Visual Inspection

16
VOL 12.1 PRODUCTS AND SERVICES GUIDE ENVIRONMENTAL MONITORING • NON-DESTRUCTIVE TESTING REMOTE VISUAL INSPECTION • CEMS & SPECIALTY GAS Call Today! 800-242-3910

description

Ashtead Technology offers the most comprehensive fleet of visual inspection instruments in the industry. We specialize in carrying a wide range of pipe and tube inspection equipment as well as tractors and crawlers used in sewer and pipeline inspection applications. And when performing plant maintenance or periodic preventive maintenance, certified integrity inspections or internal inspections we can supply you with all of the tank and vessel instruments that your job requires. Ashtead also specializes in renting high-speed cameras suitable for monitoring and inspecting processes in industries where production lines move too fast for the human eye to troubleshoot potential issues.

Transcript of Visual Inspection

Page 1: Visual Inspection

VOL 12.1

PRODUCTS AND SERVICES GUIDEENVIRONMENTAL MONITORING • NON-DESTRUCTIVE TESTING

REMOTE VISUAL INSPECTION • CEMS & SPECIALTY GAS

Call Today!800-242-3910

Page 2: Visual Inspection

© 2

011,

Cas

ella

USA

, All

right

s re

serv

ed.

CASELLA BRAND SAMPLE PUMPS Intrinsically Safe

REAL TIME PARTICULATES Multi-Range Available

HEAT STRESS MONITOR Hand-Held WBGT

DATA MANAGEMENT SOFTWARE

CEL BRAND SOUND LEVEL METERS Octave & 1/3 Octave

NOISE DOSIMETERS Miniature Shoulder-Worn

CONSIDER casellausa.com800.366.2966

A Subsidiary of IDEAL INDUSTRIES, INC.

“Casella delivers easy to use instruments with exceptional

service... we should give them a call”

CEL

Page 3: Visual Inspection

CORPORATE HEADQUARTERS 10635 Richmond Ave., Suite 100 Houston, TX 77042 Phone 832 308 7600Fax 713 339 1823

UNITED STATES / CANADA

10201 McKalla Place, Suite EAustin, TX 78758 Phone 800 242 3910

14141 Airline Highway Oak Alley Bldg. #4, Suites P/Q Baton Rouge, LA 70817 Phone 225 610 1270 Fax 225 610 1271

If you would like more information on the product lines or services Ashtead Technology offers in addition to what you see in this catalog, please contact any of our offices listed below or visit our website at www.ashtead-technology.com.

3528-78 Avenue NW Edmonton, Alberta T6B 2X9 Phone 780 643 2680 Fax 780 468 3050

1450 Elmhurst Rd. Elk Grove Village, IL 60007 Phone 847 718 1246 Fax 847 718 1423

CEMs / Specialty Gases1474 Elmhurst Rd. Elk Grove Village, IL 60007 Toll Free 877 GAS RENT Phone 847 631 0002 Fax 847 758 2089

883 Airport Park Rd., Suite D Glen Burnie, MD 21061 Phone 410 766 2874Fax 410 766 2919

23575 Cabot Blvd., Suite 203 Hayward, CA 94545 Phone 510 732 6591 Fax 510 732 6595

10635 Richmond Ave., Suite 100 Houston, TX 77042 Phone 713 331 3924 Fax 713 331 3934

Park 100, 7144 Zionsville Rd., Bldg. 106 Indianapolis, IN 46268 Phone 317 238 3441 Fax 317 388 1124

18195 McDurmott E., Suites A/B Irvine, CA 92614 Phone 949 955 3930 Fax 949 955 3932

1016 West Eight Ave., Suite C King of Prussia, PA 19406 Phone 484 690 1001 Fax 484 690 1002

1395 S. Marietta Parkway Bldg. 100, Suite 122 Marietta, GA 30067 Phone 770 427 8533 Fax 770 427 8558

3505 Laird Rd., Unit 18 Mississauga, Ontario L5L 5Y7 Phone 905 607 9639 Fax 905 607 8592

3311 Preston Rd. Pasadena, TX 77505 Phone 281 991 1448 Fax 281 991 1449

1057 East Henrietta Rd. Rochester, NY 14623 Phone 585 424 2140 Fax 585 424 2166

2627 Metro Blvd. St. Louis, MO 63043 Phone 314 344 1079 Fax 314 344 5074

New locations are coming soon! Please check our website for more information.

