JSS Academy of Technical Education, Bangalore- 560060

Department of Mechanical Engineering

Details of Candidates completed Ph.D.

SI. No Name and Institute of

Research Scholar

Date of Ph. D

awarded / viva-

voce

Name of the

University

1 Mr. Suresh Holi

JSSATE,

Bangalore

17/10/2019

Visvesvaraya

Technological

University,

Belagavi.

2 Mr. Hanumantharaya Gouda

M B

Department of Mechanical

Engineering, Sir M

Visvesvaraya Institute of

Technology, Bengaluru

11/10/2019

Visvesvaraya

Technological

University,

Belagavi.

3 Mr. Siddappa P N

JSSATE,

Bangalore

10/01/2020

Visvesvaraya

Technological

University,

Belagavi.

4 Mr. Santhosh Kumar B M

JSSATE, Bangalore

05/11/2018 Visvesvaraya

Technological

University,

Belagavi

5 Mr. Anilkumar K S

JSSATE, Bangalore

23/09/2019 National Institute

of Technology

Karnataka,

Surathkal.

6 Mr. Devappa

JSSATE, Bangalore

04/10/2019

Visvesvaraya

Technological

University,

Belagavi.

Patents Applied

Sl No. Title of the product CBR No. Date of filing

1

Tethered High Pressure Air Propelled Drone

for Mist Application of Agricultural

Enhancers.

32556 19/10/2017

2

Combustion Control Mechanism of a Bio-mass

Stove.

3923 12/02/2018

3 Portable Hazard Free Heat Generating Device.

10335 6/04/2018

4

Automatic Pneumatic Jack for Light Motor

Passenger Vehicle.

23057 18/07/2019

5 Two Stage Industrial Areca Leaf Shredder

26884 20/08/2019

Name of Applicant: Dr. Gowreesh S S

Industry Supported Laboratories

1. As a part of the MOU, M/s. Toyota Kirloskar Motor Pvt. Ltd., Bengaluru, has donated

two engines and transmission systems. These systems are prepared into cut sections to

have a real experience of how an engine and the transmission system work. The students

of our department will be benefitted by this centre to a greater extent. The lab is

established in a separate cabin in Workshop.

2. M/s. Bayerische Motoren Werke AG (India) has donated an Eight-speed Turbo Engine

with transmission system for demonstration purpose. The company has given training to

a faculty member on its operations. The process of converting it into a usable form for

students is under progress. The set up is kept in Energy Conversion Lab.

Pascal’s Day – Conference by FPSI

Topic: Pascal’s day Conference organized by FPSI

Date and Time: 19/06/2019

Venue: BIEC Ground, Bangalore

Participants: Final year Mechanical Engineering students.

Faculty coordinator: Dr. Gowreesh S S

FPSI coordinators: Mr. Subhadeep

Activities under SAE India

(2018-19) The students had developed a hybrid scooter. The TVS EGA Championship 2018 was held on

15th

– 16th

June 2018 at TVS Institute of Quality and leadership, Attibele, Bangalore. A total 11

teams across India had participated in the final event. Team of 15 students (12 ME + 03 ECE)

from our college has won the first prize.

Activity under SAE

The JSS REEV team is currently engaged in the finishing stages of the fabrication of the

hybrid car, and will be taking part in the final event in the month of November with the

valuable support from the college, faculty advisors and sponsors.

The JSS REEV Team took part in the virtual round of the event in the month of

February of 2019 hosted by SAE - General Motors at Acharya College and secured

the 1st place.

