VERSATILE & PORTABLE MONITORING OF ARC WELDING … · 2018-11-01 · Welding FCAW, GMAW, SMAW, SAW...

2
An accurate and comprehensive display of welding information makes the Actual Arc Logger-S eminently suitable for use both in the field for production welding, procedure monitoring and development, and in the laboratory for pure research. The fact that it is both portable and easy to operate allows efficient transfer of laboratory techniques into practical shop floor procedures. VERSATILE & PORTABLE MONITORING OF ARC WELDING PROCESSES ARC LOGGER AAL-S

Transcript of VERSATILE & PORTABLE MONITORING OF ARC WELDING … · 2018-11-01 · Welding FCAW, GMAW, SMAW, SAW...

Page 1: VERSATILE & PORTABLE MONITORING OF ARC WELDING … · 2018-11-01 · Welding FCAW, GMAW, SMAW, SAW and AC/DC GTAW (with protection against HF Arc Starting) Screen 5.7-inch TFT Battery

An accurate and comprehensive display of welding information

makes the Actual Arc Logger-S eminently suitable for use

both in the field for production welding, procedure monitoring

and development, and in the laboratory for pure research.

The fact that it is both portable and easy to operate allows

efficient transfer of laboratory techniques into practical shop

floor procedures.

V E R S AT I L E & P O R TA B L E M O N I T O R I N G O F A R C W E L D I N G P R O C E S S E S

A R C L O G G E R

AAL-S

Page 2: VERSATILE & PORTABLE MONITORING OF ARC WELDING … · 2018-11-01 · Welding FCAW, GMAW, SMAW, SAW and AC/DC GTAW (with protection against HF Arc Starting) Screen 5.7-inch TFT Battery

S P E C I F I C AT I O N S

Probes Monitor welding current up to 2000 amps and voltage up to 100 volts

Welding FCAW, GMAW, SMAW, SAW and AC/DC GTAW (with protection against HF Arc Starting)

Screen 5.7-inch TFT

Battery Allows up to eight hours of monitoring time between charge cycles.

Welding Data Storage Dedicated 4GB removable memory stick (allowing integration of stored data into to Excel report spread sheet reports, on an external PC using supplied software)

Options QWERTY Keyboard Enables heading data input facility and easier adjustment of other settings. Transducers for the measurement of Wire Feed Speed and calculation of total Wire Payoff Welding Travel Speed for automated processes Gas Flow and consumption Type K Thermocouple for measuring Pre-Heat and Inter-Pass Temperatures

The standard base unit will measure and record Welding Current, Arc Voltage and Arc Time and will also calculate and record Arc Energy and Heat Input.

Qapqa B.V.De Amer 24, 8253 RC DrontenThe Netherlands

T +31 (0) 321 386 677 [email protected]