VERS 19-20 - GLG · 2019-09-20 · Litelux Colour Select LED Downlight Remote Driver Low profile...
Transcript of VERS 19-20 - GLG · 2019-09-20 · Litelux Colour Select LED Downlight Remote Driver Low profile...
MOVERSFAST
LIGHTING FOR THE TRADE
www.glg.lighting
FY19-20
32
STARBURST CRYSTAL ECO LED GEN 2
BWP ECO LED EMERGENCY WEATHERPROOF BATTEN
ECO LED PANEL GEN 2 PIERLUX ECO LED HIGHBAY GEN 5
MOTION SENSOR
ECO LED COLOUR SELECT BATTEN
CARLTON COLOUR SELECT LED BUNKER
LEDSMART+™ DIMMERS, SWITCHES AND TIMERS
LEDSMART+™ OCCUPANCY SENSOR
BWP ECO LED WEATHERPROOF BATTEN
SIRROCO II LED BULKHEAD JULUX LED 2 BULKHEAD
All products in this catalogue can be operated on 240V/ 50Hz
ORION ECO COLOUR SELECT LED OYSTER
SLIMLINE COLOUR SELECT LED OYSTER
LITELUX COLOUR SELECT LED DOWNLIGHT GEN 2
ECO LED EMERGENCY BATTEN
LITELUX COLOUR SELECT LED DOWNLIGHT REMOTE DRIVER
BLUETOOTH DOWNLIGHT PIERLUX PLUS COLOUR SELECT LED DOWNLIGHT
4
9
14 3016 17 18
LEDSMART+™ DIGITAL LEVEL DISPLAY
SMART SCAN TWO CHANNEL SENSOR
SMART SCAN SENSOR MKII - CEILING MOUNTED MOTION SENSOR
LEDSMART™ ADAPTIVE PHASE DIMMER
SITARA™ BLUETOOTH DIMMER
SITARA™ BLUETOOTH REMOTE GATEWAY
SITARA™ BLUETOOTH WALL SWITCH
35 36 37
15 31 32 33
34
29
10 11 12 13
FIREFLY2 LED EMERGENCY LIGHT
GUARDIAN 2 LED EMERGENCY FLOOD LIGHT
DIRECTOR 2 LED EXIT LIGHT
STINGRAY 2 LED EXIT LIGHT
25 26
27 28
5 6 8 24
Downlights
Panels Highbays
SHADOWECO LED FLOODLIGHT
SHADOW LED FLOODLIGHT MAXI MASTER GEN II LED FLOODLIGHT
HORNET LED FLOODLIGHT
2019 21 22
Floodlights
Emergency & Exit Lights
Battens Bunkers & Bulkheads Dimmers & Sensors
Oysters
7 23
CONTENTS
Dow
nlig
hts D
ownlights
54
The new generation Litelux Colour Select Downlight offers freedom of choice for the installer.
• One-box solution with 3-in-1 colour temperature
• Superior thermal performance, leading to a longer life
• IC-4 compliant which permits use when covered with thermal insulation in ceiling cavity
Applications
Commercial, residential, hospitality
Starburst Crystal Eco LED Gen 2Pierlite multi-function fixed or gimble downlight, a low maintenance solution for general accent lighting.
• One box solution with 2-in-1-cut-out sizes and fixed or gimble formats
• Cut-out 90mm, adjustable to 70mm by removing posts on trim
• Easy to install with flexible clips and pre-wired with 1.2m flex and plug
Applications
Commercial, residential, hospitality
CODE SYSTEM WATTAGE
EXIT LUMEN LUMEN/WATT CCT CRI DIMMING ENERGY SCHEME
CRYSECO1G2 11.5W 780 70lm/W 3000K >80 Phase IPART VEU REES
CRYSECO5G2 11.5W 880 80lm/W 4000K >80 Phase IPART VEU REES
CRYSECO1G2CRYSECO5G2
DLP63/4/65RWG2
Flush
Recessed
DLP63/4/65FWG2
3 YearWarranty
30,000hrLifetime (L70B50)
90mmCut-Out
90mmCut-Out
PhaseDimmable
PhaseDimmable
IC-4Rating
IP20Ingress
Protection Rating
Ta40Operational
Temperature Rating
Litelux Colour Select LED Downlight Gen 2
CODE SYSTEM WATTAGE
EXIT LUMEN LUMEN/WATT CCT CRI DIMMING ENERGY SCHEME
DLP63/4/65FWG2 7W 750 100lm/W 3000K/ 4000K/ 6500K
>80 Phase IPART VEU REES
DLP63/4/65RWG2 6.5W 730 110lm/W 3000K/ 4000K/ 6500K
>80 Phase -
3 YearWarranty
30,000hrLifetime (L70B50) Recessed
36,000hrLifetime (L70B50)
Flush
Ta40Operational
Temperature Rating
IP44Ingress
Protection Rating
ACCESSORY CODE DESCRIPTION
DLPTRMFS* Clip-on silver trim
DLPTRMFB* Clip-on black trim
DLPTRMFBC* Clip-on brushed chrome trim
DLPTRMRS Clip-on silver trim
DLPTRMRB Clip-on black trim
DLPTRMRBC Clip-on chrome trim
*Suitable for flush product variation only.
COMPATIBLE W
ITH
MEDM LEDSMART+
COMPATIBLE W
ITH
MEDM LEDSMART+
Dow
nlig
hts D
ownlights
76
CODE SYSTEM WATTAGE
EXIT LUMEN LUMEN/WATT CCT CRI DIMMING
DLP5BT/W 9W 800 80lm/W 2700K - 6500K >80 Phase
Litelux Colour Select LED Downlight Remote DriverLow profile Litelux Colour Select LED downlight with remote dimmable driver features excellent thermal performance and allows for easy single handed installation.
• One-box solution with 3-in-1 colour temperature
• Complete with 0.9m flex and plug
• IC-4 compliant which permits use when covered with thermal insulation in ceiling cavity
Applications
Commercial, residential, hospitality
CODE SYSTEM WATTAGE
EXIT LUMEN LUMEN/WATT CCT CRI DIMMING ENERGY SCHEME
DLP53/4/6FW 9W 830 90lm/W 3000K/ 4000K/ 6500K
>80 Phase IPART VEU REES
3 YearWarranty
36,000hrLifetime (L70B50)
90mmCut-Out
IP65Ingress
Protection Rating
Ta40Operational
Temperature Rating
Bluetooth Downlight
A high quality flush mounted, diffused, LED downlight with aluminium body. When connected to bluetooth, this downlight can be controlled from a smart phone or tablet.
• Bluetooth enabled driver
• Colour tuneable between 2700K and 6500K from smart phone or tablet
• Compatible with Diginet Sitara lighting control system
Applications
Commercial, residential, hospitality
36,000hrLifetime (L70B50)
Ta40Operational
Temperature Rating
IP65Ingress
Protection Rating
PhaseDimmable
DLP53/4/6FW
PhaseDimmable
90mmCut-Out
IC-4Rating
IC-4Rating
3 YearWarranty
*Phone not included
COMPATIBLE W
ITH
MEDM LEDSMART+
COMPATIBLE W
ITH
MEDM LEDSMART+
DLP5BT/W
Dow
nlig
hts
8 9
Pierlux Plus Colour Select LED DownlightPierlux Plus Colour Select LED is a high performance, stylish, simple and efficient downlight. Providing more flexibility and suits most applications.
• One-box solution with 3-in-1 colour temperature
• Recessed diffused front lens
• Easy to install with wide blade solid springs and 1.2m flex and plug
Applications
Commercial, residential, retail
CODE SYSTEM WATTAGE
EXIT LUMEN LUMEN/WATT CCT CRI DIMMING ENERGY SCHEME
PLUX43/4/6K 14W 1,200 105lm/W 3000K/ 4000K/ 6500K
>80 Phase IPART VEU REES
PLUX63/4/6KP 25W 2,600 105lm/W 3000K/ 4000K/ 6500K
>80 Phase IPART VEU REES
PLUX83/4/6K 35W 3,700 105lm/W 3000K/ 4000K/ 6500K
>80 Phase IPART VEU REES
3 YearWarranty
54,000hrLifetime (L80B50)
IP44Ingress
Protection Rating
Ta40Operational
Temperature Rating
PLUX43/4/6K PLUX63/4/6KP PLUX83/4/6K
Panels
Eco LED Panel Gen 2Pierlite Eco Colour Select LED Panel Gen 2 is a low profile luminaire solution, designed as an ideal replacement for traditional fluorescent recessed troffers.
