Version 9 Release Notes - Black Box Corporationftp.blackbox.com/communications/iCompel/Player...
Transcript of Version 9 Release Notes - Black Box Corporationftp.blackbox.com/communications/iCompel/Player...
Version 9 Release Notes
INTRODUCTION
These release notes describe the features and limitations for the ICOMPEL software version 9.
Note: It is not possible to update AC4002, AC4003, AC4004, AC4005, ICOMP01, ICOMP02,
ICOMP03 & ICOMP04 models to V9.
NEW IN V9.3.7
The iCompel must be running V9.2.4, V9.2.5, V9.3.0, V9.3.1, V9.3.2, V9.3.4, V9.3.5 or V9.3.6
before updating to V9.3.7
Use NTB-update9-V9.3.7-44786.opf to update from V9.2.4, V9.3.0, V9.3.1, V9.3.2, V9.3.3,
V9.3.4, V9.3.5 or V9.3.6
ICOS models must be running V9.2.5, V9.3.2, V9.3.3, V9.3.4, V9.3.5 or V9.3.6 to use the
update.
New features:
Support added for ICKS-VE-KU-x & ICxS-2U revision 3 hardware platforms
Problems fixed:
Security fix for CVE-2014-0160 (aka "Heartbleed").
Fix issue that prevented update from V9.2.4 on some older iCompels
Prevent HTML player from filling system disk with temporary files
Translation Status:
The iCompel Web User Interface is fully supported in English. Translations are available in
other languages as detailed below.
Note:The Help and User Guide pages are supplied only in English.
The following languages have full translations in this release.
American English
Arabic
Brazilian
British English
French
German
Italian
Japanese
Korean
Portuguese
Russian
Simplified Chinese
Spanish
Thai
Traditional Chinese
Turkish
Known Limitations:
If the iCompel starts up with the HDMI or DisplayPort Audio selected but no screen connected
the audio will fall back to using the analog output. No warning is given in the UI that this has
happened. Connect the configured screen to the iCompel and reboot to resolve this.
The iCompel display may be distorted or damaged after using the Ctrl-Alt-F2 emergency
maintenance system (only for use under the guidance of Black Box Technical Support). A reboot
will restore proper operation.
HTML Player does not support Java Applets.
HTML Player cannot access FTP resources.
There is a limit to the total amount of text that can be drawn by a single text item.
The Web UI has some minor display issues under Windows Internet Explorer 6 (Apple Safari,
Mozilla Firefox, Windows Internet Explorer 7 or later do not have these issues).
The Web UI has some display issues under Windows Internet Explorer 7 when using Arabic.
When using the Windows 8 Modern UI version of Internet Explorer 10 (not the desktop version),
you may be repeatedly presented with prompts to enter a username and password. This is an
Internet Explorer bug; the workaround is to append a "?" to the end of the URL.
When uploading files using Apple Safari it is not possible to show a progress bar.
When booting ICPS-VE-x models on DVI or HDMI there will be a period of a few seconds
before the splash screen is seen.
The home page may show screen off after a reboot even though it is on. Refreshing the page will
show the current state of the display.
When using the emergency maintenance console (Ctrl-Alt-F2 and login as maint) to Factory
Reset Media, the iCompel will show "Loading inital ramdisk..." mid-operation. Press Ctrl-Alt-F2
to resume.
The Web UI has some display issues in Google Chrome.
Layout Packages created on the iCompel Content Commander and uploaded to an iCompel
Publisher will claim to require software version 1.1.0. This is the iCC version, not the Publisher
version.
Starting the iCompel with a USB storage device (flash stick, USB HDD) plugged in can cause
the iCompel to enter "emergency mode". Remove the USB storage device and reboot the
iCompel to fix this issue.
DETAILED VERSION IDENTIFICATION
The software release version described herein is comprised of a number of sub-packages. Each
sub-package has a build number - in parentheses.
Player Signage Applications V9.3.7 (44786)
Player System V9.3.7 (44786)
Player Web UI Applications V9.3.7 (44786)
The md5sum for this release's update OPF file is:
d9a02c6066eb2c044e80be45fa73d8fe NTB-update9-V9.3.7-44786.opf
NEW IN V9.3.5
The iCompel must be running V9.2.4, V9.2.5, V9.3.0, V9.3.1, V9.3.2, V9.3.4 or V9.3.4 before
updating to V9.3.5
Use NTB-update9-V9.3.5-44258.opf to update from V9.2.4, V9.3.0, V9.3.1, V9.3.2, V9.3.3 or
V9.3.4
ICOS models must be running V9.2.5, V9.3.2, V9.3.3 or V9.3.4 to use the update.
New features:
Support Romanian on the International page.
Problems fixed:
Publish to USB has been reinstated.
In some cases the credentials dialog was not displayed with the correct coloring.
Fixed problems with channels where the layout error is present.
Improved support for CPU temperatures on ICxS-VE models by implementing the latest Intel
BIOS.
Fixed XML API basic authentication option to apply to all documented APIs.
Fixed the issue of a missing Ad hoc Folder Mirror menu entry on iCompel subscribers.
Translation Status:
The iCompel Web User Interface is fully supported in English. Translations are available in
other languages as detailed below.
Note: The Help and User Guide pages are supported only in English.
The following languages have full translations in this release.
American English
Arabic
Brazilian
British English
French
German
Italian
Japanese
Korean
Portuguese
Russian
Simplified Chinese
Spanish
Thai
Traditional Chinese
Turkish
KNOWN LIMITATIONS
If the iCompel starts up with the HDMI or DisplayPort Audio selected but no screen connected
the audio will fall back to using the analog output. No warning is given in the UI that this has
happened. Connect the configured screen to the iCompel and reboot to resolve this.
The iCompel display may be distorted or damaged after using the Ctrl-Alt-F2 emergency
maintenance system (only for use under the guidance of Black Box Technical Support). A reboot
will restore proper operation.
HTML Player does not support Java Applets.
HTML Player cannot access FTP resources.
There is a limit to the total amount of text that can be drawn by a single text item.
The Web UI has some minor display issues under Windows Internet Explorer 6 (Apple Safari,
Mozilla Firefox, Windows Internet Explorer 7 or later do not have these issues).
The Web UI has some display issues under Windows Internet Explorer 7 when using Arabic.
