Viega_G3_INT_K_2013

Piping systems/Pipe connection technologyG3 Sanpress with SC-Contur

G3

206

Stainless steel pipe system with press connection technology for drinking water installation in accordance with DIN 1988, tested in accordance with DVGW regulation W 534, with DVGW system test mark. Dimensionally stable for quick and clean installation of drinking water installations of cellar, rising and floor mains. Cold worked connections in seconds, bringing all the advantages arising from that. No connection areas involving soldering or welding, therefore no fire dangers particularly important with sanitation work. Sanpress connectors have a SC-Contur this is a function on the crimp of the press connector, which shows a penetration of water at the unpressed connection while filling the installation. The SC-Contur is certified and meets the requirements of the DVGW regulation W 534, point 12.14, connectors with forced leakage. Extensive pipe connection range for various installation and connection combinations. Size of connectors: 12, 15, 18, 22, 28, 35, 42 and 54 mm as well as 76,1, 88,9 and 108,0 mm. Gunmetal pipe connectors and pipes made of non-corroding steel (stainless steel), material-no. 1.4401 and 1.4521 in accordance with EN 10088 offer a maximum of safety against corrosion damages. Pipe connectors in accordance with DVGW regulation W 534.

The electro-hydraulic press tools as well as the mains-inde-pendent battery press tools create non removable permanent joints after actuation. Application fields Sanpress:

Drinking water Rain water Fire-fighting water installation Compressed air installation Shipbuilding Agriculture Industrial facility

Please take the maximum working temperatures/working pressures out of the technical documentation. Besides the application in the domestic and industry technology Sanpress can also be used in the industrial structure and terotechnology. Sanpress offers also fittings, which are free of lacquer disturbing materials, for the industrial terotechnology where these high requirements are demanded. (Please contact the Attendorn factory for more information.) Attention: We optimize the Sanpress-Connectors continuously. The modifications in Z- and L-measure data took place stepwise. The construction measure data is in the updated Sanpress-Z-measure catalogue.

207

Sanpress with SC-Contur G3

Pipes and pipe elbows 208 Elbows 210 T-pieces 213 Adaptors and sleeves 214 Screw fittings, caps and flanges 218 Fitting connections, mounting units and sound absorbers 222 Smartloop inliner technology: internal circulation pipes and accessories 225 Gunmetal shut-off valves 227 Gunmetal ball valves 228 Concealed free-flow and concealed straight seat valves 228 Tools and miscellaneous 229 Sealing elements 230

Index

EAN-Code The EAN-Code composed out of the constant manufacturer number 4015211 and a six-digit article code - in this example 305611. The exchange of the last six digits against the article code shows the EAN-Code.

G3

208

Pipes and pipe elbows

Sanpress Pipe1.4521 - for drinking water installation - non-corroding steel - laser welded

Model 2205

d s L [m] PU Article

12 1 6 60 615 987 15 1 6 600 615 994 18 1 6 240 616 007 22 1,2 6 420 616 014 28 1,2 6 240 616 021 35 1,5 6 180 616 038 42 1,5 6 120 616 045 54 1,5 6 60 616 557

Sanpress XL Pipe1.4521 - for drinking water installation - non-corroding steel - laser welded

Model 2205XL


76,1 2 6 30 616 571 88,9 2 6 30 616 588

108,0 2 6 30 616 595

Sanpress Pipe1.4401 - for drinking water installation, gas installation

- non-corroding steel - laser welded

Model 2203


12 1 6 60 297 824 15 1 6 600 102 036 18 1 6 240 289 034 22 1,2 6 420 102 708 28 1,2 6 240 104 924 35 1,5 6 180 108 588 42 1,5 6 120 113 001 54 1,5 6 60 193 676

Sanpress XL Pipe1.4401 - for drinking water installation, gas installation

- non-corroding steel - laser welded

Model 2203XL


76,1 2 6 30 354 862 88,9 2 6 30 354 855

108,0 2 6 30 354 848

Sanpress Pipe elbow 15 - non-corroding steel - plug-in end

Model 2209.4

d PU Article

15 5 594 459* 18 5 594 466* 22 5 594 473* 28 5 594 480* 35 5 594 497* 42 1 594 503* 54 1 594 510*

*= Delivery just out of stock

Sanpress XL Pipe elbow 15 - non-corroding steel - plug-in end

Model 2209.4XL

d PU Article

76,1 1 594 534* 88,9 1 594 541* 108,0 1 594 558*


209


d PU Article

15 5 594 565* 18 5 594 572* 22 5 594 589* 28 5 594 596* 35 5 594 602* 42 1 594 619* 54 1 594 626*



Model 2209.5

G3


Model 2209.5XL

d PU Article

76,1 1 594 640* 88,9 1 594 657* 108,0 1 594 664*



Model 2209.1

d PU Article

18 5 288 990* 22 5 157 364* 28 5 157 548* 35 5 163 433* 42 1 164 140* 54 1 193 737*



