VINO PENDANT TYPE: DAMP LOCATION PX SERIES
5
SERIES LUMENS 1 CCT DRIVER / DIMMING 2 MOUNTING 3 CORD OPTIONS FINISH 7 VP2407PX 20L 40L 60L 2000 Lm 4000 Lm 6000 Lm 30K 35K 3000K 3500K EX DO10X DS10X Electronic Driver, 120V/277V 1%, 0-10V, 120V/277V 10%, 0-10V, 120V/277V RDC5 HM 4 AT 4 PM 4 CD 4 CM 4 EMCR 5 EMRM EMEN Small Driver Canopy Hang Straight Hang Straight All Thread Rigid Pendant Mount Cord / Cable Mount Cord Mount 10W Canopy Mounted EM 7W Remote EM 7W Remote with Enclosure STANDARD CORDS MW 8 MB 8 JR JB JG JS JC JH CC Matte White Matte Black Tri-Coat Red Tri-Coat Blue Tri-Coat Green Tri-Coat Brass Tri-Coat Copper Tri-Coat Chrome Custom Color CW CB CS White Black Silver DECORATIVE CORDS 6 See Page 5 for Decorative Braided Color Cords See Page 5 for Full Range of Color Options 5 YEAR WARRANTY PROJECT: TYPE: VP2407PX JR - Tri-Coat Red NOTES: 1 Nominal Source Lumens at 35K 2 Contact Factory for Additional Options 3 See Mounting Pages for EM Options and Details on Components and Finishes 4 Specify Length in Inches: See Mounting Page for Available Lengths 5 EMCR Replaces RDC5 6 Decorative Cord 120” Max Length 7 See Color Page for More Options/Consult Factory for Special Finishes 8 Standard Finishes 83-10070_RB WWW.SPECLIGHT.COM • 994 JEFFERSON STREET, FALL RIVER, MA 02721 • 508.678.2303 FAX 508.678.2260 Dimensions and values shown are nominal. Spectrum Lighting continually works to improve products and reserves the right to make changes which may alter the performance or appearance of products. EXAMPLE: VP2407PX20L30KEXRDC5HM36JR VP2407PX JS - Tri-Coat Brass VP2407PX JC - Tri-Coat Copper VP2407PX JH - Tri-Coat Chrome VP2407PX JB - Tri-Coat Blue VP2407PX JG - Tri-Coat Green VINO PENDANT DAMP LOCATION PX SERIES
Transcript of VINO PENDANT TYPE: DAMP LOCATION PX SERIES
SERIES LUMENS1 CCT DRIVER / DIMMING2 MOUNTING3 CORD OPTIONS FINISH7
VP2407PX 20L40L60L
2000 Lm 4000 Lm6000 Lm
30K35K
3000K3500K
EXDO10XDS10X
Electronic Driver, 120V/277V 1%, 0-10V, 120V/277V 10%, 0-10V, 120V/277V
RDC5HM4
AT4
PM4
CD4
CM4
EMCR5
EMRMEMEN
Small Driver CanopyHang StraightHang Straight All ThreadRigid Pendant MountCord / Cable Mount Cord Mount 10W Canopy Mounted EM7W Remote EM 7W Remote with Enclosure
STANDARD CORDS MW8
MB8
JRJBJGJSJCJH
CC
Matte WhiteMatte BlackTri-Coat RedTri-Coat BlueTri-Coat GreenTri-Coat Brass Tri-Coat CopperTri-Coat ChromeCustom Color
CWCBCS
WhiteBlackSilver
DECORATIVE CORDS6
See Page 5 for Decorative Braided
Color Cords
See Page 5 for Full Range of Color Options
5YEAR
WARRANTY
PROJECT:
TYPE:
VP2407PXJR - Tri-Coat Red
NOTES:1 Nominal Source Lumens at 35K 2 Contact Factory for Additional Options 3 See Mounting Pages for EM Options and Details on Components and Finishes 4 Specify Length in Inches: See Mounting Page for Available Lengths 5 EMCR Replaces RDC5 6 Decorative Cord 120” Max Length 7 See Color Page for More Options/Consult Factory for Special Finishes 8 Standard Finishes
83-10070_RBWWW.SPECLIGHT.COM • 994 JEFFERSON STREET, FALL RIVER, MA 02721 • 508.678.2303 FAX 508.678.2260
Dimensions and values shown are nominal. Spectrum Lighting continually works to improve products and reserves the right to make changes which may alter the performance or appearance of products.
