visit our website RF-Capacitance Level... · capacitance and vessel are proportional increased....
Transcript of visit our website RF-Capacitance Level... · capacitance and vessel are proportional increased....
RF-Capacitance Level Transmitter
visit our website
PRODUCT INTRODUCTION
EB3999 EB2600
PRINCIPLE
RF-Capacitance utilizes the capacitance formed between the sensing probe and the reference probe or the metal vessel wall to calculate the level of the liquid/medium inside the vessel according to the capacitance theory that the capacitance and vessel are proportional increased.
When sensing probe and detected media are fixed, media dielectric constant (Kmedia) is normally bigger than air (Kair=1). Capacitnce for media (Cmedia) increases when liquid/ power/ solid level raise. EB prouduct detects media level by calculating capacitance inside the tank.
level Transmitter
FEATURES
EB Series
4~20mA 2 wire Loop power
Low consumption of power (22mA Max)
High accuracy of linearity (< 1% FS)
Temperature compensation, low temperature
effect( 0.02% FS / C)
Easy calibration (Any 2 points for calibration)
Wide measuring range for capacitance
(0~5000pF)No blind distance, ideal for different tanks.
Suitable for high temperature, high pressure
and corrosive environment.
EB3 Series
EB2600 Series
2999
1
1
1 A
1
A B
1
1
1
1
999
1
1
1
1 Photocoupler x 2
1
1
1 Display range-1999~9999
1 Settings can be done directly with 3 buttons on
the housing.1 270B reversible direction for display.
1 Easy wiring with quick connector.
1 Easy installation with small product size.
1 Inclined plane desige, LCD display is easy to
be read.
Dual protection prevents fog from damaging PCB.
LCD indication is easy for observation from top.
Power Supply: 12~36Vdc
Protective housing with high stability prevents
from any damages during transportation, installation and operation.
Measuring accuracy is not affected by
temperature and pressure.
Recorder
PB SeriesBargraphicDisplay Panel Meter
PM SeriesDigital Display Panel Meter
EB2999
1
Level
4~20mA
STANDARD TYPE
EB2100 Wire Probe EB2101 Hi-Temp Wire Probe EB2200 Rod Probe
SUS304
CERAMIC
-40~80BC
2000Kgf
4 ~20mA( )two wire
0~5000pF
2 3"x5kg/cm flange or 1"PT screw
Approx. 3.7kg(1M)
240kg/cm
12~36Vdc
SUS304
2000Kgf
4 ~20mA( )two wire
0~5000pF
Approx. 4.2kg(1M)
240kg/cm
2 3"x5kg/cm flange or 1"PT screw
12~36Vdc
-40~80BC
SUS304/316
4 ~20mA( )two wire
0~5000pF
2 1"x5kg/cm flange or 1"PT screw
Approx. 2.3kg(1M)
240kg/cm
12~36Vdc
-40~80BC
Measuring Range
Probe Material
Weight Material
Tensile Strength
Operation Voltage
Output Current
Accuracy
Weight
Operating Pressure
Operating Temperature
AmbientTemperature
Connection
Model No.
Dimensions
(unit:mm)
CERAMIC
A1%FS (25BC)A1%FS (25BC) A1%FS (25BC)
108
f113
21"x5kg/cmf120
1"PT
25
L=
4M (
Max
.)
1/2"NPT
f12.7
PP
108
f113
25
L=
50M
(M
ax.)
1/2"NPT
PP
SUS304
23"x5kg/cm
f120
1"PT
IP65 IP65 IP65Housing IP Degree
2
108
f113
L=
50M
(M
ax.)
