Vinod_Patil._C.V.
3
Vinod Gopal Patil Email: [email protected] Phone: +91-9970191393 /+91-9158864404 Career Objective: To become part of a dynamic organization where I can fully apply my managerial, analytical and problem solving skills towards the organization’s growth and that in turn expedites my professional growth. Executive Summary: Patience and positive attitude towards situations in life. Ability to set goals and achieve them on a regular basis. Has strong ability to learn new technologies in short span and implement independently. Educational Qualification: Examination University Institute Year CPI / % Class M. tech Nirma University, Nirma University, 2013 7.30 First Class (Design Engineering) Ahmedabad. Ahmedabad. B.E. (Mechanical) NMU, Govt. college of 2010 67.93 Distinction Jalgaon. Engg. Jalgaon. HSC Nasik ASC, College, 2006 70.17 First Class Chopda. SSC Nasik PVM, 2004 82.53 Distinction Chopda. Academic Achievement: GATE qualified in 2011. Member of International Association of Engineers (IAENG). Associate member of Universal Association of Mechanical and Aeronautical Engineers (UAMAE). Presented paper on national level on “Viscoelastic damping for vibration and noise control”.
-
Upload
vinod-patil -
Category
Documents
-
view
6 -
download
1
Transcript of Vinod_Patil._C.V.
Vinod Gopal PatilEmail: [email protected]
Phone: +91-9970191393 /+91-9158864404
Career Objective: To become part of a dynamic organization where I can fully apply my managerial, analytical and
problem solving skills towards the organization’s growth and that in turn expedites my professional growth.
Executive Summary: Patience and positive attitude towards situations in life. Ability to set goals and achieve them on a regular basis. Has strong ability to learn new technologies in short span and implement independently.
Educational Qualification:
Examination University Institute Year CPI / % Class
M. tech Nirma University, Nirma University, 2013 7.30 First Class(Design Engineering) Ahmedabad. Ahmedabad.
B.E. (Mechanical) NMU, Govt. college of 2010 67.93 Distinction Jalgaon. Engg. Jalgaon.
HSC Nasik ASC, College, 2006 70.17 First Class Chopda. SSC Nasik PVM, 2004 82.53 Distinction Chopda.
Academic Achievement: GATE qualified in 2011. Member of International Association of Engineers (IAENG). Associate member of Universal Association of Mechanical and Aeronautical Engineers (UAMAE). Presented paper on national level on “Viscoelastic damping for vibration and noise control”. Presented paper on national level on “Demagnetisation of refrigerator”. Participation in short term Course on “FEA using ANSYS Software” in Nirma University,
Ahmedabad. [Oct’ – Dec’ 2011] Participated in Seminar on “Design and Fabrication of Pressure Vessel using ASME Code”.
[March’ – 2012] Participated in 3rd Nirma University International Conference on Engineering, NUiCONE-2012, in
Nirma University, Ahmedabad. Participated in 4th Nirma University International Conference on Engineering, NUiCONE-2013, in
Nirma University, Ahmedabad.
Memberships: Member of International Association of Engineers (IAENG). Associate member of Universal Association of Mechanical and Aeronautical Engineers (UAMAE).
Academic Projects: M. Tech. Project: Modal Analysis of a Coupled Steam Turbine and Generator rotors. (At
ERDA, Electrical Research and Development Association, Makarpura GIDC, Vadodara.) [July’12 – May’13]
- Anlysed the torsional natural frequency of coupled steam turbine and generator rotors.- The resonance condition in the system is avoided. - The failure of turbine generator rotor system is avoided, by adjusting the design paramaters.- Software Used: Pro-E, Solidworks, Ansys Workbench 14, Matlab, C++.
B. Tech. Project: Design and Manufacture of Drill Jig for Piston Used in Hydraulic Breaking System. ( At Pramey Industry, MIDC, Jalgaon.) [July’09 – Jun’10]
- For two holes and four holes piston a single drilled jig is designed.- Due to the use of new designed Drill Jig we have reduced Labour cost, manufacturing cost
and drilling operation time.- Software Used: Solid-Edge, Auto-CAD.
Trainings and Internships: Railway workshop in Routine Overhauling, Bhusawal. [May’ - Jun’08]
- Underwent and extensive training to analyse the working of Routine Overhauling of Railway Wagons.
BOSCH Chasis System India Ltd., Bambhori, Jalgaon. [May’ - July’12]- Extensive training to analyse the design and manufacturing of Automobile’s Breaking
System.
Work Experience: Worked as Assistant Professor in P.G.Moze College of Engineering. [Aug’13 – June’14] Working as Assistant Professor in Dr. D Y Patil School of Engineering, Lohegaon, Pune. [July’14 – till]
Software Skills: Hyperworks (Hypermesh, Radioss, Optistruct) – course from “Finite to Infinite”, Pune. Ansys 11/12/14 (Mechanical). Creo 2.0 AUTO-CAD MS-CITKey Areas: Proficient in FEA Analysis using hypermesh software (Meshing, Static Structural Analysis, Modal
Analysis) Proficient in CAD Modeling and FEA Analysis (Static Structural Analysis, Modal Analysis, Thermal
Analysis [Workbench]). Machine Design, Pressure Vessel Design and Strength of Material.
Self - Assessment:I set high standards for myself and have my own dreams and ambitions. I have a flair for learning new things and persistence in problem solving. I strongly believe that with my skills, analytical and logical ability, determination, dedication, commitment and diligent efforts, I can prove to be an asset to any organization.
(Vinod G. Patil)
