Version 5.0 to Version 10.2 Hardware-, Software- and Prozess-Upgrade
description
Transcript of Version 5.0 to Version 10.2 Hardware-, Software- and Prozess-Upgrade
Version 5.0 to Version 10.2 Version 5.0 to Version 10.2 Hardware-, Software- and Hardware-, Software- and
Prozess-UpgradeProzess-Upgrade
DESY MKS-2
Versions 5 to 10.2 Hardware Upgrade
HardwareHardware
• Hardware Upgrade Overview
• Was ist Kompatibel?
• Version 5 to 10.2
• Micro Chassis
• I/O Families
• Kabel
Versions 5 to 10.2 Hardware Upgrade
AusführungAusführung
• Was muß geändert werden ?
• Version 5 to Version 10.2 – All PCMs
• Micro Chassis
Versions 5 to 10.2 Hardware Upgrade
VoraussetzungenVoraussetzungen
• What are the PC Requirements?
• Version 10 and up
• Operating System
• Software
• What Networking Changes are Required?
• Version 9 and Version 10 to 11
• For the PCM
• For the PC
Versions 5 to 10.2 Hardware Upgrade
Was ist Kompatiebel?
• Version 5 to Version 10.2 • T386/486, and Pentium 586 CPU boards
• Ethernet link 0 and link 1 Cards
• UTB - Utility Board - No Change
• PSA - Process Select Assembly - No Change
• RLink Token Ring Card is NOT supported with V10
PCMI DCMPCMII
CDCMPCMIII
PCM2000OCM
PVNPVX? ?
??
????
?
Versions 5 to 10.2 Hardware Upgrade
• All previously supported I/O families are still supported
• 16000
• GPXIO
• Siemens 505 Remote
• Modicon Remote
• Modicon Quantum
• Quantum High Density
• Modbus +
• A-B Data Highway +
Data Highway+
Modbus +
Modicon
P810
Modicon
J890
Modicon
BXXX
Modicon
BXXX
Modicon
BXXX
Modicon
BXXX
S908
AB I/O
CDCM
Redundant TCP/IP Ethernet Communications
Siemens I/O
PLC 5/40
Modicon PLC
Windows NT Display NodeMulti-Monitor Console
PCM 2000
PCM 2000
Operator Workstation
Was ist Kompatiebel?
PCM 4100
Versions 5 to 10.2 Hardware Upgrade
• I/O Family Additions
• Version 10.1
• Redundant Profibus
• Multiple 505 I/O Redundancy Schemes
• Version 10.2
• Redundant /Non Redundant ControlNetTM
• Foundation Fieldbus Connectivity
• Through
• OPC
• Modbus
• Controlnet
H1
PLC 5/40
1771 I/O
PCM
D/3 HybridProcess Controllers
Redundant TCP/IP Ethernet Communications
CDCM
Was ist Kompatiebel?
PCM 4100
Versions 5 to 10.2 Hardware Upgrade
• Version 5 to Version 10.2 I/O Families
• PIO Multibus 16000 I/O Board No Change
• Intel 544 Multibus GPXIO Board No Change
• Intel 86/35 GPXIO Board No Change
Was muß geändert werden ?
Versions 5 to 10.2 Hardware Upgrade
• Version 5 to Version 10.2 - I/O Families
• SST Multibus Modbus+ Board No Change
• SST Multibus Data Highway+ Board No Change
• SST Multibus Profibus Board No Change
• SST Multibus ControlNet Board No Change
• Rockwell Multibus ControlNet Board No Change
Was ist Kompatiebel?
Versions 5 to 10.2 Hardware Upgrade
• Version 5 to Version 10.2 - I/O Families
• NEW ISA PIO Card
• NEW PCI MRIOC Card
• NEW PCI Modbus Plus Card
• NEW PCI Data Highway Plus Card
• NEW PCI Profibus Card
• NEW PCI ControlNet Card
Was ist Kompatiebel?