Model 2209.1XL

d PU Article

76,1 1 594 688* 88,9 1 594 695* 108,0 1 594 701*



Model 2209.6

d PU Article

15 5 594 718* 18 5 594 725* 22 5 594 732* 28 5 594 749* 35 5 594 756* 42 1 594 763* 54 1 594 770*



Model 2209.6XL

d PU Article

76,1 1 594 794* 88,9 1 594 800* 108,0 1 594 817*



Model 2209.7

d PU Article

15 5 594 824* 18 5 594 831* 22 5 594 848* 28 5 594 855* 35 5 594 862* 42 1 594 879* 54 1 594 886*


210

Elbows


Model 2209.7XL

d PU Article

76,1 1 594 909* 88,9 1 594 916* 108,0 1 594 923*



Model 2209

d PU Article

18 5 288 976* 54 1 193 799*



Model 2209XL

d PU Article

76,1 1 594 947* 88,9 1 594 954* 108,0 1 594 961*


Sanpress Crossover - non-corroding steel - plug-in end

Model 2209.3

d PU Article

22 5 193 331

Sanpress Elbow 90with SC-Contur - gunmetal - press connection

ComponentsEPDM sealing elements

Model 2216

d PU Article

12 5 298 340 15 5/100 103 750 18 5 281 267 22 5 104 818 28 5/50 106 348 35 5 111 953 42 1 119 560 54 1 199 395

Sanpress XL Elbow 90with SC-Contur - gunmetal - press connection

ComponentsEPDM sealing elements, cutting rings

Model 2216XL

d PU Article

76,1 1 350 697 88,9 1 350 680 108,0 1 350 703

Sanpress Elbow 90with SC-Contur - gunmetal - press connection, plug-in end

ComponentsEPDM sealing element

Model 2216.1

d PU Article

15 5 107 932 18 5 281 298 22 5 108 120 28 5 115 159 35 5 117 603 42 1 130 497 54 1 191 221

211


G3

Sanpress XL Elbow 90with SC-Contur - gunmetal - plug-in end, press connection

ComponentsEPDM sealing element, cutting ring

Model 2216.1XL

d PU Article

76,1 1 353 650 88,9 1 353 667 108,0 1 353 674

Sanpress Elbow 45with SC-Contur - gunmetal - press connection


Model 2226

d PU Article

15 5 113 186 18 5 281 533 22 5/50 112 004 28 5 111 670 35 5 116 156 42 1 128 531 54 1 197 506

Sanpress XL Elbow 45with SC-Contur - gunmetal - press connection


Model 2226XL

d PU Article

76,1 1 351 342 88,9 1 351 359 108,0 1 351 366

Sanpress Elbow 45with SC-Contur - gunmetal - press connection, plug-in end


Model 2226.1

d PU Article

15 5 109 332 18 5 281 564 22 5 110 949 28 5 113 346 35 5 121 594 42 1 134 471 54 1 191 825

Sanpress XL Elbow 45with SC-Contur - gunmetal - plug-in end, press connection


Model 2226.1XL

d PU Article

76,1 1 353 681 88,9 1 353 698 108,0 1 353 704

Sanpress Adapter elbow 90with SC-Contur - gunmetal - press connection, R-thread

ComponentsEPDM sealing element, polygon

Model 2214

d R PU Article

12 5 290 863 12 5 290 870 14 5 444 006 15 5 314 361 15 5 112 950 15 5 443 030 16 5 444 013 18 5 281 205 18 5 314 354 22 5 115 623 28 1 5 118 730 35 1 5 127 329 42 1 1 128 500 54 2 1 197 988

212

Sanpress Adapter elbowwith SC-Contur - gunmetal - press connection, R-thread


Model 2214.1

d R PU Article

15 5 335 281

Sanpress Plug-in elbow 90 - gunmetal - plug-in end, Rp-thread

Model 2214.3

d Rp PU Article

15 5 308 001

Sanpress Adapter elbowwith SC-Contur - gunmetal - press connection, Rp-thread


Model 2214.2

d Rp PU Article

12 5 290 924 12 5 290 931 14 5 444 020 15 5 298 241 15 5 108 441 15 5 314 385 16 5 444 037 18 5 281 236 18 5 298 227 22 5 298 234 22 5 283 711 22 1 5 314 378 28 5 442 033 28 5 446 611 28 1 5 283 728 35 1 5 283 704 42 1 1 299 415 54 2 1 299 422