Receiving the winners trophy from Mr. Brian McMurray, Site Leader, General

Motors

Technical Centre-India

Presenting the trophy to the Principal

Rally Car Design Challenge – 2019

Team Tachyon Motorsport Student List

No Name Designation Semester

1 Niranjan V Captain VII

2 Ishan Mishra Vice Captain VII

3 Pramukh H S Team Manager VII

4 Prithvi P Deshpande Chassis Head VII

5 Dilip R Mohite Powertrain Head VII

6 Anirudh S Suspension Head VII

7 Karthik K Brakes Head VII

8 Yashwanth D Steering Head VII

9 Pradhyumna R

Team Member

VII

10 Ganesh S V VII

11 Gowtham S VII

12 Abhishek Tripathi VII

13 Naveen J J VII

14 Rakshith Kallur V

15 Nithin Raj V

16 Pratheek M Goutham III

17 Shilpa VII

18 Pradyumna C Bhat VII

19 Rahul S VII

20 Abhishek R V

21 Akash S V

22 Giridhar D S V

23 Rakesh Gowda VII

24 Rithvik Nanda Kishore VII

25 Sachin D Souza VII

26 S Gagan Deep VII

27 Bharadwaj Mantha V

Event: Rally Car Design Challenge - 2019' held at Bikaner, Rajasthan, from 2nd to 4th

October 2019.

Organizers: M/s. AMK Industries and M/s. AMZ Automotives, Jaipur.

Prizes won: First place in Manoeuvrability, First place in Static event, Second place in CAE

Second place in Business presentation.

Papers published in peer reviewed Journals / Conferences Sl.

No. Name of the Faculty Title of the publications

1 Dr. B.P. Shivakumar

1. Girish B.M., B.P. Shivakumar, Hanamantraygoud M. B.,& B.M.

Satish. Wear Behaviour of Hot Forged SiC reinforced Aluminium

6061Composite Materials, (2020), Australian Journal of Mechanical

Engineering. (Paper accepted).

2. Siddesh Matti, B. P. Shivakumar & Suresh Holi (2020). Effect of

Hybrid Reinforcement on Mechanical Behavior of Al7075 based

Composites. International Conference on Advances in Mechanical

Engineering Sciences ICAMES - 2020, P.E.S. College of Enginering,

Mandya, Karnataka. (Paper accepted).

3. B P Shivakumar, Mruthunjaya M, Yogesha K B & Siddappa P N

(2019). Mechanical and Tribological Characterization of Hybrid

Composites: A Review. Materials Today Proceedings, ICMMM,

VIT, Vellore. (Paper accepted).

4. Hanamantraygouda, M. B., Shivakumar, B. P., Siddappa, P. N.,

Sampathkumar, L., &Prashanth, L. (2018). Effect of Cold Forging on

Microstructure and Mechanical Properties of Al/SiC

Composites, IOP Conference Series: Materials Science and

Engineering. Vol. 310, No. 1, p. 012072.

5. Shivakumar, B. P., Hanamantraygouda, M. B., Prashanth, L.,

Yogesha, K. B., Siddappa P, & Mrityunjaya, M. (2019). Effect of

SiC Particulate on Dry Sliding Wear Behaviour of Al based Forged

Metal Matrix Composites. In IFToMM World Congress on

Mechanism and Machine Science, pp. 3903-3913.

2 Dr. Anandkumar R

Annigeri

1. Desai, S. G., Annigeri, A. R. and Timmana Gouda, A. (2019).

Analysis of a new single degree-of-freedom eight link leg mechanism

for walking machine. Mechanism and Machine Theory, 140, 747-

764.

2. Bala Naga Bharath Chinni, Baibhav, BharadwajMantha,

Akul Mathad, Bharath M, Dr. Anandkumar R Annigeri (2019).

Process Parameters of Chemical Machining, International Journal of

Engineering Research and Applications, vol. 9, no. 11, pp 32-34.

3. Shivamanappa. G. Desai, Anandkumar. R. Annigeri & A. Timmana

Gouda (2019). Analysis of a new single degree-of-freedom eight link

leg mechanism for walking machine. Mechanism and Machine

Theory, 140, pp 747-764.

4. Pavan Kumar M N, Anandkumar R Annigeri, Gowreesh S S, J S

Srikanta Murthy (2017). Performance Analysis of Biodiesel Derived

from Waste Cooking Oil on Four Stroke CI Engine, International

Journal of Engineering Research & Technology, 6(8), pp 504-508.

3 Dr. Bhimasen Soragaon

1. Bhimasen Soragaon, B P Mahesh, Anandkumar R Annigeri (2018).

Output level improvement in small and medium sized Manufacturing

enterprises with regard to factors influencing production workers.