• One-box solution with 3-in-1 colour temperature*
• Office compliant option available in UGR19
• Easy to install with remote constant driver and 1.2m flex and plug
Applications
Commercial, general lighting
CODE SYSTEM WATTAGE
EXIT LUMEN LUMEN/WATT
CCT CRI DIMENSIONS(H X W X L)
ECOPL063CSEG2 14W 1,400 107lm/W 4000K/ 5000K/ 6500K >80 30mm x 295mm x 595mm
ECOPL066CSEG2 27W 2,800 107lm/W 4000K/ 5000K/ 6500K >80 30mm x 595mm x 595mm
ECOPL123CSEG2 27W 2,800 107lm/W 4000K/ 5000K/ 6500K >80 30mm x 295mm x 1195mm
ECOPL126CSEG2 50W 4,800 96lm/W 4000K/ 5000K/ 6500K >80 30mm x 595mm x 1195mm
ECOPL1234UG19 34W 3,200 94lm/W 4000K >80 30mm x 295mm x 1195mm
ECOPL1234EG2 27W 2,900 107lm/W 4000K >80 30mm x 295mm x 1195mm
3 YearWarranty
IK07Impact Rating
50,000hrLifetime (L70B50)
Ta40Operational
Temperature Rating
IP40Ingress
Protection Rating
Non-Dimmable
ACCESSORY CODE DESCRIPTION
UDFRM/6-3 Universal deep frame 295 x 595
UDFRM/6-6 Universal deep frame 595 x 595
UDFRM/12-3 Universal deep frame 295 X 1195
UDFRM/12-6 Universal deep frame 595 x 1195
FRM/PM18W Plaster master frame 295 x 595
FRM/PM18WIDE Plaster master frame 595 x 595
FRM/PM36W Plaster master frame 295 x 1195
FRM/PM36WIDE Plaster master frame 595 x 1195
ECOPLWIREKITG2 Suspension kit Y-shape, 1M and 2 brackets
PhaseDimmable
ECOPL063CSEG2 ECOPL066CSEG2
ECOPL1234EG2ECOPL1234UG19ECOPL123CSEG2
100mmCut-Out
PLUX43/4/6K
150mmCut-Out
PLUX63/4/6KP
200mmCut-Out
PLUX83/4/6K
*For selected products only
COMPATIBLE W
ITH
MEDM LEDSMART+
10
Highbay S
ensor
11
Hig
hbay
s
Pierlux Eco LED Highbay Gen 5With improved lumen per wattage of up to 150lm/W, the new generation Pierlux Eco LED Highbay Gen 5 is the ultimate energy efficient replacement for traditional MH and MV highbay.
• One box solution with 4-in-1 Lumen Select and integrated 1-10V dimming
• Superior housing made with LM6 grade die cast aluminium
• Complete with 1.7m flex & plug with safety lanyard for quick and secure installation
Applications
Warehouse, industrial
CODE SYSTEM WATTAGE
EXIT LUMEN LUMEN/WATT CCT CRI DIMMING ENERGY SCHEME
ECOHB120W850G5 120W 18,000 150lm/W 5,000K >80 1-10V IPART VEU REES
ECOHB170W850G5 170W 25,500 150lm/W 5,000K >80 1-10V IPART VEU REES
ECOHB200W850LS 100W/ 150W/ 170W/ 200W
15,000/ 22,500/ 25,500/ 30,000
150lm/W 5,000K >80 - IPART VEU REES
ACCESSORY CODE DESCRIPTION
ECOHBSFHF HF motion sensor with on/off function and daylight sensing
ECOHB120BRKT G5 120W Surface mounting bracket kit
ECOHB170200BRKT G5 170W 200W Highbay surface mounting bracket kit
ECOHBG5ALREF G5 Annodised aluminium reflector
ECOHBG5LRCOV G5 Annodised aluminium dust cover 170 200W
ECOHBG5PCREF G5 Transparent polycarbonate reflector
ECOHBG5SMCOV G5 Annodised aluminium dust cover 120W
PRE SET VALUES
ROTARY SWITCH POSITION DETECTION RANGE HOLD TIME DAYLIGHT SENSOR
0 100% 5sec Disabled
1 100% 1min 2 lux
2 100% 5min 10 lux
3 100% 5min 30 lux
4 100% 5min 10 lux
5 100% 5min 30 lux
6 100% 5min Disabled
7 100% 10min 2 lux
8 100% 10min 10 lux
9 100% 10min 30 lux
A 100% 10min Disabled
B 75% 10min 30 lux
C 50% 10min 10 lux
D 100% 30min 50 lux
E 100% 30min Disabled
F 100% 5sec 2 lux
5 YearWarranty
1-10VDimmable
50,000hrLifetime
(L70/B50)
IP65Ingress
Protection Rating
Ta50Operational
Temperature Rating
IK08Impact Rating
LUMENSELECT
ECOHB170W850G5ECOHB200W850LS
ECOHBSFHF
ECOHB120W850G5
Pierlux Motion Sensor
Motion sensitive on/off switch, which turns on the light upon detection of motion, and turns off after a pre-selected hold-time when there is no movement.
• ‘Plug and go’ for fast installation, no additional terminations required
• Simple commissioning via rotary switch or an optional remote control
• Intelligent Photocell with daylight detection prior to motion detection
Applications
Industrial, floodlighting, installation up to 12m height
CODE DESCRIPTION COLOUR
ECOHBSFHF Motion sensor and light level sensor providing on/off control Black
PRCII Remote control for sensor -
5 YearWarranty
Detection Zone
(ø1 0m x H 12m)
Max Load 800W
IP65Ingress
Protection Rating
Non-Dimmable
12
OystersO
yste
rs
13
SENSOR SPECIFICATION*
Sensor type High frequency sensor
Detection zone Max: 10m (Ø) x 6m (H)
Detection range Select from 4 options; 100%, 75%, 50%, 10%
Hold-time Select from 4 options; 5s, 90s, 5min, 15min
Light level detection range
Select from 4 options; 2 Lux, 10 Lux, 50 Lux, disable
Orion Eco Colour Select LED OysterOrion Eco Colour Select LED Oyster is the perfect luminaire for concrete ceilings.
• One-box solution with 3-in-1 colour temperature
• Removeable trim for a different look
• Available in dimmable, non-dimmable and integrated HF sensor with standby function
Applications
Commercial, residential, hospitality
CODE SYSTEM WATTAGE
EXIT LUMEN LUMEN/WATT CCT CRI DIMMING
ORN16W3/4/6K 16W 1200/ 1300/ 1300
95lm/W 3000K/ 4000K/ 6000K
>80 -
ORN23W3/4/6K 23W 1900/ 2000/ 2000
95lm/W 3000K/ 4000K/ 6000K
>80 -
ORN16W3/4/6KD 17W 1200/ 1300/ 1300
95lm/W 3000K/ 4000K/ 6000K
>80 Phase
ORN23W3/4/6KD 24W 1900/ 2000/ 2000
95lm/W 3000K/ 4000K/ 6000K
>80 Phase
ORN23W3/4/6KS (HF Sensor)
23W 1900/ 2000/ 2000
95lm/W 3000K/ 4000K/ 6000K
>80 -
3 YearWarranty
36,000hrLifetime (L70B50)
Ta40Operational
Temperature Rating
IP54Ingress
Protection Rating
ORN16W3/4/6KORN16W3/4/6KD
ORN23W3/4/6KORN23W3/4/6KDORN23W3/4/6KS
PhaseDimmable
*Applicable to ORN23W3/4/6KS HF Sensor variation only.
Slimline Colour Select LED OysterThis low profile LED Oyster comes with quick fit mounting bracket and integral control gear.
• One-box solution with 3-in-1 colour temperature
• Aesthetically pleasing with a sleek and slimline form factor
• Easy to install with a large terminal block
Applications
Commercial, residential, hospitality
CODE SYSTEM WATTAGE
EXIT LUMEN LUMEN/WATT CCT CRI DIMMING
SLMOYS183/4/6K 18W 1500/ 1550/ 1600
90lm/W 3000K/ 4000K/ 6500K
>80 Phase
SLMOYS273/4/6K 27W 2300/ 2400/ 2400
90lm/W 3000K/ 4000K/ 6500K
>80 Phase
3 YearWarranty
54,000hrLifetime (L70B50)
IP54Ingress
Protection Rating
Ta40Operational
Temperature Rating
SLMOYS183/4/6K SLMOYS273/4/6K
PhaseDimmable
ø400ø300
(mm)(mm)
5050COMPATIBLE W
ITH
MEDM LEDSMART+
COMPATIBLE W
ITH
MEDM LEDSMART+
14
BattensB
atte
ns
15
Eco LED Colour Select BattenDesigned with the professional installer in mind, the ECO LED Batten is easy to install with quick connect driver one piece sealed LED module.
• One-box solution with 3-in-1 colour temperature
• Easy to wire with central and side cable access
• Integrated HF sensor with on/off switching based on movement
Applications
Commercial, residential, hospitality
CODE SYSTEM WATTAGE
EXIT LUMEN LUMEN/WATT CCT CRI ENERGY SCHEME
ECOBAT202ECS 20W 2300 110lm/W 4000K/ 5000K/ 6500K
>80 IPART VEU REES
ECOBAT404ECS 40W 4300 100lm/W 4000K/ 5000K/ 6500K
>80 IPART VEU REES
ECOBAT404ECSD (HF Sensor)
40W 4300 100lm/W 4000K/ 5000K/ 6500K
>80 IPART VEU REES
ACCESSORY CODE DESCRIPTION
WG2 Wireguard 600M c/w brackets
WG4 Wireguard 1200M c/w brackets
ECOBAT202ECS
ECOBAT404ECSECOBAT404ECSD
4 YearWarranty
54,000hrLifetime (L70B50)
Ta40Operational
Temperature Rating
IP20Ingress
Protection Rating
IK06Impact Rating
Non-Dimmable
SENSOR SPECIFICATION*
Sensor type High frequency sensor
Detection zone Max: 10m (Ø) x 6m (H)
Detection range Select from 4 options; 100%, 75%, 50%, 10%
Hold-time Select from 4 options; 5s, 90s, 5min, 15min
*Applicable to ECOBAT404ECSD HF Sensor variation only.
