Volume 2010
-
Upload
rockford-fosgate -
Category
Documents
-
view
225 -
download
5
description
Transcript of Volume 2010
VO
LUM
E MA
GA
ZINE ISSU
E 2.5
WW
W.R
OCKFO
RD
FOSG
ATE
.COM
Dear Rockford Fanatics,
It’s with great excitement that I present to you our 30th Anniversary Edition of Volume Magazine. Looking back over the last three decades, I am proud of our rich heritage and the brand, Rockford Fosgate.
Each of us at Rockford have been living the Fanatical audio lifestyle for many years. Our past has taught us many things; we have the best customers, we engineer and sell the best products and the Rockford team is second to none! These key ingredients will allow us to move into the future as a leader and innovator in this industry.
Our customers energize and sustain this brand. Rockford customers are different; they expect more and demand the absolute best. I travel all over the world and the message is consistent, “Your Brand is bad ass and you guys make the best stuff on the planet,” no higher compliment could be given. Rockford Fosgate products have been designed and engineered in Tempe, Arizona since the beginning. Our 30 year reputation is grounded in engineering and manufacturing the finest audio products in the world. Our no-compromise approach has yielded patented iconic products like the Punch EQ, Punch 45 amplifier and the 3Sixty integrated signal processor. Today, our new products push the performance envelope even further. Each new product is a step forward, they sound bigger, they play louder and run longer. Our commitment to YOU … we’ll never settle for “good enough.”
Our 2010 product line represents our core philosophy. Our new amplifiers, speakers and subwoofers have raised the bar on the competition. In addition, we are pleased to be entering the “personal audio” business. These products will allow you to take the Rockford Fosgate sound to new places!
Our 30 year history has been made possible by the passionate support of our customers. Without great customers, brands do not survive. Our commitment to you is to keep challenging ourselves and pushing this brand to higher and higher levels.
Every member of the Rockford team thanks you for your passionate and FANATICAL support!
Bill JacksonPresident
WE CALL IT ROCKFORD. While our engineers are passionate about what they design and create, we have a special product validation team that just focuses on ensuring every Rockford Fosgate product is nothing short of perfect. In fact we have an entire process of stringent practices that MUST take place before a woofer, amp or loudspeaker even gets shipped from our Tempe, Arizona facility. We use a FARO arm with laser scanner to ensure our speakers are PERFECTLY round, a “Boom Room” that torture tests our woofers to the point of failure and every amplifier that we ship is burned-in no less than twenty-four hours.
EXPECT MORE.Rockford Fosgate believes that you should get the most out of our products every time you power up or plug in.
Our loudspeaker engineers have developed proprietary technology that packs MORE CONE AREA into a standard size loudspeaker than ever before. VAST (Vertical Area Surround Technology) achieves up to 25% more cone than our previous generation loudspeakers & certainly more than our nearest competitor. Rockford’s philosophy is you deserve MORE!
Many manufactures place a power number on a box because at some point their amplifier managed to squeak out that power number. Rockford Fosgate takes a totally different approach as to how we rate our amps.
In actuality our amplifiers exceed our box rated power numbers in many cases by 20% or more. So what does that mean for you? If we rate an amplifier at 1000 watts we know it will do it and keep performing over and over again. Bottom line, there is NO BS here . . . In a sea of amplifiers claiming max this & rms that, when you buy a Rockford Fosgate amp you can have the confidence that it’s going to do EXACTLY what we said it will.
DESIGNED & ENGINEERED IN THE USA
24 HOUR TORTURE TEST
30 YEARS OF ROCKFORD INNOVATION
1973Jim Fosgate introduces PR7000 PowerPunch amplifier.
1980Rockford Fosgateis born.
1984Rockford produces the first 12 Volt amplifiers to use MOSFET transistors.
1985The Punch 45 MOSFET amplifier is born.
1987RTTI is launched.
1988Power 1000 MOSFET is born.
PVC Birth Certificate concept is launched.
1990Rockford introduces Hybrid Surface Mount technology.
1991Symmetry is born.
1996TransNOVA circuit topology debuts.
1997Patented Class D topology “BD” debuts.
2000Rockford Fosgate partners with Nissan.
2007Rockford introduces patented DTM circuit.
2009Rockford introduces Vertical Attach Surround Technique (VAST).
2010 Rockford introduces Constant Power.
7
13
17
27
21
VOLUME ROCKFORDFOSGATE.COM5
CONTENTS | ISSUE 2.0 2010 BUYER’S GUIDE
FEATURES
2 RF PRESIDENTLetter from RF Prez Bill Jackson
7 JOSH GRANTMotorcross Sensation #33
11 TEST & REVIEW3Sixty.2
13 DROPPING BEATSRockford Fanatic from Colombia
15 FANATIC FOR LIFEBleed Rockford Red
16 HOW TOChoose, Prepare and Connect a Proper Ground
17 WHAT’S YOUR VOLUME WINNERKarissa Hosek
20 HOW TOIdentifying a Harness Wires in a Factory Radio
21 MISTER CARTOONAuthentic, Hardcore & Passionate
27 BRAD FOWLERIn loving Memory
29 HOW TOBuild a High Output Subwoofer Enclosure
30 BLUEPRINT FOR BASSYour Guide to Building a Subwoofer Enclosure
ROCKFORDFOSGATE.COM
Introducing Courtney
53
ROCKFORD FOSGATE 2010 BUYER’S GUIDE 6
NEW FEATUREDownload http://gettag.mobi to your mobile phone and then take a photo to connect with online content.
67
BUYER’S GUIDE | PRODUCTS
33 PUNCH PLUGS & RF DJIn-Ear Monitors & 2 Way Loudspeakers
35 3SIXTYSeamless DSP-Processing
39 CUSTOM SHOPOne-of-A-Kind Amplifiers
41 CONSTANT POWERRevolutionary Technology
45 PUNCH AMPLIFIERSCheck Out the New Models
47 PRIME AMPLIFIERSCheck Out the New Models
51 POWER SUBWOOFERSTrue Music Reproduction & Power Handling
53 POWER T1 SUBWOOFER All New from the Ground Up
55 PUNCH SUBWOOFERSEnthusiast Favorite
62 PUNCH IBEAMNext Generation of High-Def Bass Solutions
64 PRIME POWERED LOADEDComplete Bass Solution
67 POWER T2 COMPONENTSAluminum Meets Power Series Loudspeakers
71 PRIME COMPONENTSNew R1652-S and R152
71 PUNCHWEAR 2010Looking Good has Never Been Easier
33
41
39
64
71
VOLUME ROCKFORDFOSGATE.COM7
While many of you might recognize Josh Grant in full motocross gear, what you might not know about this world class supercross/motocross rider is he’s a passionate Rockford Fosgate car audio enthusiast.
We caught up with him at his pad in So Cal for a little one-on-one about his world of fast dirt bikes, high flying jumps and of course his tricked out Rockford Fosgate system.
RF: So Josh, can you give us a little info as to who you are and what you do?JG: No problem, my name is Josh Grant, I’m a professional Supercross/Motocross Racer. Currently I race for the Muscle Milk/Toyota /Joe Gibbs Racing Team. I’m known for my competitiveness, big whips and west coast style.RF: Looks like you’ve got yourself some serious trophies, what are some of your career highlights so far?
ROCKFORD FOSGATE 2010 BUYER’S GUIDE 8
(4) P3 15” SUBWOOFERS
VOLUME ROCKFORDFOSGATE.COM99 VOLUME ROCKFORDFOSGATE.COM
JG: My dad got me on a bike when I was old enough to get my leg over
the seat; I’ve basically grown up on a dirt bike. You know you’ll never
forget your first time… so I guess my first win at Anaheim 1 this past
January has to be the one that sticks out the most for me. I have also
won two outdoor MX events at Mt. Morris in 2006 and this past year
at Red Bud on July 4th as well as winning the 2006 SX Lites race in
Atlanta that had the largest crowd to ever witness a SX race. Big props
to my team if it wasn’t for them it would be impossible to make the
podium.
RF: Josh – you’ve got a seriously impressive Rockford system here.
Can you tell me a bit about it?
JG: Well, 2 months and $30k later I have a bad-ass system! It was well
worth the wait. It has four Rockford 15’s in a custom tuned box and
is backed up by the top-of-the line Power Series amps. Power series
components in all the doors, 3Sixty tuning, Kinetik batteries, you know
the works.
RF: How’d you get into car audio?
JG: I’ve always wanted a bumpin’ system, like I said music is a big
part of my day and how I get pumped up for race day. Working with
you guys at Rockford gave me the opportunity to design exactly what
I wanted in a system, lots of bass – that custom look and of course be
able to give a little “what’s up” to the car next to me.
RF: What type of tracks are you bumping in this ride?
JG: My favorite artist is Lil Wayne, but I like all sorts of music. Really
just depends on the mood I’m in and sometimes what my crew wants
to listen to. I can promise you one thing, whatever I’m playing it’s
banging!
RF: So Josh if you could say one thing to those aspiring “car audio
enthusiasts” that are going to read this year’s Volume magazine what
would it be.JG: Keep it real, go big and find your unique style. That’s how I’ve
made my career in racing and that’s how I live it every day.
T1 C
om
po
nent
s
ROCKFORD FOSGATE 2010 BUYER’S GUIDE 10
VOLUME ROCKFORDFOSGATE.COM11
Rockford Fosgate’s new interactive processor is more than
an OEM interface. With six channels, a 31-band EQ for each
channel, very flexible crossover control with adjustable levels
for each channel, remote subwoofer level control, auxiliary
inputs with their own 31-band EQ, signal delay and complete
control by a wireless Bluetooth interface, it would also be right
at home in a full-on aftermarket system as a powerful signal
processor. Tweaks and audio nuts will love the control and
flexibility the unit offers.
The 3Sixty.2 itself is a relatively diminutive piece of gear,
measuring about 7.25” by 4.25” by about 1.75” tall. It comes
with a wired remote control knob and setup CD. The heavy-
gauge sheet metal case has plastic end panels and a small
plastic window that changes color depending on what you
are doing. It looks solidly constructed and is finished in a
gloss gray color powder-coat. There are gain pots and blue/
red LEDs on the input panel to serve as signal and clip
indicators, making adjustments easy while eliminating the
need for voltmeters.
A quick read through the owner’s manual told me that
to use the product I would have to install the included
software onto my Bluetooth
capable device. This was a
surprise, but with Palm and laptop devices becoming
very affordable, and common, I soon understood the
logic behind the design.
I installed the software to my trusty old Tungsten
T2 with no problem and proceeded to hook the
hardware up on my test bench. The wiring is very
straightforward; the 3Sixty.2 will accept either
high-level BTL outputs (Bridged Tied Load, i.e.,
standard speaker-level outputs) from an OEM radio
or amplifier, or RCA inputs from an aftermarket
style source unit. In both cases, there are six inputs:
for left and right, front and rear, as well as center
and subwoofer channels. There is also a pair of
AUX input RCAs for the connection of an additional
audio source. The outputs of the 3Sixty.2 use the
same 6-channel configuration and are RCA-style
connections.
The wired remote plugs into a “Comm Port” and
uses a common RJ45-style connector. The remote
serves two functions: In one mode it acts as a remote
subwoofer level control and in the second mode,
it becomes a volume control for the device that is
connected to the AUX input. Clever, and cool.
If you have an OEM radio, you use the “OEM” setup;
if you have an aftermarket system and will use the
3Sixty.2 for processing only, you enter “New Setup.”
Since most of the processing is the same after an
OEM setup, I’ll describe that functionality. To simulate
an installation in an OEM-radio-equipped vehicle, I
used one of the OEM radios lying around my lab and
measured the frequency response. As you can see
by the blue line on the graph, it shows how much
EQ is “built in” to the OEM equipment.
When you enter the OEM setup, the screen
changes and explains that the setup procedure
will calibrate your unit to the OEM system. It
then instructs you to insert the included setup
CD into the car’s source unit, play track one, set
the volume to the maximum undistorted setting and
make sure the balance, fader and tone controls are
ROCKFORD FOSGATE 2010 BUYER’S GUIDE 12
set to center and zero respectively. Each screen is much
like a Windows prompt, with a “Back” and “Next” button.
As you complete the easy to follow steps, the 3Sixty.2 will
prompt you to proceed. It then instructs you to go to track
two and asks if you would like it to sum any channels that
it finds that are not full range. This ability to automatically
sum channels is one of the things that make the 3Sixty
different from most of the other interfaces on the market.
With the controls on the radio set as instructed, you are
prompted to adjust the gain controls until the red clip
LED barely illuminates, or just flashes red. A blue LED
indicates the presence of signal.
