position.
Stage 1 Stage 2
Weight 48 – 80 lbs
22 – 36 kg
33 – 55 lbs
15 – 25 kg
Height 45 – 55 in.
115 – 140 cm
37 – 47 in.
95 – 120 cm
1 Canada only: This cushion may be referred to as a built-in booster cushion.
01 Safety
Integrated booster cushion 01
��
49
• That the seat belt is properly positionedand is taut.
• The shoulder section of the seat belt isacross the child's collarbone, not over theneck.
• The lap section of the seat belt is acrossthe child's hips and not the abdomen.
Using an integrated booster cushion
Stage 1
G01
7697
Pull the handle (1) forward and upward (2)to release the booster cushion.
Press the booster cushion rearward to lockit in position.
Stage 2
G01
7784
With the booster cushion in the stage 1position, press the button (see the arrow inillustration 1).
Lift the front edge of the booster cushionand press it rearward toward the backrestto lock it in position.
01 Safety
Integrated booster cushion 01
50
Stowing the two-stage integrated
booster cushion
The booster cushion can be folded down com-pletely (stowed) from either the stage 1 or stage2 positions.
NOTE
The booster cushion cannot be moved fromthe stage 2 (upper) position to the stage 1(lower) position. It must first be folded downcompletely to the stowed position, and thenadjusted to stage 1.
Pull the handle forward to release thebooster cushion.
Press down on the center of the boostercushion to return it to the stowed position.
NOTE
The booster cushion must be in the stowedposition before the rear seat backrests arefolded down.
CAUTION
Be sure there are no loose objects under thebooster cushion before it is stowed.
WARNING
DEATH or SERIOUS INJURY canoccurFollow all instructions on thebooster cushion and in the vehi-cle's owner's manual.MAKE SURE THE BOOSTERCUSHION IS SECURELYLOCKED BEFORE THE CHILD ISSEATED.• Use this booster cushion only with chil-
dren whose height and weight arewithin the permitted limits shown in thetable (see page 48).
• In the event of a collision while the inte-grated booster cushion was occupied,the entire booster cushion and seat beltmust be replaced. The booster cushionshould also be replaced if it is badlyworn or damaged in any way. This workshould be performed by a trained andqualified Volvo service technician only.
01 Safety
Child safety locks 01
51
Child safety locks
G02
1077
Child safety locks – rear doors
The controls are located on the rear doorjambs. Use the remote control's key blade or ascrewdriver to adjust these controls.
The rear doors can only be opened fromthe outside when the slot is in the horizon-tal position.
The rear doors can be opened from theinside when the slot is in the vertical posi-tion.
52
Remote key and key blade..................................................................... 54Private locking ........................................................................................ 61Keyless drive........................................................................................... 62Locks....................................................................................................... 65Alarm....................................................................................................... 68
02 Locks and alarm
Remote key and key blade
02
54
Introduction
Two remote keys or optional Personal CarCommunicators (PCC) are provided with yourvehicle. They enable you to unlock the doorsand tailgate, and also function as ignition keysto start the vehicle or operate electrical com-ponents. The remote keys contain detachablemetal key blades for manually locking orunlocking the driver's door and the glove com-partment. Up to six remotes can be pro-grammed for use on the same vehicle.
The PCCs have enhanced functionality com-pared with the standard remote key.
NOTE
In the remainder of this chapter, all referen-ces to the remote key also pertain to thePCC unless otherwise stated.
WARNING
Never leave the remote key in the ignition ifchildren are to remain in the vehicle.
Detachable key blade
Loss of a remote key
If either of the remote keys is lost, the othershould be taken with the car to a Volvo retailer.
As an anti-theft measure, the code of the lostremote key must be erased from the system.
NOTE
Additional or duplicate remote control keyscan be obtained from any Authorized VolvoRetailer.
You can also obtain additional or duplicateremote control keys from certain independ-ent repair facilities and locksmiths that arequalified to make remote control keys. Eachkey must be programmed to work with yourvehicle.
California Only:
A list of independent repair facilities and/orlocksmiths known to Volvo that can cut andcode replacement keys can be found:
• on the Volvo website athttp://www.volvocars.com/us/keys
• by calling Volvo Customer Care at1-800-458-1552
The number of registered keys for the vehiclecan be found in the vehicle's menu under Car
settings Car key memory
Number of keys. See page 124 for a descrip-tion of the menu system.
USA-5WK49264
FCC ID:KR55WK49264 + Siemens VDO5WK49236
FCC ID:KR55WK49236, 5WK49266
FCC ID:KR55WK49266 + Siemens VDO5WK49233
FCC ID:KR55WK49233
This device complies with part 15 of the FCCrules and RSS-210. Operation is subject to thefollowing conditions: (1) This device may notcause harmful interference, and (2) this devicemust accept any interference received, includ-ing interference that may cause undesiredoperation.
Canada-5WK49264
IC:267T-5WK49264 + Siemens VDO5WK49236
IC:267T-5WK49236, 5WK49266
IC:267T-5WK49266 + Siemens VDO5WK49233
IC:267T-5WK49233
Operation is subject to the following condi-tions: (1) this device may not cause interfer-ence, and (2) this device must accept any inter-ference, including interference that may causeundesired operation of the device.
02 Locks and alarm
Remote key and key blade
02
��
55
Key memory: door mirrors and driver's
seat
The position of the side door mirrors and powerdriver's seat are stored in the remote keyswhen the vehicle is locked. The next time thedriver's door is unlocked with the same remotekey and the door is opened within 2 minutes,the power driver's seat and side door mirrorswill automatically move to the position that theywere in when the doors were most recentlylocked with the same remote key. See page82 for more information.
This feature can be activated or deactivated inthe vehicle's menu under Car settings
Car key memory Seat & mirror
positions. See page 124 for a description ofthe menu system.
See also page 62 for information regardingvehicles with the optional keyless drive.
Confirmation when locking/unlocking
the vehicle
When the vehicle is locked with a remote key,the turn signals will flash once to confirm thatthis has been completed correctly.
• Locking: turn signals flash once
• Unlocking: turn signals flash twice
When the vehicle is locked, confirmation willonly be given if all of the locks are locked afterthe doors have been closed.
NOTE
If you do not receive confirmation whenlocking the vehicle, check whether a door orthe tailgate is ajar, or if this feature has beenturned off in the menu.
Making a setting
This function can be activated or deactivatedunder Car settings Light settings
Lock confirmation light or Car settings
Light settings Unlock
confirmation light. See page 124 for adescription of the menu system.
Immobilizer (start inhibitor)
Each of the keys supplied with your vehiclecontains a coded transponder. The code in thekey is transmitted to an antenna in the ignitionslot where it is compared to the code stored inthe start inhibitor module. The vehicle will startonly with a properly coded key. If you misplacea key, take the other keys to a trained andqualified Volvo service technician for reprog-ramming as an anti-theft measure. The follow-ing messages (which may appear in the instru-
ment panel display) are related to the immobil-izer:
Message Meaning
Key error Reinsert
key
Remote key not rec-ognized during start.Try to start the vehi-cle again.
Car key not found PCC with keylessdrive only. Remotekey not recognizedduring start. Try tostart the vehicleagain.
If the problem con-tinues, insert theremote key into theignition slot and tryto start the vehicleagain.
Immobilizer Try
start again
Remote key faultduring start. Contactan authorized Volvoworkshop.
02 Locks and alarm
Remote key and key blade
02
56 * Option/accessory, for more information, see Introduction.
CAUTION
Never use force when inserting the remotekey in the ignition slot. The vehicle cannotbe started if the transponder is damaged.
USA–FCC ID: LTQWFS 125VO
This device complies with part 15 of the FCCrules. Operation is subject to the following con-dition: (1) This device may not cause harmfulinterference, and (2) this device must acceptany interference received, including interfer-ence that may cause undesired operation.
Canada–IC: 3659A-WFS125VO
Operation is subject to the following condi-tions: (1) this device may not cause interfer-ence, and (2) this device must accept any inter-ference, including interference that may causeundesired operation of the device.
See page 107 for information on starting thevehicle.
Replacing the battery in the remote key
The batteries should be replaced if:
• The information symbol illuminates andReplace car key battery is shown in thedisplay and/or
• if the locks do not react after severalattempts to unlock or lock the vehicle.
NOTE
The remote key's range is normally approx-imately 60 ft (20 m) from the vehicle.
See page 59 for information on replacing thebattery.
Common functions: Remote key/Personal Car Communicator (PCC)*
G02
1079
Personal Car Communicator (PCC)*
Lock
Unlock
Approach lighting
Tailgate unlock
Panic alarm
Buttons on the remote
Lock – Press the Lock button on theremote once to lock all doors and the tailgate.The turn signals will flash once to confirm lock-ing.
Unlock – Press the Unlock button on theremote once to unlock the driver's door.
After a short pause, press the Unlock button asecond time within 10 seconds to unlock theother doors and the tailgate.
This function can be changed so that all doorsunlock at the same time under Car settings
Lock settings Doors unlock. Seepage 124 for a description of the menu sys-tem.
Approach lighting – As you approach thevehicle, press the button on the remote key tolight the interior lighting, parking lights, licenseplate lighting and the lights in the door mir-rors*.
These lights will switch off automatically after30, 60 or 90 seconds. See page 124 for adescription of the menu system.
Unlock tailgate – Press the button twicewithin several seconds to disarm the alarmsystem and optional movement sensor (thealarm indicator light on the dashboard will goout), and unlock only the tailgate. Pressing this
02 Locks and alarm
Remote key and key blade
02
��
* Option/accessory, for more information, see Introduction. 57
button for several seconds also opens the tail-gate on models equipped with the optionalpower tailgate.
Unlock tailgate – Press the button twicewithin several seconds to disarm the alarmsystem and optional movement sensor (thealarm indicator light on the dashboard will goout), and unlock only the tailgate.
NOTE
As an added safety precaution, the parkinglights will come on automatically for a shortperiod when the tailgate has been opened.
After closing, the tailgate will not automaticallyrelock. Press Lock to relock it and rearm thealarm.
See also the section "Unlocking the tailgatefrom the passenger compartment.
Panic alarm – This button can be used toattract attention during emergency situations.
To activate the panic alarm, press and hold thisbutton for at least 3 seconds or press it twicewithin 3 seconds. The turn signals and horn willbe activated. The panic alarm will stop auto-matically after 2 minutes and 45 seconds.
To deactivate, wait approximately 5 secondsand press the button again.
The Panic alarm button will not unlock the vehi-cle.
Range
The remote key has a range of approximately60 ft. (20 m) from the vehicle.
NOTE
Buildings or other obstacles may interferewith the function of the remote key. Thevehicle can also be locked or unlocked withthe key blade, see page 58.
Unique functions—PCC*
G02
1080
Information button
Indicator lights
Pressing the information button provides cer-tain information about the vehicle with the helpof the indicator lights.
Using the information button
1. Press the information button .
2. All of the indicator lights will flash sequen-tially for approximately 7 seconds to indi-cate that the PCC is receiving informationfrom the vehicle. If any of the buttons arepressed during this 7-second period,transmission of information to the PCC willbe interrupted.
NOTE
If none of the indicator lights flash when theinformation button has been pressed sev-eral times from different places in relation tothe vehicle, contact an authorized Volvoservice technician.
The indicator lights (2) provide informationaccording to the illustration:
02 Locks and alarm
Remote key and key blade
02
58
Steady green light: the vehicle is correctlylocked.
Steady yellow light: the vehicle is notlocked.
Steady red light: the alarm has been trig-gered.
Both red lights flash alternatively: the alarmwas triggered less than 5 minutes ago.
Range
The PCC's lock and unlock functions have arange of approximately 60 ft. (20 m) from thevehicle.
NOTE
• The approach lighting, panic alarm, andthe functions controlled by the informa-tion button have a range of approxi-mately 300 ft (100 m) from the vehicle.
• Radio waves, buildings or other obsta-cles may interfere with the function ofthe PCC.
If the vehicle does not provide confirmationwhen a button has been pressed, try movingcloser and pressing the button again.
Outside of the PCC´s range
If the PCC is more than approximately 300 ft(100 m) from the vehicle when the informationbutton is pressed, no new information will bereceived. The PCC most recently used to lockor unlock the vehicle will show the vehicle'smost recently received status. The indicatorlights will not flash when the information buttonis pressed while the PCC is out of range.
If more than one PCC is used to lock/unlockthe vehicle, only the one used most recently willshow the correct locking status.
NOTE
If none of the indicator lights illuminate whenthe information button is pressed, this maybe because the most recent transmissionbetween the vehicle and the PCC was inter-rupted or impeded by buildings or otherobjects.
Keyless drive
Vehicles equipped with the optional PersonalCar Communicator have the keyless drivefunction, see page 62 for detailed informa-tion.
Detachable key blade
The key blade can be removed from the remotekey. When removed, the key blade can be usedto:
• Lock/unlock the driver's door if the remotekey is not functioning properly
• Lock/unlock the glove compartment (seepage 66)
02 Locks and alarm
Remote key and key blade
02
��
59
Removing the key blade
G02
1082
Slide the spring loaded catch to the side.
Pull the key blade straight out of the remotekey.
Reinserting the key blade in the remote
key
1. Hold the remote key with the slot for thekey blade up.
2. Carefully slide the key blade into its groove.
3. Gently press the key blade in the grooveuntil it clicks into place.
Unlocking the doors with the detached
key blade
Insert the key blade as far as possible in thedriver's door lock. Turn the key blade clock-
wise approximately one-quarter turn to unlockthe driver's door only.
NOTE
After unlocking the driver's door with thekey blade, opening the door will trigger thealarm.
To disable the alarm:
Insert the remote key in the ignition slot. Thisalso applies to vehicles equipped with theoptional keyless drive.
Replacing batteries in the remote key/PCC
The battery/batteries in the remote key/PCCshould be replaced if:
• The information symbol lights up and a textappears in the information display.
and/or
• the vehicle's locks repeatedly do not reactwhen a button on the remote key/PCC ispressed within approximately 60 ft (20 m)from the vehicle.
Battery type CR 2430, 3 V (one battery in theremote key, two batteries in the PCC)
02 Locks and alarm
Remote key and key blade
02
60
Opening the remote key/PCC
Slide the spring loaded catch to theside.
Pull the key blade straight out of theremote key.
Insert a small screwdriver in the holebehind the spring loaded catch and care-fully pry up the cover.
NOTE
Turn the remote key with the buttonsupward so that the batteries do not fall outwhen the cover is removed.
Replacing the batteries
CAUTION
When handling batteries, avoid touchingtheir contact surfaces as this could result inpoor battery function in the remote key.
Note the position of the battery's (+) or (–)sides.
Remote key (one battery)
1. Use a screwdriver to pry out the old bat-tery.
2. Insert a new one with the (+) side down-ward.
PCC (two batteries)
1. Use a screwdriver to pry out the old bat-teries.
2. Insert the first new battery with the (+) sideupward.
3. Insert the plastic spacer over the battery.Insert the second new battery on top of theplastic spacer, with the + side downward.
Re-assembling the remote key
1. Press the remote key's cover into place.
2. Hold the remote key with the slot for thekey blade up.
3. Carefully slide the key blade into its groove.
4. Gently press the key blade in the grooveuntil it clicks into place.
Old batteries should be properly recycled.
02 Locks and alarm
Private locking
02
61
Tailgate compartment
G01
7869
Normal locking/unlocking points
G01
7870
Locking/unlocking points with private locking acti-vated.
By utilizing the remote key with the key bladeremoved, the private locking feature enablesyou to block access to the glove compartment
and disconnect the tailgate from the centrallocking system for e.g., valet parking or whenthe vehicle is brought to the retailer for service.
With the private locking function activated:
• The vehicle's doors can be locked orunlocked with the remote
• The engine can be started
• The glove compartment cannot beunlocked
• The tailgate cannot be unlocked or openedwith the remote
• The rear floor hatch cannot be opened
NOTE
The floor hatch must be closed completelybefore the tailgate can be closed.
Activating the private locking function
G02
0508
Insert the key blade in the glove compart-ment lock.
Turn the key blade180 degrees clockwise.
Remove the key blade from the lock. Amessage will appear in the instrumentpanel display.
Deactivating the private locking function
Turn the key blade 180 degrees counterclock-wise in the glove compartment lock to deacti-vate private locking.
See page 66 for information on locking theglove compartment normally, without activat-ing the private locking function.
02 Locks and alarm
Keyless drive
02
62 * Option/accessory, for more information, see Introduction.
Keyless drive* (models with PersonalCar Communicator only)
Keyless locking and unlocking
Range of the keyless drive remote key–5 ft(1.5 meters)
This system makes it possible to unlock andlock the vehicle without having to press anybuttons on the Personal Car Communicators(PCC). It is only necessary to have a keylessdrive remote key in your possession to operatethe central locking system.
NOTE
The buttons on the keyless drive remote keycan also be used to lock and unlock thevehicle, see page 56 for more information.
Both of the PCCs provided with the vehiclehave the keyless function, and additional onescan be ordered. The system can accommo-date up to six PCCs.
The red rings in the illustration indicate the areaaround the vehicle that is within range of thekeyless drive antennas.
Unlocking the vehicle
• A keyless drive remote key must be on thesame side of the vehicle as the door to beopened, and be within 5 feet (1.5 meters)of the door's lock or the tailgate (see theshaded areas in the illustration).
• Pull a door handle to unlock and open thedoor or pull the tailgate opening control.
The number of doors that are unlocked at thesame time can be set in the vehicle's menusystem, under Car settings Lock
settings Keyless entry. See page 124for a description of the menu system.
NOTE
If the PCC does not function normally (weakbattery, etc.), the vehicle can be unlockedwith the detachable key blade, seepage 59.
Locking or unlocking the vehicle with the
key blade
Keyless drive keyhole cover
The driver's door on vehicles equipped withkeyless drive can be locked or unlocked withthe remote key's detachable key blade if nec-essary, see page 58 for information on remov-ing the key blade from the remote key. Toaccess the keyhole in the driver's door:
1. Press the key blade approx. 0.5 in. (1 cm)straight up in the hole on the underside ofthe keyhole cover.> The cover will come off due to the pres-
sure exerted when the key blade ispushed upward.
2. Insert the key blade as far as possible in thedriver's door lock. Turn the key blade to
02 Locks and alarm
Keyless drive
02
��
63
unlock the driver's door only. This will trig-ger the alarm. Press the remote key into theigniton slot to turn off the alarm.
3. Press the cover back into place after thedoor has been unlocked.
Locking the vehicle
Models with keyless drive have a button on theoutside door handles
The doors and the tailgate can be locked bypressing the lock button in any of the outsidedoor handles.
NOTE
On keyless drive vehicles, the gear selectormust be in the Park (P) position, all doorsand the tailgate must be closed and the igni-tion must be switched off before the vehiclecan be locked.
Keyless drive remote key and driver's
seat/door mirror memory
• When you leave the vehicle with a PCC inyour possession and lock any door, theposition of the driver's seat and door mir-rors will be stored in the seat's memory.
• The next time a door is opened by a personwith the same PCC in his/her possession,the driver's seat and door mirrors will auto-matically move to the position that theywere in when the door was most recentlylocked.
NOTE
If several people carrying PCCs approachthe vehicle at the same time, the driver'sseat and door mirrors will assume the posi-tions they were in for the person who opensthe driver's door.
See also page 82 for information on adjustingand storing the seat's position in the seat mem-ory.
Keyless drive information messages
If all of the PCCs are removed from the vehiclewhile the engine is running or if the ignition isin mode II (see page 79) and all of the doorsare closed, a message will appear in the instru-ment panel display and an audible signal willsound.
When at least one PCC has been returned tothe car, the message will be erased in the dis-play and the audible signal will stop when:
• A door has been opened and closed
• The PCC has been inserted in the ignitionslot
• The READ button (see page 126 for thelocation of this button) has been pressed.
CAUTION
• Keyless drive remote keys should neverbe left in the vehicle. In the event of abreak-in, a remote found in the vehiclecould make it possible to start theengine.
• Electromagnetic fields or metalobstructions can interfere with the key-less drive system. Avoid placing theremote key near cellular phones, metal-lic objects or e.g., in a metal briefcase.
USA – FCC ID:KR55WK48952, KR55WK48964
NOTE
This device complies with part 15 of the FCCRules. Operation is subject to the following twoconditions: (1) This device may not causeharmful interference, and (2) this device mustaccept interference received, including inter-ference that may cause undesired operation.
02 Locks and alarm
Keyless drive
02
64
CAUTION
Changes or modifications not expresslyapproved by the manufacturer could void theuser's authority to operate the equipment.
Siemens VDO
5WK48891
Tested To Comply With FCC Standards
For Automobile Use
Canada – IC:267T-5WK48952,267T-5WK48964, 267T-5WK48891
NOTE
This device complies with RSS -210 of IndustryCanada. Operation is subject to the followingtwo conditions: (1) This device may not causeharmful interference, and (2) this device mustaccept interference received, including inter-ference that may cause undesired operation.
CAUTION
Changes or modifications not expresslyapproved by the manufacturer could void theuser's authority to operate the equipment.
Location of the keyless drive antennas
G02
1179
The keyless drive system has a number ofantennas located at various points in the vehi-cle.
On the tailgate, near the wiper motor
Left rear door handle
Ceiling, above the center of the rear seat
Under the floor of the cargo area, near therear seat
Right rear door handle
Under the rear section of the center con-sole
Under the front section of the center con-sole.
WARNING
People with implanted pacemakers shouldnot allow the pacemaker to come closerthan 9 inches (22 cm) to any of the keylessdrive system's antennas. This is to help pre-vent interference between the pacemakerand the keyless drive system.
02 Locks and alarm
Locks
02
��
65
Locking and unlocking the vehicle
From outside the vehicle
The remote key locks all of the doors and thetailgate.
If the locks repeatedly do not react when theunlock button is pressed, it may be necessaryto replace the batteries in the remote, seepage 56. In this case the vehicle can beunlocked with the detachable key blade. Seepage 58 for information on removing the keyblade from the remote key.
The first press on the unlock button unlocks thedriver's door and a second press unlocks theother doors and the tailgate (see also page56).
NOTE
The vehicle cannot be locked if a door isopen.
From inside the vehicle (central locking
button)
Central locking button
The lock buttons on the door panel can be usedto lock or unlock all doors and the tailgate atthe same time. Press to lock and tounlock.
When leaving the vehicle, the doors can belocked by pressing with the driver's dooropen and then closing the door. This will lockall of the doors and the tailgate.
Unlocking
The vehicle can be unlocked from inside thevehicle in two ways:
• By pressing the unlock button ( ).
• The door can be unlocked by pulling thedoor handle once and opened by pullingthe handle again.
Locking
• Press the lock button ( ) after the frontdoors have been closed.
• Each door can be locked individually withthe lock button on the respective doors.The door must be closed first.
Automatic relocking
If the doors are unlocked, the locks will auto-matically reengage (re-lock) and the alarm willrearm after 2 minutes unless a door or the tail-gate has been opened.
Automatic locking
When the vehicle starts to move, the doors andtailgate can be locked automatically. This fea-ture can be turned on or off under Car settings
Lock settings Doors automatic
lock. See page 124 for a description of themenu system.
02 Locks and alarm
Locks
02
66
Glove compartment
G02
0548
The glove compartment can only be lockedand unlocked using the detachable key bladein the remote key. See page 58 for informationon removing the key blade from the remotekey.
Insert the key blade in the glove compart-ment lock.
Turn the key blade 90 degrees clockwise.
Remove the key blade from the lock.
Locking/unlocking the tailgate
Tailgate unlock button on the remote key
Unlocking the tailgate with the remote
key
� Press the tailgate unlock button on theremote key to unlock (but not open1) thetailgate. See also page 56.> The alarm indicator light on the dash-
board will go out to indicate that thealarm is not monitoring the entire vehi-cle. The accessory movement and incli-nation sensors will be automatically dis-connected.
NOTE
• If the doors are locked while the tailgateis open, the tailgate will remainunlocked until the vehicle is relocked bypressing the Lock button on the remotekey.
• On keyless drive vehicles, the gearselector must be in the Park (P) position,all doors and the tailgate must beclosed and the ignition must beswitched off before the vehicle can belocked.
Unlocking the tailgate from the
passenger compartment
G02
2853
1 This button also opens, but does not close, the tailgate on models equipped with the optional power tailgate (see page 211).
02 Locks and alarm
Locks
02
67
� Press the button on the lighting panel (1) tounlock (but not open1) the tailgate.
NOTE
The taillights will illuminate automatically fora short period when the tailgate has beenopened.
Locking the tailgate with the remote key
� Press the lock button ( ) on the remote.See also page 56.> The alarm indicator on the dashboard
will begin flashing to show that the alarmhas been armed.
1 This button also opens, but does not close, the tailgate on models equipped with the optional power tailgate (see page 211).
02 Locks and alarm
Alarm
02
68
The alarm system
The alarm is automatically armed whenever thevehicle is locked with the remote key oroptional Personal Car Communicator.
When armed, the alarm continuously monitorsa number of points on the vehicle. The follow-ing conditions will trigger the alarm:
• The hood is forced open.
• The tailgate is forced open.
• A door is forced open.
• The ignition slot is tampered with.
• An attempt is made to start the vehicle witha non-approved key (a key not coded tothe car's ignition).
• If there is movement in the passenger com-partment (if the vehicle is equipped withthe accessory movement sensor).
• The vehicle is lifted or towed (if the vehicleis equipped with the accessory inclinationsensor).
• The battery is disconnected (while thealarm is armed).
• The siren is disconnected when the alarmis disarmed.
A message will appear in the information dis-play if a fault should occur in the alarm system.Contact a trained and qualified Volvo servicetechnician.
NOTE
Do not attempt to repair any of the compo-nents in the alarm system yourself. Thiscould affect the insurance policy on thevehicle.
The alarm indicator light
The status of the alarm system is indicated bythe red indicator light on the dashboard (seeillustration):
• Indicator light off – the alarm is not armed
• The indicator light flashes at one-secondintervals – the alarm is armed
• The indicator light flashes rapidly beforethe remote key is inserted in the ignitionslot and the ignition is put in mode I—thealarm has been triggered.
Arming the alarm
� Press the Lock button on the remote key.One long flash of the turn signals will con-firm that the alarm is armed.
Alarm confirmation settings can be changedunder Car settings Lock settings
Keyless entry. See page 124 for a descrip-tion of the menu system.
USA FCC ID: MAYDA 5823(3)This device complies with part 15 of the FCCrules. Operation is subject to the following con-ditions: (1) This device may not cause harmfulinterference, and (2) this device must acceptany interference received, including interfer-ence that may cause undesired operation.
Canada IC: 4405A-DA 5823(3)Movement sensor DA5823 by Dynex Operationis subject to the following conditions: (1) thisdevice may not cause interference, and (2) thisdevice must accept any interference, includinginterference that may cause undesired opera-tion of the device.
02 Locks and alarm
Alarm
02
69
Disarming the alarm
� Press the Unlock button on the remote key.> Two short flashes from the car's direc-
tion indicators confirm that the alarmhas been deactivated and that all doorsare unlocked.
Turning off (stopping) the alarm
If the alarm is sounding, it can be stopped bypressing the Unlock button on the remote keyor by inserting the remote key in the ignitionslot. Two short flashes from the car's directionindicators confirm that the alarm has beenturned off.
Other alarm-related functions
Automatic re-arming
If the doors are unlocked, the locks will auto-matically reengage (re-lock) and the alarm willre-arm after 2 minutes unless a door or the tail-gate has been opened.
Audible/visual alarm signal
• An audible alarm signal is given by a bat-tery powered siren. The alarm cycle lastsfor 30 seconds.
• The visual alarm signal is given by flashingall turn signals for approximately 5 minutesor until the alarm is turned off.
Remote key not functioning
If the remote key is not functioning properly,the alarm can be turned off and the vehicle canbe started as follows:
1. Open the driver's door with the key blade.> This will trigger the alarm.
2. Insert the remote key into the ignition slot.This will turn off the alarm.
Reduced alarm function
Turning off the accessory alarm sensors
In certain situations it may be desirable to turnoff the accessory inclination and movementalarm sensors if, for example, you drive yourvehicle onto a ferry where the rocking of theboat could trigger the alarm or if a pet is left inthe vehicle with the doors locked.
The vehicle's menu system is used for turningoff these sensors (see page 124 for a descrip-tion of the menu system).
1. Go into the menu under Car settings.
2. Select Reduced guard See manual
(Press Enter to choose).
3. Two alternatives are now available:
• Activate once. If this alternative isselected, Reduced guard See
manual will appear in the instrumentpanel display and the accessory incli-nation and movement alarm sensors willbe deactivated when the vehicle islocked.
• Ask on exit. If this alternative isselected, the message Press ENTER
to reduce guard until engine is
started. Press EXIT to cancel. willappear in the center console displayeach time the engine is turned off andthe accessory inclination and move-ment alarm sensors will be deactivatedwhen the vehicle is locked.
4. Press ENTER and lock the vehicle.
The next time the engine is started, the alarmsystem will be reset and Full guard will appearin the instrument panel display. The accessoryinclination and movement alarm sensors will bereactivated.
In either of the alternatives, if you prefer not todeactivate the accessory inclination and move-ment alarm sensors, do not make a choice inthe menu or press EXIT and lock the vehicle.
70 * Option/accessory, for more information, see Introduction.
Instruments and controls........................................................................ 72Ignition modes........................................................................................ 79Seats....................................................................................................... 81Steering wheel........................................................................................ 87Lighting................................................................................................... 88Wipers and washers................................................................................ 94Power windows....................................................................................... 97Mirrors..................................................................................................... 99Compass*.............................................................................................. 101Power moonroof* ................................................................................. 102HomeLink® Wireless Control System*................................................. 104Starting the engine................................................................................ 107Transmission......................................................................................... 111Brakes................................................................................................... 114Parking brake........................................................................................ 116Hill Descent Control (HDC)*.................................................................. 119
03 Your driving environment
Instruments and controls
03
��
* Option/accessory, for more information, see Introduction. 73
Function Page
Menus and mes-sages, turn signals,high/low beams,trip computer
124, 91,88, 155
Cruise control 160
Horn, airbag 87, 22
Main instrumentpanel
73
Audio system/Blue-tooth hands-freecontrols
135, 149
Ignition slot 79
START/STOPENGINE button
79
Hazard warningflashers
90
Door handle –
Function Page
In-door control pan-els (power win-dows, mirrors,power child safetylocks, central lock-ing button)
97, 99,51, 65
Menu controls,audio and climatecontrol systems
124, 136,130
Center console but-tons
124
Gear selector 111
Controls for activechassis (Four-C) -certain models only
159
Wipers and washers 94, 95
Steering wheeladjustment
87
Parking brake 116
Hood opening con-trol
259
Function Page
Power seat* adjust-ment controls
81
Lighting panel, but-tons for openingfuel filler door andunlocking the tail-gate
88, 208,66
Information displays
Information displays in the instrument panel
The information displays (1) show informationon some of the vehicle's functions, such ascruise control, the trip computer and mes-sages. The information is shown with text andsymbols.
03 Your driving environment
Instruments and controls
03
74 * Option/accessory, for more information, see Introduction.
More detailed information can be found in thedescriptions of the functions that use the infor-mation displays.
Gauges
Gauges in the instrument panel
Speedometer
Fuel gauge. Please note that the fuel levelindicator in the gauge moves from right toleft as the amount of fuel in the tankdecreases. The arrow indicates the side ofthe vehicle that the fuel filler door is on. Seealso the section on refueling beginning onpage 206. See page 155 for more infor-mation on fuel level and consumption.
The tachometer shows engine speed inthousands of revolutions per minute (rpm).Do not drive continuously with the needle
in the red area of the gauge. The enginemanagement system will automaticallyprevent excessively high engines speeds.This will be noticeable as a pronouncedunevenness in engine speed.
Indicator, information, and warningsymbols
Indicator and warning symbols
Indicator and information symbols
Indicator and warning symbols
High beam and turn signal indicators
Function check
All indicator and warning symbols light up inignition mode II or when the engine is started.When the engine has started, all the symbols
should go out except the parking brake sym-bol, which only goes out when the brake is dis-engaged.
If the engine does not start or if the functioncheck is carried out in ignition mode II, all sym-bols go out after 5 seconds except the symbolfor faults in the vehicle's emissions system andthe symbol for low oil pressure.
Certain symbols may not have their functionsillustrated, depending on the vehicle's equip-ment.
Indicator and information symbols
Symbol Description
Fault in the Active BendingLight (ABL)*system
Malfunction indicator light
Anti-lock brake system (ABS)
Rear fog light on
Stability system
Tire pressure monitoring sen-sor (TPMS)
03 Your driving environment
Instruments and controls
03
��
* Option/accessory, for more information, see Introduction. 75
Symbol Description
Low fuel level
Information symbol, see textin information display
High beam indicator
Left turn signal indicator
Right turn signal indicator
Fault in the Active Bending Light
(ABL) system
This symbol will illuminate if the there is a faultin the ABL system. See page 89 for moreinformation about this system.
Malfunction Indicator Light
As you drive, a computer called On-BoardDiagnostics II (OBDII) monitors your vehicle'sengine, transmission, electrical and emissionsystems.
The malfunction indicator (CHECK ENGINE)light will illuminate if the computer senses acondition that potentially may need correcting.When this happens, please have your vehicle
checked by a trained and qualified Volvo serv-ice technician as soon as possible.
A malfunction indicator (CHECK ENGINE) lightmay have many causes. Sometimes, you maynot notice a change in your car's behavior.Even so, an uncorrected condition could hurtfuel economy, emission controls, and drivabil-ity. Extended driving without correcting thecause could even damage other componentsin your vehicle.
This light may illuminate if the fuel filler cap isnot closed tightly or if the engine was runningwhile the vehicle was refueled.
Canadian models are equipped with thissymbol.
Anti-lock Brake System (ABS)
warning light
If the warning light comes on, there may be amalfunction in the ABS system (the standardbraking system will still function). Check thesystem by:
1. Stopping in a safe place and switching offthe ignition.
2. Restart the engine.
3. If the warning light goes off, no furtheraction is required.
If the warning light remains on, the vehicleshould be driven to a trained and qualifiedVolvo service technician for inspection, seepage 114 for additional information.
Canadian models are equipped with thissymbol.
Rear fog light
This symbol indicates that the rear fog light(located in the driver's side tail light cluster) ison.
Stability system
This indicator symbol flashes when the DSTC(Dynamic Stability and Traction Control sys-tem) is actively working to stabilize the vehicle,see page 157 for more detailed information.
Tire pressure monitoring system
(TPMS)*
This symbol illuminates to indicate that tirepressure in one or more tires is low, seepage 250 for detailed information.
Low fuel level
When this light comes on, the vehicle shouldbe refueled as soon as possible. See page206 for information about fuel and refueling.
Information symbol
The information symbol lights up and a textmessage is displayed to provide the driver with
03 Your driving environment
Instruments and controls
03
76
necessary information about one of the vehi-cle's systems. The message can be erased andthe symbol can be turned off by pressing theREAD button (see page 126 for information) orthis will take place automatically after a shorttime (the length of time varies, depending onthe function affected).
The information symbol may also illuminatetogether with other symbols.
High beam indicator
This symbol illuminates when the high beamheadlights are on, or if the high beam flashfunction is used.
Left turn signal indicator
Right turn signal indicator
NOTE
• Both turn signal indicators will flashwhen the hazard warning flashers areused.
• If either of these indicators flash fasterthan normal, the direction indicators arenot functioning properly.
Indicator and warning symbols
Symbol Description
Low oil pressure
Parking brake applied
SRS airbags
Seat belt reminder
Generator not charging
Fault in the brake system
Warning symbol
Low oil pressure
If the light comes on while driving, stop thevehicle, stop the engine immediately, andcheck the engine oil level. If the oil level is nor-mal and the light stays on after restart, have thevehicle towed to the nearest trained and quali-fied Volvo service technician. This is normal,provided it goes off when the engine speed isincreased.
Parking brake applied
This symbol illuminates when the parkingbrake is applied. On models equipped with theelectric parking brake, this symbol flasheswhile the brake is being applied and then glowssteadily.
A flashing symbol means that a fault has beendetected. See the message in the informationdisplay.
Canadian models are equipped with thissymbol.
See page 116 for more information aboutusing the parking brake.
Airbags – SRS
If this light comes on while the vehicle is beingdriven, or remains on for longer than approxi-mately 10 seconds after the vehicle has beenstarted, the SRS system's diagnostic functionshave detected a fault in a seat belt lock or pre-tensioner, a front airbag, side impact airbag,and/or an inflatable curtain. Have the system(s)inspected by a trained and qualified Volvoservice technician as soon as possible.
See page 21 for more information about theairbag system.
03 Your driving environment
Instruments and controls
03
��
77
Seat belt reminder
This symbol comes on for approximately 6 sec-onds if the driver has not fastened his or herseat belt.
Generator not charging
This symbol comes on during driving if a faulthas occurred in the electrical system. Contactan authorized Volvo workshop.
Engine temperature
Engine overheating can result from low oil orcoolant levels, towing or hard driving at highheat and altitude, or mechanical malfunction.Engine overheating will be signaled with textand a red warning triangle in the middle of theinstrument display. The exact text will dependon the degree of overheating. It may range fromHigh engine temp Reduce speed to High
engine temp Stop engine. If appropriate,other messages, such as Coolant level low,
Stop safely will also be displayed. If yourengine does overheat so that you must stop theengine, always allow the engine to cool beforeattempting to check oil and coolant levels.
See page 262 for more information.
Fault in brake system
If this symbol lights, the brake fluid level maybe too low. Stop the vehicle in a safe place andcheck the level in the brake fluid reservoir, seepage 262. If the level in the reservoir is below
MIN, the vehicle should be transported to anauthorized Volvo workshop to have the brakesystem checked.
Canadian models are equipped with thissymbol.
If the and symbols come on at thesame time, there may be a fault in the brakeforce distribution system.
1. Stop the vehicle in a safe place and turn offthe engine.
2. Restart the engine.
• If both symbols extinguish, continue driv-ing.
• If the symbols remain on, check the level inthe brake fluid reservoir, see page 262. Ifthe brake fluid level is normal but the sym-bols are still lit, the vehicle can be driven,with great care, to an authorized Volvoworkshop to have the brake systemchecked.
• If the level in the reservoir is below MIN, thevehicle should be transported to an author-ized Volvo workshop to have the brakesystem checked.
WARNING
• If the fluid level is below the MIN markin the reservoir or if a warning messageis displayed in the text window: DO
NOT DRIVE. Have the vehicle towed toa trained and qualified Volvo servicetechnician and have the brake systeminspected.
• If the ABS and Brake system lights areon at the same time, there is a risk ofreduced vehicle stability.
Warning symbol
The red warning symbol lights up to indicate aproblem related to safety and/or drivability. Amessage will also appear in the main instru-ments panel's display. The symbol remainsvisible until the fault has been rectified but thetext message can be cleared with the READ
button, see page 126. The warning symbol canalso come on in conjunction with other sym-bols.
Action:
1. Stop in a safe place. Do not drive the vehi-cle further.
2. Read the information on the informationdisplay. Implement the action in accord-ance with the message in the display. Clearthe message using READ.
03 Your driving environment
Instruments and controls
03
78
Reminder – doors not closed
If one of the doors, the hood or tailgate is notclosed properly, the information or warningsymbol comes on together with an explanatorytext message in the instrument panel. Stop thevehicle in a safe place as soon as possible andclose the door, hood or tailgate.
If the vehicle is driven at a speedlower than approximately 5 mph
(7 km/h), the information symbol comes on.
If the vehicle is driven at a speedhigher than approximately 5 mph
(7 km/h), the warning symbol comes on.
Trip odometers
Trip odometers and reset button
Odometer display
Button for toggling between T1 and T2,and for resetting the odometer
The trip odometers are used to measure shortdistances. A short press the button togglesbetween the two trip odometers T1 and T2. Along press (more than 2 seconds) resets anactive trip odometer to zero. The distance isshown in the display.
Clock
Clock and setting control
Display
Control for setting the clock
Turn the control clockwise/counterclockwiseto set the time. The set time is shown in theinformation display.
The clock may be temporarily replaced by asymbol in conjunction with a message, seepage 126.
03 Your driving environment
Ignition modes
03
��
* Option/accessory, for more information, see Introduction. 79
Inserting and removing the remote key
Ignition slot with remote key and START/STOPENGINE button.
Inserting the remote key
Holding the end of the remote key with thebase of the key blade, insert the remote keyinto the ignition slot as shown in the illustration.
CAUTION
Foreign objects in the ignition slot canimpair function or damage the lock.
Removing the remote key
The remote key can be removed from the igni-tion slot by pressing the key in lightly. It willthen be ejected slightly and can be removedfrom the slot. The gear selector must be inposition P (Park).
Ignition modes
The various ignition modes are accessed withthe remote key in the ignition slot.
Posi-tion
Function
0 Odometer, clock and tempera-ture gauge are illuminated. Steer-ing lock is deactivated. The audiosystem can be used.
I Moonroof*, power windows,12-volt sockets, navigation system*,climate system blower, ECC,windshield wipers can be used.
II The headlights come on. Warn-ing/indicator lights come on for5 seconds. All equipment oper-ates apart from heated seats andrear window defroster, whichonly work when the engine is run-ning.
III The starter motor will operateuntil the engine has started.
NOTE
The brake pedal must not be depressedwhen accessing ignition modes I or II.
Ignition mode 0
� Insert the remote key in the ignition slot andpress it lightly. It will be drawn into the slot.
WARNING
The ignition key should always be fullyinserted in the ignition slot when the vehicleis being towed to help prevent the steeringwheel from locking.
On vehicles with the optional keyless drive,the remote key must be in the passengercompartment and the driver's door must beclosed.
Ignition mode I
� Press the remote key into the ignition slotand press START/STOP ENGINE briefly.
Ignition mode II
� Press the remote key into the ignition slotand press START/STOP ENGINE forapproximately 2 seconds.
Ignition mode III (engine start)
Start the engine, see page 107.
Stopping the engine
� Press START/STOP ENGINE. (If theengine is running and the vehicle is mov-ing, keep the button depressed until theengine stops).
03 Your driving environment
Ignition modes
03
80
Returning to ignition mode 0
� Press START/STOP ENGINE briefly toreturn to ignition mode 0 from modes I orII.
Emergency towing
If the vehicle is being towed, the steering wheelmust be unlocked and the remote key must bein the ignition slot1.
Ignition mode II should be used so that thelighting can be switched on.
1 On vehicles with the optional keyless drive, the remote key must be in the passenger compartment.
03 Your driving environment
Seats
03
��
* Option/accessory, for more information, see Introduction. 81
Front seats
Lumbar support: turn the control for firmeror softer lumbar support.
Front-rear adjustment: lift the bar andmove the seat to the position of yourchoice.
Raise/lower front edge of seat cushion,pump up/down.
Backrest tilt: turn the control to adjust theangle of the backrest.
Raise/lower the seat, pump up/down.
Control panel for power seat*.
WARNING
• Do not adjust the seat while driving. Theseat should be adjusted so that thebrake pedal can be depressed fully. Inaddition, position the seat as far rear-ward as comfort and control allow.
• Check that the seat is securely lockedinto position after adjusting.
Folding the front seat backrest
The front passenger seat backrest can befolded to a horizontal position to make room fora long load. Fold the backrest as follows:
Move the seat as far back and down aspossible.
Adjust the backrest to an upright position.
Lift the catches on the rear of the backrest.
Without releasing the catches, push thebackrest forward.
Move the seat as far forward as possibleso that the head restraint slides under theglove compartment.
WARNING
• When transporting long objects, coversharp edges on the load to help preventinjury to occupants. Secure the load tohelp prevent shifting during suddenstops.
• When the seat's backrest is returned tothe upright position, push and pull it tobe sure that it is securely locked in thisposition.
03 Your driving environment
Seats
03
82 * Option/accessory, for more information, see Introduction.
Power seat*
Front edge of seat cushion up/down
Seat forward/rearward and up/down
Backrest tilt
Operation
The seats can be adjusted for a short periodafter unlocking the door with the remote con-trol without the key in the ignition slot. Seatadjustment is normally made when the ignitionis on and can always be made when the engineis running.
NOTE
• Only one of the power seat's controlscan be used at the same time.
• The power seats have an overload pro-tector that activates if a seat is blockedby any object. If this occurs, switch offthe ignition (key in position 0) and waitfor a short period before operating theseat again.
Seat with memory function
Stored seat position
Stored seat position
Stored seat position
Memory button
Programming the memory
Three different seating and door mirror posi-tions can be stored in the driver seat's memory.
The following example explains how button (1)can be programmed. Buttons (2) and (3) areprogrammed in the same way.
To program (store) a seat position and doormirror position in button (1):
1. Move the seat (and door mirrors) to thedesired position using the seat and mirroradjustment controls.
2. Press and hold down the memory button(4).
3. With the memory button depressed, pressbutton (1) briefly to store the current posi-tion for the seat/mirrors.
To move the seat and mirrors to the position
that they were in when a button was pro-
grammed:
� Press and hold down button (1) until theseat and mirrors stop moving.
