Volterra - assetserver.netassetserver.net/_Assets/Lava Heat/PDF/VOLTERRALP-manual.pdf · $ozd\v...
Transcript of Volterra - assetserver.netassetserver.net/_Assets/Lava Heat/PDF/VOLTERRALP-manual.pdf · $ozd\v...
Owner’s Manual
Questions, problems, missing / replacement parts? Before returning to your retailer, call our customer service department at 1.888.779.5282, 10 a.m.-6:00 p.m. PST, Monday-Friday or email [email protected]
VolterraOUTDOOR FIREPIT TABLE
If you smell gas:1. Shut off gas to the appliance.2. Extinguish any open flame.3. If odor continues, keep away from the appliance andimmediately call you gas supplier or fire department.
WARNING
Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
An LP-cylinder not connected for use shall not be storedin the vicinity of this or any other appliance
CAUTION:Installer: Leave the manual instructions to the user for future use.
Consumer: Please keep this manual for future reference.
Read the instructions before use.This appliance must be installed in accordance with such regulations as are in force.
MODEL: VOLTERRA
FOR OUTDOOR USE ONLY
WARNING
WARNING
4
PACKAGE CONTENTS
Lid handle
Fire bowl lid
Grid
Burner assembly
Table top panel
Front panel
Right panel
Rear panel
Left panel
Part Description Quantity
A
BC
DE
G
1 pc
1 pc
1 pc
1 pc
4 pcs
1 pc
1 pc
1 pc
1 pc
AB
P
C
D
E
F
G
H
Q
I K
F
Cylinder holder assembly
Connection bar
Sliding track
Stator
Caster
Cylinder clamp screw
Part Description Quantity
HI
J
KL
1 pc
1 pc
2 pcs
2 pcs
2 pcs
M
NO
PQ
J
M
N
O
1 pc
1 bag
1 pc
Lava rocks
Limited strip
L
8
Step 3
Step 4
Attach the right panel (G) and limited strip (Q) to thefront panel (F) & rear panel (H) with 6 M6x14mm bolts(AA) (Fig. 3)
AA
Hardware Used
M6 x 14 Bolt X 6
BB
Hardware Used
M4 X 10 Bolt X 4
Attach the connection bar (K) to the front paneland rear panel (F & H) with 4 M4 x 10 mm bolts (BB).(Fig. 4)
ASSEMBLY INSTRUCTIONS
Fig. 4K
BB
Q
MAINTENANCE/STORAGE
16
STORAGE
To obtain the best performance from your fire pit, you must perform the following storage and maintenance activities on a regular basis:
Allow at least 35 minutes for the fire pit to cool down after use, and then disconnect and remove the cylinder.
Cylinder must be stored outdoors in a well-ventilated area out of the reach of children.When the cylinder is disconnected, tightly
install the threaded valve plugs,and do not store it in a building, garage or any other closed area.
You may store indoors ONLY if the cylinder is disconnected and removed.
Keep the fire pit area clear and free from combustible materials, gasoline and other flammable vapors and liquids.
If you are not using the fire pit, cover it with a PVC cover (not included) to protect from weather or other adverse elements.
A qualified service person should install and repair the fire pit and inspect it annually.
It might be necessary to clean this fire pit frequently. You must keep the control compartment, burner and circulating air passageways clean.
MAINTENANCE
To clean the grid, use a soft brush after the burner and grid have cooled down completely. Never use a vacuum cleaner on the grid.
Store the fire pit indoors during the winter if it will be subjected to freezing temperatures.
Disconnect and remove the cylinder from the appliance before the appliance can be stored indoors .
Take out the batteries from the battery compartment during periods of extended inactivity or when transporting;
TROUBLESHOOTING
17
ONE-YEAR LIMITED WARRANTY
Gas leak
Low gas pressureClogged or dirty burner portsSpent battery
Gas odor
Delayed ignition
Incorrect burner flame
PROBLEM OBSERVED POSSIBLE CAUSE
Incorrect gas supply or pressureClogged or dirty burner ports
CORRECTIVE MEASURES
Check all gas connections
Check gas supply pressureClean burner parts--see manual sectionChange battery
Check gas supply pressureClean burner parts
1. The appliance has been manufactured under the highest standards of quality and workmanship. We warrant to the original consumer purchaser that all aspects of this product will be free of defects in material and workmanship for one (1) year from the date of purchase.
A replacement for any defective part will be supplied free of charge for installation by the consumer. Defects or damage caused by the use of other than genuine parts are not covered by this warranty. This warranty shall be effective from the date of purchase as shown in the purchaser’s receipt.
2. This warranty is valid for the original consumer purchaser only and excludes industrial, commercial or business use of the product, product damage due to shipment or failure which results from alteration, product abuse, or product misuse, whether performed by a contractor, service company, or consumer. We will not be responsible for labor charges and/or damage incurred in installation, repair or replacement, nor for incidental or consequential damage. This warranty gives you specific rights, and you may also have other rights that vary from state to state.