VOLUMEC - Hydraulics€¦ · VOLUMEC Indicator AVC 02 Function Together with the gear type volume...

VOLUMECValve Position Indicator 02/04

VOLUTRONIC®

Valve Position Measuring Instrument 0.2

VOLUMEC Valve Position Indicator 02/04

KRACHT GmbH · Gewerbestr. 20 · 58791 Werdohl, Germany · fon +49(0)23 92/935-0 · fax +49(0)23 92/935 209 · mail [email protected] · web www.kracht.eu2

Description

Modular design

VOLUMEC Indicator

AVC .. A Optically

AVC .. B Open/close switches

AVC .. C/CL Potentiometer

AVC .. D/DL Open/close switches and potentiometer

AVC .. E/EL Potentiometer with delay

The Valve Position Indicator VOLUMEC is a combinationunit with mounting surface for directional control valvesNG 06 according to ISO 4401-03-02-0-02/DIN 24340-A6.In detail the module consists of a hydraulic manifold,a gear type volume counter and an indicator.

Mounted on a connection plate and completed by adirectional control valve the VOLUMEC enables to control hydraulic operating ship armatures for ballast-, cargo- and stripping systems of all kind oftankers. In addition to that the adjusting path of thearmature will be measured and displayed.

The Valve Position Indicator is suitable for the installa-tion into deck boxes. The indication of the volumetricentered armature position can be readoff optically locally or can be taken electrically bypotentiometers or open / closed switches.

AVC .. A

AVC .. B

AVC .. C/CL

AVC .. D/DL

VCMHB 4

directional control valveDIN NG 06 / CETOP 03

Mounting surface accordingto ISO 4401

Mounting plate NG 06

Mounting surface accordingto ISO 4401

AVC .. E/EL

Hydraulic manifold HB 4

Gear type Volume counterVCM 02/04

Indicator AVC 02

Hydraulic manifoldGear typevolume counter

Indicator

Application examples

KRACHT GmbH · Gewerbestr. 20 · 58791 Werdohl, Germany · fon +49(0)23 92/935-0 · fax +49(0)23 92/935 209 · mail [email protected] · web www.kracht.eu 3

VOLUMEC Valve Position Indicator 02/04

Nut 1.2 x 2.4

Direct operated directional valve

SW 13

Angled connectorseries 723, 5 pins,waterproof, has to beordered separately

open

shut

Gear typeflow meterwith indicator

open

shutMounting surfaceISO 4401/DIN 24340-A6

Mounting plate

5 bar

Hydraulic manifold

Mounting surfaceISO 4401/DIN 24340-A6


Pmax = 240 bar

Application examplesfor 4/3 directional valves spring centred (function 0311)

Main dimensionsScheme


Nut 1,2 x 2,4

SW 13

Angled connector series 723,5 pins, waterproof, has to beordered separately


Nut 1.2 x 2.4

SW 13

Angled connector series 723,5 pins, waterproof has to beordered separately

open

shut

5 bar

Mounting plate

Hydraulic manifold




open

shut

Pmax = 240 bar


Application examplesfor 4/2 directional valves with detend (function 0324)

Application examplesfor 4/2 directional valves spring return (function 0324)



Hydraulic manifold

Mounting plate

5 bar

Mounting surfaceISO 440100/DIN 24340-A6open

shut


open

shut

Pmax = 240 bar


VOLUMEC Indicator AVC 02

Function

Together with the gear type volume counter the indicator builds the measuring unit. The turning of thegear wheels is transferred via a magnetic drive to thegear box of the indicator. For each application theturndown ratio of the gear box is configurated to geta pointer movement of approx. 180°. The pointer islimited by two end stops. To reset the indication ateach end position a slipping clutch is integrated.The driving shaft of the magnetic drive is equippedwith a small indication to recognize the movement ofthe gear wheels. It can be used as leakage detection.

The indicator is completely separated from thehydraulic circuit. The housing of the indicator consistsof seawater resistant aluminium, all fixing materialsare made of A2.