The unit asks you which channels are connected and
begins an examination of the audio on each of the input
channels (when using an aftermarket source unit; OEM
integration automates the entire process), determining
the frequency response and, if requested, the channels
to sum together for a full range signal. Then it can, if
you choose, automatically re-equalize in reference to
the OEM radio in an attempt to flatten any built-in EQ
curve as much as possible. When complete, it shows
you a graphical representation of the “before” and
“after” response curves on the screen. I found this
step to take several minutes.
The “Tuning” screen allows a wide range of control
and functionality to be accessed, and you can do
it wirelessly from the driver’s seat! I would have
given my eyeteeth for this kind of tuning capability
back in my car audio competition days. You can
tune each channel individually or as a stereo
pair. You can choose to mute any or all channels
individually to assist in tuning. You can also
adjust the overall level of each of the six channels
individually or as stereo pairs.
The list of signal processing features is extensive
and shows someone understood what kind of
control and flexibility is needed to tune a vehicle.
The “Tune System” mode includes controls
for the following adjustments:*Crossover
settings, Highpass/Lowpass/Bandpass or All
Pass, from 50Hz to 10kHz at -12 or -24dB/
octave slopes (individual channels or linked
stereo pairs)*Output level controls for each
channel that can also be linked in pairs*31-
band EQ for front L & R and 27-band EQ
for rear L & R & center, with +/-10dB of
adjustment*Separate 10-band EQ for the
subwoofer output*Infrasonic filter for the
subwoofer output*Delay for each full range channel, marked in
distance increments for easier soundstage tuning, to a maximum
delay of 5’.
With all the adjustments possible, the 3Sixty.2 makes fine tuning
your car simple and easy. Files with particular settings may be
saved, or even shared with others via the Internet. You can make
individual sound quality files for different types of listening material
or for different soundstage effects in your vehicle.
I think the Rockford Fosgate 3Sixty.2 Interactive Signal Processor
is one of those products that will be a trendsetter. The name hints
at its multi-use functionality, but as I discovered, it couldn’t begin
to describe the power and flexibility the 3Sixty.2 offers.
VOLUME ROCKFORDFOSGATE.COM13
DROPPING BEATS IN LATIN
AMERIC
A
ROCKFORD FOSGATE 2010 BUYER’S GUIDE 14
LATIN AMERICA is a hot bed of ROCKFORD FOSGATE Fanatics. The unique Latin culture breeds passionate enthusiasts with an eye for design and craving for authentic Rockford Fosgate sound.
From high in the Colombian Andes Mountains, JOSE MIGUEL TORRES embodies the characteristics of a pure Rockford Fosgate fanatic. A member of TEAM JMT PERFORMANCE, Jose has been passionate about high-performance car audio since 1994.
Galois Mendoza, owner of a Chevrolet Captiva 2008, recruited Jose Miguel to build the ultimate audio demo vehicle. Galois wanted a vehicle that could be both a daily driver and be used as a showpiece with complete DJ console. Mendoza flipped Jose the keys and FULL creative control, not to mention an open check book. The result is a vehicle that combines the passion of both of these fanatics for Rockford Fosgate products with the unique capabilities of a mobile DJ platform.
So what gear did Jose use to bring this rolling audio experience to life? This 5.1 system is all Rockford, 3Sixty.2 DSP processor, (1) T2500-1bd Power amplifier for the Subs, (2) T600-4 for front and rear channels, (1) T400-2 for the center channel, (4) T115D2 subwoofers, (16) T162s Power component sets for front and rear channels and (4) T152s as center channels. Not one to miss out on the “audio jewelry” all RCA, power cables, fuse holders and battery clamps are of course Rockford Fosgate.
Jose and crew at JMT Performance is already working on his next project, a 2010 Chevrolet Tahoe. We anxiously await its unveiling at the Colombia finals November 2010 in Bogota.
Galois MendozaColombia
DROPPING BEATS IN LATIN
AMERIC
A
VOLUME ROCKFORDFOSGATE.COM15
ROCKFORD FOSGATE 2010 BUYER’S GUIDE 16
HOWTOCHOOSE/PREPARE/CONNECT A PROPER GROUND
Tools/Products Needed: Rockford Fosgate AWG Wire, Rockford crimp ring terminal(i.e. RFTS1), Non-Anodized bolt w/ compatible fender washers, lock washer with nut, sandpaper or alternative tool to remove paint from the metal surface.
• Poorly crimped• Metal surface has only been sanded down to the primer and not to bare metal• A screw is not the preferred mounting method
• Poorly crimped and stray wire strands• Metal surface area is improperly prepped• Regardless of how many you use, drywall screws do not work
• Really?
Tip: It is recommended to ground the source unit at the same location as your amplifier/s and other audio equipment to eliminate any possible ground loops. This is typically the first step in trouble shooting engine noise.
The prior “big three” HOW TO article (see youtube.com) outlined the upgrade of your vehicle’s main current carrying wires. That upgrade combined with this HOW TO article on proper grounding techniques will reduce noise, ensure the best possible current flow, and maximize the performance of your Rockford Fosgate audio system.
Begin by preparing the grounding cable. Strip 5/8” of insulation from the end of the wire, then securely crimp the compatible size ring terminal to the end.
Prepare the chassis ground by scraping ALL paint/primer from the metal surface and thoroughly clean the area of any dirt and grease. Be sure to have adequate surface area for the entire ring terminal to make contact to bare metal.
Location: The majority of vehicles on the road are a combination of metals, spot welds, glued together unibody panels and isolated chassis components. So choose a location that consists of a substantial mass of solid metal.
Contrary to popular belief factory bolts are NOT a good ground location (i.e. seat bolt). The majority of factory bolts attach to a nut that is typically tack welded in place and are designed to hold something in place. This method DOES NOT provide ample current transfer.
Complete your ground by securing the ground cable to the chassis ground. Bolting the ground ensures you will have maximum contact.
A proper ground is: • Clean of residue and paint • Equal ground wire gauge as compared to the power wire gauge • Has a resistance return of 00.5 Ω or less • SECURE!
You can verify the quality of the ground by checking the resistance in ohms using a digital multi meter (DMM). Set your DMM to Ω, then place one probe on the ground you have created and the other on the factory battery ground. Remember resistance cannot be measured accurately on a live circuit.
BAD
BAD
GOOD
BAD
1 2 3
Search:Rockford Fosgate RTTI
VOLUME ROCKFORDFOSGATE.COM17
W hen we launched the What’s Your Volume contest this past year, we had no idea who or what type of videos we’d get. With our fingers crossed we carefully uploaded our YouTube.com
introductory video, and the What’s Your Volume Contest was born. As the entries started to roll in, we took special note of a confident young woman talking about a Rockford Fosgate system in an RX-7. At first we said, “Is this girl for real?” but after thousands of votes, Karissa Hosek, from Victoria, TX not only captured the $5000 sponsorship and secured her spot in VOLUME magazine, but impressed the world with her dedication to performance car audio and the Rockford Fosgate brand.
Rockford Fosgate is nothing new to Karissa. “I’ve grown up with Rockford Fosgate,” smiles Karissa as she starts to show us her latest retro-fit with all of her new Rockford Fosgate gear.
Karissa Hosek
What's YourVolume Winner
ROCKFORD FOSGATE 2010 BUYER’S GUIDE 18
Karissa is part of a long line of car audio enthusiasts and installers, third generation to be exact. Hi-Pro Audio was started by her Uncle David Rother and carried on in his memory by her grandfather, who continued the business in Victoria, TX. Today Hi-Pro is managed by her father Henry and she works side-by-side with her older brother Justin.
“I’ve been working at Hi-Pro since I was born, but have been selling and installing for about four years now,” explains Karissa.
“I wanted my RX-7 not only to be loud, but look razor sharp. We used an extensive amount of carbon fiber on the box so it would match my carbon fiber hood,” Karissa points out. “The interior of the RX-7 is pretty tight so we had to get creative on how we mounted all of the audio gear. We’ve got components in every nook and cranny, 3Sixty.2 in storage panels, a Rockford 10F cap in the other, and we even stashed a T400-2 & Rockford 10F cap in a trim panel complete with cooling vents and custom mounts.”
So what new equipment did Karissa spec out with her Rockford Fosgate sponsorship? Up front she chose the new T2 6.5” components (T2652-S) and a pair of the new T1 6.5” coax (T1652). Powering up the highs is a T400-2. While Karissa’s RX-7 interior is tight, she’s one power hungry fanatic so why not power each of the PUNCH P3 12” woofers with their own T500-1bdCP! These woofers get it done, especially reflecting off the glass of the Mazda’s hatch. Karissa’s wish list also included a pair of T112D4 woofers. (While not available at the time of this photo shoot, Karissa’s RX-7 update plan includes two T112D4 to add even more PUNCH to her ride.) System tuning is handled by Rockford’s 3Sixty.2 and of course Karissa used all Rockford spec cable and accessories to complete the custom installation.
What does the future hold for Karissa? “I really enjoy photography and have a passion for cars; I’d like to focus these into a career as an automotive photographer.” Karissa is extremely talented and creative; we saw this in everything she showed us while visiting with her on-location in Texas.
Our time with Karissa at her shop in Victoria, TX was one of the most authentic Rockford Fosgate fanatic experiences to date. We look forward to seeing more audio installations from Karissa and want to officially congratulate her on wining the What’s Your Volume Contest!
+500hp
glove box
cargo boxKarissa’s 2007 Senior Photo
Miss Hosek is hands on. Spend just a few
minutes with this Rockford Fosgate Fanatic
and you’ll know she’s the real deal.
Photo courtesy of L-Ann Imaging
+500hp
VOLUME ROCKFORDFOSGATE.COM19
Aftermarket* OEMYellow
RedBlack
GrayGray w/ Black Stripe
WhiteWhite w/ Black Stripe
PurplePurple w/ Black Stripe
GreenGreen w/ Black Stripe
12V Constant (battery)
12V Switched (ignition)
Ground
Front Right (+)Front Right ( )Front Left (+)Front Left ( ) Rear Right (+)Rear Right ( )Rear Left (+)Rear Left ( )
Speakers
ROCKFORD FOSGATE 2010 BUYER’S GUIDE 20
HOWTOIDENTIFYING HARNESS WIRES IN A FACTORY RADIO
Tools Needed: Multimeter, Test Lead Kit, Tone/Pulse Generator, Polarity Tester
Tip: Some vehicles come equipped with a factory installed amplifier. In this case the same wire identifying procedures can be used at the amplifier’s wiring harness as well.
*Aftermarket wire colors are typical.
Note your findings in the OEM column below
Identifying the wires in a factory radio harness is an important part for proper installation of any of the Rockford Fosgate 3Sixty OEM integration products, whether it is power/signal for a signal processor (3Sixty.1/3Sixty.2), line driver (RF-BLD) or power for the iPod charger in one of the Rockford Fosgate integration for iPod products. Following this tutorial will ensure correct wire identification.
Begin by removing the factory installed radio. Vehicle specific how-to information can commonly be found on 12volt/car audio forums and vehicle specific forums. (i.e. www.the12volt.com, www.vwvortex.com)
12V Constant (battery): First, verify the vehicle ignition switch is in the OFF position. Then you will need to change the setting on the multimeter to direct current(DC) voltage(V). Now place the common probe (typically black) from the multimeter to a vehicle ground. *We used alligator clips to hold the common probe to ground. This leaves a hand free to manipulate the harness. Your setup is now complete. Continue by testing each wire in the harness with the multimeter’s positive probe (typically red), noting your findings. *Typically you will only find one wire that reads 12.00VDC on the meter.
12V Switched (ignition): Maintain your multimeter settings from the previous step, DC Voltage and common probe to ground. However, you will now need to change the vehicle ignition switch to the accessory (ACC) position. Proceed by testing each wire in the harness with the positive probe, noting your findings. *Typically you will only find one wire that reads 12.00VDC on the meter with the vehicle ignition in the accessory and run positions, besides the wire you noted above.
Ground: Start by turning the vehicle ignition switch back to the OFF position. You will also need to change the setting on the multimeter to continuity, leaving the common probe connected to the vehicle probe as described in the previous test. Now test each wire in the harness with the positive probe, noting your findings. *The multimeter will typically indicate continuity with an audible tone. Some illumination/dimmer wires can read ground; this can be verified by turning on the headlights which will break the ground.
Speakers: Begin by verifying the vehicle ignition is still in the OFF position. You can now disconnect the multimeter’s common probe from ground. Continue by changing the setting on the multimeter to impedance(Ω). Now place the common probe on one of the harness wires, and then test each of the remaining wires with the positive probes, noting your findings. Repeat this test by moving the common probe until all combinations have been tested. *Impedance readings on original equipment manufacturer(OEM) speakers can read from 01.0-08.0Ω; however a typical reading is 04.0Ω.