Page 4: Visual Inspection

www.ashtead-technology.com

WHO WE ARE With offices spanning the globe, Ashtead Technology is one of the world’s leading providers of specialty inspection, testing and monitoring instrumentation. Our customers are found in industries as diverse as construction, power, manufacturing, survey, geotechnical, oil and gas and telecommunications, which means that we are accustomed to meeting tight deadlines and providing unique solutions to daily challenges.

As you will find in this Products and Services Guide, we specialize in Environmental Monitoring, Non-Destructive Testing (NDT), Remote Visual Inspection (RVI) and CEMS and Specialty Gas. We dedicate all of our resources to staying ahead of the ever advancing technologies these fields require for testing, sampling, monitoring, detecting or analyzing.

In June 2008 the management team, with backing from Phoenix Equity Partners (based London) successfully acquired the business in a management buyout from Ashtead Group plc., making Ashtead Technology a truly independent company. The Group is totally focused and committed to putting technical equipment into the hands of those who need it, either through short, medium or long term rental, as well as alternative financial offerings, including innovative programs such as our Rent To Own (RTO) and Perpetual Rental Program (PRP).

Throughout our development, we have invested heavily in our equipment – keeping the fleet up-to-date, in top condition and always ensuring that we have what you need available at short notice. Our commitment to the customer is simple – we provide technical advice on what to rent and how to use it; our availability of equipment is second to none and all our equipment is tested and ready for use.

Page 5: Visual Inspection

800-242-3910

THE ADVANTAGE OF RENTINGRenting is the most cost-effective way to utilize a piece of equipment without incurring all of the expenses associated with ownership, allowing your financial resources to be dedicated to your company’s core activities. Projects, deadlines and your requirements change, so it’s important to have all of the required equipment at hand. More and more organizations are switching to renting because of the economical advantages and convenience.

ASHTEAD TECHNOLOGY’S PERPETUAL RENTAL PROGRAMOur Perpetual Rental Program takes the benefits of renting even further by completely eliminating the return process. What is even better, this plan comes at a fraction of our standard monthly rate and still gives you continued access to our 24/7 technical support. Our PRP allows you to have all of the benefits of ownership and all of the advantages of renting.

RENT-TO-OWN AND SALESAshtead Technology now offers the option of rent-to-own as well as new and used equipment sales. Call us now to speak with a customer service representative about your equipment needs or visit our website for an updated list of instruments for sale.

REPAIR AND CALIBRATION SERVICEIn order for your equipment to function properly it requires routine calibration and maintenance. This process often requires your instrument to be sent back to the manufacturer, which can be expensive and cause you to be without your equipment for extended periods of time. Time you may not have. Let Ashtead Technology perform this service for you! Our factory trained technicians can diagnose and repair your equipment at our ISO: 9001 certified facility.

Page 6: Visual Inspection
Page 7: Visual Inspection

800-242-3910

2 Ambient Air Monitoring

3 Cleanroom Performance Testing

5 Confined Space Entry

8 Global Positioning

9 Hazardous Waste Investigation

11 HVAC Instruments

14 Indoor Air Quality

21 Industrial Hygiene

27 Positive Material Identification (PMI)

28 Sound, Noise & Vibration Monitoring

31 Toxic Gas Monitoring

36 Underground Location

37 Water Monitoring Instruments

43 Water Quality Instruments

44 Specialty Instruments

VTABLE OF CONTENTS

ENVIRONMENTAL MONITORING NON-DESTRUCTIVE TESTING

REMOTE VISUAL INSPECTION

CEMS

68 Videoprobes

69 Thermal Cameras

70 Pipe Inspection Cameras/Tractors

74 High Speed Video Cameras & RVI Accessories

48 Coating Inspection/Ultrasonic Thickness

50 Ultrasonic Flaw Detectors

55 ACFM

56 Eddy Current

58 Ground Penetrating Radar

59 Concrete Testing

60 Positive Material Identification (PMI)

62 Tank Inspection

63 Hardness Testers

65 Specialty Instruments

76 EPA Protocol Gases

78 Ambient Air Analyzers

81 EPA Source Analyzers NO/NO2/NOX

82 EPA Source Analyzers NO/NO2/NOX/O2/CO

83 EPA Source Analyzers NOX/SO2/CO/CO2/O2

84 EPA Source Analyzers O2/CO2

85 Total Hydrocarbon Analyzers (FID)

88 Combustion Analyzers

89 Probes, Conditioning Equipment & Accessories

APPENDIXi Metric Conversions

ii SapphIRe Library

v INNOV-X Library

vii Niton Library

x Niton XLt 898 Library

xi Glossary

xxi Category Index

xxiii Product Index Don’t miss our list of consumables on the last page of the catalog.