213


VdS d1 d2 d3 PU Article

12 15 12 5 313 630 15 12 15 5 298 371 15 15 15 5 106 614 15 18 15 5 313 647 15 22 15 5 298 388 18 12 18 5 314 040 18 15 15 5 281 397 18 15 18 5 281 403 18 18 18 5 281 410 18 22 18 5 298 395 22 12 22 5 314 071 22 15 15 5 121 600 22 15 18 5 298 432 22 15 22 5 109 165 22 18 18 5 298 401 22 18 22 5 281 380 22 22 15 5 298 418 22 22 22 5 109 257 22 28 22 5 313 623 28 15 28 5 283 513 28 18 22 5 314 101 28 18 28 5 298 425 28 22 22 5 135 102 28 22 28 5 111 625 28 28 15 5 314 132 28 28 18 5 314 163 28 28 28 5 111 915 35 15 35 5 283 520 35 18 35 5 313 616 35 22 28 5 314 194 35 22 35 5 113 469 35 28 28 1 121 754 35 28 35 5 118 341 35 35 35 5 115 265 42 15 42 1 314 224 42 22 42 1 283 537 42 28 42 1 283 544 42 35 35 1 283 551 42 35 42 1 120 672 42 42 42 1 121 259 54 22 54 1 195 991 54 28 54 1 283 568 54 35 54 1 197 469 54 42 42 1 187 279 54 42 54 1 198 541 54 54 54 1 199 364

VdS= VdS certification

Sanpress T-piecewith SC-Contur - gunmetal - press connection


Model 2218

T-pieces

G3

Sanpress XL T-piecewith SC-Contur - gunmetal - press connection


Model 2218XL

d1 d2 d3 PU Article

76,1 54 76,1 1 354 398 76,1 76,1 76,1 1 350 628 88,9 54 88,9 1 354 404 88,9 76,1 88,9 1 354 411 88,9 88,9 88,9 1 350 635

108,0 54 108,0 1 354 428 108,0 76,1 108,0 1 354 435 108,0 88,9 108,0 1 354 442 108,0 108,0 108,0 1 350 642

214

Adaptors and sleeves

Sanpress T-piecewith SC-Contur - gunmetal - press connection, R-thread


Model 2217.1

d1 R d2 PU Article

18 18 5 281 328 22 22 5 194 123 28 28 5 194 130 35 35 5 194 147 42 42 1 273 231 54 54 1 197 858 54 1 54 1 310 929 54 1 54 1 310 936

Sanpress T-piecewith SC-Contur - gunmetal - press connection, Rp-thread

ComponentsEPDM sealing elements, polygon

Model 2217.2

VdS d1 Rp d2 PU Article

12 12 5 290 986 15 15 5 313 951 15 15 5 115 630 18 18 5 281 359 22 22 5 115 944 22 22 5 313 975 28 28 5 119 768 28 28 5 313 968 35 35 5 121 945 35 1 35 1 361 204 42 42 1 126 230 42 1 42 1 361 211 54 54 1 197 353 54 1 54 1 361 228


Sanpress XL T-piecewith SC-Contur - gunmetal - press connection, Rp-thread


Model 2217.2XL

d1 Rp d2 PU Article

76,1 76,1 1 354 572 76,1 2 76,1 1 351 434 88,9 88,9 1 354 589 88,9 2 88,9 1 351 441 108,0 108,0 1 354 596 108,0 2 108,0 1 352 097

Sanpress Adapterwith SC-Contur - gunmetal - press connection, R-thread


Model 2211

VdS d R PU Article

12 5 290 771 12 5 290 764 14 5 443 689 14 5 443 696 15 5 297 985 15 5/100 105 044 15 5 287 764 16 5 443 702 16 5 443 719 18 5 283 490 18 5 283 230 22 5 297 961 22 5 104 306 22 1 5 287 771 28 5 297 954 28 1 5 106 508 28 1 5 297 978 35 1 5 297 947 35 1 5 110 352 35 1 5 314 651 42 1 5 297 930 42 1 1 115 340 54 1 1 314 668 54 2 1 195 267


215


G3

Sanpress XL Adapterwith SC-Contur - gunmetal - press connection, R-thread


Model 2211XL

d R PU Article

76,1 2 1 350 659 88,9 3 1 350 666 108,0 4 1 350 673

Sanpress Adapterwith SC-Contur - gunmetal - press connection, Rp-thread


Model 2212

VdS d Rp PU Article

12 5 291 075 12 5 291 068 14 5 443 726 15 5 298 074 15 5 107 543 15 5 298 098 16 5 443 733 18 5 283 483 18 5 294 519 22 5 298 067 22 5 108 465 22 1 5 298 128 28 5 428 174 28 5 298 081 28 1 5 114 329 28 1 5 298 104 35 5 357 542 35 1 5 298 111 35 1 5 116 774 42 1 1 298 050 42 1 1 124 236 54 1 1 365 097 54 2 1 195 304


Sanpress Adapterwith SC-Contur - gunmetal - press connection, Rp-thread

ComponentsEPDM sealing element, anti-twist protection

Model 2212.3

d Rp PU Article

15 5 287 016 18 5 298 913 22 5 287 009

Sanpress Adapterwith SC-Contur - gunmetal - press connection, Rp-thread - sound decoupling

ComponentsEPDM sealing element, sound decoupling panels

Model 2212.4

d Rp PU Article

18 5 335 021*


Sanpress Plug-in piece - gunmetal - plug-in end, R-thread

Componentspolygon

Model 2211.1

d R PU Article

12 5 291 310 15 5 115 418 18 5 285 081 18 5 285 104 22 5 119 676 22 5 116 767 28 1 5 122 034 35 1 5 125 288 42 1 1 132 231