4 5
6
Search:Rockford Fosgate RTTI
Polarity: Once you have located your speaker wire pairs you will still need to determine the correct polarity of each set. This can easily and safely be done by using a tone/pulse generator coupled with a polarity tester. *If these additional tools are not available to you, this can also be done with a 9V battery and visually identifying what direction the cone travels. If the speaker’s polarity is correct it will move outwards. CAUTION: Using this method can damage the speakers or if the battery current is connected to incorrect harness wires, this can result in damage to other vehicle components.
1 2 3
VOLUME ROCKFORDFOSGATE.COM21
ROCKFORD FOSGATE 2010 BUYER’S GUIDE 22
A uthentic, hard core and passionate the traits that embody a true
Rockford Fanatic. Born and raised in the city of Angles, Mister Cartoon is best known for
his intricate art that has been inscribed on the bodies of Eminem, 50 Cent, Dr. Dre, Cypress Hill,
Beyonce, Justin Timberlake and Kayne West just to name a few. Having earned his nickname through his
drawing abilities and personality, Mr. Cartoon was introduced to design through his rudimentary career as a
graffiti artist in the 80’s. What many people don’t know about this worldwide tattoo artist is his passion for
custom vehicles and Rockford Fosgate audio. Mister Cartoon welcomed the Rockford crew to his Los Angeles compound for an exclusive look at his
private tattoo studio, art studio and exclusive collection of custom restored vehicles.
A close member of the Rockford Fosgate family, Mister Cartoon has taken his gift of art and applied it to his
roots. “I started going to car shows when I was 16, I made a decision then that I wanted
VOLUME ROCKFORDFOSGATE.COM23
to do murals on low riders so around 19 years old I started painting
low riders. It wasn’t until over the last 5 years that I have had a shop
open, that builds cars from the frame up. I think the competition keeps
me passionate and seeing something manifest from just a thought
drives me even more,” explains Mister Cartoon.
Mister Cartoon’s personal vehicles embody many influences and
range from full custom low riders to a rolling audio lab on wheels
appropriately named, The Ice Cream Truck.
“I like Rockford Fosgate they make dependable amps and woofers, I
run my systems hard and I love a company that backs their product
up. Rockford Fosgate is focused on quality and dependability and
that’s what keeps me running Rockford,” smiles Mister Cartoon.
His blend of old school graffiti, fine line tattooing and street culture
can be seen in everything Mister Cartoon does. A real success story
from skid row, Mister Cartoon offers this advice to his fellow Rockford
enthusiasts. “Be creative with your trunk space and integrate kick
panels. Draw the systems out prior to building and just be creative
with your thoughts and execution.
ROCKFORD FOSGATE 2010 BUYER’S GUIDE 24
“ Be creative with your trunk space, draw the systems out prior to building and just be creative with your thoughts and execution” Mister Cartoon
VOLUME ROCKFORDFOSGATE.COM25
Once in a lifetime a story about a Rockford Fanatic not only stirs passion for the audio lifestyle but has the ability to inspire the lives of so
many people. Without question the story of this award winning 2007 Cadillac Escalade is it. The vision of Brad Fowler, this is more than just another custom truck but a celebration of life, a passion for cars and love for audio. Tragically, Brad was unable to see his vision become a reality, his vibrant and giving life cut short. It was decided by the family to finish the Escalade and Jessica, Brad’s sister would complete Brad’s dream of putting it in the Ocean City, MD car/truck show in June 2008.
The Fowler family gave us unrestricted access to Brad’s dream vehicle and the opportunity to share Brad’s story with the world.
Brad started the project in early 2007. Low & slow, Brad’s vision took over five months just to plan before he found just the right mix of components and a custom fabricator for his Escalade project.
“His dream was to have the best show car in Calvert County, Brad knew exactly what he wanted, which was the loudest audio system, lots of TVs, video, airbags and custom rims,” says his Mom, Brenda.
A Rockford Fanatic, Brad knew the only equipment for his dream truck was Rockford Fosgate.
ROCKFORD FOSGATE 2010 BUYER’S GUIDE 26
In Memory of
Brad Fowler
VOLUME ROCKFORDFOSGATE.COM27
This custom Escalade is full tilt Rockford. Filling the custom tuned rear box are eight P3D212 Punch Subs, powered by six T1000-1bd Power Amplifiers. All four doors carry two sets of T162-S Power components each, with another set of T162-S Power components placed in the center console as well as rear mounted set in the cargo hatch. The mids and highs are driven by two T600-4 Power amplifiers. To keep things balanced and tuned a Rockford Fosgate 3Sixty signal processor is employed, the DSP adding realism to the XBOX360, Playstation 3 & ten video monitors.
“When Brad would get something new he’d tweak, fine tune & play – spending hours on every detail in the garage. He was extremely passionate about audio & video,” laughs Duce, Brad’s friend.
An avid Dallas Cowboys fan, Brad turned to the Texas based guys at Ekstensive Metalworks, featured in Volume 1.0, to do the highly detailed fabrication to turn the Escalade into a serious show truck. Ekstensive fitted custom upper and lower control arms, firestone airbags, notched the firewall, fender wells and floorboards. Even the factory fuel tank was replaced with a custom fuel cell to accommodate the extreme drop. “The complete build took over a year to complete and became a very personal build for us because of the circumstances,” says Mitch Ralls of Ekstensive Metalworks.
While Brad never got to see his creation finished his compassion to others was evident as those involved with the project focused in on the one event Brad dreamed of attending with his custom Escalade. “Thoughtfulness and generosity is what made Brad so special. He didn’t have just one best friend, all his friends
Brad FowlerLusby, MD1986-2008
ROCKFORD FOSGATE 2010 BUYER’S GUIDE 28
Best Frien
d Duce
Over 10,000 Watts
were best friends,” smiles Brenda, Brad’s Mom. Brad’s passion for vehicles, football and Rockford Fosgate audio translated into everything and everyone he interacted with.
Jessica, along with Brad’s friends, worked with Ektensive to get the Escalade done just like Brad wanted. The Texans with Ektensive personally delivered the truck to the Fowler residence.
“It was a very emotional day to watch the Escalade being unloaded from the trailer,” remembers Brenda Fowler.
Brad’s 2007 custom Escalade did make the grade at the Ocean City Car & Truck Show in Maryland in 2008. In fact it took the coveted Mayor’s Award at this show. Since then his sister, Jessica and friend Duce have won every show they’ve entered with Brad’s Escalade.
With a smooth beat, a gentle drop of the suspension, we honor Brad Fowler, Rockford Fanatic, and know his legacy will live on forever.
VOLUME ROCKFORDFOSGATE.COM29
HOWTOBUILD A HIGH-OUTPUTSUBWOOFER ENCLOSURE
Supplies: Medium Density Fiberboard (MDF)Wood Glue, Box Carpet, Contact Adhesive, Nails or Screws
Build the port first. The end of the port should be rounded over on both sides to reduce air turbulence. Use wood glue and nails to attach the 2 parts of the port together. Paint the inside of the port for that clean look.
Dry fit the parts of the enclosure first before applying glue or nails. Label your parts so you know where they go. (e.g. baffle, top, sides, port, etc.) Apply wood glue to all the joints and secure them with nails or screws.
Find the location in the center of the baffle where the woofer will be mounted. Mark this location and drill a 1/8 inch hole. Use the RTTI woofer hole cutting jig to cut the exact hole for the woofer. Use a router with a flush trim bit to cut the opening for the port.
Apply the contact adhesive on the enclosure and the box carpet. Allow the adhesive to dry for 2-3 minutes before adhering the box and carpet together. Trim off the excess carpet, and cut out the openings for the woofer and port.
Here is the completed enclosure wired with 12 gauge Rockford Fosgate speaker wire. Check out rockfordfosgate.com/rftech for the Woofer BoxWizard, Woofer BoxAdvisor, WiringWizard, and other cool tech stuff.
Tools Needed: Table Saw, Drill, Router, Nail Gun, Measuring Tape, Calculator
A high-output subwoofer enclosure is an enclosure design with a built-in slot style port that is calculated for maximum bass. These examples have been designed by the experts at RTTI using the latest enclosure design software. They are then built and tested in many different vehicles to ensure maximum performance in all applications.
Search:Rockford Fosgate RTTI
Select the size and type of subwoofer. The actual dimensions for the enclosure can be modified as long as the internal volume and port are equal to the RTTI specified enclosure.
Use a table saw to cut the enclosure parts to the desired sizes. Be sure to leave the safety features of your power tools in place. Measure twice and cut once.
4 5 6
7 8
1 2 3
ROCKFORD FOSGATE 2010 BUYER’S GUIDE 30RTTI Tech Tips: For added rigidity, use 1” MDF for the front panel/baffle on all enclosures. Use a subsonic filter for added reliability.
Box Volume[NET]: 2.8 cu. ft.Box Volume[GROSS]: 3.6 cu. ft.Port: 2.5” x16.5” x 24.5”Tuning: 37 Hz
Cut List:Baffle/Back: 27.5” x 18”Top/Bottom: 27.5” x 14.5”Ends: 14.5” x 16.5”Port: 8.5” x 16.5” - 12” x16.5”
Box Volume[NET]: 3.25 cu. ft.Box Volume[GROSS]: 4.22 cu. ft.Port: 3” x16.5” x 22.5”Tuning: 38 Hz
Cut List:Baffle/Back: 30” x 18”Top/Bottom: 30” x 15.5”Ends: 15.5” x 16.5”Port: 8.5” x 16.5” - 12.5” x16.5”
Box Volume[NET]: 2.1 cu. ft.Box Volume[GROSS]: 2.7 cu. ft.Port: 2.5” x12.5” x 24”Tuning: 37 Hz
Cut List:Baffle/Back: 27.25” x 14”Top/Bottom: 27.25” x 14.5”Ends: 12.5” x 14.5”Port: 12.5” x 12” - 12.5” x8”
P3/P2/P1 12” SUBWOOFER
P3/P2/P1 15” SUBWOOFER
P3/P2/P1 10” SUBWOOFERT1 10” SUBWOOFER
T2/T1 12” SUBWOOFER
T2 15” SUBWOOFER
Box Volume[NET]: 2.25 cu. ft.Box Volume[GROSS]: 3.12 cu. ft.Port: 3” x13.75” x 25.75”Tuning: 40 Hz
Cut List:Baffle/Back: 30” x 15.25”Top/Bottom: 30” x 13.75”Ends: 13.75” x 13.75”Port: 13.75” x 13.5” - 13.75” x10.75”
3/4” MDF
13.5” 26”
2” 9.31”
2”
13.5”
13.5”
14.75”
3/4” MDF
14” 29.25”
2” 9.25”
2”
12”
14”
6.25”
3/4” MDF
14.25”
15.25”
30”
3”
15.25”
15.25”3” 10.81”
3/4” MDF
8.75”
16”
27.25”
2.5”
16”
14”2.5” 11.25”
3/4” MDF
9.25” 3”
17”
18”
30”17”
3” 13.81”
3/4” MDF
9.25” 2.5”
16”
18”
27.5”16”
2.5” 13.875”
Box Volume[NET]: 1.75 cu. ft.Box Volume[GROSS]: 2.1 cu. ft.Port: 2” x10.5” x 19.5”Tuning: 37 Hz
Cut List:Baffle/Back: 29.25” x 12”Top/Bottom: 29.25” x 12.5”Ends: 12.5” x 10.5”Port: 10.5” x 10.5” - 10.5” x5.5”
Box Volume[NET]: 1.5 cu. ft.Box Volume[GROSS]: 2.04 cu. ft.Port: 2” x12” x 25.5”Tuning: 38 Hz
Cut List:Baffle/Back: 26” x 13.5”Top/Bottom: 26” x 12”Ends: 12” x 12”Port: 14” x 12” - 10” x12”
BLUEPRINTS FOR BASSCUSTOM RF ENCLOSURE DESIGNS
VOLUME ROCKFORDFOSGATE.COM31
Custom Shop Power AmplifiersPower AmplifiersPower T1 SubwoofersPower T2 ComponentsPower T2 SubwoofersPunch Amplifiers
RFDJPunch PlugsPrime AmplifiersPrime CoaxialPrime ComponentsPrime Powered Loaded
ROCKFORD FOSGATE 2010 BUYER’S GUIDE 32
*Please refer to “iPod Compatibility” chart under www.rockfordfosgate.com/products for complete listing of iPod/iPhone models.
NEW
VOLUME ROCKFORDFOSGATE.COM33
BIGGER IS BETTERCLASS LEADING 15mm DYNAMIC DRIVER delivers massive bass response, ultra accurate mid range and crystal clear highs.
GET LOUDPUNCH PLUGS massive 15mm driver with a low impedance design and PUNCH EQ tuning, combine for an industry leading SPL (Sound Pressure Level). When too much is just right.