Type code – Indicator

Ordering example

AVC 02 A 1 O 1 U ... :1

Construction code

Product name

Nominal size02 for VCM 02 and VCM 04

Reduction gear unite.g. U 98.3 : 1(will be selected by KRACHT)

Electrical connectionO without electrical connectionA Electrical connector series 723, 5 pins

(standard)

Z Electrical connector DIN EN 175301-803(former DIN 43650)

Design1 Design – AIMgSi1 (standard)2 Design – CuZn35Ni

Indicator typeA opticallyB optically, with open / close switchesC optically, with wirewound potentiometerCL optically, with conductive plastic potentiometerD optically, with open / close switches and wirewound potentiometerDL optically, with conductive plastic potentiometer and open / close switchesE optically, with wirewound potentiometer with delayEL optically, with conductive plastic potentiometer with delay

VOLUMEC Indicator AVC 02

Electric installation – Indicator type B

Electric installation – Indicator type D, DL

6

45

openshut

3

2 4

51

braun

weiß

grün

6

45

openshut

3

2 4

51

2

1 3

grau

gelb

braun

6

45

openshut

3

2 4

51

2

1 3

grau

gelb

braun

weiß

grün

Miniature round connector Contact plateserie 723Contact arrangements,view to the solder-contacts

OS

O = OpenS = Shut

Electric installation – Indicator type C, CL + E, EL

Miniature round connector Potentiometer Contact plateserie 723Contact arrangements, Open ca. 800 Ohmview to the solder-contacts Shut ca. 220 Ohm

OS

O = OpenS = Shut

OS

O = OpenS = Shut

Miniature round connector Potentiometer Contact plateserie 723Contact arrangements, Open ca. 800 Ohmview to the solder-contacts Shut ca. 220 Ohm


Electrical data wirewound conductive plasticpotentiometer potentiometer(C, D, E) (CL, EL, DL)

Nominal resistance R 1 K Ω 1 K ΩResistance tolerance ± 10 % ± 20 %Linearity ± 1.0 % ± 2 %Max. wiper currenin case of malfunction 100 mA 1 mAPower rating P 1 W/85 °C (195°F) 0.2 W to 55°C (131°F)Dielectric strength 900 VAC /1 min 500 Veff /1 minInsulating resistance 10 G Ω at 500 V DC >1 G Ω at 500 V DCResistance resolution 0.37%

Ambience conditionsOperating temperature -- 55 °C ... +150 °C -- 55 °C ... +105 °C

(-- 131°F ... +302°F) (-- 131°F ... +221°F)Climatic rating 55/150/56Degree of protection IP 67Vibration 10 G

(30--2000 Hz, 0,75 mm)Shock 50 G (half sine pulse, 7 ms)

Technical data potentiometer

2.5Ø 48

69.2

7

offe

nzu

3

45

Ø 9

-0.5

48 30

12 56

80

Indicator without angled connector (Indicator type A)

Dimensions

offe

nzu M

16x0

.75

11.5

3

45

Ø 9

-0.5

48 30

12 56

80

Miniatur Rundstecker Serie 7235-polig, wasserdicht

female angeled connector series 723, 5 pins,waterproof; part-no.: L.0012050006

Pg 9

31.5

19

47

44

2.5

Ø 48

69.2

7

Winkeldose Serie 723, 5-polig, wasserdichtTeile-Nr.: L.0012050006

muss separat bestellt werden

Indicator with angled connected(Indicator type B, C, CL, D and E)

Weight: 0.6 kg Weight: 0.6 kg

Green

White

Brown

Green

White

Brown

Yellow

Grey

Brown

Yellow

Grey

Miniature round connector serie 7235 pins, waterproof

Angled connector serie 723, 5 pins, waterproof,Part No.: L.0012050006

has to be ordered separately

shut

op

en

shut

op

en


Function

VOLUMEC Gear Type Volume Counter VCM 02/04

The gear type flow meter can be used with all knownhydraulic fluids, which have a minimum lubricity, arenot agressive concerning the used materials(housing-cast iron, bearing-multicomponent, steelgears, NBR- or FPM seals).