1/2"NPT
PEEK
SUS304
61f88
25 23"x5kg/cm
f120
1"PT
-40~100BC -40~200BC -40~100BC
Suitable for big tankMedia : non-conductive material low moisture material
Suitable for big tankMedia : non-conductive material low moisture material
Suitable for middle/ small tankMedia : non-conductive material low moisture material
STANDARD TYPE
EB2201 Hi-Temp Rod Probe
4 ~20mA( )two wire
IP65
Approx. 2.8kg(1M)
240kg/cm
2 1"x5kg/cm flange or 1"PT screw
SUS304/316
-40~80BC
EB2300 Wire Probe
SUS304
4 ~20mA( )two wire
IP65
2 1"x5kg/cm flange or 1"PT screw
Approx. 2.3kg(1M)
240kg/cm
SUS304
-40~80BC
EB2301 Hi-Temp Wire Probe
SUS304
4 ~20mA( )two wire
IP65
Approx. 2.8kg(1M)
240kg/cm
SUS304
2 1"x5kg/cm flange or 1"PT screw
-40~80BC
2000Kgf
0~5000pF
12~36Vdc
2000Kgf
0~5000pF
12~36Vdc
0~5000pF
12~36Vdc
Dimensions
(unit:mm)
A1%FS (25BC)A1%FS (25BC) A1%FS (25BC)
Measuring Range
Probe Material
Weight Material
Tensile Strength
Operation Voltage
Output Current
Accuracy
Weight
Operating Pressure
Operating Temperature
AmbientTemperature
Connection
Model No.
Housing IP Degree
3
108
f113
21"x5kg/cm
f120
1"PT
61
L=
50M
(M
ax.)
1/2"NPT
f88
PEEK
f28
M5100
SUS304
25
SUS304
108
f113
21"x5kg/cmf120
1"PT
25
L=
50M
(M
ax.)
1/2"NPT
f28
PP
SUS304
M5100
SUS304
108
f113
21"x5kg/cm
f120
1"PT
61
L=
4M (
Max
.)1/2"NPT
f12.7
PEEK
f88
25
-40~200BC -40~100BC -40~200BC
Suitable for non-conductive/ low moisture material and big tank.(weight can not be fixed at the bottom of tank)
Suitable for non-conductive/ low moisture material and big tank.(weight can not be fixed at the bottom of tank)
Suitable for middle/ small tankMedia : non-conductive material low moisture material
STANDARD TYPE
EB2400 --- PVDF CoatingEB2420 --- PP CoatingEB2430 --- FEP Coating
EB2400/20/30 Anti-Corrosion EB2431
SUS304+Coating
4 ~20mA( )two wire
Approx. 2.3kg(1M)
240kg/cm
-40~80BC
4 ~20mA( )two wire
Approx. 2.3kg(1M)
240kg/cm
SUS304+Coating
-40~80BC
0~5000pF
12~36Vdc
0~5000pF
12~36Vdc
Dimensions
(unit:mm)
EB2520 --- PP CoatingEB2530 --- FEP Coating
EB2520/30 Anti-CorrosionWire Probe
4 ~20mA( )two wire
Approx. 2.3kg(1M)
240kg/cm
1200Kgf
SUS304+PTFE
SUS304+Coating
-40~80BC
0~5000pF
12~36Vdc
Hi-temp Anti-Corrosion
A1%FS (25BC)A1%FS (25BC) A1%FS (25BC)
Measuring Range
Probe Material
Weight Material
Tensile Strength
Operation Voltage
Output Current
Accuracy
Weight
Operating Pressure
Operating Temperature
AmbientTemperature
Connection
Model No.
108
f113
21"x5kg/cm
f120
1"PT
25
L=
50M
(M
ax.)
1/2"NPT
f28
PP
M8150
PTFE
108
f113
21"x5kg/cmf120
L=
4M (
Max
.)1/2"NPT
108
f113
61
1/2"NPT
f88
21"x5kg/cmf120
L=
4M (
Max
.)
IP65 IP65 IP65Housing IP Degree
2 1"x5kg/cm flange 2 1"x5kg/cm flange 2 1"x5kg/cm flange or 1"PT screw
4
-40~200BC-40~100BC -40~100BC
Suitable for conductive/ corrosive material and middle-size tank.
Suitable for conductive/ corrosive material and middle-size tank.
Suitable for conductive/ corrosive material and middle-size tank.(weight can not be fixed at the bottom of tank)
STANDARD TYPE
Dimensions
(unit:mm)
4 ~20mA( )two wire
Approx. 2.3kg(1M)
240kg/cm
2000Kgf
SUS304+PTFE
SUS304+Coating
-40~100BC
-40~200BC
0~5000pF
12~36Vdc
EB2531 Anti-CorrosionHi-Temp Wire Probe
A1%FS (25BC)
Measuring Range
Probe Material
Weight Material
Tensile Strength
Operation Voltage
Output Current
Accuracy
Weight
Operating Pressure
Operating Temperature
AmbientTemperature
Connection
Model No.