BWP Eco LED Weatherproof BattenThe BWP ECO LED weatherproof batten is the perfect LED solution for replacing conventional fluorescent weatherproof luminaires.
• Polycarbonate body with durable foam seal and frosted prismatic polycarbonate lens resists impact (IK08)
• 20mm cable entry with PG8, 5 gland and optional knockout at the opposite end
• Clip-in modular gear tray with safety lanyards for easy installation and maintenance
Applications
Commercial, industrial
CODE SYSTEM WATTAGE
EXIT LUMEN LUMEN/WATT CCT CRI ENERGY SCHEME
BWPECO202E4 20W 2000 100lm/W 4000K >80 IPART VEU REES
BWPECO202E6 20W 2000 100lm/W 6500K >80 IPART VEU REES
BWPECO224E4 22W 2200 100lm/W 4000K >80 IPART VEU REES
BWPECO224E6 22W 2200 100lm/W 6500K >80 IPART VEU REES
BWPECO454E4 45W 4500 100lm/W 4000K >80 IPART VEU REES
BWPECO454E6 45W 4500 100lm/W 6500K >80 IPART VEU REES
Non- Dimmable
3 YearWarranty
30,000hrLifetime (L70B50)
IP65Ingress
Protection Rating
Ta40Operational
Temperature Rating
IK08Impact Rating
VERSION L (MM) W (MM) H (MM)
20W 655 130 92
22W 1265 89 92
45W 1265 130 92
60W 1565 130 92 BWPECO454E4 BWPECO224E4BWPECO202E4 BWPECO224E6BWPECO454E6 BWPECO202E6
16
Bunkers &
BulkheadsB
unke
rs &
Bul
khea
ds
17
Carlton Colour Select LED BunkerAesthetically pleasing and functional, the Carlton bunker meets all the requirements of a well-designed outdoor fitting.
• One-box solution with 3-in-1 colour temperature and bonus decorative caged trim
• Easy to install with rear cable entry and suitable for wall and ceiling
• Available in 2 sizes (large and small) and 2 colour housing (white and black)
Applications
Commercial, residential, hospitality
CODE SYSTEM WATTAGE
EXIT LUMEN LUMEN/WATT CCT CRI SIZE HOUSING COLOUR
CB2746567 9W 650 70lm/W 3000K/ 4000K/ 6000K
>80 Small White
CB2746466 9W 650 70lm/W 3000K/ 4000K/ 6000K
>80 Small Black
CB2746971 14.5W 1100 75lm/W 3000K/ 4000K/ 6000K
>80 Large White
CB2746870 14.5W 1100 75lm/W 3000K/ 4000K/ 6000K
>80 Large Black
2 YearWarranty
30,000hrLifetime (L70B50)
IP54Ingress
Protection Rating
Ta40Operational
Temperature Rating
IK04Impact Rating
Non-Dimmable
CB2746466 CB2746567
CB2746870 CB2746971
Sirroco II LED BulkheadThis class II decorative outdoor bulkhead is built with superior material to withstand outdoor conditions.
• One-box solution with bonus decorative eyelid trim, different look same fitting for different areas
• Double-insulated fitting, no earthing required, ideal for residential retrofit
• “Fit and forget” with integrated HF sensor, light stays off when adequate daylight is detected
Applications
Commercial, residential, hospitality
CODE SYSTEM WATTAGE
EXIT LUMEN LUMEN/WATT CCT CRI DIMENSIONS HOUSING COLOUR
CBH49287WH 12W 1000 80lm/W 4000K >80 300mm x 90mm
White
CBH49285BK 12W 1000 80lm/W 4000K >80 300mm x 90mm
Black
CBH49289BKSEN (HF Sensor)
12W 1000 80lm/W 4000K >80 300mm x 90mm
Black
Non-Dimmable
3 YearWarranty
30,000hrLifetime (L70B50)
IP66Ingress
Protection Rating
Ta40Operational
Temperature Rating
IK10Impact Rating
CBH49289BKSENCBH49285BKCBH49287WH
ø300
90
(mm)SENSOR SPECIFICATION*
Sensor type High frequency sensor
Detection zone Max: 8m (Ø) x 5m (H)
Detection angle Select from 2 options; 50˚ or 100˚
Sensor sensitivity Select from 2 options; 50% or 100%
Hold-time Select from 4 options; 5s, 90s, 3min,10min
Light level detection range
Select from 4 options; 2 Lux, 10 Lux, 50 Lux, disable
Stand-by time Select from 4 options; 0s, 10s, 10min, +∞
Stand-by dim level Select from 2 options; 10% or 30%
*Applicable to CBH49289BKSEN HF Sensor variation only.
18
Bun
kers
& B
ulkh
eads
Floodlights
19
Julux LED 2 Bulkhead
Shadow LED Floodlight
Classic design with an Opal prismatic polycarbonate cover.
• Weather resistant and ideal for harsh outdoor conditions
• Integral constant current driver
• Optional integral motion sensor
Applications
Commercial, healthcare, residential
The Pierlite Shadow LED floodlight has the ability to illuminate small to medium spaces. It’s slimline and compact design makes it easy to install.
• Complete with 500mm flying lead for easy installation
• Trunnion arm with 45˚ offset for easy mounting and aiming
• Black powder coated die-cast aluminium body with excellent heat sinking capability
Applications
Commercial, residential
CODE SYSTEM WATTAGE EXIT LUMEN LUMEN/WATT CCT CRI
JULUXLED2 9W 660 70lm/W 6000K >70
CODE SYSTEM WATTAGE EXIT LUMEN LUMEN/WATT CCT CRI
SHADOW10BK 10W 800 80lm/W 4000K >70
SHADOW20BK 20W 1560 78lm/W 4000K >70
SHADOW30BK 30W 2700 90lm/W 4000K >70
1 YearWarranty
3 YearWarranty
35,000hrLifetime (L70B50)
40,000hrLifetime (L70B50)
IP65Ingress
Protection Rating
IP65Ingress
Protection Rating
Ta40Operational
Temperature Rating
Ta40Operational
Temperature Rating
Non-Dimmable
Non-Dimmable
JULUXLED2
SHADOW20BK SHADOW30BK
SHADOW10BK
Bun
kers
& B
ulkh
eads
20
FloodlightsFloo
dlig
hts
21
ShadowEco LED FloodlightThe Pierlite ShadowEco LEDis built with superior LM6 grade material, lightweight and easy to install.
• Hassle-free with pre-wired 1 meter lead and angled Trunnion arm for easy installation
• Textured tempered glass to minimize glaze, 316 grade stainless steel screws
• Black powder coated and made of LM6 die-cast aluminium ideal for harsh outdoor conditions
Applications
Industrial, general floodlighting
CODE SYSTEM WATTAGE
EXIT LUMEN LUMEN/WATT CCT CRI ENERGY SCHEME
SHADOWECO100BK 100W 10000 100lm/W 4000K >80 IPART VEU REES
SHADOWECO200BK 200W 20000 200lm/W 3000K >80 IPART VEU REES
SHADOWECO100BK SHADOWECO200BK
3 YearWarranty
50,000hrLifetime (L70B50)
IP65Ingress
Protection Rating
Ta40Operational
Temperature Rating
IK08Impact Rating
Non-Dimmable
Maxi Master Gen II LED FloodlightPierlite Maxi Master LED Floodlight GEN II range is designed for high-performance output and energy savings.
• Energy efficient LED floodlight, lower running costs
• Lightweight for easy installation
• Optional wire guard accessories available
Applications
Industrial, carparks
CODE SYSTEM WATTAGE
EXIT LUMEN LUMEN/WATT CCT CRI ENERGY SCHEME
MML50S 50W 5250 100lm/W 4000k >80 IPART VEU REES
MML100S 100W 12000 120lm/W 4000K >80 IPART VEU REES
MML200S 200W 24000 120lm/W 4000K >80 IPART VEU REES
MML300S 300W 36000 120lm/W 4000K >80 IPART VEU REES
MML100A 100W 12000 110lm/W 4000K >80 IPART VEU REES
MML200A 200W 22000 110lm/W 4000K >80 IPART VEU REES
MML300A 300W 33000 110lm/W 4000K >80 IPART VEU REES
5 YearWarranty
50,000hrLifetime (L70B50)
IP65Ingress
Protection Rating
Ta40Operational
Temperature Rating
IK08Impact Rating
ACCESSORY CODE DESCRIPTION
MML50WG 50W Maxi Master wire guard
MML100WG 100W Maxi Master wire guard
MML200WG 200W Maxi Master wire guard
MML300WG 300W Maxi Master wire guard
Non-Dimmable
MML200SMML100SMML100S MML300S
(mm)52965
350 444
495
(mm)60 342310
380 475
318288
60 (mm)
293 372
54250280
200 277
(mm)
22
Floo
dlig
hts Em
ergency & Exit Lights
23
Hornet LED FloodlightThis award winning LED floodlight brings the best performance and design in a compact, slimline package.
