VOLUMETRIC PUMP PU1 - PU2 SERIES

Doc: Rev: Date: Page:

BRO-PU-eng 00 July 2013 1/2

Zipfluid srl

Sede legale / Registered office: Via Giardini 431/E - 41124 Modena - Italy

Sede operativa / Operational headquarters: Via Commenda, 2 - 40012 Calderara di Reno (BO) - Italy

Ph +39 051 0259202 - Fax +39 051 6124790 Web site: www.zipfluid.com - E-mail: info@zipfluid.com

VOLUMETRIC PUMP PU1 - PU2 SERIES

Doc: Rev: Date: Page:

BRO-PU/PG-eng 00 July 2013 1/2

Technical specifications

Sizes: 2” – 2½” – 3” - 4”

Self-adjust wear blade

Built-in adjustable by-pass

Mechanical seals

Ball bearing construction

Easy maintenance

Lay out: left or right hand

Max operating temperature 150 °C

Max operating viscosity 2200 cSt

PTFE seals for solvents (PU2)

Rotor shaft in AISI304 for solvents (PU2)

Size Flow rate in liters per minute @ rpm Power (in kW)required for ΔP 3,5 bar

2” min 220 - max 300 520 – 720 1,5 – 2,2

2½” min 350 - max 500 450 - 650 2,2 – 4,0

3” min 750 - max 1000 500 – 650 5,5 – 7,5

4” min 1500 - max 1900 400 - 500 11,0 – 15,0

Volumetric, rotary, self-

priming Zipfluid vane

pump series PU is

suitable for fuels (PU1)

and solvents (PU2). It can

be installed on trucks,

plants, marine or aviation

groups, coupled with

electrical, hydraulic or

diesel motors.

Standards and regulations

ATEX 94/9/EC Directive

PED 97/23/EC Directive

API–ASTM–ANSI-TTMA standards for pipes, flanges, elbows and fittings

Dimensions in mm.

A = 1100-2000 (std 1400)

B = 1500-4500 (std 2300)

C = 600

Accessories

Square flanges (inlet/outlet), socket weld type, in carbon steel

Inlet filter

Power Take Off flanged connection

Bell housing for hydraulic motor

Hydraulic motor

PUMPING GROUP PG10 – PG20 series

Doc: Rev: Date: Page:

BRO-PU/PG-eng 00 July 2013 2/2

Zipfluid srl

Sede legale / Registered office: Via Giardini 431/E - 41124 Modena - Italy

Sede operativa / Operational headquarters: Via Commenda, 2 - 40012 Calderara di Reno (BO) - Italy

Ph +39 051 0259202 - Fax +39 051 6124790 Web site: www.zipfluid.com - E-mail: info@zipfluid.com

Size Driven Flow rate (lpm) Head (meters) Power kW (Hp) Ordering code

2” Belts 220 A 1,5 (2,0) A

2” Belts 300 B 2,2 (3,0) B

2½” Belts 300 30 2,2 (3,0) A

2½” Belts 500 35 4,0 (5,5) PG12.065B0500.040-YY00

3” Belts 750 30 5,5 (7,5) A

3” Belts 1000 25 5,5 (7,5) B

3” Belts 1000 35 7,5 (10,0) C

2” Gearbox A A A A

2” Gearbox B B B B

2” Gearbox C C C C

2½” Gearbox 500 A A A

2½” Gearbox B B B B

2½” Gearbox C C C C

3” Gearbox 1000 A A A

3” Gearbox B B B B

3” Gearbox C C C C

4” Gearbox 1300 50 15,0 (20,0) A

4” Gearbox 1500 40 15,0 (20,0) B

4” Gearbox 1900 30 11,0 (15,0) C

4” Gearbox 1900 45 15,0 (20,0)

4” Gearbox 1900 55 18,5 (25,0)

PG Pumping Groups are assembled with

series PU pumps, suitable for fuels and

solvents, coupled with electric or diesel

engines on galvanized carbon steel

base. They can be installed on plants,

marine or aviation groups, in stationary

or movable assets

Accessories

Start / Stop button

PD meter

Engine types

Electrical: IP 65 - II 2 G - II 3 G

Diesel: manual start - electrical start

Coupling method

Belts and pulleys

Gearbox