NOTE
As a safety precaution, the seat will stopautomatically if the button is released beforethe seat has reached the preset position.
03 Your driving environment
Seats
03
��
* Option/accessory, for more information, see Introduction. 83
Remote keyless entry system and the
driver's seat and door mirrors1
The remote control transmitter also controlsthe position of the power driver's seat and doormirrors in the following way:
1. Adjust the seat to your preferences.
2. When you leave your vehicle, lock it usingthe remote control.
The position of the driver's seat and door mir-rors is now stored in the remote control's mem-ory.
Automatic seat/mirror adjustment
To move the seat and door mirrors to the posi-tion in which you left them:
1. Unlock the driver's door with the sameremote control (the one used to lock thedoors).
2. Open the driver's door within 2 minutes.
The driver's seat and door mirrors will auto-matically move to the position in which you leftthem.
NOTE
• The key memory is independent of theseat memory.
• The seat will move to this position evenif someone else has moved it to a dif-ferent seating position and locked thevehicle with a different remote control.
• This feature will work in the same waywith all of the remote control transmit-ters that you use with your vehicle.
The function can be activated/deactivatedunder Car key memory Seat & mirror
positions. For a description of the menu sys-tem, see the information beginning on page124.
Emergency stop
If the seat accidentally begins to move, pressone of the buttons to stop the seat.
WARNING
• Because the driver's seat can beadjusted with the ignition off, childrenshould never be left unattended in thevehicle.
• Movement of the seat can be STOPPEDat any time by pressing any button onthe power seat control panel.
• Do not adjust the seat while driving. Theseat should be adjusted so that thebrake pedal can be depressed fully. Inaddition, position the seat as far rear-ward as comfort and control allow.
• The seat rails on the floor must not beobstructed in any way when the seat isin motion.
Heated/ventilated seats*
See page 130.
1 See page 63 for information regarding vehicles with the optional keyless drive.
03 Your driving environment
Seats
03
84
Rear seats
Rear center head restraint
The center head restraint should be adjustedaccording to the passenger's height. Therestraint should be carefully adjusted to sup-port the occupant's head.
• Pull the head restraint up as required.
• To lower, press and hold the button(located at the center, between the back-rest and the head restraint) while pressingthe head restrain down.
WARNING
The center rear seat head restraint shouldonly be in its lowest position when this seatis NOT occupied. When the center positionis occupied, the head restraint should becorrectly adjusted to the passenger’sheight. The upper edge of the head restraintshould be at least on a level with the upper-most point of the seat occupant's ear.
Manually folding down the rear seat's
outboard head restraints
• Pull the handle closest to the head restraintto fold it down.
• To return the head restraint to the uprightposition, push it up until it clicks into place.
NOTE
• The head restraint must be returned tothe upright position manually.
• The outboard head restraints cannot befolded down on models that are notequipped with this button.
03 Your driving environment
Seats
03
��
* Option/accessory, for more information, see Introduction. 85
CAUTION
The rear head restraints should not be keptfolded down for prolonged periods. Thiscould result in pressure marks in leatherupholstery.
WARNING
For safety reasons, no one should beallowed to sit in the outboard rear seat posi-tions if the head restraints are folded down.If these positions are occupied, the headrestraints should be in the upright (fixed)position.
Automatically folding down the rear
seat’s outboard head restraints*
1. The ignition must be in mode I or II.
2. Press the button to lower the rear headrestraints for improved visibility.
CAUTION
The rear head restraints should not be keptfolded down for prolonged periods. Thiscould result in pressure marks in leatherupholstery.
WARNING
For safety reasons, no one should beallowed to sit in the outboard rear seat posi-tions if the head restraints are folded down.If these positions are occupied, the headrestraints should be in the upright (fixed)position.
Folding down the rear seat backrests
The three sections of the rear seat backrest canbe folded down in different combinations tomake it easier to transport long objects.
• The left (driver's side) section can be foldeddown separately.
• The center section can be folded downseparately.
• The right (passenger's side) section canonly be folded down together with the cen-ter section.
• All three sections can be folded downtogether.
CAUTION
To help avoid damage to the upholstery,there should be no objects on the rear seatand the seat belt should not be buckledwhen the backrest is folded down.
G01
7903
Release and lower the center headrestraint (see page 84) if the center and/orright section of the backrest is to be low-ered. The outboard head restraints folddown automatically.
03 Your driving environment
Seats
03
86
Pull up the backrest release control on therespective section(s) and fold the sec-tion(s) down.
NOTE
It may be necessary to move the front seatsforward or put their backrests in a moreupright position before folding down therear seat backrests.
WARNING
• When one or more sections of the back-rest is returned to the upright position,check that it is properly locked in placeby pushing and pulling it. The red indi-cators should also not be visible.
• Return the outboard head restraints tothe upright position.
• Long loads should always be securelyanchored to help avoid injury in theevent of a sudden stop.
• Always turn the engine off and apply theparking brake when loading/unloadingthe vehicle.
• Place the transmission in the Park (P)position to help prevent inadvertentmovement of the gear selector.
• On hot days, the temperature in thevehicle interior can rise very quickly.Exposure of people to these high tem-peratures for even a short period of timecan cause heat-related injury or death.Small children are particularly at risk.
03 Your driving environment
Steering wheel
03
* Option/accessory, for more information, see Introduction. 87
Adjusting
G02
1138
Adjusting the steering wheel
Lever for releasing/locking the steeringwheel
Possible positions
The steering wheel can be adjusted for bothheight and reach:
1. Pull the lever toward you to release thesteering wheel.
2. Adjust the steering wheel to the positionthat suits you.
3. Push back the lever to lock the steeringwheel in place. If the lever is difficult topush into place, press the steering wheellightly at the same time as you push thelever.
WARNING
Never adjust the steering wheel while driv-ing.
With the optional speed-dependent powersteering the level of steering force can beadjusted, see page 159.
Keypads
Keypads in the steering wheel
Cruise control, see page 160. Adaptivecruise control*, see page 162.
Audio controls, see page 135.
Horn
Horn
� Press the steering wheel hub to sound thehorn.
03 Your driving environment
Lighting
03
88
Lighting panel
G02
2854
Overview, light switches
Thumb wheel for adjusting display andinstrument lighting
Rear fog light
Front fog lights
Headlights/parking lights
Instrument lighting
Illumination of the display and instrument lightswill vary, depending on ignition mode.
The display lighting is automatically subduedin darkness and the sensitivity is set with thethumb wheel.
The intensity of the instrument lighting isadjusted with the thumb wheel.
High/low beam headlights
21
G02
2855
Headlight switch and lever
High beam flash
Toggle between high and low beams
Daytime running lights/no highbeams
Parking lights
Low beams
High beam flash
Move the lever toward the steering wheel toposition 1. The high beams come on until thelever is released.
High/low beam headlights
Continuous high beams
1. Set the ignition to mode II.
2. With the light switch in position , pullthe turn signal lever toward the steeringwheel to position 2 to toggle between highand low beams (this also applies on mod-els equipped with the optional ActiveBending Lights).> The symbol illuminates in the
instrument panel to indicate that thehigh beams are on.
Low beams
When the engine is started, the low beams areactivated automatically (daytime running lights)if the headlight control is in position 0 or
.
Daytime running lights can be deactivated bya trained and qualified Volvo service techni-cian.
03 Your driving environment
Lighting
03
��
* Option/accessory, for more information, see Introduction. 89
NOTE
• The use of daytime running lights ismandatory in Canada.
• Continuous high beams cannot be acti-vated when the headlight switch is inposition or 0. High beam flash willfunction in these positions.
Active Bending Lights (ABL)*
Headlight pattern with the Active Bending Lightfunction deactivated (left) and activated (right)
When this function is activated, the headlightbeams adjust laterally to help light up a curveaccording to movements of the steering wheel(see the right-pointing beam in the illustration).
ABL is activated automatically when the engineis started and it can be deactivated/reactivated
in the menu system under Car settings
Light settings Active bending lights.
NOTE
This function is only active in twilight or darkconditions, and only when the vehicle is inmotion.
If a fault should occur in the system, the symbolwill illuminate and a message will be displayedas shown in the table.
Symbol Display Explana-tion
Headlamp
failure
Service
required
The systemis not func-tioningproperly andshould beinspected/repaired bya trainedand qualifiedVolvo serv-ice techni-cian.
Parking lights
G02
2907
Headlight control in position for parking lights
The front and rear parking lights can be turnedon even when the ignition is switched off.
Turn the headlight control to the center posi-tion (the license plate lighting comes on at thesame time).
The lighting also comes on when the tailgate isopened in order to alert anyone travelingbehind your vehicle.
03 Your driving environment
Lighting
03
90 * Option/accessory, for more information, see Introduction.
Front fog lights*
G01
4402
Button for front fog lights
The front fog lights can be switched ontogether with high/low beams or the parkinglights. However, the fog lights switch off andremain off while the high beams are on.
� Press the button to switch the fog lights on/off. The light in the button comes on whenthe fog lights are on.
NOTE
Regulations regarding the use of the frontfog lights may vary, depending on whereyou drive.
Rear fog light
G01
4403
Button for rear fog light
The single rear fog light is located in the driver'sside taillight cluster. The rear fog light will onlyfunction in combination with the high/lowbeam headlights or the optional front fog lights.
� Press the button to switch the rear fog lighton/off.> The rear fog light indicator symbol
on the instrument panel and thelight in the button come on when therear fog light is switched on.
NOTE
The rear fog light is considerably brighterthan the normal taillights and should beused only when conditions such as fog, rain,snow, smoke or dust reduce visibility forother vehicles to less than 500 ft.(150 meters).
Hazard warning flashers
Location of the hazard warning flasher button
The hazard warning flasher should be used toindicate that the vehicle has become a traffichazard.
� To activate the flashers, press the buttonin the center dash. Press the button againto turn off the flashers.
03 Your driving environment
Lighting
03
��
91
NOTE
• Regulations regarding the use of thehazard warning flasher may vary,depending on where you live.
• The hazard warning flashers will be acti-vated automatically if an airbagdeploys.
Turn signals
Turn signals
When changing lanes
The driver can automatically flash the turnsignals 3 times by moving the turn signal leverup or down to the first position and releasing it.
When turning
Move the lever as far up or down as possi-ble to start the turn signals. The turn signals willbe cancelled automatically by the movement ofthe steering wheel, or the lever can be returnedto its initial position by hand.
NOTE
• This automatic flashing sequence canbe interrupted by immediately movingthe lever in the opposite direction.
• If the turn signal indicator flashes fasterthan normal, check for a burned-outturn signal bulb.
Interior lighting, front
G02
1149
Light switches, front roof lighting
Drivers side front reading light, on/off
Passenger's side front reading light, on/off
Overhead courtesy lighting.
The lighting in the front part of the passengercompartment is controlled with the buttons (1)and (2) in the roof console.
Switch (3) has three positions for all passengercompartment lighting:
• Off: right side depressed, automatic light-ing off.
• Neutral position: automatic lighting is on.
• On – left side depressed, passenger com-partment lighting on.
03 Your driving environment
Lighting
03
92 * Option/accessory, for more information, see Introduction.
Interior lighting, rear
G02
1150
Rear reading lights
The lights are switched on or off by pressingeach respective button.
Courtesy lights/door step lighting*
The courtesy lights/door step lighting switchon/off automatically when one of the frontdoors is opened/closed.
Glove compartment lighting
The glove compartment lighting switches on/off automatically when the lid is opened/closed.
Overhead courtesy lighting
The passenger compartment lighting isswitched on and off automatically when button(3) is in the neutral position.
The lighting comes on and remains on for30 seconds if:
• the vehicle is unlocked from the outsidewith the key or remote control
• the engine is switched off and the ignitionis in mode 0.
The lighting switches off when:
• the engine is started
• the vehicle is locked from the outside.
The lighting comes on and remains on for twominutes if one of the doors is open.
The passenger compartment lighting can beswitched on and off manually within 30 minutesafter the vehicle has been unlocked.
If the lighting is switched on manually and thevehicle is locked, the courtesy lighting willswitch off automatically after one minute.
Cargo area lighting
The cargo area lighting comes on automaticallywhen the tailgate is opened.
Home safe lighting
When you leave your vehicle at night, you canmake use of the home safe lighting function toilluminate the area in front of the vehicle.
1. Remove the key from the ignition slot.
2. Pull the turn signal lever as far as possibletowards the steering wheel and release it.
3. Exit the vehicle and lock the doors.
The headlights, parking lights, turn signals,lights in the door mirrors, license plate lights,and footwell lighting will illuminate and remainon for 30 1, 60 or 90 seconds. The time intervalcan be set under Car settings Light
settings Home safe light duration. Fora description of the menu system, seepage 124.
Approach lighting
Approach lighting is activated by pressing theapproach light button on the remote key (seethe illustration on page 56).
When the function has been activated, theparking lights, indicator lights, door mirrorlights, license plate lighting, dome lighting anddoor step lighting come on.
1 Factory setting
03 Your driving environment
Lighting
03
93
The time interval for this lighting can be setunder Car settings Light settings
Approach light duration. For a descriptionof the menu system, see page 124.
03 Your driving environment
Wipers and washers
03
94 * Option/accessory, for more information, see Introduction.
Windshield wipers/washers
Windshield wipers and washers
Rain sensor* on/off
Thumb wheel sensitivity/frequency
CAUTION
• Use ample washer fluid when washingthe windshield. The windshield shouldbe thoroughly wet when the wipers arein operation.
• Before using the wipers, ice and snowshould be removed from the wind-shield/rear window. Be sure the wiperblades are not frozen in place.
Windshield wipers off
Move the lever to position 0 to switchoff the windshield wipers.
Single sweep
Move the lever upward from position0 to sweep the windshield one stroke
at a time for as long as the lever is held up.
Intermittent wiping
With the lever in this position, you canset the wiper interval by twisting the
thumb wheel upward to increase wiper speedor downward to decrease the speed.
Continuous wiping
The wipers operate at normal speed.
The wipers operate at high speed.
Windshield wiper service position
The windshield wipers must be in the serviceposition before the wiper blades can becleaned or replaced. See page 271 for addi-tional information.
Rain sensor*
The rain sensor automatically regulates wiperspeed according to the amount of water on thewindshield. The sensitivity of the rain sensorcan be adjusted moving the thumb wheel up
(the wipers will sweep the windshield more fre-quently) or down (the wipers will sweep thewindshield less frequently).
NOTE
The wipers will make an extra sweep eachtime the thumb wheel is adjusted upward.
When the rain sensor is activated, the symbol will illuminate in the instrument panel.
Activating and setting the sensitivity
When activating the rain sensor, the vehiclemust be running or in ignition mode II and thewindshield wiper lever must be in position 0 orin the single sweep position.
Activate the rain sensor by pressing the button. The windshield wipers will make one
sweep.
Press the lever up for the wipers to make anextra sweep. The rain sensor returns to activemode when the stalk is released back to posi-tion 0.
Deactivating
Deactivate the rain sensor by pressing the but-ton or press the lever down to anotherwiper position.
03 Your driving environment
Wipers and washers
03
��
* Option/accessory, for more information, see Introduction. 95
The rain sensor is automatically deactivatedwhen the key is removed from the ignition slotor five minutes after the ignition has beenswitched off.
CAUTION
The rain sensor should be deactivated whenwashing the car in an automatic car wash,etc. If the rain sensor function is left on, thewipers will start inadvertently in the carwash and could be damaged.
Windshield washing
Washing function
Move the lever toward the steering wheel tostart the windshield and headlight washers.
After the lever is released the wipers make sev-eral extra sweeps.
Heated washer nozzles*
The washer nozzles are heated automaticallyin cold weather to help prevent the washer fluidfrom freezing.
High-pressure headlight washing*
High-pressure headlight washing consumes alarge quantity of washer fluid. To save fluid, theheadlights are washed using two alternatives:
• Low/high beam headlights on. The head-lights will be washed the first time the wind-shield is washed. Thereafter, the head-lights will only be washed once for everyfive times the windshield is washed withina 10-minute period.
• Parking lights on. Optional Active Bend-ing Lights will be washed once for everyfive times the windshield is washed. Nor-mal halogen headlights will not be washed.
CAUTION
Use ample washer fluid when washing thewindshield. The windshield should be thor-oughly wet when the wipers are in opera-tion.
Tailgate wiper/washer
G01
7632
Move the lever forward to start the tailgate washer.
Intermittent wiping
Normal (continuous) wiping
NOTE
The rear wiper is equipped with cut-off func-tion, which means that it will not operate ifits electric motor overheats. The wiper willfunction again after a cool-down period(30 seconds or longer, depending on theheat of the motor and ambient temperatureconditions).
03 Your driving environment
Wipers and washers
03
96 * Option/accessory, for more information, see Introduction.
Tailgate wiper and reverse gear
If the windshield wipers are on and the trans-mission is put into reverse gear, the tailgatewiper will go into intermittent wiping function1.This function is deactivated when a differentgear is selected.
NOTE
On vehicles with the optional rain sensor,the tailgate wiper will be activated whenreverse is selected, if the rain sensor is acti-vated and it is raining.
If the tailgate wiper is in the normal (continuous)wiping mode, selecting different gears will notaffect its function.
IR-reflecting windshield*
Section of the windshield where the IR-coating isnot applied
Dimensions
A 1.9 in. (47 mm)
B 3.4 in. (87 mm)
An optional factory-installed infrared (IR) coa-ting can be applied to the windshield to helpprotect the cabin from the sun's heat and thefading effect of sunlight on upholstery, panels,etc.
Electronic equipment such as garage dooropeners, electronic toll tags and similar devi-
ces should not be placed on sections of thewindshield with the IR coating because thiscould affect their function and limit their range.
For best performance, place the device on thesection of the windshield without the IR coating(see the area marked in the illustration).
1 Consult your Volvo retailer if you would like to have this function deactivated.
03 Your driving environment
Power windows
03
��
* Option/accessory, for more information, see Introduction. 97
Power windows
G01
8516
Driver's door control panel
Switch for power child safety locks* anddisengaging rear power window buttons,see page 51
Rear window controls
Front window controls.
WARNING
• Always remove the ignition key whenthe vehicle is unattended.
• Never leave children unattended in thevehicle.
• Make sure that the windows are com-pletely unobstructed before they areoperated.
Operating
G01
8517
Operating the power windows
Manual up/down
Auto up/down.
All power windows can be operated using thecontrol panel in the driver's door. The controlpanels in the other doors only operate the win-dow in the respective doors.
For the power windows to function, the ignitionmust be in at least mode I. When the vehiclehas been running, the power windows can beoperated for several minutes after the remotekey has been removed from the ignition slot, oruntil a door has been opened.
NOTE
• Movement of the windows will stop ifthey are obstructed in any way.
• To reduce buffeting wind noise if therear windows are opened, also open thefront windows slightly.
Manual up/down
� Move one of the controls up/down slightly.> The power windows move up/down as
long as the control is held in position.
Auto up/down
� Move one of the controls up/down as faras possible and release it.> The window will open or close com-
pletely.
Resetting
If the battery has been disconnected, the autoopen function must be reset so that it will workproperly.
1. Gently raise the front section of the buttonto close the window and hold it for onesecond.
2. Release the button briefly.
3. Raise the front section of the button againfor one second.
03 Your driving environment
Power windows
03
98 * Option/accessory, for more information, see Introduction.
Laminated glass*
This glass is reinforced to help pro-vide protection against break-ins andimproved sound insulation in thepassenger compartment.
The windshield, optional monroof and otherwindows have laminated glass.
03 Your driving environment
Mirrors
03
��
* Option/accessory, for more information, see Introduction. 99
Power door mirrors
G01
8518
Door mirror controls
Adjusting
1. Press the L button for the left door mirroror the R button for the right door mirror.The light in the button comes on.
2. Adjust the position with the joystick in thecenter.
3. Press the L or R button again. The lightshould no longer be on.
WARNING
Objects seen in the mirrors may appear fur-ther away than they actually are.
Retractable power door mirrors*
The mirrors can be retracted for parking/drivingin narrow spaces:
1. Press down the L and R buttons at thesame time.
2. Release them after approximately one sec-ond. The mirrors automatically stop in thefully retracted position.
Fold out the mirrors by pressing down the Land R buttons at the same time. The mirrorsautomatically stop in the fully extended posi-tion.
Storing the position*
The mirror positions are stored in the key mem-ory when the vehicle has been locked with theremote key. When the vehicle is unlocked withthe same remote control the mirrors and thedriver's seat adopt the stored positions whenthe driver's door is opened.
The function can be activated/deactivatedunder Car key memory Seat & mirror
positions. For a description of the menu sys-tem, see page 124.
Tilting the door mirrors when parking*
The door mirrors can be tilted down to helpgive the driver a better view along the sides ofthe vehicle, for example when parallel parking.
To activate this function, select reverse gearand press the L or R mirror control button to tiltthe mirror down.
The function can be activated/deactivatedunder Car settings Door mirror settings
Auto tilt left mirror or Auto tilt right
mirror. For a description of the menu system,see page 124.
The door mirror will reset to its normal position:
• after 10 seconds when reverse is disen-gaged and the car remains stopped.
• immediately when reverse is disengagedand the vehicle's forward speed exceedsapproximately 6 mph (10 km/h).
• immediately if you press the correspond-ing L or R button again.
• when the engine is turned off.
• when the side mirrors are folded in.
NOTE
Only one mirror can be tilted down at a time.
Automatically tilting the door mirrors
when parking
The door mirrors can tilt down automatically tohelp give the driver a better view along thesides of the vehicle, for example when parallelparking. When the transmission is no longer in
03 Your driving environment
Mirrors
03
100
reverse, the mirrors will automatically return totheir original position.
This function can be activated/deactivated inCar settings Door mirror settings Auto
tilt left mirror or Auto tilt right mirror.
Automatic retraction when locking
When the vehicle is locked/unlocked with theremote key the door mirrors are automaticallyretracted/extended.
The function can be activated/deactivatedunder Car settings Fold mirr. when
locking. For a description of the menu system,see page 124.
Resetting to neutral
Mirrors that have been moved out of positionby an external force must be electrically resetto the neutral position for electric retracting/extending to work.
• Retract the mirrors with the L and R but-tons.
• Fold them out again with the L and R but-tons.
The mirrors are now reset in neutral position.
Home safe and approach lighting
The light on the door mirrors comes on whenapproach lighting or home safe lighting isselected, see page 92.
Rear window and door mirrordefrosters
Use the defroster to quickly remove fog and icefrom the rear window and the door mirrors.
Press the button once to start simultaneousrear window and door mirror defrosting. Thelight in the button indicates that the function isactive. Switch the function off when then win-dows have cleared to help avoid battery drain.
The rear window is defogged/de-iced auto-matically if the vehicle is started in an outsidetemperature lower than 45 °F (7 °C). Auto-defrosting can be selected under Climate
settings Auto rear defroster. Selectbetween On or Off.
Interior rearview mirror
Auto-dim function
An integrated sensor reacts to headlights fromfollowing traffic and automatically reducesglare in the mirror.
03 Your driving environment
Compass*
03
* Option/accessory, for more information, see Introduction. 101
Operation
G02
9737
Rearview mirror with compass.
The rearview mirror has an integrated displaythat shows the compass direction in which thevehicle is pointing. Eight different directions areshown with the abbreviations: N (north), NE
(north east), E (east), SE (southeast), S (south),SW (southwest), W (west) and NW (northwest).
The compass is displayed automatically whenthe vehicle is started or in ignition mode II. Toswitch the compass on/off use a pen or similarobject and press in the button on the rear sideof the mirror.
Calibration
The compass may need to be calibrated if, forexample, the vehicle is driven into a new mag-
netic zone. The character C is shown in themirror's display if calibration is necessary.
1. Stop the vehicle in a large open area, safelyout of traffic and away from steel structuresand high-tension electrical wires.
2. Start the vehicle.
NOTE
For best results from calibration, switch offall electrical equipment in the vehicle (cli-mate system, windshield wipers, audio sys-tem, etc.) and make sure that all doors areclosed.
3. Using a pen or similar object, press andhold the button on the rear side of mirroruntil C is shown again in the mirror(afterapprox. 6 seconds).
4. Drive as usual. C disappears from the dis-play when calibration is complete.
Alternative calibration method:
Drive slowly in a circle at a speed of nomore than 5 mph (8 km/h) until C disap-pears from the display when calibration iscomplete.
Selecting a magnetic zone
15
14
13
12
119
8
76
5
4
3
2
1
10
G01
8632
Magnetic zones.
The earth is divided into 15 magnetic zones.The correct zone must be selected for the com-pass to work correctly.
1. Put the ignition in mode II.
2. Using a pen or similar object, press andhold the button on the rear side of mirrorfor at least 3 seconds. The number for thecurrent area will be shown.
3. Press the button repeatedly until the num-ber for the required geographic area(1 – 15) is shown.
4. The display will revert to showing the com-pass direction after several seconds.
03 Your driving environment
Power moonroof*
03
102 * Option/accessory, for more information, see Introduction.
Introduction
The moonroof controls are located in the ceil-ing console near the rearview mirror. Themoonroof can be opened vertically and hori-zontally. The vehicle's ignition must be inmode I or II for the moonroof to be operated.
CAUTION
• Remove ice and snow before openingthe moonroof.
• Do not operate the moonroof if it is fro-zen closed.
• Never place heavy objects on themoonroof.
Sliding moonroof
G01
7823
Sliding moonroof, forward/rearward
Opening, automatic
Opening, manual
Closing, manual
Closing, automatic
Automatic opening
� Pull the switch as far back as possible (tothe position for automatic opening) andrelease it to automatically fully slide openthe moonroof.
Manual opening
� Pull the switch back to the first stop (theposition for manual opening) and hold ituntil the moonroof has opened to the posi-tion of your choice.
Manual closing
� Push the switch forward to the first stop(the position for manual closing) and holdit until the moonroof has closed to the posi-tion of your choice, or has closed com-pletely.
Automatic closing
� Push the switch as far forward as possible(the position for automatic closing) andrelease it to automatically close the moon-roof.
WARNING
• During manual closing, if the moonroofis obstructed, immediately open itagain.
• Never open or close the moonroof if it isobstructed in any way.
• Never allow a child to operate themoonroof.
• Never leave a child alone in a vehicle.
• Never extend any object or body partthough the open moonroof, even if thevehicle's ignition is completelyswitched off.
03 Your driving environment
Power moonroof*
03
* Option/accessory, for more information, see Introduction. 103
Tilt position
G02
8900
Tilt position, raised at the rear edge
Open by pressing the rear edge of the con-trol upward.
Close by pulling the rear edge of the con-trol downward and hold it until the moon-roof has closed completely.
Visor
The moonroof features a sliding visor. The visorslides open automatically when the moonroofis opened, and must be closed manually.
Wind blocker
The moonroof is equipped with a wind blockerthat folds up when the moonroof is open.
03 Your driving environment
HomeLink® Wireless Control System*
03
104 * Option/accessory, for more information, see Introduction.
Introduction
The HomeLink1 Wireless Control System pro-vides a convenient way to replace up to threehand-held radio-frequency (RF) transmittersused to activate devices such as gate opera-tors, garage door openers, entry door locks,security systems, even home lighting. Addi-tional HomeLink information can be found onthe Internet at www.homelink.com.
WARNING
• If you use HomeLink to open a garagedoor or gate, be sure no one is near thegate or door while it is in motion.
• When programming a garage dooropener, it is advised to park outside ofthe garage.
• Do not use HomeLink with any garagedoor opener that lacks safety stop andreverse features as required by U.S.federal safety standards (this includesany garage door opener model manu-factured before April 1, 1982). A garagedoor that cannot detect an object - sig-naling the door to stop and reverse -does not meet current U.S. federalsafety standards. For more information,contact HomeLink at:www.homelink.com.
Retain the original transmitter of the RF deviceyou are programming for use in other vehiclesas well as for future HomeLink programming. Itis also suggested that upon the sale of thevehicle, the programmed HomeLink buttons beerased for security purposes. Refer to “ErasingHomeLink Buttons”.
Programming HomeLink
NOTE
Some vehicles may require the ignitionswitch to be turned on or to the second(“accessories”) position for programmingand/or operation of HomeLink. It is also rec-ommended that a new battery be placed inthe hand-held transmitter of the devicebeing programmed to HomeLink for quickertraining and accurate transmission of theradio-frequency signal.
1. Position the end of your hand-held trans-mitter 1–3 inches (5–14 cm) away from theHomeLink button you wish to programwhile keeping the indicator light in view.
2. Simultaneously press and hold both thechosen HomeLink and hand-held transmit-ter buttons until the HomeLink indicatorlight changes from a slow to a rapidly blink-ing light. Now you may release both theHomeLink and hand-held transmitter but-tons.
1 HomeLink and the HomeLink house are registered trademarks of Johnson Controls, Inc.
03 Your driving environment
HomeLink® Wireless Control System*
03
��
* Option/accessory, for more information, see Introduction. 105
NOTE
Some devices may require you to replacethis Programming Step 2 with proceduresnoted in the “Gate Operator / Canadian Pro-gramming” section. If the HomeLink indica-tor light does not change to a rapidly blink-ing light after performing these steps, con-tact HomeLink at www.homelink.com.
3. Firmly press, hold for five seconds and
release the programmed HomeLink but-ton up to two separate times to activate thedoor. If the door does not activate, pressand hold the just-trained HomeLink buttonand observe the indicator light.
• If the indicator light stays on con-
stantly, programming is complete
and your device should activate whenthe HomeLink button is pressed andreleased.
• If the indicator light blinks rapidly for
two seconds and then turns to a con-
stant light continue with “Program-
ming” steps 4-6 to complete the pro-gramming of a rolling code equippeddevice (most commonly a garage dooropener).
4. At the garage door opener receiver (motor-head unit) in the garage, locate the “learn”or “smart” button. This can usually be
found where the hanging antenna wire isattached to the motor-head unit.
5. Firmly press and release the “learn” or“smart” button. (The name and color of thebutton may vary by manufacturer.) Thereare 30 seconds to initiate step 6.
6. Return to the vehicle and firmly press, holdfor two seconds and release the pro-grammed HomeLink button. Repeat the“press/hold/release” sequence a secondtime, and, depending on the brand of thegarage door opener (or other rolling codeequipped device), repeat this sequence athird time to complete the programmingprocess.
HomeLink should now activate your rollingcode equipped device.
Gate Operator/Canadian Programming
Canadian radio-frequency laws require trans-mitter signals to “time-out” (or quit) after sev-eral seconds of transmission – which may notbe long enough for HomeLink to pick up thesignal during programming. Similar to thisCanadian law, some U.S. gate operators aredesigned to “time-out” in the same manner.
If you live in Canada or you are having difficul-ties programming a gate operator or garagedoor opener by using the “Programming” pro-
cedures, replace “Programming HomeLink”
step 2 with the following:
• Continue to press and hold the HomeLinkbutton while you press and release -
every two seconds (“cycle”) your hand-held transmitter until the HomeLink indica-tor light changes from a slow to a rapidlyblinking light. Now you may release boththe HomeLink and hand-held transmitterbuttons.
Proceed with “Programming” step 3 to com-plete.
Using HomeLink
To operate, simply press and release the pro-grammed HomeLink button. Activation willnow occur for the trained device (i.e., garagedoor opener, gate operator, security system,entry door lock, home/office lighting, etc.). Forconvenience, the hand-held transmitter of thedevice may also be used at any time. In theevent that there are still programming difficul-ties or questions, contact HomeLink at:www.homelink.com.
03 Your driving environment
HomeLink® Wireless Control System*
03
106 * Option/accessory, for more information, see Introduction.
Erasing HomeLink Buttons
To erase programming from the three Home-Link buttons (individual buttons cannot beerased but can be “reprogrammed” as outlinedbelow), follow the step noted:
1. Press and hold the two outer HomeLinkbuttons until the indicator light begins toflash-after 10 seconds.
2. Release both buttons. Do not hold forlonger that 20 seconds.
HomeLink is now in the train (or learning) modeand can be programmed at any time beginningwith “Programming” - step 1.
Reprogramming a Single HomeLinkButton
To program a device to HomeLink using aHomeLink button previously trained, followthese steps:
1. Press and hold the desired HomeLink but-ton. DO NOT release the button.
2. The indicator light will begin to flash after20 seconds. Without releasing the Home-Link button, proceed with “Programming”- step 1.
For questions or comments, contact HomeLinkat: www.homelink.com or 1–800–355–3515.
This device complies with FCC rules part 15and Industry Canada (IC) RSS-210. Operationis subject to the following two conditions: (1)This device may not cause harmful interfer-ence, and (2) This device must accept anyinterference that may be received includinginterference that may cause undesired opera-tion.
NOTE
The transmitter has been tested and com-plies with FCC and IC rules. Changes ormodifications not expressly approved bythe party responsible for compliance couldvoid the user’s authority to operate thedevice.2
2 The term “IC:” before the certification/registration number only signifies that Industry Canada technical specifications were met.
03 Your driving environment
Starting the engine
03
��
* Option/accessory, for more information, see Introduction. 107
Start
Ignition switch with remote key inserted (seepage 79 for more information on ignition modes)
WARNING
Before starting the engine:
• Fasten the seat belt.
• Check that the seat, steering wheel andmirrors are adjusted properly.
• Make sure the brake pedal can bedepressed completely. Adjust the seatif necessary.
1. Insert the remote key into the ignition slotwith the metallic key blade pointing out-ward (not inserted into the slot)1. Pushlightly on the remote key. It will be auto-matically drawn into the ignition slot in thecorrect position.
2. Depress the brake pedal2.
3. Press and release the START/STOP
ENGINE button. The autostart function willoperate the starter motor until the enginestarts.
The starter motor operates for a maximumof 10 seconds. If the engine has notstarted, repeat the procedure.
NOTE
Keyless drive*
To start a vehicle equipped with the keylessdrive feature, one of the remote keys mustbe in the passenger compartment. Followthe instructions in step 3 to start the vehicle.
WARNING
An extra mat on the driver's floor can causethe accelerator and/or brake pedal to catch.Check that the movement of these pedals isnot impeded. Not more than one protectivefloor covering may be used at one time.
1 On vehicles with the optional keyless drive, it is only necessary to have a remote key in the passenger’s compartment.2 If the vehicle is moving, it is only necessary to press the START/STOP ENGINE button to start the vehicle.
03 Your driving environment
Starting the engine
03
108
WARNING
• Always remove the remote key from theignition slot when leaving the vehicle,especially if there are children in thevehicle.
• Never remove the remote key from theignition slot while driving or when thevehicle is being towed. The steeringlock could otherwise be activated, mak-ing it impossible to steer the vehicle. Onvehicles with the optional keyless drive,never remove the remote key from thevehicle while driving or during towing.
• Always place the gear selector in Parkand apply the parking brake beforeleaving the vehicle. Never leave thevehicle unattended with the engine run-ning.
• Always open garage doors fully beforestarting the engine inside a garage toensure adequate ventilation. Theexhaust gases contain carbon monox-ide, which is invisible and odorless butvery poisonous.
NOTE
• After a cold start, idle speed may benoticeably higher than normal for ashort period. This is done to help bringcomponents in the emission controlsystem to their normal operating tem-perature as quickly as possible, whichenables them to control emissions andhelp reduce the vehicle's impact on theenvironment3.
• Keylock: Your vehicle is equipped witha keylock system. When the engine isswitched off, the gear selector must bein the Park position before the key canbe removed4 from the ignition slot.
CAUTION
• When starting in cold weather, the auto-matic transmission may shift up atslightly higher engine speeds than nor-mal until the automatic transmissionfluid reaches normal operating tem-perature.
• Do not race a cold engine immediatelyafter starting. Oil flow may not reachsome lubrication points fast enough toprevent engine damage.
• The engine should be idling when youmove the gear selector. Never acceler-ate until after you feel the transmissionengage. Accelerating immediately afterselecting a gear will cause harshengagement and premature transmis-sion wear.
• Selecting P or N when idling at a stand-still for prolonged periods of time willhelp prevent overheating of the auto-matic transmission fluid.
3 If the gear selector is in the D or R positions and the car is not moving, engine speed (rpm) will be lower and it will take longer for the engine to reach normal operating temperature.4 Does not apply to vehicles with the optional keyless drive.
03 Your driving environment
Starting the engine
03
��
109
Switching off the engine
With the engine running, press the START/
STOP ENGINE button.
If the gear selector is not in the P position or ifthe vehicle is moving, press the button twice orpress and hold it in until the engine switchesoff.
Jump starting
G02
1347
Connecting the jumper cables
Follow these instructions to jump start yourvehicle's dead battery or to jump start anothervehicle's dead battery using your vehicle. If the12-volt auxiliary battery to be used is in anothervehicle, check that the vehicles are not touch-ing to prevent premature completion of a cir-cuit. Be sure to follow jump starting instruc-tions provided for the other vehicle.
To jump start your vehicle:
1. Switch off the ignition (set the ignition tomode 0, see page 79).
2. First connect the red jumper cable to theauxiliary battery's positive (+) terminal (1).
3. Fold back the cover over the positive (+)terminal on your vehicle's battery (2),marked with a "+" sign, located under afolding cover.
4. Connect the black jumper cable to the aux-iliary battery's negative (–) terminal (3) andto the ground point in your vehicle's enginecompartment (right engine mount at thetop, on the outer screw) (4).
5. Start the engine in the assisting vehicle,then start the engine in the vehicle withdead battery.
6. After the engine has started, first removethe negative (–) terminal jumper cable(black). Then remove the positive (+) termi-nal jumper cable (red).
WARNING
PROPOSITION 65 WARNING!
Battery posts, terminals, and related acces-sories contain lead and lead compounds,chemicals known to the state of Californiato cause cancer and reproductive harm.Wash hands after handling.
CAUTION
Connect the jumper cables carefully toavoid short circuits with other componentsin the engine compartment.
03 Your driving environment
Starting the engine
03
110
WARNING
• Do not connect the jumper cable to anypart of the fuel system or to any movingparts. Avoid touching hot manifolds.
• Batteries generate hydrogen gas, whichis flammable and explosive.
• Battery fluid contains sulfuric acid. Donot allow battery fluid to contact eyes,skin, fabrics or painted surfaces. If con-tact occurs, flush the affected areaimmediately with water. Obtain medicalhelp immediately if eyes are affected.
• Never expose the battery to open flameor electric spark.
• Do not smoke near the battery.
• Failure to follow the instructions forjump starting can lead to injury.
03 Your driving environment
Transmission
03
��
111
Automatic transmission
G02
1351
Shiftgate positions1
Depress the button on the front of the gearselector knob to move the gear selectorbetween the R, N, D, and P positions.
The gear selector can be moved freely betweenthe Geartronic (manual shifting) and Drive (D)positions while driving.
Park position (P)
Select the P position when starting or parking.
Keylock
To remove the remote key from the ignitionslot, the gear selector must be in the P position.The remote key is locked in the slot in all otherpositions.
Shiftlock
When P has been selected, the transmission ismechanically blocked in this position. Thebrake pedal must be depressed and the igni-tion must be in at least mode II (see page 79)before the gear lever can be moved from theP position.
Always apply the parking brake when the vehi-cle is parked. Press the control to apply thebrake, see page 116.
G02
1350
CAUTION
The vehicle must be stationary when posi-tion P is selected.
Reverse (R)
The vehicle must be stationary when positionR is selected.
Neutral position (N)
No gear is engaged and the engine can bestarted with the gear selector in this position.Apply the parking brake if the vehicle is sta-tionary with the gear selector in position N.
Drive (D)
D is the normal driving position. The car auto-matically shifts between the various forwardgears, based on the level of acceleration andspeed. The car must be at a standstill whenshifting from position R to position D.
Sport (S)2
Sport mode offers more immediate engineresponse and allows the transmission to shiftup at higher rpm.
To access Sport mode (S), move the gearselector to the right from Drive (D). The infor-mation display will change from D to S.
Sport mode can be selected at any time.
1 The information display (see page 73) shows the gear selector's position or the selected gear by displaying the following: P, R, N, D, S, 1, 2, 3, 4, 5, or 6.2 Available in certain markets only, on models with 6-cylinder turbo engines.
03 Your driving environment
Transmission
03
112
Geartronic–manual shifting
Geartronic allows you to manually shift amongyour vehicle's six forward speeds. Geartroniccan be selected at any time.
• To access the manual shifting positionfrom Drive (D), move the gear selector tothe right (to the area marked M in the illus-tration.
NOTE
On models equipped with Sport mode, thetransmission will not switch to manual shift-ing mode until the gear selector is movedforward or rearward. The selected gear willthen be shown in the information display(see page 73).
• To return to the D position from the manualshifting position, move the gear selector tothe left.
While driving
• If you select the manual shifting positionwhile driving, the gear that was being usedin the Drive position will also initially beselected in the manual shifting position.
• Move the gear selector forward (toward"+") to shift to a higher gear or rearward(toward "–") to shift to a lower gear.
• If you hold the gear selector toward "–", thetransmission will downshift one gear at atime and will utilize the braking power ofthe engine. If the current speed is too highfor using a lower gear, the downshift willnot occur until the speed has decreasedenough to allow the lower gear to be used.
• If you slow to a very low speed, the trans-mission will automatically shift down.
Shiftlock – Neutral (N)
If the gear selector is in the N position and thevehicle has been stationary for at least 3 sec-onds (irrespective of whether the engine is run-ning) then the gear selector is locked.
To be able to move the gear selector from N toanother gear position, the brake pedal must bedepressed and the ignition must be in posi-tion II, see page 79.
Geartronic–starting on slippery surfaces
Selecting 3rd gear in Geartronic’s manual shift-ing mode can help provide better traction whenstarting off on slippery surfaces. To do so:
1. Depress the brake pedal and move thegear selector to the right from the D posi-tion to the manual shifting position. Thetext in the instrument panel display willchange from D to 1.
2. Press the gear selector forward andrelease it (this selects 2nd gear). Press theselector forward again and release it toselect 3rd gear.
3. Release the brake pedal and press gentlyon the accelerator pedal.
Shiftlock override
If the vehicle cannot be driven, for examplebecause of a dead battery, the gear selectormust be moved from the P position before thevehicle can be moved3.
Lift away the rubber mat on the floor of thestorage compartment behind the centerconsole to expose the small opening foroverriding the shiftlock system.
3 If the battery is dead, the electric parking brake cannot be applied or released. Connect an auxiliary battery if the battery voltage is too low, see page 109.
03 Your driving environment
Transmission
03
113
Insert the key blade into the opening. Pressthe key blade down as far as possible andkeep it held down. Move the gear selectorfrom the P position. For information on thekey blade, see page 58.
Please be aware that overriding the shiftlocksystem does not release the steering wheellock.
All Wheel Drive – AWD4
Your Volvo can be equipped with permanentAll Wheel Drive, which means that power isdistributed automatically between the frontand rear wheels. Under normal driving condi-tions, most of the engine's power is directed tothe front wheels. However, if there is any ten-dency for the front wheels to spin, an electron-
ically controlled coupling distributes power tothe wheels that have the best traction.
NOTE
The message AWD disabled Servicerequired will be appear in the informationdisplay if an electrical fault should occur inthe AWD system. A warning light will alsoilluminate in the instrument panel. If thisoccurs, have the system checked by atrained and qualified Volvo service techni-cian.
4 Standard on certain models.
03 Your driving environment
Brakes
03
114
Brake system
The brake system is a hydraulic system con-sisting of two separate brake circuits. If a prob-lem should occur in one of these circuits, it isstill possible to stop the vehicle with the otherbrake circuit.
If the brake pedal must be depressed fartherthan normal and requires greater foot pressure,the stopping distance will be longer.
A warning light in the instrument panel will lightup to warn the driver that a fault has occurred.
If this light comes on while driving or braking,stop immediately and check the brake fluidlevel in the reservoir.
NOTE
Press the brake pedal hard and maintainpressure on the pedal – do not pump thebrakes.
WARNING
If the fluid level is below the MIN mark in thereservoir or if a brake system message isshown in the information display: DO NOTDRIVE. Have the vehicle towed to a trainedand qualified Volvo service technician andhave the brake system inspected.
Brake lights
The brake lights come on automatically whenthe brakes are applied.
Adaptive brake lights
The adaptive brake lights activate in the eventof sudden braking or if the ABS system is acti-vated. This function causes an additional tail-light on each side of the vehicle to illuminate tohelp alert vehicles traveling behind.
The adaptive brake lights activate if:
• The ABS system activates for more thanapproximately a half second
• In the event of sudden braking while thevehicle is moving at speeds above approx-imately 6 mph (10 km/h)
When the vehicle has come to a stop, the brakelights and additional taillights remain on for aslong as the brake pedal is depressed or untilbraking force on the vehicle is reduced.
Power brakes function only when the
engine is running
The power brakes utilize vacuum pressurewhich is only created when the engine is run-ning. Never let the vehicle roll to a stop with theengine switched off.
If the power brakes are not working, consider-ably higher pressure will be required on thebrake pedal to compensate for the lack ofpower assistance. This can happen for exam-
ple when towing your vehicle or if the engine isswitched off when the vehicle is rolling. Thebrake pedal feels harder than usual.
