Versatile Elastomere Moulded Parts - MOELLERGROUP...Polyurethane elastomers are elastic materials...
4
HIGHLIGHTS DESCRIPTION OF THE TECHNOLOGY Polyurethane elastomers are elastic materials that can be specifically adjusted to relevant requirements in the hardness range of 60 Shore A to 95 Shore A. Polyurethane products are free from plasticizers! 1 Compact elastomers 2 Resistant to oils, lubricants, chemicals, UV rays 3 Very good mechanical strength 4 Variable colours and degrees of hardness 5 High resistance to wear ELASTOMERE MOULDED PARTS TECHNOLOGY INFORMATION Versatile Elastomere Moulded Parts
Transcript of Versatile Elastomere Moulded Parts - MOELLERGROUP...Polyurethane elastomers are elastic materials...
© M
ölle
rWer
ke G
mbH
EN
08/
2018
Sub
ject
to m
ater
ial a
nd te
chni
cal c
hang
es.
HIGHLIGHTS DESCRIPTION OF THE TECHNOLOGY
Polyurethane elastomers are elastic materials that can be specifically adjusted to relevant requirements in the hardness range of 60 Shore A to 95 Shore A. Polyurethane products are free from plasticizers!
1 Compact elastomers
2 Resistant to oils, lubricants, chemicals, UV rays
3 Very good mechanical strength
4 Variable colours and degrees of hardness
5 High resistance to wear
ELASTOMERE MOULDED PARTS
TECHNOLOGY INFORMATION
Versatile Elastomere Moulded Parts
TECHNICAL DATA AND MATERIAL PROPERTIES
Property Steel Rubber PUR
Abrasion behaviour + – ++
Heating with dynamic load – – – ++
Compressive strength + – ++
Cut resistance ++ – ++
Resilience x + +
UV and ozone resistance ++ + ++
Resistance to chemicals + 0 ++
Low weight – – ++ ++*
Noise reduction – – ++ ++
Corrosion resistance – – + ++
x: not suitable0: varies according to rubber* factor to steel = 1/7
– – ++(very bad) (very good)
The outstanding material properties are as follows:
▪ Very high mechanical strength and elasticity
▪ Extreme wear and abrasion resistance, also with sandy soils and abrasive concrete
▪ Very good resilience
▪ Very high impact resistance
▪ Good dynamic load capacity
▪ High hydrolytic resistance
▪ Good damping values
▪ Good weather resistance
▪ Resistance to hydrolysis and to oils and solvents
▪ Suitable for low temperatures
▪ Low permanent deformation
▪ Good resistance to high-energy radiation
▪ Permanent temperature range - 20°C to + 80°C (briefly +120°C)
▪ Soft special qualities with 60 Shore A to 95 Shore A possible
▪ Adjustable antistatic and flame-retardant properties
▪ High tear resistance
▪ Excellent cut resistance
POSSIBLE APPLICATIONS
SERVICE
We offer perfect service. We undertake all steps in the process chain – from development and mould construction, through to the finished product.
▪ Construction industry / bulk material processing: Mixer blades, scrapers, bushings, rollers, compactor supports
▪ Agriculture industry: Screening stars, star feeders, screw conveyors, bushings, rollers, fill hoppers, scrapers, bellows
▪ Special-purpose vehicle manufacture and municipal requirements: Scraper strips for winter road maintenance, swing mounts, wheel chocks, end-stop buffers
▪ Conveyor and drive engineering, general mechanical engineering: Cylinders, scrapers, guide rails, rollers, sliders
Have we aroused your interest? We will be happy to help with any questions about the technology and the wide range of applications.
© M
ölle
rWer
ke G
mbH
EN
08/
2018
Sub
ject
to m
ater
ial a
nd te
chni
cal c
hang
es.
MÖLLER – POLYURETHANE
MöllerWerke GmbH | Kupferhammer, D-33649 Bielefeld | Phone: +49 521 4477-0 | Email: [email protected]