DESIGNED FOR COMFORTIncludes mulitiple COMFORT PLUGS to ensure a custom fit for every ear. Superior noise attenuation keeps the PUNCH IN and the World OUT. Finally you can get loud, without fear of disturbing the peace.
PROPRIETARY TANGLE FREE FLAT CABLE DESIGN• Low friction jacket reduces mechanical noise • Integrated y-splitter with length adjustment• 3.5mm low profile ergonomic connection
INTEGRATED MICROPHONE AND REMOTE (PP15MMI ONLY)• Adjust volume by pressing the + and – buttons• Control music and video playback• Answer and end phone calls• See website for compatibility to your iPod or iPhone
Rockford Fosgate is not your ordinary audio manufacturer, PUNCH PLUGS are not your ordinary in-ear monitor.We’ve changed the rules when it comes to your personal space and approached the earplug in a whole new way. In the last thirty years we’ve learned a few things about making serious bass, in fact our PUNCH sonic signature has defined car audio. Rockford engineers have captured the POWER, the CLARITY and GROUND SHAKING BASS found in our class leading subs and found a way to put it directly in your ear.
PLUG IN. PUNCH OUT.
™
I N - E A R M O N I T O R S
PP15MM 15mm NEODYMIUM 105dB/mW 10Hz - 18kHz 3.5mm NO
PP15MMI 15mm NEODYMIUM 150dB/mW 10Hz - 18kHz 3.5mm YES
Driver Size
DriverMaganet
InputSensitivity
FrequencyResponse
PlugSize
Remote/Mic
NEW
2 - W A Y L O U D S P E A K E R S
HIGH OUTPUT ENCLOSURE• Bass reflex design• Large volume for better low frequency response• Integrated ergonomically designed handles• Industrial grade carpet• Interlocking corners allow stacking of multiple cabinets• Dual input o 5-way binding post o ¼” phono jack• Heavy gauge steel mesh grille• Industry standard 1 3/8” pole socket
JAM. SPIN. PARTY.You’ve been mixing tracks with Rockford in your ride for years. Now you can bring that same beat to your home, club or party with the ALL NEW RFDJ1 2-way loudspeaker system. Huge power handling and 12” woofer combine for brutal raw output. Rugged design sets you up for the inevitable party foul. For the DJ in all of us, a must for the Rockford fanatic.
12” 2-WAY PASSIVE SPEAKER• Frequency response from 33Hz-22kHz• RMS Power 150 watts/Peak Power 300 watts• Sensitivity 92 dB• Nominal impedance - 4 ohms• High efficiency, low distortion design provides high
audio output with minimal power requirements
HORN LOADED COMPRESSION DRIVER • 1” titanium diaphragm tweeter• Better off axis response and midrange vocal clarity• Overload protection circuitry• Field replaceable
*Please refer to “iPod Compatibility” chart under www.rockfordfosgate.com/products for complete listing of iPod/iPhone models.
NEW
ROCKFORD FOSGATE 2010 BUYER’S GUIDE 34
PP15MM 15mm NEODYMIUM 105dB/mW 10Hz - 18kHz 3.5mm NO
PP15MMI 15mm NEODYMIUM 150dB/mW 10Hz - 18kHz 3.5mm YES
VOLUME ROCKFORDFOSGATE.COM35
FULLY INTERACTIVE CONTROL VIA BLUETOOTH ENABLED DEVICE• Controlled via laptop or PDA• Tune from the front seat of your vehicle wirelessly• Real time adjustment (Hear the changes as you make them)
AUX INPUT WITH 31 BAND EQ• Allows the connection of iPod/Sat radio/ MP3 player (via RCA)
IMPROVE THE SOUND OF YOUR OEM OR AFTERMARKET SOURCE UNIT• 6 Channel 1/3 octave equalizer• 31 Band EQ, left and right front• 27 Band EQ, left and right rear• 27 Band EQ, center• 10 Band EQ, subwoofer
SAVABLE FILES• Allows user to load files for different listening preferences• Allows dealer to load custom files to any 3Sixty equipped vehicle
X-OVER• 12/24 dB HP/LP/BP/AP per octave crossover• Increased speaker power handling coupled with a broader
frequency range• Allows for superior integration between high pass and low pass
speakers
MASTER VOLUME/SUBWOOFER LEVEL CONTROL• Front seat control for song to song manipulation
BALANCED LINE DRIVER (RF-BLD)• Eliminates system noise• Accepts High-level/RCA level inputs• Up to 24dB of signal gain
TURNS YOUR FACTORY RADIO INTO A HIGH PERFORMANCE SOURCE UNIT• Auto Equalization corrects prior factory
equalization settings• Auto summing creates a full range audio signal
• Retain your factory steering wheel, navigation and phone controls
3SixtyBLDIntegrate to a factory head unit or add some juice to a low-voltage aftermarket unit, the 3Sixty Balanced Line Driver (BLD) will get your signal across. Featuring ‘Balanced Differential’ or ‘Single Ended’ mode, its high voltage output combined with a low output impedance will drive large arrays of amplifiers without breaking a sweat.
RF-BLD
3SIXTY.2
ROCKFORD FOSGATE 2010 BUYER’S GUIDE 36
SEAMLESS INTERGRATION MEETS DSP PROCESSINGYou just invested in the latest factory navigation unit, the last thing you want to do is have to replace it to build a killer system. Don’t worry, Rockford Fosgates 3Sixty is the ultimate tool to integrate your factory head-unit and give you the control to incorporate multiple amps, sub-solutions and speakers. Looking for the most state of the art tuning device on the market? 3Sixty not only acts as the bridge from factory to performance, but also includes SERIOUS tuning capability. The 3Sixty computer based GUI (Graphic User Interface) is easy to use if your just getting into performance audio or are a seasoned pro.
“ I’m running a massive amount of equipment in my Tahoe. Rockford’s 3Sixty processor gives me the control and tools I need to run my system.”Steve Meade 2006 Chevy Tahoe
PUSH THE ENVELOPE.2010 POWER amplifiers are the culmination of 30 years of pushing the envelope in amplifier technology. These amplifiers deliver unprecedented power & control in the hands of the most discriminating audio fanatic.
THE STANDARD.Rockford Fosgate’s PUNCH has revolutionized the industry. PUNCH amps combine Rockford’s heritage with the latest technology in a compact package. When you’re ready to haul the mail, PUNCH amps will get the job done.
THROW DOWN.Breaking new ground in both performance and value, PRIME amplifiers take advantage of Rockford technologies at a level that everyone can attain.
REAL PAINT
REAL UNIQUE REAL ARTISTs
VOLUME ROCKFORDFOSGATE.COM39
ROCKFORD FOSGATE 2010 BUYER’S GUIDE 40
T600-4 | T1500-1bdCP Engine Turn - Matte Black Finish
T600
-4 |
T15
00-1
bdCP
Dre
amSc
ape*
T600-4 | T1500-1bdCP Widow Maker
*Arti
st in
terp
reta
tion,
no
two
amps
alik
e
T600-4 | T1500-1bdCP Candy T600-4 | T1500-1bdCP Flame
STAND APART FROM THE CROWDRockford Fosgate’s Custom Shop will be producing one-of-a kind amplifiers to set your
system apart from the crowd. All custom paint schemes are available on T1500-1bdCP and
T600-4 models. Due to the nature of each unit being custom, slight variation may occur.
DREAMSCAPE models will be 100% artist interpretation and will vary in theme and color.
Check www.rockfordfosgate.com for up to date styles. Get yours before they’re gone.
Don’t forget to use our Woofer WiringWizard to properly wire woofers to your amplifier with easy configurable diagrams.
WWW.ROCKFORDFOSGATE.COM
VOLUME ROCKFORDFOSGATE.COM41
P.O.W.E.R. (POWER OUTPUT WITHOUT EXCESSIVE REGULATION)
• Unlike a regulated power supply design, a Rockford Fosgate power supply continues to generate more than rated power as voltage increases
• Reduced strain on the vehicles charging system during normal operation
• Increases power as impedance is lowered
DTM (DYNAMIC THERMAL MANAGEMENT) Patent Pending
• Dramatically increases playtime under the most demanding scenarios
• Zero loss in perceived audio output
MEHSA (MAXIMUM EFFICIENCY HEAT SINK APPLICATION)
• Increases heat transfer (5X) from output devices to the heat sink
• More watts per cubic inch
BLUE L.E.D. STEALTH VU METERS• Displays signal and battery voltage (T2500-1bd)• Displays dual signal strength (T1000-4)
POWER SYNC• Two bd (Patent #6,097,249) amplifiers can be
“strapped” or bridged together to form one GIANT amplifier to power a single load or speaker- Over 5500 watts from one amp!
MASTER SYNC• Unique feature allows bd amplifiers to be linked
together via a master/slave switch giving the master amplifier complete control over every other amplifier it’s linked to via active preamp outputs
• Controls gain, EQ, crossover and infrasonic filters• Competitor mode- Gain control on slave amplifiers
turns into fine tuning (100x finer) for critical matching if needed to less than 0.01dB
PUNCH EQUALIZATION PATENT # 21323
• Corrects the acoustical deficiencies by delivering up to 3x the bass and/or treble
• Optional PEQ/PEQX3 (3 amplifiers from one remote) remote control available
CLASS LEADING WARRANTY• 2 year limited warranty • Additional 1 year w/ Engineered to
Rock accessory program
X L A M P L I F I E R S
PEQ/PEQX3
T1000-4 | T2500-1bdCP
ROCKFORD FOSGATE 2010 BUYER’S GUIDE 42
• MORE POWER - Up to 25% INCREASE• MORE OUTPUT at all impedances • UNLIMITED SYSTEM FLEXIBILITY
Our customers deserve MORE POWER. The 2010 Power Series amplifiers with Constant Power are the most powerful amplifiers on the market PERIOD. Constant Power delivers up to 25% more power across all impedance levels resulting in a listening experience that’s cleaner, louder and more impressive than ever before. Don’t be confused with competitive products that lock-in on a particular impedance level, Rockford’s proprietary technology ACTIVELY monitors your music and adjusts power to MAXIMIZE output.
NEWT1000-4 | T2500-1bdCP
NOW
BEFORE
T1000-4150X4 @ 4 OHMS
250X4 @ 2 OHMS
500X2 @ 4 OHMS BRIDGED
20Hz - 20kHz <0.1% 150MV - 5V >105dB >50dBH 2.14” X W 8.14” X L 21.9”
(X-LARGE CHASSIS)
T2500-1bdCP1500X1 @ 4 OHMS
2500X1@ 2 OHMS
2500X1 @ 1 OHMS
20Hz - 250Hz <1% 150MV - 4V >100dB N/AH 2.14” X W 8.14” X L 21.9”
(X-LARGE CHASSIS)
Rated PowerFrequencyResponse
THD+N @Rated Power
InputSensitivity
S/NRatio
ChannelSeparation Dimensions
NEW
VOLUME ROCKFORDFOSGATE.COM43
NEW - CONSTANT POWER• A circuit design actively monitors and increases voltage
and current as speakers impedance rises with music • More power delivered at 4 ohms and 2 ohms over a
traditional design• More power available over the effective frequency band as
opposed to a fixed voltage/current amplifier design• Up to 25% increase in total amplifier power • Optimized power at either a 2 or 1 ohm configuration
P.O.W.E.R. (POWER OUTPUT WITHOUT EXCESSIVE REGULATION)
• Unlike a regulated power supply design a Rockford Fosgate power supply continues to generate more than rated power as voltage increases
• Reduced strain on the vehicle’s charging system during normal operation
• Increases power as impedance is lowered
DTM (DYNAMIC THERMAL MANAGEMENT) Patent Pending
• Dramatically increases playtime under the most demanding scenarios
• Zero loss in perceived audio output
MEHSA (MAXIMUM EFFICIENCY HEAT SINK APPLICATION)
• Increases heat transfer from output devices to the heat sink• Transfers heat 5x better than traditional amplifiers• More watts per cubic inch• Improved component reliability
PUNCH EQUALIZATION PATENT # 21323
• Corrects the acoustical deficiencies in the listening environment, by delivering up to 3x the bass and/or treble
• Optional PEQ/PEQX3 (3 amplifiers from one remote) remote control available
24 dB/OCTAVE CONTINUOUSLY VARIABLE CROSSOVER• Increased speaker power handling coupled with a broader
frequency crossover range• Allows for superior integration between high pass and
low pass speakers
LOW IMPEDANCE STABILITY• 2 ohm mono / 1 ohm stereo stable on full range amplifiers• 1 ohm mono stable on bd (Patent #6,097,249) amplifiers
CLASS LEADING WARRANTY• 2 year limited warranty • Additional 1 year w/ Engineered to Rock accessory program
Calling These Amplifiers Top-Of-The Line Doesn’t do Them Justice,
Power Series amplifiers are the best your money can buy. The heart of ANY system, how your amplifier performs is directly related to how loud, long and clear your system will play. Rockford Fosgate Power Series two & four channel amplifiers give flexibility to your system design and the look to stop traffic. Our new mono amps, with Constant Power, are the most powerful amps we’ve ever developed. Are you ready to take your system to the highest level and beyond?