When using the Windows 8 Modern UI version of Internet Explorer 10 (not the desktop version),
you may be repeatedly presented with prompts to enter a username and password. This is an
Internet Explorer bug; the workaround is to append a "?" to the end of the URL.
When uploading files using Apple Safari it is not possible to show a progress bar.
When booting ICPS-VE-x models on DVI or HDMI there will be a period of a few seconds
before the splash screen is seen.
The home page may show screen off after a reboot even though it is on. Refreshing the page will
show the current state of the display.
When using the emergency maintenance console (Ctrl-Alt-F2 and login as maint) to Factory
Reset Media, the iCompel will show "Loading inital ramdisk..." mid-operation. Press Ctrl-Alt-F2
to resume.
The Web UI has some display issues in Google Chrome.
Layout Packages created on the iCompel Content Commander and uploaded to an iCompel
Publisher will claim to require software version 1.1.0. This is the iCC version, not the Publisher
version.
Starting the iCompel with a USB storage device (flash stick, USB HDD) plugged in can cause
the iCompel to enter "emergency mode". Remove the USB storage device and reboot the
iCompel to fix this issue.
DETAILED VERSION IDENTIFICATION
The software release version described herein is comprised of a number of sub-packages. Each
sub-package has a build number - in parentheses.
Player Signage Applications V9.3.5 (44258)
Player System V9.3.5 (44258)
Player Web UI Applications V9.3.5 (44258)
The md5sum for this release's update OPF file is:
1114e58c4f41d741357d8a258e58678f NTB-update9-V9.3.5-44258.opf
NEW IN V9.3.4
The iCompel must be running V9.2.4, V9.2.5, V9.3.0, V9.3.1, V9.3.2 or V9.3.3 before updating
to V9.3.4
Use NTB-update9-V9.3.4-43852.opf to update from V9.2.4, V9.3.0, V9.3.1, V9.3.2 or V9.3.3
ICOS models must be running V9.2.5 to use the update.
New features:
Support Romanian on the International page.
Problems fixed:
Update Adobe Flash to version 11.2.202.336 to fix CVE-2014-0497.
The VPN connection used for reporting to an iCompel Depoloyment Manager in rare situations
were not initializing.
Movie player transition from movie to movie has been improved when changing zone position
and size.
Fix fallback language logic for web pages.
TRANSLATION STATUS
The iCompel Web User Interface is fully supported in English. Translations are available in
other languages as detailed below.
Note: The Help and User Guide pages are supplied only in English.
The following languages have full translations in this release.
American English
Arabic
Brazilian
British English
French
German
Italian
Japanese
Korean
Portuguese
Russian
Simplified Chinese
Spanish
Thai
Traditional Chinese
Turkish
KNOWN LIMITATIONS
If the iCompel starts up with the HDMI or DisplayPort Audio selected but no screen connected
the audio will fall back to using the analog output. No warning is given in the UI that this has
happened. Connect the configured screen to the iCompel and reboot to resolve this.
The iCompel display may be distorted or damaged after using the Ctrl-Alt-F2 emergency
maintenance system (only for use under the guidance of Black Box Technical Support). A reboot
will restore proper operation.
HTML Player does not support Java Applets.
HTML Player cannot access FTP resources.
There is a limit to the total amount of text that can be drawn by a single text item.
The Web UI has some minor display issues under Windows Internet Explorer 6 (Apple Safari,
Mozilla Firefox, Windows Internet Explorer 7 or later do not have these issues).
The Web UI has some display issues under Windows Internet Explorer 7 when using Arabic.
When using the Windows 8 Modern UI version of Internet Explorer 10 (not the desktop version),
you may be repeatedly presented with prompts to enter a username and password. This is an
Internet Explorer bug; the workaround is to append a "?" to the end of the URL.
When uploading files using Apple Safari it is not possible to show a progress bar.
When booting ICPS-VE-x models on DVI or HDMI there will be a period of a few seconds
before the splash screen is seen.
The home page may show screen off after a reboot even though it is on. Refreshing the page will
show the current state of the display.
When using the emergency maintenance console (Ctrl-Alt-F2 and login as maint) to Factory
Reset Media, the iCompel will show "Loading inital ramdisk..." mid-operation. Press Ctrl-Alt-F2
to resume.
The Web UI has some display issues in Google Chrome.
Layout Packages created on the iCompel Content Commander and uploaded to an iCompel
Publisher will claim to require software version 1.1.0. This is the iCC version, not the Publisher
version.
Starting the iCompel with a USB storage device (flash stick, USB HDD) plugged in can cause
the iCompel to enter "emergency mode". Remove the USB storage device and reboot the
iCompel to fix this issue.
DETAILED VERSION IDENTIFICATION
The software release version described herein is comprised of a number of sub-packages. Each
sub-package has a build number - in parentheses.
Player Signage Applications V9.3.4 (43852)
Player System V9.3.4 (43852)
Player Web UI Applications V9.3.4 (43852)
The md5sum for this release's update OPF file is:
97993aad60904e85da5773a22c58368c NTB-update9-V9.3.4-43852.opf
NEW IN V9.3.3
The iCompel must be running V9.2.4, V9.2.5, V9.3.0, V9.3.1 or V9.3.2 before updating to
V9.3.3
Use NTB-update9-V9.3.3-43567.opf to update from V9.2.4, V9.3.0, V9.3.1 or V9.3.2
ICOS models must be running V9.2.5 to use the update.
Problems fixed:
• Fix issue with Home page not showing correctly for users certain combination of permissions.
• Fix issue with Ad-hoc Schedule override UI showing a traceback
• Fix reporting of large Media Audit reports.
• In some instances the "Publish Required" state was not being set.
Translation Status:
The iCompel Web User Interface is fully supported in English. Translations are available in
other languages as detailed below.
Note: The Help and User Guide pages are supplied only in English.
The following languages have full translations in this release.
• American English
• Arabic
• Brazilian
British English
• French
• German
• Italian
• Japanese
• Korean
• Portuguese
• Russian
• Simplified Chinese
• Spanish
• Thai
• Traditional Chinese
• Turkish
KNOWN LIMITATIONS
If the iCompel starts up with the HDMI or DisplayPort Audio selected but no screen connected
the audio will fall back to using the analog output. No warning is given in the UI that this has
happened. Connect the configured screen to the iCompel and reboot to resolve this.