IEOM Conference, Paris, July 26-27.

2. Bhargav H D Adiga, D S Giridhar, Deekshith A, Pooja V , Bharath N

Yada, Dr. Bhimasen Soragaon (2019). Electrical discharge

machining process parameters. International Journal of Latest

Technology in Engineering & Management , Volume 3,I ssue 6, pp

01-11.

4 Dr. BV Raghavendra

1. Mahendra Kumar, C. & Raghavendra B.V. (2020). Effect Of

Carbon Nanotube in Aluminium Metal Matrix Composites on

Mechanical Properties. Journal of Engineering Science and

Technology, 15(2). (Paper accepted for publication)

2. Raghavendra, B.V. (2019). Effect of Crossover Probability on

Performance of Genetic Algorithm in Scheduling of Parallel

Machines for BI- Criteria Objectives. International Journal of

Engineering and Advanced Technology, 9(1), 2827-2831.

3. Savina, J.P. & B.V.Raghavendra, BV. (2018). Effect of

Fabrication Methods on Mechanical Properties and Machining

Parameters of Aluminium Matrix Composites – A Review. Materials

Today: Proceedings, 5(10) , 22576- 22580.

4. Raghavendra, B.V. (2018). Scheduling in parallel machines

environment using genetic algorithm. Journal of Applied Engineering

Science, 16(1), 36-42.

5 Dr. Gowreesh S S

1. Singh A K, Pillai, Kundu, Mohan, Gowreesh (2019). Design and

development of an automatic solar powered digging seed sowking

and dripping machine. International Journal of Engineering and

Advanced Technology, ISSN: 2249-8958, Volume-8, Issue-3.

2. Gowreesh S S, SrikantaMurthy, Veeresh B R (2019). Effectiveness

of heat transfer intensifiers in a fluid channel. International Journal of

Mechanical Engineering and Technology, ISSN: 0976-6340,

Volume-8, Issue-3.

3. Gowreesh S S, Shivdeep D R (2019). Design and analysis of an

intake manifold in a multi-cylinder engine student formula car using

solid works and ansys. ISSN: 2395-0056, Volume-6, Issue-1 January

2019.

4. Karthik M, Singh, Sinha, Anand, Gowreesh (2018). Design and

development of unmanned chemical spraying rover for agricultural

applications. International Journal of Engineering and Advanced

Technology, ISSN: 2249-8958, Volume-9, Issue-9.

5. Naveen Kumar Pattar, Gowreesh S S (2017). Tar formation,

reduction and technology of tar during biomass

gasification/pyrolysis-an overview. International journal of

engineering research and technology, ISSN:2278-0181 Volume-6,

Issue- 8,

6. Gowreesh S S , Pavan Kumar, Anand Annigeri, Srikanta Murthy J S

(2017). Performance analysis of biodiesel derived from waste

cooking oil on four stroke CI engine. Internaitonal journal of

Engineering and Technical research. ISSN: 2278-0181, Volume-6,

Issue-8.

6 Dr. Mrutunjaya.M

1. Anantha Padmanabham, K C., Mruthunjaya, M., Shivakumar, B P.,

Yogesha K B., & Siddappa, P N. (2019). Microstructure Studies

and Mechanical Characterisation of T6 Heat treated Aluminium and

Copper Based Alloy Reinforced with Zircon and Graphite

Composite. Journal of Engineering Science & Technology, 14(4),

2063 – 2073.

2. Suresh, P M., & Mruthunjaya, M. (2018). Root Cause Analysis of

Forged Spline Yoke Shaft using Finite Element Method. Materials

Today: Proceedings, 5(11), 23491-23498.

7 Dr. K. B. Yogesha

1. Hemanth, J., &Yogesh, K. B. (2018). Finite Element Analysis (FEA)

and Thermal Gradient of a Solid Rectangular Fin with Embossing’s

for Aerospace Applications. Advances in Aerospace Science and

Technology, 3(03), pp 49.