A M P L I F I E R S
T400-2 | T500-1bdCP
T600-2 | T400-4 | T1000-1bdCP
PEQ/PEQX3
ROCKFORD FOSGATE 2010 BUYER’S GUIDE 44
T1500-1bdCP | T600-4
T400-2120X2 @ 4 OHMS
200X2 @ 2 OHMS
400X1 @ 4 OHMS BRIDGED
20Hz - 20kHz <0.05% 150MV - 5V >105dB >50dBH 2.14” X W 8.14” X L 11.41”
(SMALL CHASSIS)
T600-2200X2 @ 4 OHMS
300X2 @ 2 OHMS
600X1 @ 4 OHMS BRIDGED
20Hz - 20kHz <0.05% 150MV - 5V >105dB >50dBH 2.14” X W 8.14” X L 13.66”
(MEDIUM CHASSIS)
T400-460X4 @ 4 OHMS
100X4 @ 2 OHMS
200X2 @ 4 OHMS BRIDGED
20Hz - 20kHz <0.05% 150MV - 5V >105dB >50dBH 2.14” X W 8.14” X L 13.66”
(MEDIUM CHASSIS)
T600-4100X4 @ 4 OHMS
150X4 @ 2 OHMS
300X2 @ 4 OHMS BRIDGED
20Hz - 20kHz <0.05% 150MV - 5V >105dB >50dBH 2.14” X W 8.14” X L 14.91”
(LARGE CHASSIS)
T500-1bdCP300X1 @ 4 OHMS
500X1@ 2 OHMS
500X1 @ 1 OHMS
20Hz - 250Hz <0.05% 150MV - 5V >100dB N/AH 2.14” X W 8.14” X L 11.41”
(SMALL CHASSIS)
T1000-1bdCP700X1 @ 4 OHMS
1000X1@ 2 OHMS
1000X1 @ 1 OHMS
20Hz - 250Hz <0.7% 150MV - 5V >100dB N/AH 2.14” X W 8.14” X L 13.66”
(MEDIUM CHASSIS)
T1500-1bdCP1000X1 @ 4 OHMS
1500X1@ 2 OHMS
1500X1 @ 1 OHMS
20Hz - 250Hz <0.8% 150MV - 5V >100dB N/AH 2.14” X W 8.14” X L 14.91”
(LARGE CHASSIS)
Rated PowerFrequencyResponse
THD+N @Rated Power
InputSensitivity
S/NRatio
ChannelSeparation Dimensions
NEW
NEW
NEW
VOLUME ROCKFORDFOSGATE.COM45
P.O.W.E.R. (POWER OUTPUT WITHOUT EXCESSIVE REGULATION)
• Unlike a regulated power supply design, a Rockford Fosgate power supply continues to generate more than rated power as voltage increases
• Reduced strain on the vehicle’s charging system during normal operation• Increases power as impedance is lowered
DTM (DYNAMIC THERMAL MANAGEMENT) Patent Pending
• Dramatically increases playtime under the most demanding scenarios• Zero loss in perceived audio output
MEHSA (MAXIMUM EFFICIENCY HEAT SINK APPLICATION)
• Increases heat transfer from output devices to the heat sink• Transfers heat 5x better than traditional amplifiers• More watts per cubic inch• Improved component reliability
PUNCH EQUALIZATION• Corrects the acoustical deficiencies in the listening environment,
by delivering up to 3x the bass and/or treble• Optional PEQ/PEQX3 (3 amplifiers from one remote) remote
control available• Patented design
12 DB/OCTAVE CONTINUOUSLY VARIABLE CROSSOVER• Increased speaker power handling coupled with a broader frequency
crossover range
LOW IMPEDANCE STABILITY• 2 ohm mono stable (P300-1)• 1 ohm mono stable on bd (Patent #6,097,249) amplifiers
CLASS LEADING WARRANTY• 1 year limited warranty• Additional 1 year w/ Engineered to
Rock accessory program
A M P L I F I E R S
P200-2 | P300-2 | P300-1 | P400-1
P500-2 | P400-4 | P500-4
P400-2 | P500-1bd | P700-1bd
PEQ/PEQX3
The Industry Standard.Rockford Fosgate PUNCH EQ has revolutionized the industry and PUNCH amplifiers are the benchmark. 2010 brings several new PUNCH amplifiers in four different chassis designs offering even more choices to how you design your performance audio system. The right amp for the right application, PUNCH amplifiers with RF exclusive technologies like P.O.W.E.R., DTM and MEHSA are sure to impress your friends and haul the mail.
ROCKFORD FOSGATE 2010 BUYER’S GUIDE 46
P1000-1bd
Rated Power
P200-250X2 @ 4 OHMS
100X2 @ 2 OHMS
200X1@ 4 OHMS BRIDGED
20Hz - 20kHz <0.05% 150MV - 4V >105dB >50dBH 2.2” X W 7.7” X L 9”
(MINI CHASSIS)
P300-275X2 @ 4 OHMS
150X2 @ 2 OHMS
300X1@ 4 OHMS BRIDGED
20Hz - 20kHz <0.05% 150MV - 4V >105dB >50dBH 2.2” X W 7.7” X L 9”
(MINI CHASSIS)
P400-2100X2 @ 4 OHMS
200X2 @ 2 OHMS
400X1@ 4 OHMS BRIDGED
20Hz - 20kHz <0.05% 150MV - 4V >105dB >50dBH 2.2” X W 7.7” X L 10.3”
(SMALL CHASSIS)
P500-2125X2 @ 4 OHMS
250X2 @ 2 OHMS
500X1@ 4 OHMS BRIDGED
20Hz - 20kHz <0.05% 150MV - 4V >105dB >50dBH 2.2” X W 7.7” X L 13”
(MEDIUM CHASSIS)
P400-450X4 @ 4 OHMS
100X4 @ 2 OHMS
200X2 @ 4 OHMS BRIDGED
20Hz - 20kHz <0.05% 150MV - 4V >105dB >50dBH 2.2” X W 7.7” X L 13”
(MEDIUM CHASSIS)
P500-460X4 @ 4 OHMS
125X4 @ 2 OHMS
250X2 @ 4 OHMS BRIDGED
20Hz - 20kHz <0.05% 150MV - 4V >105dB >50dBH 2.2” X W 7.7” X L 13”
(MEDIUM CHASSIS)
P300-1 150X1 @ 4 OHMS
300X1 @ 2 OHMS20Hz - 20kHz <0.1% 150MV - 4V >100dB N/A
H 2.2” X W 7.7” X L 9”(MINI CHASSIS)
P400-1 200X1 @ 4 OHMS
400X1 @ 2 OHMS20Hz - 20kHz <0.1% 150MV - 4V >100dB N/A
H 2.2” X W 7.7” X L 9”(MINI CHASSIS)
P500-1bd200X1 @ 4 OHMS
400X1 @ 2 OHMS
500X1 @ 1 OHMS
20Hz - 250Hz <0.8% 150MV - 4V >100dB N/AH 2.2” X W 7.7” X L 10.3”
(SMALL CHASSIS)
P700-1bd225X1 @ 4 OHMS
450X1 @ 2 OHMS
700X1 @ 1 OHMS
20Hz - 250Hz <0.8% 150MV - 4V >100dB N/AH 2.2” X W 7.7” X L 10.3”
(SMALL CHASSIS)
P1000-1bd250X1 @ 4 OHMS
500X1 @ 2 OHMS
1000X1 @ 1 OHMS
20HHz - 250Hz <0.8% 150MV - 4V >100dB N/AH 2.2” X W 7.7” X L 14.4”
(LARGE CHASSIS)
FrequencyResponse
THD+N @Rated Power
InputSensitivity
S/NRatio
ChannelSeparation Dimensions
NEW
NEW
NEW
Don’t forget to use our Amp Wire calculator to optimize your amplifier’s power output with properly sized (AWG) wires.
WWW.ROCKFORDFOSGATE.COM
VOLUME ROCKFORDFOSGATE.COM47
A M P L I F I E R S
P.O.W.E.R. (POWER OUTPUT WITHOUT EXCESSIVE REGULATION)
• Unlike a regulated power supply design a Rockford Fosgate power supply continues to generate more than rated power as voltage increases.
• Reduced strain on the vehicles charging system during normal operation.
• Ultra efficient Class D• Increases power as impedance is lowered.
PRIME-LOC• Allows an infinite number of amplifiers to be locked
together to form a custom look• Reduces amplifiers installation footprint• Improves thermal capacity
PUNCH BASS• Corrects the acoustical deficiencies in the listening
environment, by delivering up to 3x the bass.• On-Board control is a 45 Hz EQ• Punch remote level control (PLC) included to increase
or decrease overall output*R250-1/R500-1/R1000-1D only
12 DB/OCTAVE CROSSOVER• Increased speaker power handling coupled with a
broader frequency crossover range
LOW IMPEDANCE STABILITY• 4 ohm mono stable full range amplifiers• 2 ohm mono stable on mono amplifiers
CLASS LEADING WARRANTY• 1 year limited warranty
Prime-LocRemote Level Control
R150-2 | R250-1 | R1000-1d
ROCKFORD FOSGATE 2010 BUYER’S GUIDE 48
Breaking new ground in both performance and value, PRIME amplifiers take advantage of Rockford technologies at a level that everyone can attain. Built with the same P.O.W.E.R. technology as Punch and Power series amplifiers and available in five different models in two compact chassis sizes you’re “PRIMED” to build your system will all the right features.
R300-4 | R500-1
Throw down big,without throwing down big.
R150-250X2 @ 4 OHMS
75X2 @ 2 OHMS
150X1@ 4 OHMS BRIDGED
20Hz - 20kHz <0.1% 150MV - 8V >90dB >50dBH 2.4” X W 7.7” X L 11.54”
(SMALL CHASSIS)
R300-450X4 @ 4 OHMS
75X4 @ 2 OHMS
150X2 @ 4 OHMS BRIDGED
20Hz - 20kHz <1.0% 150MV - 8V >90dB >50dBH 2.4” X W 7.7” X L 16.65”
(LARGE CHASSIS)
R250-1 150X1 @ 4 OHMS
250X1 @ 2 OHMS20Hz - 250Hz <1.0% 150MV - 8V >100dB N/A
H 2.4” X W 7.7” X L 11.54”(SMALL CHASSIS)
R500-1 320X1 @ 4 OHMS
500X1 @ 2 OHMS20Hz - 250Hz <1.0% 150MV - 8V >100dB N/A
H 2.4” X W 7.7” X L 16.65”(LARGE CHASSIS)
R1000-1d 500X1 @ 4 OHMS
1000X1 @ 2 OHMS20Hz - 250Hz <1.0% 150MV - 8V >100dB N/A
H 2.4” X W 7.7” X L 11.54”(SMALL CHASSIS)
Rated PowerFrequencyResponse
THD+N @Rated Power
InputSensitivity
S/NRatio
ChannelSeparation Dimensions
NEW
NEW
PUSH THE ENVELOPE.We’ve raised the bar, again. If you’re looking to rattle windows and set car alarms off in the next town over, POWER subwoofers thump bass PERIOD.
THE STANDARD.With 26 different models PUNCH subs offer huge bass and the right installation for any system. Don’t just reach your system’s potential. PUNCH it.
THROW DOWN.Subs that are ready to ROCK and throw down the lows without emptying your wallet, PRIME woofers are the perfect first step into performance audio.
1
2
3
4
5
6
7
Don’t forget to use our Woofer BoxAdvisor because it contains recommended enclosures that optimize bass performance.