EXAMPLE: VP2407PX20L30KEXRDC5HM36JR
VP2407PXJS - Tri-Coat Brass
VP2407PX JC - Tri-Coat Copper
VP2407PX JH - Tri-Coat Chrome
VP2407PX JB - Tri-Coat Blue
VP2407PX JG - Tri-Coat Green
VINO PENDANTDAMP LOCATIONPX SERIES
WWW.SPECLIGHT.COM • 994 JEFFERSON STREET, FALL RIVER, MA 02721 • 508.678.2303 FAX 508.678.2260 83-10070_RB
APPLICATION Vino pendant with evenly illuminated lens for performance decorative lighting.
FEATURES Speclume series fixtures offer contemporary style with functional luminaire performance. All fixtures are designed and manufactured in our factory. LED Driver in canopy for thermal management. A variety of mounting options are available.
ELECTRONICS LED system features high brightness white Samsung LED’s. 3-step MacAdam Ellipse binning. Standard CRI: 80+. Higher CRI, other CCT’s, R9 and custom LED configurations are available; consult factory. Variety of electronic 120V/277V and dimming drivers.
CONSTRUCTIONFixtures are spun in our factory from 0.060 high purity aluminum.
FINISHMulti-stage polyester powder-coat process applied on our dedicated paint lines. See mounting and color pages for standard finishes. Special tri-cut process for “J” series finish produces rich, semi-translucent finish. Interior finished Matte White for maximum optical performance and lens uniformity.
CODE COMPLIANCEBAA compliant. ETL certified to meet US and Canadian standards. Suitable for dry or damp locations. Manufactured and tested to UL standards No. 1598/8750.
HOUSING DIMENSIONS FEATURES
VINO PENDANTDAMP LOCATION
A
B
A B
24.1612.1 mm
7.2182.8 mm
CDCORD / CABLE MOUNT
CMCORD MOUNT
HM / AT / PMHANG STRAIGHT / ALL THREAD / PENDANT
CEILING MOUNT(SEE MOUNTING PAGES FOR MORE OPTIONS & CANOPY DIMENSIONS.)
VP2407PX SHOWN WITH RDC5PM VP2407PX SHOWN WITH RDC5CMVP2407PX SHOWN WITH RDC5CD
WATTAGE / LUMENS DATA
PART NUMBER
SOURCE LUMENS1
DELIVERED LUMENS2
SYSTEM WATTS LPW
VP2407PX20L 2000 1502 14 107
VP2407PX40L 4000 3072 28 110
VP2407PX60L 6000 4846 44 110
1 Nominal Source Lumens at 35K 2 Nominal Delivered Lumens at 35K
PX SERIES
3/11/2019
file:///M:/Engineering/Paul_C/VP2407LX%20-%20IES%20and%20PDF%20files%20%20(DO%20NOT%20PUBLISH_USE%20THESE%20FILES)/SP-00692_1%20~%20VP2407-60L35KEX-xx.html 1/2
VP2407-60L-35K-EX-xx
CANDLEPOWER CURVE INTENSITY ZONAL LUMENS SINGLE UNIT: PERFORMANCE INITIAL FOOTCANDLES
BASED ON IES BEAM ANGLE
MULTIPLE UNITS: PERFORMANCE 80/50/20% REFLECTANCES
INITIAL FOOTCANDLES AND WATTS PER SQUARE FOOT
0° 10° 20°
30°
40°
50°
60°
70°
80°
90°
0°
200 cd
400 cd
600 cd
800 cd
1000 cd
1200 cd
1400 cd
1600 cd
0.00°
0.00° 1,679
5.00° 1,670
10.00° 1,646
15.00° 1,610
20.00° 1,557
30.00° 1,415
40.00° 1,229
50.00° 1,001
60.00° 746
70.00° 477
80.00° 214
90.00° 2
0° - 10° 161 3%
0° - 20° 616 13%
0° - 30° 1,305 27%
0° - 40° 2,136 44%
0° - 60° 3,780 78%
0° - 80° 4,743 98%
0° - 90° 4,846 100%
Total 4,846 100%
Ceiling Height
Fixture Spacing
RCR 1 RCR 3
FC + W/Sq. Ft. FC + W/Sq. Ft.