Hydraulic characteristics

Geom. tooth volume VCM 02 Vgz = 0,25 cm3

VCM 04 Vgz = 0,5 cm3

No. of teeth Z = 9

Operating pressure pe max = 200 bar(for a short time220 bar, e.g. atstarting conditions)

Max. flow rate VCM 02 Q = 4 l/minVCM 04 Q = 7 l/min

Viscosity νmin = 20 mm/sνmax = 380 mm/s

(higher viscotitieson request)

Fluids Mineral oil acc. to DIN 51524/25other fluids on request

General characteristics

Design Gear motor

Connection Flange

Weight VCM 02 = 0.8 kgVCM 04 = 1.0 kg

Mounting position optional

Dimensions see page 7

Ambient temperature ϑm min = -- 20 °C (-- 4°F)ϑm max = + 60 °C (+ 140°F)

Liquid temperature ϑm min = -- 20 °C (-- 4°F)ϑm max = + 80 °C (+ 176°F)

The movement of the gears is transferred to the indicator by a permanent-magnetic coupling. There is no connection between the indicator and thehydraulic circuit.The volume counter with connected indicator is suitablefor installation in deck-boxes.

Type code – Volume counter

Ordering example

VCM 02 N 1 P 1 S

Function S StandardR with detend

Connection type P Plate mounted

Design 1 GG 25/AL2 GG 25/BZ

Seal N NBRF FKM

Nominal size 02 · 04

Product name

Construction code

VOLUMEC Gear Type Volume Counter VCM 02/04


��

� � ��

�

��

Dimensions VCM 02 ... S (Standard) Dimensions VCM 04 ... S (Standard)

Mounting surface VCM 02/04

Bore hole for nozzleM6-6 deep

20

28

2 x Ø 9

40

5612

30

139

105

80

48

M8 -14 deep

Dimensions VCM 02 ... R (with detend)

��

� � ��

�

��

Function 0311

– double pilot operated check valve for holding the actuator position

– two pressure relief valves for limiting the pressurecaused by increased temperature

– throttle valve in port A for speed regulation of theactuator

– check valve for filling the piping to avoid wrong indications when temperature fluctuates

VOLUMEC Hydraulic Manifold HB 4


Mounting surface ISO 4401/ DIN 24340-A6

Nominal size 06

Name Control module

Design Sandwich-seatvalve

Type of fixation Flange

Type of connection Mounting plate

Dimensions see page 10

Mounting position optional

Flow direction see schema page 9

Ambient temperature ϑmin = -- 20 °C (-- 4°F)ϑmax = + 60 °C (+ 140°F)

Liquid temperature ϑm min = -- 20 °C (-- 4°F)ϑm max = + 80 °C (+ 176°F)

Weight HB 4.0311.. 5.2 kg

Weight HB 4.0324.. 3.9 kg


Operating pressure pmax = 200 bar

Pressure relief valve pmax DBV = 240 bar

Flow rate 6 l/min (10 l/min)

Viscosity νmin = 13 mm2/sνmax = 380 mm2/s

Fluids Mineral oil acc. to DIN 51524/25other fluids on request


– check valve in P for holding the actuator positionwhen switching parallel actuators

– check valve in T to avoid indicator fluctuations due to pressure pulsation

– one temperature pressure relief valve for limitingthe pressure caused by increased temperature

– throttle valve in port A for speed regulation of the actuator

– check valve for filling the piping to avoid wrong indications when temperature fluctuates

Function 0324


Function


Scheme 0311 Scheme 0324

Type code – Hydraulic manifold

Ordering example

HB 4 A 0311 A . –

Temperature relatedpressure reliefpDBV = pOperation + 40 bar(pDBV max. = 240 bar)

Function 0311 · 0324

Design

Product name

Design status

Sealwithout specification = NBRFKM = FKM


HB 4 . 0311 . .

HB 4 . 0324 . .


Dimensions

M8

-14

deep

M8

-14

deep

Mounting

surface VC 0.2

Mounting surface acc. to

ISO 4401/DIN 24340-A6

Mounting surface acc. to

ISO 4401/DIN 24340-A6

Mounting

surface VC 0.2


VOLUTRONIC® Valve Position Measuring Instrument VCA 0.2 NB P2/154

Description

Mounting surface

shift and enables the recognition of the flow direction.The VOLUTRONIC® Valve Position Measuring InstrumentVCA 0.2 can be used for a big range of actuatordimensions and Flow rate.

