VIBRATION ANALYSIS MADE EASY VIBRATION...
Transcript of VIBRATION ANALYSIS MADE EASY VIBRATION...
VIBRATION ANALYSIS MADE EASY VIBRATION ANALYSIS MADE SAFE
Learn More
Readings can be taken on running equipment from a
safe distance.
No tools required.
Reading of stroke gauge stickers is no
longer necessary
Results are clear and concise without
the need for interpretation
Home Contact Us Application Specifications Order Now
VIBRATION ANALYSIS MADE EASY VIBRATION ANALYSIS MADE SAFE
To learn more about any of the items below click on the item for information.
We are proud to announce the newly developed Syntechtron Wireless Vibration Meter.
The instrument is considered a breakthrough in Vibratory Feeder testing and Controller
calibration. It incorporates several diagnostic functions that are invaluable in determining
the appropriate course of action to restore Feeder-Controller operation to design
specifications. The versatile nature of the design allows for readings to be taken on a
variety of vibrating equipment including products outside the Syntechtron range.
The Syntechtron Wireless Vibration Meter comprises two parts. The hand held
instrument and the remote sensor unit. We consider this tool is an essential piece of
safety equipment allowing maintenance personnel to monitor the Feeder-Controller
status whilst keeping themselves at a safe distance from operating equipment.
The Wireless Vibration Meter kit comes with:
1. The hand held instrument
2. The removable magnetic remote sensor
3. A carry case
4. Operating and instruction manual
This kit is Syntechtron part number 047E0038.
Note: The bolt on remote sensor is not included and is to be ordered separately.
Demonstrations can be provided during our next site service or commissioning work.
All inquiries for the Syntechtron Wireless Vibration Meter are welcomed.
Make an enquiry now at: [email protected]
Home Contact Us Application Specifications Order Now
VIBRATION ANALYSIS MADE EASY VIBRATION ANALYSIS MADE SAFE
The Hand Held Meter The Wireless Vibration Meter can provide:
- Feeder Trough Stroke Indication (may be interpreted as a guide to Feeder TPH
output).
- Mechanical Frequency (Natural Frequency or N/F) of the Feeder two-mass system
(measured without product).
- Feeder Drive Stroke Indication (assist in assessing the mechanical condition of drive
unit).
- Line Frequency Indication (can be used to detect SCR failure).
This equipment offers an alternative to the stroke gauge indicator and Reed Box
readings. Both of which were previously relied upon for obtaining information and
required personnel to be on or very close to operating equipment. This new Wireless
Vibration Meter allows readings to be taken from a safe distance away from operating
equipment.
The digital display provides precise information, greatly reducing misdiagnosis of
Feeder/Controller problems. Powered by 4 AA replaceable batteries.
Home Contact Us Application Specifications Order Now
VIBRATION ANALYSIS MADE EASY VIBRATION ANALYSIS MADE SAFE
The Magnetic Sensor
The removable magnetic Sensor is the standard Sensor in the Wireless
Vibration Meter kit. The unit should be attached to the drive along the line
of action of the drive.
A small lanyard is included so that the Sensor can be tethered to the
Inertial Stroke Transducer cable to prevent loss of the sensor should the
magnetic grip be broken.
The Sensor has a battery life of up to 10 years depending upon usage.
Syntechtron recommend the Sensor be returned to Syntechtron for
battery replacement.
Home Contact Us Application Specifications Order Now
VIBRATION ANALYSIS MADE EASY VIBRATION ANALYSIS MADE SAFE
The Permanent Sensor The permanent Sensor is an additional Sensor to compliment the
Wireless Vibration Meter kit.
The unit can be permanently bolted to the Feeder wingplate, much like
the Syntechtron Inertial Stroke Transducer is. This option can be left
fixed to the plant and maintenance personnel can monitor the Feeder
without the need to isolate and attach a magnetic Sensor.
The Sensor has a battery life of up to 10 years depending upon usage.
Syntechtron recommend the Sensor be replaced when the battery has
expired.
One handheld Wireless Vibration Meter is capable of receiving signals
from multiple permanent sensors. A number of permanently fixed bolt on
sensors can be purchased for all your vibrating equipment. This is
particularly useful for machinery that is difficult to access.
For further information please contact Syntechtron at:
Home Contact Us Application Specifications Order Now
VIBRATION ANALYSIS MADE EASY VIBRATION ANALYSIS MADE SAFE
To learn more about any of the item below click on the item for information.
Specifications
W.V.M Kit Weight Length Width Depth
1.0 kg 250 mm 200 mm 95 mm
W.V.M Meter
Weight Length Width Depth
0.56 kg 220 mm 120 mm 45 mm
Magnet Transducer
Weight Length Width Depth
0.16 kg 110 mm 45 mm 45 mm
Bolt-On Transducer
Weight Length Width Depth
0.42 kg 115 mm 85 mm
60 mm + Detachable Aerial
Home Contact Us Application Specifications Order Now