• Adjustable head 300˚ horizontal, 200˚ vertical with flexibility to direct the light (up/down/sideways)
• Complete with 1m lead for easy installation
• Retro-fit accessory included for easy installation onto existing floodlight mounting points
Applications
Commercial, residential, hospitality
CODE SYSTEM WATTAGE
EXIT LUMEN LUMEN/WATT CCT CRI ENERGY SCHEME
CFL20840 20W 1600 80lm/W 4000K >80 IPART VEU REES
CFL20830* 20W 1600 80lm/W 3000K >80 -
Non-Dimmable
3 YearWarranty
IP66Ingress
Protection Rating
Ta40Operational
Temperature Rating
IK07Impact Rating
30,000hrLifetime (L70B50)
CFL20840
*Available from November 2019.
BWP Eco LED Emergency Weatherproof BattenBuilt with LiFePO4 battery, this weatherproof batten is a robust emergency fitting ideal for outdoor use.
• Energy efficient LED weatherproof emergency luminaire AS2293 compliant
• Replaceable Lithium Iron Phosphate (LiFePO4) battery
• Emergency Operation: manual test
Applications
Commercial, industrial, indoor carparks
CODE SYSTEM WATTAGE
EXIT LUMEN LUMEN/WATT CCT CRI ENERGY SCHEME
BWPECO202E4M 20W 2000 100lm/W 4000K >80 -
BWPECO202E6M 20W 2000 100lm/W 6000K >80 -
BWPECO454E4M 45W 4500 100lm/W 4000K >80 IPART VEU REES
BWPECO454E6M 45W 4500 100lm/W 6000K >80 IPART VEU REES
BWPECO605E4M 60W 6000 100lm/W 4000K >80 -
BWPECO605E6M 60W 6000 100lm/W 6000K >80 -
Non-Dimmable
3 YearWarranty (including
battery)
50,000hrLifetime (L70B50)
IP65Ingress
Protection Rating
Ta40Operational
Temperature Rating
IK08Impact Rating
VERSION L (MM) W (MM) H (MM) A1 (MM) A2 (MM)
20W 655 130 92 420 530
45W 1265 130 92 900 1010
60W 1565 130 92 1000 1110
BWPECO202E6M BWPECO454E6MBWPECO202E4M BWPECO454E4MBWPECO605E6M BWPECO605E4M
CODE SYSTEM WATTAGE (EMERGENCY MODE)
EXIT LUMEN(EMERGENCY MODE)
EMERGENCY CALSSIFICATION BATTERY SPECIFICATION
BWPECO202E4M 2 287 C0/C180: D40 C90/C270: D25 LiFePO4 6.4V 1.5AH
BWPECO202E6M 2 287 C0/C180: D40 C90/C270: D25 LiFePO4 6.4V 1.5AH
BWPECO454E4M 4 529 C0/C180: D63 C90/C270: D50 LiFePO4 6.4V 3.0AH
BWPECO454E6M 4 516 C0/C180: D63 C90/C270: D50 LiFePO4 6.4V 3.0AH
BWPECO605E4M 4 521 C0/C180: D63 C90/C270: D50 LiFePO4 6.4V 3.0AH
BWPECO605E6M 4 498 C0/C180: D63 C90/C270: D50 LiFePO4 6.4V 3.0AH
Floo
dlig
hts
24
Emergency &
Exit LightsEmer
genc
y &
Exi
t Lig
hts
25
CODE SYSTEM WATTAGE
EXIT LUMEN LUMEN/WATT CCT CRI ENERGY SCHEME
ECOBAT404E4/ME 40W 4010 100lm/W 4000K >80 IPART VEU REES
ECOBAT404E6/ME 40W 3940 98lm/W 6500K >80 IPART VEU REES
ECOBAT505E4/ME 50W 4760 95lm/W 4000K >80 -
ECOBAT505E6/ME 50W 4510 90lm/W 6500K >80 -
Eco LED Emergency BattenEnergy efficient and reliable, the Eco LED Emergency batten is ideal for indoor use.
• Available in multiple sizes and wattages: 1164mm (20W and 40W) and 1500mm (50W)
• Maintained Emergency operation
• Replaceable Lithium Iron Phosphate (LiFePO4) battery
Applications
Commercial, industrial, stairwells
Non-Dimmable
3 YearWarranty(including
battery)
50,000hrLifetime (L70B50)
IP20Ingress
Protection Rating
Ta40Operational
Temperature Rating
IK06Impact Rating
ECOBAT404E4/MEECOBAT404E6/ME
ECOBAT505E6/MEECOBAT505E4/ME
CODE SYSTEM WATTAGE (EMERGENCY MODE)
EXIT LUMEN(EMERGENCY MODE)
EMERGENCY CALSSIFICATION BATTERY SPECIFICATION
ECOBAT404E4/ME 3.8W 479 C0/C180: D63 C90/C270: D40 LiFePO4 4 cell 6.4V 3AH
ECOBAT404E6/ME 3.8W 476 C0/C180: D63 C90/C270: D40 LiFePO4 4 cell 6.4V 3AH
ECOBAT505E4/ME 3.8W 434 C0/C180: D63 C90/C270: D40 LiFePO4 4 cell 6.4V 3AH
ECOBAT505E6/ME 3.8W 463 C0/C180: D63 C90/C270: D40 LiFePO4 4 cell 6.4V 3AH
Guardian 2 LED Emergency FloodlightThe affordable and reliable LED emergency floodlight just got better - now complete with Lithium Iron Phosphate battery.
• Non-corrosive polycarbonate housing and reflectors
• IP20 as standard; weatherproof enclosure available with IP65 certification
• Replaceable Lithium Iron Phosphate (LiFePO4) battery
Applications
Commercial, industrial
CODE SYSTEM WATTAGE EXIT LUMEN LUMEN/WATT CCT CRI
GRLED7FL-L 4W 616 100lm/W 4000K >80
Non-Dimmable
3 YearWarranty(including
battery)
50,000hrLifetime (L70B50)
IP20Ingress
Protection Rating
Ta40Operational
Temperature Rating
ACCESSORY CODE DESCRIPTION
GRWPENCL IP65 enclosure
BATPK3200/2L21 LiFePO4 battery, 2 cell 6.4V 3200 mAh
GRLED7FL-L
350
80
(mm)
26
Emergency &
Exit LightsEmer
genc
y &
Exi
t Lig
hts
27
Director 2 LED Exit LightGeneral purpose traditional interior exit luminaire, in LED and LiFeP04 battery.
• Wall and ceiling mount,complete with replaceable Lithium Iron Phosphate (LiFeP04) battery
• Includes all pictogram inserts and one box solution with a fully integrated assembly makes for easier installation
• 24m viewing distance
Applications
Commercial, retail, hospitality, industrial
CODE SYSTEM WATTAGE EXIT LUMEN LUMEN/WATT
DIRLEDPDSL (Ceiling) 4.6W 220 48lm/W
DIRLEDPSSL (Wall) 4.6W 220 48lm/W
Non-Dimmable
3 YearWarranty(including
battery)
50,000hrLifetime (L70B50)
IP20Ingress
Protection Rating
Ta40Operational
Temperature Rating
24mViewing
Distance
ACCESSORY CODE DESCRIPTION
BATPK1500/1L11 LiFePO4 battery, 1 cell 3.2V 1500 mAh
DIRLEDPDSL DIRLEDPSSL
Wall
Ceiling
DIRLEDPSSL (WALL MOUNT) AS/NZS 2293.1:2018 CLASSIFICATION TABLE
ALLOWABLE LUMINAIRE MOUNTING HEIGHT (M)
LUMINAIRE MAXIMUM SPACING FOR EACH PLANE (M)
C0 C90 C180 C270
2.1 3.7 4.1 0 4.1
2.4 0 4.1 0 4.1
2.7 0 0 0 0
DIRLEDPDSL (CEILING MOUNT) AS/NZS 2293.1:2018 CLASSIFICATION TABLE
ALLOWABLE LUMINAIRE MOUNTING HEIGHT (M)
LUMINAIRE MAXIMUM SPACING FOR EACH PLANE (M)
C0/C180 C90/C270
2.1 7.8 8.5
2.4 8 8.8
2.7 8.1 8.9
Stingray 2 LED Exit LightA stylish, quick connect LED exit luminaire for interior exit sign application.