108
f113
21"x5kg/cm
f120
1"PT
61
L=
50M
(M
ax.)
1/2"NPT
f88
PEEK
f28
M5100
25
PTFE
IP65Housing IP Degree
2 1"x5kg/cm flange or 1"PT screw
5
Suitable for conductive/ corrosive material and middle-size tank.(weight can not be fixed at the bottom of tank)
EB3400 --- PVDF CoatingEB3420 --- PP CoatingEB3430 --- FEP Coating
EB3300 Wire ProbeModel No.
Dimensions
(unit:mm)
EB3200 Rod Probe
SUS304Probe material SUS304/316
4 ~20mA( )two wireOutput current 4 ~20mA( )two wire
0~5000pFMeasuring Range 0~5000pF
Accuracy
IP65Housing IP Degree IP65
Connection2 1"x5kg/cm flange or 1"PT screw
Approx. 2.3kg(1M)Weight Approx. 2.3kg(1M)
240kg/cmOperating pressure
240kg/cm
SUS304Weight material
2000KgfTensile strength
12~36VdcOperation voltage 12~36Vdc
-40~80BCAmbientTemperature -40~80BC
Operating Temperature
22mA
3.5mA
3.5、22mA
3.8~21.5mAOutput Linear Range
Output Latch
Lower Limit
Upper Limit 22mA
3.5mA
3.5、22mA
3.8~21.5mA
STANDARD TYPE (MULTI-FUNCTION)
A1%FS (25BC)A1%FS (25BC)
21"x5kg/cm
f120
1"PT
25
L=
50M
(M
ax.)
f28
PP
SUS304
M5100
SUS304
f84
105
35
1/2"PF
21"x5kg/cm
f120
1"PT
25
L=
4M (
Max
.)
f12.7
PP
f84
105
35
1/2"PF
21"x5kg/cmf120
L=
4M (
Max
.)
f84
105
35
1/2"PF
EB3400/20/30 Anti-Corrosion
0~5000pF
SUS304+Coating
12~36Vdc
4 ~20mA(two wire)
Approx. 2.3kg(1M)
240kg/cm
IP65
-40~80BC
2 1"x5kg/cm flange
22mA
3.5mA
3.5、22mA
3.8~21.5mA
A1%FS (25BC)
2 1"x5kg/cm flange or 1"PT screw
6
-40~100BC -40~100BC-40~100BC
Suitable for non-conductive material and middle-size tank.
Suitable for non-conductive material and big tank.
Suitable for conductive/ corrosive material and middle-size tank.
12~36Vdc
4~20mA( )two wire
-40LC~100LC
0~85%
A LC0.02% FS. /
-1999 ~ 9999
IP 65
-40LC~80LC
尺寸圖
(單位:mm)
EB2600 Compact Ramp
0~1000pF
A1%FS (25BC)
Measuring Range
Probe material
Weight material
Tensile strength
Operation voltage
Output current
Accuracy
Weight
Operating pressure
Housing IP Degree
Operating Temperature
AmbientTemperature
Connection
Model No.
Dimensions
(unit:mm)
(Vs- 12) x 50
Vs:Power Voltage
Environment Temperature
Output current
Accuracy
Load Resistance
Operation Temperature
LCD Display
Housing IP Degree
Temperature Coefficient
Model No.
Power supply
Measuring range
Environment Humidity
Dimensions
(unit:mm)
22mA
3.5mA
3.5、22mA
3.8~21.5mAOutput Linear Range
Output Latch
Lower Limit
Upper Limit
Output Linear Range
Output Latch
Lower Limit
Upper Limit
STANDARD TYPE (MULTI-FUNCTION) / COMPACT RAMP
EB3520 --- PP CoatingEB3530 --- FEP Coating
EB3520/30 Anti-CorrosionWire Probe
SUS304+Coating
4 ~20mA( )two wire
0~5000pF
IP65
Approx. 2.3kg(1M)
215kg/cm
SUS304+PTFE
2000Kgf
12~36Vdc
-40~80BC
22mA
3.5mA
3.5、22mA
3.8~21.5mA
A1%FS (25BC)
21"x5kg/cmf120
1"PT
25
L=
50M
(M
ax.)
f28
PP
M8150
PTFE
f84
105
35
1/2"PF
2 1"x5kg/cm flange or 1"PT screw
7
-40~100BC
Suitable for conductive/ corrosive material and middle-size tank.