Page 8: Visual Inspection

RVI67

We can help you view, measure and record objects with equipment such as borescopes, videoscopes, videoprobes, robotic crawlers and thermal cameras, plus video and still cameras. Our equipment utilizes the latest technology and is available in a wide selection of image formats and technical standards.

We offer camera systems that meet your inspection requirements, allowing you to view previously inaccessible areas while enabling jobs to be carried out without putting your personnel at risk.

REMOTE VISUAL INSPECTION

Page 9: Visual Inspection

800-242-3910

RVI 68

Olympus FX Videoscope • Choice of 4mm or 6mm diameter

(2.0/3.5/7.5/12.0/18M) probes• Interchangeable insertion probes• TrueFeel™ scope articulation• Ideal for inspection and maintenance of aircraft

engines, power generating facilities, and plant and building piping systems

• Detachable, 5.6”, high-resolution, color LCD monitor

• Master control unit and hand held remote control joystick provides precise control over motorized articulation of the insertion tube tip

Articulation Angle Adjustable Gain Control Scalar Measurement Stereo Measurement Insertion Tube

150° 5 step adjustable gain control with exclusive WiDER brightness level balancing technology Distance between two points based on a known measurement in the same image plane Distance; Point to Line; Depth; Area/Lines; Profile 11.5’ (3.5m) length / 0.16” (4mm) diameter (other sizes available upon request)

VIDEOPROBES

Olympus FX Videoscope

IPLEX MX and IPLEX II Advanced

Olympus IPLEX Videoscopes • IPLEX Industrial Videoscope• IPLEX II Advanced Videoscope• IPLEX MX Industrial Videoscope• IPLEX SX Stereo Measurement The IPLEX videoscope systems are ideal for use in industrial inspections and maintenance of plant and building piping systems, aircraft engines, power generating facilities. The IPLEX SX Stereo Measurement system is built to meet the specific requirements of gas videoscope turbine inspections.

IPLEX INDUSTRIAL 4mm 6mm IPLEX II ADVANCED IPLEX MX INDUSTRIAL IPLEX SX STEREO MEASUREMENT

Scope Dimensions Articulation Range 3.5m 120° 3.5m, 7.5m, 9.6m 150° 9.6m x 6mm diameter 150° 3m 120° 19m x 6mm diameter 70°

Page 10: Visual Inspection

www.ashtead-technology.com

RVI69

Fluke Ti25 and Fluke Ti45FT/HT

Fluke and IR Insight Thermal Cameras • Fluke Ti45FT-20• Fluke Ti45FT/HT High Temperature Flexcam• Fluke Ti25 and TiR1• IR Insight Portable Thermal Imager Digital

Inspection System Our collection of thermal cameras from Fluke and IR Insight are perfect for applications in industrial roofing, electrical/mechanical inspection, insulation building envelope inspection, process monitoring/quality control and moisture (mold) detection. These instruments will help you perform quick and accurate scans to pinpoint problem areas of excessive or low temperature.

FLUKE Ti45FT-20 FLUKE Ti45FT/HT FLUKE Ti25 and TiR1 IR INSIGHT

Captures both visual and thermal image Temperatures from 4 to 1112°F in three ranges High temperature maximum: 2192°F 2GB memory card will store 1200 fully radiometric (.is2) IR and linked visual images each Capture and transfer up to 150 high-quality digital images to PC

THERMAL CAMERAS

With the PRP you get to use our equipment continuously as if it were your own, but we coordinate the yearly maintenance schedules, calibration and repairs to ensure that you always have working equipment when and where you need it.

THE PERPETUAL RENTAL PROGRAM

Call Ashtead Technology now, before you buy!

