Views of Solids Geometry D. Sketching the views of the solid. First, use blocks to construct a...

33
Views of Solids Views of Solids Geometry D Geometry D

TAGS:

Transcript of Views of Solids Geometry D. Sketching the views of the solid. First, use blocks to construct a...

Page 1: Views of Solids Geometry D. Sketching the views of the solid. First, use blocks to construct a similar solid to the one shown at the left.

Views of SolidsViews of SolidsViews of SolidsViews of Solids

Geometry DGeometry D

Page 2: Views of Solids Geometry D. Sketching the views of the solid. First, use blocks to construct a similar solid to the one shown at the left.

Sketching the views of the solid.

First, use blocks to construct a similar solid to the one shown at the left.

Page 3: Views of Solids Geometry D. Sketching the views of the solid. First, use blocks to construct a similar solid to the one shown at the left.

Sketch the view of the solid on 3d paper

Page 4: Views of Solids Geometry D. Sketching the views of the solid. First, use blocks to construct a similar solid to the one shown at the left.

Sketch the view of the solid on 3d paper

Page 5: Views of Solids Geometry D. Sketching the views of the solid. First, use blocks to construct a similar solid to the one shown at the left.

Sketch the right side view on 2d paper.

Page 6: Views of Solids Geometry D. Sketching the views of the solid. First, use blocks to construct a similar solid to the one shown at the left.

Sketch the right side view on 2d paper.

Page 7: Views of Solids Geometry D. Sketching the views of the solid. First, use blocks to construct a similar solid to the one shown at the left.

Sketch the right side view on 2d paper.

Page 8: Views of Solids Geometry D. Sketching the views of the solid. First, use blocks to construct a similar solid to the one shown at the left.

Sketch the front view on 2d paper.

Page 9: Views of Solids Geometry D. Sketching the views of the solid. First, use blocks to construct a similar solid to the one shown at the left.

Sketch the front view on 2d paper.

Page 10: Views of Solids Geometry D. Sketching the views of the solid. First, use blocks to construct a similar solid to the one shown at the left.

Sketch the left side view on 2d paper.

Page 11: Views of Solids Geometry D. Sketching the views of the solid. First, use blocks to construct a similar solid to the one shown at the left.

Sketch the left side view on 2d paper.

Page 12: Views of Solids Geometry D. Sketching the views of the solid. First, use blocks to construct a similar solid to the one shown at the left.

Sketch the back view on 2d paper.

Page 13: Views of Solids Geometry D. Sketching the views of the solid. First, use blocks to construct a similar solid to the one shown at the left.

Sketch the back view on 2d paper.

Page 14: Views of Solids Geometry D. Sketching the views of the solid. First, use blocks to construct a similar solid to the one shown at the left.

Sketch the top view on 2d paper.

Page 15: Views of Solids Geometry D. Sketching the views of the solid. First, use blocks to construct a similar solid to the one shown at the left.

Sketch the top view on 2d paper.

Page 16: Views of Solids Geometry D. Sketching the views of the solid. First, use blocks to construct a similar solid to the one shown at the left.

Sketching the views of the solid.

Try this one on your own!

Use blocks to construct a similar solid.

Page 17: Views of Solids Geometry D. Sketching the views of the solid. First, use blocks to construct a similar solid to the one shown at the left.

Sketch the 3d corner view.

Page 18: Views of Solids Geometry D. Sketching the views of the solid. First, use blocks to construct a similar solid to the one shown at the left.

Sketch the 3d corner view.

Page 19: Views of Solids Geometry D. Sketching the views of the solid. First, use blocks to construct a similar solid to the one shown at the left.

Sketch the right side view.

Page 20: Views of Solids Geometry D. Sketching the views of the solid. First, use blocks to construct a similar solid to the one shown at the left.

Sketch the right side view.

Page 21: Views of Solids Geometry D. Sketching the views of the solid. First, use blocks to construct a similar solid to the one shown at the left.

Sketch the front view.

Page 22: Views of Solids Geometry D. Sketching the views of the solid. First, use blocks to construct a similar solid to the one shown at the left.

Sketch the front view.

Page 23: Views of Solids Geometry D. Sketching the views of the solid. First, use blocks to construct a similar solid to the one shown at the left.

Sketch the left side view.

Page 24: Views of Solids Geometry D. Sketching the views of the solid. First, use blocks to construct a similar solid to the one shown at the left.

Sketch the left side view.

Page 25: Views of Solids Geometry D. Sketching the views of the solid. First, use blocks to construct a similar solid to the one shown at the left.

Sketch the back view.

Page 26: Views of Solids Geometry D. Sketching the views of the solid. First, use blocks to construct a similar solid to the one shown at the left.

Sketch the back view.

Page 27: Views of Solids Geometry D. Sketching the views of the solid. First, use blocks to construct a similar solid to the one shown at the left.

Sketch the top view.

Page 28: Views of Solids Geometry D. Sketching the views of the solid. First, use blocks to construct a similar solid to the one shown at the left.

Sketch the top view.

Page 29: Views of Solids Geometry D. Sketching the views of the solid. First, use blocks to construct a similar solid to the one shown at the left.

Given each view:

• Use the blocks to make the solid• Draw the 3d corner view of the

solid

Page 30: Views of Solids Geometry D. Sketching the views of the solid. First, use blocks to construct a similar solid to the one shown at the left.