18' 12' 31 0.28 19 0.23
22' 14' 26 0.23 20 0.23
26' 16' 20 0.18 13 0.15
Delivered Illuminance
Rating: (DIR)111 FC per W/Sq. Ft. 85 FC per W/Sq. Ft.
3' Suspension Length Square rooms used for multiple units:
- RCR 1: Length & Width = Ceiling Ht. - 5.5' x 10.00 - RCR 3: Length & Width = Ceiling Ht. - 5.5' x 3.33
+ Average Footcandles at 2.5' Above Floor
Delivered Lumens: 4,846 CP at 0deg (Nadir): 1,679 Beam Angle: 113.06 Lumen Multiplier: 20L x 0.31, 40L x 0.63Luminaire Watts: 44 CRI: 80+ Spacing Ratio: 1.25 CCT Multiplier: 27K x 0.97, 30K x 0.98, 40K x 1.02, 50K x 1.07
LER: 110.14
MountingHeight
AFF
FC atCenteron Floor
BeamDiameter
FC atBeamEdge
8.0 ' 26 fc 23.9 ' 8 fc
10.0 ' 17 fc 29.9 ' 5 fc
12.0 ' 12 fc 35.8 ' 3 fc
14.0 ' 9 fc 41.8 ' 2 fc
16.0 ' 7 fc 47.8 ' 2 fc
20.0 ' 4 fc 59.7 ' 1 fc
24.0 ' 3 fc 71.7 ' 1 fc
28.0 ' 2 fc 83.6 ' 1 fc
WWW.SPECLIGHT.COM • 994 JEFFERSON STREET, FALL RIVER, MA 02721 • 508.678.2303 FAX 508.678.2260 83-10070_RB
VP2407PX-60L-35K-EX-xx
VINO PENDANTDAMP LOCATIONPX SERIES / PHOTOMETRIC DATA
3/11/2019
file:///M:/Engineering/Paul_C/VP2407LX%20-%20IES%20and%20PDF%20files%20%20(DO%20NOT%20PUBLISH_USE%20THESE%20FILES)/SP-00692_1%20~%20VP2407-60L35KEX-xx.html 1/2
VP2407-60L-35K-EX-xx
CANDLEPOWER CURVE INTENSITY ZONAL LUMENS SINGLE UNIT: PERFORMANCE INITIAL FOOTCANDLES
BASED ON IES BEAM ANGLE
MULTIPLE UNITS: PERFORMANCE 80/50/20% REFLECTANCES
INITIAL FOOTCANDLES AND WATTS PER SQUARE FOOT
0° 10° 20°
30°
40°
50°
60°
70°
80°
90°
0°
200 cd
400 cd
600 cd
800 cd
1000 cd
1200 cd
1400 cd
1600 cd
0.00°
0.00° 1,679
5.00° 1,670
10.00° 1,646
15.00° 1,610
20.00° 1,557
30.00° 1,415
40.00° 1,229
50.00° 1,001
60.00° 746
70.00° 477
80.00° 214
90.00° 2
0° - 10° 161 3%
0° - 20° 616 13%
0° - 30° 1,305 27%
0° - 40° 2,136 44%
0° - 60° 3,780 78%
0° - 80° 4,743 98%
0° - 90° 4,846 100%
Total 4,846 100%
Ceiling Height
Fixture Spacing
RCR 1 RCR 3
FC + W/Sq. Ft. FC + W/Sq. Ft.