2. Alam Radhika & Shailesh Rao A, Yogesh K B, Radhika, A. (2019).

Evaluating machining performance of AlSI 1014 steel using gingelly

oil as cutting fluid. Australian Journal of Mechanical Engineering,

pp 1-12.

3. Santhosh Kumar, D P Girish, K B Yogesha, M C Jeevan (2019).

Influence of hybrid reinforcement on thermal conductivity of Al7075

based composites. Materials Research Expres, Volume, 6 Issue,12

pp126570

8 Dr. B P Mahesh

1. Giridhar A, Govardhana N, Gaurav S Babu, Likitha S. N,

Gopinath R, Dr. B P Mahesh (2019). Laser beam machining

parameters and characteristics. International Journal of Latest

Technology in Engineering & Management, Volume 3, Issue 6,

pp 17-17.

2. Jayanth Soragaon, Ananth Prabhu M, Ankush Balehola,

Dr B P Mahesh (2019). Electrical Discharge Machining Process an

Overview. International Research Journal of Innovations in

Engineering and Technology, Volume 3, Issue 11, pp 52-57.

3. Rajanna. S & N. Rajesh Mathivanan Shreyas. P. S, B. P. Mahesh

(2018). A Prediction of Fatigue Life In GFRP Composite Laminates

Subjected To Low Velocity Impact, International Journal of

Mechanical and Production Engineering Research and Development

vol 8, issue 8, pp 363-368.

4. Mahesh B. P., Soragaon, B., & Annigeri A. R. (2018). Reduction of

Patient Wait Time at a Multi-Specialty Hospital using DMAIC

Methodology and Factor Analysis. International Journal of

Engineering & Technology, 7(4.25), 309-312.

9 Dr. T S

Nanjundeswaraswamy

1. Nanjundeswaraswamy T S, Nagesh P, Swamy D R (2020).

Leadership Styles In Mediating The Relationship Between Quality

Of Work Life And Employee Commitment. International Journal for

Quality Research. (Accepted for Publication).

2. Rashmi Srinivas, D.R. Swamy, T.S. Nanjundeswaraswamy (2020).

Scale Development Of Critical Success Factors For Quality

Management Practices: Evidence from Indian Manufacturing SMEs.

International Journal of Quality Engineering and Technology.

(Accepted for Publication).

3. Rashmi S, Nanjundeswaraswamy T S, Swamy D R (2020). Quality

Management Practices in Oil and Gas Industry. International Journal

for Quality Research. (Accepted for Publication).

4. T S Nanjundeswaraswamy (2019). Development And Validation Of

Job Satisfaction Scale For Different Sectors. International Journal for

Quality Research, 13(1).

5. Sagar V. D., & Nanjundeswaraswamy T. S. (2019). Artificial

Intelligence in Autonomous Vehicles-A Literature Review.

I-Manager's Journal on Future Engineering and Technology, 14(3),

56.

6. T S Nanjundeswaraswamy, V Beloor, D R Swamy, Nagesh (2019)

Empirical Study on Effect of Welfare Facilities on Job Satisfaction,

Advances In Management, 12(1).

7. Vanishree Beloor, T S Nanjundeswaraswamy, Swamy D R (2019).

Quality of work life – development and scale validation for textile

sectors in India. International Journal of Engineering and Advanced

Technology, Vol-8 Issue-6, pp 1736-1747.

8. Chaya J Swamy, Nagesh P, T S Nanjundeswaraswamy (2019).

Factors Effects on Employee Retention in Manufacturing Firms.,

International Journal of Engineering and Advanced Technology, Vol-

9 Issue-1, pp 4667-4672.

9. Anurag Raj, Anirudh V, Dr T S Nanjundeswaraswamy (2019).

Chemical Machining Process - An Overview. International Research

Journal of Innovations in Engineering and Technology, Volume 3,

Issue 11, pp 37-39.

10. Arvind Kumar, Apoorva S, Ashwin Kumar S B, Sumanth H U,

Dr T S Nanjundeswaraswamy (2019). Chemical Blanking and

Chemical Milling Process an Outline. International Journal of

Engineering Research and Applications, volume 9, no. 10, pp 83-86.