• Ceiling mount and optional wall mount
• Includes all pictogram inserts and one box solution with a fully integrated assembly makes for easier installation
• 24m viewing distance
• Optional IP65 kit
Applications
Commercial, residential, hospitality, retail
CODE SYSTEM WATTAGE EXIT LUMEN LUMEN/WATT
STLED-L (White) 4.6W 124 27lm/W
STTLED-L (Black) 4.6W 124 27lm/W
ACCESSORY CODE DESCRIPTION
BATPK1500/1L11 LiFePO4 battery, 1 cell 3.2V 1500 mAh
AQUALOCK-W IP65 enclosure
99023330 Rod suspension kit 1600mm white
EXCB Cantilever bracket wall mount kit
STLED-LSTTLED-L
Non-Dimmable
3 YearWarranty(including
battery)
50,000hrLifetime (L70B50)
IP20Ingress
Protection Rating
Ta40Operational
Temperature Rating
24mViewing
Distance
(mm)395
81
245
STLED-L (STANDARD) AS/NZS 2293.1:2018 CLASSIFICATION TABLE
ALLOWABLE LUMINAIRE MOUNTING HEIGHT (M)
LUMINAIRE MAXIMUM SPACING FOR EACH PLANE (M)
C0/C180 C90/C270
2.1 6.5 5
2.4 6.5 5.2
2.7 6.5 5.2
28
Emer
genc
y &
Exi
t Lig
hts D
imm
ers & S
ensors
29
FFRLED2 & FFRLEDBK2 AS/NZS 2293.1:2018 CLASSIFICATION TABLE
ALLOWABLE LUMINAIRE MOUNTING HEIGHT (M)
LUMINAIRE MAXIMUM SPACING FOR EACH PLANE (M)
C0 C90/270 C180
2.1 11.5 11.5 11.5
2.4 13.2 13.2 13.2
2.7 14.8 14.8 14.8
3 16.5 16.5 16.5
3.3 17.6 17.6 17.6
3.6 18 18 18
4 18.5 18.5 18.5
4.5 19 19 19
5 19.5 19.5 19.5
6 20.1 20.1 20.1
Firefly 2 LED Emergency LightThe affordable and reliable LED emergency light with Lithium Iron Phosphate battery One box solution with a fully integrated assembly.
• Easy installation, flex and plug included
• Optional surface mounting kit
• Replaceable Lithium Iron Phosphate (LiFePO4) battery
Applications
Commercial, residential, hospitality, retail
CODE SYSTEM WATTAGE EXIT LUMEN LUMEN/WATT
FFRLED2 (White) 2.5W 174 93lm/W
FFRLEDBK2 (Black) 2.5W 174 93lm/W
ACCESSORY CODE DESCRIPTION
FFSLEDKITWH Surface mounted kit (white)
FFSLEDKITBK Surface mounted kit (black)
BATPK1200/4L41 LiFePO4, 4 cell 6.4V 1200 mAh rechargeable battery pack
FFRLED2FFRLEDBK2
Non-Dimmable
3 YearWarranty (including
battery)
50,000hrLifetime (L70B50)
IP20Ingress
Protection Rating
Ta40Operational
Temperature Rating
LEDsmart™ Adaptive Phase DimmerProviding optimised dimming of LED based lamps and drivers, this high quality, two-wire phase control wall plate dimmer has a minimum load rating of 2W, allowing it to adapt to a wide range of available LED drivers.
• Rotary control with mechanical adjustment for minimum brightness level
• Separately switched 2-wire design - no neutral wire connection required
• Soft start to help prolong the lamp and driver life
Applications
Commercial, residential, hospitality
CODE DESCRIPTION
MEDM Dimmer precision phase adaptive mechanism
ACCESSORY CODE DESCRIPTION
DGACCESSPK5 5x Black dials for MEDM dimmers
2 YearWarranty
IP20Ingress
Protection Rating
Ta50Operational
Temperature Rating
MEDM
Emer
genc
y &
Exi
t Lig
hts
30
Dim
mers &
SensorsD
imm
ers
& S
enso
rs
31
LEDsmart+™ Dimmers, Switches & TimersProviding optimised dimming of LED based lamps and drivers, this high quality, two-wire phase control dimmer can be connected in parallel to other LEDsmart+ devices to provide a simple solution to multi-way control.
• Suitable for one-way, two-way, three-way and multi-way dimming
• MultiMate™ technology allows multi-way dimming/switching with no extra wires
• Active only two wire connection - no neutral required
Applications
Commercial, residential, hospitality
CODE DESCRIPTION COMPATIBLE WITH:
MMDM/RT Digital rotary dimmer/switch Phase dimming product
MMDM/PB Push button dimmer/switch Phase dimming product
MMSW/PB Push button switch Phase dimming product
MMTH/PB Push button hour timer Phase dimming product
MMTM/PB Push button minute timer Phase dimming product
ACCESSORY CODE DESCRIPTION
MMCE/RT (suitable for RT only)
LEDsmart+ rotary controller and wall mounting kit
MMCE/SS1 (suitable for PB only)
LEDsmart+ circular push button enclosure and mounting kit - single
MMCE/SS2 (suitable for PB only)
LEDsmart+ circular push button enclosure and mounting kit - double
DGACCESSPK1 Coloured bezel adaptor kits LEDsmart and Rapix push buttons
DGACCESSPK2 Push button adaptor kit for LEDsmart+ and Rapix push button SW
DGACCESSPK3 Rotary adaptor kit for LEDsmart+ and Rapix rotary products
DGACCESSPK6 5x black dials for LEDsmart+MMDM/RT dimmers
2 YearWarranty
IP20Ingress
Protection Rating
Ta50Operational
Temperature Rating
MMDM/RT MMDM/PBMMSW/PBMMTH/PBMMTM/PB
LEDsmart+™ Occupancy SensorThe LEDsmart+ Occupancy Sensor can be used by itself or connected to other LEDsmart+ devices. By itself, the sensor switches lighting when movement is detected.
• Ceiling mount included – no other mounting hardware needed
• Sensors can be wired in parallel to extend coverage area
• Timeout from 1 minute to 60 minutes
Applications
Commercial, residential, hospitality
CODE DESCRIPTION
MMSE/PR LEDsmart+ PIR occupancy sensor with MultiMate technology
2 YearWarranty
IP20Ingress
Protection Rating
Ta50Operational
Temperature Rating
MMSE/PR
32
Dim
mers &
SensorsD
imm
ers
& S
enso
rs
33
CODE DESCRIPTION
MMDM/DD LEDsmart+ digital level display
LEDsmart+™ Digital Level DisplayThis device can be used in conjunction with a dimmer to display the current dimmed level via a circular array of 16 LED’s and fits into a standard Australian wall plate aperture.
• 2-wire device – connects to active and load only, no neutral connection required
• Plain white front face or alternative front face with light globe icon
• Includes alternative light pipes to change the LED indicator display colour from white to orange, green or blue
Applications
Commercial, residential, hospitality
2 YearWarranty
IP20Ingress
Protection Rating
Ta50Operational
Temperature Rating
MMDM/DD
Smart Scan Two Channel SensorPierlite Smart Scan flush mount sensor package consisting of a small 360˚ passive infrared sensor head and a control/relay module.
• Recessed Flush Mount 360˚ PIR Presence Sensor with two channel control module option
• 360˚ detection zone up to 7m diameter at mounting height of 2.7m
• Flame retardant polycarbonate body conveniently packed with remote driver
Applications
Commercial, residential, hospitality
CODE DESCRIPTION
SMARTSCAN2 360˚ PIR sensor with two channel 16A sensor control module
SMARTSCAN2
2 YearWarranty
IP20Ingress
Protection Rating
54mmCut-Out
Ta50Operational
Temperature Rating
50,000hrLifetime
34
Dim
mers &
SensorsD
imm
ers
& S
enso
rs
35
CODE DESCRIPTION
DGSMARTSCAN1HD Smart Scan MK2 360˚ PIR HD sensor 1 channel 16A output
Smart Scan Sensor MKII- Ceiling Mounted Motion SensorThe ceiling mounted motion sensors consists of two items; a 360˚ high definition passive infrared (HDIR™) sensor head and a control/relay module.
• High sensitivity 360˚ detection array designed for both minor and major movement applications
• Integrated light level detector to inhibit switch-on if there is sufficient natural light available
• Hidden yet easily accessible sensor head adjustment controls for time-out and light level adjustment
Applications
Commercial, residential, hospitality
DGMSMARTSCAN1HD
2 YearWarranty
IP20Ingress
Protection Rating
52mmCut-Out
Ta50Operational
Temperature Rating
STDM/BT
CODE DESCRIPTION
STDM/BT Diginet Sitara bluetooth wireless dimmer 1 channel 400W
Sitara™ Bluetooth DimmerThe Sitara Bluetooth Wireless Dimmer provides remote dimming and on/off control via Bluetooth connection to a smart device running the iOS or Android operating systems.
• Integrates with Diginet LEDsmart+ switches and dimmers
• No PC required for set up or operation
• Suitable for mounting in a ceiling void and fits through a 90mm downlight cut-out
Applications
Commercial, residential
Bluetooth2 YearWarranty
IP20Ingress
Protection Rating
36
Dim
mers &
SensorsD
imm
ers
& S
enso
rs
37
Sitara™ Bluetooth Wall SwitchThese sleek wireless touch-based wall switches can be placed anywhere and moved at any time. The switches connect wirelessly to Sitara Bluetooth Dimmers and are setup using the iOS/Android Avi-on App.
• Touch based control, including on/off and dimming
• Wireless range of up to 30m to the nearest Sitara Bluetooth Mesh device
• Battery life of 1-2 years with normal daily use
Applications
Commercial , residential
CODE DESCRIPTION
STWS/BT Sitara battery operated bluetooth wall switch touch slider
STWS/BT
Bluetooth2 YearWarranty
IP20Ingress
Protection Rating
COMPATIBLE W
ITH
BLU
ETO
OTH DOWNLIGHT
CODE DESCRIPTION
STRG/BT Sitara remote access bridge bluetooth WI-FI
Sitara BluetoothRemote GatewayThe Sitara Bluetooth Remote Gateway and the Avi-on App work seamlessly together to enable a homeowner to control lighting when they are away from home using a smart phone, tablet or web browser.
