VINYL PIPES U-PVC HI-PVC & FITTINGS JIS SERIES. ASAHI AV VINYL PIPES – U-PVC (HI-PVC) VP and VM...

VINYL PIPES

U-PVC

HI-PVC

& FITTINGS

JIS SERIES

ASAHI AV VINYL PIPES – U-PVC (HI-PVC)

VP and VM PIPES

Nominal Size Identification

Outer diameter ThicknessApprox.

Innerdiameter

LengthCalculated

Weight(kg/m)

HI-PVCVP pipeBasic

Dimension

Max. Min.Tolerance

( )

AverageTolerance

( )

Min.Dimension

Tolerance

( )

13 VP 13 18 0.2 0.2 2.2 0.6 13 4,000 0.174 Available

16 VP 16 22 0.2 0.2 2.7 0.6 16 4,000 0.256 Available

20 VP 20 26 0.2 0.2 2.7 0.6 20 4,000 0.310 Available

25 VP 25 32 0.2 0.2 3.1 0.8 25 4,000 0.448 Available

30 VP 30 38 0.3 0.2 3.1 0.8 31 4,000 0.542 Available

40 VP 40 48 0.3 0.2 3.6 0.8 40 4,000 0.791 Available

50 VP 50 60 0.4 0.2 4.1 0.8 51 4,000 1.122 Available

65 VP 65 76 0.5 0.3 4.1 0.8 67 4,000 1.445 Available

75 VP 75 89 0.5 0.3 5.5 0.8 77 4,000 2.202 Available

100 VP 100 114 0.6 0.4 6.6 1.0 100 4,000 3.409 Available

125 VP 125 140 0.8 0.5 7.0 1.0 125 4,000 4.464 Available

150 VP 150 165 1.0 0.5 8.9 1.4 146 4,000 6.701 Available

200 VP 200 216 1.3 0.7 10.3 1.4 194 4,000 10.13 Available

250 VP 250 267 1.6 0.9 12.7 1.8 240 4,000 15.48 -

300 VP 300 318 1.9 1.0 15.1 2.2 286 4,000 21.96 -

350 VM 350 370 1.2 14.3 2.0 339 4,000 24.38 -

400 VM 400 420 1.3 16.2 2.2 385 4,000 31.29 -

+- +- +-

UNIT: mm

Notes;

1. The maximum outer diameter(minimum diameter) is the largest(smallest) of outer diameter measurement at a location.

2. The average outer diameter is the average for outer diameter measurements made in a direction other than two parallel direction or a circumference measurement divided by 3.142.

3. The mass per unit length(m) in the table, which was calculated using a specific gravity of U-PVC(1.43) is only for information, not part of standards.

4. The length tolerance is +10mm or –10mm.

5. The pipe of VM350 and VM400 are confirmed as JIS K 6741 standard.

6. The pipe of HI-PVC is confirmed as JIS K6742 standard.

VP and VM plane end pipe

U-PVC

JIS K 6741 or 6742

VP plane end pipe

HI-PVC

JIS K 6742

ASAHI AV VINYL PIPES – U-PVC

VU PIPES

Nominal Size Identification

Outer diameter ThicknessApprox.

Innerdiameter

LengthCalculated

Weight(kg/m)

Basic Dimension

AverageTolerance

( )

Min.Dimension

Tolerance

( )

40 VU 40 48 0.2 1.8 0.4 44 4,000 0.413

50 VU 50 60 0.2 1.8 0.4 56 4,000 0.521

65 VU 65 76 0.3 2.2 0.6 71 4,000 0.825

75 VU 75 89 0.3 2.7 0.6 83 4,000 1.16

100 VU 100 114 0.4 3.1 0.8 107 4,000 1.74

125 VU 125 140 0.5 4.1 0.8 131 4,000 2.74

150 VU 150 165 0.5 5.1 0.8 154 4,000 3.94

200 VU 200 216 0.7 6.5 1.0 202 4,000 6.57

250 VU 250 267 0.9 7.8 1.2 250 4,000 9.76

300 VU 300 318 1.0 9.2 1.4 298 4,000 13.7

350 VU 350 370 1.2 10.5 1.4 348 4,000 18.1

400 VU 400 420 1.3 11.8 1.6 395 4,000 23.1

450 VU 450 470 1.5 13.2 1.8 442 4,000 28.9

500 VU 500 520 1.6 14.6 2.0 489 4,000 35.3

+- +-

VU Pipe - JIS K6741

UNIT: mm

Notes;

1. The maximum outer diameter(minimum diameter) is the largest(smallest) of outer diameter measurement at a location.

2. The average outer diameter is the average for outer diameter measurements made in a direction other than two parallel direction or a circumference measurement divided by 3.142.