11. Rohith R, Shreyas B K, S Kartikgeyan, Sachin B A ,Umesha K R,

Dr. T S Nanjundeswaraswamy (2019). Selection of Non-Traditional

Machining Process, International Journal of Engineering Research &

Technology, volume 8, Issue 11, pp 148-155.

12. Nagendra A Raikar, Ramashiva R, Yathish N,

T S Nanjundeswaraswamy (2019). Ultrasonic Machining Process.

International Research Journal of Innovations in Engineering and

Technolog. 3(11), pp 82-89.

13. Rajathesh B C, Vinay G, Shivayogi C Akki , Dr T S

Nanjundeswaraswamy (2019). Process Parameters of Ultrasonic

Machining. International Journal of Recent Technology and

Engineering, 8(4), pp 8949-8955.

14. Nithin H R, Nikhil R, Nitin Kiran Nayak, Rakesh H R,

Manoj Kumar R, Dr T S Nanjundeswaraswamy (2019). Parameter

Affecting Ultrasonic Machining, International Journal of Engineering

Research & Technology, 8(11), pp 353-367.

15. Tejaswi Hegade, Jnaneshwar R. K, Likhith R. Nagarjuna,

Prahalad P. Babu, Srikanth A.K, Dr T.S. Nanjundeswaraswamy

(2019). Process Characteristics in Ultrasonic Machining.

International Journal of Engineering Research & Technology, 8(11),

pp 657-664.

16. Sidharth M Nambiar, Shyam Kumar Upadhyay, Shashank Kumar,

Vishnu Shankar Ojha, Raushan Kumar,

Dr T S Nanjundeswaraswamy (2019). A Detailed Report on Process

Parameters of Material Removal Rate in Abrasive Jet Machining.

International Research Journal of Innovations in Engineering and

Technology, 3(11), pp 90-93.

17. Subhash R. Bharadwaj, V.S.Adithya, S.SuryaSathvik, Rahul.D.B,

Ujwal N. Changappa, Mohan Krishna.G, Dr T Nanjundeswaraswamy

(2019). Process Parameters of Abrasive Jet Machining. International

Journal of Engineering Research and Applications, 8(11), pp 46-51.

18. Syed Aiman, R. S Bhargav, Vikhyath. V, Darshan K. A, Ashitraj. V,

Dr. T. S. Nanjundeswaraswamy (2019). Process Characteristics of

Abrasive Jet Machining. International Journal of Engineering

Research & Technology, 8(11), pp 593-598.

19. Khushaal B, Tejas H S, Preran K, Abhishek S, Saqlain Imran,

Dr T S Nanjundeswaraswamy (2019). Abrasive Water Jet

Machining. International Research Journal of Innovations in

Engineering and Technology, 3(11), pp 61-65.

20. Madhva Raj R, Sunil Adiga B K, Prateek P,

Dr T S Nanjundeswaraswamy (2019). Electro-Chemical Machining.

International Research Journal of Innovations in Engineering and

Technology, 3(11), pp 40-47.

10 Dr. Suresh Holi

1. B P Shivakumar & Suresh Holi (2018). Routing Flexibility in Job

Shop Scheduling Problem - A Genetic Algorithm Approach.

International Journal of Research and Scientific Innovation, 5(11), pp

60-64.

2. B P Shivakumar & Suresh Holi (2018). A Genetic Algorithm Based

Approach to Job Shop Scheduling with Sequence Dependent Setup

Times. International Journal of Latest Technology in Engineering,

Management & Applied Science, 7(10), pp 48-52.

11 Dr. K.M.Nataraja

1. Halewadimath, S. S., Banapurmath, N. R., Yaliwal, V. S., &

Nataraja, K. M. (2019). Effect of engine variables on combustion

characteristics of a dual fuel engine powered by Neem Oil Methyl

Ester (NeOME) and producer gas (PG). International Journal of

Ambient Energy, pp 1-37.