Versions 5 to 10.2 Hardware Upgrade
• Micro Chassis CPU - Version 5 zu Version 10.2
• 386/486 CPU cards require upgrade of
SBoot PROM
• Patapsco, Interlan or IDEA Ethernet Cards
used for Link0 and Link1
• IDEA card recommended for RLINK
(3 Jumper settings)
• 40 - Link E0
• 60 - Link E1
• 50 - R-Link
• Crossover Cable used for RLink
Was muß geändert werden ?
PROMs
Versions 5 to 10.2 Hardware Upgrade
Was muß geändert werden ?
• Micro Chassis CPU - Version 5.0 to Version 10.2
• Replace 4 Boards with 1
• The 586 Pentium CPU and MFDC
(Multi Function Daughter Card)
• PROM upgrade required
• Included on the MFDC are
• 3 Independent Ethernet ports for:
• R-Link
• E1
• E0
• One 3-port parallel connector
• To connect to a PCMI/PCMII UTB
RLink
E1
E0
Versions 5 to 10.2 Hardware Upgrade
Was muß geändert werden ?• MRIOC Board - Version 5 zu Version
10.2• Prom Upgrade
• Standard I/O Modules V5 - V10.2
• Hi Density I/O Modules V10.1 - V10.2PROM
Versions 5 to 10.2 Hardware Upgrade
Was muß geändert werden ?
• Micro Chassis - Version 5.0 to Version 10.2
• New 4 Slot PICMG Backplane Holds:
• 886 ROBO-678-GSE PICMG CPU
• On-board Ethernet Link 0, Link 1 and R-Link
• Up to 3 of the 6 I/O Controller Boards
• New IUA (Intelligent Utility Assembly)
• SSB (Status Supervisory Board)
• SMB (Status Monitor Board)
• New MSA (Micro Select Assembly)
Versions 5 to 10.2 Hardware Upgrade
Was sind die PC Voraussetzungen?
• CDCM Minimum Requirements• Operating System
• 600MHZ Pentium• 256 MB RAM• 8+ MB Video RAM
• TotalVision™, InstAlarm™, & Trending
• 20 GB Hard Disk
• Software• Windows 2000 Server with Client
Access Licenses
• Internet Explorer 5.0
• Optional Office 2000 for MDL Excel
Versions 5 to 10.2 Hardware Upgrade
Was sind die PC Voraussetzungen ?
• DCM Minimum Requirements V10+• Operating System
• 450MHZ Pentium• 256 MB RAM• 8+ MB Video RAM• 9 GB Hard Disk
• Software V10+• Windows 2000 Server with Client
Access Licenses
Versions 5 to 10.2 Hardware Upgrade
Was sind die PC Voraussetzungen?
• OCM Minimum Requirements V10+• Operating System
• 400MHZ Pentium• 128 MB RAM• 8 MB Video RAM• 4 GB Hard Disk
• Software V10+• Windows 2000 Professional
Versions 5 to 10.2 Hardware Upgrade
Welche Netzwerkänderungen sind notwendig
• For the PCM V5 to V 10.2• Along with the E-net Card MAC Address, each PCM now has a
TCP/IP Address• D/3 should be on a separate network• DHCP or Server assigned IP addresses NOT supported. Addresses
must be loaded at DCM node and in WinCOD• Should be connected to other facility networks through routers• DCMs and OCMs communicate at 100Mbps• PCM has optional 100Mbps Full Duplex communication• Loaded to the PCM automatically
• When the PCM and CDCM are both booted the CDCM establishes PCM communication through the MAC Address and transmits the Ethernet address to the PCM.
• Each Mac address (E0 & E1) will need a TCP/IP address• E0 & E1 TCP/IP addresses must be on different subnets
Versions 5 to 10.2 Hardware Upgrade
Welche Netzwerkänderungen sind notwendig
• For the PC 10.2• Determine number and names of Nodes (C/DCMs)
• Setup Nodes in WinCOD• Network address for the PC (Network Neighborhood) and that
node in WinCOD must match.
• Node License• Loaded on a specific Node
• Linked to a MAC address or Sentinel
• Floating License• Loaded on License Server
• Served to users on 1st come 1st served basis