Water on brake discs and brake pads
affects braking
Driving in rain and slush or passing through anautomatic car wash can cause water to collecton the brake discs and pads. This will cause adelay in braking effect when the pedal isdepressed. To avoid such a delay when thebrakes are needed, depress the pedal occa-sionally when driving through rain, slush, etc.This will remove the water from the brakes.Check that brake application feels normal. Thisshould also be done after washing or startingin very damp or cold weather.
Severe strain on the brake system
The brakes will be subject to severe strainwhen driving in mountains or hilly areas, orwhen towing a trailer. Vehicle speed is usuallyslower, which means that the cooling of thebrakes is less efficient than when driving onlevel roads. To reduce the strain on the brakes,shift into a lower gear and let the engine helpwith the braking. Do not forget that if you aretowing a trailer, the brakes will be subjected toa greater than normal load.
03 Your driving environment
Brakes
03
115
Anti-lock braking system
The Anti-lock Braking System (ABS) helps toimprove vehicle control (stopping and steering)during severe braking conditions by limitingbrake lockup. When the system "senses"impending lockup, braking pressure is auto-matically modulated in order to help preventlockup that could lead to a skid.
The system performs a brief self-diagnostictest when the engine has been started anddriver releases the brake pedal. Another auto-matic test may be performed when the vehiclefirst reaches a speed of approximately 25 mph(40 km/h). The brake pedal will pulsate severaltimes and a sound may be audible from theABS control module. This is normal.
Cleaning the brake discs
Coatings of dirt and water on the brake discsmay result in delayed brake function. This delayis minimized by cleaning the brake linings.
Cleaning the brake pads is advisable in wetweather, prior to long-term parking, and afterthe vehicle has been washed. Do this by brak-ing gently for a short period while the vehicle ismoving.
Emergency Brake Assistance
EBA is designed to provide full brake effectimmediately in the event of sudden, hard brak-
ing. The system is activated by the speed withwhich the brake pedal is depressed.
When the EBA system is activated, the brakepedal will go down and pressure in the brakesystem immediately increases to the maximumlevel. Maintain full pressure on the brake pedalin order to utilize the system completely. EBAis automatically deactivated when the brakepedal is released.
NOTE
• When the EBA system is activated, thebrake pedal will go down and pressurein the brake system immediately increa-ses to the maximum level. You mustmaintain full pressure on the brakepedal in order to utilize the system com-pletely. There will be no braking effect ifthe pedal is released. EBA is automati-cally deactivated when the brake pedalis released.
• When the vehicle has been parked forsome time, the brake pedal may sinkmore than usual when the engine isstarted. This is normal and the pedal willreturn to its usual position when it isreleased.
Symbols in the instrument panel
Symbol Specification
Steady glow – Check the brakefluid level. If the level is low, fillwith brake fluid and check forthe cause of the brake fluidloss.
Steady glow for two secondswhen the engine is started –There was a fault in the brakesystem's ABS function whenthe engine was last running.
WARNING
If and come on at the same timeand the brake level is below the MIN markin the reservoir or if a brake system-relatedmessage is shown in the information dis-play: DO NOT DRIVE. Have the vehicletowed to a trained and qualified Volvo serv-ice technician and have the brake systeminspected.
03 Your driving environment
Parking brake
03
116
Electric parking brake
An electric parking brake has the same func-tion as a manual parking brake.
NOTE
• A faint sound from the parking brake'selectric motor can be heard when theparking brake is being applied. Thissound can also be heard during theautomatic function check of the parkingbrake.
• The brake pedal will move slightly whenthe electric parking brake is applied orreleased.
Low battery voltage
If the battery voltage is too low, the parkingbrake cannot be applied or released. Connectan auxiliary battery if the battery voltage is toolow, see page 109.
Applying the electric parking brake
Parking brake control
1. Press firmly on the brake pedal.
2. Push the control.
3. Release the brake pedal and ensure thatthe vehicle is at a standstill.
4. When the vehicle is parked, the gear selec-tor must be in position P.
The symbol in the instrument panelflashes while the parking bake is being applied,and glows steadily when the parking brake hasbeen fully applied.
NOTE
• In an emergency the parking brake canbe applied when the vehicle is movingby holding in the control. Braking will beinterrupted when the accelerator pedalis depressed or the control is released.
• An audible signal will sound during thisprocedure if the vehicle is moving atspeeds above 6 mph (10 km/h).
Parking on a hill
• If the vehicle is pointing uphill, turn the frontwheels so that they point away from thecurb.
• If the vehicle is pointing downhill, turn thefront wheels so that they point toward thecurb.
The parking brake should also be applied.
03 Your driving environment
Parking brake
03
��
* Option/accessory, for more information, see Introduction. 117
Releasing the electric parking brake
Parking brake control
Manual release
1. Fasten the seat belt.
2. Insert the remote key in the ignition slot.
3. Press firmly on the brake pedal.
4. Pull the parking brake control.
Vehicles with Keyless drive*
1. Press the START/STOP ENGINE button.
2. Press firmly on the brake pedal.
3. Pull the parking brake control.
Automatic release
1. Start the engine.
NOTE
• For safety reasons, the parking brake isonly released automatically if the engineis running and the driver is wearing a seatbelt.
• The electric parking brake will bereleased immediately when the acceler-ator pedal is pressed and the gear selec-tor is in position D, R or .
2. Fasten the seat belt
3. Move the gear selector to position D or Rand press the accelerator pedal. The park-ing brake will release when the vehiclebegins to move.
Heavy load uphill
A heavy load, such as a trailer, can cause thevehicle to roll backward when the parkingbrake is released automatically on a steepincline. To help avoid this:
1. Keep the electric parking brake leverpushed in with the left hand while shiftinginto Drive with the right.
2. While pressing the throttle pedal to pullaway, release the parking brake lever onlyafter the vehicle begins to move.
Symbols
Symbol Specification
Read the message in the infor-mation display
A flashing symbol indicates thatthe parking brake is beingapplied. If the symbol flashes inany other situation then thismeans that a fault has arisen.Read the message on the infor-mation display.
Messages
G01
6556
Park brake not fully released – A fault is pre-venting the parking brake from being released.Contact an authorized Volvo workshop. If you
03 Your driving environment
Parking brake
03
118
drive off with this error message showing, awarning signal sounds.
Parking brake not applied – A fault is pre-venting the parking brake from being applied.Try to apply and release. Contact a Volvo work-shop if the message remains.
Parking brake Service required – A fault hasoccurred. Contact a Volvo workshop if the faultremains.
WARNING
If the vehicle must be parked before the faulthas been corrected, always put the gearselector in P and turn the wheels so thatthey point away from the curb if the vehicleis pointing uphill or toward the curb if it ispointing downhill.
03 Your driving environment
Hill Descent Control (HDC)*
03
��
* Option/accessory, for more information, see Introduction. 119
Introduction
Normally, when the accelerator pedal isreleased while driving down hills, the vehicle'sspeed slows as the engine runs at lower rpm(the normal engine braking effect). However, ifthe downhill gradient becomes steeper and ifthe vehicle is carrying a load, speed increasesdespite the engine braking effect. In this situa-tion, the brakes must be applied to reduce thevehicle's speed.
HDC is a type of automatic engine brake andmakes it possible to increase or decrease thevehicle's speed on downhill gradients usingonly the accelerator pedal, without applyingthe brakes. The brake system functions auto-matically to maintain a low and steady speed.
HDC is particularly useful when driving downsteep hills with rough surfaces, and where theroad may have slippery patches.
WARNING
HDC does not function in all situations, andis a supplementary braking aid. The driverhas full responsibility for driving in a safemanner.
Function
• HDC can be switched on and off with thebutton in the center console. An indicatorlight in the button illuminates when HDC isactivated.
• The indicator light in the instrumentpanel illuminates and a message is dis-played when the system is controlling thevehicle's speed.
• HDC only functions when first or reverse
gears are selected (1 will be shown in theinstrument panel display when first gear isselected).
NOTE
HDC cannot be activated if the gear selectoris the D position.
Using HDC
HDC allows the car to roll forward at a maxi-mum speed of 6 mph (10 km/h), and 4 mph(7 km/h) in reverse. However, the acceleratorpedal can be used to select any speed that ispossible in first or reverse gears. When theaccelerator pedal is released, speed is quicklyreduced again to 6 mph (10 km/h) or 4 mph(7 km/h), depending on the gear selected,regardless of the hill's gradient. It is not nec-essary to apply the brakes.
• The brake lights illuminate automaticallywhen HDC is controlling the vehicle'sspeed.
• The driver can slow or stop the vehicle atany time by applying the brakes.
HDC is deactivated when:
• The button on the center console ispressed
• A gear higher than first gear is selected
• D is selected on vehicles with an automatictransmission
HDC can be deactivated at any time. If this isdone while driving down a steep hill, the sys-tem's braking effect will decrease gradually.
03 Your driving environment
Hill Descent Control (HDC)*
03
120 * Option/accessory, for more information, see Introduction.
NOTE
Engine response to pressure on the accel-erator pedal may be slightly slower thannormal when HDC is activated.
122 * Option/accessory, for more information, see Introduction.
Menus and messages........................................................................... 124Climate system..................................................................................... 128Audio system........................................................................................ 135
Bluetooth® hands-free connection....................................................... 149Trip computer........................................................................................ 155Stability system..................................................................................... 157Active chassis system–Four C*............................................................. 159Cruise control........................................................................................ 160Adaptive Cruise Control (ACC)*............................................................ 162Distance Alert* ..................................................................................... 171Collision warning with Auto-brake*....................................................... 174Driver Alert System* ............................................................................. 180Park assist*........................................................................................... 185Rear Park Assist Camera (PAC)* .......................................................... 189Blind Spot Information System*............................................................ 192Passenger compartment convenience................................................. 196
04 Comfort and driving pleasure
Menus and messages
04
124 * Option/accessory, for more information, see Introduction.
Center console
Certain functions are controlled from the centerconsole via the menu system or from the key-pad in the steering wheel. Each function isdescribed under its respective section.
The current menu level is shown at the top rightof display in the center console.
Center console controls
Center console with information display and con-trols for menus
Navigation button – scrolls and selectsamong menu options
ENTER – selects menu options
MENU – accesses the menu system
EXIT – leads back one step in the menustructure. A long press exits the menu sys-tem.
Steering wheel keypad
ENTER
EXIT
Navigation buttons.
Buttons (1-3) on the steering wheel keypadhave the same function as those in the centerconsole.
Search paths
Access to some functions is provided directlyvia the function buttons and others areaccessed through the menu system.
Search paths to the menu system functions arelisted as follows: Car settings Lock
settings, if the following steps have been takenfirst:
1. Press MENU.
2. Scroll to the desired menu and pressENTER.
3. Scroll to the desired submenu and pressENTER.
The navigation button can be used instead ofENTER and EXIT when navigating the menuhierarchy. The right arrow is equal to ENTER
and the left arrow to EXIT.
The menu options are numbered and can alsobe selected directly with the numerical keypad(1–9 only).
Menu overview
NOTE
Menu selections will not be available (will be"grayed out") when the vehicle is moving.
Car key memory
Seat & mirror positions
Car settings
Collision warning settings*
Light settings
Lock settings
Reduced guard1
04 Comfort and driving pleasure
Menus and messages
04
��
* Option/accessory, for more information, see Introduction. 125
Tire pressure
Door mirror settings
Parking camera settings (accessory)
Lane departure warning*
Steering force level*
Information
Climate settings
Automatic blower adjust
Recirculation timer
Auto. rear defroster
Reset climate settings
Main menu AM
HD radio
Audio settings2
Sound stage
Equalizer, front
Equalizer, rear
Auto. volume control
Resets all audio settings.
Main menu FM
HD radio
FM settings
Radio text
Advanced radio settings
Audio settings
Main menu CD
Random
Off
Folder
Disc
Single disc
All discs
CD settings
Track information*
Audio settings
Main menu AUX
Volume, AUX input
Audio settings
Main menu USB
USB settings
Audio settings
Track information*
Main iPod menu
iPod settings
Audio settings
Track information*
Main Bluetooth menu
Last 10 missed calls
Last 10 received calls
Last 10 dialled calls
Phone book
Search
Copy fr. mobile phone
Bluetooth*
Connect phone
Change phone
Remove phone
1 Certain models2 The menu option for audio settings is available in all audio sources.
04 Comfort and driving pleasure
Menus and messages
04
126
Phone settings
Call options
Sounds and volume
Synchronize phone book
Main instrument panel
G02
2908
Information display and menu controls
READ – access to the list of messages andmessage confirmation.
Thumbwheel – browse among menus andoptions in the list of functions.
RESET – reset the active function. Used incertain cases to select/activate a function,see the explanation under each respectivefunction.
The menus shown on the information displaysin the instrument panel are controlled with theleft lever. The menus shown depend on ignitionmode. Press READ to erase a message andreturn to the menus.
Menu overview
Driving distance on current fuel reserve
Average
Instantaneous
Average speed
Current speed in mph (Canadian models
only)
DSTC
Messages
G02
8940
When a warning, information or indicator sym-bol comes on, a corresponding messageappears on the information display. An errormessage is stored in a memory list until thefault is rectified.
Press READ to acknowledge and scroll amongthe messages.
NOTE
If a warning message appears while you areusing the trip computer, the message mustbe read and confirmed by pressing READbefore the previous activity can beresumed.
Message Description
Stop safely Stop and switch offthe engine. Seriousrisk of damage.Contact an author-ized Volvo work-shop.
Stopping the
engine
Stop and switch offthe engine. Seriousrisk of damage.Contact an author-ized Volvo work-shop.
04 Comfort and driving pleasure
Menus and messages
04
127
Message Description
Service urgent Have the vehiclechecked by anauthorized Volvoworkshop immedi-ately.
Service required Have the vehiclechecked by anauthorized Volvoworkshop as soonas possible.
See manual Read the owner'smanual.
Book time for
maintenance
Time to book serviceat an authorizedVolvo retailer.
Time for regular
maintenance
Time for regularservice at an author-ized Volvo work-shop. The timing isdetermined by thenumber of milesdriven, number ofmonths since thelast service, enginerunning time.
Message Description
Maintenance over-
due
If the service inter-vals are not fol-lowed, the warrantydoes not cover anydamaged parts.Contact an author-ized Volvo workshopfor service.
Temporarily OFF A function has beentemporarilyswitched off and isreset automaticallywhile driving or afterstarting again.
Power save mode The audio system isswitched off to savecurrent. Charge thebattery.
04 Comfort and driving pleasure
Climate system
04
128 * Option/accessory, for more information, see Introduction.
Introduction
Air conditioning
The vehicle is equipped with Electronic ClimateControl (ECC). The climate control systemcools, heats or dehumidifies the air in the pas-senger compartment.
NOTE
• The air conditioning can be switchedoff, but to ensure the best possible cli-mate comfort in the passenger com-partment and to prevent the windowsfrom misting, it should always be on.
• In warm weather, a small amount ofwater may accumulate under the carwhen it has been parked. This water iscondensation from the A/C system andis normal.
Sensor location
• The sunlight sensor is located on the topside of the dashboard.
NOTE
The sunlight sensor monitors which side ofthe car that is most exposed to sunlight.This can mean that the temperature maydiffer between the right and left-side airvents, even if the temperatures set for bothsides of the passenger compartment are thesame.
• The temperature sensor for the passengercompartment is located below the climatecontrol panel.
• The outside (ambient) temperature sensoris located on the door mirror.
• The humidity sensor* is located in the inte-rior rearview mirror.
NOTE
Do not cover or block the sensors withclothing or other objects.
Side windows and moonroof
To ensure that the air conditioning works opti-mally, the side windows, and the optionalmoonroof should be closed.
Fog on the inside of the windows
The defroster function should be used toremove fog or mist from the inside of the win-dows. Keeping the windows clean with a com-
mercially available window washing spray willalso help prevent fogging or misting.
Temporary shut-off of the air
conditioning
The air conditioning is momentarily disen-gaged during full-throttle acceleration or whendriving uphill with a trailer. This may result in atemporary increase in cabin temperature.
Ice and snow
Always keep the air intake grille at the base ofthe windshield free of snow.
Climate system maintenance
Special tools and equipment are required tomaintain and carry out repairs on the climatesystem. Work of this type should only be doneby a trained and qualified Volvo service tech-nician.
Refrigerant
Volvo cares about the environment. The airconditioning system in your car contains aCFC-free refrigerant – R134a. This substancewill not deplete the ozone layer. The air condi-tioning system contains 1.7 lbs (770 g) ofR134a. The systems uses PAG oil.
Passenger compartment filter
Replace the cabin air filter with a new one atthe recommended intervals. Please refer to
04 Comfort and driving pleasure
Climate system
04
��
129
your Warranty and Service Records Informa-tion booklet, or consult a trained and qualifiedVolvo service technician for these intervals.The filter should be replaced more often whendriving under dirty and dusty conditions. Thefilter cannot be cleaned and therefore shouldalways be replaced with a new one.
NOTE
There are different types of cabin air filters.Ensure that the correct type is installed.
Interior Air Quality System (IAQS)
A multifilter helps reduce gases and particlesin the incoming air, thereby reducing the levelsof odors and contaminants entering the vehi-cle. The air quality sensor detects increasedlevels of contaminants in the outside air. Whenthe air quality sensor detects contaminatedoutside air, the air intake closes and the airinside the passenger compartment is recircu-lated, i.e. no outside air enters the vehicle. Thefilter also cleans recirculated passenger com-partment air.
NOTE
Contact your Volvo retailer for IAQS air filterreplacement intervals.
Menu settings
The default settings for three of the climatesystem's functions can be changed in themenu system, see page 124:
• Blower speed in automatic mode, seepage 131.
• Recirculation timer for passenger com-partment air, see page 133.
• Automatic rear window defrosting, seepage 100.
The functions can also be returned to factorysettings in the menu system.
Air distribution
G01
7699
The incoming air is distributed from 20 differentvents in the passenger compartment.
Air distribution is fully automatic in AUTO
mode.
If desired, air distribution can be controlledmanually, see page 134.
Air vents in the dashboard
G02
1367
Open
Closed
Horizontal airflow
Vertical airflow
Direct the outer air vents toward the side win-dows to defrost.
04 Comfort and driving pleasure
Climate system
04
130 * Option/accessory, for more information, see Introduction.
Air vents in the door pillars
G02
1368
Open
Closed
Horizontal airflow
Vertical airflow
Direct the outer air vents toward the side win-dows to defrost.
Direct the vents into the passenger compart-ment to help maintain the desired temperaturein the rear seat.
Electronic climate control, ECC
Ventilated front driver's seat*
Blower
Heated front driver's seat*
Air distribution
Ventilated front passenger's seat*
Auto
Heated front passenger's seat*
Temperature control, passenger's side
A/C – On/Off
Heated rear window and door mirrors, seepage 100.
Defroster (maximum effect)
Recirculation/Air quality system
Temperature control, driver's side
Climate system controls
Ventilated front seats*
The ventilation system consists of fans in theseats and backrests that draw air through theseat upholstery. The cooling effect increasesas the air in the passenger compartmentbecomes cooler.
The ventilation is controlled by the ECC sys-tem, which takes into account the seat tem-perature, sunlight in the passenger compart-ment, and the ambient temperature.
The ventilation can be used at the same timeas seat heating.
The ventilation system can be activated whenthe engine is running. There are three comfortlevels that produce different cooling and dehu-midifying effects:
• Level three: press the button once formaximum output – three indicator lightscome on.
• Level two: press the button twice for alower output – two indicator lights comeon.
04 Comfort and driving pleasure
Climate system
04
��
* Option/accessory, for more information, see Introduction. 131
• Level one: press the button three times forthe lowest output – one indicator lightcomes on.
• Press the button a fourth time to switch offthe function – the indicator light will go out.
Heated front seats*
Press the button once for thehighest heat level – three indi-cator lights come on.
Press the button twice for alower heat level – two indica-tor lights come on.
Press the button three times for the lowest heatlevel – one indicator light comes on.
Press the button four times to switch off theheat – no indicator lights come on.
The seat heating is normally switched off whenthe engine is started. If the heating is on whenthe ignition is switched off, the heating will alsoswitch off. Automatic start of the seat heatingcan be activated/deactivated in the menu sys-tem, under: Climate settings Seat heating
off at start
Seat heating is switched off automatically aftera certain length of time. This function can beactivated/deactivated in the menu system,under: Climate settings Seat heating
timer
By default, seat heating is off when the engineis started. If the heating is on, it will automati-cally switch off when the engine is switched off.Automatic start for seat heating can be set inClimate settings Seat heating off at
start
The seat heating switches off automaticallyafter several minutes. This function can be acti-vated/deactivated in Climate settings Seat
heating timer
Heated rear seats*
G02
1376
Heat control for the outboard seating positionsis done in the same way as for the front seats.
Blower control
Turn the control clockwise toincrease or counterclockwiseto decrease the blowerspeed. Pressing the AUTO
switch will automatically reg-ulate blower speed and over-ride manual adjustment.
NOTE
If the blower is turned off completely, the airconditioning is disengaged, which mayresult in fogging on the windows.
Air distribution
The figure consists of threebuttons. When the buttonsare pressed, an indicator lightin front of the respective partof the figure illuminates andshows which manual air flowhas been selected. See also
the air distribution chart on page 134.
04 Comfort and driving pleasure
Climate system
04
132
Auto
The function automaticallyregulates cooling, heating,blower speed, recirculation,and air distribution to main-tain the chosen temperature.If you select one or more man-ual functions, the other func-
tions continue to be controlled automatically.The air quality sensor is engaged and all man-ual settings are switched off when AUTO ispressed. The display shows AUTO
CLIMATE.
Blower speed in automatic mode can be setunder Climate settings Automatic fan
adjust. Choose between Low, Normal orHigh.
NOTE
Selecting the lowest blower speed mayincreases the risk of fog forming on the win-dows.
Temperature control
The temperatures on thedriver and passenger sidescan be set independently.When the vehicle is started,the most recent setting isresumed.
NOTE
Heating or cooling cannot be speeded up byselecting a higher/lower temperature thanthe actual temperature required.
A/C – ON/OFF
The air conditioning is con-trolled automatically by thesystem when the ON light ison. This cools/heats anddehumidifies the incoming air.When the OFF light is on, theair conditioning is always dis-
engaged. Other functions are still controlledautomatically. When defroster is selected, theair conditioning system is set for maximumblower speed and dehumidification.
Defroster
This function defrosts/de-icesthe windshield and front sidewindows. The indicator lightin the defroster button lightswhen the function is active.
• Blower speed increases automatically andthe air conditioning will switch on (if notalready on and if the passenger compart-ment blower is not turned off) to dehumid-ify the air in the passenger compartment.Air conditioning can be switched off bypressing the AC button.
• Recirculation will not function while defrostis engaged.
The climate system will return to its previoussettings when the defroster function isswitched off.
04 Comfort and driving pleasure
Climate system
04
��
* Option/accessory, for more information, see Introduction. 133
Recirculation/air quality system
Recirculation
This function can be used toshut out exhaust fumes,smoke, etc from the passen-ger compartment. The air inthe passenger compartmentis then recirculated, i.e., no airfrom outside the car is taken
into the car when this function is activated. Theindicator light in the button will illuminate whenrecirculation is selected.
If the air in the car recirculates for too long,there is a risk of condensation forming on theinsides of the windows, especially in winter.
Timer
The timer function minimizes the risk of fog-ging, or stale air when the recirculation functionis selected by automatically switching off thefunction after a certain length of time, depend-ing on the ambient temperature. Activate/deactivate the function under Climate
settings Recirculation time. For adescription of the menu system, seepage 124.
NOTE
When Defroster is selected, recirculation isalways deactivated.
Interior Air Quality System–IAQS*
This system consists of a mul-tifilter and an air quality sen-sor. The filter helps removegases and particles from theincoming air, thereby reduc-ing the amounts of odors andcontaminants entering the
vehicle. The air quality sensor detectsincreased levels of contaminants in the outsideair. When the air quality sensor detects conta-minated outside air, the air intake closes andthe air inside the passenger compartment isrecirculated, i.e., no outside air enters the vehi-cle. The filter also cleans recirculated passen-ger compartment air. When the AUTO buttonis depressed the air quality sensor is alwaysengaged.
Activating the air quality sensor
Switch between the threefunctions by pressing the but-ton repeatedly.
• The left orange light comes on – the airquality sensor is disengaged.
• The center green light comes on – recircu-lation not engaged, providing it is notrequired for cooling in hot weather.
• The right orange light comes on – recircu-lation is engaged.
NOTE
• The air quality sensor should always beengaged in order to obtain the best airin the passenger compartment.
• Recirculation is limited in cold weatherto avoid fogging.
• If the insides of the windows start fog-ging, disengage the air quality sensor.Use the defroster function to increaseairflow to the front, side, and rear win-dows.
04 Comfort and driving pleasure
Climate system
04
134
Air distribution table
Air distribution Use Air distribution Use
Air to windows. Some airflows from the dashboardair vents. The air is notrecirculated. Air condition-ing is always engaged.
To remove de-fog/de-ice the front side win-dows and windshieldquickly.
Air to the floor and windows.Some air flows from thedashboard air vents.
To ensure comfortableconditions and good de-fogging in cold or humidweather.
Air to windshield and sidewindows. Some air flowsfrom the air dashboardvents.
In cold or humidweather (blowerspeed should bemoderate to high).
Air to floor and from dash-board air vents.
In sunny weather withcool outside tempera-tures.
Airflow to windows andfrom dashboard air vents.
To ensure good com-fort in warm, dryweather.
Air to floor. Some air flows tothe dashboard air vents andwindows.
To warm or cool the feet.
Airflow to the head andchest from the dashboardair vents.
To ensure efficientcooling in warmweather.
Airflow to windows, fromdashboard air vents and tothe floor.
To cool the feet or pro-vide warmer air to theupper body in coldweather or hot, dryweather.
04 Comfort and driving pleasure
Audio system
04
��
* Option/accessory, for more information, see Introduction. 135
Introduction
The audio system is available in three versions:Performance, High Performance and PremiumSound. The system version is shown in the dis-play when the audio system is switched on.
If the audio system is on when the ignition isswitched off, it will come on automatically thenext time the ignition is put in mode I or higher.The audio system can be operated without akey in the ignition slot for 15 minutes at a timeby pressing the POWER button (the driver'sdoor must be closed on vehicles with theoptional keyless drive).
Some functions are controlled from the menusystem in the center console. For more infor-mation on menus, see page 124.
Dolby Surround Pro Logic II and the sym-bol are trademarks of Dolby LaboratoriesLicensing Corporation. The Dolby SurroundPro Logic II System is manufactured underlicense from Dolby Laboratories Licensing Cor-poration.
Overview
Socket for external audio source (AUX,USB, iPod 1)*
Steering wheel keypad
Center console control panel
Rear control panel with headphonessocket*
Steering wheel keypad
Confirm selection in menu system andcontrols for a bluetooth-connected cellphone.
Go higher in the menu system. Interruptcurrent function.
Volume
A short press scrolls between CD tracks orpreset radio stations. A long presssearches within CD tracks or searches forradio stations automatically.
Please note that these functions are also avail-able through the audio system controls on cen-ter console.
1 iPod is a registered trademark of Apple Inc.
04 Comfort and driving pleasure
Audio system
04
136 * Option/accessory, for more information, see Introduction.
Audio functions
Center console, controls for audio functions
Internal audio sources: AM, FM and CD
External audio source. For connection, seepage 135
Push button and knob controls for makingsound settings
Navigation button
Volume and on/off
Audio volume and automatic volume
control
The audio system compensates for disruptingnoises in the passenger compartment byincreasing the volume according to the speedof the vehicle. The level of sound compensa-tion can be set at low, medium or high. Select
the level under Audio settings Auto
volume control.
External audio source audio volume
External devices such as an MP3 player can beconnected to the AUX input, see page 135. Thevolume of the external sound source AUX maybe different from the volume of the internalsound sources such as the CD player or theradio. If the external sound source's volume istoo high, the quality of the sound may beimpaired. To help prevent this, adjust the inputvolume of the external audio source:
1. Set the audio system in AUX mode usingMODE and use (4) to navigate to AUX
input volume.
2. Turn the control (3) or press / the nav-igation button.
NOTE
Sound quality may be affected if the MP3player is being charged while the system isin AUX mode. To help prevent this, avoidcharging the MP3 player in a 12-volt socketwhile it is being played.
Sound settings
Press the control (3) repeatedly to toggleamong the sound settings. Adjustments aremade by turning the control (3).
• Bass – Bass level.
• Treble – Treble level.
• Fader – Balance between the front andrear speakers.
• Balance – Balance between the right andleft speakers.
• Subwoofer* – Level for the bass speaker.The subwoofer can be switched off byturning control (3) counterclockwise toMin. The location of the subwoofer isshown in the illustration.
G01
9419
• Surround* – Surround settings.
Under Surround, 3 channel stereo or DolbySurround Pro logic II can be activated byselecting 3-ch or Dpl2 respectively. This ena-bles the following options:
04 Comfort and driving pleasure
Audio system
04
��
137
• Center level2 – Level for the centerspeaker.
• Surround level2 – Level for surroundsound.
Equalizer
Sound levels for different frequencies can beadjusted separately using the equalizer3.
1. Go to Audio settings and selectEqualizer front or Equalizer rear.
The sound level for the frequency isadjusted with / on the navigation but-ton. Press / to select another fre-quency.
2. Use ENTER to save or EXIT to close.
Sound stage4
The sound experience can be optimized for thedriver's seat, both front seats or the rear seat.Select one of the options underAudio settings Sound stage.
Optimal sound reproduction
The audio system is calibrated for optimalsound reproduction using digital signal pro-cessing.
This calibration takes into account factors suchas the speakers, amplifier, cabin acoustics, thelisteners' seating positions, etc., for each com-bination of vehicle/audio system.
There is also a dynamic calibration that takesinto consideration the volume level, radioreception, and the speed of the vehicle.
The settings that are described in this manual,such as Bass, Treble, and Equalizer front/Equalizer rear are only intended to enable theuser to adapt sound reproduction to his/herpersonal tastes.
Radio functions
Center console, controls for radio functions
Navigation button for automatic tuning
Press to cancel a menu selection or aselected function
Manual tuning
Scan the current waveband
Auto store the strongest radio stations inthe area in which you are driving
Station preset buttons
Select waveband AM and FM (FM1 andFM2)
2 Premium Sound3 High Performance and Premium Sound only4 Certain markets only.
04 Comfort and driving pleasure
Audio system
04
138
Automatic tuning
1. Select a waveband using FM or AM.
2. Press / on the navigation button.
Manual tuning
1. Select a waveband using FM or AM.
2. Turn TUNING to select a station.
Preset stations
Ten station presets can be stored for eachwaveband. FM has two memories for presets:FM1 and FM2. The stored presets are selectedusing the preset buttons.
Preset storage can be carried out manually orautomatically.
Manually storing preset stations
1. Tune into a station.
2. Hold in one of the preset buttons until themessage Channel stored appears on thedisplay.
Automatically storing preset stations
The function is especially useful in areas wherethe radio stations and their frequencies areunfamiliar. The ten strongest radio stations arestored automatically in a separate memory.
1. Select a waveband using FM or AM.
2. Hold in AUTO until Autostoring appearson the display.
Once Autostoring disappears from the dis-play, the stations are stored. The radio contin-ues in Auto mode and Auto appears on thedisplay. The automatically stored presets cannow be selected using the preset buttons.Automatic preset storage can be cancelledusing EXIT.
Auto mode is cancelled by pressing for exam-ple AUTO or FM.
Returning to Auto mode provides access to theautostored presets:
1. Press AUTO.> Auto appears on the display.
2. Press a preset button.
Scan
The function automatically searches the cur-rent waveband for strong stations. When a sta-tion is found, it is played for approx. eight sec-onds before scanning is resumed. While thestation is playing it can be stored as a presetas usual.
NOTE
Storing a station interrupts the SCAN func-tion.
1. Select a waveband using AM or FM.
2. Press SCAN.> SCAN appears on the display. Close
using SCAN or EXIT.
Radio text
Some stations transmit information on pro-gram content, artists, etc. This information canbe shown on the display.
Activate/deactivate in FM mode under Radio
text.
04 Comfort and driving pleasure
Audio system
04
��
* Option/accessory, for more information, see Introduction. 139
USB5/iPod connector*
AUX and USB sockets in the storage compartmentbetween the front seats
An auxiliary device, such as an iPod , MP3player or a USB flash drive can be connectedto the audio system via the connectors in thecenter console storage compartment. A stand-ard cable from an iPod or MP3 player can berouted under the cover to the AUX connectorin the storage compartment.
A sound source must be chosen, depending onthe device that has been connected:
1. Use MODE to select iPod or USB. The textConnect device will be displayed.
2. Connect the device to the connector in thecenter console storage compartment (seethe illustration).
The text Loading will be displayed while thesystem loads the files (folder structure) on thedevice. This may take a short time.
When information about the files (the folderstructure) on the device has been loaded, theresulting list includes information on the artist,genre and song title.
To navigate in the folder structure, pressENTER and scroll up and down the foldersusing the arrow buttons (on the audio systemcontrol panel or on the steering wheel keypad).Press the right arrow button to select a folder.Press the left arrow button to go up a level inthe folder structure. Press ENTER to go downa level in the folder structure.
Tracks can be selected in two ways:
• Turn the manual tuning knob clockwise orcounterclockwise
• Use the right or left arrow keys on the nav-igation control to select the desired track.The arrow keys on the steering wheel key-pad can also be used in the same way.
NOTE
The system supports playback of files in themost common versions of formats such asmp3, wma, and wav. However, there may beversions of these formats that the systemdoes not support.
The system also supports a number ofiPod models produced in 2005 or later.
USB flash drive
To simplify the use of a USB flash drive, it isadvisable to only store music files on the drive.It will take considerably longer for the systemto index the files on the drive if it contains any-thing other than compatible music files.
NOTE
• The system supports removable mediathat uses the USB 2.0 standard and theFAT32 file system and can index up to500 folders and a maximum of 64,000files. The device must have at least 256Mb of memory.
• When using a longer type of USB flashdrive, connecting it with a USB adaptercable will help reduce mechanical wearon the USB socket and the USB flashdrive.
5 High Performance and Premium Sound only
04 Comfort and driving pleasure
Audio system
04
140 * Option/accessory, for more information, see Introduction.
MP3 player
Many MP3 players have a file indexing systemthat is not supported by the vehicle's audiosystem. In order to use an MP3 player, the sys-tem must be set to USB Removable device/Mass Storage Device.
iPod
An iPod receives current and its battery ischarged through the connecting cord. How-ever, if the iPod's battery is completelydrained, it should be recharged before theiPod is connected to the audio system.
NOTE
When an iPod is used as a sound source,the vehicle's audio system has a menustructure similar to the one in the iPod . Seethe iPod's manual for detailed information.
For further information, refer to the accessorymanual USB/iPod Music Interface.
Rear control panel with headphonessocket*
Headphones with an impedance of16 – 32 ohm and sensitivity of 102 dB or higherare recommended for best sound reproduc-tion.
Volume control (right/left sides)
Scroll/search forward and back
MODE – select AM, FM, HD Radio 6, CD,AUX, USB/iPod * and ON/OFF.
Headphones sockets (3.5 mm)
Activating/deactivating
The control panel is activated by pressingMODE when the audio system is switched on.
It is switched off automatically when the audiosystem is switched off or by a long press onMODE.
Scroll/search forward and backward
Short presses on (2) are used to scroll betweenCD tracks or preset radio stations. Longpresses are used to fast-wind CD tracks or tosearch for radio stations automatically.
Limitations
The audio source (FM, AM, CD, etc.) beingplayed in the speakers cannot be controlledfrom the rear control panel.
6 Available on U.S. models only
04 Comfort and driving pleasure
Audio system
04
��
141
HD Radio reception (U.S. modelsonly)
Introduction
Display when the radio is receiving an HD Radiobroadcast
NOTE
HD radio volume may fade in and out attimes due to coverage limitations.
HD radio is a brand name registered by theIbiquity digital corporation7. They are thedeveloper of a broadcasting technology calledIBOC or In Band On Channel, which refers tothe method of transmitting a digital radiobroadcast signal centered on the same fre-
quency as the AM or FM station's present fre-quency.
The IBOC system is referred to as a "hybrid"since it is both analogue and digital. Duringhybrid operation, receivers still continue toreceive the analogue (non-digital) signal. HDradio receivers incorporate both modes ofreception, where the receiver will automaticallyswitch to the analogue signal if the digital signalcannot be decoded or is lost by the receiver.When you have tuned to an HD Radio station,the symbol will appear in the audio sys-tem display.
More information about HD radio and IBOCcan be found on Ibiquity's website,www.hdradio.com and www.ibiquity.com.
Benefits of digital broadcasting
• Better sound (FM sounds near CD qualityand AM as analogue FM).
• Some FM frequencies offer a greater num-ber of listening choices through “multicast-ing” (consisting of a frequency's mainchannel and any sub-channels that mayalso be available on that particular fre-quency. See also the section "Sub-chan-nels" below).
• When receiving a digital signal there is nomultipath disturbance or hisses/pops/crackling due to outside influences.
How HD broadcasting works
HD Radio works similarly to conventional radioand broadcasts of this type are available inmany areas of the United States. However,there are a few key differences:
• Instead of transmitting one analogue sig-nal, stations send out a bundled signal –both analogue and digital.
• An HD radio receiver can receive both dig-ital and analogue broadcasts. Dependingon the terrain and location of the vehicle(which will influence the signal strength),the receiver will determine which signal toreceive.
Limitations
• Main channel vs. sub-channels (FM
only): The main channel is the only channelthat can receive in hybrid mode (both dig-ital and analogue). If a frequency has sub-channels, they are broadcast in digitalmode only. The main FM channel will bedisplayed as, for example, 93.9 WNYC(Volvo uses the symbol > to indicate thereare sub-channels available) The sub-FM
7 HD Radio (TM) technology is manufactured under license from iBiquity Digital Corp. U.S. and Foreign Patents. HD Radio(TM) and the HD and HD Radio logos are proprietary trademarks of iBiquityDigital Corp.
04 Comfort and driving pleasure
Audio system
04
142
channels will be displayed as 93.9 – 2WNYC, 93.9 - 3 WNYC, etc.
• Reception coverage area: Due to currentIBOC transmitter power limitations, thereception coverage area in digital mode issomewhat more limited than the station'sanalogue coverage area. Please be awarethat as with any radio broadcast technol-ogy, terrain, time of day, foliage level andbuilding location can have positive or neg-ative effects on radio reception.
• Analogue to digital/digital to analogue
blending: Analogue to digital blending willoccur as the signal strength reaches a pre-set threshold in the receiver. This will benoticeable in fringe areas (areas with weakreception) and is normal.
NOTE
There may be a noticeable difference insound quality when a change from analogueto digital or digital to analogue occurs, suchas:
• Volume increase or decrease
• Equalizer settings, i.e., Bass/ Midrange/Treble cut or boost
• Time alignment (Digital program mate-rial in extreme cases can be as much as8 seconds behind the analogue). Thiswill noticeable as a "stuttering" effect.
The above items are dependant on thebroadcaster's equipment settings and donot indicate a fault in the vehicle's radioreceiver or antenna systems.
Switching HD on or off
The factory setting for HD radio is on. However,when driving through areas with weak HD sig-nals (fringe areas), you may experience that theradio repeatedly switches between analogue/digital and digital/analogue reception. If thishappens, it may be desirable to switch HD off.To do so:
1. Be sure the audio system is switched onand in AM or FM mode.
2. Press MENU in the center console controlpanel.
3. Press ENTER to turn HD off (the X will dis-appear from the box on the display screen).
This will disable the radio's capability to receivedigital broadcasts but it will continue to func-tion as a conventional (analogue) AM/FMreceiver. Please note that when HD is switchedoff, it will not be possible to tune to sub-chan-nels (see the following section for a moredetailed explanation of sub-channels).
Repeat steps 2 and 3 above to reactivate HD(an X will appear in the box on the displayscreen).
Sub-channels
Example of an HD Radio station with sub-channels
In many cases, a main HD Radio station (FMwavebands only) will also have sub-channelsoffering additional types of programming ormusic.
04 Comfort and driving pleasure
Audio system
04
��
* Option/accessory, for more information, see Introduction. 143
In such cases, the “>” symbol will be displayedto the left of the frequency number and a num-ber will be displayed to the right of the fre-quency number indicating that the currentlytuned frequency has at least one sub-channel.The "2" in the illustration indicates that you arecurrently listening to the first sub-channel onfrequency 93.9.
Selecting sub-channels
To listen to a station's sub-channel(s), pressthe right arrow key on the center console or onthe steering wheel keypad. To go back to themain channel, press the left arrow key. To goto subchannel 2 (if available), press the rightarrow key.
If you are currently tuned to a frequency's mainchannel, pressing the left arrow key will tune tothe next lower radio frequency.
NOTE
• When the radio has gone into HD mode,it may take several seconds before the">" symbol (if the current frequency hasany sub-channels) is displayed to theright of the frequency. Pressing thearrow keys before the number is dis-played will cause the radio to tune to thenext available radio station, not to thecurrent station's sub-channels.
• When you are no longer in broadcastingrange of the currently tuned sub-chan-
nel, No HD reception will be dis-played. The radio will then be mutedand it will be necessary to tune to orsearch for a new radio station.
Sub-channels can also be stored as presets,see page 138 for information on storing sta-tions.
If you press a sub-channel's preset button, itmay take up to 6 seconds before the channelbecomes audible. If you press this button whileyou are out of digital range of the transmitter,No HD reception will be displayed.
Sirius satellite radio*
Listening to satellite radio
The Sirius satellite system consists of a numberof high elevation satellites in geosynchronousorbit.
NOTE
• The digital signals from the Sirius satel-lites are line-of-sight, which means thatphysical obstructions such as bridges,tunnels, etc, may temporarily interferewith signal reception.
• Avoid any obstructions, such as metal-lic objects transported on roof racks orin a ski box, or other antennas that mayimpede signals from the SIRIUS satel-lites.
Selecting Sirius radio mode
1. Press Power to switch on the audio sys-tem (see page 136 and see page 137 forinformation on the standard audio andradio functions).
2. Press the MODE button repeatedly untilSirius 1 or 2 is displayed.
Activating Sirius radio
1. Tune to a satellite channel that has noaudio, which means that the channel isunsubscribed and the text "Call 888-539-
04 Comfort and driving pleasure
Audio system
04
144
SIRIUS TO SUBSCRIBE" is displayed (seealso "Selecting a channel".
2. Call Sirius at 1-888-539-SIRIUS (7474).
3. When asked for the Sirius ID number pressAUTO to display this number. It is alsopossible to retrieve the Sirius ID from themenu.
4. Updating subscription will be displayedwhile the subscription is being updated,after which the display will return to thenormal view.
SIRIUS ID
The SIRIUS ID is required when contacting theSirius Call Center. It is used to activate youraccount and when making any account trans-actions. The SIRIUS ID is sometimes referredto as the Electronic Serial Number (ESN).
Selecting a channel category
1. Select Sirius radio mode as describedabove.
2. Press ENTER.
3. Use the up/down arrow keys to scrollthrough the list of categories.
4. Press ENTER or the right arrow key toselect a category.> The first channel in the selected cate-
gory will then be played.
NOTE
• The category ALL is default, which ena-bles you to scroll through the entire listof available satellite channels.
• The channel categories are automati-cally updated several times a year. Thistakes approximately two minutes andwill interrupt normal broadcasting. Amessage will be displayed while updat-ing is in progress. Information on chan-nel or feature updates is available atwww.sirius.com.
Selecting a channel
There are three ways of tuning in a channel:
• Using the left and right arrow keys
• By turning the tuning control
• Through direct channel entry.
NOTE
• The numbers of skipped or lockedchannels will not be displayed.
• If a channel is locked, the access codemust be entered before the channel canbe selected. See "Unlocking a channel"on page 146.
Direct channel entry
The Sirius satellite channels are in numericalorder throughout all of the categories. Toaccess a channel directly:
1. Press MENU and scroll to Direct channel
entry.
2. Use the numerical keypad to enter thechannel's number.
3. Press ENTER. The radio will tune to thischannel, even if it belongs to a categoryother than the currently selected one.
Scanning
SCAN automatically searches through the listof satellite channels. The search will only becarried out in the selected category, seepage 137 for more detailed information.
Storing a channel
A total of 20 satellite channels can be stored;10 channels each for Sirius 1 and 2, seepage 138 for detailed information on storingchannels.
• A long press on one of the number keysstores the currently tuned channel on thatkey.
• A short press on a number key while theradio is in Sirius 1or 2 mode will tune to thepreset satellite channel stored on that but-ton, regardless of the currently selectedchannel category.
04 Comfort and driving pleasure
Audio system
04
��
145
Song Seek and Song Memory
The Song seek and Song memory functionsprovide both audio and visual notification whenSirius is broadcasting your favorite songs.Song seek enables you to store the name ofthe song for future advance notification whenthat song is being played. The Song memory
feature makes it possible to view all of the cur-rent songs that are stored in memory.