18' 12' 31 0.28 19 0.23
22' 14' 26 0.23 20 0.23
26' 16' 20 0.18 13 0.15
Delivered Illuminance
Rating: (DIR)111 FC per W/Sq. Ft. 85 FC per W/Sq. Ft.
3' Suspension Length Square rooms used for multiple units:
- RCR 1: Length & Width = Ceiling Ht. - 5.5' x 10.00 - RCR 3: Length & Width = Ceiling Ht. - 5.5' x 3.33
+ Average Footcandles at 2.5' Above Floor
Delivered Lumens: 4,846 CP at 0deg (Nadir): 1,679 Beam Angle: 113.06 Lumen Multiplier: 20L x 0.31, 40L x 0.63Luminaire Watts: 44 CRI: 80+ Spacing Ratio: 1.25 CCT Multiplier: 27K x 0.97, 30K x 0.98, 40K x 1.02, 50K x 1.07
LER: 110.14
MountingHeight
AFF
FC atCenteron Floor
BeamDiameter
FC atBeamEdge
8.0 ' 26 fc 23.9 ' 8 fc
10.0 ' 17 fc 29.9 ' 5 fc
12.0 ' 12 fc 35.8 ' 3 fc
14.0 ' 9 fc 41.8 ' 2 fc
16.0 ' 7 fc 47.8 ' 2 fc
20.0 ' 4 fc 59.7 ' 1 fc
24.0 ' 3 fc 71.7 ' 1 fc
28.0 ' 2 fc 83.6 ' 1 fc
3/11/2019
file:///M:/Engineering/Paul_C/VP2407LX%20-%20IES%20and%20PDF%20files%20%20(DO%20NOT%20PUBLISH_USE%20THESE%20FILES)/SP-00692_1%20~%20VP2407-60L35KEX-xx.html 1/2
VP2407-60L-35K-EX-xx
CANDLEPOWER CURVE INTENSITY ZONAL LUMENS SINGLE UNIT: PERFORMANCE INITIAL FOOTCANDLES
BASED ON IES BEAM ANGLE
MULTIPLE UNITS: PERFORMANCE 80/50/20% REFLECTANCES
INITIAL FOOTCANDLES AND WATTS PER SQUARE FOOT
0° 10° 20°
30°
40°
50°
60°
70°
80°
90°
0°
200 cd
400 cd
600 cd
800 cd
1000 cd
1200 cd
1400 cd
1600 cd
0.00°
0.00° 1,679
5.00° 1,670
10.00° 1,646
15.00° 1,610
20.00° 1,557
30.00° 1,415
40.00° 1,229
50.00° 1,001
60.00° 746
70.00° 477
80.00° 214
90.00° 2
0° - 10° 161 3%
0° - 20° 616 13%
0° - 30° 1,305 27%
0° - 40° 2,136 44%
0° - 60° 3,780 78%
0° - 80° 4,743 98%
0° - 90° 4,846 100%
Total 4,846 100%
Ceiling Height
Fixture Spacing
RCR 1 RCR 3
FC + W/Sq. Ft. FC + W/Sq. Ft.
18' 12' 31 0.28 19 0.23
22' 14' 26 0.23 20 0.23
26' 16' 20 0.18 13 0.15
Delivered Illuminance
Rating: (DIR)111 FC per W/Sq. Ft. 85 FC per W/Sq. Ft.