The iCompel display may be distorted or damaged after using the Ctrl-Alt-F2 emergency
maintenance system (only for use under the guidance of Black Box Technical Support). A reboot
will restore proper operation.
HTML Player does not support Java Applets.
HTML Player cannot access FTP resources.
There is a limit to the total amount of text that can be drawn by a single text item.
The Web UI has some minor display issues under Windows Internet Explorer 6 (Apple Safari,
Mozilla Firefox, Windows Internet Explorer 7 or later do not have these issues).
The Web UI has some display issues under Windows Internet Explorer 7 when using Arabic.
When using the Windows 8 Modern UI version of Internet Explorer 10 (not the desktop version),
you may be repeatedly presented with prompts to enter a username and password. This is an
Internet Explorer bug; the workaround is to append a "?" to the end of the URL.
When uploading files using Apple Safari it is not possible to show a progress bar.
When booting ICPS-VE-x models on DVI or HDMI there will be a period of a few seconds
before the splash screen is seen.
The home page may show screen off after a reboot even though it is on. Refreshing the page will
show the current state of the display.
When using the emergency maintenance console (Ctrl-Alt-F2 and login as maint) to Factory
Reset Media, the iCompel will show "Loading inital ramdisk..." mid-operation. Press Ctrl-Alt-F2
to resume.
The Web UI has some display issues in Google Chrome.
Layout Packages created on the iCompel Content Commander and uploaded to an iCompel
Publisher will claim to require software version 1.1.0. This is the iCC version, not the Publisher
version.
Starting the iCompel with a USB storage device (flash stick, USB HDD) plugged in can cause
the iCompel to enter "emergency mode". Remove the USB storage device and reboot the
iCompel to fix this issue.
DETAILED VERSION IDENTIFICATION
The software release version described herein is comprised of a number of sub-packages. Each
sub-package has a build number - in parentheses.
Player Signage Applications V9.3.3 (43567)
Player System V9.3.3 (43567)
Player Web UI Applications V9.3.3 (43567)
The md5sum for this release's update OPF file is:
04116ca28b83abc31186e28caeaaa331 NTB-update9-V9.3.3-43567.opf
NEW IN V9.2.4
The iCompel must be running V9.2.3 before updating to V9.2.4
Use NTB-update923-V9.2.4-37977.opf to update from V9.2.3
New features:
• Support layouts published by the iCompel Content Commander (iCC).
• 900pt text is now supported for clocks and text items.
• Add support for the Q Series VESA model.
• Backups created by an iCompel Publisher running 9.2.4 can be imported into iCC 1.1.
Problems fixed:
• Support font size up to 900pt.
• Support more Multi-touch screens.
• Add support for TPV touchscreens.
• Improve movie player memory use.
• Improve movie player Audio/Video synchronization.
• Enhance security by adding fix for TLS vulnerability.
• Enhance security by removing HTTPS use of so called "Weak" and "Medium" Ciphers.
• Fix for XML API not being available when using a crossover Ethernet cable.
• Fixed issue with local files being created that prevent the Web UI updating network settings.
• Fixed visual problem with text scrolling when a Subscriber is heavily loaded
• Scheduler actions always take effect at the start of a second. This allows actions, for example
advance to, taken on multi players to be synchronized.
• Added support for more 3G/4G modem devices.
• Added .svg as an HTML file type, allowing .svg files to be added to playlists.
• Fixed problem where reporting may send redundant reports when the network connection is
very slow.
• Improved the performance of compositing the full screen image allowing more complex
layouts to play well.
• Fix issue with file drag and drop not working in the Safari web browser.
• SSH port changes where not being honored at the first reboot.
• Only 1 port number can be configured for FTP, fixed the Security web page to only ask for 1
port.
• When using the emergency maintenance console (Ctrl-Alt-F2 and login as maint) to Factory
Reset Media, the iCompel will show "Loading inital ramdisk..." mid-operation. Press Ctrl-Alt-F2
to resume.
Translation Status:
The iCompel Web User Interface is fully supported in English. Translations are available in
other languages as detailed below.
Note: The Help and User Guide pages are supplied only in English.
The following languages have fully translations in this release.
• American English
• Arabic
• Brazilian
• French
• German
• Italian
• Japanese
• Korean
• Portuguese
• Russian
• Simplified Chinese
• Spanish
• Thai
• Traditional Chinese
KNOWN LIMITATIONS
If the iCompel starts up with the HDMI or DisplayPort Audio selected but no screen connected
the audio will fall back to using the analog output. No warning is given in the UI that this has
happened. Connect the configured screen to the iCompel and reboot to resolve this.
The iCompel display may be distorted or damaged after using the Ctrl-Alt-F2 emergency
maintenance system (only for use under the guidance of Black Box Technical Support). A reboot
will restore proper operation.
HTML Player does not support Java Applets.
HTML Player cannot access FTP resources.
There is a limit to the total amount of text that can be drawn by a single text item.
The Web UI has some minor display issues under Windows Internet Explorer 6 (Apple Safari,
Mozilla Firefox, Windows Internet Explorer 7 or later do not have these issues).
The Web UI has some display issues under Windows Internet Explorer 7 when using Arabic.
When using the Windows 8 Modern UI version of Internet Explorer 10 (not the desktop version),
you may be repeatedly presented with prompts to enter a username and password. This is an
Internet Explorer bug; the workaround is to append a "?" to the end of the URL.
When uploading files using Apple Safari it is not possible to show a progress bar.
When booting ICPS-VE-x models on DVI or HDMI there will be a period of a few seconds
before the splash screen is seen.
The home page may show screen off after a reboot even though it is on. Refreshing the page will
show the current state of the display.
When using the emergency maintenance console (Ctrl-Alt-F2 and login as maint) to Factory
Reset Media, the iCompel will show "Loading inital ramdisk..." mid-operation. Press Ctrl-Alt-F2
to resume.
The Web UI has some display issues in Google Chrome.
Layout Packages created on the iCompel Content Commander and uploaded to an iCompel
Publisher will claim to require software version 1.1.0. This is the iCC version, not the Publisher
version.
Starting the iCompel with a USB storage device (flash stick, USB HDD) plugged in can cause
the iCompel to enter "emergency mode". Remove the USB storage device and reboot the
iCompel to fix this issue.
DETAILED VERSION IDENTIFICATION
The software release version described herein is comprised of a number of sub-packages. Each
sub-package has a build number - in parentheses.