Song memory
Up to ten songs can be saved in the system'smemory.
1. Press MENU.
2. Scroll to Add song to song memory andfollow the instructions shown in the dis-play.
If a new song is selected when the memory isfull, you will be prompted to press ENTER todelete the last song on the list.
NOTE
The remaining songs in the list will movedown one position, and the newly addedsong will be placed at the top of the list.
Song seek
When a satellite radio channel plays one of thesongs stored in the song memory, the listener
will be alerted by a text message and an audi-ble signal.
Press ENTER to listen to the song or EXIT tocancel.
To activate/deactivate the song seek function:
1. Press MENU
2. Scroll to Song seek
3. Press ENTER to activate or deactivate thefunction.
NOTE
When the song has ended, the radio willremain tuned to the channel on which thesong was played.
Radio text
The text that is displayed about the song thatis currently playing can be changed. Use theAUTO button or the menu to display the Artist,Title, Composer, or switch radio text off.
Advanced Sirius settings
This menu function enables you to make set-tings on certain Sirius satellite radio functions.To access this menu:
1. Press MENU.
2. Scroll to the Sirius menu.
3. Select Advanced Sirius settings….
WARNING
Settings should be made when the vehicleis at a standstill.
The following settings can be made in the Sir-ius menu:
• The list of saved songs can be displayed
• Channel skip settings can be made
• Channel lock settings can be made
• The channel access code can be displayedor changed
• Your Sirius ID can be displayed
Skip options
This function is used to remove a channel fromthe list of available channels.
Skipping a channel
1. Select Channel skip list and pressENTER.
04 Comfort and driving pleasure
Audio system
04
146
2. Select a category in the list and pressENTER.
3. Skip channels in the list presented bypressing ENTER or right arrow key.
Unskip all channels
This permanently removes all channels fromthe skip list and makes them available forselection.
Temp. unskip all ch.
This function will temporarily unskip all chan-nels and make them available for selection. Thechannels remain on the skip list and will againbe skipped the next time the ignition isswitched on.
Channel lock
Access to specific channels can be restricted(locked). A locked channel will not provideaudio, song titles, or artist information.
NOTE
All channels are initially unlocked.
Locking a channel:
1. Select Sirius ID in the menu and selectLock options and press ENTER.
2. Select Channel lock list and pressENTER
3. Enter the channel access code8 and pressENTER.
4. Select a category in the list and pressENTER.
5. Lock channels in the list presented bypressing ENTER or right arrow.
The channel is now locked and a checked boxwill be displayed to indicate this. It will be nec-essary to enter the channel access code8 inorder to listen to a locked channel.
Unlocking a channel
A channel's access code8 is required to unlocka channel.
Unlock all channels
This permanently removes all channels fromthe locked list and makes them available forselection.
Temp. unlock all ch.
This function will temporarily unlock all chan-nels and make them available for selection. Thechannels remain on the locked list and willagain be locked the next time the ignition isswitched on.
CHANGE CODE
This function makes it possible to change thechannel access code. The default code is0000.
To change the code:
1. Select Change code and press ENTER.
2. Enter the current code and press ENTER.
3. Enter the new code and press ENTER.
4. Confirm the new code and press ENTER.
If an incorrect code is entered, the textIncorrect code is displayed.
If you have forgotten the access code:
1. Select Sirius ID in the Sirius settings menuand press ENTER.
2. Press and hold the ENTER button for2 seconds.
3. The current code will be displayed.
Your Volvo retailer can also provide you withassistance.
SIRIUS ID
This function displays the 12-digit Sirius acti-vation ID.
8 The default code is 0000. If you have changed the code and forgotten it, see the section "If you have forgotten the access code."
04 Comfort and driving pleasure
Audio system
04
��
* Option/accessory, for more information, see Introduction. 147
CD functions
Center console, controls for CD functions
CD insert and eject
CD slot
Navigation button for changing CD tracks
Fast-back and change CD track
CD changer* position selection
Scan CD
Playing a CD (CD player9)
If a music CD is in the player when CD ispressed, it will be played automatically. Other-wise, insert a disc and press CD.
Playing a CD (CD changer)
If a CD position with a music CD is alreadyselected when CD is pressed, it will be playedautomatically. Otherwise select a disc with thenumber buttons 1 – 6 or / on the naviga-tion button.
Insert a CD (CD changer)
1. Select an empty position with the numberbuttons 1 – 6 or / on the navigationbutton.> An empty position is marked on the dis-
play. The text Insert disc shows that anew disc can be inserted. The CDchanger can hold up to six CDs.
2. Insert a CD in the CD changer slot.
Disc eject
For reasons of traffic safety, an ejected CDmust be removed within 12 seconds or it willbe automatically drawn back into the slot andthe CD player will enter pause mode. Press theCD button to restart the disc.
Eject individual discs by pressing the eject but-ton.
Eject all discs with a long press on the ejectbutton. The entire magazine is emptied disc bydisc.
NOTE
The Eject all function can only be used whilethe vehicle is at a standstill and will be can-celled if the vehicle begins to move.
Pause
When the audio system volume is turned offcompletely, the CD player will pause and willresume playing when the volume is turned upagain.
Audio files10
In addition to playing normal music CDs, theCD player/changer can also play discs con-taining files in mp3 or wma format.
NOTE
Some copy protected sound files may notbe read by the player.
When a CD containing sound files is insertedinto the player the disc's directory structure isscanned before the CD begins playing. The
9 Certain markets only.10High Performance and Premium Sound only
04 Comfort and driving pleasure
Audio system
04
148
length of time that this takes depends on thequality of the disc.
Navigating the disc and playing tracks
If a disc containing sound files is inside the CDplayer, press ENTER to display the disc'sdirectory structure. The directory structure isnavigated in the same way as the audio sys-tem's menu structure. Sound files have the
symbol and directories have the symbol. Press ENTER to play a selected folderor a file.
When the music file has been played, theplayer will continue to play the rest of the filesin the current folder. When all of the files in thefolder have been played, the player will auto-matically go to the next folder and play the filesin it.
Fast-forward/change CD tracks and
sound files
Short presses / on the navigation buttonare used to scroll between CD tracks/soundfiles. Long presses are used to search withinCD tracks/sound files. TUNING (or the steeringwheel keypad) can also be used for this pur-pose.
Scan CD
This function plays the first ten seconds ofeach CD track/sound file. Press SCAN to acti-vate. Interrupt with EXIT or SCAN to continueplaying the current CD track/sound file.
Random
This function plays the tracks in random order(shuffle). The random CD tracks/sound filescan be scrolled through in the normal way.
NOTE
It is only possible to scroll between randomCD tracks on the current disc.
Different messages are displayed dependingon which random function has been selected:
• Random means that the tracks from onlyone music CD are played
• RND ALL means that all tracks on allmusic CDs in the optional CD changer areplayed.
• Folder means that the sound files in adirectory on the current CD are played.
CD player
If a normal music CD is being played, activate/deactivate under Random.
If a disc with sound files is being played, acti-vate/deactivate under Random Folder.
CD changer
If a normal music CD is being played underRandom Single disc or Random
All discs. The All discs feature only appliesto the music CDs in the changer.
If a CD with sound files is being played, acti-vate/deactivate instead under Random
Folder. If you select another CD the function isdeactivated.
Disc text
If title information is stored on a music CD it canbe shown on the display11. Activate/deactivatein CD mode under CD settings Disc
text.
11Only applies to the CD changer.
04 Comfort and driving pleasure
Bluetooth® hands-free connection
04
��
149
Introduction
System overview
Cell phone
Location of the microphone
Steering wheel keypad
Center console control panel and display
Bluetooth® hands-free
This feature makes it possible to set up a wire-less connection between a Bluetooth -ena-bled cell phone and the vehicle’s audio system.This enables the audio system to function as ahands-free connection and allows you toremote-control a number of the phone’s func-tions. The microphone used by this system islocated in the ceiling console (2). The buttons
and other controls on the cell phone canalways be used regardless of whether or notthe phone is connected to the hands-free sys-tem.
NOTE
Not all cell phones are fully compatible withthe hands-free system. A list of compatiblephones is available at your Volvo retailer orat www.volvocars.us
WARNING
Never use the hands-free feature or anyother device in your vehicle in a way thatdistracts you from the task of driving safely.Distraction can lead to a serious accident.
Bluetooth® functions in the centerconsole control panel
VOLUME – This function is also availableon the steering wheel keypad.
Keys containing letters and numbers fordialing numbers, adding phone bookentries, etc.
PHONE – Press to activate/deactivate theBluetooth® function
Navigation buttons
EXIT – Press to end or defer calls, erasecharacters that have been entered, end anongoing function. This function is alsoavailable on the steering wheel keypad.
ENTER – Answer a call. Press once to dis-play the most recently dialed number. This
04 Comfort and driving pleasure
Bluetooth® hands-free connection
04
150
function is also available on the steeringwheel keypad.
Getting started
Use the controls on steering wheel keypad (3)and in the center console (4) to access, navi-gate and make selections in the hands-freesystem’s menus (see page 149).
Activating/deactivating
A short press on the PHONE button in the cen-ter console activates the hands-free system.The text PHONE will appear at the top of thedisplay to indicate that the audio system is intelephone mode.
The symbol indicates that the hands-freesystem is active.
A long press on the PHONE button deactivatesthe hands-free system and disconnects thecell phone.
Connecting cell phones
The procedure for connecting a cell phone var-ies, depending on the phone itself, and onwhether or not the phone has been previouslyconnected.
If this is the first time the phone is to be con-nected to the hands-free system, proceed asfollows:
Alternative 1–using the vehicle's menus
1. Activate the cell phone’s Bluetooth® func-tion (refer to the phone’s owner’s manual ifnecessary) or go to www.volvocars.com
2. Activate the vehicle’s Bluetooth® hands-free system by briefly pressing thePHONE button.> Add phone will be displayed. If one or
more cell phones are already registeredin the system, they will also be dis-played.
3. Select Add phone.> The audio system will search for cell
phones that are in range. This searchtakes approximately 30 seconds. Anyphones detected will be displayed withtheir Bluetooth® names. The hands-freesystem’s Bluetooth® name will appearin the cell phone’s display as My Car.
4. Select one of the cell phones shown in theaudio system’s (center console) display.
5. Using the cell phone’s keypad, enter thedigits shown in the audio system’s display.
Alternative 2–using the cell phone’s menus
1. Activate the hands-free system by brieflypressing the PHONE button in the centerconsole. If there is a cell phone connected,
disconnect it from the hands-free system(by pressing PHONE in the center consolefor several seconds).
2. Perform a search using the cell phone’sBluetooth® function (consult the cellphone’s owner’s manual if necessary).
3. Select My Car in the list of devices shownin the cell phone’s display.
4. When prompted, enter the PIN code 1234in the cell phone.
5. Connect to My Car from the cell phone.
The cell phone will be registered and will beconnected automatically to the audio systemwhile the text Synchronizing is displayed. Formore information on synchronizing a cellphone, see page 152.
When a connection has been established, the symbol and the cell phone’s Bluetooth®
name will be displayed. The cell phone cannow be controlled from the audio system.
Making a call
1. Ensure thatPHONE is shown at the top ofthe center console display and that the
symbol is visible (by pressing briefly onPHONE on the center console).
2. Dial the desired phone number or use thephone book (see page 152).
04 Comfort and driving pleasure
Bluetooth® hands-free connection
04
��
151
3. Press ENTER.
End the call by pressing EXIT.
Disconnecting the cell phone
The cell phone is automatically disconnectedfrom the audio system if it is moved out ofrange. For more information about connec-tions, see page 150.
The cell phone can be manually disconnectedfrom the hands-free system by pressingPHONE. The hands-free system is also deac-tivated when the ignition is switched off (or ifthe driver’s door is opened on vehicles equip-ped with the optional keyless drive).
When the cell phone is disconnected from thehands-free system, a call in progress can becontinued using the cell phone’s own speakerand microphone.
NOTE
Certain cell phones may require confirma-tion from the phone’s keypad when a call istransferred from hands-free to the cellphone.
Handling calls
Incoming calls
� Press ENTER to answer a call, even if theaudio system is currently in e.g., CD or FMmode.
� Press EXIT to defer a call.
Automatic answer
This function means that incoming calls will beanswered automatically. Activate or deactivatethe function in the menu system under Phone
settings Call options Automatic
answer.
Call settings
While a call is in progress, press MENU orENTER on the center console to access thefollowing functions:
• Mute microphone–mute the audio sys-tem’s microphone.
• Transfer call to mobile–transfer the callfrom hands-free to the cell phone.
• Phone book–this feature enables you tosearch for a stored telephone number.
NOTE
• On certain cell phones, the connectionis broken when the mute function isused, which is normal. If this happens,the hands-free system will prompt youto reconnect.
• A new call cannot be initiated whileanother call is in progress.
Sound settings
Call volume
Call volume can be adjusted when the hands-free system is activated. Use the buttons in thesteering wheel keypad or the audio system’svolume control.
Audio system volume
While a phone call is in progress, volume forthe audio system can be adjusted in the normalway with the audio system's volume control. Inorder to adjust volume during a phone call, theaudio system must be switched to one of theother modes (FM, CD, etc).
Audio system sound can be automaticallymuted when a phone call is received in Phone
settings Sounds and volume
Mute radio and adjust the volume with the / keys on the center console.
04 Comfort and driving pleasure
Bluetooth® hands-free connection
04
152
Ringing volume
Go to Phone settings Sounds and
volume Ring volume and adjust the vol-ume with the / keys on the center con-sole.
Ringing tones
The hands-free system’s integrated ringingtones can be selected in Phone settings
Sounds and volume Ring signals
Ring signal 1, etc.
NOTE
The connected cell phone’s ring tone is notswitched off when one of the hands-freesystem's ringing tones is used.
If you prefer to use the connected cell phone’sring tone1, go to Phone settings
Sounds and volume Ring signals
Use mobile phone signal
More information about registeringand connecting cell phones
A maximum of 5 cell phones can be registeredin the hands-free system. Registration onlyneeds to be done once for each phone. Afterregistration, the cell phone no longer needs tobe in sight or searchable. Only one cell phonecan be connected to hands-free at a time.Phones can be unregistered in Bluetooth
Remove phone
Automatic connection
When the hands-free system is active and themost recently connected cell phone is withinrange, it is detected automatically. When theaudio system searches for the most recentlyconnected phone, this phone’s name appearsin the display. To manually connect a differentcell phone, press EXIT.
Manual connection
To connect a phone other than the one thatwas most recently connected or to switchbetween cell phones that are already regis-tered in the hands-free system:
1. Put the audio system in telephone mode.2. Press PHONE in the center console and
select one of the phones on the list.
A connection can also be established in themenu system under Bluetooth Connect
phone or Change phone.
Phone book
In order to use the hands-free system’s phonebook (list of contacts), PHONE must be dis-played at the top of the center console displayand the symbol must be visible.
The audio system stores a copy of the phonebook of each registered cell phone. The phonebook is automatically copied each time aphone is connected. This function can be acti-vated in Phone settings Synchronize
phone book. Searches for contacts are onlymade in the phone book of the currently con-nected cell phone.
NOTE
If a particular cell phone does not supportcopying of the phone book, List is emptywill be displayed when copying has beencompleted.
If the phone book contains information aboutsomeone who is trying to call you, this infor-mation will be shown in the display.
1 Not supported by all cell phones.
04 Comfort and driving pleasure
Bluetooth® hands-free connection
04
��
153
Searching for contacts
The easiest way to search for a contact in thephone book is to press and hold any of thebuttons 2–9. This starts a search based on thefirst letter on the button that has been pressed.
The phone book can also be accessed bypressing the navigation buttons / on thecenter console or by pressing / on thesteering wheel keypad. A search can also bemade in the phone book’s search menu inPhone book Search:
1. Enter the first letter of the contact’s nameand press ENTER or simply press ENTER.
2. Select the desired contact and pressENTER to make a call to that person.
Voice mail number
The phone number to your voice mail can bechanged in the menu Phone settings
Call options Voice mail number. If nonumber has been stored, this menu can beaccessed by a prolonged press on button 1.Once a phone number has been stored, pressand hold 1 to dial this number.
Call lists
Lists of calls in a particular cell phone are cop-ied to the hands-free system each time thatphone is connected. These lists are then upda-
ted while the phone is connected. PressENTER to show the most recently dialed num-bers. Other call lists can be found under Call
register.
NOTE
Certain cell phones display the list of themost recently dialed numbers in reverseorder.
Entering text
Text is entered by using the number buttons inthe center console. Press a button once toenter the first letter on the button, twice to enterthe second letter, etc. Continue to press thebutton to display other characters.
Press EXIT briefly to erase a character. Pressand hold EXIT to erase all of the characters thathave been entered. Use the / buttons onthe center console to navigate among the char-acters.
Button Function
Space .1-? ! , : " ' ( )
A B C 2 Ä Å À Æ Ç
D E F 3 È É
Button Function
G H I 4 Ì
J K L 5
M N O 6 Ñ Ö Ò Ø
P Q R S 7 ß
T U V 8 Ü Ù
W X Y Z 9
Press briefly if two characters areto be entered in succession fromthe same button.
+ 0 @ * # & $ £ / %
Shift between uppercase andlowercase letters
04 Comfort and driving pleasure
Bluetooth® hands-free connection
04
154
Bluetooth® menus
1. Missed calls
2. Received calls
3 Dialed calls
4. Phone book
4.1. Search
4.2. Copy fr. mobile phone
5. Bluetooth...
5.1. Change phone
5.2. Connect phone
5.3. Disconnect phone
5.4. Connect fr. mobile phone
6. Phone settings
6.1. Call options
6.1.2. Automatic answer
6.1.3. Voice mail number
6.2. Sounds and volume
6.3. IDIS
6.4. Synchronize phone book
04 Comfort and driving pleasure
Trip computer
04
��
155
Introduction
G02
2909
Information display and controls
READ–press to acknowledge/confirm/erase a message)
Thumb wheel (used to scroll among the tripcomputer menus)
RESET–resets certain functions
To scroll through trip computer information,move the thumb wheel up or down. Continueturning to return to the starting point.
Functions
NOTE
If a warning message appears while you areusing the trip computer, this message mustbe acknowledged in order to return to thetrip computer function. Acknowledge amessage by pressing READ.
To change the unit of measure specified fordistance and speed, contact an authorizedVolvo workshop.
Average speed
The system calculates the average speed fromthe last resetting. Reset using RESET.
Current speed in mph (Canadian models
only)
This function provides the driver with an instan-taneous conversion of the car's current speedfrom km/h to mph.
Current speed in km/h (U.S. models only)
This function provides the driver with an instan-taneous conversion of the car's current speedfrom mph to km/h.
Current fuel consumption
(Instantaneous)
Current fuel consumption is calculated everysecond. The information on the display is
updated every few seconds. When the vehicleis stationary, "----" appears on the display.
Average fuel consumption
The average fuel consumption since the lastreset. Reset using RESET.
Driving distance on current fuel reserve
This function shows the approximate distancethat can be driven on the fuel remaining in thetank. The calculation is based on average fuelconsumption during the last 20 miles (30 km)of driving and the amount of fuel remaining inthe tank when the reading was taken. When themessage ---- miles to empty tank appears inthe display, refuel as soon as possible.
NOTE
The actual distance that can be driven onthe usable fuel remaining in the tank may beinfluenced by a change in driving style.
See also page 202 for information on drivingeconomically.
Resetting
1. Select --- mph average speed or --.-mpg average.
2. Press and hold RESET for approx. 1 sec-ond to reset the selected function. IfRESET is kept depressed for at 3 three
04 Comfort and driving pleasure
Trip computer
04
156
seconds, Average speed and Average fuelconsumption are reset simultaneously.
04 Comfort and driving pleasure
Stability system
04
��
157
Introduction
The Dynamic Stability and Traction Controlsystem (DSTC) consists of a number of func-tions designed help reduce wheel spin, coun-teract skidding, and to generally help improvedirectional stability.
CAUTION
A pulsating sound will be audible when thesystem is actively operating and is normal.
Traction control (TC)
This function is designed to help reduce wheelspin by transferring power from a drive wheelthat begins to lose traction to the wheel on theopposite side of the vehicle (on the same axle).
TC is most active at low speeds.
This is one of DSTC's permanent functions andcannot be switched off.
Active Yaw Control (AYC)
This function helps maintain directional stabil-ity, for example when cornering, by brakingone or more of the wheels if the vehicle showsa tendency to skid or slide laterally.
This is one of DSTC's permanent functions andcannot be switched off.
Spin control (SC)
The spin control function is designed to helpprevent the drive wheels from spinning whilethe vehicle is accelerating.
Under certain circumstances, such as whendriving with snow chains, or driving in deepsnow or loose sand, it may be advisable totemporarily switch off this function for maxi-mum tractive force.
WARNING
The car's handling and stability characteris-tics will be altered if the spin control functionhas been disabled.
Operation
G02
1409
Temporarily switching off Spin control
1. Turn the thumbwheel (1) until the DSTC
menu is shown.
2. Hold down the RESET button (2) to togglebetween DSTC SPIN CONTROL ON/
OFF.
Symbols in the instrument panel
If the symbols and are displayedat the same time, read the message in theinformation display.
If the symbol appears alone, it mayappear as follows:
• If the symbol flashes, this indicates that thestability system is actively functioning tohelp counteract wheel spin and/or a skid.
• If the symbol remains on for approximately2 seconds after the engine has beenstarted, this indicates that the system isperforming a self-diagnostic test.
WARNING
The stability system is intended to helpimprove driving safety. It supplements, butcan never replace, the driver's judgmentand responsibility when operating the vehi-cle. Speed and driving style should alwaysbe adapted to traffic and road conditions.
04 Comfort and driving pleasure
Stability system
04
158
Messages in the information display
DSTC Temporarily OFF – system functionhas been temporarily reduced due to highbrake disc temperature. The function is acti-vated automatically when the brakes havecooled.
DSTC Service required – the system hasbeen disabled due to a fault. If this occurs:
1. Stop the vehicle in a safe place and turn offthe engine.
2. Restart the engine.
If the message remains when the engine isrestarted, drive to an authorized Volvo work-shop to have the system inspected.
Symbols in the instrument panel
If the symbols and are displayedat the same time, read the message in theinformation display.
If the symbol appears alone, it mayappear as follows:
• If the symbol flashes, this indicates that thestability system is actively functioning tohelp counteract wheel spin and/or a skid.
• If the symbol remains on for approximately2 seconds after the engine has beenstarted, this indicates that the system isperforming a self-diagnostic test.
04 Comfort and driving pleasure
Active chassis system–Four C*
04
* Option/accessory, for more information, see Introduction. 159
Active chassis (Four C)
Active chassis, Four-C (Continuously Con-trolled Chassis Concept)1, regulates the cha-racteristics of the shock absorbers so that thecar's driving characteristics can be adjusted.There are three settings: Comfort, Sport andAdvanced.
NOTE
This system is available on Canadian mod-els only.
Comfort
Comfort mode offers a somewhat softer rideand the transmission shifts gears at lower rpm.This mode is particularly suitable for long-dis-tance highway driving. The indicator light in thebutton will be on when this mode is selected.
Sport
In this mode, the vehicle's body sway isreduced during cornering and steeringresponse is more immediate. The transmissionshifts up at higher rpm for sportier driving. Theindicator light in the button will be on to indi-cate that Sport mode has been selected.
Advanced
In this mode, body sway in curves is minimaland steering response is very direct. Gear shift-
ing is done at high rpm in each gear fordynamic and active driving.
Operation
Chassis settings
Use the buttons in the center console tochange setting. The setting in use when theengine is switched off is activated the next timethe engine is started.
Speed-dependent steering force*
Steering force increases with the speed of thevehicle to give the driver enhanced sensitivity.At low speed the vehicle is easy to steer inorder to facilitate parking, etc.
Steering force can be changed under Car
settings Steering force level. For adescription of the menu system, seepage 124.
NOTE
This steering force level menu function can-not be accessed when the vehicle is inmotion.
1 Available as an option on Canadian models only
04 Comfort and driving pleasure
Cruise control
04
160
Operation
G02
2910
Steering wheel-mounted controls and display
Standby mode
Resume set speed
Deactivating
Activate/set speed
Set speed indicator (parentheses indicatestandby mode)
Engaging the cruise control function
Before a speed can be set, the cruise controlsystem must be engaged (put in standbymode).
� Press the CRUISE button (1).
> The symbol illuminates and the text(---) mph (5) indicates that cruise con-trol is in standby mode.
NOTE
This does not set the vehicle's speed.
Setting a speed
Use the or buttons set the vehicle's cur-rent speed. The set speed is shown in the dis-play.
NOTE
Cruise control cannot be engaged atspeeds below 20 mph (30 km/h).
Adjusting the set speed
After a speed has been set, it can be increasedor decreased by using the or buttons.
1. Press and hold down or until thevehicle reaches the desired speed.> This will become the set speed when the
button is released.
2. Press or for approximately a halfsecond and release the button to increaseor decrease vehicle speed by approxi-mately 1 mph (1.6 km/h).
NOTE
• A temporary increase in speed bypressing the accelerator pedal, for lessthan 1 minute (e.g. when passinganother car), does not affect the currentcruise control setting. The vehicle willautomatically return to the previouslyset speed when the accelerator pedal isreleased.
• If one of the cruise control buttons iskept depressed for more than approx.1 minute cruise control is disengaged.The engine must then be switched off inorder to reset cruise control.
Automatic deactivation
Cruise control is automatically deactivatedtemporarily if one of the following occurs:
• If the speed drops below approximately20 mph (30 km/h).
• When the brake pedal is depressed.
• If the gear selector is moved to position N.
• During wheel spin or wheel lock-up.
• If the vehicle's speed is increased by usingthe accelerator pedal for more than1 minute.
The currently set speed will be saved in thesystem's memory.
04 Comfort and driving pleasure
Cruise control
04
161
Temporary deactivation
The driver can temporarily deactivate cruisecontrol by pressing 0. The saved speed isshown in brackets in the information display.
Resume set speed
If cruise control has been deactivated tempo-rarily, it can be reactivated by pressing . Thevehicle's speed returns to the most recently setspeed.
WARNING
There may be a significant increase in speedafter the button has been pressed.
Deactivation
Cruise control is disengaged by pressingCRUISE, or by switching off the engine. Theset speed is cleared.
WARNING
Cruise control should not be used in heavytraffic or when driving on wet or slipperyroads. Cruise control may not maintain setspeed on steep downgrades.
04 Comfort and driving pleasure
Adaptive Cruise Control (ACC)*
04
162 * Option/accessory, for more information, see Introduction.
Introduction
Adaptive Cruise Control (ACC) is an optionalsystem designed to assist the driver by main-taining a set speed or a set time interval to thevehicle ahead. It is primarily intended for useon long straight roads in steady traffic, such ason highways and other main roads.
When the driver has set the desired speed andthe time interval to the vehicle ahead, ACCfunctions as follows:
• If there are no other vehicles in the laneahead of you, your vehicle will travel at theset speed.
• If ACC's radar sensor detects a slowermoving vehicle in the lane ahead, the sys-tem will adapt your vehicle's speed to helpmaintain the set time interval to the vehicleahead. When there are no longer slowermoving vehicles ahead, your vehicle willaccelerate to resume the set speed.
If ACC is switched off completely or in standbymode and your vehicle comes too close toanother vehicle ahead, the driver will bewarned by the Distance Alert system (seepage 171).
WARNING
• Adaptive Cruise Control cannot coverall driving situations and traffic, weatherand road conditions. The "Function"section provides information about lim-itations that the driver must be aware ofbefore using this feature.
• This system is designed to be a supple-mentary driving aid. It is not, however,intended to replace the driver's atten-tion and judgement. The driver isresponsible for maintaining a safe dis-tance and speed and must intervene ifAdaptive Cruise Control does not main-tain a suitable speed or suitable dis-tance to the vehicle ahead.
• Maintenance of ACC components mayonly be performed by a trained andqualified Volvo technician.
Function
G02
1412
Function overview
Warning light, braking by driver required
Controls in steering wheel
Radar sensor in front grille
Adaptive Cruise Control consists of:
• A cruise control system to maintain a setspeed
• A system to maintain a set distance to thevehicle ahead, which is expressed as atime interval. For example, you can chooseto remain approximately 2 seconds behindthe vehicle ahead. The actual distancerequired to maintain a 2-second intervalwill vary according the speed of the vehi-cles.
04 Comfort and driving pleasure
Adaptive Cruise Control (ACC)*
04
��
* Option/accessory, for more information, see Introduction. 163
WARNING
• Adaptive Cruise Control is not a colli-sion avoidance system. The driver isalways responsible for applying thebrakes if the system does not detectanother vehicle.
• Adaptive Cruise Control does not reactto people or animals, or small vehiclessuch as bicycles and motorcycles. Italso does not react to slow moving,parked or approaching vehicles, or sta-tionary objects.
• Do not use Adaptive Cruise Control indemanding driving conditions such ascity driving or other heavy traffic situa-tions, in slippery conditions, when thereis a great deal of water or slush on theroad, during heavy rain or snow, in poorvisibility, on winding roads or on high-way on- or off-ramps.
The distance to the vehicle ahead (in the samelane) is monitored by a radar sensor. Your vehi-cle's speed is regulated by accelerating andbraking. The brakes may emit a sound whenthey are being modulated by the adaptivecruise control system. This is normal.
WARNING
The brake pedal moves when the adaptivecruise control system modulates thebrakes. Do not rest your foot under thebrake pedal.
The ACC system is designed to smoothly reg-ulate speed. However, the driver must applythe brakes in situations that require immediatebraking. This applies when there are great dif-ferences in speed between vehicles, or if thevehicle ahead brakes suddenly.
WARNING
Due to limitations in the radar sensor, brak-ing may occur unexpectedly or not at all,see page 166.
Adaptive Cruise Control can only be put inactive mode at speeds above 20 mph(30 km/h). If speed falls below 20 mph(30 km/h) or if engine speed (rpm) becomes toolow, ACC disengages (goes into standbymode) and will no longer modulate the brakes.
WARNING
When Adaptive Cruise Control is in standbymode or is switched off completely, thebrakes will not be modulated automatically.The driver must assume full control over thevehicle.
Warning light—driver braking required
Adaptive Cruise Control can exert brake forcethat is equivalent to approximately 25% of thevehicle's total braking capacity. In situationsrequiring more brake force than ACC can pro-vide and if the driver does not apply the brakes,an audible signal from the Collision Warningsystem will sound and warning light will illumi-nate (see page 174) in the windshield to alertthe driver to react.
NOTE
Strong sunlight, reflections, extreme lightcontrasts, the use of sunglasses, or if thedriver is not looking straight ahead maymake the visual warning signal in the wind-shield difficult to see.
04 Comfort and driving pleasure
Adaptive Cruise Control (ACC)*
04
164 * Option/accessory, for more information, see Introduction.
WARNING
Adaptive Cruise Control only warns of vehi-cles detected by the radar sensor, seepage 166. In some cases there may be nowarning or the warning may be delayed. Thedriver should always apply the brakes whennecessary.
Steep inclines and/or heavy loads
ACC is primarily intended for use on fairly levelroads. The system may have difficulty main-taining the correct distance to a vehicle aheadon steep inclines, if the vehicle is carrying aheavy load or is towing a trailer. In these situa-tions, the driver should always be prepared toapply the brakes if necessary.
Operation
Controls and display
Resume previous settings, increase speed
Standby mode on/off1
Set time interval
Put in active mode and set a speed
Set speed (parentheses indicate standbymode)
Time interval while it is being set
Time interval after it has been set
Putting ACC in standby mode
Before ACC can be used to regulate speedand/or the distance to a vehicle ahead, it mustfirst be put in standby mode.
To do so:
Press .
The symbol appears in the display andparentheses (---) indicate that ACC is instandby mode.
Setting a speed
Once ACC has been put in standby mode, usethe or buttons to store (set) the vehicle'scurrent speed. This puts the system in activemode. The set speed, for example 55 mph, isshown in the display.
NOTE
Adaptive cruise control cannot be put inactive mode at speeds below 20 mph(30 km/h).
1 The driver's door must be closed and the driver's seat belt must be fastened before ACC can be put in standby mode
04 Comfort and driving pleasure
Adaptive Cruise Control (ACC)*
04
��
* Option/accessory, for more information, see Introduction. 165
When the symbol on theleft side of the displaychanges to , the radar sen-sor has detected anothervehicle ahead. The distance
to a vehicle ahead is only
regulated when this symbol ( ) is illumi-
nated.
Changing the set speed
After a speed has been set, it can be increasedor decreased by using the or buttons.
When the system is in active mode, the but-ton has the same function as , but results ina smaller increase in speed.
NOTE
• If one of the Adaptive Cruise Controlbuttons is pressed for more thanapproximately one minute, ACC will bedeactivated. The engine must then beswitched off and restarted to reset ACC.
• In some situations Adaptive CruiseControl cannot be put in active mode.Cruise control Unavailable is shownin the display, see page 169.
Setting a time interval
The set time interval to vehicles ahead can beincreased by pressing and decreased bypressing . The current time interval is shownbriefly in the display following adjustment.
Different time intervals can beselected and are shown in thedisplay as 1–5 horizontal bars.The greater the number ofbars, the longer the time inter-val. One bar represents a timeinterval of approximately
1 second; 5 bars is approximately2.5 seconds. At low speeds, when the distanceto the vehicle ahead is short, ACC increasesthe time interval slightly. In order to follow thevehicle ahead as smoothly as possible, ACCallows the time interval to vary considerably incertain situations.
WARNING
• Only use a time interval that is suitablein current traffic conditions.
• A short time interval gives the driver lim-ited reaction time if an unexpected sit-uation occurs in traffic.
The number of bars indicating the selectedtime interval are shown while the setting isbeing made and for several seconds afterward.A smaller version of the symbol is then shownto the right in the display. The same symbol isalso displayed when Distance Alert is in activemode, see page 171 .
Standby mode (temporary deactivation)
Press to temporarily deactivate cruise con-trol (put it in standby mode). The set speed, forexample 55 mph, is then shown in parenthe-ses.
The previously set speed and time interval areresumed by pressing .
WARNING
There may be a significant increase in speedafter the button has been pressed.
When ACC is in active mode, the vehicle’sspeed increases by approximately 1 mph(1 km/h) each additional time is pressed.
04 Comfort and driving pleasure
Adaptive Cruise Control (ACC)*
04
166 * Option/accessory, for more information, see Introduction.
Standby mode due to action by the driver
ACC is temporarily deactivated and put instandby mode:
• when the brakes are applied
• if the gear selector is moved to N
• if the accelerator pedal is depressed formore than 1 minute.
NOTE
If the accelerator pedal is only depressed fora short time, such as when passing anothervehicle, ACC is deactivated temporarily andis reactivated when the pedal is released.
Automatic standby mode
Adaptive cruise control is linked to other sys-tems such as the stability and traction controlsystem (DSTC). If this system is not functioningproperly, adaptive cruise control is automati-cally deactivated and will go into standbymode.
In the event of automatic deactivation, an audi-ble signal will sound and the message Cruise
control Cancelled is shown in the display.The driver must then intervene and adapt thevehicle's speed to the surrounding traffic andregulate the distance to the vehicle ahead.
An automatic switch to standby mode may becaused if:
• the vehicle's speed falls below 20 mph(30 km/h)
• the wheels lose traction
• brake temperature is high
• engine speed (rpm) is too low or too high
• the radar sensor is obstructed by, forexample, wet snow or rain.
Turning ACC off completely
A short press on in standby mode or a longpress in active mode turns ACC off completely.The set speed and time interval are thencleared from the system's memory and cannotbe resumed by pressing .
The radar sensor and its limitations
In addition to being used by ACC, the radarsensor is also used by Distance Alert (seepage 171) and Collision Warning with Auto-brake (see page 174). This sensor is designedto detect cars or larger vehicles driving in thesame direction as your vehicle, in the samelane.
WARNING
Accessories or other objects, such as extraheadlights, must not be installed in front ofthe grille.
Modification of the radar sensor could makeits use illegal.
The radar sensor's capacity to detect vehiclesahead is impeded:
• if the radar sensor is obstructed and can-not detect other vehicles, for example inheavy rain, or if snow or other objects areobscuring the radar sensor.
NOTE
Keep the area in front of the radar sensorclean.
• if the speed of vehicles ahead is signifi-cantly different from your own speed.
04 Comfort and driving pleasure
Adaptive Cruise Control (ACC)*
04
��
* Option/accessory, for more information, see Introduction. 167
Situations where ACC may not function
optimally
WARNING
• The radar sensor has a limited field ofvision. In some situations it may detecta vehicle later than expected or notdetect other vehicles at all.
• If ACC is not functioning properly,cruise control will also be disabled.
G02
1414
Radar sensor's field of vision (gray)
In certain situations, the radar sensor can-not detect vehicles at close quarters, forexample a vehicle that suddenly enters thelane between your vehicle and the one thatthe system has already detected.
Small vehicles, such as motorcycles, orvehicles not driving in the center of the lanemay remain undetected.
In curves, the radar sensor may detect thewrong vehicle or lose a detected vehiclefrom view.
WARNING
• Adaptive Cruise Control cannot coverall driving situations and traffic, weatherand road conditions. The "Function"section provides information about lim-itations that the driver must be aware ofbefore using this feature.
• This system is designed to be a supple-mentary driving aid. It is not, however,intended to replace the driver's atten-tion and judgement. The driver isresponsible for maintaining a safe dis-tance and speed and must intervene ifAdaptive Cruise Control does not main-tain a suitable speed or suitable dis-tance to the vehicle ahead.
• Maintenance of ACC components mayonly be performed by a trained andqualified Volvo technician.
04 Comfort and driving pleasure
Adaptive Cruise Control (ACC)*
04
168 * Option/accessory, for more information, see Introduction.
WARNING
• Adaptive Cruise Control is not a colli-sion avoidance system. The driver isalways responsible for applying thebrakes if the system does not detectanother vehicle.
• Adaptive Cruise Control does not reactto people or animals, or small vehiclessuch as bicycles and motorcycles. Italso does not react to slow moving,parked or approaching vehicles, or sta-tionary objects.
• Do not use Adaptive Cruise Control indemanding driving conditions such ascity driving or other heavy traffic situa-tions, in slippery conditions, when thereis a great deal of water or slush on theroad, during heavy rain or snow, in poorvisibility, on winding roads or on high-way on- or off-ramps.
Fault tracing and actions
If the message Radar blocked See manual isdisplayed, this means that the radar signalsfrom the sensor have been obstructed and thata vehicle ahead cannot be detected.
This, in turn, means that the functions of theACC, Distance Alert, and Collision WarningSystem with Auto-brake will not function.
The table lists possible causes for this mes-sage being displayed, and suitable actions.
Cause Action
The surface of the radar in the grille is dirty or obstructed in some way. Clean the radar surface, or remove the object causing the obstruction.
Heavy rain or snow is interfering with the radar signals. No action possible. Heavy precipitation may affect the function of theradar.
04 Comfort and driving pleasure
Adaptive Cruise Control (ACC)*
04
��
* Option/accessory, for more information, see Introduction. 169
Cause Action
Swirling water or snow from the surface of the road may interfere withthe radar signals.
No action possible. A very wet or snow-covered road surface may affectthe function of the radar.
The surface of the radar is clean but the message remains in the display. Wait a short time. It may take several minutes for the radar to detect thatit is no longer obstructed.
Symbols and messages in the display
Symbol Message Description
- Standby mode or active mode when no other vehicle has been detected.
- Active mode with a detected vehicle to which ACC is adapting speed/distance.
- Time interval while it is being set.
- Time interval after it has been set.
- Turn on DSTC to enable
Cruise
ACC cannot be put in active mode if the stability system DSTC's Spin control is switched off. Seepage 157 for more information.
- Cruise control Cancelled ACC has been automatically switched off.
The driver must regulate the vehicle’s speed/distance to the vehicle ahead.
- Cruise control Unavailable ACC cannot be put in active mode. This may be due to:
• high brake temperature
• the radar sensor is obstructed (by heavy rain, snow, etc.)
04 Comfort and driving pleasure
Adaptive Cruise Control (ACC)*
04
170 * Option/accessory, for more information, see Introduction.
Symbol Message Description
Radar blocked See manual ACC has been temporarily disconnected because the radar is obstructed in some way and cannotdetect other vehicles.
See page 166 for information on the radar sensor’s limitations.
Cruise control Service
required
ACC is not functioning.
Contact a trained and qualified Volvo service technician.
04 Comfort and driving pleasure
Distance Alert*
04
��
* Option/accessory, for more information, see Introduction. 171
Introduction
Distance Alert is part of Adaptive Cruise Con-trol and is a function that provides informationabout the time interval to the vehicle ahead.
Distance Alert is active at speeds aboveapproximately 20 mph (30 km/h). Time intervalinformation is only given for a vehicle that isdriving ahead of your vehicle in the same direc-tion. No information is provided for vehiclesdriving toward you, moving very slowly, or at astandstill.
G017362
A smaller section of the red warning light in thewindshield glows steadily if your vehicle iscloser to the one ahead than the set time inter-val.
NOTE
Distance Alert only monitors distance to thevehicle ahead while Adaptive Cruise Controlis in active mode.
WARNING
Distance Alert only indicates the distance tothe vehicle ahead. It does not affect thespeed of your vehicle.
Operation
Press the button in the center instrument panelto switch this function on or off. The indicatorlight in the button illuminates when the functionis on.
Setting a time interval
Controls and display
Time interval: Increase/decrease
Time interval: On, while it is being set
Time interval: On, after it has been set
Press to increase the interval or todecrease it.
Five different time intervalscan be selected and areshown in the display as 1–5horizontal bars. The greaterthe number of bars, the longerthe time interval. One bar rep-resents approximately
1 second to the vehicle ahead; 5 bars isapproximately 2.5 seconds.
04 Comfort and driving pleasure
Distance Alert*
04
172 * Option/accessory, for more information, see Introduction.
The number of bars indicatingthe selected time interval areshown while the setting isbeing made and for severalseconds afterward. A smallerversion of the symbol is thenshown to the right in the dis-
play. The same symbol is displayed whenAdaptive Cruise Control (ACC) is activated.
NOTE
• The higher your vehicle’s speed, thegreater the distance to the vehicleahead, measured in feet (meters), for agiven time interval.
• The set time interval is also used byAdaptive Cruise Control, see page 164.
WARNING
Only use a time interval that is suitable incurrent traffic conditions.
Limitations
Distance Alert uses the same radar sensorused by Adaptive Cruise Control and the Col-lision Warning system. See page 166 for moreinformation on the radar sensor’s limitations.
NOTE
Strong sunlight, reflections, extreme lightcontrasts, the use of sunglasses, or if thedriver is not looking straight ahead maymake the visual warning signal in the wind-shield difficult to see.
WARNING
• Bad weather or winding roads mayaffect the radar sensor’s capacity todetect vehicles ahead.
• The size of the vehicle ahead, such as amotorcycle, may also make it difficult todetect. This may result in the warninglight illuminating at a shorter distancethan the one that has been set, or thatthe light will not come on at all.
Symbols and messages in the display
Symbol Message Description
- Time interval while it is being set.
- Time interval after it has been set.
04 Comfort and driving pleasure
Distance Alert*
04
* Option/accessory, for more information, see Introduction. 173
Symbol Message Description
Radar blocked See manual Distance Alert has been temporarily disconnected because the radar is obstructed in some way andcannot detect other vehicles. See page 166 for information on the radar sensor’s limitations.
Collision warn. Service
required
Distance Alert or Collision Warning with Auto-brake is not functioning properly. Contact a trained andqualified Volvo service technician.
04 Comfort and driving pleasure
Collision warning with Auto-brake*
04
174 * Option/accessory, for more information, see Introduction.
Introduction
Collision Warning with Auto-brake is designedto assist the driver if there is a risk of a collisionwith a vehicle ahead that is at a standstill ormoving in the same direction as your vehicle.
Collision Warning consists of the followingthree functions:
• Collision Warning warns the driver of apotential collision situation.
• Brake Support helps the driver brake effi-ciently in a critical situation.
• Auto-brake brakes the vehicle automati-cally if a collision cannot be avoided. Auto-brake cannot prevent a collision but canreduce the speed at which a collisionoccurs.
WARNING
The auto-brake function cannot prevent acollision but instead is intended to reducespeed at the moment of impact. For fullbraking effect, driver must apply the brakes.
WARNING
• Collision Warning does not work in alldriving, traffic, weather and road condi-tions. It does not react to vehicles nottraveling in the same direction as yourvehicle.
• The collision warning system is notdesigned to detect pedestrians.
• Warnings are only provided when therisk of collision is high. The "Function"section provides information about lim-itations that the driver must be aware ofbefore using Collision Warning.
• The auto-brake function can helpreduce the speed at impact but thedriver should always apply the brakesfor the best possible braking effect,even if auto-brake is actively applyingthe brakes.
• Never wait for a collision warning. Thissystem is designed to be a supplemen-tary driving aid. It is not, however,intended to replace the driver's atten-tion and judgement. The driver isresponsible for maintaining a safe dis-tance and speed, even when the colli-sion warning system is in use.