3. The mass per unit length(m) in the table, which was calculated using a specific gravity of U-PVC(1.43) is only for information, not part of standards.

4. The length tolerance is +10mm, –10mm.

VU Plane end pipe U-PVC

ASAHI AV TS FITTINGS

Common Dimension for TS Socket Connection

Taper : 1/TTaper : 1/T

Nominal Size 13mm to 50mm Nominal Size 65mm to 150mm

JIS K6743-1993

Nominal Size d1

d1Tolerance

( )l 1/T D DT

D, DTTolerance

d (Minimum)Outer diameter

of pipe

10 15.40 0.20 22.0 1/25 21.0 21.0 -0.5 10 15

13 18.40 0.20 26.0 1/30 24.0 24.0 -0.6 13 18

16* 22.40 0.20 30.0 1/34 29.0 29.0 -0.7 16 22

20 26.45 0.20 35.0 1/34 33.0 33.0 -0.8 20 26

25 32.55 0.25 40.0 1/34 40.0 40.0 -1.0 25 32

28* 34.55 0.25 40.0 1/34 42.0 42.0 -1.0 28 34

30 38.60 0.25 44.0 1/34 46.0 46.0 -1.0 31 38

35* 42.60 0.25 44.0 1/34 51.0 51.0 -1.2 35 42

40 48.70 0.30 55.0 1/37 57.0 57.0 -1.2 40 48

50 60.80 0.30 63.0 1/37 70.0 70.0 -1.5 51 60

65* 76.60 0.30 61.0 1/48 87.0 88.5 -1.5 67 76

75 89.60 0.30 64.0 1/49 102.0 104.5 -1.5 77 89

100 114.70 0.30 84.0 1/56 130.0 133.5 -1.8 100 114

125* 140.80 0.30 104.0 1/58 157.0 161.0 -1.8 125 140

150 166.00 0.40 132.0 1/63 186.0 190.0 -2.0 146 165

UNIT: mm

Notes;

1. Tolerance for dimension (l ) is +4mm, -0.5mm.

2. Sizes marked with * are according to AV original standard.

+-


90º ELBOW

Nominal Size D t H HI-PVC

13 24.0 3.0 36 Available

16* 29.0 3.5 43 Available

20 33.0 3.5 50 Available

25 40.0 4.0 58 Available

28* 42.0 4.0 62 -

30 46.0 4.0 65 Available

35* 51.0 4.5 70 -

40 57.0 4.5 82 Available

50 70.0 5.0 96 Available

65* 87.0 6.6 110 Available

75* 102.0 8.0 120 Available

100* 130.0 10.0 153 Available

125* 157.0 11.0 187 Available

150* 186.0 13.0 230 Available

UNIT: mm

Nominal Size 13mm to 50mm


SOCKET

Notes;

1. Tolerance for dimension (H) is +4mm, -0.5mm.




Nominal Size D L HI-PVC

13 24.0 57 Available

16* 29.0 67 Available



28* 42.0 87 -


35* 51.0 95 -



65* 87.0 145 Available


100 130.0 200 Available

125* 157.0 231 Available

150 186.0 300 Available

UNIT: mm

Notes;

1. Tolerance for dimension (L) is +4.0mm, -4.0mm.


JIS K6743-1993

JIS K6743-1993


REDUCING SOCKET

NominalSize

D t D1 t1 L HI-PVC

*16 x 13 29.0 3.5 24.0 3.0 61 Available

20 x 13 33.0 3.5 24.0 3.0 68 Available

*20 x 16 33.0 3.5 29.0 3.5 71 Available

25 x 13 40.0 4.0 24.0 3.0 86 Available

*25 x 16 40.0 4.0 29.0 3.5 85 Available

25 x 20 40.0 4.0 33.0 3.5 84 Available

30 x 20 46.0 4.0 33.0 3.5 93 Available

30 x 25 46.0 4.0 40.0 4.0 93 Available

*40 x 20 57.0 4.5 33.0 3.5 113 Available

40 x 25 57.0 4.5 40.0 4.0 114 Available

40 x 30 57.0 4.5 46.0 4.0 114 Available

*50 x 20 70.0 5.0 33.0 3.5 116 Available

*50 x 25 70.0 5.0 40.0 4.0 140 Available

50 x 30 70.0 5.0 46.0 4.0 136 Available

50 x 40 70.0 5.0 57.0 4.5 136 Available

*65 x 40 87.0 6.6 57.0 4.5 145 Available

*65 x 50 87.0 6.6 70.0 5.0 149 Available

*75 x 40 102.0 8.0 57.0 4.5 153 Available

75 x 50 102.0 8.0 70.0 5.0 165 Available

*75 x 65 102.0 8.0 87.0 5.0 163 Available

100 x 75 130.0 10.0 102 8.0 190 Available

*125 x 100 157.0 11.0 130 10 230 Available

150 x 100 186.0 13.0 130 10 295 Available

*150 x 125 186.0 13.0 157 11 272 Available

UNIT: mm

1. Tolerance for dimension (L) is +4mm, -4mm.




Notes;