Practice #1 Views:

Top Front

RightLeft

Page 31: Views of Solids Geometry D. Sketching the views of the solid. First, use blocks to construct a similar solid to the one shown at the left.

Practice #1 Corner View

Page 32: Views of Solids Geometry D. Sketching the views of the solid. First, use blocks to construct a similar solid to the one shown at the left.

Practice #1 Corner View

Page 33: Views of Solids Geometry D. Sketching the views of the solid. First, use blocks to construct a similar solid to the one shown at the left.

PolyhedronsPyramid Prism

Cone

Sphere

Cylinder


Integrals over irregular regions Change of order of integration Solid angle Sketching surfaces

Integrals over irregular regions Change of order of integration Solid angle Sketching surfaces

dspace.lzuu.ltdspace.lzuu.lt/bitstream/1/3575/1/38116.pdf · MULTIVIEW SKETCHING Introduction-Justification and Some Characteristics Glass Box Theory Alignment of Views Transfer of

dspace.lzuu.ltdspace.lzuu.lt/bitstream/1/3575/1/38116.pdf · MULTIVIEW SKETCHING Introduction-Justification and Some Characteristics Glass Box Theory Alignment of Views Transfer of

Blueprint Reading and Sketching - Construction … CHAPTER PAGE 1. Blueprint Reading 1-1 2. Technical Sketching 2-1 3. Projections and Views 3-1 4. Machine Drawings 4-1 5. Piping Systems

Blueprint Reading and Sketching - Construction … CHAPTER PAGE 1. Blueprint Reading 1-1 2. Technical Sketching 2-1 3. Projections and Views 3-1 4. Machine Drawings 4-1 5. Piping Systems

Sketching preview

Sketching preview

Sketching clouds...

Sketching clouds...

Embedding and Sketching Sketching for streaming

Embedding and Sketching Sketching for streaming

Pencil sketching

Pencil sketching

Graf Sketching

Graf Sketching

03 sketching

03 sketching

1. Missing Line Sketching problems. Sketch the given views ...mrslaing.weebly.com/uploads/2/2/1/3/22139340/iso_act_2.pdf · Hall PP 168-170 1. Missing Line Sketching problems. Sketch

1. Missing Line Sketching problems. Sketch the given views ...mrslaing.weebly.com/uploads/2/2/1/3/22139340/iso_act_2.pdf · Hall PP 168-170 1. Missing Line Sketching problems. Sketch

Sketching Paris...

Sketching Paris...

8. 1- Sketching Views of Objects (pp. 434-440)€¦ · 8. 1- Sketching Views of Objects (pp. 434-440) To draw the views of an object: • Place the top view above the front view,

8. 1- Sketching Views of Objects (pp. 434-440)€¦ · 8. 1- Sketching Views of Objects (pp. 434-440) To draw the views of an object: • Place the top view above the front view,

Activity 2.1 Isometric Sketching - The Classroom · Web viewIn this activity, you will develop your isometric sketching skills by first drawing isometric views of objects that are

Activity 2.1 Isometric Sketching - The Classroom · Web viewIn this activity, you will develop your isometric sketching skills by first drawing isometric views of objects that are

GE 121 – Engineering Design - 2009 Engineering Design GE121 SECTION VIEWS Drawing and Sketching (Continued) Lecture 13B.

GE 121 – Engineering Design - 2009 Engineering Design GE121 SECTION VIEWS Drawing and Sketching (Continued) Lecture 13B.

Corbu's Sketching

Corbu's Sketching

Sketching & Prototyping

Sketching & Prototyping

3D Sketching in Solid Edge ST7 - Siemens PLM Communitycommunity.plm.automation.siemens.com/siemensplm/attachments... · 3D Sketching in Solid Edge ST7 Rahul Kulkarni, ... plant. Rahul

3D Sketching in Solid Edge ST7 - Siemens PLM Communitycommunity.plm.automation.siemens.com/siemensplm/attachments... · 3D Sketching in Solid Edge ST7 Rahul Kulkarni, ... plant. Rahul

sketching - Technical University of Denmarkcourses.compute.dtu.dk/02289/2020/streaming/sketching-1x...• Sketching • CountMin sketch Today Sketching • Sketching. create compact

sketching - Technical University of Denmarkcourses.compute.dtu.dk/02289/2020/streaming/sketching-1x...• Sketching • CountMin sketch Today Sketching • Sketching. create compact

COMPARING EFFECTIVENESS OF SKETCHING PROCEDURES 1 Running head: SKETCHING … · 2018. 10. 18. · technique is sketching. Sketching involves an interviewee drawing details of a witnessed

COMPARING EFFECTIVENESS OF SKETCHING PROCEDURES 1 Running head: SKETCHING … · 2018. 10. 18. · technique is sketching. Sketching involves an interviewee drawing details of a witnessed

Exercise: Sketching Orthographic Views - Bellevue … Community College Interior Design 160: GRAPHIC COMMUNICATION FOR DESIGN Sketching Orthographic Views (from Muller, E. Reading

Exercise: Sketching Orthographic Views - Bellevue … Community College Interior Design 160: GRAPHIC COMMUNICATION FOR DESIGN Sketching Orthographic Views (from Muller, E. Reading