Virtual development of knitted and braidied products and braiding ... · •2015 Techtextil...
Transcript of Virtual development of knitted and braidied products and braiding ... · •2015 Techtextil...
Virtual development of knitted and
braidied products and braiding
machines with Texmind Suite
Prof. Dr. Ing. Math. Yordan Kyosev
TexMind, Mönchengladbach, Germany, www.texmind.com
Research Institute for Textile and Clothing (FTB)
Niederrhein University of Applied Sciences,
Webschulstr. 31,41065-Mönchengladbach, Germany,
e-mail: [email protected]
Outline
TexMind Company
Texmind Braider
Texmind Braiding Machine Configurator
Texmind Warp Knitting Editor
Export to FEM
2
TexMind • TexMind UG (limited liability) was founded 2011 in Mönchengladbach, Germany, as
extension of the previous 10 years free lancer activity of the founder Prof. Dr. Kyosev
• Intensive exchange and cooperation with Hochschule Niederrhein, Mönchengladach
• Team of 3 developers with large worldwide network of cooperation partners
• About 60% of our work is development of custom software for special machines and structures
• Public availble products:
• 2014 Texmind Braider launched
• 2015 Techtextil Frankfurt – Warp Knitting Editor and Braiding Configurator
• 2015 ITMA Milano, 2017 Techtextil Frankfurt, 2017 Open House Herzog
• 2018 Int. Week of Narrow and Smart Textiles – First worldwide version for Software for design of Braiding Machines with Computer Controlled Switches and arbitrary arrangement of the horn gears demonstrated
3
Braider
• 3D CAD for tubular and flat braided products
4
Braider • Different pattern and diameters possible
5
Braider
• Any floating length
6
Braider
• Any number of yarns/wires in a group
7
Braider
• Any floating length
8
Falt Braids
9
Combination of different yarns with and widthout twist
10
Force Elongation Diagram
• TexMind Braider calculates specific points of the force elengation diagram of tubular braids
11
TexMind Braiding Machine Configurator
12
Configurator
• Design custom braiding machine – placing the gears with the mouse on the proper place
13
Configurator
• Place carriers
• And simulate their motion
14
NEW ! • Program the switch changes during the motion and speed up the development of complex profiles
15
NEW ! • Program the switch changes during the motion and speed up the development of complex profiles
16
Check automatically for carrier collision
Simple Bifurcation
17
Bifurcation of tubular braids
18
Pattern change
19
Software: TexMind Computer Controlled Braiding Machine Configurator
Pattern Change
Lace Type interlacements
21
Check more complex profiles
22
Warp Knitting Pattern Editor
23
Coding for different machines and types
• 1 - 0 / 1 – 2 //
Machine Left Machine Right
Coding for different machines and times
• 1 - 0 / 1 – 2 // gap Number
• 2 – 0 / 2 – 4 // 2x gap Number
Machine Left Machine Right
Single and double needle bed machines
Use preselected pattern
Short Introduction in TexMind Warp Knitting Pattern EDITOR 27
1. Select guide
by clicking on its label
2. After that select pattern
All basic lappings available
Short Introduction in TexMind Warp Knitting Pattern EDITOR 28
Threading
Short Introduction in TexMind Warp Knitting Pattern EDITOR 29
First - Select the yarn type for the threading (first one is empty needle)
Then click the cells of the guides where this yarn should be inserted
Weight and Run-In Calculation
Short Introduction in TexMind Warp Knitting Pattern EDITOR 30
2 1
Enter one of the values for take-off or cources per length and press the tick.
Under Development – next generation 3D software
Short Introduction in TexMind Warp Knitting Pattern EDITOR 31
Short Introduction in TexMind Warp Knitting Pattern EDITOR 32
From Geometry to Mechanics
Export for FEM for all programms
36
Export for FEM calculations
37
Export to FEM
• Composite Beam Homogenisation with Abaqus
• Common Work with J.Hello
38
Relaxation with VTMS
• Export to VTMS Software and relaxation
39
Bullet penetration with HyperWorks (here weft knitted structure) • Optimisatino
of knitted structure for bullet protection,
• Geometry generated with TexMind Software (M.Sc. Thesis K.Freier)
40
Wire Based Composites
• Cooperation with H. Cebulla, TU Chemnitz
41
Custom software
• We develop customized and complete custom software for special textile machines and design of their products.
42
Thank you for your attention www.texmind.com
43