Player Signage Applications V9.2.4 (37977)
Player System V9.2.4 (37977)
Player Web UI Applications V9.2.4 (37977)
The md5sum for this release's update OPF file is:
e013de0c4f1f1819f31c513d033b74e5 NTB-update923-V9.2.4-37977.opf
NEW IN V9.2.3
The iCompel must be running V9.1.3, V9.1.4, V9.2.0, V9.2.1 or V9.2.2 before updating to
V9.2.3
Use NTB-update9-V9.2.3-34255.opf to update from V9.1.3, V9.1.4, V9.2.0 or V9.2.1
Use NTB-update922-V9.2.3-34255.opf to update from V9.2.2
Problems fixed:
• Drag-n-drop of a file into a playlist when the layout or zone uses unicode names.
• Change layout command in playlist may not be executed after an external advance to command
is sent to the iCompel
• Rich text editing for Firefox 17.
• Updating an iCompel that has wireless network configure prevented further editing of access
point passwords.
• Documentation improvements.
TRANSLATION STATUS
The iCompel Web User Interface is fully supported in English. Translations are available in
other languages as detailed below.
Note: The Help and User Guide pages are supplied only in English.
The following languages have fully translations in this release.
• American English
• Arabic
• Brazilian
• French
• German
• Italian
• Japanese
• Korean
• Portuguese
• Russian
• Simplified Chinese
• Spanish
• Thai
• Traditional Chinese
KNOWN LIMITATIONS
If the iCompel starts up with the HDMI or DisplayPort Audio selected but no screen connected
the audio will fall back to using the analog output. No warning is given in the UI that this has
happened. Connect the configured screen to the iCompel and reboot to resolve this.
The iCompel display may be distorted or damaged after using the Ctrl-Alt-F2 emergency
maintenance system (only for use under the guidance of Black Box Technical Support). A reboot
will restore proper operation.
HTML Player does not support Java Applets.
HTML Player cannot access FTP resources.
There is a limit to the total amount of text that can be drawn by a single text item.
The Web UI has some minor display issues under Windows Internet Explorer 6 (Apple Safari,
Mozilla Firefox, Windows Internet Explorer 7 or later do not have these issues).
The Web UI has some display issues under Windows Internet Explorer 7 when using Arabic.
When using the Windows 8 Modern UI version of Internet Explorer 10 (not the desktop version),
you may be repeatedly presented with prompts to enter a username and password. This is an
Internet Explorer bug; the workaround is to append a "?" to the end of the URL.
When uploading files using Apple Safari it is not possible to show a progress bar.
When booting ICPS-VE-x models on DVI or HDMI there will be a period of a few seconds
before the splash screen is seen.
The home page may show screen off after a reboot even though it is on. Refreshing the page will
show the current state of the display.
When using the emergency maintenance console (Ctrl-Alt-F2 and login as maint) to Factory
Reset Media, the iCompel will show "Loading inital ramdisk..." mid-operation. Press Ctrl-Alt-F2
to resume.
The Web UI has some display issues in Google Chrome.
Layout Packages created on the iCompel Content Commander and uploaded to an iCompel
Publisher will claim to require software version 1.1.0. This is the iCC version, not the Publisher
version.
Starting the iCompel with a USB storage device (flash stick, USB HDD) plugged in can cause
the iCompel to enter "emergency mode". Remove the USB storage device and reboot the
iCompel to fix this issue.
DETAILED VERSION IDENTIFICATION
The software release version described herein is comprised of a number of sub-packages. Each
sub-package has a build number - in parentheses.
Player Signage Applications V9.2.3 (34255)
Player System V9.2.3 (34255)
Player Web UI Applications V9.2.3 (34255)
The md5sum for this release's update OPF file is:
b0d26dd4ffcb5a59567024ccd4aad148 NTB-update922-V9.2.3-34255.opf
f3b4c3de08fa0214f0470524c01a7c6d NTB-update9-V9.2.3-34255.opf
NEW IN V9.2.2
The iCompel must be running V9.2.1 before updating to V9.2.2
Use NTB-update92-V9.2.2-33554.opf to update from V9.2.1
Problems fixed:
• Booting without a display connected to the iCompel with a screen off in the schedule caused a
reboot.
• Setting a channel subscriber file transfer time caused a traceback in the Web UI.
• Certain movies could cause an ICKS to become unstable, requiring a reboot to recover.
• Interlaced monitors caused a traceback when updating to 9.2.1.
• LDAP enabled and FTP disabled caused the 9.2.1 OPF to fail.
• Some movies play back was not smooth.
TRANSLATION STATUS
The iCompel Web User Interface is fully supported in English. Translations are available in
other languages as detailed below.
Note: The Help and User Guide pages are supplied only in English.
The following languages have fully translations in this release.
• American English
• Arabic
• Brazilian
• French
• German
• Italian
• Japanese
• Korean
• Portuguese
• Russian
• Simplified Chinese
• Spanish
• Thai
• Traditional Chinese
KNOWN LIMITATIONS
If the iCompel starts up with the HDMI or DisplayPort Audio selected but no screen connected
the audio will fall back to using the analog output. No warning is given in the UI that this has
happened. Connect the configured screen to the iCompel and reboot to resolve this.
The iCompel display may be distorted or damaged after using the Ctrl-Alt-F2 emergency
maintenance system (only for use under the guidance of Black Box Technical Support). A reboot
will restore proper operation.
HTML Player does not support Java Applets.
HTML Player cannot access FTP resources.
There is a limit to the total amount of text that can be drawn by a single text item.
The Web UI has some minor display issues under Windows Internet Explorer 6 (Apple Safari,
Mozilla Firefox, Windows Internet Explorer 7 or later do not have these issues).
The Web UI has some display issues under Windows Internet Explorer 7 when using Arabic.
When using the Windows 8 Modern UI version of Internet Explorer 10 (not the desktop version),
you may be repeatedly presented with prompts to enter a username and password. This is an
Internet Explorer bug; the workaround is to append a "?" to the end of the URL.
When uploading files using Apple Safari it is not possible to show a progress bar.
When booting ICPS-VE-x models on DVI or HDMI there will be a period of a few seconds
before the splash screen is seen.
The home page may show screen off after a reboot even though it is on. Refreshing the page will
show the current state of the display.