Materials

Housing and cover Aluminium AlMgSiF30

Gearing Stainless steel 1.4462


Bearing Plastic plain bearings

Connection type Plate mounting


Measuring range 0.25 ... 10 l/min

Repeat accuracy < 0.3 %

max. operating pressure 160 bar

Liquid temperature -- 20 ... +80 °C

Resolution 5000 pulse/liter

Ø 6,5O-Ring Ø 9,25 x 1,78 NBR

Dimensions

Status indicator(2 LED)

Now in the segment of the VOLUMEC Valve PositionIndicators we offer beside the mechanical variation theelectronic solution; the VOLUTRONIC ® Valve PositionMeasuring Instrument VCA 0.2 NB P2/154. The electro-nic solution provides 2 incremental signals with 90° phase


VOLUTRONIC® Valve Position Measuring Instrument 0.2

Signal characteristics

Channel IA rising edge

B one pulse (corr. to flow rateof geom. tooth volume Vgz)

C falling edge

D ON phase

E OFF phase

F pulse duty factor 1 :1 ± 15 %

Channel IIG channel offset

H flow direction 1

K reversal of flow direction

J flow direction 2

B

C

D

E

F

G

1

A

13

2 4

II

I

90°

±30°

±15°

K

H J

UA

UA

Electrical characteristics

Number of measuringchannels 2

Operating voltage UB = 12 ... 30 V DCpolarized

Pulse amplitude Uout ≥ 0.8 Uop

Pulse shape withsymm. output signal square wave

pulse duty factor /channel1:1 ± 15%

Signal output PNP (NPN on request)

Pulse offset betweentwo channels 90° ± 30°

Power requirement Pb max = 0.9 W

Output power/channel Pa max = 0.3 Wshort-circuit-proof

Degree of protection IP 65 DIN 40050

Status indicator to blink = all right(2 LED) LED off = failure

Electrical connection

Signal output channel 1

Signal output channel 2

24 volt (brown)

Channel 1 (green)

Channel 2 (yellow)


VOLUTRONIC® Valve Position Measuring Instrument VC 0.2 P1 PX ATEX

Explosion-proof version (ATEX)

Dimensions

Mounting surface

Materials

Housing and cover Spheroidal cast iron GGG 40

Gearing Steel 1.7139


Bearing Ball bearings

Connnection type Plate mounting


Measuring range 0.16 ... 16 l/min

Repeat accuracy < 0.1%

Starting point 0.01 l/min

max. operating pressure 400 bar

Liquid temperature -- 30 ... + 80 °C

Resolution 4081.63 pulse/liter

The device fulfils the following protective classes:

II 2 G EEx ia IIC T4II 2 D Ex iaD 21 T 125 °CII 2 GD C IIC T4 IP65 T 125 °C

tightenig torque for fixing screws 14 Nm

O-Ring 10.82 x 1.78 FEP

70

40

M 6

20

Description

provides together with the switching amplifier K 130two incremental signals with 90° phase shift andenables the recognition of the flow direction.

For the valve positions which must be used in intrinsi-cally safe areas (example: Gas tankers) we offer theVOLUTRONIC ® Valve Position Measuring InstrumentVC 0.2 P1 PX ATEX. Also the explosion-safe execution


Explosion-Proof Design (ATEX)

Function

• VOLUTRONIC ® Valve Position Measuring Instrumentand switch amplifier are connected electrically witheach other. The switch amplifier evaluates the sensorsignals of the Valve Position Measuring Instrumentand converts them into square-wave signals.

• Without switch amplifier the VOLUTRONIC ® ValvePosition Measuring Instrument may be pursued notin the explosion-threatened area.

• Between Valve Position Measuring Instrument andswitch amplifier cable lengths to 400 m are possible.

• In the switch amplifier are LED's to the control of manage-ment break/short circuit, canal-switch state and tension care.