3' Suspension Length Square rooms used for multiple units:
- RCR 1: Length & Width = Ceiling Ht. - 5.5' x 10.00 - RCR 3: Length & Width = Ceiling Ht. - 5.5' x 3.33
+ Average Footcandles at 2.5' Above Floor
Delivered Lumens: 4,846 CP at 0deg (Nadir): 1,679 Beam Angle: 113.06 Lumen Multiplier: 20L x 0.31, 40L x 0.63Luminaire Watts: 44 CRI: 80+ Spacing Ratio: 1.25 CCT Multiplier: 27K x 0.97, 30K x 0.98, 40K x 1.02, 50K x 1.07
LER: 110.14
MountingHeight
AFF
FC atCenteron Floor
BeamDiameter
FC atBeamEdge
8.0 ' 26 fc 23.9 ' 8 fc
10.0 ' 17 fc 29.9 ' 5 fc
12.0 ' 12 fc 35.8 ' 3 fc
14.0 ' 9 fc 41.8 ' 2 fc
16.0 ' 7 fc 47.8 ' 2 fc
20.0 ' 4 fc 59.7 ' 1 fc
24.0 ' 3 fc 71.7 ' 1 fc
28.0 ' 2 fc 83.6 ' 1 fc
SOME OPTIONS NOT AVAILABLE ON ALL FIXTURES, CONSULT SPECIFICATION SHEETS. SEE INDIVIDUAL SPECIFICATION SHEETS OR CONSULT FACTORY FOR ADDITIONAL INFORMATION.NOTE: THIS IS TYPICAL OF SPECLUME SPECIFICATION FOR PENDANT MOUNTING. INDIVIDUAL FIXTURES OR PROJECTS MAY HAVE SPECIALIZED REQUIREMENTS.
MOUNTING & ACCESSORIES
EMERGENCY BATTERY OPTIONS REMOTE EMERGENCY BATTERY OPTIONS
Ø 9.0
EMCR - LARGE DRIVER CANOPY FOR 10W EMERGENCY BATTERY
(FOR ROUND CEILING MOUNT TYPES)
3.25
EMRM* - 7W REMOTE EMERGENCY BATTERY (50' MAX)
A B C
2.0 17.0 6.2
A
B
C
A B C
1.3 12.6 13.0
A
B
C
EMEN* - 7W REMOTE EMERGENCY BATTERY WITH ENCLOSURE (50' MAX)
*OTHER EM BATTERY SIZES AVAILABLE, CONSULT FACTORY
WWW.SPECLIGHT.COM • 994 JEFFERSON STREET, FALL RIVER, MA 02721 • 508.678.2303 FAX 508.678.2260
*MAXIMUM ONE PIECE STEM LENGTH IS 72". **MAXIMUM ONE PIECE STEM LENGTH IS 36". LONGER LENGTHS ARE POSSIBLE USING MULTIPLE STEMS AND COUPLERS.