When using the emergency maintenance console (Ctrl-Alt-F2 and login as maint) to Factory
Reset Media, the iCompel will show "Loading inital ramdisk..." mid-operation. Press Ctrl-Alt-F2
to resume.
The Web UI has some display issues in Google Chrome.
Layout Packages created on the iCompel Content Commander and uploaded to an iCompel
Publisher will claim to require software version 1.1.0. This is the iCC version, not the Publisher
version.
Starting the iCompel with a USB storage device (flash stick, USB HDD) plugged in can cause
the iCompel to enter "emergency mode". Remove the USB storage device and reboot the
iCompel to fix this issue.
DETAILED VERSION IDENTIFICATION
The software release version described herein is comprised of a number of sub-packages. Each
sub-package has a build number - in parentheses.
Player Signage Applications V9.2.2 (33554)
Player System V9.2.2 (33554)
Player Web UI Applications V9.2.2 (33554)
The md5sum for this release's update OPF file is:
2368fd1696bb9cd95ef7ae9c60c7c891 NTB-update92-V9.2.2-33554.opf
NEW IN V9.2.1
The iCompel must be running V9.1.3, V9.1.4 or V9.2.0 before updating to V9.2.1
Use NTB-update91-V9.2.1-33267.opf to update from V9.1.3 or V9.1.4
Use NTB-update920-V9.2.1-33267.opf to update from V9.2.0
New Features:
• Support for new mainboard in ICSS-VE models
• New Home page shows many categories of useful information all in one place.
• Audio page allows you to configure HDMI Audio, DisplayPort Audio or SPDIF as the audio
output.
Problems fixed:
• Publishing to an FTP server would not remove unused files.
• USB disks are reliably mounted after a reboot.
TRANSLATION STATUS
The iCompel Web User Interface is fully supported in English. Translations are available in
other languages as detailed below.
Note: The Help and User Guide pages are supplied only in English.
The following languages have full translations in this release.
• American English
• Arabic
• Brazilian
• French
• German
• Italian
• Japanese
• Korean
• Portuguese
• Russian
• Simplified Chinese
• Spanish
• Thai
• Traditional Chinese
KNOWN LIMITATIONS
If the iCompel starts up with the HDMI or DisplayPort Audio selected but no screen connected
the audio will fall back to using the analog output. No warning is given in the UI that this has
happened. Connect the configured screen to the iCompel and reboot to resolve this.
The iCompel display may be distorted or damaged after using the Ctrl-Alt-F2 emergency
maintenance system (only for use under the guidance of Black Box Technical Support). A reboot
will restore proper operation.
HTML Player does not support Java Applets.
HTML Player cannot access FTP resources.
There is a limit to the total amount of text that can be drawn by a single text item.
The Web UI has some minor display issues under Windows Internet Explorer 6 (Apple Safari,
Mozilla Firefox, Windows Internet Explorer 7 or later do not have these issues).
The Web UI has some display issues under Windows Internet Explorer 7 when using Arabic.
When using the Windows 8 Modern UI version of Internet Explorer 10 (not the desktop version),
you may be repeatedly presented with prompts to enter a username and password. This is an
Internet Explorer bug; the workaround is to append a "?" to the end of the URL.
When uploading files using Apple Safari it is not possible to show a progress bar.
When booting ICPS-VE-x models on DVI or HDMI there will be a period of a few seconds
before the splash screen is seen.
The home page may show screen off after a reboot even though it is on. Refreshing the page will
show the current state of the display.
When using the emergency maintenance console (Ctrl-Alt-F2 and login as maint) to Factory
Reset Media, the iCompel will show "Loading inital ramdisk..." mid-operation. Press Ctrl-Alt-F2
to resume.
The Web UI has some display issues in Google Chrome.
Layout Packages created on the iCompel Content Commander and uploaded to an iCompel
Publisher will claim to require software version 1.1.0. This is the iCC version, not the Publisher
version.
Starting the iCompel with a USB storage device (flash stick, USB HDD) plugged in can cause
the iCompel to enter "emergency mode". Remove the USB storage device and reboot the
iCompel to fix this issue.
DETAILED VERSION IDENTIFICATION
The software release version described herein is comprised of a number of sub-packages. Each
sub-package has a build number - in parentheses.
Player Signage Applications V9.2.1 (33267)
Player System V9.2.1 (33267)
Player Web UI Applications V9.2.1 (33267)
The md5sum for this release's update OPF file is:
8bcb8fca7c19cf5b565eb64e07b2ccf3 NTB-update91-V9.2.1-33267.opf
ea47728add57e62139d73fe81c3a22cc NTB-update920-V9.2.1-33267.opf
NEW IN V9.2.0
The iCompel must be running V9.1.4 or V9.1.3 before updating to V9.2.0
New Features:
• Support for new mainboard in ICPS-VE models.
• New Home page shows many categories of useful information all in one place.
• New page banner that can be collapsed to allow more space for page content.
• Channel Subscription now supports creating unique subscription URLs by appending the
iCompel's serial number.
• iCompel User Guide has been updated.
• Progress of updates is now shown on the boot splash screen.
Problems fixed:
• Fixed Web page language picking code to match W3C standard.
• Fixed issue with images played at the wrong size when the "Position and Size" of a image has
been changed from the zone default position and size.
TRANSLATION STATUS
The iCompel Web User Interface is fully supported in English. Translations are available in
other languages as detailed below.
Note: The Help and User Guide pages are supplied only in English.
The following languages have partial translations in this release.
• American English
• Arabic
• French
• German
• Italian
• Japanese
• Korean
• Portuguese
• Russian
• Spanish
• Thai
• Chinese
KNOWN LIMITATIONS
• The iCompel display may be distorted or damaged after using the Ctrl-Alt-F2 emergency
maintenance system (only for use under the guidance of Black Box Technical Support). A reboot
will restore proper operation.
• HTML Player does not support Java Applets.
• HTML Player cannot access FTP resources.
• There is a limit to the total amount of text that can be drawn by a single Text Item.
• The Web UI has some minor display issues under Windows Internet Explorer 6 (Mozilla
Firefox, Windows Internet Explorer 7 or Windows Internet Explorer 8 do not have these issues).
• The Web UI has some display issues under Windows Internet Explorer 7 when using Arabic
• When uploading files using Apple Safari it is not possible to show a progress bar.
• Wireless password is lost in update.
• USB disks are not reliably mounted after a reboot. Please unplug and plug back in.