2. Nataraja, K. M., Banapurmath, N. R., Yaliwal, V. S., & Nandish

mathad (2020). Studies on performance, emission characteristics of

dual fuel engine fueled with brown briquette biomass and ricebran oil

biodiesel. International journal of vehicles structures and systems.

(Paper accepted).

12 Dr. B.G. Prashantha

1. Prashantha, B. G., Seetharamu, S., Narasimham, G. S. V. L., &

Kumar, M. P. (2019). Effect of Stack Spacing on the Performance of

Thermoacoustic Refrigerators Using Helium and Air as Working

Substances. International Journal of Air-Conditioning and

Refrigeration, 1950016.

2. Prashantha B.G., Seetharamu S., Narasimham G.S.V.L. & Praveen

Kumar M.R. (2019). Design and Analysis of Thermoacoustic

Refrigerators Using Air as Working Substance. International Journal

for Air-conditioning and Refrigeration, 27(1), pp 1950008-1950022.

3. Prashantha B.G., Seetharamu S., Narasimham G.S.V.L. & Bhimasen

Saragaon. (2019). Thermoacoustic Refrigeration: An Overview. 1st

International Conference on Applied Mechanical Engineering

Research, NIT Warangal.

4. Prashantha B.G., Govinde Gowda M.S., Seetharamu S. &

Narasimham G.S.V.L. (2018). Design and Analysis of Acoustically-

Driven 50 W Thermoacoustic Refrigerators. SADHANA- Springer &

Indian Academy of Sciences, 43 (82), pp 1-13.

13 Dr. Anilkumar K. S 1. Anil Kumar, K.S., Murigendrappa, S.M., & Hemantha Kumar

(2020). Influence of Tool Probe Offset and Traverse Speed on

Microstructure and Mechanical Properties of Friction Stir Weld

Dissimilar Joints of AA2024-T351 and AA7075-T651. Advances in

Additive Manufacturing and Joining, pp 555-567.

2. Anil Kumar, K.S., Murigendrappa, S.M., & Hemantha Kumar

(2019). Experimental investigation on effects of varying volume

fractions of SiC nanoparticle reinforcement on microstructure and

mechanical properties in friction-stir-welded dissimilar joints of

AA2024-T351 and AA7075-T651. Journal of Materials

Research, 34(7), pp 1229-1247.

3. Anil Kumar, K.S., Murigendrappa, S.M., & Hemantha Kumar

(2019). Experimental investigation on effects of varying volume

fractions of SiC nanoparticle reinforcement on microstructure and

mechanical properties in friction-stir-welded dissimilar joints of

AA2024-T351 and AA7075-T651. Journal of Materials

Research, 34(7), pp 1229-1247.

4. Anil Kumar, K.S., Murigendrappa, S. M., Kumar, H., & Shekhar, H.

(2018). Effect of tool rotation speed on microstructure and tensile

properties of FSW joints of 2024-T351 and 7075-T651 reinforced

with SiC nano particle: The role of FSW single pass. In AIP

Conference Proceedings, 1943(1), 020056.

14 Mr.T.K.Nagaraj

1. Nagaraja, T. K., Pavankumar, T. S. (2019). Development of Kinetic

Energy Recovery System By Mechanical Method on Four Wheeler,

International Journal of Mechanical and Production Engineering

Research and Development, 9, pp 39-45.

2. Nagaraja, T. K., Prashanth (2018). Design and development of solar

panel tracking mechanism, AIP Publishing, 2039 (1), 020014.

15 Mr. B.N.Venkatesh

1. Venkatesh, B. N. & M. S. Bhagyashekar (2018). Corrosion Studies

of AA6061-SiC Composites and AA6061-4.5%Cu-SiC hybrid

Composites before and after Friction Stir Welding. International

Journal of Engineering Science and Computing, 8(5), pp 17612-

17616.

2. Venkatesh, B. N., M. S. Bhagyashekar (2018). Wear behaviour of

friction stir welded AA6061-SiC composites and AA6061-4.5% Cu-

SiC hybrid composite plates. International Journal of Fracture and

damage mechanics, 4(5), pp 24-45.