WWW.ROCKFORDFOSGATE.COM
VOLUME ROCKFORDFOSGATE.COM51
PARABOLIC TRIANGULAR CONE GEOMETRY SUPPORT SYSTEM• Bonds Aluminum parabolic dust cap to the aluminum
cone body• Reduces piston flex• Eliminates cone distortion
PRECISION CAST ALUMINUM ALLOY BASKET• Dual die-cast aluminum baskets with spider venting
adds rigidity and eliminates multiple acoustic resonances
• Large aluminum mass helps reduce voice coil former temperature and increase power handling
HIGH EXCURSION THERMO-RUBBER SURROUND• Tall/Profile surround allows for linear travel
characteristics on high excursion drivers without reducing piston size
MIRROR IMAGE SYMMETRICAL SPIDERS WITH EMBEDDED 12 AWG TINSEL LEADS• Dual-opposing spiders improve mechanical stability
under high excursion• Embedded tinsel leads shorten the length resulting in
lower resistance• Higher power handling
ANODIZED ALUMINUM VOICE COIL FORMER WITH FLAT EDGE WOUND COPPER CLAD ALUMINUM WIRE• Superior heat dissipation• Up to 100 degrees cooler at full power levels• Edge wound wire increases motor strength and
reduces overall weight
REMOVABLE AND REVERSIBLE SCREW CONCEALING RING• Cosmetically matching aluminum ring• Unique design allows woofer to be mounted either
in an inset position or inverted position to create a finished look
IDHS™ EMBEDDED COPPER HEAT SINK SHORTING RING• Reduces back EMF (electro-magnetic force)• Reduces distortion• Reduces voice coil temperature• Improves system efficiency
S U B W O O F E R S
T2 12” | 15”
NEW
ROCKFORD FOSGATE 2010 BUYER’S GUIDE 52
6
3
2
5
7
4
1
Built Like a TANK. Competition Grade.Power T2 subwoofers have been upgraded for 2010 with a new bad-ass look, revised cone, new spider design and better cooling that will make your competition shake in their boots. Available in both 12” & 15” sizes, the T2 is perfectly matched to Rockford’s Power Series amplifiers. Built like a tank, on a precision cast aluminum alloy basket, choose T2 and roll over the competition.
T2D212/T2D412 12” 1200 WATTS 2400 WATTS DUAL 2 Ω OR 4 Ω 1.00 CU. FT.2.00 CU. FT.
PORT: (1) 4”X12”83.5dB 9.00”
T2D215/T2D415 15” 1200 WATTS 2400 WATTS DUAL 2 Ω OR 4 Ω 2.00 CU. FT.2.75 CU. FT.
PORT: (1) 6”X17”86dB 10.00”
SpeakerSize
RMS PowerHandling
Peak PowerHandling
NominalImpedance
SealedEnclosure
PortedEnclosure Sensitivity
MountingDepth
NEW
NEW
1 9
10
2
3
4
5
6
7
8
VOLUME ROCKFORDFOSGATE.COM53
VAST™ (VERTICAL ATTACH SURROUND TECHNIQUE) SURROUND• Significantly increases a speaker’s effective radiating
cone area (up to 25%) without complicated installation issues
• Improved nominal efficiency• Maximized output capabilities• Patent Pending
FLEX FIT • Slot mounted pattern allows for variable adjustments
PARABOLIC TRIANGULAR CONE GEOMETRY SUPPORT SYSTEM• Bonds Aluminum parabolic dust cap to the Kevlar fiber
reinforced paper cone body• Reduces piston flex• Eliminates cone distortion
IDHS™ EMBEDDED COPPER HEAT SINK SHORTING RING• Reduces back EMF (electro-magnetic force)• Reduces distortion• Reduces voice coil temperature• Improves system efficiency
PROPRIETARY SWIFT™ (SELECTABLE WOOFER IMPEDANCE FUSED
TERMINAL) CONNECTION• Impedance selectable (1 or 4, 2 or 8)• Field replaceable fusing• Convenient wire access• Oversized 8 AWG inputs
PRECISION DIE-CAST ALUMINUM ALLOY BASKET• Die-cast aluminum baskets with spider venting adds
rigidity and eliminates multiple acoustic resonances• Large aluminum mass helps reduce voice coil former
temperature and increase power handling
HIGH EXCURSION TPE (THERMO-PLASTIC ELASTOMER) SURROUND• Tall/Profile surround allows for linear travel
characteristics on high excursion drivers without reducing piston size
SYMMETRICAL DUAL PROGRESSIVE ROLL TEAR RESISTANT POLY-COTTON SPIDERS• Dual-opposing spiders improve mechanical stability
under high excursion• Multipoint “periodic” stitched lead wire reduces mass,
stress and strain • Higher power handling
S U B W O O F E R S
10” | 12”
ANODIZED ALUMINUM VOICE COIL FORMER WITH COPPER CLAD ALUMINUM WIRE • Spun-laced Nomex collar improves voice coil bonding• Superior heat dissipation• Up to 100 degrees cooler at full power levels• Hard anodized finish increases former strength
REMOVABLE AND REVERSIBLE SCREW CONCEALING RING / GRILLE• Cosmetically matching aluminum ring• Unique design allows woofer to be mounted either in an
inset position or inverted position to create a finished look• Removable grille
2
NEW
ROCKFORD FOSGATE 2010 BUYER’S GUIDE 54
3
10
1
8
6
7
4
95
We’ve Raised the Bar, Again. ALL NEW from the ground up, 2010 Power Series T1 subwoofers build on Rockford Fosgate technologies first seen in our all new full range line. These bad boys have patented VAST technology that increases surface cone area up to 25% so the T1 performs like a much larger woofer. Flex Fit not only looks the part but gives extreme flexibility for extreme installations. Clean, high tech and ready to set off car alarms, the new T1 is here.
T1D210/T1D410 10” 600 WATTS 1200 WATTS DUAL 2 Ω OR 4 Ω 0.75 CU. FT.1.50 CU. FT.
PORT: (1) 4”X11”83dB 6.375”
T1D212/T1D412 12” 800 WATTS 1600 WATTS DUAL 2 Ω OR 4 Ω 1.25 CU. FT.1.75 CU. FT.
PORT: (1) 4”X9”86dB 6.75”
SpeakerSize
RMS PowerHandling
Peak PowerHandling
NominalImpedance
SealedEnclosure
PortedEnclosure Sensitivity
MountingDepth
NEW
NEW
Don’t forget to use our Woofer BoxWizard to calculate available air space inside your woofer enclosure.
WWW.ROCKFORDFOSGATE.COM
VOLUME ROCKFORDFOSGATE.COM55
P3 | P3S
PARABOLIC TRIANGULAR CONE GEOMETRY SUPPORT SYSTEM• Bonds parabolic dust cap to the Kevlar fiber reinforced
cone body• Reduces piston flex and eliminates cone distortion
DIE-CAST ALUMINUM BASKET• Dual die-cast aluminum basket with spider venting adds
rigidity and eliminates multiple acoustic resonances• Large aluminum mass helps reduce voice coil former
temperature and increase power handling• Ultra-shallow die-cast aluminum basket with 3.5”
mounting depth (P3S)
VENTURI-EFFECT CENTER POLE COOLING• Gradually reduces the air-flow exhaust path area, which
increases the air speed across key thermal masses of the speaker’s motor parts
• Maximizes cooling effectiveness
HIGH EXCURSION POLY-ETHERESTER SURROUND• Tall profile surround allows for linear travel
characteristics on high excursion drivers without reducing piston size
DUAL LINEAR SPIDERS WITH MULTIPOINT STITCHED 16 AWG TINSEL LEADS• Dual-opposing spiders improve mechanical stability
under high excursion• Multipoint “periodic” stitched lead wire reduces mass,
stress and strain over a greater area• Higher power handling and improved reliability• Progressive spiders with multipoint stitched tinsel
leads (P3S)
ANODIZED ALUMINUM VOICE COIL FORMER WITH SPUN LACED NOMEX COLLAR• Superior heat dissipation• Provides ideal bonding and strength at critical neck joint
junction• Hard anodized treatment increases former strength
REMOVABLE AND REVERSIBLE SCREW CONCEALING TRIM RING• Cosmetically matching cast aluminum trim ring• Unique design allows woofer to be mounted either in an inset position or inverted position to create a finished look• Optional grille available
S U B W O O F E R SP3 10” | 12” | 15”
ROCKFORD FOSGATE 2010 BUYER’S GUIDE 56
P3S 10” | 12”
Venturi-Effect Cooling (P3)
Mirror Imaged Spider (P3)
Size Comparison
P3
P3S
GREAT ForShallow
Applications
Shallow Depth
3.5”
The STANDARD. With 26 different models, PUNCH subwoofers deliver huge bass and the right installation for any system. Match with a PUNCH amp and these woofers will rip your face off. Is it the clean look? Is it the rock solid durability? Is it the class leading power handling? YES.
P3D210/P3D410 10” 400 WATTS 800 WATTS DUAL 2 Ω OR 4 Ω 0.60 CU. FT.1.40 CU. FT.
PORT: (1) 4”X14”83dB 6.25”
P3D212/P3D412 12” 500 WATTS 1000 WATTS DUAL 2 Ω OR 4 Ω 1.00 CU. FT.1.79 CU. FT.
PORT: (1) 4”X10”85dB 6.75”
P3D215/P3D415 15” 500 WATTS 1000 WATTS DUAL 2 Ω OR 4 Ω 1.60 CU. FT.2.66 CU. FT.
PORT: (1) 4”X10”86dB 7.625”
P3SD210/P3SD410 10” 300 WATTS 600 WATTS DUAL 2 Ω OR 4 Ω 0.50 CU. FT.0.75 CU. FT.
PORT: (1) 3”X12”83dB 3.5”
P3SD212/P3SD412 12” 400 WATTS 800 WATTS DUAL 2 Ω OR 4 Ω 1.00 CU. FT.1.25 CU. FT.
PORT: (1) 4”X12”86dB 3.625”
SpeakerSize
RMS PowerHandling
Peak PowerHandling
NominalImpedance
SealedEnclosure
PortedEnclosure Sensitivity
MountingDepth
Don’t forget to use our Woofer WiringWizard to properly wire woofers to your amplifier with easy configurable diagrams.
WWW.ROCKFORDFOSGATE.COM
VOLUME ROCKFORDFOSGATE.COM57
P2 | P1
PARABOLIC TRIANGULAR CONE GEOMETRY SUPPORT SYSTEM• Bonds parabolic dust cap to the cone body• Reduces piston flex• Eliminates cone distortion
VENTURI-EFFECT CENTER POLE COOLING (P2)• Gradually reduces the air-flow exhaust path area, which
increases the air speed across key thermal masses of the speaker’s motor parts
• Maximizes cooling effectiveness
HIGH DENSITY POLY-FOAM SURROUND• Proper stiffness and thickness provides optimum
performance
LINEAR SPIDER WITH MULTIPOINT STITCHED 16 AWG TINSEL LEADS• Multipoint “periodic” stitched lead wire reduces mass,
stress and strain over a greater area• Higher power handling • Improved reliability
ANODIZED ALUMINUM VOICE COIL FORMER WITH SPUN LACED NOMEX COLLAR• Superior heat dissipation• Provides ideal bonding and strength at critical neck
joint junction• Hard anodized finish increases former strength
REMOVABLE AND REVERSIBLE SCREW CONCEALING TRIM RING• Cosmetically matching trim ring• Unique design allows woofer to be mounted either in an
inset position or inverted position to create a finished look• Optional grille available
S U B W O O F E R S
P1 8” | 10” | 12” | 15”
Authentic Rockford PerformancePUNCH P1 & P2 subwoofers are the real deal. A favorite of bass enthusiasts worldwide, PUNCH P1/P2 woofers set the bar and set it high. So, ditch your factory 8” and build your first real box with a PUNCH P1/P2 15”. Now you can stop talking about how much bass you’ve got, and bring it.
ROCKFORD FOSGATE 2010 BUYER’S GUIDE 58
P2 8” | 10” | 12” | 15”
Venturi-Effect Cooling (P2)
Double Stacked Motor (P2)
Stitched Leads
P2D28/P2D48 8” 200 WATTS 400 WATTS DUAL 2 Ω OR 4 Ω 0.23 CU. FT.0.65 CU. FT.
PORT: (1) 2”X8”84dB 4.625”
P2D210/P2D410 10” 250 WATTS 500 WATTS DUAL 2 Ω OR 4 Ω 0.59 CU. FT.1.40 CU. FT.
PORT: (1) 4”X14”84dB 5.75”
P2D212/P2D412 12” 250 WATTS 500 WATTS DUAL 2 Ω OR 4 Ω 1.02 CU. FT.1.79 CU. FT.
PORT: (1) 4”X10”86dB 6.375”
P2D215/P2D415 15” 250 WATTS 500 WATTS DUAL 2 Ω OR 4 Ω 1.58 CU. FT.2.66 CU. FT.
PORT: (1) 4”X10”86dB 7.125”
P1S48/P1S88 8” 150 WATTS 300 WATTS SINGLE 4 Ω OR 8 Ω 0.23 CU. FT.0.65 CU. FT.
PORT: (1) 2”X6”84dB 4.125”
P1S410/P1S810 10” 150 WATTS 300 WATTS SINGLE 4 Ω OR 8 Ω 0.59 CU. FT.1.40 CU. FT.
PORT: (1) 3”X8”85dB 5.125”
P1S412/P1S812 12” 150 WATTS 300 WATTS SINGLE 4 Ω OR 8 Ω 1.02 CU. FT.1.79 CU. FT.