• Only requires a standard wireless router connection and internet access
• Connect a Sitara system to the internet (not required for local Bluetooth connection)
• Remotely monitor Sitara devices when not at home
Applications
Residential
Bluetooth2 YearWarranty
IP20Ingress
Protection Rating
COMPATIBLE W
ITH
BLU
ETO
OTH DOWNLIGHT
38
Downlights
Bunkers & Bulkheads
Panels
Highbays
Oysters
Battens
Floodlights
CODE ENERGY SCHEME IP/IK RATING
PAGE
CRYSECO1G2 IPART VEU REES IP20 4
CRYSECO5G2 IPART VEU REES IP20 4
DLP63/4/65FWG2 IPART VEU REES IP44 5
DLP63/4/65RWG2 - IP44 5
DLP53/4/6FW IPART VEU REES IP65 6
DLP5BT/W - IP65/ IK09
7
PLUX63/4/6KP IPART VEU REES IP44 8
PLUX83/4/6K IPART VEU REES IP44 8
PLUX43/4/6K IPART VEU REES IP44 8
CODE ENERGY SCHEME IP/IK RATING
PAGE
CB2746870 - IP54/ IK04
16
CB2746466 - IP54/ IK04
16
CB2746971 - IP54/ IK04
16
CB2746567 - IP54/ IK04
16
CBH49289BKSEN - IP66/ IK10
17
CBH49285BK - IP66/ IK10
17
CBH49287WH - IP66/ IK10
17
JULUXLED2 - IP65 18
CODE ENERGY SCHEME IP/IK RATING
PAGE
ECOPL063CSEG2 - IP40 9
ECOPL066CSEG2 - IP40 9
ECOPL1234EG2 - IP40 9
ECOPL1234UG19 - IP40 9
ECOPL123CSEG2 - IP40 9
CODE ENERGY SCHEME IP/IK RATING
PAGE
ECOHB120W850G5 IPART VEU REES IP65/ IK08
10
ECOHB170W850G5 IPART VEU REES IP65/ IK08
10
ECOHB200W850LS IPART VEU REES IP65/ IK08
10
ECOHBSFHF - IP65 11
CODE ENERGY SCHEME IP/IK RATING
PAGE
ORN16W3/4/6K IPART VEU REES IP54 12
ORN23W3/4/6K IPART VEU REES IP54 12
ORN16W3/4/6KD - IP54 12
ORN23W3/4/6KD - IP54 12
ORN23W3/4/6KS IPART VEU REES IP54 12
SLMOYS183/4/6K - IP54 13
SLMOYS273/4/6K - IP54 13
CODE ENERGY SCHEME IP/IK RATING
PAGE
ECOBAT202ECS IPART VEU REES IP20/ IK06
14
ECOBAT404ECS IPART VEU REES IP20/ IK06
14
ECOBAT404ECSD IPART VEU REES IP20/ IK06
14
BWPECO454E4 IPART VEU REES IP65/ IK08
15
BWPECO224E4 IPART VEU REES IP65/ IK08
15
BWPECO202E4 IPART VEU REES IP65/ IK08
15
BWPECO224E6 IPART VEU REES IP65/ IK08
15
BWPECO454E6 IPART VEU REES IP65/ IK08
15
BWPECO202E6 IPART VEU REES IP65/ IK08
15
CODE ENERGY SCHEME IP/IK RATING
PAGE
SHADOW10BK - IP65 19
SHADOW20BK - IP65 19
SHADOW30BK - IP65 19
SHADOWECO100BK IPART VEU REES IP65/ IK08
20
SHADOWECO200BK IPART VEU REES IP65/ IK08
20
MML50S IPART VEU REES IP65/ IK08
21
INDEXFloodlights
Emergency/Exit Lights
Dimmers & Sensors
Dimmers & Sensors
CODE ENERGY SCHEME IP/IK RATING
PAGE
BWPECO202E6M - IP65/ IK08
22
BWPECO454E6M IPART VEU REES IP65/ IK08
23
BWPECO202E4M - IP65/ IK08
23
BWPECO454E4M IPART VEU REES IP65/ IK08
23
BWPECO605E6M - IP65/ IK08
23
BWPECO605E4M - IP65/ IK08
23
ECOBAT404E4/ME IPART VEU REES IP20/ IK06
24
ECOBAT505E6/ME - IP20/ IK06
24
ECOBAT404E6/ME IPART VEU REES IP20/ IK06
24
ECOBAT505E4/ME - IP20/ IK06
24
GRLED7FL-L - IP20 25
DIRLEDPDSL - IP20 26
DIRLEDPSSL - IP20 26
STLED-L - IP20 27
STTLED-L - IP20 27
FFRLED2 - IP20 28
FFRLEDBK2 - IP20 28
CODE ENERGY SCHEME IP/IK RATING
PAGE
MEDM - IP20 29
MMDM/RT - IP20 30
MMDM/PB - IP20 30
MMSW/PB - IP20 30
ENERGY SAVINGS SCHEME
CODE ENERGY SCHEME IP/IK RATING
PAGE
MML100S IPART VEU REES IP65/ IK08
21
MML200S IPART VEU REES IP65/ IK08
21
MML300S IPART VEU REES IP65/ IK08
21
CFL20840 IPART VEU REES IP66/ IK07
22
CFL20830 - IP66/IK07
22
CODE ENERGY SCHEME IP/IK RATING
PAGE
MMTH/PB - IP20 30
MMTM/PB - IP20 30
MMSE/PR - IP20 31
MMDM/DD - IP20 32
SMARTSCAN2 - IP20 33
DGSMARTSCAN1HD - IP20 34
STDM/BT - IP20 35
STWS/BT - IP20 36
STRG/BT - IP20 37
Energy saving schemes are financial incentives introduced by state government to encourage businesses to retrofit or select energy efficient LED products in their facilities.
Majority of Pierlite products are approved by the respective schemes. Look out for the icons next to the product codes.
IPART
Independent Pricing and Regulatory Tribunal (NSW)
VEU
Victorian Energy Upgrades (VIC) (formerly VEET)
REES
Victorian Energy Upgrades (SA)
39
4140
Ingress protection ratings (IP)
The resistive performance of fittings to solids and liquids is indicated by the
IP (Ingress Protection) prefix followed by two numbers.
The first number indicates the measure of protection against the ingress of solids. For instance:
The second number indicates the measure of protection against the ingress of liquids. For instance:
Ingress Protection (IP) Specification Guide
Protection against the ingress of solid objects IP.1X Protection against the ingress of liquids IP.X1
IP No.
Example Protection against contact and ingress of objects
Tests Symbol IP No.
Example Protection against contact and ingress of water
Tests Symbol
50Protected against solid objects greater than 50mm ø
A large surface of the body, such as a hand (but no protection against deliberate access). Solid objects exceeding 50mm in diameter.
Protected against dripping water
Dripping water (vertically falling drops) shall have no harmful effect
12.5
Protected against solid objects greater than 12mm ø
Fingers or similar objects not exceeding 80 mm in length. Solid objects exceeding 12mm in diameter.
15°
Protected against dripping water when tilted up to 15°
Vertically dripping water shall have no harmful effect when the enclosure is tilted at any angle up to 15° from its normal position
Protected against solid objects greater than 2.5mm ø
Tools, wires, etc., of diameter or thickness greater than 2.5mm. Solid objects exceeding 2.5mm in diameter.
60° Protected against spraying water
Water falling as a spray at an angle up to 60° from the vertical shall have no harmful effect
Protected against solid objects greater than 1.0mm ø
Wires or strips of thickness greater than 1.0mm. Solid objects exceeding 1.0mm in diameter.
Protected against splashing water
Water splashed against the enclosure from any direction hall have no harmful effect
Dust protected Ingress of dust is not totally prevented but dust does not enter in sufficient quantity to interfere with satisfactory operation of the equipment.
Ø6.3
Protected against water jets
Water projected by a nozzle against the enclosure from any direction shall have no harmful effect
Dust tight No ingress of dust.
Ø12.5
Protected against heavy seas
Water from heavy seas or water projected in powerful jets shall not enter the enclosure in harmful quantities
15cm
1m
Protected against the effects of immersion
Ingress of water in a harmful quantity shall not be possible when the enclosure is immersed in water under defined conditions of pressure and time
mProtected against submersion
The equipment is suitable for continuous submersion in waterunder conditions which shall be specified by the manufacturer.
NOTE Normally, this will mean that the equipment is hermetically sealed. However, with certain types of equipment, it can mean that water can enter but only in such a manner that it produces no harmful effects.