800-242-3910

• 24/7 Technical Support• Access to our nationwide inventory to support

fluctuating project demands• Ashtead Technology incurs annual certification

costs and responsibilities• Flat monthly rate means you can quote projects

based on a fixed equipment cost

Page 11: Visual Inspection

800-242-3910

RVI 70

Inuktun Versatrax 150 Parallel Crawler System The Versatrax 150 is a modular, long range (1,500ft / 450m) internal pipe inspection system capable of operation within a variety of pipe sizes. The in-line chassis system is designed for operation in pipe with a minimum internal diameter of 6in / 150mm up to 12in / 300mm.

In the parallel configuration, the crawler is steerable and can operate in 12in / 300mm and larger pipe. The standard Spectrum 90 camera provides a high quality video image with pan, tilt and zoom capability

All Versatrax units are configurable for round pipe or flat surface operation. The vehicles are adjustable for a range of pipe diameters.

TETHER CABLE

MINIMUM PIPE DIAMETER

CAMERA

SPEED

DEPTH RATING

500’ or 1500’ (extra charge)

6” inline or 12” parallel

40:1 (10x optical, 4x digital) zoom, remote focus, pan tilt, color rear auxiliary

Up to 30ft / 9m per minute

100ft / 30m

PIPE INSPECTION CAMERAS/TRACTORS

Inuktun Versatrax Parallel Crawler and Spectrum 150™ Camera System

Page 12: Visual Inspection

www.ashtead-technology.com

RVI71 PIPE INSPECTION CAMERAS / TRACTORS

Spectrum 90 Camera and Spectrum 150™ Camera System

Inuktun Inspection Systems • Spectrum 90 Camera• Spectrum 150™ Camera System The Inuktun systems are ideal for a wide range of tank, pipe and vessel inspection applications. Each of these instruments have a depth rating of 100’/30m and offer 360° views.

SPECTRUM 90 CAMERA SPECTRUM 150™ CAMERA SYSTEM

Diameter: 3.5” Length: 9.78” plus connector Camera: Color, 1.5 lux sensitivity Control System: 19” rack mount or portable pelican case, variable speed, joystick pan & tilt control, micro processor controlled functions and features Camera: 36x optical, 12x digital zoom, manual or auto focus, 1.4 lux sensitivity

ROVVER 125 Manual Portable Zoom System

ROVVER 125 Manual Portable Zoom System

Dimensions Camera Type Lens Field of View Zoom Waterproofing

12” (305mm) x 4.75” (121mm) x 3.75” (95mm) 0.5” color CCD camera, 1 lux sensitivity 68° x 90° x 100° Optional 40:1 (10X optical; 4X digital) Crawler/Camera: IP68 Reel: IP63

• Ideal for versatile sewer and environmental inspection and access into restricted pipe, large offsets, and protruding pipe taps

• Small profile allows for long runs and panning/tilting in 6 to 36” diameter pipe

• Rack-mount control unit integrates into existing vehicle• Quick-disconnect allows for easy use and time savings• Handheld pendant for control of lighting, focus, speed,

pan/tilt, zoom and steering• Includes RM200 manual cable reel complete with 150m

of cable• Standard inclinometer• Rents with a DVD recorder

Page 13: Visual Inspection

800-242-3910

RVI 72PIPE INSPECTION CAMERAS / TRACTORS

Rigid Mini-Seesnake

Rigid Mini-SeeSnake • Combines portability with a rugged camera used to

inspect lines up to 200’• 100% hardened stainless steel camera head for

increased durability • Push cable and smaller camera head to push farther

through tighter spots. Inspects 1¼”-6” lines: – 1¼” 90s (black and white only) – 2” P-Traps

• Rugged, high-intensity lights for improved visibility • Flexible transmitter makes locating easier• Ideal instruments for when portability and

maneuverability are crucial such as multi-story buildings, rooftops and confined areas

Camera Head Accessories

Color LCD Monitor + DVD SeeSnake Flexible Sonde 200’ SeeSnake Push Cable Assembly SeeSnake Cable CountIR Color Mini Ball Guides, Pkg of 6

Pearpoint P372 Flexiprobe, Pearpoint P374 Intrinsically Safe MiniCam and Insight Vision 1100

Video Inspection • Pearpoint P331 / P332• Pearpoint P372 Flexiprobe• Pearpoint P373 MiniCam• Pearpoint P374 Intrinsically Safe MiniCam• Pearpoint P571 / Intrinsically Safe• Insight Vision 1100 Sewer Video Inspection System Our video inspection systems from Pearpoint and Insight are an ideal choice for inspectors providing residential, commercial or basic municipal inspection services such as viewing the internal condition of pipes, conduits and similar passages of varying size. Inspection cameras rent with a DVD recorder.The Pearpoint P374 is intrinsically safe.