DETAILED VERSION IDENTIFICATION
The software release version described herein is comprised of a number of sub-packages. Each
sub-package has a build number - in parentheses.
Player Signage Applications V9.2.0 (32389)
Player System V9.2.0 (32389)
Player Web UI Applications V9.2.0 (32389)
The md5sum for this release's update OPF file is:
70a50edd68b527469131cf43c2e08559 NTB-update91-V9.2.0-32389.opf
NEW IN V9.1.5
The iCompel must be running V9.1.4 before updating to V9.1.5
Problems fixed:
• Improve movie stability when streaming video over Fazzt.
TRANSLATION STATUS
The iCompel Web User Interface is fully supported in English. Translations are available in
other languages as detailed below.
Note: The Help and User Guide pages are supplied only in English.
The following languages have partial translations in this release.
• American English
• Arabic
• French
• German
• Italian
• Japanese
• Korean
• Portuguese
• Russian
• Spanish
• Thai
• Chinese
KNOWN LIMITATIONS
• The iCompel display may be distorted or damaged after using the Ctrl-Alt-F2 emergency
maintenance system (only for use under the guidance of Black Box Technical Support). A reboot
will restore proper operation.
• HTML Player does not support Java Applets.
• HTML Player cannot access FTP resources.
• There is a limit to the total amount of text that can be drawn by a single text item.
• The Web UI has some minor display issues under Windows Internet Explorer 6 (Mozilla
Firefox, Windows Internet Explorer 7 or Windows Internet Explorer 8 do not have these issues).
• The Web UI has some display issues under Windows Internet Explorer 7 when using Arabic
• When uploading files using Apple Safari it is not possible to show a progress bar.
DETAILED VERSION IDENTIFICATION
The software release version described herein is comprised of a number of sub-packages. Each
sub-package has a build number - in parentheses.
Player Signage Applications V9.1.5 (34724)
Player System V9.1.5 (34724)
Player Web UI Applications V9.1.5 (34724)
The md5sum for this release's update OPF file is:
c5a6358fa8c37d4a56a951774e853c87 NTB-update914-V9.1.5-32166.opf
NEW IN V9.1.4
The iCompel must be running V9.1.3 before updating to V9.1.4
New Features:
• Integrate the KenCast Fazzt Client into the iCompel software. This enables you to transport
Channel, Software Update and Streaming Video over a KenCast Fazzt link; licenses are required
from Black Box and from KenCast to enable this feature.
TRANSLATION STATUS
The iCompel Web User Interface is fully supported in English. Translations are available in
other languages as detailed below.
Note: The Help and User Guide pages are supplied only in English.
The following languages have partial translations in this release.
• American English
• Arabic
• French
• German
• Italian
• Japanese
• Korean
• Portuguese
• Russian
• Spanish
• Thai
• Chinese
KNOWN LIMITATIONS
• The iCompel display may be distorted or damaged after using the Ctrl-Alt-F2 emergency
maintenance system (only for use under the guidance of Black Box Technical Support). A reboot
will restore proper operation.
• HTML Player does not support Java Applets.
• HTML Player cannot access FTP resources.
• There is a limit to the total amount of text that can be drawn by a single Text Item.
• The Web UI has some minor display issues under Windows Internet Explorer 6 (Mozilla
Firefox, Windows Internet Explorer 7 or Windows Internet Explorer 8 do not have these issues).
• The Web UI has some display issues under Windows Internet Explorer 7 when using Arabic
• When uploading files using Apple Safari it is not possible to show a progress bar.
DETAILED VERSION IDENTIFICATION
The software release version described herein is comprised of a number of sub-packages. Each
sub-package has a build number - in parentheses.
Player Signage Applications V9.1.4 (32166)
Player System V9.1.4 (32166)
Player Web UI Applications V9.1.4 (32166)
The md5sum for this release's update OPF file is:
c5a6358fa8c37d4a56a951774e853c87 NTB-update9-V9.1.4-32166.opf
NEW IN V9.1.3
The ICOMPEL must be running V9.1.2, V9.1.0, V9.0.2 or V8.1.4 before updating to V9.1.3
Use NTB-update91-V9.1.3-31527.opf to update from V9.1.2 or V9.1.0
Use NTB-update90-V9.1.3-31527.opf to update from V9.0.2
Use NTB-update8-V9.1.3-31527.opf to update from V8.1.4
Problems fixed:
Fix problems with updating AC4000 & ICOMP models.
Fix Ghost file issue in Drag and Drop
Increase maximum allowed OPF update size to 1.5GB.
TRANSLATION STATUS
The ICOMPEL Web User Interface is fully supported in English.
Translations are available in other languages as detailed below.
Note: The Help and User Guide pages are only supplied in English.
The following languages have partial translations in this release.
American English
Arabic
French
German
Italian
Japanese
Korean
Portuguese
Russian
Spanish
Thai
Chinese
KNOWN LIMITATIONS
The ICOMPEL display may be distorted or damaged after using the
Ctrl-Alt-F2 emergency maintenance system (only for use under the
guidance of the Black Box support team). A reboot will restore proper
operation.
HTML Player does not support Java Applets.
HTML Player cannot access FTP resources.
There is a limit to the total amount of text that can be drawn by a single Text Item.
The Web UI has some minor display issues under Windows Internet Explorer 6
(Mozilla Firefox, Windows Internet Explorer 7 or Windows Internet Explorer 8 do not
have these issues).
The Web UI has some display issues under Windows Internet Explorer 7 when using
Arabic
When uploading files using Apple Safari it is not possible to show a progress bar.
DETAILED VERSION IDENTIFICATION
The software release version described herein is comprised of a number of sub-packages.
Each sub-package has a build number - in parentheses.
Player Signage Applications V9.1.3 (31527)
Player System V9.1.3 (31527)
Player Web UI Applications V9.1.3 (31527)
The md5sum for this release's update OPF file is:
00776fbb6327031215d7dc11cdaa9193 NTB-update8-V9.1.3-31527.opf
de9229562572bcd85b703a0f940a164d NTB-update90-V9.1.3-31527.opf
ddd5019f783426f9a89aac312a3cc428 NTB-update91-V9.1.3-31527.opf
NEW IN V9.1.2
This release will not successfully update an AC4000 or ICOMP appliance that was factory
installed with V7.4.2 or earlier.