Defined by IEC 60598
IP1X
IP2X
IP3X
IP4X
IP5X
IP6X
IPX1
IPX2
IPX3
IPX4
IPX5
IPX6
IPX7
IPX8
IP1X IPX1
IPX2
IPX3
IPX4
IPX5
IPX5
IPX6
IPX7
IPX8
IP2X
IP2X
IP3X
IP4X
IP5X
IP6X
IP67 IP68
IP65IP44 IP44
IP20
IP23
www.gerardlighting.co.nz
P: 0508 743 754F: 0508 743 755
9 Levene Place, Mount Wellington, Auckland 1060, New Zealand PO Box 53045, Auckland Airport, Auckland 2150, New Zealand
Ingress protection ratings (IP)
The resistive performance of fittings to solids and liquids is indicated by the
IP (Ingress Protection) prefix followed by two numbers.
The first number indicates the measure of protection against the ingress of solids. For instance:
The second number indicates the measure of protection against the ingress of liquids. For instance:
Ingress Protection (IP) Specification Guide
Protection against the ingress of solid objects IP.1X Protection against the ingress of liquids IP.X1
IP No.
Example Protection against contact and ingress of objects
Tests Symbol IP No.
Example Protection against contact and ingress of water
Tests Symbol
50Protected against solid objects greater than 50mm ø
A large surface of the body, such as a hand (but no protection against deliberate access). Solid objects exceeding 50mm in diameter.
Protected against dripping water
Dripping water (vertically falling drops) shall have no harmful effect
12.5
Protected against solid objects greater than 12mm ø
Fingers or similar objects not exceeding 80 mm in length. Solid objects exceeding 12mm in diameter.
15°
Protected against dripping water when tilted up to 15°
Vertically dripping water shall have no harmful effect when the enclosure is tilted at any angle up to 15° from its normal position
Protected against solid objects greater than 2.5mm ø
Tools, wires, etc., of diameter or thickness greater than 2.5mm. Solid objects exceeding 2.5mm in diameter.
60° Protected against spraying water
Water falling as a spray at an angle up to 60° from the vertical shall have no harmful effect
Protected against solid objects greater than 1.0mm ø
Wires or strips of thickness greater than 1.0mm. Solid objects exceeding 1.0mm in diameter.
Protected against splashing water
Water splashed against the enclosure from any direction hall have no harmful effect
Dust protected Ingress of dust is not totally prevented but dust does not enter in sufficient quantity to interfere with satisfactory operation of the equipment.
Ø6.3
Protected against water jets
Water projected by a nozzle against the enclosure from any direction shall have no harmful effect
Dust tight No ingress of dust.
Ø12.5
Protected against heavy seas
Water from heavy seas or water projected in powerful jets shall not enter the enclosure in harmful quantities
15cm
1m
Protected against the effects of immersion
Ingress of water in a harmful quantity shall not be possible when the enclosure is immersed in water under defined conditions of pressure and time
mProtected against submersion
The equipment is suitable for continuous submersion in waterunder conditions which shall be specified by the manufacturer.
NOTE Normally, this will mean that the equipment is hermetically sealed. However, with certain types of equipment, it can mean that water can enter but only in such a manner that it produces no harmful effects.
Defined by IEC 60598
IP1X
IP2X
IP3X
IP4X
IP5X
IP6X
IPX1
IPX2
IPX3
IPX4
IPX5
IPX6
IPX7
IPX8
IP1X IPX1
IPX2
IPX3
IPX4
IPX5
IPX5
IPX6
IPX7
IPX8
IP2X
IP2X
IP3X
IP4X
IP5X
IP6X
IP67 IP68
IP65IP44 IP44
IP20
IP23
www.gerardlighting.co.nz
P: 0508 743 754F: 0508 743 755
9 Levene Place, Mount Wellington, Auckland 1060, New Zealand PO Box 53045, Auckland Airport, Auckland 2150, New Zealand
IK ratingsDegree of Impact Protection EN62262.
IK rating system is an International classification showing degrees of protection
provided by luminaires against external mechanical impacts.
c) shower without basin but with permanent fixed partition
permanent partition
0.10m
zone 1
zone 0
zone 2
zone 0
2.25m
outs
ide
zone
s
outside zones
IP ratings in damp areas
Application of IP ratings within damp locations
BS 7671: section 701 (17th Edition)
Guidance is provided by the above standard to the selection of luminaires within
locations containing baths, showers and cabinets that contain a shower /and or
bath along with the surrounding areas.
a) bath tub
outside zones
window
recess
zone 2
zone 1
zone 0
0.6m
2.25mzone 2
outs
ide
zone
s
*Zone 1 if the space is accessible without the use of a tool. Spaces under the bath, accessible only with the use of a tool are outside the zones.
b) shower with basin
outside zones
recessed luminaire
zone 1 zone 2
zone 0
0.6m
2.25m
outs
ide
zone
s
*
Number Measure of protection – impact energy (joules)
Test
No protection to this standard -
0.15 0.20kg impact
0.20 0.20kg impact
0.35 0.20kg impact
0.50 0.20kg impact
0.70 0.20kg impact
1.00 0.50kg impact from 200mm
2.00 0.50kg impact from 400mm
5.00 1.70kg impact from 295mm
10.00 5.00kg impact from 200mm
20.00 5.00kg impact from 400mm
When higher impact energy protection is required 50 joules is recommended.
Defined by UTE 20010
IK02
IK01
IK00
IK03
IK04
IK05
IK06
IK07
IK08
IK09
IK10
www.gerardlighting.co.nz
P: 0508 743 754F: 0508 743 755
9 Levene Place, Mount Wellington, Auckland 1060, New Zealand PO Box 53045, Auckland Airport, Auckland 2150, New Zealand
IK00
IK01
IK02
IK03
IK04
IK05
IK06
IK07
IK08
IK09
IK10
Australian Standard on Recessed luminaires (ASNZS 60598.2.2-2016) otherwise known as IC rating has been in placed since 2018. The standard stipulates the classifications of various type of recessed fittings suitable for different installation types, with the purpose of reducing risk of ignition due to inadequate separate between fitting and combustible building elements such as thermal insulation and/or debris. Pierlite’s range of recessed fitting are designed to be fit for the application and at the highest safety standard.
IC-4
• Suitable for residential or commercial use
• Fitting can be covered with building insulation
• Can be used where air transfer is not permitted or not desired between living space & roof space
IC
• Suitable for residential or commercial use
• Fitting can be loosely covered with building insulation
• Can be used where some air transfer is permitted or desired between living space & roof space
CA 90
• Suitable for residential or commercial use
• Fitting cannot be covered with building insulation
• Insulation can be placed against the sides of the fitting
DO NOT COVER
• Suitable for residential or commercial use in AU. Not for residential use in NZ
• Fitting cannot be covered with building insulation
• Insulation must be placed as per clearance distances according to manufacturer’s installation guide
NON-IC
• Suitable for commercial use only
• Not suitable for use in residential dwellings or other places where insulation may be installed now or in the future
• Not tested for use with building insulation
4342
1-10V Dimming 1-10V (Analogue) Dimming uses an analogue signal rather than a digital signal. It is a universal protocol, so all 1-10V drivers operate in the same manner. Each downlight requires a standard 2C+E plus two control lines to carry the low voltage signal (polarity sensitive). You will also require a potentiometer (or some other 1-10V Dimming controller). • Additional 2-Core LV control cable is required. • Dedicated 1-10V interface or potentiometer is
required to control this driver • Available in out-puts ranging from 350mA – 1400mA DALI Digital Addressable Lighting Interface – DALI – is a universal protocol (IEC 62386), designed to allow varying manufacturers products to all work on the same system. So it doesn’t matter whose light fitting you are using, if it is DALI it will work on a DALI controlled system. Up to 64 light fittings can be controlled per DALI line, buildings can have multiple DALI lines. Wiring to a DALI downlight requires a standard 2C+E, plus two DALI control lines (not polarity sensitive).
TCI DRIVER TRIDONIC DRIVER
• Additional 2-Core control cable is required. • Dedicated DALI interface or Control System is required to control this System • Available in out-puts ranging from 350mA – 1400mA
TCI DRIVER
DIMMING OPTIONS Understanding the different dimming types is critical to the success of any lighting project. Phase-Cut Dimming (Trailing Edge/Leading Edge) The most basic form of dimming, originally developed for incandescent loads. This is your typical domestic type dimmer. No additional wiring other than standard 2C+E. The dimmer simply “chops” or “cuts” the voltage signal going to the light fitting. Dimmer is simply added to the Active line. • No extra wiring is required. • Standard Trailing Edge/Universal Dimmer can be used. • Available in out-puts ranging from 350mA – 750mA Push DIM Is one of the simplest types of dimming available on the market, and is suitable for use in small to medium sized installations. No low voltage cables or no digital controllers are required - Each downlight requires a standard 2C+E plus a 1 or 2 Core Switch wire, a “normally open” type push button switch is required to operate a Push DIM system. Don’t mix different Push DIM drivers on the same circuit. • Additional 1-2 Core Switch wire is required. • Dimming occurs through the use of a “normally open”
type push button switch • Available in out-puts ranging from 350mA – 1400mA
TCI DRIVER
TCI DRIVER
DIMMING OPTIONS
Understanding the different dimming types is critical to the success of any lighting project.
PHASE-CUT DIMMING (TRAILING EDGE/LEADING EDGE)
The most basic form of dimming, originally developed for incandescent loads. This is your typical domestic type dimmer. No additional wiring other than standard 2C+E. The dimmer simply “chops” or “cuts” the voltage signal going to the light fitting. Dimmer is simply added to the Active line.