Suitable for conductive/ corrosive material and small tank.
f38.1
130
HEX38
1/2"PT22
49.5
L=1M(Max.)
f8
M12
CALIBRATION & SETUP
8
Display Value
2sec
Setting mode
G:
Q:
H:
R:
I:
S:
A:
K:
U:
B:
L:
V:
C:
M:
W:
N:
D:
X:
O:
E:
Y:
T:
J: F:
P:
Z:
ON, OFF
1~60sec
OFF
1
Output latch
Reflash time
0~3
-1999~9999
-1999~9999
-1999~9999
-1999~9999
-1999~9999
-1999~9999
0~99
1
100.0
0
100.0
0
50.00
0
50.00
0
0
-1999~9999
-1999~9999
0~99
SAVE,RSET BACK
SAVE,RSET BACK
Lo,MID,HI
SAVE
SAVE
LO
/
/
EB3 Series
Capacity Value
High point Capacity Value
Low point Capacity Value
4mA fine turn
20mA fine turn
Load default
0~9999
0~9999 5056
0~9999 54
-1999~9999 0
-1999~9999 0
EB2 Series EB2600 Series
Alarm mode Control mode System mode
Main Menu
Sub-Menu
Range Default Description
Decimal point setting
20mA corresponding display value
4mA corresponding display value
Corresponding calibration value for high point (Hipt).Corresponding Calibration Value for low point (Lopt). Process High AlarmAlarm position
Hysteresis Alarm
Alarm delay time(sec)
Process Low AlarmAlarm position
Hysteresis Alarm
Alarm delay time(sec)
Software Filter
Memory for max & mini value during operation.SAVE:Save value into EepromREST:Clean present value and memoryBACK:Go back to sub-menu
Alarm direction :normal open :normal close
Alarm direction :normal open :normal close
ORDER INFORMATION
32 --- Rod Type33 --- Wire Probe Type34 --- Anti-Corrosion (3400: PVDF 3420: PP 3430: FEP)35 --- Anti-Corrosion with Wire-probe weight (3520: PP 3530: FEP)21 --- Wire Probe Type21 --- Hi-Temp Wire Probe Type22 --- Rod Type22 --- Hi-Temp Rod Probe Type23 --- Wire Probe Type23 --- Hi-Temp Wire ProbeType24 --- Anti-Corrosion (2400: PVDF 2420: PP 2430: FEP)25 --- Anti-Corrosion with Wire-probe weight (2520: PP 2530: FEP)26 --- Compact Ramp
Connecting
* Tolerance of the total product length isK5mm * Characteristics, specifications and dimensions are subject to change without notice. * Please contact your nearest distributing office for further informations.