PORT: (1) 3”X6”86dB 5.875”
P1S415/P1S815 15” 200 WATTS 400 WATTS SINGLE 4 Ω OR 8 Ω 1.58 CU. FT.2.66 CU. FT.
PORT: (1) 4”X8”87dB 6.875”
SpeakerSize
RMS PowerHandling
Peak PowerHandling
NominalImpedance
SealedEnclosure
PortedEnclosure Sensitivity
MountingDepth
VOLUME ROCKFORDFOSGATE.COM59
HIGH-FLOW, LOW-NOISE SLOT PORT• LEAP (Loudspeaker Enclosure Analysis Program)
is utilized to determine the optimum port tuning for each subwoofer/enclosure model
• Maximizes acoustical output• Minimizes noise and distortion
PRECISION CONSTRUCTED WITH 5/8” MDF (MEDIUM DENSITY FIBERBOARD)
• Superior rigidity• Dampens unwanted acoustical resonances• Computer controlled machinery ensures precise
dimensional accuracy
LARGE AWG INPUT TERMINALS • Accepts standard banana plug• Easy connection for large 10 AWG speaker wire• Standardized 4 ohm nominal impedance accross
all models
INDUSTRIAL GRADE CARPET• Designed for the automotive environment using
hi-temp adhesives• High density and wear resistant
AVAILABLE FOR ALL PUNCH WOOFERS• Single or dual applications
E N C L O S U R E S
P3L-1X12
When You Want BASS and You Want it Done RIGHT Rockford Fosgate PUNCH LOADED enclosures are designed for one purpose, deliver maximum performance tuned EXACTLY for our PUNCH subwoofers. A no-compromise design, Rockford engineers use LEAP (Loudspeaker Enclosure Analysis Program) to match the enclosure to the specific PUNCH woofer. Only a factory tuned enclosure guarantees your system will bump big & look tight.
ROCKFORD FOSGATE 2010 BUYER’S GUIDE 60
P3L-2X12
P3L-S12
Shallow Loaded
Punch Loaded
Loaded Performance
Grille (optional)
6
-6
-9
-12
10 20 30 40 50 100 200 300 400 500 1K
-15
-18
-21
3
-3
0
Hz
dB
ROCKFORD FOSGATE (Single 12” Loaded)
R1P3P2P1P3S
GREAT ForTruck Installations
Slim Design
VOLUME ROCKFORDFOSGATE.COM61
WHAT A POWERED SUBWOOFER SHOULD BE• Real woofer• Real amp• Real enclosure
PROPRIETARY 12” SUBWOOFER • “Closed-loop” design ensures optimum performance
between subwoofer, amplifier and enclosure
INTEGRATED PUNCH AMPLIFIER• 300 watt P.O.W.E.R. (Power Output Without Excessive
Regulation) amplifier• Removable power/ground connector• RCA and speaker level inputs with auto turn-on circuit• On board EQ restoration
COMPACT ABS ENCLOSURE• Optimized slot ported enclosure • Woofer “loading plate” adds acoustical output and
protects woofer from damage• Multiple mounting configurations - vertical and
horizontal
OPTIONAL REMOTE LEVEL CONTROL• Existing Rockford (PEQ) remote transforms from an
EQ boost to a remote level control
POWERED SUBWOOFER ENCLOSURE
O V E R L O A D
Closed Loop System
Compact ABS enclosure
Overload Delivers Deep Tight Bass in a Sleek All-In-One Solution.This isn’t some low power “cone in a tube,” the Rockford Fosgate Overload comes to the party with a true 300 watts (max) of power and a 12” woofer enough to overload even the most bass hungry enthusiast. Quick disconnects give you the option for rapid removal for let’s say a set of golf clubs, or leave it in and tee-up some doom.
T A C T I L E T R A N S D U C E R
ROCKFORD FOSGATE 2010 BUYER’S GUIDE 62
Under-Seat Mount
THE ULTIMATE VEHICLE SPECIFIC BASS SOLUTION• No enclosure needed… just plug and play• Measures only H 2” x W 4.25” x L 6.875”• Mounts in any position and can be completely
hidden/covered• Can be used with or without a traditional
subwoofer• (Patent #7,402,922)
HOW DOES IT WORK?• Accurately and efficiently energizes the
listener’s auditory cortex without pressurizing surrounding air
• Transmits information via bone harmonics, skin galvanic (electrical properties of skin) and other direct stimulus routes
LOCALIZED BASS • When attached to a resonant surface, it will be
‘felt’ by only the listener in comparison to the sound produced by subwoofers and ordinary speakers
• An optimum sound quality level is often reached when you can just feel rather than hear the bass
• Reduced “noise pollution”
MULTIPLE INSTALLATION OPPORTUNITIES • Home theater• Gaming• Simulators• Amusement parks• Studios• Hearing impaired• Rear seat entertainment• Bass augmentation to existing automotive and
home systems
“BUTT SHAKERS” VS IBEAM• Butt shakers provide a narrow band of low
frequency vibration which the brain translates as “shaking”, whereas the IBEAM delivers a broad band of deep bass output that the human brain can recognize
6.875”
4.25”
2”
Compact Size
Short on Space But Want Killer Bass?The ultra compact Rockford Fosgate IBeam, IB-200, is your secret agent in the pursuit of the ultimate bass experience. Declassified as a tactile transducer, the I-beam is designed to stimulate your sense of touch with a heart pounding power handling of 250 watts RMS. We like our IBeam’s mounted directly to the seat frame here at Rockford. When spooled up on your frame, IBeam’s energy transfer will turn any system into a system that’s licensed to kill.
VOLUME ROCKFORDFOSGATE.COM63
S U B W O O F E R S
COMPRESSION STYLE SPEAKER CONNECTION• Accepts up to 10 AWG wire• Nickel plated
PARABOLIC MICA INJECTED POLYPROPYLENE CONE• Adds strength and rigidity• Provides resiliency against high power output• Full bodied sound
STAMPED STEEL FRAME• Textured abrasion resistant powder coated finish• Shallow mounting depth• Integrated mounting ring
R1S412
R1L-1X12
R1L-2X12
Expect More, Spend LessRockford Fosgate PRIME subwoofers are the perfect first step into performance audio. Purebred Rockford DNA, these woofers offer a value the competition just can’t match. When you combine the 2” voice coils and 150 watt power handling with a Prime amplifier, this system will always get it done. You’ve always wanted a Rockford system, now you can.
R1S410 10” 150 WATTS 300 WATTS SINGLE 4 Ω 0.75 CU. FT. N/A 86dB 4.57”
R1S412 12” 150 WATTS 300 WATTS SINGLE 4 Ω 1.02 CU. FT. N/A 87dB 5.00”
SpeakerSize
RMS PowerHandling
Peak PowerHandling
NominalImpedance
SealedEnclosure
PortedEnclosure Sensitivity
MountingDepth
NEW
ROCKFORD FOSGATE 2010 BUYER’S GUIDE 64
P O W E R E D L O A D E D
PROPRIETARY 10” OR 12” SUBWOOFER IN PRIME POWERED LOADED• “Closed-Loop” design ensures optimum performance
between subwoofer, amplifier and enclosure• 300 watt RMS class D amplifier• Robust Power/Ground connector• RCA and speaker level inputs • On board EQ restoration• Includes remote level control• Hi-efficiency amplifier design, low current - perfect
for hybrids
PRECISION CONSTRUCTED WITH 5/8” MDF (MEDIUM DENSITY FIBERBOARD)
• Superior rigidity• Dampens unwanted acoustical resonances• Computer controlled machinery ensures precise
dimensional accuracy
LARGE AWG INPUT TERMINALS • Accepts standard banana plug• Easy connection for large 10 AWG speaker wire
INDUSTRIAL GRADE CARPET• Designed for the automotive environment using
hi-temp adhesives• High density, wear resistant
R300-12
Hard Hitting, ALL-IN-ONE Bass SolutionThe All-New PRIME POWERED LOADED bass solution mixes it up with leading edge Rockford Fosgate technology in a small affordable package. Armed with a 300 watt class D amplifier and either 10” or 12” PRIME subwoofer, the PRIME POWERED LOADED is a perfect add to your trunk, cargo area or behind your rear seat.
PUSH THE ENVELOPE.Once you hear them you’ll know. Power loudspeakers will transform your ride into a sonic experience so accurate and clear you might not want to get out of your car.
THE STANDARD.Don’t just listen to your music, feel it. Packed with features, just like its older brother POWER, PUNCH loudspeakers are for those who like it raw and loud.
THROW DOWN.With newly added components (R162-S & R152-S) PRIME loudspeakers are a perfect factory replacement for any vehicle. Rockford DNA throughout, PRIME loudspeakers get it done.
VOLUME ROCKFORDFOSGATE.COM67
COMPONENTS | COAXIALS
VAST (VERTICAL ATTACH SURROUND TECHNIQUE) BUTYL RUBBER SURROUND• Significantly increases a speaker’s effective radiating
cone area (up to 25%) without complicated installation issues
• Improved nominal efficiency• Maximized output capabilities• Patent Pending
FLEX FIT • Slot mounted pattern allows for flexible installation
MULTI-OEM• OEM adaptor plate designed to allow single skus for
multiple vehicle applications• Allows round component or coax to fit in certain
4x6”/5x7”/6x9” openings
ICC (INTEGRATED CONCEALED CROSSOVER) COAXIAL
• Reduces installation time• Cleaner and easier installation
EXTERNAL AUDIOPHILE GRADE COMPONENT CROSSOVER• 5% tolerance high quality poly-capacitors and
Air-core inductors• PTC (positive temperature coefficient) protection
device with bypass resistor for 100% playtime• 3 level tweeter attenuation• On axis/off axis tweeter configuration
ALUMINUM DOME TWEETER WITH POLYURETHANE SUSPENSION (COAXIAL)
• Damped chamber for optimum frequency response• DDC (Discreet Dual clamp) component mounting
provides concentric clamping pressure around the perimeter of the mounting hole
• Maximized ease of installation and fitment-Standard 1 ¾” hole saw
TREATED FABRIC DOME NEO-TWEETER WITH INTEGRAL SUSPENSION (T1 COMPONENT)
• Damped chamber for optimum frequency response• DDC (Discreet Dual clamp) component mounting
provides concentric clamping pressure around the perimeter of the mounting hole
• Maximized ease of installation and fitment- Standard 1 ¾” hole saw
S P E A K E R S
T1652
T1652-S
Define the Edge.POWER loudspeakers will transform your ride into a sonic experience so accurate and clear you might not want to get out of your car.
From our billet machined aluminum phase plug, to our audiophile grade component crossover, POWER loudspeakers’ superior performance compliments the audiophile in all of us. Factor in patented VAST technology that increases cone area and you’ve got the ability to out perform others with so called same size speakers. Whether you’re looking for a coaxial solution or a true component system, POWER series has a speaker for you.