216

Sanpress Plug-in piece - gunmetal - plug-in end, Rp-thread

Componentspolygon

Model 2212.1

d Rp PU Article

12 5 291 341 15 5 117 733 18 5 287 085 18 5 287 108 22 5 120 917 22 5 117 481 28 5 130 954 28 1 5 122 942 35 1 5 134 730 35 1 5 130 589 42 1 1 135 430 54 2 1 199 104

Sanpress Sleevewith SC-Contur - gunmetal - press connection


Model 2215

d PU Article

12 5 308 636 15 5 107 727 18 5 282 660 22 5 108 090 28 5 108 618 35 5 114 930 42 1 116 835 54 1 215 835

Sanpress XL Sleevewith SC-Contur - gunmetal - press connection


Model 2215XL

d PU Article

76,1 1 350 598 88,9 1 350 604 108,0 1 350 611

Sanpress Sliding sleevewith SC-Contur - gunmetal - press connection


Model 2215.5

VdS d PU Article

15 5 119 485 18 5 287 061 22 5 119 041 28 5 122 133 35 5 124 335 42 1 131 494 54 1 216 153


Sanpress Sliding sleevewith SC-Contur - gunmetal - plug-in end, press connection


Model 2215.4

d PU Article

22 5 588 533 28 5 588 540 35 5 588 557

Sanpress XL Sliding sleevewith SC-Contur - gunmetal - press connection


Model 2215.5XL

d PU Article

76,1 1 353 315 88,9 1 353 322 108,0 1 353 339

217


G3

Sanpress Reducerwith SC-Contur - gunmetal - plug-in end, press connection


Model 2215.1

d1 d2 PU Article

15 12 5 298 302 18 12 5 287 344 18 15 5 287 375 22 12 5 366 865 22 15 5 108 250 22 18 5 287 337 28 15 5 288 228 28 18 5 298 319 28 22 5 109 974 35 22 1 115 753 35 28 5 116 934 42 22 5 287 368 42 28 1 124 489 42 35 1 122 775 54 22 1 287 351 54 28 1 194 239 54 35 1 194 222 54 42 1 198 879

Sanpress XL Reducerwith SC-Contur - gunmetal - plug-in end, press connection


Model 2215.1XL

d1 d2 PU Article

76,1 54 1 354 664 88,9 54 1 354 671 88,9 76,1 1 354 688 108,0 54 1 354 695 108,0 76,1 1 354 701 108,0 88,9 1 354 718

Sanpress Adapterwith SC-Contur - for steel pipe to Viega press systems

- gunmetal - compression fitting, press connection

Componentspolygon, clamping ring, EPDM sealing element, union nut screw fitting, spacer ring

Model 2215.6

DN d PU Article

25 28 1 588 564 32 35 1 588 328

Sanpress Adapterwith SC-Contur - for Sanfix- or Sanfix Plus- PE-Xc pipe, press connection for Sanpress, Sanpress Inox, Profipress

- gunmetal - press connection, compression fitting

ComponentsEPDM sealing element, polygon, union nut screw fitting, clamping ring

Model 2213

d1 d2 PU Article

16 15 5 288 068 20 15 5 298 876 20 18 5 298 883

with SC-Contur - for all Viega metallic systems - gunmetal - press connection, plug-in end

Model 2113

d1 d2 PU Article

16 15 10 303 822 16 18 10 303 815 20 18 5 331 528 20 22 5 304 744 25 22 5 566 678 32 28 5 566 685 40 35 1 566 692 50 42 1 566 708

218

Screw fittings, caps and flanges

Raxofix Plug-in piecewith SC-Contur - for all Viega metallic systems - gunmetal - press connection, plug-in end

Model 5313

d1 d2 PU Article

16 15 5 646 554 16 18 5 646 561 20 18 5 646 578 20 22 5 646 585 25 22 5 646 592 32 28 5 646 608 40 35 1 646 615 50 42 1 646 622

Sanpress Adapterwith SC-Contur - for all Viega metallic systems - gunmetal - press connection


Model 2213P

d1 d2 PU Article

16 15 5 317 423 16 18 5 317 447 20 15 5 317 430 20 18 5 317 454 20 22 5 317 508 25 22 1 605 490 32 28 1 605 506 40 28 1 605 513 40 35 1 605 520

Raxofix Adapterwith SC-Contur - for all Viega metallic systems - gunmetal - press connection


Model 5313P

d1 d2 PU Article

16 15 5 646 707 16 18 5 646 714 20 15 5 646 721 20 18 5 646 738 20 22 5 646 745 20 22 1 646 752 32 28 1 646 769 40 28 1 646 776 40 35 1 646 783 50 35 1 646 790

Sanpress Screw fittingwith SC-Contur - gunmetal - press connection - flat sealing

ComponentsEPDM sealing elements, EPDM flat seal, union nut screw fitting, polygon