EB 2 1 6 0 H M 5 0 0 0
Material
C --- 3/4" (EB2600)D --- 1"E --- 1-1/2"F --- 2"G --- 2-1/2"H --- 3"I --- 4"J --- 5"K --- 6"S --- others
B --- 1/2" (EB2600) 2M --- 5kg/cm2N --- 10kg/cm
O --- 150 LbsP --- 300 LbsQ --- PTR --- PF(G)T --- BSPU --- NPTV --- GASS --- others
Dimension Specification
Probe Length (unit: mm)
3: Multi-function Type 2: Standard Type
Metal Probe:Plastic Coated Probe:
0:SUS304 6: SUS316 0:PVDF 2: PP 3: FEP
0: (max.100LC)1: Hi-Temp Type (max.200LC)
Standard
0500: below 500mm
1000: 501~1000mm
1500: 1001~1500mm 500mm per Unit
Use English letter as first code for probe length over 10m.A150 represents 15m, A200 represents 20m
Temperature Resistance
9
EXPLOSION PROOF TYPE
EB1710 Wire Probe EB1711 Hi-Temp Wire Probe EB1720 Rod Probe
SUS304
CERAMIC
-20~70BC
-40~80BC
2000Kgf
4 ~20mA( )two wire
0~5000pF
IP65
2 3"x5kg/cm flange or 1-1/2"PT screw
Approx. 3.7kg(1M)
12~36Vdc
SUS304
2000Kgf
4 ~20mA( )two wire
0~5000pF
IP65
Approx. 4.2kg(1M)
2 3"x5kg/cm flange or 1-1/2"PT screw
12~36Vdc
-20~70BC
-40~200BC
SUS304/316
4 ~20mA( )two wire
0~5000pF
IP65
2 1-1/2"x5kg/cm flange or 1-1/2"PT screw
Approx. 2.3kg(1M)
12~36Vdc
-20~70BC
-40~80BC
Measuring Range
Probe material
Weight material
Tensile strength
Operation voltage
Output current
Accuracy
Weight
Operating pressure
Housing IP Degree
Operating Temperature
AmbientTemperature
Connection
Model No.
Dimensions
(unit:mm)
CERAMIC
PTB PROOF No.09 ATEX 1004 II 2G Ex d IIB T6~T3 GbII 2D Ex tb IIIC T80BC~T190BCDb IP65
A1%FS (25BC)A1%FS (25BC) A1%FS (25BC)
f95
f12.7
4-f15
L=
4M (
Max
.)
21-1/2"x5kg/cmf120
1-1/2"PT
f21
108
f113
1/2"NPT
25
10
ceramic
f1454-f19
L=
50M
(M
ax.)
23"x5kg/cmf180
1-1/2"PT45
f20
125
f113
1/2"NPT
25
4-f19
L=
50M
(M
ax.)
23"x5kg/cm
f145
f180
50f88
1-1/2"PT42
f20
108
f113
1/2"NPT
25
ceramic
240kg/cm240kg/cm 240kg/cm
Suitable for non-conductive material and big tank.
Suitable for non-conductive material and big tank.
Suitable for non-conductive material and middle-size tank.
EXPLOSION PROOF TYPE
EB1721 Hi-Temp Rod Probe
4 ~20mA( )two wire
IP65
Approx. 2.8kg(1M)
2 1-1/2"x5kg/cm flange
or 1-1/2"PT screw
SUS304/316
-20~70BC
-40~200BC
EB1730 Wire Probe
SUS304
4 ~20mA( )two wire
IP65
Approx. 2.3kg(1M)
SUS304
-20~70BC
-40~80BC
EB1731 Hi-Temp Wire Probe
SUS304
4 ~20mA( )two wire
IP65
Approx. 2.8kg(1M)
SUS304
-20~70BC
-40~200BC
2000Kgf
0~5000pF
12~36Vdc
2000Kgf
0~5000pF
12~36Vdc
0~5000pF
12~36Vdc
Measuring Range
Probe material
Weight material
Tensile strength
Operation voltage
Output current
Accuracy
Weight
Operating pressure
Housing IP Degree
Operating Temperature
AmbientTemperature
Connection
Model No.
Dimensions
(unit:mm)
2 2"x5kg/cm flange
or 1-1/2"PT screw
2 2"x5kg/cm flange
or 1-1/2"PT screw
A1%FS (25BC)A1%FS (25BC) A1%FS (25BC)
f95
f12.7
4-f15
L=
4M (
Max
.)
21-1/2"x5kg/cmf120
f88
f21
1-1/2"PT
108
f113
1/2"NPT
50
25
f1454-f19
22"x5kg/cmf180
SUS304150
L=
50M
(M
ax.)
f38
f9.5 wire
108
f113
1/2"NPT
f20
42
25
1-1/2"PTf88
50
108
f113
1/2"NPT
f1454-f19
22"x5kg/cmf180
SUS304150
L=
50M
(M
ax.)
f38
f9.5 wire
f20
42
25
1-1/2"PT
11
240kg/cm240kg/cm 240kg/cm
Suitable for non-conductive material and big tank.
Suitable for non-conductive material and middle-size tank.
Suitable for non-conductive material and big tank.
