Vitek On Cue App Quick Guide for iPhone Use our ‘DVR Networking Guide’ to network your DVR BEFORE attempting to use this

guide!!!

Step 1: Open App Store.

Step 2: Search for ‘Vitek’.

Step 3: Install the ‘Vitek On Cue Viewer’.

Step 4: Open the On Cue Viewer.

Step 5: Click ‘DVR List’ and select ‘+ New’.

Step 6: Begin by entering a ‘Connection Name’. This can be any name of your choice.

Step 7: Add the IP Address or DDNS of your DVR. For example: 12.22.195.26.

Step 8: Enter the Port numbers from the ‘Network’ page of your DVR.

Step 9: Enter the ‘User Name’ and ‘Password’ for the DVR. The default ‘User Name’ is ADMIN and the default ‘Password’ is 1234

Step 10: Make sure none of the fields were left blank, then hit ‘Save’.

Step 11: Back at the Viewer DVR List, You should now see the DVR you just added. Select it and press ‘Connect’ at the bottom.

Step 12: Connect to your DVR and enjoy your Hi-Def cameras!

If you have any questions at all about this guide, or if you still haven’t had the chance to Network your DVR, please checkout our Tech Support FAQ for illustrated guides on whatever configuration questions you may have. Tech Support F.A.Q.: www.vitekcctv.com/Support.asp

VITEK Industrial Video Products, Inc.

Valencia CA, U.S.A.