ROCKFORD FOSGATE 2010 BUYER’S GUIDE 68
NEW T2 COMPONENTS
BILLET MACHINED ALUMINUM PHASE PLUG • Reduces distortion • Improves thermal capacity
ALUMINUM DOME NEO-TWEETER WITH INTEGRAL SUSPENSION• Tuned chamber for optimum frequency response• DDC (Discreet Dual clamp) component mounting
provides concentric clamping pressure around the perimeter of the mounting hole
• Maximized ease of installation and fitment-Standard 1 ¾” hole saw
• Patent Pending design
T2652-S
T252-S 5.25” 1” 75 WATTS 150 WATTS 65Hz-22kHz 87dB 4.80” 2.03”
T2652-S 6.5” 1” 100 WATTS 200 WATTS 55Hz-22kHz 89dB 5.59” 2.51”
T2T-S N/A 1” 75 WATTS 150 WATTS 3kHz-22kHz 90dB1.75”
*FLUSH MOUNT
0.95”*FLUSH MOUNT
T152-S 5.25” 1” 75 WATTS 150 WATTS 65Hz-20kHz 87dB 4.80” 2.03”
T1652-S 6.5” 1” 100 WATTS 200 WATTS 55Hz-22kHz 89dB 5.59” 2.51”
T1T-S N/A 1” 75 WATTS 150 WATTS 3kHz-22kHz 90dB1.75”
*FLUSH MOUNT
0.95”*FLUSH MOUNT
T142 4 0.75” 40 WATTS 80 WATTS 90Hz-22kHz 86dB 4.06” 1.79”
T152 5.25” 1” 60 WATTS 120 WATTS 65Hz-22kHz 86.5dB 4.80” 2.03”
T1S652 6.5” 1” 70 WATTS 140 WATTS 65Hz-22kHz 88dB 5.04” 1.93”
T1652 6.5” 1” 75 WATTS 150 WATTS 55Hz-22kHz 89dB 5.59” 2.51”
T1462 4”X6” 0.75” 45 WATTS 90 WATTS 75Hz-24kHz 85.5dB 3.78” X 5.79” 2.00”
T1572 5”X7” 1” 70 WATTS 140 WATTS 60Hz-22kHz 87dB 4.80” X 7.13” 2.30”
T1682 6”X8” 1” 80 WATTS 160 WATTS 55Hz-22kHz 88dB 5.08” X 7.32” 2.60”
T1692 6”X9” 1” 100 WATTS 200 WATTS 50Hz-22kHz 90dB 5.78” X 8.58” 3.43”
T1693 6”X9” 1” 100 WATTS 200 WATTS 50Hz-22kHz 90dB 5.78” X 8.58” 3.43”
SpeakerSize
TweeterSize
RMS PowerHandling
Peak PowerHandling
Frequency Response
Sensitivity(1w/1w)
Mounting Diameter
MountingDepth
NEW
NEW
NEW
NEW
VOLUME ROCKFORDFOSGATE.COM69
COMPONENTS | COAXIALS
VAST (VERTICAL ATTACH SURROUND TECHNIQUE) BUTYL RUBBER SURROUND• Significantly increases a speaker’s effective radiating
cone area (up to 25%) without complicated installation issues
• Improved nominal efficiency• Maximized output capabilities• Patent pending
FLEX FIT • Slot mounted pattern allows for flexible installation
MULTI-OEM• OEM adaptor plate designed to allow single skus for
multiple vehicle applications• Allows round component or coaxial to fit in certain
4x6” / 5x7” / 6x9” openings
ICC (INTEGRATED CONCEALED CROSSOVER)
• Decreases installation time on components• Cleaner and easier installation
PEI DOME TWEETER • DDC (Discreet Dual Clamp) component mounting
provides concentric clamping pressure around the perimeter of the mounting hole
• Maximized ease of installation and fitment (Standard 1 ¾” hole saw)
S P E A K E R SP1653
P1S652
P1S652
1.89”
GREAT ForShallow OEMApplications
Shallow Depth
ROCKFORD FOSGATE 2010 BUYER’S GUIDE 70
P152-S
Don’t Compromise.PUNCH loudspeakers are for those who like it raw and loud. Our patented VAST feature delivers more volume and deeper bass response while our PEI dome tweeter and injection molded cone keep the vocals ultra clear. Designed as a drop in replacement for your factory speakers, we make sure the installation is seamless. Our multi-OEM plate and flex fit basket ensure a proper fit into your ride. While our power handling lets you pull the power you’re craving. Don’t just listen to your music, feel it.
P152-S 5.25” 1” 50 WATTS 100 WATTS 70Hz-22kHz 87dB 4.81” 1.87”
P1652-S 6.5” 1” 60 WATTS 120 WATTS 60Hz-22kHz 89dB 5.57” 2.17”
P1T-S N/A 1” 60 WATTS 120 WATTS 3.5kHz-22kHz 90dB1.75”
*FLUSH MOUNT
0.91”*FLUSH MOUNT
P132 3.5” 0.5” 20 WATTS 40 WATTS 120Hz-22kHz 85dB 3.21” 1.38”
P142 4” 0.75” 30 WATTS 60 WATTS 100Hz-22kHz 86.5dB 4.04” 1.69”
P152 5.25” 0.75” 40 WATTS 80 WATTS 70Hz-22kHz 87dB 4.81” 1.87”
P1S652 6.5” 0.75” 55 WATTS 110 WATTS 65Hz-22kHz 88dB 5.05” 1.89”
P1653 6.5” 0.75” 60 WATTS 120 WATTS 60Hz-24kHz 89dB 5.57” 2.17”
P1462 4”X6” 0.75” 35 WATTS 70 WATTS 90Hz-22kHz 87.5dB 3.63” X5.80” 1.81”
P1572 5”X7” 0.75” 60 WATTS 120 WATTS 75Hz-22kHz 89dB 4.58” X 6.71” 2.20”
P1683 6”X8” 0.75” 65 WATTS 130 WATTS 65Hz-24kHz 90dB 4.88” X 6.92” 2.28”
P1692 6”X9” 0.75” 75 WATTS 150 WATTS 60Hz-22kHz 91dB 5.62” X 8.28” 3.07”
P1694 6”X9” 0.75” 75 WATTS 150 WATTS 60Hz-24kHz 91dB 5.62” X 8.28” 3.07”
SpeakerSize
TweeterSize
RMS PowerHandling
Peak PowerHandling
FrequencyResponse
Sensitivity(1w/1w)
MountingDiameter
MountingDepth
VOLUME ROCKFORDFOSGATE.COM71
MICA INJECTED POLYPROPYLENE CONE• Adds strength and rigidity• Provides resiliency against high power output• Full bodied sound
18 AWG STAMPED STEEL FRAME• Textured abrasion resistant powder coated finish• Direct OEM mounting applications• Shallow mounting depth
½”/13MM MYLAR BALANCED DOME TWEETER• Lightweight mylar combines high sensitivity and
smooth extended frequency response• Ensures low distortion• Provides an open sound stage• Multiple mounting configurations- flush-surface-angle
R1693
R152S P E A K E R S
ROCKFORD FOSGATE 2010 BUYER’S GUIDE 72
R1652-S
Stock is for Sissies.Sick of that factory paper cone speaker vibrating your door panel loose? We thought so; we’ve designed PRIME loudspeakers to be a no-compromise factory replacement speaker that delivers authentic Rockford sound at a PRIME price point. The ultra lightweight poly cone and dome tweeter make the PRIME drivers efficient enough to hook up directly to your factory head-unit. If you want to kick it up, add a PRIME four channel R300-4 amplifier.
With our line of coaxial speakers and our newly added component sets (R162-S, R152-S) PRIME loudspeakers are a perfect fit for any vehicle.
R152-S 5.25” 1” 40 WATTS 80 WATTS 58Hz-20kHz 85dB 4.76” 1.91”
R1652-S 6.5” 1” 40 WATTS 80 WATTS 55Hz-20kHz 89dB 5.71” 2.17”
R1T-S N/A 0.50” 40 WATTS 80 WATTS 2.5KHz-22kHz 88dB1.83”
*FLUSH MOUNT
0.76”*FLUSH MOUNT
R152 5.25” 0.50” 35 WATTS 70 WATTS 53Hz-22kHz 87dB 4.78” 1.91”
R1653 6.5” 0.50”/0.75” 40 WATTS 80 WATTS 48Hz-22kHz 89dB 5.61” 2.00”
R1682 6”X8” 0.50” 50 WATTS 100 WATTS 57Hz-20kHz 88dB 5.08” X 7.32” 2.54”
R1693 6”X9” 0.50”/0.75” 60 WATTS 120 WATTS 48Hz-22kHz 90dB 6.02” X 6.74” 2.65”
SpeakerSize
TweeterSize
RMS PowerHandling
Peak PowerHandling
FrequencyResponse
Sensitivity(1w/1w)
MountingDiameter
MountingDepth
NEW
NEW
NEW
NEW
VOLUME ROCKFORDFOSGATE.COM73
SUBWOOFERS | COAXIALS
MARINE GRADE APPROVED• 100% UV stable CENTREX® injection molded plastic• Corrosion resistant gold plated polarized terminals• Injection molded polypropylene cone with UV inhibitors• Internal full magnetic shielding (subwoofers only)• Stainless steel grilles and mounting hardware
VAST (VERTICAL ATTACH SURROUND TECHNIQUE) THERMO-PLASTIC ELASTOMER SURROUND• UV and salt-fog resistant• Significantly increases a speaker’s effective radiating cone
area (up to 25%) without complicated installation issues• Improved nominal efficiency• Maximized output capabilities• Patent pending
FLEX FIT • Slot mounted pattern allows for flexible installation
ICC (INTEGRATED CONCEALED CROSSOVER) COAXIALS• Reduces installation time• Cleaner and easier installation
1” ALUMINUM DOME TWEETER• Bridge mounted component tweeter• Eliminates the need for external tweeter mounting surfaces
and reduces installation time• Integrated 12 dB/octave crossover with protection circuit
REMOVABLE TRIM RINGS• Available in black or white
So you’ve convinced the better half that the lake chariot needs an upgrade, you’ve told her that she needs to hear the detail in the music while she’s behind the tournament inboard. Yeah right! When’s the last time she’s even been on the boat? The M2 oversized 8” full range speakers mount perfectly on a wide range of towers to keep you smiling on the short line.
Ready to idle your party barge into the cove and serve notice that you’ve arrived? M2 subs prove that it doesn’t take haulin’ on the open lake to create the biggest wake! With both 10” & 12” sizes available, now you just need to find the right track to kick it up a notch and those bikini tops will start flying.
However you choose to spend your day on the water, you’ll own it with M2 Marine Grade.
OWN the Lake.MAR INE GRADE
M262 | M262B
M282 | M282B
GREAT ForWake Tower Applications
ROCKFORD FOSGATE 2010 BUYER’S GUIDE 74
M212S4 | M212S4B
M212S4 | M212S4B
*Infinite baffle compatible
M210S4M210S4B
10” 250 WATTS 500 WATTS SINGLE 4 Ω 0.75 CU. FT.1.25 CU. FT.*
(1) 4”X8.5” PORT86dB 9.00” 5.54”
M212S4M212S4B
12” 300 WATTS 600 WATTS SINGLE 4 Ω 1.00 CU. FT.1.50 CU. FT.*
(1) 3”X5.74” PORT87dB 10.95” 6.58”
SpeakerSize
RMS PowerHandling
Peak PowerHandling
NominalImpedance
SealedEnclosure
PortedEnclosure Sensitivity
MountingDiameter
MountingDepth
M262M262B 6.5” 1” 75 WATTS 150 WATTS 53Hz-22kHz 88dB 5.15” 2.80”
M282M282B 8” 1” 100 WATTS 200 WATTS 48Hz-22kHz 90dB 7.09” 3.42”
SpeakerSize
TweeterSize
RMS PowerHandling
Peak PowerHandling
FrequencyResponse
Sensitivity(1w/1w)
MountingDiameter
MountingDepth
VOLUME ROCKFORDFOSGATE.COM75
ENGINEERED TO ROCK • Industry leading warranty program • Adds 1 year of extended warranty with
qualifying amp kit purchase
AMPLIFIER INSTALLATION KITS• Power only• Power with interconnects• Complete kits available
FULL SPECIFICATION WIRE• 100% Oxygen free copper • AWG (American Wire Gauge) standard... Every
strand, every time • Ensures 100% potential of the amplifiers
and speakers• Power in = Power out
FULL SPECIFICATION BRASS• All distribution, fused distribution, and battery
terminals are manufactured using the highest quality standards of brass available
• No “pot metal” allowed
HIGH PERFORMANCE CAPACITORS• Low ESR (Equivalent Series Resistance)• 16volt-20volt peak• Solid brass connectivity• Improves sound quality with louder, harder
hitting bass• Extends battery life• Carbon-electrolytic hybrid capacitors available
DEADSKIN • Premium sound deadening material • Foil backing• Butyl rubber high temp construction• Available in 20 sq. ft. kit• More bass from the same space
F U L L S P E C I F I C A T I O NA C C E S S O R I E S
Don’t Skimp Now.OK, you’ve spent months researching the perfect amp, sub and full range speakers for your dream system. You picked up some OT at work and saved every penny to make sure your ride will bring the doom. Now it’s go time player and you’re going to connect this stuff with a bunch of strands? This will take you from hero to zero quicker than the speed of sound.
Don’t let your new gear down, Rockford Fosgate accessories are designed to extract maximum performance and reliability all the time, every time.
ROCKFORD FOSGATE 2010 BUYER’S GUIDE 76
Don’t forget to use our AMP WIRING & WOOFER WIRING WIZARDS to get the right specs for your installation.
WWW.ROCKFORDFOSGATE.COM
RCAsPEQX3
Circuit BreakerBadge Kit
Capacitor Distribution
Deadskin
VOLUME ROCKFORDFOSGATE.COM77
Please VISIT ROCKFORDFOSGATE.COMFOR MORE PRODUCTS AND DETAILS
ROCKFORD FOSGATE 2010 BUYER’S GUIDE 78
Pictured left: POPF-HOODY and POPF-GIRLYT
ROCKFORD FOSGATE, POWER, PUNCH, 3SIXTY and associated logos where applicable are registered trademarks of Rockford Corporation in the United States and/or other countries. Punch Loaded is a trademark of Rockford Corporation in the United States and/or other countries. All other trademarks are the property of their respective owners. ©2010 Rockford Corporation. All Rights Reserved. Specif ications subject to change without notice.
www.rockfordfosgate.com • 800.366.2349 • 600 S. Rockford Drive, Tempe, AZ 85281
VO
LUM
E MA
GA
ZINE ISSU
E 2.5
WW
W.R
OCKFO
RD
FOSG
ATE
.COM