• Maintenance of the Collision Warningsystem's components must only be
performed by a trained and qualifiedVolvo technician.
Function
G017382
Function overview
Visual warning signal, collision risk
Radar sensor
Camera
Collision Warning
The radar sensor and the camera worktogether to detect stationary vehicles and vehi-cles that are moving in the same direction asyour vehicle. If there is a risk of collision, thedriver is alerted by a flashing red warning lightand an audible warning signal. Collision warn-ing is active at speeds above 5 mph (7 km/h).
04 Comfort and driving pleasure
Collision warning with Auto-brake*
04
��
* Option/accessory, for more information, see Introduction. 175
Brake Support
If the risk of collision continues to increase afterthe collision warning has been given, BrakeSupport is activated. Brake Support preparesthe brake system to react quickly, and thebrakes are applied slightly. This may be expe-rienced as a light tug.
If the brakes are applied quickly, full brakingeffect will be provided, even if pressure on thebrake pedal is light.
Auto-brake
If a collision is imminent and the driver has notapplied the brakes or begun to steer around thevehicle, the auto-brake function is activatedwithout the driver pressing the brake pedal.Limited brake force is applied to reduce thevehicle’s speed when the collision occurs. Thedriver must apply the brakes for full brakingeffect.
WARNING
The auto-brake function cannot prevent acollision but instead is intended to reducespeed at the moment of impact. For fullbraking effect, driver must apply the brakes.
NOTE
The auto-brake function is always on andcannot be turned off.
Operation
Some settings are controlled from the centerconsole via a menu system.
On and off
To switch Collision Warning on or off, go intothe menu Car settings Collision
warning settings and select On or Off. Whenthe engine is started, the setting that wasselected when it was switched off will be used.
When the engine is switched on, the CollisionWarning setting that was being used when itwas switched off will be the default setting.
Activating/deactivating warning signals
The collision warning system’s audible and vis-ual signals are activated automatically whenthe engine is started if the collision warningsystem is switched on.
The audible warning signal can be activated/deactivated by selecting the alternativeCollision warning on or Collis'n warning
OFF in Car settings Collision warning
settings Warning sound.
Setting a warning distance
This setting determines the distance at whichthe visual and audible warnings are triggered.Select Long, Normal or Short underCar
settings Collision warning settings
Warning distance
The warning distance determines the level ofsensitivity used by the system. The warningdistance Long provides an earlier warning.Begin by using Long and if the system givestoo many warnings, try changing to Normal.
WARNING
• The setting Short should only be usedin situations where traffic is light andmoving at low speeds.
• Collision Warning alerts the driver to therisk of a collision but this function can-not reduce the driver’s reaction time.
• For Collision Warning to be as effectiveas possible, it is recommended that Dis-tance Alert be set to 4 or 5, seepage 171.
04 Comfort and driving pleasure
Collision warning with Auto-brake*
04
176 * Option/accessory, for more information, see Introduction.
NOTE
• When Adaptive Cruise Control is used,the warning light and signal will be usedby that function, even if the warningsprovided by Collision Warning havebeen deactivated by the driver.
• In situations where traffic is moving atconsiderably different speeds, or if thevehicle ahead brakes suddenly, warn-ings may be considered to be late, evenif the setting Long has been selected.
Checking settings
The current Collision Warning settings can bechecked by going into the menu system at Car
settings Collision warning settings.See page 124 for more information on themenu system.
Limitations
Strong sunlight, reflections, extreme light con-trasts, the use of sunglasses, or if the driver isnot looking straight ahead may make the visualwarning signal in the windshield difficult to see.For this reason, always activate the audiblewarning signal.
Slippery driving conditions increase brakingdistance, which can reduce the system'scapacity to avoid a collision. In these condi-
tions, the ABS and DSTC systems provide thebest possible braking effect while helping tomaintain stability.
NOTE
The visual warning signal may be temporar-ily disengaged in the event of high passen-ger compartment temperature due to strongsunlight, etc. If this occurs, the audiblewarning signal will be used, even if it hasbeen deactivated in the menu system.
WARNING
• In certain situations, the system cannotprovide warnings or warnings may bedelayed if traffic conditions or otherexternal factors make it impossible forthe radar sensor or camera to detect avehicle ahead.
• Warnings may not be provided if thedistance to the vehicle ahead is short,or if movements of the steering wheel/brake pedal are great, such as duringactive driving.
• The sensor system has a limited rangefor stationary or slow-moving vehiclesand may therefore give delayed or nowarnings if your vehicle’s speed isabove approximately 45 mph(70 km/h).
• Warnings for stationary or slow-movingvehicles may not be provided in darkconditions.
The Collision Warning system uses the sameradar sensors as Adaptive Cruise Control. Formore information on the radar sensor and itslimitations, see page 166.
If no warning is given, or if a warning is delayed,Auto-brake will also not be provided or will bedelayed.
04 Comfort and driving pleasure
Collision warning with Auto-brake*
04
��
* Option/accessory, for more information, see Introduction. 177
NOTE
If warnings are given too frequently, thewarning distance can be reduced (seepage 175). This causes the system to pro-vide later warnings, which decreases thetotal number of warnings provided.
The camera’s limitations
The camera is used by Collision Warning withAuto-brake, Driver Alert Control (seepage 180), and Lane Departure Warning (seepage 183).
NOTE
• To help protect the camera in very hotconditions, it may be temporarilyswitched off for approximately 15minutes after the engine has beenstarted.
• Keep the section of the windshield infront of the camera clean and free of ice,snow, or condensation.
WARNING
• The camera has the same limitations asthe human eye. In other words, its“vision is impaired” by adverse weatherconditions such as heavy snowfall,dense fog, etc. These conditions mayreduce the function of systems thatdepend on the camera or cause thesesystems to temporarily stop function-ing.
• Never place any objects, decals, etc.,on the windshield in front of the camera.This could reduce or block the camera’sfunction, and could cause one or moreof the systems that utilize the camera tostop functioning.
• Strong sunlight, reflections from theroad surface, ice or snow covering theroad, a dirty road surface, or unclearlane marker lines may drastically reducethe camera’s capacity to detect the sideof a lane or another vehicle.
Fault tracing and actions
If the message Windscreen Sensors
blocked is displayed, this means that the cam-era is obscured and cannot detect vehicles orroad marker lines in front of the vehicle.
This, in turn, means that Collision Warning withAuto-brake, Lane Departure Warning, andDriver Alert Control will not have full function-ality.
The table lists possible causes for this mes-sage being displayed, and suitable actions.
04 Comfort and driving pleasure
Collision warning with Auto-brake*
04
178 * Option/accessory, for more information, see Introduction.
Cause Action
The surface of the windshield in front of the camera is dirty or coveredwith ice or snow.
Clean or clear the section of the windshield in front of the camera.
Fog, heavy rain or snow is interfering with the function of the camera. No action possible. Heavy precipitation may affect the function of thecamera.
The surface of the windshield is clean but the message remains in thedisplay.
Wait a short time. It may take several minutes for the camera to registervisibility.
The surface between the inside of the windshield and the camera is dirty. Contact an authorized Volvo retailer or service technician to have thissurface cleaned.
Symbols and messages in the display
Symbol Message Description
Collis'n warning OFF Collision Warning is switched off. This message is displayed when the engine is started and will dis-appear after approx. 5 seconds. It can also be erased by pressing the READ button.
Collision warn. Unavaila-
ble
Collision Warning cannot be activated. This message is displayed when the driver attempts to activatethe function. It will disappear after approx. 5 seconds or can be erased by pressing the READ button.
Auto braking was acti-
vated
Auto-braking has been active. This message can be erased by pressing the READ button.
Windscreen Sensors
blocked
The camera is temporarily not functioning. This message is displayed if the camera is obstructed bysnow, ice, dirt, etc., on the windshield. Clean the area of the windshield in front of the camera, seepage 177 for more information on the camera’s limitations.
04 Comfort and driving pleasure
Collision warning with Auto-brake*
04
* Option/accessory, for more information, see Introduction. 179
Symbol Message Description
Radar blocked See man-
ual
Collision Warning and Auto-brake are temporarily not functioning. The radar sensor is blocked, forexample by heavy rain or snow that has accumulated in front of the sensor, and cannot detect othervehicles, see page 166 for more information on the radar sensor’s limitations.
Collision warn. Service
required
Collision Warning and Auto-brake are partially or completely not functioning.
Contact a trained and qualified Volvo service technician if the message remains in the display.
04 Comfort and driving pleasure
Driver Alert System*
04
180 * Option/accessory, for more information, see Introduction.
Introduction
The Driver Alert System is designed to help adriver who may be becoming fatigued or whois inadvertently leaving the lane.
The Driver Alert System consists of two differ-ent functions that can be switched on togetheror separately.
• Driver Alert Control (DAC)
• Lane Departure Warning (LDW), seepage 183
When one or both of the functions has beenswitched on, it is in standby mode and is acti-vated when the vehicle exceeds a speed of40 mph (65 km/h).
The function deactivates if speed goes under37 mph (60 km/h).
Both functions use a camera that is dependenton the road/lane being clearly marked by pain-ted lines on each side.
WARNING
The Driver Alert system does not function inall situations and is designed to be a sup-plementary aid. It is not, however, intendedto replace the driver’s attention and judge-ment.
Driver Alert Control (DAC)–introduction
This function is intended to alert the driver ifhis/her driving becomes erratic, such as if thedriver is distracted or fatigued.
NOTE
The camera has certain limitations, seepage 166.
A camera monitors the painted lines markingthe lane in which the vehicle is traveling andcompares the direction of the road with thedriver’s movements of the steering wheel. Thedriver is alerted if the vehicle does not followthe lane smoothly.
DAC is designed to help detect a slowly chang-ing driving pattern. It is primarily intended to beused on main roads and is not meant for use incity traffic.
WARNING
• DAC is not intended to extend the dura-tion of driving. Always plan breaks atregular intervals to help remain alert.
• In certain cases, fatigue may not affectthe driver’s behavior. In situations ofthis type, no warning will be provided.Therefore, it is important to take breaksat regular intervals, regardless ofwhether or not DAC has given a warn-ing.
Limitations
In certain situations, DAC may provide warn-ings even if the driver’s driving pattern has notbecome erratic.
• if the driver is testing the LDW function
• in strong crosswinds
• on grooved road surfaces.
04 Comfort and driving pleasure
Driver Alert System*
04
��
* Option/accessory, for more information, see Introduction. 181
Operating DAC
Certain settings can be made from the menusystem controlled from the center instrumentpanel.
The current system status can be checked onthe trip computer’s display by using the but-tons on the left steering wheel lever.
Thumb wheel. Turn this wheel until Driver
Alert is displayed. The second line showsthe alternatives Off, Unavailable, or [-----], i.e., the number of bars.
READ button. Confirms and erases a mes-sage in the display.
Activating DAC
In the center instrument panel, go to Car
settings and select Driver Alert on.
The function is activated when thevehicle exceeds a speed of 40 mph(65 km/h). The display will show levelmarkings of 1–5 bars, where a low
number of bars indicates erratic driving. A highnumber of bars indicates stable driving.
If the vehicle is being driven erratically, thedriver will be alerted by an audible signal andthe message Driver Alert, Time for a break isdisplayed. The warning will be repeated after ashort time if the driving pattern remains thesame.
WARNING
• An alert should be taken seriously sinceit is sometimes difficult for a driver torealize that he/she is fatigued.
• In the event of a warning or if the driverfeels fatigued, stop as soon as possiblein a safe place and rest.
Symbols and messages in the display
Symbol Message Description
- Driver alert off The function is not switched on.
- Driver alert
Unavailable
The vehicle’s speed is below 37 mph (60 km/h) or the road lacks clear marking lines.
04 Comfort and driving pleasure
Driver Alert System*
04
182 * Option/accessory, for more information, see Introduction.
Symbol Message Description
Driver alert The function is analyzing the driver’s driving pattern. The number of bars varies from 1–5, where a lownumber of bars indicates erratic driving. A high number of bars indicates stable driving.
Driver Alert Time for a
break
The vehicle has been driven erratically. The driver receives an audible signal and a text message.
Windscreen Sensors
blocked
The camera is temporarily not functioning, due to snow, ice, or dirt on the windshield. Clean the areaof the windshield in front of the camera. See page 177 for information on the camera’s limitations.
Driver Alert Sys Service
required
The system is not functioning. Contact a trained and qualified Volvo service technician if the messageremains in the display.
04 Comfort and driving pleasure
Driver Alert System*
04
��
* Option/accessory, for more information, see Introduction. 183
Lane Departure Warning (LDW)–introduction
This function is designed to help reduce therisk of accidents in situations where the vehicleleaves its lane and there is a risk of driving offthe road or into the opposite lane. LDW con-sists of a camera that monitors the lane’s sidemarker lines. The driver is alerted by an audiblesignal if the vehicle crosses a side marker lineor the road’s center dividing line.
Operation and function
LDW can be switched on or off by pressing thebutton on the center console. A light in the but-ton illuminates when the function is on.
The trip computer display shows Lane Depart
Warn Unavailable when the function is instandby mode.
When LDW is in standby mode, the function isactivated automatically after the camera hasmonitored the road’s side marker lines and thevehicle’s speed exceeds 40 mph (65 km/h).Lane Depart Warn Available will be dis-played.
If the camera can no longer monitor the road’sside marker lines, or if the vehicle’s speed falls
below 37 mph (60 km/h), LDW will return tostandby mode and Lane Depart Warn
Unavailable will be displayed.
If the vehicle unexpectedly crosses the lane’sleft or right side marker lines, the driver will bealerted by an audible signal.
No warning signal will be given in the follow-ing situations:
• The turn signal is being used
• The driver’s foot is on the brake pedal1
• The throttle pedal is pressed quickly
• If the steering wheel is moved quickly
• In sharp turns that cause the vehicle’sbody to sway.
See page 177 for information on the camera’slimitations.
WARNING
The driver will only be warned once for eachtime the wheels cross a marker line. Noalarm will be given if a marker line isbetween the wheels.
1 A warning will be given even when Increased sensitivity has been selected.
04 Comfort and driving pleasure
Driver Alert System*
04
184 * Option/accessory, for more information, see Introduction.
Settings
Settings for Lane Departure Warning can bemade in the menu system under Car settings
Lane departure warning. See page124 for more information on the menu system.
There are two alternatives:
On at start-up: This selection puts the func-tion in standby mode each time the engine isstarted. Otherwise, the system will be in themode that it was in when the engine wasswitched off.
Increased sensitivity: This selection increa-ses the function’s sensitivity. Warnings will begiven at an earlier stage and fewer limitationsapply. When this setting is being used, the sys-
tem only needs to monitor lane marker lines onone side of the vehicle to change status toLane Depart Warn Available.
Symbols and messages in the display
Symbol Message Description
Lane departure warning ON/Lane
departure warning OFF
The function is switched on or off. The text disappears after 5 seconds.
- Lane Depart Warn Available The function is monitoring the road’s marker lines.
- Lane Depart Warn Unavailable Speed is below 37 mph (60 km/h) or if the road lacks clear marker lines.
Windscreen Sensors blocked The camera is temporarily not functioning, due to snow, ice, or dirt on the windshield. Cleanthe area of the windshield in front of the camera. See page 177 for information on the camera’slimitations.
Driver Alert Sys Service required The system is not functioning. Contact a trained and qualified Volvo service technician if themessage remains in the display.
04 Comfort and driving pleasure
Park assist*
04
��
* Option/accessory, for more information, see Introduction. 185
Introduction
The park assist system is designed to assistyou when driving into parking spaces, garages,etc. It utilizes four ultrasound sensors locatedin one or both bumpers to measure the dis-tance to a vehicle, object, or a person who maybe close to the front or rear of your vehicle. Anaudible signal and symbols in the audio sys-tem’s display indicate the distance to theobject.
This system is available in the rear bumperonly, or in both the front and rear bumpers.
WARNING
Park Assist is an information system, NOT asafety system. This system is designed tobe a supplementary aid when parking thevehicle. It is not, however, intended toreplace the driver's attention and judge-ment.
Function
Park assist button
The system is activated automatically when thevehicle is started. The indicator light in the but-ton in the center console illuminates when thesystem is on.
• The front park assist system is active fromthe time the engine is started until the vehi-cle exceeds a speed of approximately10 mph (15 km/h). It is also active when thevehicle is backing up.
• Rear park assist is active when the engineis running and reverse gear has beenselected.
Activating/deactivating
The system is activated automatically when thevehicle is started.
� Press the Park assist button on the centerconsole to temporarily deactivate the sys-tem(s).> The indicator light in the button will go
out when the system has been deacti-vated.
Park assist will be automatically reactivated thenext time the engine is started, or if the buttonis pressed (the indicator light in the button willilluminate).
NOTE
• Front park assist is disengaged auto-matically when the parking brake isapplied.
• If the vehicle is equipped with front andrear park assist, both systems will bedeactivated by pressing the button.
04 Comfort and driving pleasure
Park assist*
04
186 * Option/accessory, for more information, see Introduction.
Signals from the park assist system
Active
Active
Active
1
2
3
Views in the display
Visual indicator
The audio system’s display gives an overviewof the vehicle’s position in relation to adetected object.
The markers in the display indicate that one ormore of the four sensors has detected anobject. The greater the number of markers, thecloser the vehicle is to the object.
Display in a vehicle with rear park assistonly: An object has been detected by both ofthe right rear sensors.
Display in a vehicle with both front and rearpark assist. The solid marker in this exampleindicates that an object is closer than approx-imately 1 foot (30 cm) to the right front sensor.
Display in a vehicle with both front and rearpark assist: Reverse gear is selected and noobjects have been detected in front of orbehind the vehicle.
Audible signal
The Park Assist system uses an intermittenttone that pulses faster as you come close to anobject, and becomes constant when you arewithin approximately 1 ft (30 cm) of an objectin front of or behind the vehicle (example 2 inthe illustration). If there are objects within thisdistance both behind and in front of the vehicle,the tone alternates between front and rearspeakers.
If the volume of another source from the audiosystem is high, this will be automatically low-ered.
Rear park assist
G01
7833
The distance monitored behind the vehicle isapproximately 5 ft (1.5 m). The audible signalcomes from the rear speakers.
The system must be deactivated when towinga trailer, carrying bicycles in a rear-mountedcarrier, etc, which could trigger the rear parkassist system's sensors.
NOTE
Rear park assist is deactivated automati-cally when towing a trailer if Volvo genuinetrailer wiring is used.
04 Comfort and driving pleasure
Park assist*
04
��
* Option/accessory, for more information, see Introduction. 187
Front park assist
G02
1424
The distance monitored in front of the vehicleis approximately 2.5 ft (0.8 m). The audible sig-nal comes from the audio system's frontspeakers.
It may not be possible to combine auxiliaryheadlights and front park assist since theselights could trigger the system's sensors.
NOTE
Front park assist is deactivated when theparking brake is applied and or when thegear selector is in the P position.
Faults in the system
If the information symbol illuminates and Park
assist syst Service required is shown on theinformation display, this indicates that the sys-tem is not functioning properly and has beendisengaged. Consult a trained and qualifiedVolvo service technician.
CAUTION
In certain circumstances, the park assistsystem may give unexpected warning sig-nals that can be caused by external soundsources that use the same ultrasound fre-quencies as the system. This may includesuch things as the horns of other vehicles,wet tires on asphalt, pneumatic brakes,motorcycle exhaust pipes, etc. This doesnot indicate a fault in the system.
Cleaning the sensors
Location of the front sensors
Location of the rear sensors
The sensors must be cleaned regularly toensure that they work properly. Clean them
04 Comfort and driving pleasure
Park assist*
04
188 * Option/accessory, for more information, see Introduction.
with water and a suitable car washing deter-gent.
Ice and snow covering the sensors may causeincorrect warning signals.
NOTE
If the sensors are obstructed by e.g., dirt,snow, or ice, this could result in false warn-ing signals from the park assist system.
04 Comfort and driving pleasure
Rear Park Assist Camera (PAC)*
04
��
* Option/accessory, for more information, see Introduction. 189
Introduction
The Park Assist Camera uses the display on thedashboard to show the area behind the carwhile you are backing up.
PAC also shows guiding lines in the on-screenimage to indicate the direction that the vehiclewill take as it moves rearward, which helpssimplify parallel parking, backing into a tightspace or when attaching a trailer to the vehicle.
NOTE
PAC can only be installed on vehicles equip-ped with the Volvo’s own navigation systemVNS.
WARNING
• PAC is designed to be a supplementaryaid when parking the vehicle. It is not,however, intended to replace thedriver’s attention and judgment.
• The camera has blind spots where itcannot detect objects or people behindthe vehicle.
• Pay particular attention to people or ani-mals that are close to the vehicle.
Function
The driver sees what is behind the vehicle andif a person or animal should suddenly appearfrom the side.
PAC is mounted on the tailgate, near the open-ing handle.
The camera has built-in electronics that helpreduce the “fish-eye” effect so that the imageshown on the screen is as natural as possible.This may cause some objects on the screen to“lean,” which is normal.
WARNING
Objects seen on the screen may be closerthan they appear to be.
Ambient lighting conditions
The camera automatically monitors the ambi-ent lighting conditions behind the vehicle andconstantly adjusts sensitivity to light. This maycause the brightness and quality of the imageon the screen to vary slightly. Sensitivity to lightis increased in dark conditions or in badweather, which may affect image quality.
If the image on the screen seems too dark,brightness can be increased with the thumbwheel on the lighting panel.
NOTE
In order to function properly, the cameralens should always be kept clean. This isparticularly important in bad weather. Keepthe lens free of dirt, ice or snow.
Using PAC
Activation
PAC is activated when the gear selector ismoved to R if the system is set to Automatic
under Parking camera settings in the menusystem.
If the Volvo Navigation System (VNS) is in use,PAC will automatically override the navigationsystem to show the camera's image on thescreen instead of navigation information, for aslong as reverse gear is selected.
Deactivation
Move the gear selector from R to another posi-tion. There is a slight delay in the PAC system,which means that the view from behind thevehicle will remain on the screen for approxi-mately 15 seconds after the gear selector hasbeen moved from the R position or until thevehicle reaches a forward speed of 6 mph(10 km/h). The screen will then revert to themode that it was in before R was selected andwill, for example, display navigation systeminformation.
04 Comfort and driving pleasure
Rear Park Assist Camera (PAC)*
04
190 * Option/accessory, for more information, see Introduction.
Guiding lines
G00
0000
The lines on the screen are projected as if theywere a path on the ground behind the vehicleand are affected by the way in which the steer-ing wheel is turned. This enables the driver tosee path the vehicle will take, even if he/sheturns the steering wheel while backing up.
NOTE
When backing up with a trailer, the guidinglines show the path that the vehicle willtake, not the trailer.
WARNING
Keep in mind that the image on the screenonly shows the area behind the vehicle. Thedriver must always watch for people, ani-mals, other vehicles, etc., near the sides ofthe vehicle when turning while backing up.
Marker lines
The PAC system's lines
Marker line for a 1-foot (30-centimeter)zone behind the vehicle
Marker line for the clear back-up zone
"Wheel tracks"
The solid line (1) indicates a zone within 1 ft(30 centimeters) of the rear bumper.
The dashed line (2) indicates the clear zone ofapproximately 5 feet (1.5 m) behind thebumper. These lines also indicate the outmostlimits that any object (door mirrors, corners ofthe body, etc.) extends out from the vehicle ,even when the it turns.
The "wheel tracks" (3) between the side markerlines show where the wheels will roll and canextend up to approximately 10.5 ft (3.2 m)behind the bumper if there are no objects in theway.
Vehicles equipped with Park Assist
G03
1931
If the vehicle is equipped with the optional ParkAssist system, the distance to an object will beindicated more exactly and colored markers inthe display indicate which of the sensor(s) hasdetected the object.
04 Comfort and driving pleasure
Rear Park Assist Camera (PAC)*
04
* Option/accessory, for more information, see Introduction. 191
The markers change color (from yellow toorange to red) as the vehicle comes closer tothe object.
Marker (color) Distance toobject
Green > 5 ft (1.5 m)
Yellow 5–1 ft (0.3–1.5)
Red 0–1 ft (0–0.3)
Settings
To make PAC system settings, press theMENU button in the center console controlpanel and go to Main menu Car settings
and select one of the following:
Parking camera settings
• Mark Park Assist lines to display the side-lines while backing up.
• Mark Distance information to display theintersecting lines while backing up.
Activating the system
• Mark Automatic to activate PAC eachtime reverse gear is selected.
• Mark Off to turn off PAC completely.
Summary
• The camera is activated when the gearselector is moved to R (this can be
changed in the settings menu) and theimage is shown on the navigation system'sdisplay.
• When backing up, two solid lines are pro-jected on the screen to show the path thatthe vehicle's rear wheels will take. Theselines are affected by movements of thesteering wheel. The vehicle's approximateouter dimension are shown by two dashedlines.
• The graphic lines will not be displayedwhen backing up with a trailer that is con-nected to the vehicle's electrical system.
• Objects on the ground that are closer than1 ft (30 centimeters) cannot be detected bythe camera.
• The camera is active for approx.5 seconds after the gear selector is movedto R or until the vehicle's speed exceeds6 mph (10 km/h).
• The optional Park Assist sensors and theparking camera work together and infor-mation from the sensors is shown graphi-cally on the display.
• If the Park Assist* system's sensors detecta trailer, the camera will zoom in on thetrailer hitch to help position the trailer'stongue correctly.
• The graphic lines shown on the screenwhen the vehicle backs up can be disabledin the settings menu.
• Automatic or manual zoom can beselected in the settings menu.
Limitations
Even if a fairly small section of the screen imageappears to be obstructed, this may mean thata relatively large area behind the vehicle is hid-den and objects there may not be detecteduntil they are very near the vehicle.
NOTE
Bicycle carriers or other accessories moun-ted on the tailgate may obstruct the cam-era's field of view.
Keep in mind
• Keep the camera's lens free of dirt, ice andsnow. Remove ice and snow carefully toavoid scratching the lens.
• Clean the lens regularly with warm waterand a suitable car washing detergent.
04 Comfort and driving pleasure
Blind Spot Information System*
04
192 * Option/accessory, for more information, see Introduction.
Introduction
G02
1426
BLIS camera
Indicator light
BLIS symbol
The Blind Spot Information System (BLIS) is aninformation system that indicates the presenceof another vehicle moving in the same directionas your vehicle in the side-view mirror's "blindarea."
CAUTION
The BLIS system should only be repaired bya trained and qualified Volvo service tech-nician.
WARNING
• BLIS is an information system, NOT awarning or safety system.
• BLIS does not eliminate the need foryou to visually confirm the conditionsaround you, and the need for you to turnyour head and shoulders to make surethat you can safely change lanes.
• As the driver, you have full responsibilityfor changing lanes in a safe manner.
The system is based on digital camera tech-nology. The cameras are located beneath theside-view mirrors.
When one (or both) of the cameras havedetected a vehicle in the blind area (up toapproximately 10 ft. (3 meters) from the side ofyour vehicle, and up to approximately 31 ft.(9.5 meters) behind the side-view mirror), seethe illustration, the indicator light in the doorpanel illuminates. The light will glow continu-ously to alert the driver of the vehicle in theblind area.
NOTE
The door panel indicator light illuminates onthe side of the vehicle where the system hasdetected another vehicle. If your vehicle ispassed on both sides at the same time, bothlights will illuminate.
BLIS has an integrated function that alerts thedriver if a fault should occur with the system.For example, if one or both of the system'scameras are obscured, a message (see thetable on page 194) will appear in the informa-tion display in the instrument panel. If thisoccurs, clean the camera lenses. If necessary,the system can be temporarily switched off (forinstructions, see page 194).
Areas monitored by BLIS Distance A = approx.31 ft. (9.5 meters), Distance B = approx. 10 ft.(3 meters)
04 Comfort and driving pleasure
Blind Spot Information System*
04
��
* Option/accessory, for more information, see Introduction. 193
When does BLIS function
The system functions when your vehicle ismoving at speeds above 6 mph (10 km/h).
When you pass another vehicle:
The system reacts when you pass anothervehicle at a speed of up to 6 mph (10 km/h)faster than that vehicle.
When you are passed by another vehicle:
The system reacts if your vehicle is passed byanother vehicle at a speed of up to 43 mph(70 km/h) faster than your vehicle.
WARNING
• BLIS does not function in sharp curves.
• BLIS does not function when your vehi-cle is backing up.
• If you are towing a wide trailer, this mayprevent the BLIS cameras from detect-ing other vehicles in adjacent lanes.
How BLIS functions in daylight and
darkness
Daylight
BLIS reacts to the shape of surrounding vehi-cles. The system is designed to help detectmotor vehicles such as cars, trucks, buses,motorcycles, etc.
Darkness
BLIS reacts to the headlights of surroundingvehicles. In order to be detected by BLIS, avehicle in the blind area must have its head-lights on. This means, for example, that thesystem will not detect a trailer without head-lights that is being towed behind a car or truck.
WARNING
• BLIS does not react to cyclists ormopeds.
• BLIS does not react to vehicles that arestanding still.
• The BLIS cameras have the same limi-tation as the human eye. In other words,their "vision is impaired" by adverseweather conditions such as heavysnowfall, intense light directly into thecamera, dense fog, etc.
Limitations
In certain situations, the BLIS indicator light(s)may illuminate even when there are no othervehicles in the area monitored by the system.
NOTE
If the BLIS indicator lights illuminate occa-sionally even when there are no other vehi-cles in the blind area, this does not indicatea fault in the system.
In the event of a fault, Blind spot syst.Service required will be displayed.
The following are several examples of situa-tions in which the BLIS indicator light(s) mayilluminate even when there are no other vehi-cles in the area monitored by the system.
Light reflected from a wet road surface
04 Comfort and driving pleasure
Blind Spot Information System*
04
194 * Option/accessory, for more information, see Introduction.
The vehicle's own shadow against a large, light,smooth surface such as barriers between lanes ona highway
Sunlight directly in the camera when the sun is lowon the horizon
Cleaning the BLIS camera lenses
In order to function optimally, the BLIS cameralenses must be kept clean. They can be wipedclean with a soft cloth or wet sponge.
CAUTION
• Clean the lenses carefully to avoidscratching.
• The lenses are electrically heated tohelp melt ice or snow. If necessary, gen-tly brush away snow from the lenses.
Switching BLIS on and off
BLIS is automatically activated when the igni-tion is switched on. The indicator lights willprovide confirmation by flashing 3 times.
• The system can be switched off by press-ing the BLIS button in the center console(see the illustration). The indicator light inthe button goes out when the system is
switched off, and a text message is dis-played.
• BLIS can be switched on again by pressingthe button. The indicator light in the buttonwill illuminate and a new text message willbe displayed. Press the READ button (seepage 126) to erase the message.
BLIS system messages
Text in the dis-play
System status
Blind spot syst.
Service required
BLIS not functioningproperly. Contact anauthorized Volvoservice technician.
Blind spot syst.
camera blocked
BLIS cameraobscured. Clean thelenses.
Blind-spot info
system ON
BLIS system on
04 Comfort and driving pleasure
Blind Spot Information System*
04
* Option/accessory, for more information, see Introduction. 195
Text in the dis-play
System status
Blind-spot info
system OFF
BLIS system off
Blind spot syst.
Reduced function
The BLIS cameras'function has beenreduced due toweak or impaireddata transferbetween the BLISsystem's camerasand the vehicle'selectrical system.The cameras willreset themselveswhen this datatransfer hasreturned to normal.
04 Comfort and driving pleasure
Passenger compartment convenience
04
��
197
Compartment in door panel
Storage pocket on the front edge of thefront seat cushions
Glove compartment
Storage compartment, 12-volt socket andAUX input
Jacket holder
Rear seat cup holders
Storage pocket
Jacket holder
The jacket hanger is located on the inboardside of the front passenger's seat headrestraint. It is only intended for hanging lightgarments.
Tunnel console
G02
1436
Storage compartment (for CDs, etc.) underarmrest.
Includes cup holder for driver and passen-ger, 12 V socket and small storage com-partment.
Glove compartment
The owner's manual and maps can be kepthere. There are also holders for pens and fuelcards. The glove compartment can be lockedmanually with the key blade, see page 66.
04 Comfort and driving pleasure
Passenger compartment convenience
04
198 * Option/accessory, for more information, see Introduction.
Vanity mirror
G02
1438
Vanity mirror with lighting
The light comes on automatically when thecover is lifted.
12-volt sockets
G02
1439
12-volt socket in the front tunnel console
G02
1440
12-volt socket in the rear center console
The electrical socket can be used for 12-voltaccessories such as cell phone chargers andcoolers. The maximum current is 10 A. For the
socket to supply current, the ignition must bein at least mode I, see page 79.
The auxiliary socket can also be used to powera cigarette lighter. Accessory cigarette lightersand ashtrays can be purchased from yourVolvo retailer.
WARNING
Always keep the sockets covered when notin use.
12-volt socket in the cargo area*
G01
7825
Fold down the cover to access the electricalsocket.
04 Comfort and driving pleasure
Passenger compartment convenience
04
199
NOTE
The 12-volt socket in the cargo area pro-vides electrical current even when the igni-tion is switched off. Using the socket whilethe engine is not running will drain the bat-tery.
200
Driving recommendations..................................................................... 202Refueling............................................................................................... 206Loading................................................................................................. 211Cargo area ........................................................................................... 216Towing a trailer...................................................................................... 220Emergency towing................................................................................ 222
05 During your trip
Driving recommendations
05
202
General information
Economical driving conserves natural
resources
Better driving economy may be obtained bythinking ahead, avoiding rapid starts and stopsand adjusting the speed of your vehicle toimmediate traffic conditions.
Observe the following rules:
• Bring the engine to normal operating tem-perature as soon as possible by drivingwith a light foot on the accelerator pedal forthe first few minutes of operation. A coldengine uses more fuel and is subject toincreased wear.
• Whenever possible, avoid using the vehiclefor driving short distances. This does notallow the engine to reach normal operatingtemperature.
• Drive carefully and avoid rapid accelerationand hard braking.
• Use the transmission's Drive (D) positionas often as possible and avoid using kick-down.
• Do not exceed posted speed limits.
• Avoid carrying unnecessary items (extraload) in the vehicle.
• Maintain correct tire pressure. Check tirepressure regularly (when tires are cold).
• Remove snow tires when threat of snow orice has ended.
• Note that roof racks, ski racks, etc,increase air resistance and also fuel con-sumption.
• At highway driving speeds, fuel consump-tion will be lower with the air conditioningon and the windows closed than with theair conditioning off and the windows open.
• Using the onboard trip computer's fuelconsumption modes can help you learnhow to drive more economically.
Other factors that decrease gas mileage
are:
• Dirty air cleaner
• Dirty engine oil and clogged oil filter
• Dragging brakes
• Incorrect front end alignment
Some of the above mentioned items and othersare checked at the standard maintenanceintervals.
WARNING
Driving with the tailgate open: Driving withthe tailgate open could lead to poisonousexhaust gases entering the passenger com-partment. If the tailgate must be kept openfor any reason, proceed as follows:
• Close the windows
• Set the ventilation system control to airflow to floor, windshield and side win-dows and the blower control to its high-est setting.
Weight distribution affects handling
At the specified curb weight your vehicle has atendency to understeer, which means that thesteering wheel has to be turned more thanmight seem appropriate for the curvature of abend. This ensures good stability and reducesthe risk of rear wheel skid. Remember thatthese properties can alter with the vehicle load.The heavier the load in the cargo area, the lessthe tendency to understeer.
Handling, roadholding
Vehicle load, tire design and inflation pressureall affect vehicle handling. Therefore, checkthat the tires are inflated to the recommendedpressure according to the vehicle load. See the"Tire pressure" section. Loads should be dis-tributed so that capacity weight or maximumpermissible axle loads are not exceeded.
05 During your trip
Driving recommendations
05
��
203
Driving through water
• The vehicle can be driven through water upto a depth of approximately 10 in. (25 cm),at a maximum speed of 6 mph (10 km/h).
• Take particular care when driving throughflowing water.
• Clean the electrical connections for trailerwiring after driving in mud or water.
• When driving through water, maintain lowspeed and do not stop in the water.
WARNING
After driving through water, press lightly onthe brake pedal to ensure that the brakesare functioning normally. Water or mud canmake the brake linings slippery, resulting indelayed braking effect.
CAUTION
• Engine damage will occur if water isdrawn into the air cleaner.
• If the vehicle is driven through waterdeeper than 10 in (25 cm), water mayenter the differential and the transmis-sion. This reduces the oil's lubricatingcapacity and may shorten the servicelife of these components.
• Do not allow the vehicle to stand inwater up to the door sills longer thanabsolutely necessary. This could resultin electrical malfunctions.
• If the engine has been stopped while thevehicle is in water, do not attempt torestart it. Have the vehicle towed out ofthe water.
Engine and cooling system
Under special conditions, for example whendriving in hilly terrain, extreme heat or withheavy loads, there is a risk that the engine andcooling system will overheat. Proceed as fol-lows to avoid overheating the engine.
• Maintain a low speed when driving with atrailer up long, steep hills.
• Do not turn the engine off immediatelywhen stopping after a hard drive.
WARNING
The cooling fan may start or continue tooperate (for up to 6 minutes) after the enginehas been switched off.
• Remove any auxiliary lights from in front ofthe grille when driving in hot weather con-ditions.
• Do not exceed engine speeds of 4500 rpmif driving with a trailer in hilly terrain. The oiltemperature could become too high.
Conserving electrical current
Keep the following in mind to help minimizebattery drain:
• When the engine is not running, avoidusing ignition mode II. Many electrical sys-tems (the audio system, the optional navi-gation system, power windows, etc) willfunction in ignition modes 0 and I. Thesemodes reduce drain on the battery.
• Please keep in mind that using systems,accessories, etc., that consume a greatdeal of current when the engine is not run-ning could result in the battery being com-pletely drained. Driving or having theengine running for approximately15 minutes will help keep the batterycharged.
• The optional 12 volt socket in the cargoarea provides electrical current even with
05 During your trip
Driving recommendations
05
204
the ignition switched off, which drains thebattery.
Before a long distance trip
It is always worthwhile to have your vehiclechecked by a trained and qualified Volvo serv-ice technician before driving long distances.Your retailer will also be able to supply you withbulbs, fuses, spark plugs and wiper blades foryour use in the event that problems occur.
As a minimum, the following items should bechecked before any long trip:
• Check that engine runs smoothly and thatfuel consumption is normal.
• Check for fuel, oil, and fluid leakage
• Have the transmission oil level checked.
• Check condition of drive belts.
• Check state of the battery's charge.
• Examine tires carefully (the spare tire aswell), and replace those that are worn.Check tire pressures.
• The brakes, front wheel alignment, andsteering gear should be checked by atrained and qualified Volvo service techni-cian only.
• Check all lights, including high beams.
• Reflective warning triangles are legallyrequired in some states/provinces.
• Have a word with a trained and qualifiedVolvo service technician if you intend todrive in countries where it may be difficultto obtain the correct fuel.
• Consider your destination. If you will bedriving through an area where snow or iceare likely to occur, consider snow tires.
Cold weather precautions
If you wish to check your vehicle before theapproach of cold weather, the following adviceis worth noting:
• Make sure that the engine coolant contains50 percent antifreeze. Any other mixturewill reduce freeze protection. This givesprotection against freezing down to–31 °F (–35 °C). The use of "recycled" anti-freeze is not approved by Volvo. Differenttypes of antifreeze must not be mixed.
• Volvo recommends using only genuineVolvo antifreeze in your vehicle's radiator.
• Try to keep the fuel tank well filled – thishelps prevent the formation of condensa-tion in the tank. In addition, in extremelycold weather conditions it is worthwhile toadd fuel line de-icer before refueling.
• The viscosity of the engine oil is important.Oil with low viscosity (thinner oil) improvescold-weather starting as well as decreas-ing fuel consumption while the engine iswarming up. For winter use, 5W-30 oil, par-ticularly the synthetic type, is recom-
mended. Be sure to use good quality oil butdo not use cold-weather oil for hard drivingor in warm weather, see page 298 for moreinformation on engine oil.
NOTE
Synthetic oil is not used when the oil ischanged at the normal maintenance inter-vals except at owner request and at addi-tional charge.
• The load placed on the battery is greaterduring the winter since the windshield wip-ers, lighting, etc. are used more often.Moreover, the capacity of the batterydecreases as the temperature drops. Invery cold weather, a poorly charged bat-tery can freeze and be damaged. It is there-fore advisable to check the state of chargemore frequently and spray an anti-rust oilon the battery posts.
• Volvo recommends the use of snow tireson all four wheels for winter driving, seepage 239.
• To prevent the washer fluid reservoir fromfreezing, add washer solvents containingantifreeze. This is important since dirt isoften splashed on the windshield duringwinter driving, requiring the frequent use ofthe washers and wipers. Volvo WasherSolvent should be diluted as follows: Downto 14 °F (–10 °C): 1 part washer solvent and
05 During your trip
Driving recommendations
05
205
4 parts water Down to 5 °F (–15 °C): 1 partwasher solvent and 3 parts water Down to0 °F (–18 °C): 1 part washer solvent and2 parts water Down to –18 °F (–28 °C):1 part washer solvent and 1 part water.
• Use Volvo Teflon Lock Spray in the locks.
• Avoid using de-icing sprays as they cancause damage to the locks.
05 During your trip
Refueling
05
206
Fuel requirements
Deposit control gasoline (detergent
additives)
Volvo recommends the use of detergent gas-oline to control engine deposits. Detergentgasoline is effective in keeping injectors andintake valves clean. Consistent use of depositcontrol gasolines will help ensure good driva-bility and fuel economy. If you are not surewhether the gasoline contains deposit controladditives, check with the service station oper-ator.
NOTE
Volvo does not recommend the use of exter-nal fuel injector cleaning systems.
Unleaded fuel
Each Volvo has a three-way catalytic converterand must use only unleaded gasoline. U.S. andCanadian regulations require that pumps deliv-ering unleaded gasoline be labelled "UNLEA-DED". Only these pumps have nozzles whichfit your vehicle's filler inlet. It is unlawful to dis-pense leaded fuel into a vehicle labelled"unleaded gasoline only". Leaded gasolinedamages the three-way catalytic converter andthe heated oxygen sensor system. Repeateduse of leaded gasoline will lessen the effective-
ness of the emission control system and couldresult in loss of emission warranty coverage.State and local vehicle inspection programswill make detection of misfueling easier, pos-sibly resulting in emission test failure for mis-fueled vehicles.
NOTE
Some U.S. and Canadian gasolines containan octane enhancing additive called methyl-cyclopentadienyl manganese tricarbonyl(MMT). If such fuels are used, your EmissionControl System performance may be affec-ted, and the Check Engine Light (malfunc-tion indicator light) located on your instru-ment panel may light. If this occurs, pleasereturn your vehicle to a trained and qualifiedVolvo service technician for service.
Gasoline containing alcohol and ethers,
"Oxygenated fuels"
Some fuel suppliers sell gasoline containing"oxygenates" which are usually alcohols orethers. In some areas, state or local lawsrequire that the service pump be marked indi-cating use of alcohols or ethers. However,there are areas in which the pumps areunmarked. If you are not sure whether there isalcohol or ethers in the gasoline you buy, checkwith the service station operator. To meet sea-
sonal air quality standards, some areas requirethe use of "oxygenated" fuel.
Volvo allows the use of the following "oxygen-ated" fuels; however, the octane ratings listedon page 207 must still be met.
Alcohol – Ethanol
Fuels containing up to 10% ethanol by volumemay be used. Ethanol may also be referred toas Ethyl alcohol, or "Gasohol".
Ethers – MTBE: Fuels containing up to15% MTBE may be used.
Methanol
Do not use gasolines containing methanol(methyl alcohol, wood alcohol). This practicecan result in vehicle performance deteriorationand can damage critical parts in the fuel sys-tem. Such damage may not be covered underthe New Vehicle Limited Warranty.
05 During your trip
Refueling
05
��
207
Octane rating
Minimum octane
G02
8920
Typical pump octane label
Volvo recommends premium fuel for best per-formance, but using 87 octane1 or above willnot affect engine reliability.
Volvo engines are designed to achieve ratedhorsepower, torque, and fuel economy per-formance using premium 91 octane fuel.
Demanding driving
In demanding driving conditions, such as oper-ating the vehicle in hot weather, towing a trailer,or driving for extended periods at higher alti-tudes than normal, it may be advisable toswitch to higher octane fuel (91 or higher) or to
change gasoline brands to fully utilize yourengine's capacity, and for the smoothest pos-sible operation.
NOTE
When switching to higher octane fuel orchanging gasoline brands, it may be neces-sary to fill the tank more than once before adifference in engine operation is noticeable.
Fuel Formulations
Do not use gasoline that contains lead as aknock inhibitor, and do not use lead additives.Besides damaging the exhaust emission con-trol systems on your vehicle, lead has beenstrongly linked to certain forms of cancer.