PTB PROOF No.09 ATEX 1004 II 2G Ex d IIB T6~T3 GbII 2D Ex tb IIIC T80BC~T190BCDb IP65
EXPLOSION PROOF TYPE
EB1740 --- PVDF CoatingEB1742 --- PP CoatingEB1743 --- FEP Coating
EB1740/42/43 Anti-Corrosion
SUS304+Coating
4 ~20mA( )two wire
IP65
Approx. 2.3kg(1M)
-20~70BC
0~5000pF
12~36Vdc
Measuring Range
Probe material
Weight material
Tensile strength
Operation voltage
Output current
Accuracy
Weight
Operating pressure
Housing IP Degree
Operating Temperature
AmbientTemperature
Connection
Model No.
Dimensions
(unit:mm)
EB1752 --- PP CoatingEB1753 --- FEP Coating
EB1752/53 Anti-CorrosionWire Probe
4 ~20mA( )two wire
A1%FS (25BC)
IP65
Approx. 2.3kg(1M)
2000Kgf
SUS304+PTFE
SUS304+Coating
-20~70BC
0~5000pF
12~36Vdc
2 1-1/2"x5kg/cm flange
or 1-1/2"PT screw
2 2"x5kg/cm flange
or 1-1/2"PT screw
A1%FS (25BC)
f95
4-f15
21-1/2"x5kg/cmf120
1-1/2"PT25
f16
f12
L=
4M (
Max
.)108
f113
1/2"NPT
150
PTFE
f38
f145
f8 wire
4-f19
L=
50M
(M
ax.)
22"x5kg/cmf180
1-1/2"PT42
f20
125
f113
1/2"NPT
25
f5
12
240kg/cm240kg/cm
-40~80BC -40~80BC
Suitable for conductive/ corrosive material and middle-size tank.
Suitable for conductive/ corrosive material and big tank.(weight can not be fixed at the bottom of tank)
PTB PROOF No.09 ATEX 1004 II 2G Ex d IIB T6~T3 GbII 2D Ex tb IIIC T80BC~T190BCDb IP65
1710 --- Wire Probe Type
1711 --- Hi-Temp Wire Probe Type
1720 --- Rod Type
1721 --- Hi-Temp Rod Probe Type
1730 --- Wire Probe Type
1731 --- Hi-Temp Wire ProbeType
1749 --- Anti-Corrosion (1740: PVDF 1742: PP 1743: FEP)
1759 --- Anti-Corrosion with Wire-probe weight
(1752: PP 1753: FEP)
Connecting
* Tolerance of the total product length is 5mm
* Characteristics, specifications and dimensions are subject to change without notice. * Please contact your nearest distributing office for further informations.
K
EB 1 7 1 0 H M 5 0 0 0
E --- 1-1/2"F --- 2"G --- 2-1/2"H --- 3"I --- 4"J --- 5"K --- 6"S --- others
D --- 1" 2M --- 5kg/cm2N --- 10kg/cm
O --- 150 LbsP --- 300 LbsQ --- PTR --- PF(G)T --- BSPU --- NPTV --- GASS --- others
Dimension Specification
Probe Length (unit: mm)
0500: below 500mm
1000: 501~1000mm
1500: 1001~1500mm 500mm per Unit
Use English letter as first code for probe length over 10m.A150 represents 15m, A200 represents 20m
13
ORDER INFORMATION
Metal strap
Rod probe
Rod probe
Isolate supporter
Ceramic isolator
Cable probe
Rod probe
Agitator
Vent holeTube
Fig. 1
Fig. 2
Fig. 4Fig. 3
INSTALLATION
1. The rod probe or cable probe (depending upon which one you purchased ) should be parallel to the tank wall and be positioned as close as possible to the tank wall. Make sure the medium does not stick in between the probe and the tank wall.
2. If the tank is not electrically conductive, a metal strap should be added outside of tank wall (fig. 1) for either liquid or non-liquid medium. Or place a metal tube, usually made out of stainless steel, around the rod (fig. 2) for liquid medium. This metal tube should come with a vent hole at top of the tube to allow the medium to go up inside of the tube.