CEILING MOUNTING
Ø 5.3 2.545°
HM*HANG STRAIGHT45° SWIVEL 1/2" STEM - 3/8" NPT
ORDER: HM (Length) SPECIFY LENGTH: HM3 - 3"HM6 - 6"HM12 - 12"HM18 - 18"
HMLC(XX)Custom Length (Specify in Inches)
HM24 - 24"HM36 - 36"HM48 - 48"HM72 - 72"
ADJUST AND LOCKS
CDCORD / CABLE MOUNTSJ CORD WITH 1/16 SS CABLE
ORDER: CD (Length) SPECIFY LENGTH: CD36 - 36"CD72 - 72" CD144 - 144"
CDLC(XX)Custom Length (Specify in Inches)
120" Max Length for Decorative Cords
CMCORD MOUNTSJ CORD WITH STRAIN RELIEF
ORDER: CM (Length) SPECIFY LENGTH: CM36 - 36"CM72 - 72" CM144 - 144"
CMLC(XX)Custom Length (Specify in Inches)
120" Max Length for Decorative Cords
FIELDCUTABLE
45°
AT**HANG STRAIGHT ALL THREAD45° SWIVEL 1/2" STEM - 1/4" IP
ORDER: AT (Length) SPECIFY LENGTH: AT12 - 12"AT24 - 24"AT36 - 36"
FIELD CUT THREADED PIPE TO LENGTH NEEDED
SLIP "PIPE COVER" OVER THREADED PIPE
CUT "PIPE COVER 3/4" SHORTERTHAN THREADED PIPE
RDC5 - SMALL DRIVER CANOPY (STANDARD) MOUNTS TO 4” OCTO J-BOX RIGID 1/2" STEM - 3/8" NPT
0°
PM*RIDGID PENDANT MOUNT
PM24 - 24"PM36 - 36"PM48 - 48"PM72 - 72"
ORDER: PM (Length) SPECIFY LENGTH: PM3 - 3"PM6 - 6"PM12 - 12"PM18 - 18"
PMLLC(XX)Custom Length (Specify in Inches)
83-10070_RB
COLOR OPTIONS - POWDER COAT PAINT FINISHES
AS Anodic Sapphire
AN Anodic Natural
AC Anodic Champagne
AZ Anodic Bronze
AK Anodic Black
AM Anodic Malachite
LG Lime Green
BY Burgundy
LB Light Blue
TWTextured White
BR Brecchia
SN Sun Gold
GH Graphite
CH Charcoal
AL Almond
MT*Textured Silver
CO Copper Metallic
TB Textured Black
OB* Oil Rubbed Bronze
VE Verde Green
RD Red Baron
OR Orange
CM Camel
PLPurple
TQ Turquoise
PG Pub Green
EG Evergreen
AY Aero Yellow
BL Blue Streak
PK Pink
SF Sea Foam
TIER 2 - TYPICAL FINISHES
DECORATIVE BRAIDED COLOR CORDS
TCTeal
NCWine
KCBeige
QCTurquoise
RCRed
YCYellow
BTCBlack/Brown
BWCBlack/White
OCBurnt Orange
CWWhite
CBBlack
CSSilver
GCGreen
CORD OPTIONSSTANDARD VINYL CORDS
WCWhite
BCBlack
SCSilver
TIER 1 - STANDARD FINISHESBZBronze
GB Gloss Black
GW Gloss White
MW Matte White
MB Matte Black
PT Platinum Silver
CUSTOM COLOR FINISHESCONTACT FACTORY
CCCustom Color
CC
TIER 3 - SPECIAL METAL FINISHESGA* Galvanized
GF* Gold Flake
*UNAVAILABLE FOR WET LOCATION
** UNAVAILABLE FOR INTERIOR
BA*/**Brushed Aluminum
WWW.SPECLIGHT.COM • 994 JEFFERSON STREET, FALL RIVER, MA 02721 • 508.678.2303 FAX 508.678.2260
TIER 4 - TRI-COAT FINISHESJR Tri-Coat Red
JPTri-Coat Copper
JBTri-Coat Blue
JS*Tri-Coat Brass
JG Tri-Coat Green
JH Tri-Coat Chrome
83-90084_RB
FIXTURE COLOR STANDARD CORD COLOR STANDARD CANOPY / STEM COLOR
Matte White, Textured White Matte White Matte White
Gloss White Matte White Gloss White
Matte Black, Gloss Black, Textured Black Matte Black Matte Black
All Others Matte Black Same Color as Fixture
Custom Color Contact Factory Contact Factory
STANDARD CORD / STEM / CANOPY FINISHES PAINT TIMES
*CONTACT FACTORY FOR SPECIFIC PRODUCT LEAD TIMES
TIER COST AVERAGE PAINT TIME*
Tier 1 - Standard Finishes $
Tier 2 - Typical Finishes $$
Tier 3 - Special Metal Finishes $$$
Tier 4 - Tri-Coat Finishes $$$
Custom Color Contact Factory Contact Factory