Model 2260

d PU Article

12 5 293 017 15 1 126 148 18 1 287 436 22 1 126 124 28 1 124 311 35 1 130 947 42 1 132 446 54 1 226 329

Sanpress Adapter unionwith SC-Contur - gunmetal - press connection, Rp-thread - flat sealing

ComponentsEPDM sealing element, EPDM flat seal, union nut screw fitting, polygon

Model 2262

d Rp PU Article

12 5 293 024 15 1 131 937 15 1 133 160 18 1 283 384 18 1 314 910 22 1 125 318 22 1 1 133 900 28 1 365 103 28 1 1 128 975 35 1 1 138 875 42 1 1 141 745 54 2 1 222 017

219


G3

Sanpress Adapter unionwith SC-Contur - gunmetal - press connection, R-thread - flat sealing


Model 2265

d R PU Article

12 5 291 372 12 5 291 389 15 1 120 108 15 1 140 878 18 1 283 360 18 1 283 377 22 1 142 674 22 1 119 133 22 1 1 148 492 28 1 365 110 28 1 1 120 047 35 1 1 128 425 42 1 1 135 966 54 2 1 221 997

Sanpress Adapter unionwith SC-Contur - gunmetal - press connection, Rp-thread - flat sealing, angled


Model 2255

d Rp PU Article

12 5 292 980 15 5 125 660 18 5 283 469 18 5 283 452 22 5 122 614 22 1 5 132 637 28 1 5 128 159 35 1 5 132 729 42 1 1 139 872 54 2 1 221 676

Sanpress Connection screw fittingwith SC-Contur - gunmetal - press connection, G-thread - flat sealing

ComponentsEPDM sealing element, EPDM flat seal, union nut screw fitting

Model 2263

VdS d G PU Article

12 5 475 956 12 5 380 878 12 5 293 611 14 5 443 849 14 5 444 150 14 5 476 786 15 5 475 963 15 5 380 885 15 1 265 663 15 1 5 305 000 15 1 1 424 534 16 5 444 167 16 5 444 174 18 1 283 391 18 1 5 305 017 22 5 351 502 22 1 1 265 687 22 1 5 367 015 22 1 5 305 260 28 1 1 692 629 28 1 1 265 700 28 1 5 305 048 35 1 1 265 731 35 2 5 305 024 42 1 1 265 304 42 2 1 305 031 54 2 1 426 743 54 2 1 265 328 54 2 1 341 961 54 2 1 426 750


220

Sanpress XL Connection screw fittingwith SC-Contur - gunmetal - G-thread, press connection - flat sealing

ComponentsEPDM sealing element, EPDM flat seal, cutting ring, separator ring, union nut screw fitting

Model 2263XL

G d PU Article

3 76,1 1 365 127 3 88,9 1 365 134

Sanpress Connection screw fitting - gunmetal - plug-in end, G-thread - flat sealing

ComponentsEPDM flat seal, union nut screw fitting

Model 2264

d G PU Article

15 5 338 503 18 5 338 510 22 1 5 338 527 28 1 5 338 534 35 1 5 338 541 42 1 1 338 558 54 2 1 338 565

Sanpress Insulating unionwith SC-Contur - gunmetal - Rp-thread, press connection - flat sealing

ComponentsEPDM sealing element, EPDM flat seal, union nut screw fitting, separator ring, polygon

Model 2267

Rp d PU Article

15 1 469 450 15 1 469 467 18 1 469 474 18 1 469 481 22 1 469 498 1 22 1 469 504 1 28 1 469 511

1 35 1 469 528 1 42 1 469 535 2 54 1 469 542

Forcing plug - for leakage test, temporarily closed pipe sections

- brass - compression fitting, hose connection for filling hose

ComponentsKFE tap, union nut screw fitting

Model 2269

d PU Article

15 1 141 523 18 1 289 423 22 1 140 557 28 1 142 568 35 1 144 111 42 1 144 999 54 1 187 798

Compensatorwith SC-Contur - for expansion equalisation in cellar or riser pipe, storey connection pipe in heating and sanitary technology

- gunmetal/stainless steel - press connection

ComponentsEPDM sealing elements, gunmetal press connectors, bellow made of stainless steel

Model 2251

d PU Article

15 1 690 250 18 1 690 267 22 1 690 274 28 1 690 281 35 1 690 298 42 1 690 304 54 1 690 311

NEW

Sanpress XL Capwith SC-Contur - gunmetal - press connection, Rp-thread


Model 2256XL

d Rp PU Article

76,1 1 353 377 88,9 1 353 384 108,0 1 353 391

221


G3

Protective cap - for pipe end - not suitable for leakage and pressure test

- plastic Model 2259.1

d PU Article

15 10 611 149 18 10 612 054 22 10 612 061 28 10 612 078 35 10 612 085 42 10 612 092 54 10 612 108

Protective cap - for pipe end - not suitable for leakage and pressure test

- plastic Model 2259.1XL

d PU Article

76,1 1 612 122 88,9 1 612 139 108,0 1 612 146

Sanpress Flange adapterwith SC-Contur - gunmetal - flange adapter, press connection

ComponentsEPDM sealing element, black powdered coated steel loose flange MOP 10/16, bracket

Model 2259.5

DN d PU Article

25 28 1 479 855 32 35 1 479 879 40 42 1 479 886 50 54 1 479 893

Sanpress XL Flange adapterwith SC-Contur - gunmetal - flange adapter, press connection

ComponentsEPDM sealing element, cutting ring, black powdered coated steel loose flange MOP 10/16, bracket

Model 2259.5XL

DN d PU Article

65 76,1 1 479 954 80 88,9 1 479 978

100 108,0 1 480 011

Mounting set - for flange connection - galvanised steel

Components4 screws, 8 washers, 4 nuts

Model 2259.7

DN MOP M L PU Article

25 16 12 65 1 494 056 32/50 16 16 70 1 494 063

Mounting set - for flange connection - galvanised steel

Components8 screws, 16 washers, 8 nuts

Model 2259.7XL

for DN MOP M L PU Article

80/100 6 16 60 1 651 268 65/100 16 16 70 1 494 087

Seal - AFM 34

Model 2259.9

DN MOP PU Article

25 16 10 409 128 32 16 10 409 135 40 16 10 409 142 50 16 10 409 258

Seal - AFM 34

Model 2259.9XL

DN MOP PU Article

65 16 10 356 293 80 16 10 356 309

100 16 10 356 316

222

Fitting connections, mounting units and sound absorbers

Sanpress Wall platewith SC-Contur - gunmetal - press connection, Rp-thread

ComponentsEPDM sealing element, connection angle for shortening, fixing flange

Model 2225

d Rp L PU Article

15 45 5/25 116 552


ComponentsEPDM sealing element, fixing flange

Model 2225.5

d Rp PU Article

12 5 291 013 14 5 444 044 15 5/100 107 345 16 5 444 556 18 5/50 281 502 18 5 335 236 22 5 335 229 22 5 116 057

Protective collar - for wall plate d16xRp - plastic

Model 2125.59

PU Article

10 351 496

Sanpress Double wall platewith SC-Contur - gunmetal - press connection, Rp-thread

ComponentsEPDM sealing elements, fixing flange

Model 2228.7

d1 Rp d2 PU Article

15 15 1 687 892 18 18 1 692 797 22 22 1 687 908

NEW

Sound absorber - suitable for Bracket model 2141.3, Raxofix Wall plate model 5325.5, Sanfix P Wall plate model 2125.5, Sanpress Wall plate model 2225.5

- rubber Model 2141.5

PU Article

1 586 713


ComponentsEPDM sealing element, spacer, fixing flange

Model 2225.6

d Rp PU Article

15 5 347 307

Sanpress Double wall platewith SC-Contur - gunmetal - press connection, Rp-thread

ComponentsEPDM sealing elements, fixing flange

Model 2225.7

d1 Rp d2 PU Article

15 15 1 644 857*


223


G3

Bracket - for masonry installation, pre-wall installation

- galvanised steel - sound decoupling

Componentssound decoupler

Model 2021.7

DG PU Article

70/150 1 651 350

DG= depth gauge

Bracket - for wall plate fixing - galvanised steel - sound decoupling, variable gauge for boreholes

Componentsrubber panel set

Model 2141.3

DG (range) PU Article

80150 1 581 701

DG (range)= depth gauge

Bracket - for lateral fixing - suitable for Bracket model 2141.3, Mounting unit model 2141

- galvanised steel Model 2141.4

PU Article

1 586 706

Drain elbow 90 - for fastener with fitting holder of Viega Mono concealed fitting pre-wall block - suitable for Fitting holder model 8063.3, Viega Mono Fitting block model 8313.5 - plastic

Componentsbracket, WB pre-wall clip, rubber nipple DN40/30, plug

Model 2125.9

DN PU Article

40/50 1 329 730

Sanpress Wall bushingwith SC-Contur - gunmetal - press connection, Rp-thread, G-thread

- angledComponents

EPDM sealing element Model 2232.1

d Rp G L PU Article

15 25 5 279 301 15 35 5 279 318 15 55 5 279 288 15 65 5 279 295

Sanpress Wall bushingwith SC-Contur - gunmetal - press connection, Rp-thread, G-thread


Model 2232.3

d Rp G L PU Article

15 30 5 325 060

Anti-twist protection - for wall bushing - galvanised steel

Model 2132

PU Article

25 344 931

224

Mounting set - for wall bushing - G-thread

Model 1526.414-897

SW G PU Article

29 1 104 887

Sanpress Mounting unitwith SC-Contur - press connection, Rp-thread - long on one side

ComponentsEPDM sealing element, galvanised steel (flat) bracket, long gunmetal elbow (can be shortened)

Model d Rp L DG PU Article

2221 15 45 150/200 1 124 502 2221.1 15 45 80/100 1 135 119

DG= depth gauge

Sanpress Mounting unitwith SC-Contur - press connection, Rp-thread

ComponentsEPDM sealing element, short gunmetal elbow, galvanised steel (offset) bracket

Model d Rp DG PU Article

2222 15 150 10 295 462 2222.6EX 12 120 1 357 351

DG= depth gauge


ComponentsEPDM sealing element, short gunmetal elbow, galvanised steel (flat) bracket

Model 2222.05

d Rp DG PU Article

15 150 1 308 681

DG= depth gauge


ComponentsEPDM sealing element, short gunmetal elbow, galvanised steel (flat) bracket

Model 2222.2

d Rp DG PU Article

15 100 1 308 674

DG= depth gauge

Silenta Sound absorber - for wall plate - rubber

Componentsbracket for wall-mounting

Model 1412.891

for d Rp PU Article

15/18 5 104 801 22 5 126 384

225


Smartloop inliner technology: internal circulation pipes and accessories

G3

Silenta Sound absorber - suitable for Sanpress Mounting unit model 2221

- rubberComponents

bracket for wall-mounting Model 1415

DG PU Article

150/200 5 123 345

DG= depth gauge

Sanpress Mounting unitwith SC-Contur - for diaphragm expansion tanks - press connection, Rp-thread

ComponentsEPDM sealing element, screw fitting, gunmetal T-piece, galvanised steel (flat) bracket

Model 2218.4

d1 Rp d2 PU Article

22 22 1 625 078

Mounting unit - for Junkers-Gas combination boilers - press connection, Rp-thread

Componentsgas connection angle with threaded connection all other elbows with press connection, short gunmetal elbow, EPDM sealing elements, leaking water connection, galvanised steel (offset) bracket

NoteWhen gas connection Rp or Rp1 is required, please replace the Rp elbow!

Model 2229

Rp PU Article

1 309 398

Connection elbow - suitable for Mounting unit model 2229

- gunmetal/brass - Rp-thread

Model 94477.0-713

Rp PU Article

1 374 570 1 1 489 298 21 1 138 066 2

1) gunmetal2) brass

Smartloop Connection set - for hot water pipe with internal circulation pipe, hot water pipe from d28, circulation pipe d15

- suitable for Smartloop Pipe model 2007.3

- gunmetalComponents

plug, connection screw fitting Model 2276.1

d1 d2 PU Article

28 12 1 470 289 35 12 1 470 272

28/35 12 1 632 229

Smartloop Pipe - for internal circulation pipe - suitable for Smartloop Connection set model 2276.1

Model 2007.3


12 1 75 75 650 032

226

Smartloop Tension coupling - for installation of the internal circulation pipe


Model 2276.9

for d PU Article

12 1 632 236

Smartloop Coupling - for repair of the internal circulation line


- gunmetal Model 2276.8

for d PU Article

12 1 643 188

Shears - for PE-Xc pipe, Smartloop pipe - steel

Model 2040

for d PU Article

1225 1 117 047

Mounting pliers - steel

Model 1077.2

for d PU Article

1216 1 264 604

Hand press tool - for PE-Xc-System, PB system

Model 2782

for d PU Article

12 1 401 436

Press jaw - phosphatised steel - Recommended for press tools PT2, PT3H, PT3-AH, PT3-EH and Pressgun 4E and 4B, battery-powered press tool manufactured by Holger Clasen, Geberit/Mepla press tools type PWH 75, type N 230 V and type N battery, Geberit/Mapress press tools type EFP II, ACO 1, ECO 1, ACO 201, ECO 201, AFP 201, EFP 201, ACO 202 and ECO 202, Ridgid press machines RP 10-S, RP 10-B, RP 330C and RP 330B

Model 2799.7

for d FP S PU Article

12 12 12 1 425 302

S= for SmartloopFP= for Fonterra press connectors

227


Gunmetal shut-off valves

G3

Easytop Slanted seat valvewith SC-Contur - press connection

Componentsvalve casing and top made of gunmetal in accordance with DIN 50930-6, valve seat made of stainless steel, spindle transmis-sion, position indication open/closed, handwheel with interchangeable medium mark green/red, drain plug G, EPDM sealing elements

Technical dataOperating pressure 16 bar ( MOP 16)Operating temp. max. 90 C

with DVGW-test mark Model 2237

DN d PU Article

15 15 5 457 051 15 18 5 457 068 20 22 5 457 075 25 28 5 457 082 32 35 1 457 099 40 42 1 457 105 50 54 1 457 129

Easytop CRV slanted seat valve(combined free-flow valve with backflow preventer), with SC-Contur - press connection

Componentsvalve casing and top made of gunmetal in accordance with DIN 50930-6, valve seat made of stainless steel, spindle transmis-sion, position indication open/closed, handwheel with interchangeable medium mark green/red, test connection, drain plug G, EPDM sealing elements



DN d PU Article

15 15 5 457 198 15 18 5 457 204 20 22 5 457 211 25 28 5 457 228 32 35 1 457 235 40 42 1 457 242 50 54 1 457 259

Easytop Backflow preventerwith SC-Contur - press connection

Componentsvalve casing and top made of gunmetal in accordance with DIN 50930-6, valve seat made of stainless steel, test connection, drain plug G, EPDM sealing elements



DN d PU Article

15 15 5 471 019 15 18 5 471 026 20 22 5 471 033 25 28 5 471 040 32 35 1 471 156 40 42 1 471 163 50 54 1 471 170

228

Gunmetal ball valves

Concealed free-flow and concealed straight seat valves

Easytop Ball valvewith SC-Contur - press connection

Componentsgunmetal valve casing in accordance with DIN 50930, maintenance-free selector shaft, EPDM sealing elements



DN d PU Article

15 15 1 475 857 15 18 1 475 864 20 22 1 475 871 25 28 1 475 888 32 35 1 475 895 40 42 1 475 918 50 54 1 475 925

Easytop Ball valvewith SC-Contur - press connection, Rp-thread

Componentsgunmetal valve casing in accordance with DIN 50930, maintenance-free selector shaft, EPDM sealing element


with DVGW-test mark Model 2270.4

DN d Rp PU Article

15 15 1 587 147 15 18 1 587 154 20 22 1 587 161 25 28 1 1 587 178 32 35 1 1 587 185 40 42 1 1 587 192 50 54 2 1 587 208

Easytop Free flow valvewith SC-Contur - press connection

Componentsgunmetal valve casing in accordance with DIN 50930, plastic turning handle, EPDM sealing elements



d PU Article

15 1 606 312 18 1 606 329 22 1 606 336

Easytop Concealed free flow valvewith SC-Contur - press connection

Componentsvalve casing and top made of gunmetal in accordance with DIN 50930-6, upper part, bare brickwork protection, EPDM sealing elements

NoteAccessory sets for straight seat valves see group J1 (models 2236 and 2236.10)!


d ID PU Article

15 45130 1 606 343 18 45130 1 606 459 22 45130 1 606 466

ID= installation depth

229


Tools and miscellaneous

G3

Easytop Concealed straight seat valvewith SC-Contur - press connection

Componentsvalve casing and top made of gunmetal in accordance with DIN 50930-6, upper part, bare brickwork protection, EPDM sealing elements

NoteAccessory sets for straight seat valves see group J1 (models 2236 and 2236.10)!


DN d ID PU Article

15 15 45130 1 595 937 15 18 45130 1 595 944 20 22 45130 1 596 750 25 28 45130 1 596 767

ID= installation depth

Deburrer - for deburr internally and externally, copper pipe, stainless steel pipe, Prestabo pipe

- steel Model 2292.2

for d PU Article

1254 1 343 019

Deburrer - for deburr internally and externally, copper pipe, stainless steel pipe, Prestabo pipe

- steel Model 2292.4XL

for d PU Article

64,0108,0 1 556 310

Cutting wheel - steel

Componentsbolts, safety ring

Model PRi PRe PU Article

2291.1 1 140 410 2291.2 1 312 497

PRe= to the pipe cutter (Rems) (yellow)PRi= to the pipe cutter (Ridgid) (grey)

Insertion depth template - for marking the insertion depth of metallic pipes d12-54

Model 2494

PU Article

1 625 085

Marking pen - for Viega press systems

Model 2490.1

PU Article

1 606 121

230

Sealing elements

Sealing element - for applications with high tempera-tures e.g. district heating up to 140 C and 16 bar, low pressure steam units 120 C and < 1 bar solar installations/vacuum pipes

- FKMNote

Use in any other area of application requires consultation with our technical advice department!

Model 2286

for d internal s PU Article

12 12,1 2,35 5 459 376 15 15,1 2,6 5 459 390 18 18,2 2,6 5 459 406 22 22,2 3,1 5 459 413 28 28,3 3,1 5 459 420 35 35,4 3,25 5 459 437 42 42,4 4,13 5 459 444 54 54,4 4,13 1 459 451

Sealing element - for applications with high tempera-tures e.g. district heating up to 140 C and 16 bar, low pressure steam units 120 C and < 1 bar solar installations/vacuum pipes, Sanpress XL

- FKMNote

Use in any other area of application requires consultation with our technical advice department!

Model 2286XL


76,1 77 5 1 459 468 88,9 90 5 1 459 475

108,0 109 5 1 459 482

Sealing element - for drinking water installation, heating installation

- EPDM - temperature stability up to 110 C

Model 2289


15 15,1 2,6 10 183 400 18 18,2 2,6 10 281 595 22 22,2 3,1 10 183 523 28 28,3 3,1 10 184 452 35 35,4 3,25 10 181 208 42 42,4 4,13 10 184 940 54 54,4 4,13 10 191 153

Sealing element - for Sanpress XL, drinking water installation, heating installation

- EPDM - temperature stability up to 110 C

Model 2289XL


76,1 77 5 10 364 816 88,9 90 5 10 364 823

108,0 109 5 10 364 830

Viega_G3_INT_K_2013

Documents

Transcript of Viega_G3_INT_K_2013