• The explosion-protected execution passes of theVOLUTRONIC ® Valve Position Measuring InstrumentVC 0.2 P1 PX-ATEX (own-sure electric equipment)and the switch amplifier K 130 (accompanyingelectric equipment). To this construction countsthe type of protection ”intrinsic safety”.

• The VOLUTRONIC ® Valve Position MeasuringInstrument is installed in the explosion-threatenedarea.

• The assembly of the switch amplifier K 130 occursin the sure area.

VOLUTRONIC® Valve Position Measuring Instrument 0.2

Technical data of switching amplifier K-130/3-E-10

Power supplySupply voltage cl. 7 (L+), cl. 10 (L--) DC 24 volt ± 20 % Ripple content white Wss < 10 %

Outputs (non-intrinsically safe)Characteristics cl. 9, 12, 8, 11Electronics outputs electrically isolated via optoelectronic couplerShort-circuit current approx. 25 mASignal level 1-signal 0.8 x supply voltage with RL > 2 k ohmSignal level 0-signal inhibited output, residual current < 10 uA

Ambience conditionsMinimum limiting temperature 248 K (-- 25 °C)Maximum limiting temperature 333 K (+ 60 °C)

MechanicsDimensions 107.5 x 92 x 22 mmConnection possibility can be snapped on a 35 mm mounting channel DIN 46277Weight approx. 150 g

1011

12

78

9

45

6

12

3

1

23

Safe area

K 130

II (2) G [EEx ia] IIC PTB 03 ATEX 2094 X II 2 GD EEx ia IICT4 PTB 03 ATEX 2249

VC

Potentially explosive atmosphere

Channel 2

24 volt7, 8 and 9 jumpered

shield

green yellow0 volt

white

brown

yellowgreenPA

brown white

Channel 1

NoteThis graph is an example only. National laws for potentially explosive areas must be considered.


Recording of the application datas for KRACHT Valve positions indicators components

Customer

Quantity Fluid

Viscosity mm2⁄s Flow rate l/min

Actuator displacement cm3 operating pressure bar

Setting of temperature bar Liquid temperature °Cpressure relief valve(by application hydraulicmanifold)

Environment temperature °C Distance between mVolumec and Valve

Inner diameter of piping mm zone, in case ofhazardous area

Needed output Armatur

VOLUTRONIC® Pulse output type of armatur name of producer

indication single acting actuator(spring return)

indication + double acting actuatoropen/close (Rack and pinion)switches

VOLUMEC indication + double acting actuatorrpotentiometer (Scotch yoke)

indication + linear actuatoropen/close (spring return)switches +potentiometer

if potentiometer, max. mA closing time of the sec.wiper current actuator

Function of directional 4/3 spring centeredcontrol valve

4/2 with detend

4/2 spring return


Notice

KRACHT GmbH · Gewerbestraße 20 · 58791 Werdohl, Germany · fon +49 (0) 23 92 / 935-0 · fax +49 (0) 23 92 / 935 209

mail [email protected] · web www.kracht.eu

Transfer PumpsTransfer pumps for lubricating oil supply equipment, low pressure filling and feed systems, dosing and mixing systems.

Mobile HydraulicsSingle and multistage high pressure gear pumps, hydraulic motors and valves for construction machinery, vehicle-mounted machines.

Flow MeasurementGear and turbine flow meters and electronics for volume and flow metering technology in hydraulics, processing and laquering technology.

Industrial Hydraulics /Test Bench ConstructionCetop directional control and proportional valves, hydraulic cylinders, pressure, quantity and stop valves for pipe and slab construction, hydraulic accessories for industrial hydraulics (mobile and stationary use).

Technology Test benches / Fluid Test benches.

Product Portfolio

Volumec 2/4 / Volutronic® 0.2 / GB/5.08

VOLUMEC - Hydraulics€¦ · VOLUMEC Indicator AVC 02 Function Together with the gear type volume...

Documents

Transcript of VOLUMEC - Hydraulics€¦ · VOLUMEC Indicator AVC 02 Function Together with the gear type volume...