3. If the container is irregular-shaped, such as a cylindrical, and the medium is liquid with low viscosity, the rod should be placed inside a metal tube with vent hole at the top. (Fig. 2)
4. For non-conductive medium of powder or granuules in a new or empty tank, the cable probe should be fixed to the bottom of tank with ceramic isolator (EB2100 Series. If the tank is not empty, please use the EB2300 Series. (fig. 3)
5. Make sure to fix the rod probe or cable probe to the container wall with non-conductive supporting material. If an agitator is in place (see fig. 4). This will prevent the deformation of the rod probe and tangling of the cable probe around the agitator.
6. If the medium is conductive, make sure to coat the rod probe or cable probe with PVDF or PP material.
7. During the installation, the process connection should be grounded. An installation without proper grounding will not guarantee normal operation of the device later on.
8. When all electrical connections inside of a Capacitance Level Transducer housing are finished, the housing cover and the conduit opening should be sealed and tightened to prevent moisture from soaking in.
14
[SF] Paddle Flow Switch
[FC/FD] Mini Float/Magnetic Float Level Switch
[SD] Optical Level Switch
[FA/FB] Cable Float Level Switch
[FF] Side Mounting Float Switch
[SB] RF-Capacitance / Admittance Level Switch
[SE] Rotary Paddle Level Switch
[SC] Vibrating Probe Level Switch
[SC] Tuning Fork Level Switch
[LR] Loop Power Indicator
[SA] Capacitance Level Switch
[SP] Thermal Dispersion Flow Switch
[EC] Pressure Level Transmitter
[ED] Speed Monitor
[PB/PM] Microprocessor Based Bargraphic Display Scaling Meter
[BRD/AE] Valve and Controller for Dust Collector System
[EB] RF-Capacitance Level Transmitter
[FG] Magnetic Float Level Transmitter
[EG] Magnetostrictive Level Transmitter
[EA] Ultrasonic Level Transmitter
[EF] By-Pass Level Transmitter
[MEF] Mini By-Pass Level Transmitter
[BAS/BAH/BVP] Air Hammer
[BVK/BVR/BVT] Pneumatic Vibrator
[JFR] FMCW Radar Level Transmitter
[EE] Electromechanical Level Measuring System
[SRT/SRS] Conveyer Belt Misalignment Switch &
Safety Cable Pull Switch
08-EB-B0-EP, 01/17/2012
Distributor:
[FA/FB]
[PB]
[EG]
[SF]
[EF]
[JFR] [FC/FD]
[EC]
[FF]
[SA]
[EB]
[EA]
[FG]
[SP]
[SC]
[SB]
[FC/FD] [SD]
[LR]
[EB]
[SE]
[PB/PM]
[EB]
[EE] [EA]
[BAS/BAH/BVP]
[BVK/BVR/BVT]
[EB]
[SA]
[SB]
[SC]
[SC]
[SC] [JFR] [SE]
[SB]
FineTek Co., Ltd.
TEL: 886 2 2269 6789 FAX: 886 2 2268 6682Email: [email protected] http://www.fine-tek.com
Taichung Branch TEL: 886 4 2465 2820 FAX: 886 4 2463 9926Tainan Branch TEL: 886 6 289 0635 FAX: 886 6 289 4073Kaohsiung Branch TEL: 886 7 333 6968 FAX: 886 7 536 8758
Fine automation (ShangHai) Co., Ltd.No.451 DuHui Rd, MinHang District, Shanghai, China 201109TEL: 86 21 6490 7260 FAX: 86 21 6490 7276Email: [email protected]
FineTek Pte Ltd.No. 11 Kaki Bukit Road 1,#04-01 Eunos Technolink 415939, Singapore TEL: 65 6452 6340 FAX: 65 6734 1878Email: [email protected]
FineTek GmbHFrankfurter Str. 62, OG D-65428 Ruesselsehim, GermanyTEL: 49 6142 17608 0 FAX: 49 6142 17608 20Email: [email protected]
Aplus Finetek Sensor inc.355 S. Lemon Ave, Suite D, Walnut, CA 91789TEL: 1 909 598 2488 FAX : 1 909 598 3188Email: [email protected]
No.16, Tzuchiang St., Tucheng Industrial Park, New Taipei City 23678, Taiwan.