Additional 2-Core LV control cable is required.
• Dedicated 1-10V interface or potentiometer is required to control this driver
• Available in out-puts ranging from 350mA – 1400mA
DALI
Digital Addressable Lighting Interface – DALI – is a universal protocol (IEC 62386), designed to allow varying manufacturers products to all work on the same system. So it doesn’t matter whose light fitting you are using, if it is DALI it will work on a DALI controlled system. Up to 64 light fittings can be controlled per DALI line, buildings can have multiple DALI lines. Wiring to a DALI downlight requires a standard 2C+E, plus two DALI control lines (not polarity sensitive).
• Additional 2-Core control cable is required.
• Dedicated DALI interface or Control System is required to control this System
• Available in out-puts ranging from 350mA – 1400mA
DSI
Digital Serial Interface – DSI – is a proprietary protocol of Tridonic. It was largely the precursor to the DALI system. Unlike DALI each fitting is not addressable, so each circuit must be controlled as a whole in the same manner. Again, each downlight requires standard 2C+E plus two DSI control lines (not polarity sensitive).
• Additional 2-Core control cable is required.
• Dedicated Control System is required to control the system
• Available in out-puts ranging from 350mA – 1400mA
SWITCH DIM
Switch DIM is a proprietary term of Tridonic’s, and essentially allows simple dimming through push button control, no low voltage cables or no digital controllers are required - Each downlight requires a standard 2C+E plus a 1 or 2 Core Switch wire, a “normally open” type push button switch is required to operate a Switch DIM system. Don’t mix different Push DIM/Switch DIM drivers on the same circuit.
• Additional 1-2 Core Switch wire is required.
• Dimming occurs through the use of a “normally open” type push button switch
• Available in out-puts ranging from 350mA – 1400mA
DSI Digital Serial Interface – DSI – is a proprietary protocol of Tridonic. It was largely the precursor to the DALI system. Unlike DALI each fitting is not addressable, so each circuit must be controlled as a whole in the same manner. Again, each downlight requires standard 2C+E plus two DSI control lines (not polarity sensitive). • Additional 2-Core control cable is required. • Dedicated Control System is required to
control this System • Available in out-puts ranging from 350mA – 1400mA Switch DIM Switch DIM is a proprietary term of Tridonic’s, and essentially allows simple dimming through push button control, no low voltage cables or no digital controllers are required - Each downlight requires a standard 2C+E plus a 1 or 2 Core Switch wire, a “normally open” type push button switch is required to operate a Switch DIM system. Don’t mix different Push DIM/Switch DIM drivers on the same circuit.
TRIDONIC DRIVER TRIDONIC DRIVER • Additional 1-2 Core Switch wire is required. • Dimming occurs through the use of a “normally open” type push button switch • Available in out-puts ranging from 350mA – 1400mA
TRIDONIC DRIVER
DSI Digital Serial Interface – DSI – is a proprietary protocol of Tridonic. It was largely the precursor to the DALI system. Unlike DALI each fitting is not addressable, so each circuit must be controlled as a whole in the same manner. Again, each downlight requires standard 2C+E plus two DSI control lines (not polarity sensitive). • Additional 2-Core control cable is required. • Dedicated Control System is required to
control this System • Available in out-puts ranging from 350mA – 1400mA Switch DIM Switch DIM is a proprietary term of Tridonic’s, and essentially allows simple dimming through push button control, no low voltage cables or no digital controllers are required - Each downlight requires a standard 2C+E plus a 1 or 2 Core Switch wire, a “normally open” type push button switch is required to operate a Switch DIM system. Don’t mix different Push DIM/Switch DIM drivers on the same circuit.
TRIDONIC DRIVER TRIDONIC DRIVER • Additional 1-2 Core Switch wire is required. • Dimming occurs through the use of a “normally open” type push button switch • Available in out-puts ranging from 350mA – 1400mA
TRIDONIC DRIVER
4544
PUSH DIM
Is one of the simplest types of dimming available on the market, and is suitable for use in small to medium sized installations. No low voltage cables or no digital controllers are required - each downlight requires a standard 2C+E plus a 1 or 2 Core Switch wire, a “normally open” type push button switch is required to operate a Push DIM system. Don’t mix different Push DIM drivers on the same circuit.
• Additional 1-2 Core Switch wire is required.
• Dimming occurs through the use of a “normally open”type push button switch
• Available in out-puts ranging from 350mA – 1400mA
WHAT’S THE DIFFERENCE BETWEEN DELIVERED AND CHIP LUMEN?
When manufacturers quote lumen output for LED fixtures, it is not always easy comparing one against the other. This is because many manufacturers still quote the initial chip or source lumen, whereas other quote the actual delivered lumen.
SO WHAT IS THE DIFFERENCE?
Well basically the initial chip lumen are what comes out of the LED in a raw test state, so not when built into a luminaire. They are a little bit like what lamp lumen are in conventional lamps, such as fluorescent, i.e. what the lamp outputs in a raw state. There is one major difference here though, conventional lamps typically have two major losses applied to them when installed in a light fitting – electrical (i.e. ballast losses) and light output, our luminaire losses (i.e. the light that gets trapped in the luminaire and doesn’t make it out). LED’s have one more major cause of losses – heat. The same LED chip placed on two difference heat sinks will result in two different sets of performance due to better or worse heat dissipation.
Therefore, a better engineered light fitting will typically have much improved performance, even if they both use the exact same LED chip/engine. Delivered lumen are the amount of lumen that make it out of the luminaire after all losses – heat, electrical and luminaire. They should be lumen that show in any luminaire photometric file, and are what we always strive to provide on our data sheets at Pierlite.
One general rule to follow is if a manufacturer doesn’t say if they are delivered lumen, then they probably aren’t. So when next comparing lumen to lumens, try and ensure you are comparing apples with apples (or delivered with delivered)!
DIMMING OPTIONS Understanding the different dimming types is critical to the success of any lighting project. Phase-Cut Dimming (Trailing Edge/Leading Edge) The most basic form of dimming, originally developed for incandescent loads. This is your typical domestic type dimmer. No additional wiring other than standard 2C+E. The dimmer simply “chops” or “cuts” the voltage signal going to the light fitting. Dimmer is simply added to the Active line. • No extra wiring is required. • Standard Trailing Edge/Universal Dimmer can be used. • Available in out-puts ranging from 350mA – 750mA Push DIM Is one of the simplest types of dimming available on the market, and is suitable for use in small to medium sized installations. No low voltage cables or no digital controllers are required - Each downlight requires a standard 2C+E plus a 1 or 2 Core Switch wire, a “normally open” type push button switch is required to operate a Push DIM system. Don’t mix different Push DIM drivers on the same circuit. • Additional 1-2 Core Switch wire is required. • Dimming occurs through the use of a “normally open”
type push button switch • Available in out-puts ranging from 350mA – 1400mA
TCI DRIVER
TCI DRIVER
*
TOP SELLERS NOW AVAILABLE IN ONLY
Pierlite is a registered trademark of Gerard Lighting Pty Ltd ©Copyright Pierlite 2019
www.glg.lighting
Whether you’re supplying for a non-scheduled project, sourcing for last minute replacements or disappointed with missed deliveries, Pierlite’s 1 WEEK EXPRESS* offer is here to support your needs.
n No additional chargesn No add-onsn No minimum order
Contact us at 1300 799 300 or visit www.glg.lighting to find out more.
*Products will be available for dispatch from NSW in 1 week. Does not take into consideration freight. Selected product models only.
BRINGING THE BEST INNOVATIONS TO YOU AT THE SPEED YOU NEED.
4746
The GLG Innovation Centre, located at our head office in Padstow NSW, is a state-of-the-art engineering and laboratory facility built to deliver custom product design and full compliance testing. GLG is one of the few Australian lighting manufacturers that have an in-house testing facility ensuring complete quality control, agile product development and technical aftersales support capabilities.
The GLG Innovation Centre encompasses:
• Photometry• Thermal chambers• Endurance chambers• Testing facilities for electromagnetic
compatibility• IP chamber for both water and dust
TESTING THE LIMITS OF LIGHTI NG IN AUSTRALIA
To visit our innovation centre and our on-site factory, contact your Pierlite sales representation for more information.
Pierlite is a Gerard Lighting Pty Ltd. Gerard Lighting Pty Ltd and all directly related legal entities reserve the right to alter the specifications, designs or other features of any items herein and to discontinue any items at any time without notice and without liability. While every effort is made to ensure that all information in this document is correct at the time of publishing, the document shall not form part of any contract and no warranty of accuracy is given and Gerard Lighting Pty Ltd shall not be liable for any error. TRADEMARKS Any identified trademarks and copyrights are the property of Gerard Lighting Pty Ltd and all directly related legal entities unless otherwise noted. All products within this publication fulfil the requirements of use under relevant trademark limitations. © COPYRIGHT This document is copyright to Gerard Lighting Pty Ltd and all directly related legal entities. Except as permitted under relevant law, no part of this document may be reproduced by any process without written prior permission of and acknowledgment to Gerard Lighting Pty Ltd.
Sep
tem
ber 2
019
www.glg.lighting