16 Mr. Devappa

1. Devappa and Dr. T. M. Chandrashekharaiah (2018). Studies on the

Effect of Al-1Ti-3B and Al-10Sr Master Alloys on Fracture

Toughness and Fractographical Analysis of Binary Al-10Si Alloy,

International Journal of Latest Technology in Engineering,

Management & Applied Science, 7(3), pp 254 – 258.

2. Somashekar Hiremath, Devappa, T. M. Chandrashekharaiah,

& D.N. Roopa (2018). Effect of Structural Changes on

Microstructure, Mechanical Properties and Fractographical Analysis

of Binary Al-12si Base Alloy. International Journal of Research and

Scientific Innovation, 5(4), pp 339-343.

17 Mr. G.M.Swamy

1. Dhanush V, Bharath V, Dheeraj P S, Gagan C R, Ganesh V &

G M Swamy (2019). Plasma arc machining process parameters,

process characteristics. International Journal of Latest Technology in

Engineering & Management, 3(6), pp 18-21.

18 Mr. P.N.Siddappa

1. Siddappa P N, Mruthunjaya M, B P Shivakumar, Yogesha K B &

D P Girish (2019). The effect of TiC particulate reinforcement on dry

sliding wear behaviour of Al based composites. Materials Today

Proceedings, ICMMM, VIT, Vellore. (Paper accepted).

2. Abhishek R, Nuthan Babu G R, Aditya D, Ajay Kumar H, Siddappa

(2019). Electrochemical Machining Tooling Technique & Insulation

Materials, International Journal of Latest Technology in Engineering

& Management , 3(6), pp 01-04.

3. Siddappa, P. N., Shivakumar, B. P., Yogesha, K. B., Mruthunjaya,

M., & Hanamantraygouda, M. B. (2018). Machinability study of Al-

TiC metal matrix composite. In MATEC Web of Conferences (Vol.

144, p. 03001). EDP Sciences.

4. Siddappa, P. N., & Shivakumar, B. P. (2017). Characterization of

mechanical properties of Al/TiCP MMC. International Journal of

Materials Research, 108(2), 139-142.

19 Mrs. Roopa D N

1. Amarnath N A S, Akash S, Anand Shankar M, Akshay Kumar,

Roopa D N (2019). Working of Electrochemical Grinding and

Honing. International Journal of Engineering Research and

Applications, 9(11), pp 13-22.

20 Mr. Umamaheshwar

Hebbal

1. Umamaheshwar Hebbal & Bhimasen Soragaon (2020). Performance

analysis of nanofluid based photovoltaic thermal (PVT) solar

Collectors: A review. International conference – RARE 2020,

National Institute of Technology, Karnataka, India. (Paper accepted).

21 Dr. Santhosh Kumar B

M

2. Santhosh Kumar, B.M., Girish, D. P., Yogesha, K. B., & Jeevan, M.

C. (2019). Influence of hybrid reinforcement on thermal conductivity

of Al7075 based composites. Materials Research Express, 6(12),

126570.

3. Santhosh Kumar,B.M., Girish, D. P., & Girisha, H. N. (2018).

Evaluation of Wear characteristics of Aluminium 7075 based Metal

Matrix Composite. International Journal of Advances in Scientific

Research and Engineering, 4.

4. Santhosh Kumar, B. M., & Girish, D. P. (2018). Friction and wear

behaviour of tungsten carbide and E glass fibre reinforced Al7075

based hybrid composites. Materials Science and Engineering, 390(1),

pp 012002.

22 Mr. Kalmesh Ullagaddi

1. Kalmeshwar U, C R Mahesha, Shivarudraiah (2019). Tribological

Properties of Basalt Fibers - A Review, Materials Science Forum,

969, pp 335-342.

2. Kalmeshwar Ullegaddi, Dr. Shivarudraiah, Mahesha C R (2019).

Flexural Strength of Basalt Fiber Reinforced with Tungsten Carbide

Filler Filled Epoxy Composites, Journal of Emerging Technologies

and Innovative Research, 6(6), pp 791-795.