Many fuels contain benzene as a solvent.Unburned benzene has been strongly linked tocertain forms of cancer. If you live in an areawhere you must fill your own gas tank, takeprecautions. These may include:
• standing upwind away from the filler nozzlewhile refueling
• refueling only at gas stations with vaporrecovery systems that fully seal the mouthof the filler neck during refueling
• wearing neoprene gloves while handling afuel filler nozzle.
Use of Additives
With the exception of gas line antifreeze duringwinter months, do not add solvents, thicken-ers, or other store-bought additives to yourvehicle's fuel, cooling, or lubricating systems.Overuse may damage your engine, and someof these additives contain organically volatilechemicals. Do not needlessly expose yourselfto these chemicals.
WARNING
Never carry a cell phone that is switchedon while refueling your vehicle. If the phonerings, this may cause a spark that couldignite gasoline fumes, resulting in fire andinjury.
WARNING
Carbon monoxide is a poisonous, colorless,and odorless gas. It is present in all exhaustgases. If you ever smell exhaust fumesinside the vehicle, make sure the passengercompartment is ventilated, and immediatelyreturn the vehicle to a trained and qualifiedVolvo service technician for correction.
1 AKI (ANTI KNOCK INDEX) is an average of the Research Octane Number (RON) and the Motor Octane Number (MON), MON+RON/2.
05 During your trip
Refueling
05
208
Opening/closing the fuel filler door
The fuel filler door is located on the right rearfender (indicated by an arrow beside the fueltank symbol on the information display )
With the ignition switched off, press andrelease the button on the lighting panel tounlock the fuel filler door. Please note that thefuel filler door will remain unlocked until thevehicle begins to move forward. An audibleclick will be heard when the fuel filler doorrelocks.
• If you intend to leave your vehicle while itis being refueled, this feature enables youto lock the doors/tailgate while leaving thefuel filler door unlocked.
• You can also keep the vehicle locked if youremain inside it during refueling. The cen-
tral locking button does not lock the fuelfiller door.
• Be sure the fuel filler door is not obstructedand is completely closed after refueling.
• Open the fuel filler cap slowly during hotweather.
Close the fuel filler door by pressing it a clickindicates that it is closed.
CAUTION
• Avoid spilling gasoline during refueling.In addition to causing damage to theenvironment, gasolines containingalcohol can cause damage to paintedsurfaces, which may not be coveredunder the New Vehicle Limited War-ranty.
Manually opening the fuel filler door
If necessary, the fuel filler door can be openedmanually:
1. Open the side hatch in the cargo compart-ment (on the same side as the fuel fillerdoor).
2. Grasp the green cord with a handle.
3. Gently pull the cord straight rearward untilthe fuel filler door clicks open.
05 During your trip
Refueling
05
��
209
Opening/closing the fuel cap
G02
2915
Fuel vapor expands in hot weather. Open thefiller cap slowly.
After refueling, close the fuel filler cap by turn-ing it clockwise until it clicks into place.
CAUTION
• Do not refuel with the engine running2.Turn the ignition off or to position I. If theignition is on, an incorrect reading couldoccur in the fuel gauge.
• Avoid overfilling the fuel tank. Do notpress the handle on the filler nozzlemore than one extra time. Too much fuelin the tank in hot weather conditions cancause the fuel to overflow. Overfillingcould also cause damage to the emis-sion control systems.
Emission controls
Three-way catalytic converter
• Keep your engine properly tuned. Certainengine malfunctions, particularly involvingthe electrical, fuel or distributor ignitionsystems, may cause unusually high three-way catalytic converter temperatures. Donot continue to operate your vehicle if youdetect engine misfire, noticeable loss ofpower or other unusual operating condi-tions, such as engine overheating or back-firing. A properly tuned engine will help
avoid malfunctions that could damage thethree-way catalytic converter.
• Do not park your vehicle over combustiblematerials, such as grass or leaves, whichcan come into contact with the hot exhaustsystem and cause such materials to igniteunder certain wind and weather condi-tions.
• Excessive starter cranking (in excess ofone minute), or an intermittently firing orflooded engine can cause three-way cata-lytic converter or exhaust system over-heating.
• Remember that tampering or unauthorizedmodifications to the engine, the EngineControl Module, or the vehicle may be ille-gal and can cause three-way catalytic con-verter or exhaust system overheating. Thisincludes: altering fuel injection settings orcomponents, altering emission systemcomponents or location or removing com-ponents, and/or repeated use of leadedfuel.
NOTE
Unleaded fuel is required for vehicles withthree-way catalytic converters.
2 If the fuel filler cap is not closed tightly or if the engine is running when the vehicle is refueled, the Check Engine Light (malfunction indicator lamp) may indicate a fault. However, your vehicle'sperformance will not be affected. Use only Volvo original or approved fuel filler caps.
05 During your trip
Refueling
05
210
Heated oxygen sensors
The heated oxygen sensors monitor the oxy-gen content of the exhaust gases. Readingsare fed into a control module that continuouslymonitors engine functions and controls fuelinjection. The ratio of fuel to air into the engineis continuously adjusted for efficient combus-tion to help reduce harmful emissions.
05 During your trip
Loading
05
��
* Option/accessory, for more information, see Introduction. 211
Introduction
The load carrying capacity of your vehicle isdetermined by factors such as the number ofpassengers, the amount of cargo, the weightof any accessories that may be installed, etc.
To increase loading space, the rear seat backr-ests can be folded down, see page 84.
When loading the cargo area, keep the follow-ing in mind:
• Load objects in the cargo area against thebackrest whenever possible.
• Unstable loads can be secured to the loadanchoring eyelets with straps or web lash-ings to help keep them from shifting.
• Stop the engine and apply the parkingbrake when loading or unloading longobjects. The gear selector can be knockedout of position by long loads, which couldset the vehicle in motion.
WARNING
• Stop the engine, put the gear selector inP, and apply the parking brake whenloading or unloading long objects.
• The vehicle's driving characteristicsmay change depending on the weightand distribution of the load.
• A 44-pound (20 kg) object produces aforce of 2,200 pounds (1,000 kg) in ahead-on collision at 30 mph (50 km/h).
• The cargo area and rear seat should notbe loaded to a level higher than 2 in.(5 cm) below the upper edge of the rearside windows. Objects placed higherthan this level could impede the func-tion of the Inflatable Curtain.
Power tailgate*
G01
7876
Power tailgate closing button
Automatic opening
The power tailgate can be opened automati-cally in the three ways:
• By pressing and holding the but-ton on the lighting panel until the tailgatebegins to open.
• By pressing and holding the buttonon the remote key until the tailgate beginsto open.
• By pulling the outer handle on the tailgate.
The taillights illuminate automatically when theautomatic open function is used.
05 During your trip
Loading
05
212
CAUTION
Be sure that there is adequate space aboveand behind the vehicle before opening thetailgate automatically.
The vehicle should not be driven or movedwith the tailgate in the open position. How-ever, if the vehicle is moved with the tailgatein the open position, the automatic closingfunction will be inoperative until one of thefollowing occurs:
• The tailgate is closed manually
• The ignition is switched off and the keyis removed for approximately 10minutes (the tailgate will function againafter restart).
NOTE
If the tailgate has been opened and closedcontinuously for more than 90 seconds, theautomatic function will be deactivated toavoid overloading the electrical system. Theautomatic function can be used again afterapproximately 10 minutes.
Automatic closing
The power tailgate can be closed by pressing
the button on the tailgate (see the illus-tration) or by pressing it down.
NOTE
If the tailgate is pressed down e.g., by theweight of snow or strong wind, it will closeautomatically.
WARNING
Be sure that no one is near the tailgate whenit is opened or closed automatically. Thetailgate should never be obstructed in anyway when it is operated.
Interrupting automatic opening/closing
Automatic opening or closing the tailgate canbe interrupted in four ways:
• By pressing the button on thelighting panel.
• By pressing the button on theremote key for several seconds.
• By pressing the button on the lower edgeof the tailgate.
• By pulling the outer handle on the tailgatea second time.
If one of these actions is taken:
• While the tailgate is being opened, theelectrical function will be switched off and
the tailgate will be released from the elec-trical system.
• While the tailgate is being closed, it willreturn to the fully open position.
Pinch protection
If the tailgate is obstructed while it is beingoperated, the pinch protection function is acti-vated.
• If the tailgate is being opened, the electri-cal function will be switched off and thetailgate will be released from the electricalsystem.
• If the tailgate is being closed, it will movein the opposite direction.
Operating the tailgate manually
The power tailgate can be disconnected fromthe vehicle’s electrical system by quickly pull-ing the outer handle twice. The tailgate canthen be opened/closed manually.
Folding down the rear seat backrests
The rear seat backrests can be folded down foradditional loading space. See page 85 for infor-mation.
05 During your trip
Loading
05
��
213
Load anchoring eyelets
The load anchoring eyelets on both sides of thevehicle are used to fasten straps, etc., to helpanchor items in the cargo area.
WARNING
• Cover sharp edges on long loads to helpprevent injury to occupants. Secure theload to help prevent shifting during sud-den stops.
• Always secure large and heavy objectswith a seat belt or cargo retainingstraps.
• Always secure the load to help preventit from moving in the event of suddenstops.
• Switch off the engine, apply the parkingbrake and put the gear selector in Pwhen loading and unloading the vehicle.
Cargo area floor rails and hooks
Load secured in upper and lower hooks
The floor of the cargo compartment has railson opposite sides of the vehicle equipped withhooks for anchoring loads with straps, nets,etc.
Cleaning the rails
Dirt or other small objects that collect in therails can make moving, locking, unlocking, andremoving the hooks more difficult. Objects canbe removed from the rails with a vacuumcleaner, and the rails can be cleaned with amoist cloth.
Moving the load anchoring hooks
G01
7742
To move a hook, fold it down in the direc-tion in which its opening points.
Press the hook down lightly and move it tothe desired position.
05 During your trip
Loading
05
214
Fold up the hook. It will lock in place.
NOTE
There should be at least 2 in. (50 cm)between the hooks in the rail.
WARNING
Switch off the engine, apply the parkingbrake and put the gear selector in P whenloading and unloading the vehicle.
Removing a hook
G01
8134
The load-securing hooks can easily beremoved, for example, to clean the rail.
To remove a hook, fold it down in the direc-tion in which its opening points.
Press the hook down lightly and move theit to an opening in the rail.
Pull the hook straight up.
Replace a hook in the rail in the reverse order.
NOTE
In order to return a removed hook into a rail,it must be pressed down lightly.
Reinserting a hook
G01
9581
Upper illustration: hooks correctly installed, Lowerillustration: hooks incorrectly installed
It is important to insert the hooks correctly inthe rails. The hooks' openings should pointaway from each other.
• The opening on the hook closest to the rearseat backrest should point toward thebackrest.
• The opening on the hook closest to thetailgate should point toward the tailgate.
WARNING
The hooks must be installed correctly in therail. Incorrectly installed hooks will be foldeddown by the strap, allowing them to move.The load will then no longer be securelyanchored.
Straps for securing loads
G01
9397
Securing loads
Wrapping straps a full turn around the hookshelps keep them in place.
05 During your trip
Loading
05
* Option/accessory, for more information, see Introduction. 215
NOTE
The straps should preferably be approxi-mately 1 in. (25 mm) in width.
Grocery bag holder*
G01
7745
Grocery bag holder under the floor of the cargoarea
The grocery bag holder holds shopping bagsin place.
1. Open the hatch in the floor of the cargoarea.
2. Secure the shopping bags with the strap.
Roof loads
Using load carriers
Load carriers are available as Volvo accesso-ries. Observe the following points when in use:
• To avoid damaging your vehicle and toachieve maximum safety when driving, werecommend using the load carriers thatVolvo has developed especially for yourvehicle.
• Volvo-approved removable roof racks aredesigned to carry the maximum allowableroof load for this vehicle: 220 lbs (100 kg).For non-Volvo roof racks, check the man-ufacturer's weight limits for the rack.
• Never exceed the rack manufacturer'sweigh limits and never exceed the maxi-mum rated roof load of 220 lbs (100 kg).
• Avoid single-point loads. Distribute loadsevenly.
• Place heavier cargo at the bottom of theload.
• Secure the cargo correctly with appropri-ate tie-down equipment.
• Check periodically that the load carriersand load are properly secured.
• Remember that the vehicle's center ofgravity and handling change when youcarry a load on the roof.
• The vehicle's wind resistance and fuel con-sumption will increase with the size of theload.
• Drive smoothly. Avoid rapid starts, fastcornering and hard braking.
05 During your trip
Cargo area
05
216 * Option/accessory, for more information, see Introduction.
Steel cargo grid*
G01
7748
Your vehicle can be equipped with a steel gridthat helps prevent objects in the cargo areafrom moving forward into the passenger com-partment.
Folding the grid up/down
Grasp the lowering edge of the grid and pull itrearward/upward, or push it downward/for-ward.
NOTE
If the steel grid is to be used with theoptional cargo area cover, the grid must befolded down before the cargo area cover isput in place.
Installing the steel cargo grid
In order to install the steel grid, the rear seatbackrests must be completely folded down,see page 85 for instructions.
NOTE
• The steel cargo grid is easiest to installby two people, and should be foldeddown.
• When installing the grid, the handleshould be on the front side of the grid(see illustrations – ).
• The rear seat backrests must be foldeddown when installing the steel cargogrid, see page 85.
Put the handle in the installation position,see the illustration. Press lightly on thehandle in order to turn it to this position,see the arrow.
Press in the piston toward the grid andpress it into the attachment bracket nearthe ceiling.
Turn the handle 90° . Press lightly asshown in illustration if necessary.Attach the grid by moving the handle90°.
Do the same on the opposite side of thevehicle.
G01
8367
G01
8368
G01
8369
Installing the cargo grid
05 During your trip
Cargo area
05
��
* Option/accessory, for more information, see Introduction. 217
Cargo area cover*
G03
1977
G01
7749
Use
• Pull the cover over the cargo and hook itinto the holes in the rear cargo area pillars.
• To retract (roll up) the cover, release it fromthe holes and guide it toward the rear seatbackrest.
Installing the cover
1. Press the end piece on one side of thecargo area cover into the retaining bracketin the side panel of the cargo area .
2. Do the same on the opposite side .
3. Press both sides of the cover until theyclick into place . The red mark will nolonger be visible.
4. Check that both ends of the cover aresecurely locked in place.
Removing the cover
1. Press one of the end pieces of the coverinward.
2. Pull the cover carefully upward and out-ward. The other end will release automati-cally from its retaining bracket.
Folding down the cargo area cover's rear
flap
The cargo area cover's rear flap points hori-zontally when the cover is retracted (rolled up).To fold it down:
� Pull the flap slightly rearward past its sup-ports and fold it down.
NOTE
On models equipped with this cover, itshould be removed before a child seat isattached to the child restraint anchors.
Cargo net*
Storage compartment for the cargo net
Two cassettes containing nylon cargo nets arestored in a compartment under the cargo areafloor.
05 During your trip
Cargo area
05
218
Attaching the cassette(s)
The two-sections of the net are attached to therear side of the rear seat backrest. The cas-settes have different widths, and the widestsection should be mounted on the right side(seen from the rear of the vehicle).
1. Fold down the rear seat backrests.
2. Align the cassette’s mounting rail abovethe mounting brackets on the backrest
.
3. Slide the cassette onto the mountingbrackets .
4. Return the backrest to the upright position.
Using the net(s)
G01
8246
With the backrests upright
The net is pulled up from the cassette and locksin position after approximately 1 minute.
Pull up the right side of the net by graspingits strap.
Insert the net’s rod in the retaining bracketon the right side near the ceiling and pressit forward. It will click into place.
Extend the left section of the rod and insertit in the bracket on the left side of the cargocompartment. Press it forward until it clicksinto place.
Pull up the left side of the cargo net andsecure it on the rod.
NOTE
• The net can be fastened in the sameway if the rear seat backrests are foldeddown. In this case, use the retainingbrackets near the ceiling, above thefront seats.
• The front passenger's seat backrestcan also be folded down for carryinglong objects, see page 81.
Removing the cargo net cassettes
1. Retract the net(s) in the reverse order.
2. Fold the entire rear seat backrest down.
3. Slide the cassettes outward until theyrelease from the mounting brackets.
WARNING
• When not in use, return the cassettes totheir storage compartment under thecargo area floor.
• Objects in the cargo area should besecurely anchored, even if the cargo netis correctly installed and in use.
05 During your trip
Cargo area
05
219
Using the cargo net with the cargo area
cover
G01
8247
Straps for pulling up the net
The cargo net(s) can also be pulled up from thebackrest when the cargo area cover is pulledout.
The straps for pulling up the cargo net arelocated at the arrows in the illustration. Followthe same procedure as for using the nets withthe backrests upright.
05 During your trip
Towing a trailer
05
220
Introduction
Volvo recommends the use of Volvo trailerhitches that are specially designed for the vehi-cle.
NOTE
See page 295 for the maximum trailer andtongue weights recommended by Volvo.
• Observe the legal requirements of thestate/province in which the vehicles are
• All Volvo models are equipped withenergy-absorbing shock-mounted bump-ers. Trailer hitch installation should notinterfere with the proper operation of thisbumper system.
Trailer towing does not normally present anyparticular problems, but take into considera-tion:
• Increase tire pressure to recommended fullpressure. See the tire inflation tablesbeginning on page 231.
• When your vehicle is new, avoid towingheavy trailers during the first 620 miles(1,000 km).
• Maximum speed when towing a trailer:50 mph (80 km/h).
• Engine and transmission are subject toincreased loads. Therefore, engine coolanttemperature should be closely watched
when driving in hot climates or hilly terrain.Use a lower gear and turn off the air con-ditioner if the temperature gauge needleenters the red range.
• If the automatic transmission begins tooverheat, a message will be displayed inthe text window.
• Avoid overload and other abusive opera-tion.
• Hauling a trailer affects handling, durabil-ity, and economy.
• It is necessary to balance trailer brakeswith the towing vehicle brakes to provide asafe stop (check and observe state/localregulations).
• Do not connect the trailer's brake systemdirectly to the vehicle's brake system.
• More frequent vehicle maintenance isrequired.
• Remove the ball and drawbar assemblywhen the hitch is not being used.
• Volvo recommends the use of syntheticengine oil when towing a trailer over longdistances or in mountainous areas.
WARNING
• Bumper-attached trailer hitches mustnot be used on Volvos, nor shouldsafety chains be attached to thebumper.
• Trailer hitches attaching to the vehiclerear axle must not be used.
• Never connect a trailer's hydraulicbrake system directly to the vehiclebrake system, nor a trailer's lightingsystem directly to the vehicle lightingsystem. Consult your nearest author-ized Volvo retailer for correct installa-tion.
• When towing a trailer, the trailer's safetywire must be correctly fastened to thehole or hook provided in the trailer hitchon the vehicle. The safety wire shouldnever be fastened to or wound aroundthe drawbar ball.
05 During your trip
Towing a trailer
05
221
NOTE
• When parking the vehicle with a traileron a hill, apply the parking brake beforeputting the gear selector in P. Alwaysfollow the trailer manufacturer's recom-mendations for wheel chocking.
• When starting on a hill, put the gearselector in D before releasing the park-ing brake. See also page 117 for moredetailed information about starting offon a hill while towing a trailer.
• If you use the manual (Geartronic) shiftpositions while towing a trailer, makesure the gear you select does not puttoo much strain on the engine (using toohigh a gear).
• The drawbar assembly/trailer hitch maybe rated for trailers heavier than thevehicle is designed to tow. Pleaseadhere to Volvo's recommended trailerweights.
• Avoid driving with a trailer on inclines ofmore than 15 %.
Trailer cable
An adapter is required if the vehicle's trailerhitch has a 13-pin connector and the trailer has7 pins. Use an adapter cable approved byVolvo. Make sure the cable does not drag onthe ground.
Detachable trailer hitch (accessory)
A
C
EDB
G01
0496
Ball holder
Locking bolt
Cotter pin
Hitch assembly
Safety wire attachment
Installing the ball holder
1. If necessary, remove the cotter pin fromthe locking bolt and slide the locking boltout of the hitch assembly.
2. Slide the ball holder into the hitch assem-bly.
3. Align the hole in the ball holder with the onein the hitch assembly.
4. Slide the locking bolt through the hitchassembly/ball holder.
5. Insert the cotter pin in the hole at the endof the locking bolt.
Removing the ball holder
1. Remove the cotter pin from the locking boltand slide the locking bolt out of the ballholder/hitch assembly.
2. Pull the ball holder out of the hitch assem-bly.
NOTE
A cover for the hitch assembly is alsoincluded in the kit.
05 During your trip
Emergency towing
05
222
Towing eyelet
G01
7464
Location of the towing eyelet
Attaching the towing eyelet
Attaching the towing eyelet
The towing eyelet is located under the floorof the cargo area, with the spare tire. Thiseyelet must be screwed into the positionsprovided on the right sides of either thefront or rear bumper (see illustration).
There are two different types of covers overthe openings for the towing eyelet and theyhave to be opened differently.
• If the cover has a notch, insert a coin,etc., into the notch and pry open theedge of the cover. Open the cover com-pletely and remove it.
• If the cover has a mark along one edgeor in a corner, press the mark while pry-ing out the opposite side/corner using acoin, etc. Open the cover and remove it.
Screw the towing eyelet in place, first by handand then using the tire iron until it is securely inplace.
After the vehicle has been towed, the eyeletshould be removed and returned to its storagelocation.
Press the cover for the attachment point backinto position.
NOTE
On certain models equipped with a trailerhitch, the towing eyelet cannot be screwedinto the hole in the rear bumper. The towingrope should be attached to the trailer hitchinstead. For this reason, the detachablesection of the trailer hitch should be safelystowed in the vehicle at all times.
CAUTION
If the vehicle is being towed on a flat bedtruck, the towing eyelets must not be usedto pull the vehicle up onto the flat bed.
WARNING
• Remember that the power brakes andpower steering will not function whenengine is not running. The braking andsteering systems will function but con-siderably higher pressure will berequired on the brake pedal and greatersteering effort must be exerted.
• The towing eyelets must not be used forpulling the vehicle out of a ditch or forany similar purpose involving severestrain. Do not use the towing eyelets topull the vehicle up onto a flat bed towtruck.
Precautions when the vehicle is in tow
• Attach jumper cables (see page 109) toprovide current for releasing the optionalelectric parking brake and to move the gearselector from the P position.
• The gear selector must be in position N.
• Maximum speed: 50 mph (80 km/h). Do notexceed the maximum allowable towingspeed.
05 During your trip
Emergency towing
05
223
• Maximum distance with front wheels onground: 50 miles (80 km).
• While the vehicle is being towed, try tokeep the tow rope taut at all times.
• The vehicle should only be towed in theforward direction.
WARNING
The ignition key should always be fullyinserted in the ignition slot when the vehicleis being towed to help prevent the steeringwheel from locking.
On vehicles with the optional keyless drive,the remote key must be in the passengercompartment and the driver's door must beclosed.
NOTE
During towing, ignition mode II should beused so that the lighting can be switched on.
CAUTION
Vehicles with AWD (All Wheel Drive) with thefront wheels off the ground should not betowed at speeds above 50 mph (70 km/h) orfor distances longer than 30 miles (50 km).
CAUTION
• Please check with state and localauthorities before attempting this typeof towing, as vehicles being towed aresubject to regulations regarding maxi-mum towing speed, length and type oftowing device, lighting, etc.
• If the vehicle's battery is dead, do notattempt to start the vehicle by pushingor pulling it as this will damage thethree-way catalytic converter(s). Theengine must be jump started using anauxiliary battery (see page 109).
• If the vehicle is being towed on a flat bedtruck, the towing eyelets must not beused to pull the vehicle up onto the flatbed or to secure the vehicle on the flatbed. Consult the tow truck operator.
Towing vehicles with front wheel drive/
All Wheel Drive
Volvo recommends the use of flat bed equip-ment.
• If wheel lift equipment must be used,please use extreme caution to help avoiddamage to the vehicle. In this case, the
vehicle should be towed with the rear
wheels on the ground if at all possible.
• If it is absolutely necessary to tow the vehi-cle with the front wheels on the ground,
please refer to the towing information onpage 222.
CAUTION
• Sling-type equipment applied at thefront will damage radiator and air con-ditioning lines.
• It is equally important not to use sling-type equipment at the rear or apply lift-ing equipment inside the rear wheels;serious damage to the rear axle mayresult.
• If the vehicle is being towed on a flat bedtruck, the towing eyelets must not beused to secure the vehicle on the flatbed. Consult the tow truck operator.
224
General information .............................................................................. 226Tire inflation........................................................................................... 229Inflation pressure—U.S. models .......................................................... 231Inflation pressure—Canadian models................................................... 232Tire designations .................................................................................. 233Glossary of tire terminology ................................................................. 235Vehicle loading ..................................................................................... 236Uniform Tire Quality Grading ............................................................... 238Snow chains, snow tires, studded tires ............................................... 239Temporary Spare ................................................................................. 240Tire Sealing System.............................................................................. 241Changing a wheel ................................................................................ 247Tire Pressure Monitoring System (TPMS)............................................. 250
06 Wheels and tires
General information
06
226
Introduction
Your vehicle is equipped with tires accordingto the vehicle's tire information placard on theB-pillar (the structural member at the side ofthe vehicle, at the rear of the driver's dooropening).
CAUTION
Some Volvo models are equipped with anUltra High Performance tire and wheel com-bination designed to provide maximum drypavement performance with considerationfor hydroplaning resistance. They may bemore susceptible to road hazard damageand, depending on driving conditions, mayachieve a tread life of less than 20,000 miles(30,000 km). Even if this vehicle is equippedwith Volvo’s advanced AWD or DSTC sys-tem, these tires are not designed for winterdriving, and should be replaced with wintertires when weather conditions dictate.
The tires have good road holding characteris-tics and offer good handling on dry and wetsurfaces. It should be noted however that thetires have been developed to give these fea-tures on snow/ice-free surfaces.
Most models are equipped with "all-season"tires, which provide a somewhat higher degreeof road holding on slippery surfaces than tires
without the "all-season" rating. However, foroptimum road holding on icy or snow-coveredroads, we recommend suitable winter tires onall four wheels.
When replacing tires, be sure that the new tiresare the same size designation, type (radial) andpreferably from the same manufacturer, on allfour wheels. Otherwise there is a risk of alteringthe car's roadholding and handling characte-ristics.
New Tires
Remember that tires are perishable goods. Asof 2000, the manufacturing week and year(Department of Transportation (DOT) stamp)will be indicated with 4 digits (e.g., 1510 meansthat the tire illustrated was manufactured dur-ing week 15 of 2010).
Tire age
Tires degrade over time, even when they arenot being used. It is recommended that tiresgenerally be replaced after 6 years of normalservice. Heat caused by hot climates, frequenthigh loading conditions or Ultra Violet (U.V.)exposure can accelerate the aging process.The temporary spare1 should also be replacedat 6-year intervals, even if it has never beenused.
A tire's age can be determined by the DOTstamp on the sidewall (see the illustration).
A tire with e.g., visible cracks or discolorationshould be replaced immediately.
Improving tire economy
• Maintain correct tire pressure. See the tireinflation tables beginning on page 231.
• Drive smoothly: avoid fast starts, hardbraking and tire screeching.
• Tire wear increases with speed.
• Correct front wheel alignment is veryimportant.
• Unbalanced wheels impair tire economyand driving comfort.
• Tires must maintain the same direction ofrotation throughout their lifetime.
1 Option or accessory on some models
06 Wheels and tires
General information
06
��
227
• When replacing tires, the tires with themost tread should be mounted on the rearwheels to reduce the chance of oversteerduring hard braking.
• Hitting curbs or potholes can damage thetires and/or wheels permanently.
Summer and winter tires
G02
1778
The arrows shows the direction of rotation of thetire
• When switching between summer andwinter tires, mark the tires to indicatewhere they were mounted on the car, e.g.,LF = left front, RR = right rear
• Tires with tread designed to roll in only onedirection are marked with an arrow on thesidewall.
• Incorrectly mounted tires impair the car'sbraking properties and ability to forceaside rain, snow and slush.
• The tires with the most tread should alwaysbe at the rear (to reduce the risk of skid-ding).
• Contact a Volvo workshop if you areunsure about the tread depth.
Storing wheels and tires
When storing complete wheels (tires mountedon rims), they should be suspended off thefloor or placed on their sides on the floor.
Tires not mounted on rims should be stored ontheir sides or standing upright, but should notbe suspended.
CAUTION
Tires should preferably be stored in a cool,dry, dark place, and should never be storedin close proximity to solvents, gasoline, oils,etc.
WARNING
• The wheel and tire sizes for your Volvoare specified to meet stringent stabilityand handling requirements. Unap-proved wheel/tire size combinationscan negatively affect your vehicle's sta-bility and handling.
• Any damage caused by installation ofunapproved wheel/tire size combina-tions will not be covered by your newvehicle warranty. Volvo assumes noresponsibility for death, injury, orexpenses that may result from suchinstallations.
Tire wear
Tire rotation
Tire wear is affected by a number of factorssuch as tire inflation, ambient temperature,driving style, etc. Your vehicle is driven mainlyby the front tires, which will wear faster.
If the tires are rotated, they should only bemoved from front to back or vice versa. Theyshould never be rotated left to right/right to left.
However, tire rotation, done at the recom-mended intervals, is one way of helping to keeptread wear as even as possible and will helpyou get maximum mileage from your tires.
06 Wheels and tires
General information
06
228
Ideally, tire rotation should be done the firsttime after approximately 3,000 miles(5, 000 km) and thereafter at 6,000 mile(10,000 km) intervals.
Tire rotation should only be performed if front/rear tire wear is fairly even and tread height isabove 1/16" (1.6 mm).
NOTE
Tire rotation is not included in regularlyscheduled maintenance and is performedonly at customer request, at additionalcharge.
Your Volvo retailer can also provide guidancebased on your particular driving circumstan-ces.
Tread wear indicator
G02
1829
The tires have wear indicator strips runningacross or parallel to the tread. The letters TWI
are printed on the side of the tire. Whenapproximately 1/16" (1.6 mm) is left on thetread, these strips become visible and indicatethat the tire should be replaced. Tires with lessthan 1/16" (1.6 mm) tread offer very poor trac-tion.
When replacing worn tires, it is recommendedthat the tire be identical in type (radial) and sizeas the one being replaced. Using a tire of thesame make (manufacturer) will prevent altera-tion of the driving characteristics of the vehicle.
06 Wheels and tires
Tire inflation
06
��
229
Inflation placard
G03
2521
Tire inflation placard
Tire inflation
Check tire inflation pressure regularly.
See the tire inflation tables beginning on page231. A tire inflation pressure placard is alsolocated on the driver's side B-pillar (the struc-tural member at the side of the vehicle, at therear of the driver's door opening). This placardindicates the designation of the factory-moun-ted tires on your vehicle, as well as load limitsand inflation pressure.
NOTE
• The placards shown indicate inflationpressure for the tires installed on thevehicle at the factory only.
• A certain amount of air seepage fromthe tires occurs naturally and tire pres-sure fluctuates with seasonal changesin temperature. Always check tire pres-sure regularly.
• Use a tire gauge to check the tire inflationpressure, including the spare, at least oncea month and before long trips. You arestrongly urged to buy a reliable tire pres-sure gauge, as automatic service stationgauges may be inaccurate.
• Use the recommended cold inflation pres-sure for optimum tire performance andwear.
• Under-inflation or over-inflation may causeuneven treadwear patterns.
NOTE
A certain amount of air seepage from thetires occurs naturally and tire pressure fluc-tuates with seasonal changes in tempera-ture. Always check tire pressure regularly.
WARNING
• Under-inflation is the most commoncause of tire failure and may result insevere tire cracking, tread separation,or "blow-out," with unexpected loss ofvehicle control and increased risk ofinjury.
• Under-inflated tires reduce the load car-rying capacity of your vehicle.
When weather temperature changes occur, tireinflation pressures also change. A 10-degreetemperature drop causes a correspondingdrop of 1 psi (7 kPa) in inflation pressure. Checkyour tire pressures frequently and adjust themto the proper pressure, which can be found onthe vehicle's tire information placard or certifi-cation label.
Checking tire pressure
Cold tires
Inflation pressure should be checked when thetires are cold.
The tires are considered to be cold when
they have the same temperature as the sur-
rounding (ambient) air.
This temperature is normally reached after thevehicle has been parked for at least 3 hours.
06 Wheels and tires
Tire inflation
06
230
After driving a distance of approximately1 mile (1.6 km), the tires are considered to behot. If you have to drive farther than this dis-tance to pump your tire(s), check and recordthe tire pressure first and add the appropriateair pressure when you get to the pump.
If checking tire pressure when the tire is hot,never "bleed" or reduce air pressure. The tiresare hot from driving and it is normal for pres-sures to increase above recommended coldpressures. A hot tire at or below recommendedcold inflation pressure could be significantlyunder-inflated.
To check inflation pressure:
1. Remove the cap from the valve on one tire,then firmly press the tire gauge onto thevalve.
2. Add air to reach the recommended airpressure.
3. Replace the valve cap.
4. Repeat this procedure for each tire, includ-ing the spare.
5. Visually inspect the tires to make sure thereare no nails or other objects embeddedthat could puncture the tire and cause anair leak.
6. Check the sidewalls to make sure there areno gouges, cuts, bulges or other irregular-ities.
NOTE
• If you overfill the tire, release air bypushing on the metal stem in the centerof the valve. Then recheck the pressurewith your tire gauge.
• Some spare tires require higher inflationpressure than the other tires. Consultthe tire inflation tables or see the infla-tion pressure placard.
Tire ratings
Speed ratings
The speed ratings in the table translate as fol-low:
Speed ratings
M 81 mph (130 km/h)
Q 100 mph (160 km/h)
T 118 mph (190 km/h)
H 130 mph (210 km/h)
V 149 mph (240 km/h)
Speed ratings
W 168 mph (270 km/h)
Y 186 mph (300 km/h)
Load ratings
See page 233 for an explanation of the loadrating on the sidewall of the tire.
06 Wheels and tires
Inflation pressure—U.S. models
06
231
Tire inflation pressure table
The following tire pressures are recommended by Volvo for your vehicle. Refer to the tire inflation placard (see page 229 for its location) for informationspecific to the tires installed on your vehicle at the factory.
Tire size Cold tire pressure for up to 5 persons
Front
psi/kPa
Rear
psi/kPa
215/65 R16
235/55 R17
235/50 R18
36/250 36/250
235/45 R19 39/270 39/270
Temporary spare tire 61/420 61/420
06 Wheels and tires
Inflation pressure—Canadian models
06
232
Tire inflation pressure table
The following tire pressures are recommended by Volvo for your vehicle. Refer to the tire inflation placard (see page 229 for its location) for informationspecific to the tires installed on your vehicle at the factory.
Tire size Cold tire pressure for up to 5 persons Optional tire pressure for up to 3 persons
Front
psi/kPa
Rear
psi/kPa
Front
psi/kPa
Rear
psi/kPa
215/65 R16
235/55 R17
235/50 R18
38/260 38/260 36/250 36/250
235/45 R19 39/270 39/270 39/270 39/270
Temporary spare tire 61/420 61/420 61/420 61/420
06 Wheels and tires
Tire designations
06
��
233
Information on the sidewall
310
11
12
4
5 6 7 89
2
1G
0107
53
Federal law mandates that tire manufacturersplace standardized information on the sidewallof all tires (see the illustration).
The following information is listed on the tiresidewall:
The tire designation:
NOTE
Please be aware that the following tire des-ignation is an example only and that thisparticular tire may not be available on yourvehicle.
1. 215: the width of the tire (in millimeters)from sidewall edge to sidewall edge. Thelarger the number, the wider the tire.
2. 65: The ratio of the tire's height to its widthin percent.
3. R: Radial tire.
4. 15: The diameter of the wheel rim (ininches).
5. 95: The tire's load index. In this example, aload index of 95 equals a maximum load of1521 lbs (690 kg).
6. H: The tire's speed rating, or the maximumspeed at which the tire is designed to bedriven for extended periods of time, carry-ing a permissible load for the vehicle, andwith correct inflation pressure. For exam-ple, H indicates a speed rating of 130 mph(210 km/h).
NOTE
The tire's load index and speed rating maynot appear on the sidewall because they arenot required by law.
7. M+S or M/S = Mud and Snow, AT = AllTerrain, AS = All Season
8. U.S. DOT Tire Identification Number
(TIN): This begins with the letters "DOT"and indicates that the tire meets all federalstandards. The next two numbers or lettersare the plant code where it was manufac-tured, the next two are the tire size codeand the last four numbers represent theweek and year the tire was built. For exam-ple, 1510 means that the tire was manu-factured during week 15 of 2010. The num-bers in between are marketing codes usedat the manufacturer's discretion. This infor-mation helps a tire manufacturer identify atire for safety recall purposes.
9. Tire Ply Composition and Material
Used: Indicates the number of plies indi-cates or the number of layers of rubber-coated fabric in the tire tread and sidewall.Tire manufacturers also must indicate theply materials in the tire and the sidewall,which include steel, nylon, polyester, andothers.
10. Maximum Load: Indicates the maximumload in pounds and kilograms that can becarried by the tire. Refer to the vehicle's tireinformation placard located on the B-Pillarfor the correct tire pressure for your vehi-cle.
06 Wheels and tires
Tire designations
06
234
11. Treadwear, Traction, and Temperature
grades: see page 238 for more informa-tion.
12. Maximum permissible inflation
pressure: the greatest amount of air pres-sure that should ever be put in the tire. Thislimit is set by the tire manufacturer.
06 Wheels and tires
Glossary of tire terminology
06
235
Terms
The tire suppliers may have additional mark-ings, notes or warnings such as standard load,radial tubeless, etc.
• Tire information placard: A placardshowing the OE (Original Equipment) tiresizes, recommended inflation pressure,and the maximum weight the vehicle cancarry.
• Tire Identification Number (TIN): A num-ber on the sidewall of each tire providinginformation about the tire brand and man-ufacturing plant, tire size and date of man-ufacturer.
• Inflation pressure: A measure of theamount of air in a tire.
• Standard load: A class of P-metric or Met-ric tires designed to carry a maximum loadat 35 psi [37 psi (2.5 bar) for Metric tires].Increasing the inflation pressure beyondthis pressure will not increase the tires loadcarrying capability.
• Extra load: A class of P-metric or Metrictires designed to carry a heavier maximumload at 41 psi [43 psi (2.9 bar) for Metrictires]. Increasing the inflation pressurebeyond this pressure will not increase thetire's load carrying capability.
• kPa: Kilopascal, a metric unit of air pres-sure.
• PSI: Pounds per square inch, a standardunit of air pressure.
• B-pillar: The structural member at the sideof the vehicle behind the front door.
• Bead area of the tire: Area of the tire nextto the rim.
• Sidewall of the tire: Area between thebead area and the tread.
• Tread area of the tire: Area of the perim-eter of the tire that contacts the road whenmounted on the vehicle.
• Rim: The metal support (wheel) for a tire ora tire and tube assembly upon which thetire beads are seated.
• Maximum load rating: a figure indicatingthe maximum load in pounds and kilo-grams that can be carried by the tire. Thisrating is established by the tire manufac-turer.
• Maximum permissible inflation
pressure: the greatest amount of air pres-sure that should ever be put in the tire. Thislimit is set by the tire manufacturer.
• Recommended tire inflation pressure:inflation pressure, established by Volvo,which is based on the type of tires that aremounted on a vehicle at the factory. Thisinformation can be found on the tire infla-tion placard(s) located on the driver's side
B-pillar and in the tire inflation table in thischapter.
• Cold tires: The tires are considered to becold when they have the same temperatureas the surrounding (ambient) air. This tem-perature is normally reached after the vehi-cle has been parked for at least 3 hours.
06 Wheels and tires
Vehicle loading
06
236
Loads
Properly loading your vehicle will provide maxi-mum return of vehicle design performance.
Before loading your vehicle, familiarize yourselfwith the following terms for determining yourvehicle's weight ratings, with or without atrailer, from the vehicle's Federal/CanadianMotor Vehicle Safety Standards (FMVSS/CMVSS) label, and the vehicle's tire informa-tion placard:
Curb weight
The weight of the vehicle including a full tankof fuel and all standard equipment. It does notinclude passengers, cargo, or optional equip-ment.
Capacity weight
All weight added to the curb weight, includingcargo and optional equipment. When towing,trailer hitch tongue load is also part of cargoweight.
NOTE
For trailer towing information, please refer tothe section "Towing a trailer" on page 220.
Permissible axle weight
The maximum allowable weight that can becarried by a single axle (front or rear). Thesenumbers are shown on the Federal/CanadianMotor Vehicle Safety Standards (FMVSS/CMVSS) label. The total load on each axle mustnever exceed its maximum permissible weight.
Gross vehicle weight (GVW)
The vehicle's curb weight + cargo + passen-gers.
NOTE
• The location of the various labels in yourvehicle can be found on page 292.
• A table listing important weight limits foryour vehicle can be found on page295.
Steps for Determining Correct Load
Limit
1. Locate the statement "the combinedweight of occupants and cargo shouldnever exceed XXX pounds" on your vehi-cle's placard.
2. Determine the combined weight of thedriver and passengers that will be riding inyour vehicle.
3. Subtract the combined weight of the driverand passengers from XXX kilograms orXXX pounds.
4. The resulting figure equals the availableamount of cargo and luggage loadcapacity. For example, if the "XXX" amountequals 1400 lbs. and there will be five150 lb. passengers in your vehicle, theamount of available cargo and luggageload capacity is 650 lbs. (1400 – 750(5 × 150) = 650 lbs.)
5. Determine the combined weight of luggageand cargo being loaded on the vehicle.That weight may not safely exceed theavailable cargo and luggage load capacitycalculated in Step 4.
6. If your vehicle will be towing a trailer, loadfrom your trailer will be transferred to yourvehicle. Consult this manual1 to determinehow this reduces the available cargo andluggage load capacity of your vehicle.
1 220.
06 Wheels and tires
Vehicle loading
06
237
WARNING
• Exceeding the permissible axle weight,gross vehicle weight, or any otherweight rating limits can cause tire over-heating resulting in permanent defor-mation or catastrophic failure.
• Do not use replacement tires with lowerload carrying capacities than the tiresthat were original equipment on thevehicle because this will lower the vehi-cle's GVW rating. Use only tires with thecorrect load carrying capacity. Consultyour Volvo retailer for information.
06 Wheels and tires
Uniform Tire Quality Grading
06
238
Quality grading information
ALL PASSENGER VEHICLE TIRES MUST
CONFORM TO FEDERAL SAFETY
REQUIREMENTS IN ADDITION TO THESE
GRADES
Quality grades can be found, where appli-
cable, on the tire sidewall between the tread
shoulder and maximum section width. For
example:
Treadwear 200 Traction AA Temperature A
TREADWEAR
The treadwear grade is a comparative ratingbased on the wear rate of the tire when testedunder controlled conditions on a specified gov-ernment test course. For example, a tire gra-ded 150 would wear one and one half (1 1/2)times as well on the government course as atire graded 100. The relative performance oftires depends upon the actual conditions oftheir use, however, and many depart signifi-cantly from the norm due to variation in drivinghabits, maintenance practices and differencesin road characteristics and climate.
TRACTION
The traction grades, from highest to lowest, areAA, A, B, and C, as measured under controlledconditions on specified government test sur-faces of asphalt and concrete. A tire marked C
may have poor traction performance. The trac-tion grade assigned to this tire is based onbraking (straight-ahead) traction tests and isnot a measure of cornering (turning) traction.
WARNING
The traction grade assigned to this tire isbased on braking (straight-ahead) tractiontests and is not a measure of cornering(turning) traction.
TEMPERATURE
The temperature grades are A (the highest), B,and C, representing the tire's resistance to thegeneration of heat and its ability to dissipateheat when tested under controlled conditionson a specified indoor laboratory test wheel.Sustained high temperature can cause thematerial of the tire to degenerate and reducetire life, and excessive temperature can lead tosudden tire failure. The grade C correspondsto a minimum level of performance that all pas-senger vehicle tires must meet under the Fed-eral Motor Safety Standard No. 109. Grades Band A represent higher levels of performanceon the laboratory test wheel than the minimumrequired by law.
WARNING
The temperature grade for this tire is estab-lished for a tire that is properly inflated andnot overloaded. Excessive speed, under-inflation, or excessive loading, either sepa-rately or in combination, can cause heatbuildup and tire failure.
06 Wheels and tires
Snow chains, snow tires, studded tires
06
239
Winter driving conditions
Snow chains
Snow chains can be used on your Volvo withthe following restrictions:
• Snow chains should be installed on frontwheels only. Use only Volvo approvedsnow chains.
• If accessory, aftermarket or "custom" tiresand wheels are installed and are of a sizedifferent than the original tires and wheels,chains in some cases CANNOT be used.Sufficient clearances between chains andbrakes, suspension and body componentsmust be maintained.
• Some strap-on type chains will interferewith brake components and thereforeCANNOT be used.
• All Wheel Drive models: Snow chainsshould only be installed on the frontwheels.