JIS K6743-1993


TEENominal

SizeD t H H1 HI-PVC

13 24.0 3.0 36 36 Available

16* 29.0 3.5 43 43 Available

20 33.0 3.5 50 50 Available

25 40.0 4.0 58 58 Available

28* 42.0 4.0 61 61 -

30 46.0 4.0 65 65 Available

35* 51.0 4.5 69 69 -

40 57.0 4.5 82 82 Available

50 70.0 5.0 96 96 Available

65* 87.0 6.6 110 110 Available

75 102.0 8.0 120 120 Available

100 130.0 10.0 152 152 Available

125* 157.0 11.0 187 187 Available

150 186.0 13.0 230 230 Available

UNIT: mm

Notes;

1. Tolerance for dimension (H) is +5mm, -1mm.




CAPNominal

SizeD t L HI-PVC

13 24.0 3.0 29.0 Available

16* 29.0 3.5 33.5 Available

20 33.0 3.5 38.5 Available

25 40.0 4.0 44.0 Available

28* 42.0 4.0 44.0 -

30 46.0 4.0 48.0 Available

35* 51.0 4.5 48.5 -

40 57.0 4.5 59.5 Available

50 70.0 5.0 68.0 Available

65* 87.0 6.6 96.0 Available

75 102.0 8.0 105 Available

100 130.0 10.0 138 Available

150 186.0 13.0 205 Available

UNIT: mm

1. Tolerance for dimension (L) is +5mm, -0mm.


3. Dimension of R is from 1mm to 5mm.



Notes;

JIS K6743-1993

JIS K6743-1993


REDUCING TEE

UNIT: mm

Notes;

1. Tolerance for dimension (H and H1) is +5mm, -1mm.


Nominal Size 65mm to 150mmNominal Size 13mm to 50mm

NominalSize

D t H D1 H1 HI-PVC

*65 x 40 87.0 6.6 95 57.0 95 Available

*65 x 50 87.0 6.6 102 70.0 104 Available

75 x 25 102.0 8.0 93 40.0 88 Available

75 x 40 102.0 8.0 100 57.0 102 Available

75 x 50 102.0 8.0 105 70.0 110 Available

*75 x 65 102.0 8.0 114 87.0 117 Available

100 x 50 130.0 10.0 125 70.0 122 Available

100 x 75 130.0 10.0 140 102.0 132 Available

*125 x 75 157.0 11.0 161 102.0 147 Available

*125 x 100 157.0 12.0 175 130.0 167 Available

150 x 75 186.0 13.0 195 102.0 158 Available

150 x 100 186.0 13.0 208 130.0 182 Available

*150 x 125 186.0 13.0 218 157.0 202 Available

JIS K6743-1993

Available

Available

Available

Available

Available

Available

Available

Available

Available

Available

Available

Available

Available

Available

Available

Available

Available

Available

Available

Available

Available

HI-PVC

5729.0684.557.0*40 x 16

6740.0734.557.040 x 25

7146.0764.557.040 x 30

5824.0745.070.050 x 13

6329.0765.070.0*50 x 16

6833.0785.070.050 x 20

7340.0815.070.050 x 25

7746.0845.070.050 x 30

8857.0905.070.050 x 40

6233.0704.557.040 x 20

66

62

59

57

55

55

53

51

48

46

41

H

24.0

40.0

33.0

29.0

24.0

33.0

29.0

24.0

29.0

24.0

24.0

D1

524.557.040 x 13

614.046.030 x 25

H1

514.046.0*30 x 16

564.046.030 x 20

tD

403.533.020 x 13

383.529.0*16 x 13

434.040.025 x 13

453.533.0*20 x 16

534.040.025 x 20

484.040.0*25 x 16

464.046.030 x 13

NominalSize


FAUCET ELBOW

Nominal Size D t D1 D2 l1 l2 T H H1 Thread HI-PVC

13 24.0 3.0 30 34 17 14 4 38 29 Rp ½ Available

16 29.0 3.5 30 34 17 14 4 43 32 Rp ½ Available

20 33.0 3.5 37 42 19 16 4 51 36 Rp ¾ Available

25 40.0 4.0 46 52 21 18 5 59 40 Rp 1 Available

UNIT: mm

Notes;