The NTB must be running V9.0.2, V9.1.0 or V8.1.4 before updating to V9.1.2
Use NTB-update90-V9.1.2-30961.opf to update from V9.0.2
Use NTB-update91-V9.1.2-30961.opf to update from V9.0.2
Use NTB-update8-V9.1.2-30961.opf to update from V8.1.4
Problems fixed:
Fix problems with cropping images.
Fix problems with alpha blending of images leading to poor image quality.
Fix issue with local time being reset by NTP on an update.
TRANSLATION STATUS
The ICOMPEL Web User Interface is fully supported in English.
Translations are available in other languages as detailed below.
Note: The Help and User Guide pages are only supplied in English.
The following languages have partial translations in this release.
American English
Arabic
French
German
Italian
Japanese
Korean
Portuguese
Russian
Spanish
Thai
Chinese
KNOWN LIMITATIONS
The ICOMPEL display may be distorted or damaged after using the
Ctrl-Alt-F2 emergency maintenance system (only for use under the
guidance of the Black Box support team). A reboot will restore proper
operation.
HTML Player does not support Java Applets.
HTML Player cannot access FTP resources.
There is a limit to the total amount of text that can be drawn by a single Text Item.
The Web UI has some minor display issues under Windows Internet Explorer 6
(Mozilla Firefox, Windows Internet Explorer 7 or Windows Internet Explorer 8 do not
have these issues).
The Web UI has some display issues under Windows Internet Explorer 7 when using
Arabic
When uploading files using Apple Safari it is not possible to show a progress bar.
DETAILED VERSION IDENTIFICATION
The software release version described herein is comprised of a number of sub-packages.
Each sub-package has a build number - in parentheses.
Player Signage Applications V9.1.2 (30961)
Player System V9.1.2 (30961)
Player Web UI Applications V9.1.2 (30961)
The md5sum for this release's update OPF file is:
cec1f7eef4e82062ee4c1e9787aad611 NTB-update8-V9.1.2-30961.opf
4eb9d8bf6538f0bfa8278bd1f4be52a3 NTB-update90-V9.1.2-30961.opf
671bde5fdb24a331924333db092b9ffd NTB-update91-V9.1.2-30961.opf
NEW IN V9.1.0
The ICOMPEL must be running V9.0.2 or V8.1.4 before updating to V9.1.0
Use NTB-update9-V9.1.0-30614.opf to update from V9.0.2
Use NTB-update8-V9.1.0-30614.opf to update from V8.1.4
New Features:
Support ICSS-VE and ICSS-2U hardware.
Image fade support; fade-in and fade-out of images, and cross-fade between two images
in the same playlist.
Live preview of the ICOMPEL output in your browser.
Native support for QR codes in playlists.
All new Screen tests optimized to the screen orientation and resolution.
Problems fixed:
It was possible to choose screen settings that prevented the ICOMPEL
from starting up. The ICOMPEL will now start up regardless of screen
settings.
Screen tests did not work properly on high resolution displays. A
new set of screen tests have been implemented, more suited to high
resolution digital displays.
Report an error when attempting to publish or create a layout package with a layout with
no visible zones.
Drag and drop of files into the Web UI has been improved.
Fix problem with ping command not working on updated ICOMPELs.
TRANSLATION STATUS
The ICOMPEL Web User Interface is fully supported in English.
Translations are available in other languages as detailed below.
Note: The Help and User Guide pages are only supplied in English.
The following languages have partial translations in this release.
American English
Arabic
French
German
Italian
Japanese
Korean
Portuguese
Russian
Spanish
Thai
Chinese
KNOWN LIMITATIONS
The ICOMPEL display may be distorted or damaged after using the
Ctrl-Alt-F2 emergency maintenance system (only for use under the
guidance of the Black Box support team). A reboot will restore proper
operation.
HTML Player does not support Java Applets.
HTML Player cannot access FTP resources.
There is a limit to the total amount of text that can be drawn by a single Text Item.
The Web UI has some minor display issues under Windows Internet Explorer 6
(Mozilla Firefox, Windows Internet Explorer 7 or Windows Internet Explorer 8 do not
have these issues).
When uploading files using Apple Safari it is not possible to show a progress bar.
Windows version 4.0.4 of Apple Safari: When the ICOMPEL reports errors to the user
Safari will hang. Use another browser until Apple fixes the problem.
DETAILED VERSION IDENTIFICATION
The software release version described herein is comprised of a number of sub-packages.
Each sub-package has a build number - in parentheses.
Player Signage Applications V9.1.0 (30614)
Player System V9.1.0 (30614)
Player Web UI Applications V9.1.0 (30614)
The md5sum for this release's update OPF file is:
9498a41b506c28b4f8ce3a52d9b147ac NTB-update8-V9.1.0-30614.opf
8b15ca048bec6b2e47a894ac62f9e740 NTB-update9-V9.1.0-30614.opf
NEW IN V9.0.2
The ICOMPEL must be running V9.0.1 before updating to V9.0.2
Use NTB-update9-V9.0.2-28666.opf to update from V9.0.1
New Features:
Support for P Series 2U HDMI capture card (ICOMP-HDCC).
Support for P Series WiFi card (ICOMP-WIFI).
Maximum Layout Canvas Size width is now 2560. This allows canvas size of 2560x1440
to be use when the ICOMPEL hardware permits (P Series).
Problems fixed:
Fixed: Screen page could not been shown in any language but
English.
Fixed: Uploading a ZIP file that was not a Layout Package showed
a trace back.
Fixed: Time validity did not work correct when using
synchronized folder play.
Fixed: CPU Temperature was not reported correctly on certain models.
Fixed: ICOMP01-R2 models no longer report mainboard temperature as
it is not reliable.
Fixed: Issue with American TV (ATSC) seen in Pittsburgh.
Fixed: Layout Packages and Channel claims to be using V9
features when they were not.
TRANSLATION STATUS
The ICOMPEL Web User Interface is fully supported in English.
Translations are available in other languages as detailed below.
Note: The Help and User Guide pages are only supplied in English.
The following languages have partial translations in this release.
American English
Arabic
French
German
Italian
Japanese
Korean
Portuguese
Russian
Spanish
Thai
Chinese
KNOWN LIMITATIONS
HTML Player does not support Java Applets.
HTML Player cannot access FTP resources.
There is a limit to the total amount of text that can be drawn
by a single Text Item.