• Certain size tires may not allow the assem-bly of snow chains/traction devices.
Consult your Volvo retailer for additional snowchain information.
CAUTION
• Check local regulations regarding theuse of snow chains before installing.
• Use single-sided snow chains only.
• Always follow the chain manufacturer'sinstallation instructions carefully. Installchains as tightly as possible andretighten periodically.
• Never exceed the chain manufacturer'sspecified maximum speed limit. (Underno circumstances should you exceed31 mph (50 km/h).
• Avoid bumps, holes or sharp turnswhen driving with snow chains.
• The handling of the vehicle can beadversely affected when driving withchains. Avoid fast or sharp turns as wellas locked wheel braking.
Snow tires, studded tires1
Tires for winter use:
• Owners who live in or regularly commutethrough areas with sustained periods ofsnow or icy driving conditions are stronglyadvised to fit suitable winter tires to helpretain the highest degree of traction.
• It is important to install winter tires on allfour wheels to help retain traction during
cornering, braking, and accelerating. Fail-ure to do so could reduce traction to anunsafe level or adversely affect handling.
• Do not mix tires of different design as thiscould also negatively affect overall tire roadgrip.
• Winter tires wear more quickly on dry roadsin warm weather. They should be removedwhen the winter driving season has ended.
• Studded tires should be run-in300 – 600 miles (500 – 1000 km) duringwhich the vehicle should be driven assmoothly as possible to give the studs theopportunity to seat properly in the tires.The tires should have the same rotationaldirection throughout their entire lifetime.
NOTE
Please consult state or provincial regula-tions restricting the use of studded wintertires before installing such tires.
1 Where permitted
06 Wheels and tires
Temporary Spare
06
240
Spare tire
The spare tire in your vehicle1 is called a "Tem-porary Spare".
Recommended tire pressure (see the placardon the B-pillar or on the fuel filler door) shouldbe maintained irrespective of which position onthe vehicle the temporary spare tire is used on.
In the event of damage to this tire, a new onecan be purchased from your Volvo retailer.
WARNING
Current legislation prohibits the use of the"Temporary Spare" tire other than as a tem-porary replacement for a punctured tire. Itmust be replaced as soon as possible by astandard tire. Road holding and handlingmay be affected with the "TemporarySpare" in use. Do not exceed 50 mph(80 km/h).
CAUTION
The vehicle must not be driven with wheelsof different dimensions or with a spare tireother than the one that came with the vehi-cle. The use of different size wheels canseriously damage your car's transmission.
1 Not on models equipped with the Tire sealing system.
06 Wheels and tires
Tire Sealing System
06
��
* Option/accessory, for more information, see Introduction. 241
Location
Introduction
Certain models are equipped with a tire sealingsystem* that enables you to temporarily seal ahole in the tread surface and re-inflate a flat tire,or to adjust a tire’s inflation pressure.
The system consists of an air compressor, acontainer for the sealing compound, wiring toconnect the system to the vehicle’s electricalsystem via one of the 12-volt sockets, and ahose used to connect the system to the tire’sinflation valve.
The 12-volt sockets are located in the fronttunnel console, on the rear side of the centerconsole in the rear seat and in the cargoarea*, see page 198.
Accessing the tire sealing system
The tire sealing system is stowed under thefloor of the cargo area. To access it:
1. Lift the floor hatch in the cargo area.2. Lift out the tire sealing system.
NOTE
• The tire sealing system is only intendedto seal holes on the tire’s tread area, notthe sidewall.
• Tires with large holes or tears cannot berepaired with the tire sealing system.
• After use, stow the tire sealing systemproperly to help prevent rattling.
WARNING
• After using the tire sealing system, thevehicle should not be driven farther thanapproximately 120 miles (200 km).
• Have the tire inspected by a trained andqualified Volvo service technician assoon as possible to determine if it canbe permanently repaired or must bereplaced.
• The vehicle should not be driven fasterthan 50 mph (80 km/h) while using a tirethat has been temporarily repaired withthe tire sealing system.
• After using the tire sealing system, drivecarefully and avoid abrupt steeringmaneuvers and sudden stops.
06 Wheels and tires
Tire Sealing System
06
242
Tire sealing system–overview
Speed limit sticker
On/Off switch
Electrical wire
Bottle holder (orange cover)
Protective hose cover
Air release knob
Hose
Bottle with sealing compound
Air pressure gauge
WARNING
Please keep the following points in mindwhen using the tire sealing system:
• The sealing compound bottle (no. 8 inthe illustration) contains 1.2-Ethanoland natural rubber-latex. These sub-stances are harmful if swallowed.
• The contents of this bottle may causeallergic skin reactions or otherwise bepotentially harmful to the skin, the cen-tral nervous system, and the eyes.
Precautions:
• Keep out of reach of children.
• Do not ingest the contents.
• Avoid prolonged or repeated contactwith the skin.
• Hands should be washed thoroughlyafter handling.
First aid:
• Skin: Wash affected areas of skin withsoap and water. Get medical attentionif symptoms occur.
• Eyes: Flush with plenty of water for least15 minutes, occasionally lifting theupper and lower eyelids. Get medicalattention if symptoms occur.
• Inhalation: Move the person to fresh air.If irritation persists, get medical atten-tion.
Tire sealing system–temporarilyrepairing a flat tire
G01
4338
Temporarily repairing a flat tire is done in twostages:
06 Wheels and tires
Tire Sealing System
06
��
243
• Stage 1: The hole is sealed by pumpingsealing compound into the tire. The car isthen driven a short distance to distributethe sealing compound in the tire.
NOTE
Do not remove any foreign objects (nails,etc.) from the tire before using the sealingsystem.
• Stage 2: The tire’s inflation pressure ischecked and adjusted if necessary.
WARNING
• Never leave the tire sealing systemunattended when it is operating.
• Keep the tire sealing system away fromchildren.
• Be sure the vehicle is parked safely offthe road and away from moving traffic.
• Apply the parking brake.
Stage 1: Sealing the hole
1. Open the cover on the tire sealing kit.
2. Peel off the speed limit sticker and affix itto the steering wheel hub where it will beclearly visible to the driver.
3. Ensure that the on/off switch is in posi-tion 0 (the 0 side of the switch should bepressed down).
WARNING
Contact with the sealing compound maycause skin irritation. If contact occurs, washthe affected area immediately with soap andwater.
4. Unscrew the orange cover over the bottleholder and unscrew the cap on the bottleof sealing compound.
NOTE
Do not break the seal on the bottle. Thisoccurs automatically when the bottle isscrewed into the holder.
5. Screw the bottle into the bottle holder.
WARNING
The bottle is equipped with a catch to keepit securely in place and help prevent sealingcompound leakage. Once in place, the bot-tle cannot be unscrewed. This must be doneby a trained and qualified Volvo servicetechnician.
6. Remove the valve cap from the tire’s infla-tion valve and screw the tire sealing sys-tem’s hose connector onto the valve astightly as possible by hand.
7. Connect the electrical wire to the nearest12-volt socket in the vehicle.
8. Start the vehicle’s engine.
WARNING
The vehicle´s engine should be runningwhen the tire sealing system is used to avoidbattery drain. Therefore, be sure the vehicleis parked in a well ventilated place, or out-doors, before using the system.
9. Start the tire sealing system’s compressorby pressing the on/off switch to position I.
06 Wheels and tires
Tire Sealing System
06
244
WARNING
• Never stand next to the tire being inflatedwhen the compressor is in operation.
• If cracks, bubbles, etc. form on the tire,switch off the compressor immediately.
• If there is visible damage to the sidewallor the rim, the tire cannot be repaired.The vehicle should not be driven if thisoccurs. Contact a towing service orVolvo On Call Roadside Assistance ifapplicable.
NOTE
The air pressure gauge will temporarilyshow an increase in pressure to approxi-mately 88 psi (6 bar) while the sealing com-pound is being pumped into the tire. Thepressure should return to a normal levelafter approximately 30 seconds.
10. Within seven minutes, inflate the tire tobetween 22—44 psi (1.8—3.0 bar). Switchoff the compressor briefly to get a clearreading from the pressure gauge.
CAUTION
The compressor should not be used formore than 10 minutes at a time to avoidoverheating.
WARNING
If the pressure remains below 22 psi(1.8 bar) after approximately seven minutes,turn off the compressor. In this case, thehole is too large to be sealed and the vehicleshould not be driven.
11. Switch off the compressor and disconnectthe electrical wire from the 12-volt socket.
12. Unscrew the hose from the tire’s inflationvalve and reinstall the valve cap.
13. Immediately drive the vehicle for approxi-mately 2 miles (3 km) at a maximum speedof 50 mph (80 km/h) to distribute the seal-ing compound in the tire.
CAUTION
If your vehicle is equipped with the TirePressure Monitoring System (TPMS), theuse of the sealing compound may lead toincorrect tire pressure readings or in rarecases, damage to the tire pressure sensor.Use the tire sealing system to check andadjust the damaged tire's inflation pressure.
NOTE
• Safely stow the tire sealing system in aconvenient place as it will soon be usedagain to check the tire’s inflation pres-sure.
• The empty bottle of sealing compoundcannot be removed from the bottleholder. Consult a trained and qualifiedVolvo service technician to have thebottle removed and properly disposedof.
06 Wheels and tires
Tire Sealing System
06
��
245
WARNING
If heavy vibrations, unsteady steeringbehavior, or noises should occur while driv-ing, reduce speed and park the vehicle in asafe place. Recheck the tire for bumps,cracks, or other visible damage, andrecheck its inflation pressure. If the pressureis below 19 psi (1.3 bar), do not continuedriving. Have the vehicle towed to a trainedand qualified Volvo service technician.
Stage 2: Checking inflation pressure
1. Connect the tire sealing system as descri-bed in stage 1.
2. Refer to the inflation pressure tablesfor thecorrect inflation pressure. If the tire needsto be inflated, start the tire sealing system’scompressor. If necessary, release air fromthe tire by turning the air release knobcounterclockwise.
CAUTION
The compressor should not be used formore than 10 minutes at a time to avoidoverheating.
WARNING
If you interrupt your trip for more than 1hour, check the inflation pressure in thedamaged tire again before continuing.
Replacing the sealing compound
container
The sealing compound container must bereplaced if:
• the tire sealing system has been used torepair a tire
• the container’s expiration date has passed(see the date on decal).
NOTE
• After use, the sealing compound bottle,the hose, and certain other systemcomponents must be replaced. Pleaseconsult your Volvo retailer for replace-ment parts.
• If the sealing compound bottle’s expi-ration date has passed, please take it toa Volvo retailer or a recycling stationthat can properly dispose of harmfulsubstances.
Inflating tires
The tire sealing system can be used to inflatethe tires. To do so:
1. Park the car in a safe place.
2. The compressor should be switched off.Ensure that the on/off switch is in position
0 (the 0 side of the switch should bepressed down).
3. Take out the electrical wire and hose.
4. Remove the valve cap from the tire’s infla-tion valve and screw the hose connectoronto the valve as tightly as possible byhand.
5. Connect the electrical wire to the nearest12-volt socket in the vehicle.
6. Start the vehicle’s engine.
WARNING
• The vehicle’s engine should be runningwhen the tire sealing system is used toavoid battery drain. Therefore, be surethe vehicle is parked in a well ventilatedplace, or outdoors, before using the sys-tem.
• Children should never be left unattendedin the vehicle when the engine is running.
06 Wheels and tires
Tire Sealing System
06
246
7. Check the tire’s inflation pressure on thegauge. Switch off the compressor briefly toget a clear reading from the pressuregauge.
8. Refer to the tire inflation tables for the cor-rect inflation pressure. If the tire needs tobe inflated, start the tire sealing system’scompressor (press the on/off switch toposition I). If necessary, release air from thetire by turning the air release knob coun-terclockwise.
CAUTION
The compressor should not be used formore than 10 minutes at a time to avoidoverheating.
9. Turn off the compressor (press the on/offswitch to position 0) when the correct infla-tion pressure has been reached.
10. Unscrew the hose from the tire’s inflationvalve and reinstall the valve cap.
11. Disconnect the electrical wire from the12-volt socket.
06 Wheels and tires
Changing a wheel
06
��
247
Removing a wheel
G01
7464
Location of jack and tools
Spare wheel
The spare wheel (Temporary spare) is onlyintended for temporary use. Replace the sparewheel with a normal wheel as soon as possible.The car's handling may be altered by the useof the spare wheel. The correct tire pressure forthe spare wheel is stated in the tire pressuretables beginning on page 231.
The spare wheel is only intended for temporaryuse. Replace it with a normal wheel as soon aspossible. The car's handling may be altered bythe use of the spare wheel. The correct tirepressure for the spare wheel is stated in the tirepressure tables beginning on page 231.
WARNING
Current legislation prohibits the use of the“Temporary Spare” tire other than as a tem-porary replacement for a punctured tire. Itmust be replaced as soon as possible by astandard tire. Road holding and handlingmay be affected with the “TemporarySpare” in use.
CAUTION
The vehicle must never be driven with morethan one temporary spare wheel.
The spare wheel is located in the spare wheelwell with the rim side down. There are two foamblocks, one under the spare wheel and oneover/inside. The upper one contains all tools.
The same bolt runs through to secure the sparewheel and the foam blocks.
Taking out the spare wheel
1. Open the floor hatch.
2. Undo the retaining bolt.
3. Lift out the foam block with tools.
4. Lift out the spare wheel.
1. Release the bag's retaining straps.
2. Lift the bag out of the vehicle and removethe spare wheel from the bag.
3.
4. Remove the jack and tools from the foamblock and change the wheels (see theinstructions in the following section"Changing a wheel").
5. After changing wheels, return the jack andtools to the foam block and close the floorhatch.
6. If possible, place the wheel with the punc-tured tire in the bag.
7.
The other two blocks can remain in the sparewheel well.
WARNING
After use
The foam block and spare wheel must bereplaced in the reverse order. Note the arrowon the upper foam block. It should point for-ward.
06 Wheels and tires
Changing a wheel
06
248
NOTE
If the floor hatch is not completely closed,the private locking feature (see page 61) willnot function.
Changing a wheel
Removing the wheel cover
1. Apply the parking brake.
2. Put the gear selector in P.
3. Block the wheels that are on the groundwith wooden blocks or large stones.
4. Remove the wheel cover (where applica-ble) using the lug wrench in the tool bag.With the vehicle still on the ground, use thelug wrench to loosen the wheel nuts
½ – 1 turns by exerting downward pres-sure.
5. Turn the nuts counterclockwise to loosen.
6. There are two jack attachment points oneach side of the vehicle. Position the jackcorrectly in the attachment (see illustrationabove) and crank while simultaneouslyguiding the base of the jack to the ground.The base of the jack must be flat on a level,firm, non-slippery surface. Before raisingthe vehicle, check that the jack is still cor-rectly positioned in the attachment.
7. Raise the vehicle until the wheel to bechanged is lifted off the ground.
8. Unscrew the wheel nuts completely andcarefully remove the wheel so as not todamage the threads on the studs.
WARNING
• The jack must correctly engage the jackattachment.
• Be sure the jack is on a firm, level, non-slippery surface.
• Never allow any part of your body to beextended under a vehicle supported bya jack.
• Use the jack intended for the vehiclewhen changing a tire. For any other job,use stands to support the vehicle.
• Apply the parking brake and put thegear selector in the Park (P) position.
• Block the wheels standing on theground, use rigid wooden blocks orlarge stones.
• The jack should be kept well-greasedand clean, and should not be damaged.
• No objects should be placed betweenthe base of jack and the ground, orbetween the jack and the attachmentbar on the vehicle.
Re-installing the wheel
1. Clean the contact surfaces on the wheeland hub.
2. Lift the wheel and place it on the hub.
06 Wheels and tires
Changing a wheel
06
249
G02
2916
Tighten the lug nuts
3. Install the wheel nuts and tighten hand-tight. Using the lug wrench, tighten cross-wise until all nuts are snug.
4. Lower the vehicle to the ground and alter-nately tighten the bolts crosswise to103 ft. lbs. (140 Nm).
5. Install the wheel cover (where applicable).
06 Wheels and tires
Tire Pressure Monitoring System (TPMS)
06
250
Introduction
NOTE
USA – FCC ID: KR5S122780002
This device complies with part 15 of theFCC rules. Operation is subject to the fol-lowing conditions: (1) This device may notcause harmful interference, and (2) thisdevice must accept any interferencereceived, including interference that maycause undesired operation.
The tire pressure monitoring system1 uses sen-sors mounted in the tire valves to check infla-tion pressure levels. When the vehicle is mov-ing at a speed of approximately 20 mph(30 km/h) or faster, these sensors transmitinflation pressure data to a receiver located inthe vehicle.
When low inflation pressure is detected, TPMSwill light up the tire pressure warning light( ) (also referred to as a telltale) in theinstrument panel and will display one of thefollowing messages in the text window: Tire
pressure low or Tire needs air now.
NOTE
If a fault occurs in TPMS, the tire pressurewarning light will flash for approximately1 minute and Tire press. syst Servicerequired will be displayed.
Each tire, including the spare (if provided),should be checked monthly when cold andinflated to the inflation pressure recommendedby the vehicle manufacturer on the vehicleplacard or tire inflation pressure label. (If yourvehicle has tires of a different size than the sizeindicated on the vehicle placard or tire inflationpressure label, you should determine theproper tire inflation pressure for those tires.)
As an added safety feature, your vehicle hasbeen equipped with a tire pressure monitoringsystem (TPMS) that illuminates a low tire pres-sure telltale when one or more of your tires issignificantly under-inflated. Accordingly, whenthe low tire pressure telltale illuminates, youshould stop and check your tires as soon aspossible, and inflate them to the proper pres-sure. Driving on a significantly under-inflatedtire causes the tire to overheat and can lead totire failure. Under-inflation also reduces fuelefficiency and tire tread life, and may affect thevehicle's handling and stopping ability.
Please note that the TPMS is not a substitutefor proper tire maintenance, and it is the driv-er's responsibility to maintain correct tire pres-sure, even if under-inflation has not reachedthe level to trigger illumination of the TPMS lowtire pressure telltale.
Your vehicle has also been equipped with aTPMS malfunction indicator to indicate whenthe system is not operating properly. TheTPMS malfunction indicator is combined withthe low tire pressure telltale. When the systemdetects a malfunction, the telltale will flash forapproximately one minute and then remaincontinuously illuminated. This sequence willcontinue upon subsequent vehicle start-ups aslong as the malfunction exists. When the mal-function indicator is illuminated, the systemmay not be able to detect or signal low tirepressure as intended. TPMS malfunctions mayoccur for a variety of reasons, including theinstallation of replacement or alternate tires orwheels on the vehicle that prevent the TPMSfrom functioning properly. Always check theTPMS malfunction telltale after replacing oneor more tires or wheels on your vehicle toensure that the replacement or alternate tiresand wheels allow the TPMS to continue tofunction properly.
1 This system is standard on U.S. models and optional on Canadian models
06 Wheels and tires
Tire Pressure Monitoring System (TPMS)
06
��
251
NOTE
TPMS indicates low tire pressure but doesnot replace normal tire maintenance. Forinformation on correct tire pressure, pleaserefer to the Tire inflation pressure tables orconsult your Volvo retailer.
Erasing warning messages
When a low tire pressure warning message hasbeen displayed, and the tire pressure warninglight has come on:
1. Use a tire pressure gauge to check theinflation pressure of all four tires.
2. Re-inflate the tire(s) to the correct pressure(consult the tire pressure placard or theinflation pressure tables beginning on page231.
3. In certain cases, it may be necessary todrive the vehicle for several minutes at aspeed of 20 mph (30 km/h) or faster. Thiswill erase the warning text and the warninglight will go out.
WARNING
Incorrect inflation pressure could lead to tirefailure, resulting in a loss of control of thevehicle.
Changing wheels with TPMS
Please note the following when changing orreplacing the factory installed TPMS wheels/tires on the vehicle:
• Only the factory-mounted wheels areequipped with TPMS sensors in the valves.
• If the vehicle is equipped with a temporaryspare tire, this tire does not have a TPMSsensor.
• If wheels without TPMS sensors are moun-ted on the vehicle, TIRE PRESS SYSTSERVICE REQUIRED will be displayedeach time the vehicle is driven above25 mph (40 km/h) for 10 minutes or more.
• Once TPMS sensors are properly installed,the warning message should not reappear.If the message is still displayed, drive thevehicle for several minutes at a speed of20 mph (30 km/h) or faster to erase themessage.
• Volvo recommends that TPMS sensors befitted on all wheels used on the vehicle.Volvo does not recommend moving sen-sors back and forth between sets ofwheels.
CAUTION
When inflating tires with TPMS valves, pressthe pump's mouthpiece straight onto thevalve to help avoid bending or otherwisedamaging the valve.
NOTE
• If you change to tires with a differentrecommended inflation pressure, theTPMS system must be recalibrated tothese tires. On U.S. models, this mustbe done by a trained and qualified Volvoservice technician. On Canadian mod-els, see the following section "Recali-brating TPMS."
• If a tire is changed, or if the TPMS sen-sor is moved to another wheel, the sen-sor's seal, nut, and valve core should bereplaced.
• When installing TPMS sensors, thevehicle must be parked for at least15 minutes with the ignition off. If thevehicle is driven within 15 minutes, aTPMS error message will be displayed.
Recalibrating TPMS (Canadian models
only)
In certain cases, it may be necessary to reca-librate TPMS to conform to Volvo's recom-mended tire inflation pressures (see the infla-
06 Wheels and tires
Tire Pressure Monitoring System (TPMS)
06
252
tion pressure table on page 232), for example,if higher inflation pressure is necessary whentransporting heavy loads, etc.
This is done in the vehicle's menu system (seepage 124).
To recalibrate:
1. Switch off the engine.
2. Inflate the tires to the desired pressure andput the ignition in mode I or II (see page79 for additional information).
3. In the menu system, select Car settings
Tire pressure and press ENTER.
4. Select Calibrate tire pressure and pressENTER.
5. Drive the vehicle at a speed above25 mph (40 km/h) continuously for at least1 minute.> This recalibrates TPMS to the new infla-
tion pressure.
Activating/deactivating TPMS (Canadian
models only)
1. Switch off the engine.
2. Put the ignition in mode I or II (see page79 for additional information).
3. In the menu system, select Car settings
Tire pressure and press ENTER.
4. Select Tire pressure system and pressENTER.> An X is displayed if the system is acti-
vated and disappears when the systemis deactivated.
254
Volvo maintenance................................................................................ 256Maintaining your car............................................................................. 257Hood and engine compartment............................................................ 259Engine oil............................................................................................... 260Fluids..................................................................................................... 262Replacing bulbs.................................................................................... 264Wiper blades and washer fluid.............................................................. 271Battery................................................................................................... 273Fuses..................................................................................................... 276Vehicle care........................................................................................... 284
07 Maintenance and specifications
Volvo maintenance
07
256
Introduction
Volvo advises you to follow the maintenanceprogram outlined in the Warranty and ServiceRecords Information booklet. This mainte-nance program contains inspections and serv-ices necessary for the proper function of yourvehicle. The maintenance services containseveral checks that require special tools andtraining, and therefore must be performed by aqualified technician. To keep your Volvo in topcondition, specify time-tested and provenGenuine Volvo Parts and Accessories.
The Federal Clean Air Act – U.S
The Federal Clean Air Act requires vehiclemanufacturers to furnish written instructions tothe ultimate purchaser to assure the properservicing and function of the components thatcontrol emissions. These services, which arelisted in the "Warranty and Service RecordsInformation" booklet, are not covered by thewarranty. You will be required to pay for laborand material used.
Maintenance
Your Volvo passed several major inspectionsbefore it was delivered to you, in accordancewith Volvo specifications. The maintenanceprocedures outlined in the Warranty and Serv-ice Records Information booklet, many ofwhich will positively affect your vehicle's emis-sions, should be performed as indicated. It is
recommended that receipts for vehicle emis-sion maintenance be retained in case ques-tions arise concerning maintenance. Inspec-tion and maintenance should also be per-formed anytime a malfunction is observed orsuspected.
Applicable warranties – U.S/Canada
In accordance with applicable U.S. and Cana-dian regulations, the following list of warrantiesis provided.
• New Vehicle Limited Warranty
• Parts and Accessories Limited Warranty
• Corrosion Protection Limited Warranty
• Seat Belt and Supplemental Restraint Sys-tems Limited Warranty
• Emission Design and Defect Warranty
• Emission Performance Warranty
These are the federal warranties; other warran-ties are provided as required by state/provin-cial law. Refer to your separate Warranty andService Records Information booklet fordetailed information concerning each of thewarranties.
Periodic maintenance helps minimize
emissions
Periodic maintenance will help keep your vehi-cle running well. Your Warranty and ServiceRecords Information booklet provides a com-
prehensive periodic maintenance schedule upto 150,000 miles (240,000 km) of vehicle main-tenance. The schedule includes componentsthat affect vehicle emissions. This pagedescribes some of the emission-related com-ponents.
07 Maintenance and specifications
Maintaining your car
07
��
257
Owner maintenance
Periodic maintenance requirements and inter-vals are described in your vehicle's Warrantyand Service Records Information booklet.
The following points can be carried outbetween the normally scheduled maintenanceservices.
Each time the car is refueled:
• Check the engine oil level.
• Clean the windshield, windshield wipers,headlights, and tail lights.
Monthly:
• Check cold tire pressure in all tires. Inspectthe tires for wear.
• Check that engine coolant and other fluidlevels are between the indicated "min" and"max" markings.
• Clean interior glass surfaces with a glasscleaner and soft paper towels.
• Wipe driver information displays with a softcloth.
• Visually inspect battery terminals for cor-rosion. Corrosion may indicate a loose ter-minal connector, or a battery near the endof its useful service life. Consult your Volvoretailer for additional information.
As needed:
Wash the car, including the undercarriage, toreduce wear that can be caused by a buildupof dirt, and corrosion that can be caused by saltresidues.
Clean leaves and twigs from air intake vents atthe base of the windshield, and from other pla-ces where they may collect.
NOTE
Complete service information for qualifiedtechnicians is available online for purchaseor subscription at www.volvotechinfo.com.
Hoisting the vehicle
If a garage jack is used to lift the vehicle, thetwo jack attachments points should be used.
They are specially reinforced to bear the weightof the vehicle. A garage jack can also be placedunder the front of the engine support frame.Take care not to damage the splash guardunder the engine. Ensure that the jack is posi-tioned so that the vehicle cannot slide off it.Always use axle stands or similar structures.
If a two-post hoist is used to lift the vehicle, thefront and rear lift arm pads should be centeredunder the reinforced lift plates on the inboardedge of the sill rail (see illustration).
Emission inspection readiness
What is an Onboard Diagnostic System
(OBD II)?
OBD II is part of your vehicle's computerizedengine management system. It stores diagnos-tic information about your vehicle's emissioncontrols. It can light the Check Engine light(MIL) if it detects an emission control "fault." A"fault" is a component or system that is notperforming within an expected range. A faultmay be permanent or temporary. OBD II willstore a message about any fault.
How do states use OBD II for emission
inspections?
Many states connect a computer directly to avehicle's OBD II system. The inspector canthen read "faults." In some states, this type of
07 Maintenance and specifications
Maintaining your car
07
258
inspection has replaced the tailpipe emissiontest.
How can my vehicle fail OBD II emission
inspection?
Your vehicle can fail OBD II emission inspec-tion for any of the following reasons.
• If your Check Engine (MIL) light is lit, yourvehicle may fail inspection.
• If your vehicle's Check Engine light was lit,but went out without any action on yourpart, OBD II will still have a recorded fault.Your vehicle may pass or fail, dependingon the inspection practices in your area.
• If you had recent service that required dis-connecting the battery, OBD II diagnosticinformation may be incomplete and "notready" for inspection. A vehicle that is notready may fail inspection.
How can I prepare for my next OBD II
emission inspection?
• If your Check Engine (MIL) light is lit – orwas lit but went out without service, haveyour vehicle diagnosed and, if necessary,serviced by a qualified Volvo technician.
• If you recently had service for a lit CheckEngine light, or if you had service thatrequired disconnecting the battery, aperiod of driving is necessary to bring theOBD II system to "ready" for inspection. Ahalf-hour trip of mixed stop-and-go/high-
way driving is typically needed to allowOBD II to reach readiness. Your Volvoretailer can provide you with more infor-mation on planning a trip.
• Maintain your vehicle in accordance withyour vehicle's maintenance schedule.
07 Maintenance and specifications
Hood and engine compartment
07
259
Opening and closing the hood
G01
0951
Pull the lever located under the left side ofthe dash to release the hood lock.
Lift the hood slightly. Press the releasecontrol (located under the right front edgeof the hood) to the left, and lift the hood
WARNING
Check that the hood locks properly whenclosed.
Engine compartment, overview
G01
8945
The appearance of the engine compartmentmay vary depending on engine model.
Coolant expansion tank
Power steering fluid reservoir
Engine oil dipstick
Radiator
Filler cap for engine oil
Cover over brake fluid reservoir
Battery
Relay and fuse box
Washer fluid reservoir
Air cleaner
WARNING
The cooling fan may start or continue tooperate (for up to 6 minutes) after the enginehas been switched off.
WARNING
The ignition should always be completelyswitched off before performing any opera-tions in the engine compartment.
The distributor ignition system operates atvery high voltages. Special safety precau-tions must be followed to prevent injury.Always turn the ignition off when:
• Replacing distributor ignition compo-nents e.g. plugs, coil, etc.
• Do not touch any part of the distributorignition system while the engine is run-ning. This may result in unintendedmovements and body injury.
07 Maintenance and specifications
Engine oil
07
260
Checking the engine oil
The oil level should be checked at regular inter-vals, particularly during the period up to thefirst scheduled maintenance service.
• See page 298 for oil specifications.
• Refer to the Warranty and Service RecordsInformation booklet for information on theoil change intervals.
Volvo recommends Castrol oil products.
CAUTION
• Not checking the oil level regularly canresult in serious engine damage if the oillevel becomes too low.
• Oil that is lower than the specified qual-ity can damage the engine.
• Volvo does not recommend the use ofoil additives.
• Always add oil of the same type andviscosity as already used.
• Never fill oil above the MAX mark. Thiscould cause an increase in oil consump-tion.
Checking and adding oil
G02
1734
Location of the filler cap and dipstick
NOTE
Before checking the oil:
• The car should be parked on a level sur-face.
• If the engine is warm, wait for at least10 – 15 minutes after the engine hasbeen switched off.
G02
1737
The oil level must be between the MIN and MAXmarks on the dipstick
Checking the oil
1. Pull out the dipstick and wipe it with a lint-free rag.
2. Reinsert the dipstick, pull it out, and checkthe oil level. The level must be between theMIN and MAX marks.
3. Add oil if necessary. If the level is close tothe MIN mark, add approximately0.5 US quarts (0.5 liters) of oil.
4. Recheck the level and add more oil if nec-essary until the level is near the MAX mark.
07 Maintenance and specifications
Engine oil
07
261
WARNING
Do not allow oil to spill onto or come intocontact with hot exhaust pipe surfaces.
NOTE
Synthetic oil is not used when the oil ischanged at the normal maintenance inter-vals except at owner request and at addi-tional charge. Please consult your Volvoretailer.
07 Maintenance and specifications
Fluids
07
262
Coolant
Location of the coolant reservoir
Normally, the coolant does not need to bechanged. If the system must be drained, con-sult a trained and qualified Volvo service tech-nician.
See page 299 for information on cooling sys-tem capacities.
CAUTION
• If necessary, top up the cooling systemwith Volvo Genuine Coolant/Antifreezeonly (a 50/50 mix of water and anti-freeze).
• Different types of antifreeze/coolantmay not be mixed.
• If the cooling system is drained, itshould be flushed with clean water orpremixed anti-freeze before it is refilledwith the correct mixture of water/anti-freeze.
• The cooling system must always bekept filled to the correct level, and thelevel must be between the MIN andMAX marks. If it is not kept filled, therecan be high local temperatures in theengine which could result in damage.Check coolant regularly!
• Do not top up with water only. Thisreduces the rust-protective and anti-freeze qualities of the coolant and has alower boiling point. It can also causedamage to the cooling system if itshould freeze.
• Do not use chlorinated tap water in thevehicle's cooling system.
WARNING
• Never remove the radiator cap while theengine is warm. Wait until the vehiclecools.
• If it is necessary to top off the coolantwhen the engine is warm, unscrew theexpansion tank cap slowly so that theoverpressure dissipates.
Brake fluid
Location of the brake fluid reservoir
Checking the level
The fluid reservoir is concealed under theround cover at the rear of the engine compart-ment. The round cover must be removed firstbefore the reservoir cap can be accessed.
07 Maintenance and specifications
Fluids
07
263
The brake fluid should always be between theMIN and MAX marks on the inside of the res-ervoir. Check, without removing the cap, thatthere is sufficient fluid in the reservoir.
Fluid type: DOT 4+ boiling point >536 °F(>280 °C), P/N 9437433
Replace: The fluid should be replaced accord-ing to the intervals specified in the Warrantyand Service Records Information booklet.
When driving under extremely hard conditions(mountain driving, etc), it may be necessary toreplace the fluid more often. Consult a trainedand qualified Volvo service technician.
Always entrust brake fluid changing to atrained and qualified Volvo service technician.
WARNING
• If the fluid level is below the MIN markin the reservoir or if a brake-relatedmessage is shown in the informationdisplay: DO NOT DRIVE. Have the cartowed to a trained and qualified Volvoservice technician and have the brakesystem inspected.
• Dot 4+ should never be mixed with anyother type of brake fluid.
Filling
1. Turn and open the cover.
2. Unscrew the reservoir cap and fill the fluid.The level must be between the MIN andMAX marks.
Power steering fluid
Check the level frequently. The fluid does notrequire changing. The fluid level must bebetween the MIN and MAX marks. For capaci-ties and recommended fluid grade, seepage 299.
WARNING
If a problem should occur in the powersteering system or if the vehicle has no elec-trical current and must be towed, it is stillpossible to steer the vehicle. However, keepin mind that greater effort will be required toturn the steering wheel.
CAUTION
Keep the area around the power steeringfluid reservoir clean when checking.
07 Maintenance and specifications
Replacing bulbs
07
264 * Option/accessory, for more information, see Introduction.
Introduction
All bulb specifications are listed on page 270.The following bulbs should only be replaced bya trained and qualified Volvo service techni-cian:
• Dome lighting, reading lights
• Glove compartment lighting
• Footwell lighting
• Turn signals in the door mirrors
• Approach lighting in the door mirrors
• Brake/fog/taillights
• Rear parking lights
• Active Bending Lights
• LED bulbs
NOTE
For information regarding any other bulbsnot mentioned in this section, please con-tact your Volvo retailer or a trained andauthorized Volvo service technician.
WARNING
• Active Bending Lights* – due to the highvoltage used by these headlights, thesebulbs should only be replaced by atrained and qualified Volvo service tech-nician.
• Turn off the lights and remove theremote key from the ignition beforechanging any bulbs.
Headlight housing
G010325
WARNING
• The engine should not be running whenchanging bulbs.
• If the engine has been running just priorto replacing bulbs in the headlight hous-ing, please keep in mind that compo-nents in the engine compartment will behot.
The entire headlight housing must be lifted outwhen replacing all front bulbs.
CAUTION
Never touch the glass of bulbs with your fin-gers. Grease and oils from your fingersvaporize in the heat and will leave a depositon the reflector, which will damage it.
07 Maintenance and specifications
Replacing bulbs
07
��
265
NOTE
• Always switch off the ignition beforestarting to replace a bulb.
• The optional Active Bending Light bulbscontain trace amounts of mercury.These bulbs should always be disposedof by a trained and qualified Volvo serv-ice technician.
Removing the headlight housing
1. Switch off the ignition by briefly pressingthe START/STOP ENGINE button andremove the remote key from the ignitionslot1.
2. (Upper illustration under "Headlight hous-ing")
Withdraw the headlight housing's lock-ing pins.
Pull the headlight housing straight out.
CAUTION
When disconnecting the connector, pull onthe connector itself and not on the wiring.
3. (Lower illustration under "Headlight hous-ing")
Unplug the wiring connector by holdingdown the clip with your thumb.
Pull out the connector with the otherhand.
4. Lift out the housing and place it on a softsurface to avoid scratching the lens.
5. Replace the defective bulb(s).
Reinserting the headlight housing
1. Plug in the connector until it clicks intoplace.
2. Reinstall the headlight housing and lockingpins. Check that they are correctlyinserted. The headlight housing must beproperly inserted and secured in placebefore the lighting is switched on or theremote key is inserted into the ignition slot.
3. Check that the lights function properly.
Removing the cover to access thebulbs
G02
1745
NOTE
Before starting to replace a bulb, seepage 264.
1. Open the retaining clamp by pressing it tothe side.
2. Press down the clips on the upper edge ofthe cover and remove it.
Reinstall the cover in the reverse order.
1 Does not apply to vehicles with the optional keyless drive.
07 Maintenance and specifications
Replacing bulbs
07
266
Low beam, Halogen
G02
1746
1. Remove the headlight housing from thevehicle (see page 264).
2. Remove the cover over the bulbs (seepage 265).
3. Unplug the connector from the bulb.
4. Remove the bulb by pressing the holderdownward.
5. Remove the bulb by pulling it straight out.
6. Press the new bulb into the socket until itsnaps into place. It can only be secured inone position.
7. Put the cover back into position and rein-stall the headlight housing.
High beam, Halogen
G02
1747
1. Remove the headlight housing from thevehicle (see page 264).
2. Remove the cover over the bulbs (seepage 265).
3. Remove the bulb by turning it counter-clockwise and pulling it straight out.
4. Remove the connector from the bulb.
5. Press the new bulb into the socket and turnit clockwise to put it in place. It can only besecured in one position.
6. Reinsert the bulb holder into the headlighthousing.
7. Put the cover back into position and rein-stall the headlight housing.
Extra high beam2
G02
1748
1. Remove the headlight housing from thevehicle (see page 264).
2. Remove the cover over the bulbs (seepage 265).
3. Remove the bulb by pressing the holderdownward.
4. Remove the connector from the bulb.
5. Insert a new bulb in the connector until itsnaps in place. It can only be inserted inone way.
6. Return the bulb holder into position in theheadlight housing.
7. Put the cover back into position and rein-stall the headlight housing.
2 Models with optional Active Bending Lights only.
07 Maintenance and specifications
Replacing bulbs
07
��
267
Parking lights
G02
1749
1. Remove the headlight housing from thevehicle (see page 264).
2. Remove the cover over the bulbs (seepage 265).
3. To access the bulb, first remove the highbeam bulb.
4. Pull the wire to withdraw the bulb holder.
5. Remove the burned out bulb and install anew one. It can only be secured in oneposition.
6. Press the bulb holder into the socket andpress until it clicks into place.
7. Put the cover back into position and rein-stall the headlight housing.
Turn signals
G02
1750
1. Remove the headlight housing from thevehicle (see page 264).
2. Remove the round cover by pulling the tabuntil the cover comes off.
3. Pull out the holder to access the bulb.
4. Remove the burned out bulb by pressing itin slightly and turning out before pulling itout. Press a new bulb into the socket.
5. Press the bulb holder into the socket andpress until it clicks into place.
6. Press the cover until it clicks into position.
7. Reinstall the headlight housing.
Side marker lights
NOTE
Before starting to replace a bulb, seepage 264.
G02
1751
1. Remove the headlight housing from thevehicle (see page 264).
2. Remove the round cover.
3. Pull the wire to withdraw the bulb holder.
4. Pull out the burned out bulb and install anew one. It can only be secured in oneposition.
5. Press the bulb holder into the socket andpress until it clicks into place.
6. Press the cover until it clicks into position.
07 Maintenance and specifications
Replacing bulbs
07
268
Front fog lights
1. Remove the cover by pressing in the clipsand pulling straight out.
2. Unscrew the fog light housing screw andpull it out.
3. Turn the bulb counterclockwise andremove it.
4. Install a new bulb by turning clockwise.
5. Press the bulb into the holder. (The profileof the bulb holder corresponds to the pro-file of the foot of the bulb.)
6. Reinstall the bulb holder. The TOP mark onthe bulb holder must always be upward.
7. Put the cover back into place.
Location of taillight bulbs
G01
7457
Taillight lens, right side
Parking/brake lights (LED)
Side maker lights (LED)
Turn signal
Reflector
Rear fog light (driver's side only)
Backup light
Brake lights (LED)
High-mounted brake lights (LED)
NOTE
If an error message remains in the displayafter a faulty bulb has been replaced, con-tact an authorized Volvo workshop.
Taillight housing, turn signal
G01
7456
The bulbs in the taillight cluster are replacedfrom inside the cargo area (not the LED func-tions).
NOTE
Before starting to replace a bulb, seepage 264.
1. Open the panel.
07 Maintenance and specifications
Replacing bulbs
07
��
269
2. Remove the insulation by pulling it straightout.
3. Remove the entire bulb unit by turning itshandle counterclockwise.
4. Remove the bulb by pulling it straight out.
Replace the bulb in the reverse order.
License plate lighting
G01
7458
1. Remove the screws with a screwdriver.
2. Carefully detach the entire bulb housingand pull it out.
3. Replace the bulb.
4. Reinsert the entire bulb housing andtighten the screws.
Cargo area lighting
G03
1942
NOTE
Before starting to replace a bulb, seepage 264.
1. Insert a screwdriver and gently turn so thatthe bulb housing comes loose.
2. Replace the bulb.
3. Check that the bulb illuminates and pressit back into the bulb housing.
Vanity mirror lighting
Removing the mirror glass
G02
1759
1. Insert a screwdriver underneath the loweredge, in the center, turn and carefully pryup the lug on the edge.
2. Insert the screwdriver underneath the edgeon the left and right sides (by the blackrubber sections), and pry carefully so thatthe glass comes loose in the lower edge.
3. Carefully detach and lift aside the entiremirror glass and cover.
4. Replace the bulb.
Reinstalling the mirror glass
1. Press the three lugs at top edge of the mir-ror glass back into position.
07 Maintenance and specifications
Replacing bulbs
07
270
2. Press the three lower lugs back into posi-tion.
Bulb specifications
Lightingfunction
Wattage Bulb
Active Bend-ing Lights(extra highbeam)
55 H7
Low beam(halogen)
55 H7
High beam(halogen)
65 H9
Rear fog light 21 P21W
Brake lights 21 P21W
Backup lights 21 P21W
Rear turn sig-nals
21 PY21W
Front turn sig-nals
21 H21W
Front foglights
35 H8
Lightingfunction
Wattage Bulb
Cargo arealighting,license platelighting
5 FestoonbulbSV5.5
Vanity mirror 1.2 FestoonbulbSV5.5
Front parkinglights
5 W5W
Front sidemarker lights
5 W5W
Glove com-partmentlighting
5 FestoonbulbSV8.5
07 Maintenance and specifications
Wiper blades and washer fluid
07
��
271
Wiper blades
The windshield wiper blades are differentlengths. The blade on the driver’s side is longerthan the one on the passenger side.
Service position
Wiper blades in service position
The wiper blades must be in the service (verti-cal) position for replacement or washing. Toput them in this position:
1. Switch off the ignition (ignition mode 0, seepage 79) and keep the remote key in theignition slot1.
2. Move the right steering wheel lever up andhold it for at least 1 second. The wipers willthen move to the vertical position on thewindshield.
The wipers will return to the normal positionwhen the vehicle is started.
Replacing the windshield wiper blades
1 Does not apply to vehicles with the optional keyless drive.
07 Maintenance and specifications
Wiper blades and washer fluid
07
272
With the wipers in the service position, foldout the wiper arm from the windshield.Press the button on the wiper blade attach-ment and pull the wiper blade straight out,parallel with the wiper arm.
Slide in the new wiper blade until it clicksinto place.
Check that the blade is securely in place.
Cleaning
Keeping the windshield and wiper blades cleanhelps improve visibility and prolongs the serv-ice life of the wiper blades. Clean the wiperblades with a stiff-bristle brush and lukewarmsoap solution or car washing detergent.
Replacing the tailgate wiper blade
G03
2770
1. Fold the wiper arm outward.
2. Grasp the inner section of wiper blade (atthe arrow).
3. Pull out the blade to release it from thewiper arm.
4. Press the new wiper blade into place andcheck that it seats securely.
5. Fold the wiper arm back toward the tailgatewindow.
Filling washer fluid
G02
1764
Location of the washer fluid reservoir
The windshield and headlight washers share acommon reservoir.
The washer fluid reservoir is located on thedriver's side of the engine compartment. Dur-ing cold weather, the reservoir should be filled
with windshield washer solvent containingantifreeze. For capacities, see page 299.
07 Maintenance and specifications
Battery
07
��
273
Warning symbols on the battery
Wear protective goggles.
Keep away from children.
Avoid smoking, open flames,and/or sparks.
See the owner's manual.
Contains corrosive acid.
Risk of explosion
NOTE
A used battery should be disposed of in anenvironmentally responsible manner. Con-sult your Volvo retailer or take the battery toa recycling station.
Handling
• Check that the battery cables are correctlyconnected and tightened.