2. Tolerance for dimension (H1) is +5mm, -2mm

3. Tolerance for dimension (l2) is +1mm, -1mm.

Caution;

1. Use seal tape and gasket at thread connection.

2. Do not use for connection between metal piping and U-PVC(HI-PVC) piping.

3. Please set proper piping support around Elbow.


45º ELBOW

Nominal Size D t H HI-PVC

20 33.0 3.5 44 Available

25 40.0 4.0 51 Available

UNIT: mm

Notes;


JIS K6743-1993

ASAHI AV FITTINGS

AV 45º BEND

Nominal Size D d t L R HI-PVC

40 57 40 4.5 69 20.0 Available

50 70 51 5.0 80 25.5 Available

65 87 67 6.6 81 34.0 Available

75 101 78 6.0 97 39.0 Available

100 129 100 7.3 122 50.0 Available

125 156 125 7.7 149 62.5 Available

150 185 148 10 184 74.0 Available

UNIT: mm

AV 90º BEND

Nominal Size d1 d2 l D D1 t L R

75 89.80 88.13 72 101 90.0 6.0 137 65

100 115.00 112.89 92 129 114.6 7.3 172 80

125 141.20 138.72 112 156 140.4 7.7 237 125

150 166.50 163.39 140 185 167.6 9.8 260 120

UNIT: mm

ASAHI AV LARGE SIZE FITTINGS

AV SHORT ELBOW

Nominal Size d1 d2 l D t L R HI-PVC

200 217.00 214.10 145 240 15 265 190 Available

250 267.70 265.15 140 287 10 280 235 -

UNIT: mm

AV 90º BEND

Nominal Size d1 d2 l D D1 t L R

200 217.00 214.10 145 240 226 15 341 196

250 267.70 264.88 155 287 267 10 402 247

300 318.70 315.88 155 337 318 10 385 240

UNIT: mm

AV 45º BEND

Nominal Size D d t L R HI-PVC

200 240 196 15 193 98.0 Available

250 287 247 10 213 123.5 -

300 337 298 10 225 149.0 -

UNIT: mm


Nominal Size 90 ELBOW 45 BEND SHORT ELBOW

SOCKET(Thick Wall)

REDUCING SOCKET

TEEREDUCING

TEE

200 0.75 0.75 0.75 0.75 0.75 0.75 0.75

250 0.5 0.5 0.5 0.5 0.5 0.5 0.5

300 0.4 0.4 - 0.4 0.4 0.4 0.75

Maximum Permissible Working Pressure for AV Large Size Fittings at ambient temperature

UNIT: MPa

Maximum working pressure includes water hammer pressure on hydrostatic pressure.


AV SOCKET (THICK WALL)

Nominal Size d1 d2 l D d Z L HI-PVC

200 217.00 214.10 145 236 202 10 300 Available

250 267.70 264.88 155 287 250 10 320 -

300 318.70 315.52 175 337 298 10 360 -

UNIT: mm

AV REDUCING SOCKET

Nominal Size d1 d2 l1 D1 d3 l2 D2 L HI-PVC

200 x 150 146 166.00 132 186 217.00 145 240 356 -

250 x 200 194 217.90 200 238 269.30 250 290 530 -

UNIT: mm


AV TEE

Nominal Size d1 d2 l D d t L HI-PVC

200 217.00 214.10 145 240 196 15 266 Available

250 267.70 264.88 155 287 247 10 295 -

250 318.70 315.52 175 337 298 10 340 -

UNIT: mm

AV REDUCING TEE

Nominal Size d1 d2 l1 D1 d3 d4 l2 D2 H l3 L

200x 75 194 217.00 145 240 77 89.60 64 102 180 201 402

200x100 194 217.00 145 240 100 114.70 84 130 200 215 430

200x150 194 217.00 145 240 146 166.00 132 186 253 238 476

250x 75 240 269.30 250 290 77 89.60 64 102 210 306 612

250x100 240 269.30 250 290 100 114.70 84 130 225 320 640

250x200 240 269.30 250 290 194 217.90 200 238 345 375 750

300x75 298 320.7 300 343 77 89.60 64 102 236 361 722

UNIT: mm

VINYL PIPES U-PVC HI-PVC & FITTINGS JIS SERIES. ASAHI AV VINYL PIPES – U-PVC (HI-PVC) VP and VM...

Documents

Transcript of VINYL PIPES U-PVC HI-PVC & FITTINGS JIS SERIES. ASAHI AV VINYL PIPES – U-PVC (HI-PVC) VP and VM...