PEARPOINT P332 PEARPOINT P372 PEARPOINT P373 and P374 PEARPOINT P571 INSIGHT VISION 1100

Push Rod Length Camera Diameter 200’ or 400’ 2.5 to 8” pipe ø or 1” (1.25 to 4” pipe ø) 200’ 1.89” 200’ 0.94” (1 to 4” pipe ø)

200’ 0.94” 200’ or 300’ 1.5”

Page 14: Visual Inspection

www.ashtead-technology.com

RVI73

Danatronics VIS 340

The VIS 340 offers unprecedented features including on-board memory card for saving video images and reporting capabilities. Available in 100 foot pushrod, waterproof ccd camera with Pan and Tilt capability, the cameras are ideal for the most challenging applications. The VIS340 is a 100 foot system. The VIS 340 features a 7” high contrast display, tactile feedback keypad for adjusting the camera head, digital on-screen encoder to show camera distance, powerful LED light source with automatic gain control, video output for recording all in a lightweight package.

Length Diameter

Camera Head Diameter Field of view Zoom Waterproofing

Recording

100’ 0.26“ 1.5“

120° Optional 40:1 (10X optical; 4X digital) Up to 100’

2 GB SD-Card (2,5 h recording)

PIPE INSPECTION CAMERAS / TRACTORS

Danatronics VIS 340

Wohler VIS 220 The VIS 220 innovative service camera system provides everything you need for inspection of piping from 1 1/4” to 6” in diameter. The 1” mini camera head delivers a crystal clear image of any internal piping problem and is waterproof to a depth of 100 ft. Dual 12 V rechargeable batteries allow for over 3 hours of cordless operation. The new TFT monitor provides brilliant picture quality which can be documented to a VCR or other electronic devices through its RCA video output.

Video Out 1” Mini Color Camera Head Sensor type Sensitivity Lens System Field of View Protection Distance Indicated Push Rod

Standard Video Signal 1/3” color CMOS 3 Lux f=2.5mm, F=2.0 120° Waterproof up to 100’ water depth Length 100’

Wohler VIS220

Page 15: Visual Inspection

800-242-3910

RVI 74

Olympus i-Speed High Speed Video Camera

Olympus i-Speed High Speed Video Camera • Provides a slow motion view of high-speed events• Features include: Olympus custom-designed CMOS sensor, upgradeable memory options, exclusive Olympus

Camera Display Unit (CDU), Internal PCMCIA slot for compact flash storage, Ethernet link for image download and PC control, various trigger modes including Record on Command and Burst Record on Command

• Built in measurement, storage and editing capability through CDU, no PC required• Continuous streaming live video from four outputs• Synchronization to multiple cameras Real time zoom and pan• Exclusive Olympus back focus control Integral electronic shutter to five microseconds and exclusive Olympus

i-SPEED software

i-Speed Controller Display Unit Standard Internal Memory Ethernet Signal Recording Speeds

Display: 8.4” LCD daylight viewing Input voltage: 12V ±10% Power /consumption: 8W maximum Also available: B/W LCD 2GB or 4GB SVGA (800 x 600), 60Hz Up to 33,000fps 800 x 600 resolution at 1000fps

HIGH SPEED VIDEO CAMERAS & RVI ACCESSORIES

Length Diameter

Camera Head Diameter Field of view Zoom Waterproofing

Recording

100’ 0.26“ 1.5“

120° Optional 40:1 (10X optical; 4X digital) Up to 100’

2 GB SD-Card (2,5 h recording)

Page 16: Visual Inspection

800 242 3910 / www.ashtead-technology.com

ISO 9001 Certified

Did you know...Ashtead Technology stocks a full line of consumables?

For more information, please scan: