170315

Video Integrations

Welcome

Roger NordDevelopment Engineer

Daniel ThompsonField Application and Support

Webinar control panel

Show/hide control panel

Full screen

Audio settings

View and enter questions

Topics

• Why video?• Supported alternatives• Choosing your video source• Discuss each supported alternative• Demo setup and features of a few cameras

Video Integrations

Why?

- Ease marker identification- Documentation- Recording/analysis of high speed video:

Gain more insight into movements

Alternatives

• External video cameras

– Webcam– HDMI via Blackmagic– Import video file

• Qualisys video cameras

– Oqus 510+ and Oqus310+– Oqus 210c– Miqus Video Mono

Choosing video source

Let the requirements decide:

• Image Quality (Resolution, Color/Monochrome)• Frame rate (normal or high speed)• Recording of sound for documentation• Synchronization with mocap data• Calibrated video for 3D overlay of mocap data

Documentation purposes: webcam or HDMI sufficientSynchronization, 3D overlay and high speed video: Qualisys video

Webcam

• Typically 1080p/30fps• Not possible to synchronize• Not possible to calibrate• Must support Microsoft DirectShow API

HDMI via Blackmagic Designs card

• DeckLink Mini Recorder– Internal PCIe interface– HDMI/SDI input– Supports up to 1080p/30fps– Sound capturing

• Intensity Pro 4K– Internal PCIe interface– HDMI/Component/S-Video/Composite input– Supports up to 2160p/30fps and 1080p/60fps– Sound capturing– Analog breakout cable

One camera per cardData is uncompressed, use compression in QTM

Oqus/Miqus Video Comparison

• asdfasdf

Calibrated Video

• Let QTM know where camera is located inthe measurement volume

• Enables video overlay• Flash only used during calibration

Oqus Video 210c

• Easy integration• 1080p/24fps• MJPEG Compression• Synchronized capture• Calibrated capture• Color sensor• Connected in the same daisy chain as

the motion capture cameras• Supported in Oqus systems• 1.125 GB buffer for HS video

~580 frames 1080p– Use QTM video compression

Miqus Video Mono

• Easy integration• 1080p/85fps, 720p/150fps• MJPEG Compression• Synchronized capture• Calibrated capture• Connected in the same daisy chain as

the motion capture cameras• Monochrome, approx 1 EV higher sensitivity• Supported in Miqus systems• Visible light flash, only used during calibration• No buffer

Oqus 510+/310+

• Regular mocap camera with buffer and possibility to remove IR-filter• Monochrome sensor• Frame rate same as marker• Only buffered video, no streaming

• Oqus 510+– 2048x2048 180 fps

• Oqus 310+– 1280x1024 500 fps

Demos

• Webcam– Video offset

• Blackmagic Design Intensity Pro 4K– Compression

• Oqus 210c– High speed Video

• Miqus Video Mono– 3D Overlay

Video Integrations

Recap

Documentation purposes: webcam or HDMI sufficientSynchronization, 3D overlay and high speed video: Qualisys video

WebcamDecklinkRecorder

IntensityPro4K Oqus510+ Oqus310+ Oqus210c

MiqusVideoMono

Resolution 1080p 1080p 2160p 2048x2048 1280x1024 1080p 1080pColor Yes Yes Yes No No Yes NoSound Yes Yes Yes No No No NoHighSpeed No No No Yes Yes Yes NoSynchronized No No No Yes Yes Yes YesCalibrated No No No Yes Yes Yes Yes

The End

Thanks for your attention!

Next webinar:Eye tracking + motion capture

May/June