• Never disconnect the battery when theengine is running (for example, whenreplacing the battery).
• If the battery is fully discharged a numberof times, this may shorten its service life.
• The service life of a battery is affected byfactors such as driving conditions and cli-mate. Extreme cold may also furtherdecrease the battery’s starting capacity.
• Because the battery’s starting capacitydecreases with time, it may be necessaryto recharge it if the vehicle is not driven foran extended period of time or if the vehicleis usually only driven short distances.
Never use a quick charger to charge the bat-tery.
WARNING
• Never expose the battery to open flameor electric spark.
• Do not smoke near the battery.
• Battery fluid contains sulfuric acid. Donot allow battery fluid to contact eyes,skin, fabrics or painted surfaces. If con-tact occurs, flush the affected areaimmediately with water. Obtain medicalhelp immediately if eyes are affected.
NOTE
The life of the battery is shortened if itbecomes discharged repeatedly.
Maintenance
• Use a screw driver to open the caps orcover and a flashlight to inspect the level.
• If necessary, add distilled water. The levelshould never be above the indicator.
• The fluid level should be checked if thebattery has been recharged.
• After inspection, be sure the cap over eachbattery cell or the cover is securely inplace.
• Check that the battery cables are correctlyconnected and properly tightened.
07 Maintenance and specifications
Battery
07
274
• Never disconnect the battery when theengine is running, or when the key is in theignition. This could damage the vehicle'selectrical system.
• The battery should be disconnected fromthe vehicle when a battery charger is useddirectly on the battery.
• To help keep the battery in good condition,the vehicle should be driven for at least 15minutes a week or connected to a chargerwith an automatic charging function.
• If the battery is fully discharged a numberof times, this may shorten its service life.Keeping the battery fully charged helpsprolong its service life.
• The service life of a battery is affected byfactors such as driving conditions and cli-mate. Extreme cold may also furtherdecrease the battery’s starting capacity.
• Because the battery’s starting capacitydecreases with time, it may be necessaryto recharge it if the vehicle is not driven foran extended period of time or if the vehicleis usually only driven short distances.
•
CAUTION
• Always use distilled or deionized water(battery water).
• Never fill above the level mark in the cell.
Changing
WARNING
Connect and disconnect the positive andnegative cables in the correct sequence.
Removal
Switch off the ignition and wait at least5 minutes before disconnecting the battery so
07 Maintenance and specifications
Battery
07
275
that all information in the vehicle's electricalsystem can be stored in the control modules.
Open the clips on the front cover andremove the cover.
Release the rubber moulding so that therear cover is free.
Remove the rear cover by pulling it away.
Detach the black negative cable.
Detach the red positive cable
Detach the ventilation hose from thebattery
Loosen the screw holding the batteryclamp.
Move the battery to the side and lift it up.
WARNING
PROPOSITION 65 WARNING!
Battery posts, terminals, and related acces-sories contain lead and lead compounds,chemicals known to the state of Californiato cause cancer and reproductive harm.Wash hands after handling.
Installation
1. Lower the battery into the battery box.
2. Move the battery inward and to the sideuntil it reaches the rear edge of the box.
3. Screw in the battery with the screw in theclamp.
4. Connect the ventilation hose.
5. Connect the red positive cable.
6. Connect the black negative cable.
7. Press in the rear cover. (See Removal).
8. Reinstall the cold section moulding. (SeeRemoval).
9. Reinstall the front cover and secure it withthe clips. (See Removal).
07 Maintenance and specifications
Fuses
07
276
Replacing fuses
There are relay/fuse boxes located in theengine compartment, the passenger compart-ment, and the cargo area.
If an electrical component fails to function, thismay be due to a blown fuse. The easiest wayto see if a fuse is blown is to remove it.
To do so:
1. Pull the fuse straight out. If a fuse is difficultto remove, a special fuse removal tool islocated on the inside of the engine com-partment fuse box cover.
2. From the side, examine the curved metalwire in the fuse to see if it is intact.
If the wire is broken, insert a new fuse of thesame color and amperage (written on the fuse).
If fuses burn out repeatedly, have the electricalsystem inspected by a trained and qualifiedVolvo service technician.
WARNING
Never use metal objects or fuses with higheramperage than those stated on the follow-ing pages. Doing so could seriously damageor overload the vehicle's electrical system.
Location of the fuse boxes
Under the glove compartment
Under the glove compartment
Cargo area
Engine compartment
07 Maintenance and specifications
Fuses
07
278 * Option/accessory, for more information, see Introduction.
Engine compartment, upper
Engine compartment, front
Engine compartment, lower
Positions
These fuses are all located in the engine com-partment box. Fuses in are located under
.
NOTE
• Fuses 16 – 33 and 35 – 41 may bechanged at any time when necessary.
• Fuses 1 – 15, 34 and 42 – 44 are relays/circuit breakers and should only beremoved or replaced by a trained andqualified Volvo service technician.
• There is a special fuse removal tool onthe underside of the cover.
Function A
Circuit breaker 50
Circuit breaker 50
Circuit breaker 60
Circuit breaker 60
Function A
Circuit breaker 60
–
–
Headlight washers* 20
Windshield wipers 30
–
Climate system blower 40
–
ABS pump 40
ABS valves 20
–
Active Bending Lights-head-light leveling*
10
Central electrical module 20
ABS 15 feed 5
Speed-dependent steeringforce*
5
Function A
Engine Control Module (ECM),transmission, SRS
10
Heated washer nozzles* 10
Vacuum pump I5T 5
Lighting panel 5
-
-
-
Relay - engine compartmentbox
5
Auxiliary lights* 20
Horn 15
Engine Control Module (ECM) 10
Automatic transmission con-trol module
15
A/C compressor 15
Coils 5
07 Maintenance and specifications
Fuses
07
��
279
Function A
Starter motor relay 30
Ignition coils 20
Engine Control Module (ECM),throttle
10
Injection system, Mass airmeter (ECM)
15
Engine valves 10
EVAP/heated oxygen sensor/Injection
15
-
Fuel leakage detection 5
–
Cooling fan 80
Electro-hydraulic power steer-ing
100
07 Maintenance and specifications
Fuses
07
280 * Option/accessory, for more information, see Introduction.
Under the glove compartment
Fold aside the upholstery covering the fuseboxes.
1. Press the cover's lock and fold it up.
2. The fuses are accessible.
Positions-fuse box A
Pos
Function A
Circuit breaker - audio system,subwoofer*
40
-
Pos
Function A
-
-
-
-
12-volt socket (cargo area) 15
Controls in driver's door 20
Pos
Function A
Controls in front passenger'sdoor
20
Controls in right rear passeng-er's door
20
Controls in left rear passeng-er's door
20
Keyless drive* 20
Power driver's seat* 20
07 Maintenance and specifications
Fuses
07
��
* Option/accessory, for more information, see Introduction. 281
Pos
Function A
Power front passenger's seat* 20
Folding rear seat headrestraints*
15
-
Audio system, Navigation sys-tem display*
10
Audio system 15
Bluetooth hands-free system 5
-
Power moonroof*
Courtesy lighting, climate sys-tem sensor
5
12-volt sockets 15
Heated front passenger'sseat*
15
Heated driver's seat* 15
-
Pos
Function A
Heated rear passenger's seat(right)*
15
Heated rear passenger's seat(left)*
15
Park assist*, Volvo NavigationSystem*, Park assist camera*
5
All Wheel Drive* control mod-ule
5
Active chassis system* 10
Positions-fuse box B
Pos Function A
Tailgate wiper 15
-
Front courtesy lighting,power seat(s)*
7.5
Instrument panel informa-tion display
5
Adaptive cruise control/collision warning*
10
Pos Function A
Courtesy lighting, rain sen-sor*
7.5
Steering wheel module 7.5
Rear cental locking andfuel filler door
10
Washers 15
Windshield washer 15
Tailgate unlock 10
Tailgate lock 10
Fuel pump 20
Remote key receiver,Alarm, Climate system
5
Steering wheel lock 15
Alarm, On-board diagnos-tic system
5
-
Airbag system, Occupantweight system
10
07 Maintenance and specifications
Fuses
07
282 * Option/accessory, for more information, see Introduction.
Pos Function A
Adaptive cruise controlfront radar*
5
Accelerator pedal, powerdoor mirrors, Heated rearseats*
7.5
Audio system, CD andradio
Not High performance orPremium Sound systems
15
Brake lights 5
Power moonroof* 20
Immobilizer 5
07 Maintenance and specifications
Fuses
07
* Option/accessory, for more information, see Introduction. 283
Cargo area
Located behind the upholstery on the left side of the cargo area
Positions
Rear fuse box A
Electric parking brake (leftside)
30
Electric parking brake (rightside)
30
Heated rear window 30
Trailer socket 2* 15
Power tailgate* 30
Rear fuse box A
-
- -
- -
- -
- -
Rear fuse box A
Trailer socket 1* 40
- -
07 Maintenance and specifications
Vehicle care
07
284
Washing the car
The following points should be kept in mindwhen washing and cleaning the car:
• The car should be washed at regular inter-vals since dirt, dust, insects and tar spotsadhere to the paint and may cause dam-age. To help prevent corrosion, it is partic-ularly important to wash the car frequentlyin the wintertime.
• Avoid washing your car in direct sunlight.Doing so may cause detergents and waxto dry out and become abrasive. To avoidscratching, use lukewarm water to softenthe dirt before you wash with a softsponge, and plenty of sudsy water.
• Bird droppings: Remove from paintworkas soon as possible. Otherwise the finishmay be permanently damaged.
• A detergent can be used to facilitate thesoftening of dirt and oil.
• Dry the car with a clean chamois andremember to clean the drain holes in thedoors and rocker panels.
• Tar spots can be removed with tar removerafter the car has been washed.
• A stiff-bristle brush and lukewarm soapywater can be used to clean the wiperblades. Frequent cleaning of the wind-shield and wiper blades improves visibility
considerably and also helps prolong theservice life of the wiper blades.
• Wash off the dirt from the underside (wheelhousings, fenders, etc).
• In areas of high industrial fallout, more fre-quent washing is recommended.
NOTE
When washing the car, remember to removedirt from the drain holes in the doors andsills.
CAUTION
• Avoid waxing or polishing plastic or rub-ber components
• Polishing chromed strips can wearaway or damage the surface
• Polishes containing abrasive sub-stances should not be used
CAUTION
• During high pressure washing, thespray mouthpiece must never be closerto the vehicle than 13" (30 cm). Do notspray into the locks.
• Dirt, snow, etc., on the headlights canreduce lighting capacity considerably.Clean the headlights regularly, forexample when refueling.
Special moonroof cautions:
• Always close the moonroof and sunshade before washing your vehicle.
• Never use abrasive cleaning agents onthe moonroof.
• Never use wax on the rubber sealsaround the moonroof.
Exterior components
Volvo recommends the use of special cleaningproducts, available at your Volvo retailer, forcleaning colored plastic, rubber, or ornamentalcomponents such as chromed strips on theexterior of your vehicle. The instructions forusing these products should be followed care-fully. Solvents or stain removers should not beused.
07 Maintenance and specifications
Vehicle care
07
��
285
CAUTION
• Avoid waxing or polishing plastic or rub-ber components
• Polishing chromed strips can wearaway or damage the surface
• Polishes containing abrasive sub-stances should not be used
Automatic car wash
• We do NOT recommend washing your carin an automatic wash during the first fewmonths (because the paint will not havehardened sufficiently).
• An automatic wash is a simple and quickway to clean your car, but it is worthremembering that it may not be as thor-ough as when you yourself go over the carwith sponge and water. Keeping the under-body clean is most important, especially inthe winter. Some automatic washers donot have facilities for washing the under-body.
CAUTION
• Before driving into an automatic carwash, turn off the optional rain sensor toavoid damaging the windshield wipers.
• Make sure that side view mirrors, auxil-iary lamps, etc, are secure, and that anyantenna(s) are retracted or removed.Otherwise there is risk of the machinedislodging them.
• Chromed wheels: Clean chrome-plated wheels using the same deter-gents used for the body of the vehicle.Aggressive wheel-cleaning agents canpermanently stain chrome-platedwheels.
WARNING
• When the vehicle is driven immediatelyafter being washed, apply the brakes,including the parking brake, severaltimes in order to remove any moisturefrom the brake linings.
• Engine cleaning agents should not beused when the engine is warm. Thisconstitutes a fire risk.
Exterior lighting
Condensation may form temporarily on theinside of the lenses of exterior lights such asheadlights, fog lights, or taillights. This is nor-
mal and the lights are designed to withstandmoisture. Normally, condensation will dissi-pate after the lights have been on for a shorttime.
Polishing and waxing
• Normally, polishing is not required duringthe first year after delivery, however, wax-ing may be beneficial.
• Before applying polish or wax the vehiclemust be washed and dried. Tar spots canbe removed with kerosene or tar remover.Difficult spots may require a fine rubbingcompound.
• After polishing use liquid or paste wax.
• Several commercially available productscontain both polish and wax.
• Waxing alone does not substitute for pol-ishing a dull surface.
• A wide range of polymer-based waxes canbe purchased today. These waxes are easyto use and produce a long-lasting, high-gloss finish that protects the bodyworkagainst oxidation, road dirt and fading.
• Do not polish or wax your vehicle in directsunlight (the surface of the vehicle shouldnot be warmer than 113 °F (45 °C).
07 Maintenance and specifications
Vehicle care
07
286
CAUTION
Volvo does not recommend the use of long-life or durable paint protection coatings,some of which may claim to prevent pitting,fading, oxidation, etc. These coatings havenot been tested by Volvo for compatibilitywith your vehicle's clear coat. Some of themmay cause the clear coat to soften, crack,or cloud. Damage caused by application ofpaint protection coatings may not be cov-ered under your vehicle's paint warranty.
Cleaning the interior
Only use cleaning agents and car care prod-ucts recommended by Volvo. Clean regularlyand follow the instructions included with thecar care product.
Upholstery care
Fabric
Clean with soapy water or a detergent. Formore difficult spots caused by oil, ice cream,shoe polish, grease, etc., use a clothing/fabricstain remover. Consult your Volvo retailer.
AlcanteraTM suede-like material
Suede-like upholstery can be cleaned with asoft cloth and mild soap solution.
Leather care
Volvo's leather upholstery is manufacturedwith a protectant to repel soiling. Over time,
sunlight, grease and dirt can break down theprotection. Staining, cracking, scuffing, andfading can result.
Volvo offers an easy-to-use, non-greasyleather care kit formulated to clean and beau-tify your vehicle's leather, and to renew theprotective qualities of its finish. The cleanerremoves dirt and oil buildup. The light creamprotectant restores a barrier against soil andsunlight.
Volvo also offers a special leather softener thatshould be applied after the cleaner and pro-tectant. It leaves leather soft and smooth, andreduces friction between leather and other fin-ishes in the vehicle.
Volvo recommends cleaning, protecting andconditioning your vehicle's leather two to fourtimes a year. Ask your Volvo retailer aboutLeather Care Kit 951 0251 and Leather Soft-ener 943 7429.
Cleaning leather upholstery
1. Pour leather cleaner on a damp spongeand squeeze it until the cleaner foams.
2. Apply the foam to the stain by moving thesponge with circular movements.
3. Dampen the stain thoroughly with thesponge. Let the sponge absorb the stain,do not rub.
4. Dry the stain with soft paper towels or atowel, and allow the leather to dry com-pletely.
Protecting leather upholstery
1. Put a small amount of protectant cream ona cloth and apply a thin coating of creamto the upholstery with light circular move-ments.
2. Allow the leather to dry for 20 minutes.
This will help the leather resist staining andprotect against sunlight's harmful UV rays.
07 Maintenance and specifications
Vehicle care
07
��
287
CAUTION
• Under no circumstances should gaso-line, naphtha or similar cleaning agentsbe used on the plastic or the leathersince these can cause damage.
• Take extra care when removing stainssuch as ink or lipstick since the coloringcan spread.
• Use solvents sparingly. Too much sol-vent can damage the seat padding.
• Start from the outside of the stain andwork toward the center.
• Sharp objects (e.g. pencils or pens in apocket) or Velcro fasteners on clothingmay damage the textile upholstery.
• Clothing that is not colorfast, such asnew jeans or suede garments, may stainthe upholstery.
Cleaning the seat belts
Clean only with lukewarm water and a mildsoap solution.
Cleaning floor mats
The floor mats should be vacuumed or brushedclean regularly, especially during winter whenthey should be taken out for drying. Spots ontextile mats can be removed with a mild deter-
gent. For best protection in winter, Volvo rec-ommends the use of Volvo rubber floor mats.Consult your Volvo retailer.
Spots on interior plastic, metal, or wood
surfaces
Cleaning interior plastic components shouldbe done with a cleaning agent speciallydesigned for this purpose. Consult your Volvoretailer.
Touching up paintwork
Paint code on the model plate1
Paint damage requires immediate attention toavoid rusting. Make it a habit to check the finishregularly, for instance washing the vehicle.Touch-up if necessary.
Paint repairs require special equipment andskill. Contact your Volvo retailer for any exten-sive damage.
Minor scratches can be repaired by usingVolvo touch-up paint.
Color code
Make sure you have the right color. The colorcode number is stated on the model plate.
Minor stone chips and scratches
Material:
• Primer – can
• Paint – touch-up pen
• Brush
• Masking tape
If the stone chip has not gone down to the baremetal and an undamaged color coat remains,you can add paint immediately after removingdirt.
NOTE
When touching up the vehicle, it should beclean and dry. The surface temperatureshould be above 60 °F (15 °C).
1 see page 292 for the location of the model plate.
07 Maintenance and specifications
Vehicle care
07
288
Minor scratches on the surface
If the stone chip has not penetrated down tothe metal and an undamaged layer of paintremains, the touch-up paint can be applied assoon as the spot has been cleaned.
Repairing stone chips
G02
1832
1. Place a strip of masking tape over the dam-aged surface. Pull the tape off so that anyloose flakes of paint adhere to it.
2. Thoroughly mix the primer and apply it witha small brush.
3. When the primer surface is dry, the paintcan be applied using a brush. Mix the paintthoroughly; apply several thin paint coatsand let dry after each application.
4. If there is a longer scratch, you may wantto protect surrounding paint by masking itoff
5. After a few days, polish the touched-upareas. Use a soft rag and a small amountof polish.
290
Label information.................................................................................. 292Specifications........................................................................................ 294Overview of information and warning symbols..................................... 301Volvo programs..................................................................................... 304
08 Specifications
Label information
08
293
List of labels
Model
plate. Vehicle Identification Number (VIN).Codes for color and upholstery, etc. Themodel plate is located on the rear side ofthe B-pillar (the pillar between the front andrear passenger doors) and the rear pas-senger's door must be open in order to seeit.
Federal Motor Vehicle Safety Standards
(FMVSS) specifications (USA) and Min-
istry of Transport (CMVSS) standards
(Canada). Your Volvo is designed to meetall applicable safety standards, as evi-denced by the certification label on thedriver's side B-pillar (the structural mem-ber at the side of the vehicle, at the rear ofthe driver's door opening). For further infor-mation regarding these regulations, pleaseconsult your Volvo retailer.
Tire inflation
pressures. This label indicates the correctinflation pressures for the tires that were onthe vehicle when it left the factory. Cana-dian models have the upper decal; U.S.models have the lower one.
Vehicle Identification Number
(VIN). The VIN plate is located on the topleft surface of the dashboard. The VehicleIdentification Number (VIN) should alwaysbe quoted in all correspondence concern-ing your vehicle with the retailer and whenordering parts.
Vehicle Emission Control Information.
Your Volvo is designed to meet all appli-cable emission standards, as evidenced bythe certification label on the underside ofthe hood. For further information regardingthese regulations, please consult yourVolvo retailer.
08 Specifications
Specifications
08
294
Dimensions
G01
7405
Position Dimension in (mm)
A Wheelbase 110.8 (2815)
B Length 190.5 (4838)
C Load length, floor, seatback down 73.9 (1878)
D Load length, floor 42.9 (1089)
E Height 63.1 (1604)
F Load height 28.5 (724)
G Track, front 63.1 (1604)
08 Specifications
Specifications
08
��
295
Position Dimension in (mm)
H Track, rear 61.8 (1570)
I Load width, floor 45.4 (1153)
J Width 73.3 (1861)
K Width, incl. door mirrors 83.4 (2119)
Weights
Category USA Canada
Gross vehicle weight XC70 FWDA non-turbo: 5130 lbs
XC70 non-turbo AWDB: 5270 lbs
XC70 turbo AWD: 5310 lbs
XC70 FWDA non-turbo: 2330 kg
XC70 non-turbo AWDB: 2390 kg
XC70 turbo AWD: 2410 kg
Capacity weight All models: 900 lbs All models: 410 kg
Permissible axle weights, front XC70 non-turbo FWD: 2750 lbs
XC70 non-turbo AWD: 2800 lbs
XC70 turbo AWD: 2820 lbs
XC70 non-turbo FWD: 1250 kg
XC70 non-turbo AWD: 1270 kg
XC70 turbo AWD: 1280 kg
Permissible axle weights, rear XC70 non-turbo FWD: 2530 lbs
XC70 non-turbo AWD: 2640 lbs
XC70 turbo AWD: 2640 lbs
XC70 non-turbo FWD: 1150 kg
XC70 non-turbo AWD: 1200 kg
XC70 turbo AWD: 1200 lbs
Curb weight 3840 - 4210 lbs 1735 - 1910 kg
Max. roof load 220 lbs 100 kg
08 Specifications
Specifications
08
296
Category USA Canada
Max. trailer weights Without brakes: 1650 lbs
With brakes, 1 7/8” ball: 2,000 lbs
With brakes, 2” ball: 3,300 lbs
Without brakes: 750 kg
With brakes, 1 7/8” ball: 900 kg
With brakes, 2” ball: 1500 kg
Max. tongue weight 165 lbs 75 kg
A Front Wheel DriveB All Wheel Drive
Engine specifications
Specification/Model 3.2 6-cyl. 3.2 6-cyl. 3.0TA
Engine designation B6324S5 B6324S4 B6304T2
Output (kW/rps) 179/107 171/108 224/93
Output (hp/rpm) 240/6400 230/6500 300/5600
Torque (Nm/rps) 320/53 300/55 440/35 – 70
Torque (ft. lbs./rpm) 236/3200 221/3300 325/2100 – 4200
No. of cylinders 6 6 6
Bore (in/mm) 3.3/84 3.3/84 3.23/82
Stroke (in/mm) 3.78/96 3.78/96 3.67/93.2
08 Specifications
Specifications
08
��
297
Specification/Model 3.2 6-cyl. 3.2 6-cyl. 3.0TA
Displacement 3.19 liters (194.8 cu. in.) 3.19 liters (194.8 cu. in.) 2.95 liters (175 cu. in.)
Compression ratio 10.8:1 10.3:1 9.3:1
A This engine may not be available on all markets
08 Specifications
Specifications
08
298
Engine oil
Engine oil must meet the minimum ILSACspecification GF-4, API SL, or ACEA A1/B1.Lower quality oils may not offer the same fueleconomy, engine performance, or engine pro-tection.
Volvo recommends Castrol.
Depending on your driving habits, premium orsynthetic oils may provide superior fuel econ-omy and engine protection. Consult your Volvoretailer for recommendations on premium orsynthetic oils.
Oil additives must not be used.
Synthetic oil is not used when the oil ischanged at the normal maintenance services.This oil is only used at customer request, atadditional charge. Please consult your Volvoretailer.
Oil viscosity
Incorrect viscosity oil can shorten engine lifeunder normal use. SAE 5W-30 will provide
good fuel economy and engine protection. Seethe viscosity chart.
G02
3491
Viscosity chart
Extreme engine operation
Synthetic oils meeting SAE 0W-30 or 0W-40and complying with oil quality requirements arerecommended for driving in areas of sustainedtemperature extremes (hot or cold), when tow-ing a trailer over long distances, and for pro-longed driving in mountainous areas.
American Petroleum Institute (API)
symbol
G02
2917
The API Service Symbol "donut" is divided intothree parts:
• The upper section describes the oil's per-formance level.
• The center identifies the oil's viscosity.
• The lower section indicates whether the oilhas demonstrated energy-conservingproperties in a standard test in comparisonto a reference oil.
08 Specifications
Specifications
08
��
299
Oil volume
Engine model Oil volume between MIN andMAX
Volume (incl. filter)
3.2 (6-cyl.) B6324S/S2 1.27 US qts (1.2 liters) 7.18 US qts (6.8 liters)
3.0T (6 cyl.) B6304T2 1.27 US qts (1.2 liters) 7.18 US qts (6.8 liters)
Other fluids and lubricants
Fluid System Volume Specification
Transmission oilA Automatic (TF-80SC) 5.8 US qts (5.5 liters) Transmission fluid BOT 341
Coolant 3.2 (6-cyl.) 9.4 US qts. (8.9 liters) Coolant with corrosion inhibitormixed with water (50/50 mix), seepackaging.3.0T 9.4 US qts. (8.9 liters)
Air conditioning All models 1.7 lbs (770 g) Refrigerant: R134a (HFC134a),PAG oil
Brake fluid 0.63 US qts (0.6 liters) DOT 4+
Power steering 1.26 US qts (1.2 liters) Power steering fluid WSSM2C204-A2 or equivalent product.
08 Specifications
Specifications
08
300
Fluid System Volume Specification
Washer fluid 6.8 US qts (6.5 liters)
4.7 US qts (4.5 litersB)
Use a washer antifreeze recom-mended by Volvo, mixed withwater.
Fuel tank volume 3.0T/3.2 6 cyl. 18.5 US gallons (70 liters)
A Under normal driving conditions the transmission oil does not need changing during its service life. However, it may be necessary under adverse driving conditions.B Models without headlight washers
Electrical system
General information
12 volt system with a voltage-regulated alter-nator. Single pole system in which the chassisand engine block are used as conductors. Thenegative terminal is connected to the chassis.
Performance, battery
Engine 3.2 6-cyl./3.0T
Voltage (V) 12
Cold start capacity (A) 520 – 700
Reserve capacity (min) 100 – 135
WARNING
PROPOSITION 65 WARNING!
Battery posts, terminals, and related acces-sories contain lead and lead compounds,chemicals known to the state of Californiato cause cancer and reproductive harm.Wash hands after handling.
CAUTION
If the battery is replaced, replace it with abattery of the same cold start capacity andreserve capacity as the original (see thedecal on the battery).
08 Specifications
Overview of information and warning symbols
08
��
* Option/accessory, for more information, see Introduction. 301
Introduction
The symbols in the vehicle's various displaysare divided into three main categories:
• Warning symbols
• Indicator symbols
• Information symbols
The following tables list the most commonsymbols, their meaning and the pages in thismanual that provide more detailed information.
Warning symbol
The red warning symbol lights up toindicate a problem related to safety and/ordrivability. A message will also appear in themain instruments panel's display.
Information symbol
The information symbol lights up and atext message is displayed to provide the driverwith necessary information about one of thevehicle's systems.
Symbols in the main instrument panel
Warning symbols
Symbol Description Page
Low oil pressure 76
A
Parking brake 76
SRS airbags 76
Seat belt reminder 77
Generator not charg-ing
77
A
Fault in the brakesystem
77
Warning symbol 77
A Canadian models
Indicator symbols
Symbol Description Page
Fault in the ActiveBending Light(ABL)*system
75
A
Malfunction indicatorlight
75
A
Anti-lock brake sys-tem (ABS)
75
Rear fog light on 75
Stability system(DSTC), Hill DescentControl,
75
Tire pressure monitor-ing sensor (TPMS)
75
Low fuel level 75
Information symbol,see text in informationdisplay
75
08 Specifications
Overview of information and warning symbols
08
302 * Option/accessory, for more information, see Introduction.
Symbol Description Page
High beam indicator 74
Left turn signal indica-tor
74
Right turn signal indi-cator
74
A Canadian models
Other information symbols
Symbol Description Page
Adaptive Cruise Con-trol *
164,169
Adaptive Cruise Con-trol *
164,169
Adaptive Cruise Con-trol *, Distance Alert*
164,169,171
Adaptive Cruise Con-trol *, Distance Alert*
164,169,171
Symbol Description Page
Adaptive Cruise Con-trol *
164,169
Adaptive Cruise Con-trol *, Distance Alert*
164,169,171
Adaptive Cruise Con-trol *, Distance Alert*
164,169,171
Adaptive Cruise Con-trol*
164,169
Radar sensor* 166
Camera* 177
Symbol Description Page
Collision Warning withAuto-brake*,
178
Driver Alert System* 180
Active Bending Lights(ABL)*
89
Fuel filler door (arrowindicates it is on rightside of vehicle)
74
Rain sensor* 94
Driver Alert System* 181
Driver Alert System*,Lane Departure Warn-ing*
183
Driver Alert System*,Lane Departure Warn-ing*
183
08 Specifications
Overview of information and warning symbols
08
* Option/accessory, for more information, see Introduction. 303
Information symbols in the center
console display
Symbol Description Page
Audio files 147
CD folder 147
Bluetooth-connectedcell phone
150
BluetoothTM hands-free
150
HD radio 141
Park Assist* 185
Information symbols in the ceiling
console
Symbol Description Page
Seat belt reminder 19
Occupant Weight Sen-sor
26
08 Specifications
Volvo programs
08
304
Volvo On Call Roadside Assistance
Your new Volvo comes with a four year ONCALL roadside assistance. Additional informa-tion, features, and benefits are described in aseparate information package in your glovecompartment.
If you require assistance, dial:
In the U.S. 1-800-638-6586 (1-800-63-VOLVO)
In Canada 1-800-263-0475
Technician certification
In addition to Volvo factory training, Volvo sup-ports certification by the National Institute forAutomotive Service Excellence (A.S.E.). Certi-fied technicians have demonstrated a highdegree of competence in specific areas.Besides passing exams, each technician mustalso have worked in the field for two or moreyears before a certificate is issued. These pro-fessional technicians are best able to analyzevehicle problems and perform the necessarymaintenance procedures to keep your Volvo atpeak operating condition.
09 Index
09
306
1, 2, 3 ...
12-volt sockets........................................ 198
A
ABS (anti-lock brake system).................. 115
Accessory installation warning.................. 13
Active chassis system............................. 159
Active yaw control................................... 157
Adaptive brake lights............................... 114
Adaptive cruise control.................... 162, 164
Airbagsdisconnecting the front passenger’sside................................................. 26, 27front...................................................... 22inflatable curtain................................... 32side impact........................................... 30
Air conditioning........................................ 132
Air distribution.......................................... 129
Air distribution table................................. 134
Air vents................................................... 129
All Wheel Drive......................................... 113
Anti-freeze....................................... 204, 262
Anti-lock brake system............................ 114warning light......................................... 74
Anti-lock Brake System (ABS)................. 115
Approach lighting................................ 56, 92
Audio systemaudio functions................................... 136CD player/changer.............................. 147HD digital radio................................... 141overview.............................................. 135radio functions.................................... 137Sirius satellite radio............................ 143sound settings.................................... 136steering wheel keypad........................ 135USB/iPod connector........................ 139
Auto-dim rearview mirror......................... 100
Automatic locking retractor....................... 37
Automatic transmissionGeartronic........................................... 112general description..................... 111, 112oil........................................................ 299shiftlock override................................ 112
Axle weight.............................................. 236
B
Batterychanging............................................. 274maintenance............................... 273, 274remote key, replacing........................... 59specifications...................................... 300warning symbols................................. 273
Black box................................................... 11
Blind Spot Information System(BLIS)....................................... 192, 193, 194
Bluetooth cell phone connection............. 149
Booster cushion, integrated...................... 48
Booster cushions....................................... 44
Brake lights.............................................. 114
Brake systemchecking fluid level............................. 262emergency brake assistance.............. 115fluid..................................................... 299general information............................. 114Hill Descent Control............................ 119warning light......................................... 76
Bulbscargo area lighting.............................. 269headlights........................... 264, 265, 266introduction......................................... 264
09 Index
09
307
license plate lights.............................. 269side marker lights............................... 267specifications...................................... 270taillight................................................ 268
C
Camera, Park Assist................................ 189
Capacity weight....................................... 236
Cargo areachanging bulbs................................... 269floor rails............................................. 213hooks for securing loads............ 213, 214steel grid............................................. 216
Cargo area cover..................................... 217
Cargo area net......................................... 217
Catalytic converter................................... 209
CD player/changer................................... 147
Cell phone, hands-free connection......... 149
Central locking system, introduction......... 54
Chains...................................................... 239
Check engine light..................................... 74
Child restraintsrecalls and registration......................... 47
Child restraint systems.............................. 38booster cushions.................................. 44convertible seats.................................. 42infant seats........................................... 40ISOFIX/LATCH anchors........................ 45top tether anchors................................ 46
Child safety.......................................... 36, 37booster cushions.................................. 44child restraint systems.......................... 38convertible seats.................................. 42infant seats........................................... 40
Child safety locks...................................... 51
Climate system........................................ 132air distribution............................. 129, 134air vents.............................................. 129Interior Air Quality System.................. 129introduction......................................... 128passenger compartment filter............ 128refrigerant........................................... 128
Clock, setting............................................. 78
Cold weather driving................................ 204
Collision warning system......................... 174
Compass in rearview mirror..................... 101
Conserving electrical current................... 203
Convertible seats....................................... 42
Coolant............................................ 262, 299
Cooling system, general information....... 203
Courtesy lighting.................................. 91, 92
Crash mode............................................... 35
Cruise control.................................. 160, 161adaptive.............................................. 162
Curb weight............................................. 236
Current, conserving................................. 203
D
Defroster.................................................. 132
Detachable key blade.......................... 58, 61
DimensionsXC70................................................... 294
Disconnecting the front passenger’s air-bag....................................................... 26, 27
Dome lighting....................................... 91, 92
Door mirrors............................................... 99
Driver alert............................................... 180
Driver distraction warning.......................... 13
Driving economically................................ 202
Driving in cold weather............................ 204
Driving through water.............................. 203
09 Index
09
308
E
ECC......................................... 130, 132, 133
Economical driving.................................. 202
Electric parking brake.............................. 116
Electronic Climate Control....... 130, 132, 133air distribution table............................ 134Interior Air Quality System.................. 133ventilated seats................................... 130
Emergency locking retractor...................... 37
Emergency starting.................................. 109
Emergency towing........................... 222, 223
Emission inspection readiness................ 257
Engineoverheating........................................... 77specifications...................................... 296starting................................................ 107switching off....................................... 109
Engine compartment overview................ 259
Engine oilchecking............................................. 260low pressure warning light.............. 75, 76specifications...................................... 298volumes.............................................. 299
Environment............................................... 12
Eyelets for anchoring loads..................... 213
F
Federal Clean Air Act............................... 256
Floor rails................................................. 213
Fluid specifications.................................. 299
Fog lightsfront, changing bulbs.......................... 268front/rear............................................... 90
Four C (active chassis system)................ 159
Front airbags.............................................. 22disconnecting passenger’s side air-bag.................................................. 26, 27
Front fog lights........................................... 90changing bulbs................................... 268
Front park assist.............................. 185, 187
Front seats........................................... 81, 83heated................................................. 130
Fuel filler cap........................................... 209
Fuel filler door, opening........................... 208
Fuel level warning light.............................. 75
Fuel requirements............................ 206, 207
Fuel tank volume..................................... 299
Fuses............................... 276, 277, 280, 283
G
Gasoline requirements............................. 207
Gas tank volume...................................... 299
Gauges...................................................... 73
Geartronic................................................ 112
Geartronic automatic transmission.......... 112
Generator warning light............................. 76
Glossary of tire terminology..................... 235
Grocery bag holder.................................. 215
Gross vehicle weight............................... 236
H
Hazard warning flashers............................ 90
HD digital radio........................................ 141
HeadlightsActive Bending Lights........................... 89changing bulbs........................... 265, 266high/low beams.................................... 88high beam flash.................................... 88
09 Index
09
309
Headlight washers..................................... 95
Head restraints, rear seat.......................... 84
Heated front seats................................... 130
Heated oxygen sensors........................... 210
Heated rear seats.................................... 131
High beams................................................ 88indicator light........................................ 75
Hill Descent Control................................. 119
Hoisting the vehicle................................. 257
Home safe lighting..................................... 92
Hood, opening/closing............................ 259
Horn........................................................... 87
I
Ignition modes........................................... 79
Immobilizer................................................ 55
Important information.................................. 8
Indicator lights......................... 73, 74, 75, 76
Infant seats................................................ 40
Inflatable Curtain........................................ 32
Inflation pressure..................................... 229
Inflation pressure tables.................. 231, 232
Information and warning symbols, tableof.............................................................. 301
Information lights..................... 73, 74, 75, 76
Information symbol.................................... 75
Inspection readiness................................ 257
Instrument lighting..................................... 88
Instrument overview............................ 72, 73
Instrument panel...................................... 126
Integrated two-stage booster cushion...... 48
Interior Air Quality System....................... 129
Interior lighting..................................... 91, 92
iPod connector (audio system)............. 139
ISOFIX/LATCH anchors............................. 45
J
Jackattaching............................................. 248location of........................................... 247
Jump starting........................................... 109
K
Key blade................................. 54, 58, 61, 62private locking...................................... 61
Keyless drivegeneral description............................... 62starting the vehicle............................. 107
L
Labelslist of................................................... 293location of........................................... 292
LATCH anchors......................................... 45
Leather care............................................. 286
Lighting panel............................................ 88
Load anchoring eyelets........................... 213
Loadingfloor rails............................................. 213hooks for securing loads............ 213, 214
Loading the vehicle.......................... 211, 236roof loads............................................ 215
Locking...................................................... 65tailgate.................................................. 66
Locking the vehicle.................................... 56
09 Index
09
310
Locks, child safety..................................... 51
Low beams................................................ 88
Low fuel level warning light........................ 75
Low oil pressure warning light................... 76
M
Main instrument panel............................. 126
Maintenance............................................ 256hoisting the vehicle............................. 257performed by the owner..................... 257
Malfunction indicator light......................... 74
Menu system........................................... 124overview.............................................. 124
Messages in the instrument panel........... 126
Mirrorsdefroster............................................. 100power door........................................... 99rearview, auto-dim function................ 100retractable............................................. 99vanity.................................................. 198
Moonroof................................................. 102
Motor oilchecking............................................. 260specifications...................................... 298volumes.............................................. 299
N
Net in cargo area..................................... 217
O
Occupant safety........................................ 16
Occupant weight sensor...................... 26, 27
Octane recommendations....................... 207
Odometer, trip........................................... 78
Oilchecking............................................. 260specifications...................................... 298volumes.............................................. 299
On Call Roadside Assistance.................. 304
Overhead courtesy lighting.................. 91, 92
Overheating, engine................................... 77
Oxygen sensors, heated.......................... 210
P
Paint, touching up.................................... 287
Park assist....................................... 185, 187
Park Assist Camera................................. 189
Parking brakeelectric, applying/releasing................. 116warning light......................................... 76
Parking lights............................................. 89changing bulbs................................... 267
Personal Car Communicator, unique func-tions........................................................... 57
Polishing.................................................. 285
Power front seatmemory function................................... 82with keyless drive................................. 83
Power mirrors............................................ 99defroster............................................. 100
Power moonroof...................................... 102
Power steeringfluid..................................................... 263speed-dependent............................... 159
Power steering fluid................................. 299
Power tailgate.......................................... 211
09 Index
09
311
Power windows......................................... 97laminated glass..................................... 98
Pregnancy, using seat belts during........... 20
Private locking........................................... 61
PROPOSITION 65 WARNING.. 109, 275, 300
R
RadioSirius satellite radio............................ 143
Radio functions........................................ 137HD digital radio................................... 141
Rails, floor................................................ 213
Rain sensor................................................ 94
READ button............................................ 126
Rear fog light............................................. 90
Rear park assist............................... 185, 187
Rear seat head restraints........................... 84
Rear seatscenter head restraint............................. 84folding................................................... 84heated................................................. 131
Rearview mirrorauto-dim function............................... 100compass............................................. 101
Rear window defroster............................ 100
Recalls, child restraints.............................. 47
Refrigerant............................................... 299
Refueling.......................................... 206, 207fuel filler cap....................................... 209fuel filler door...................................... 208fuel tank volume................................. 299
Registering child restraints........................ 47
Remote controlprivate locking...................................... 61
Remote key................................................ 54approach lighting.................................. 56immobilizer........................................... 55key blade.................................. 54, 58, 61key memory.......................................... 55locking the vehicle................................ 56Personal Car Communicator.......... 56, 57replacing the battery............................. 59unlocking the vehicle............................ 56
Remote key/PCCcommon functions................................ 56
Reporting safety defects............................ 17
Roadside Assistance............................... 304
Roof loads............................................... 215
S
Safety, occupant........................................ 16
Safety defects, reporting........................... 17
Seat beltreminder................................................ 19
Seat beltsAutomatic locking retractor/Emergencylocking retractor.................................... 37buckling................................................ 18maintenance......................................... 18pretensioners........................................ 18reminder................................................ 18reminder warning light.......................... 76securing child restraint sys-tems.......................................... 40, 42, 44unbuckling............................................ 18use during pregnancy........................... 20using..................................................... 18
Seats, front.......................................... 81, 82
Side door mirrors....................................... 99
Side impact airbags................................... 30
Side marker lights, changing bulbs......... 267
09 Index
09
312
Sirius satellite radio.................................. 143
Snow chains............................................ 239
Snow tires................................................ 239
Sound settings, audio system................. 136
Spare tire................................................. 240
Speed-dependent steering...................... 159
Spin control............................................. 157
SRS............................................................ 21
Stability system............................... 157, 158indicator light........................................ 75
Starting the engine.................................. 107with keyless drive............................... 107
Starting the vehicleafter a crash (crash mode).................... 35
Start inhibitor (immobilizer)........................ 55
Steel grid in cargo area............................ 216
Steering wheeladjusting............................................... 87horn....................................................... 87keypad.................................. 87, 124, 135
Stone chips, touching up......................... 287
Storage spaces........................................ 196
Studded tires........................................... 239
Sunroof (moonroof).................................. 102
Supplemental restraint system.................. 21warning light......................................... 76
Symbols, overview................................... 301
T
Tailgatedriving with it open............................. 202locking/unlocking.................................. 66power operated.................................. 211wiper/washer........................................ 95
Tailgate wipers......................................... 272
Taillights, changing bulbs........................ 268
Temporary spare tire............................... 240
Three-way catalytic converter................. 209
Tire designations..................................... 233
Tire Pressure Monitoring System.... 250, 251indicator light........................................ 75
Tires......................................................... 226age...................................................... 226changing from summer to winter........ 227glossary of terms................................ 235improving economy............................ 226inflation pressure................................ 229inflation pressure tables............. 231, 232
load ratings......................................... 230rotation............................................... 227snow................................................... 239spare................................................... 240specifications...................................... 230speed ratings...................................... 230storing................................................. 227studded............................................... 239tire pressure monitoring system......... 250tread wear indicator............................ 228uniform tire quality grading................. 238
Top tether anchors (child restraint sys-tems).......................................................... 46
Touching up paint.................................... 287
Towing a trailer................................ 220, 221trailer hitch.......................................... 221
Towing the vehicle........................... 222, 223
Traction control........................................ 157
Trailer towing................................... 220, 221trailer hitch.......................................... 221
Transmissiongeneral description..................... 111, 112oil........................................................ 299shiftlock override................................ 112
Tread wear indicator................................ 228
Trip computer.......................................... 155
09 Index
09
313
Trip odometers.......................................... 78
Trips, long distance................................. 204
Turn signals............................................... 91changing bulbs................................... 267indicator lights...................................... 75
Two-stage booster cushion....................... 48
U
Uniform Tire Quality Grading................... 238
Unlocking the tailgate................................ 66
Unlocking the vehicle.......................... 56, 65
Upholstery care....................................... 286
V
Vanity mirror............................................ 198changing bulbs................................... 269
Vehicle dimensionsXC70................................................... 294
Vehicle Event Data..................................... 11
Vehicle loading................................ 211, 236roof loads............................................ 215
Vehicle maintenance................................ 256performed by the owner..................... 257
Vehicle weights........................................ 295
Ventilated seats....................................... 130
Volvo and the environment........................ 12
Volvo maintenance.................................. 256
Volvo On Call Roadside Assistance........ 304
Volvo programs....................................... 304
W
Warning flashers, hazard........................... 90
Warning lights.......................... 73, 74, 75, 76
Warning symbol......................................... 77
Warning system, collision........................ 174
Warranties................................................ 256
Washer fluid..................................... 272, 299
Washersheadlight............................................... 95windshield............................................. 94
Water, driving through............................. 203
Waxing..................................................... 285
Weights.................................................... 295
Wheels..................................................... 226changing..................................... 247, 248storing................................................. 227
Whiplash Protection System..................... 33
Windowspower.................................................... 97
WindshieldIR coating............................................. 96rain sensor............................................ 94washers................................................ 95wipers/washers..................................... 94
Windshield washer fluid................... 272, 299
Windshield wipers.................................... 271
Wiper bladesreplacing tailgate wiper...................... 272replacing windshield wipers............... 271