The Web UI has some minor display issues under Windows Internet
Explorer 6 (Mozilla Firefox, Windows Internet Explorer 7 or Windows
Internet Explorer 8 do not have these issues).
When uploading files using Apple Safari it is not possible to
show a progress bar.
Windows version 4.0.4 of Apple Safari: When the ICOMPEL reports
errors to the user Safari will hang. Use another browser until Apple
fixes the problem.
DETAILED VERSION IDENTIFICATION
The software release version described herein is comprised of a
number of sub-packages. Each sub-package has a build number - in
parentheses.
Player Signage Applications V9.0.2 (28666)
Player System V9.0.2 (28666)
Player Web UI Applications V9.0.2 (28666)
The md5sum for this release's update OPF file is:
d888faff3000ffe2302ed5744218b2ad NTB-update9-V9.0.2-28666.opf
The ICOMPEL must be running V9.0.0, V8.1.1, V8.1.2 or V8.1.3 before updating to V9.0.1
NEW IN V9.0.1
Use NTB-update9-V9.0.1-28346.opf to update from V9.0.0
Use NTB-update8-V9.0.1-28346.opf to update from V8.1.1, V8.1.2 and V8.1.3
New Features:
Support for P Series hardware.
Auditioning of TV stations now uses available screen area.
Support Plug and Play for monitors that report stand modes only.
Problems fixed:
Layout package import was reporting errors in the layout package that where in fact
problems with layouts already on the ICOMPEL.
Fix FTP access when LDAP is enabled.
Backup was missing some configuration files.
TRANSLATION STATUS
The ICOMPEL Web User Interface is fully supported in English.
Translations are available in other languages as detailed below.
Note: The Help and User Guide pages are only supplied in English.
The following languages have partial translations in this release.
American English
Arabic
French
German
Italian
Japanese
Korean
Portuguese
Russian
Spanish
Thai
Chinese
KNOWN LIMITATIONS
HTML Player does not support Java Applets.
HTML Player cannot access FTP resources.
There is a limit to the total amount of text that can be drawn by a single Text Item.
The Web UI has some minor display issues under Windows Internet Explorer 6
(Mozilla Firefox, Windows Internet Explorer 7 or Windows Internet Explorer 8 do not
have these issues).
When uploading files using Apple Safari it is not possible to show a progress bar.
Windows version 4.0.4 of Apple Safari: When the ICOMPEL reports errors to the user
Safari will hang. Use another browser until Apple fixes the problem.
DETAILED VERSION IDENTIFICATION
The software release version described herein is comprised of a number of sub-packages.
Each sub-package has a build number - in parentheses.
Player Signage Applications V9.0.1 (28346)
Player System V9.0.1 (28346)
Player Web UI Applications V9.0.1 (28346)
The md5sum for this release's update OPF files are:
313b0443503c7e2198152f89bb98a42e NTB-update8-V9.0.1-28346.opf
0e6a670834cf1ab357a0be597e643539 NTB-update9-V9.0.1-28346.opf
NEW IN V9.0.0
Use NTB-update8-V9.0.0-27501.opf to update from V8.1.1, V8.1.2 and V8.1.3
New Features:
Improved movie player with per item de-interlacing, draw modes of crop, letter box and
stretch.
Support plug-n-play screen handling:
o will work without a screen connected to the ICOMPEL
o will automatically choose the best resolution the screen offers
o will scale up or down from the design size to fill the screen plugged into the
ICOMPEL
o Note: only one screen at a time is supported
o Setup/Player/Screen page has been redesigned to support play-n-play.
New screen orientation of bottom-at-top.
Splash screen is shown while the ICOMPEL is booting up.
Memory is managed automatically by the ICOMPEL allowing complex media to play in
web pages with needing to administer ICOMPEL settings.
The Player settings that used to control HTML memory limits have been removed.
Screen settings can be donated and updated via an IDM using the remote setup feature.
The "maint" menu is now accessible by typing Ctrl-Alt-F2.
All important log files are now stored in the /logs folder where they can be managed from
FTP or the Web User Interface of the ICOMPEL.
Support adding SSL certificate files for use with HTTPS.
User permission "Subscribe Channel" gives read only access to files in the channel folder
from HTTP and HTTPS.
Add media item durations can now be specified to a resolution of 1/20th of a second.
The limit on overall Layout Package size of now 16GB, with a limit of 4GB for each
media file.
Removed features:
Native PowerPoint presentation files are no longer supported. We recommend you save
you presentations as movies and play the movies on the ICOMPEL.
Plasma Burn mitigation has been removed.
V5 channels and layout packages are no longer supported. The earliest version support is
V7.4.0.
Problems fixed:
Layout name can now be renamed to fix the issue with case. For example rename
"SChool" to "School".
Player Status CPU load graph can be misleading on some ICOMPEL models.
The ICOMPEL would appear to have spare CPU resources when in fact it was fully
utilized.
The CPU Load graph graphic now shows when the ICOMPEL may be starting to
overload on affected models.
Player Status show per zone CPU load graphs.
Prevent use of HTTP proxy for FTP connections.
TRANSLATION STATUS
The ICOMPEL Web User Interface is fully supported in English.
Translations are available in other languages as detailed below.
Note: The Help and User Guide pages are only supplied in English.
The following languages have partial translations in this release.
American English
Arabic
French
German
Italian
Japanese
Korean
Portuguese
Russian
Spanish
Thai
Chinese
KNOWN LIMITATIONS
HTML Player does not support Java Applets.
HTML Player cannot access FTP resources.
There is a limit to the total amount of text that can be drawn by a single Text Item.
The Web UI has some minor display issues under Windows Internet Explorer 6
(Mozilla Firefox, Windows Internet Explorer 7 or Windows Internet Explorer 8 do not
have these issues).
When uploading files using Apple Safari it is not possible to show a progress bar.
Windows version 4.0.4 of Apple Safari: When the ICOMPEL reports errors to the user
Safari will hang. Use another browser until Apple fixes the problem.
DETAILED VERSION IDENTIFICATION
The software release version described herein is comprised of a number of sub-packages.
Each sub-package has a build number - in parentheses.
Player Signage Applications V9.0.0 (27501)
Player System V9.0.0 (27501)
Player Web UI Applications V9.0.0 (27501)
The md5sum for this release's update OPF files are:
bfd7eb88eed380a4511cb36fee483ad7 NTB-update8-V9.0.0-27501.opf