Seite 1 von 14

Veröffentlichungen Prof. Dr.-Ing. Ulrich Prahl

[1] Amir H. Motaman, S. u. Prahl, U.: Microstructural constitutive model for polycrystal viscoplasticity in cold and warm regimes based on continuum dislocation dynamics. Journal of the Mechanics and Physics of Solids 122 (2019), S. 205–243

[2] Farivar, H., Deepu, M. J., Hans, M., Phanikumar, G., Bleck, W. u. Prahl, U.: Influence of post-carburizing heat treatment on the core microstructural evolution and the resulting mechanical properties in case-hardened steel components. Materials Science and Engineering: A 744 (2019), S. 778–789

[3] Farivar, H., Prahl, U., Hans, M. u. Bleck, W.: Microstructural adjustment of carburized steel components towards reducing the quenching-induced distortion. Journal of Materials Processing Technology 264 (2019), S. 313–327

[4] Graf, M., Henseler, T., Ullmann, M., Kawalla, R., Prahl, U. u. Awiszus, B.: Study on determination of flow behaviour of 6060-aluminium and AZ31-magnesium thin sheet by means of stacked compression test. IOP Conference Series: Materials Science and Engineering 480 (2019), S. 12023

[5] Hunkel, M., Kagathara, J. u. Prahl, U.: The Influence of Segregations after Forming on the Heat Treatment Result of Bevel Gears. steel research international 9 (2019), S. 1800427

[6] Kittner, K., Ullmann, M., Henseler, T., Kawalla, R. u. Prahl, U.: Microstructure and Hot Deformation Behavior of Twin Roll Cast Mg-2Zn-1Al-0.3Ca Alloy. Materials 12 (2019) 7, S. 1020

[7] Madivala, M., Schwedt, A., Prahl, U. u. Bleck, W.: Strain Hardening, Damage and Fracture Behavior of Al-Added High Mn TWIP Steels. Metals 9 (2019) 3, S. 367

[8] Qiu, Y., Kaden, N., Schmidtchen, M., Prahl, U., Biermann, H. u. Weidner, A.: Laminated TRIP/TWIP Steel Composites Produced by Roll Bonding. Metals 9 (2019) 2, S. 195

[9] Sheng, Z., Altenbach, C., Prahl, U., Zander, D. u. Bleck, W.: Effect of cutting method on hydrogen embrittlement of high-Mn TWIP steel. Materials Science and Engineering: A 744 (2019), S. 10–20

[10] Ullmann, M., Kittner, K., Henseler, T., Stöcker, A., Prahl, U. u. Kawalla, R.: Development of new alloy systems and innovative processing technologies for the production of magnesium flat products with excellent property profile. Procedia Manufacturing 27 (2019), S. 203–208

[11] Motaman, A. H., Schacht, K., Haase, C. u. Prahl, U.: Thermo-micro-mechanical simulation of bulk metal forming processes. 2018. https://arxiv.org/pdf/1810.11670

[12] Darvishi Kamachali, R., Schwarze, C., Lin, M., Diehl, M., Shanthraj, P., Prahl, U., Steinbach, I. u. Raabe, D.: Numerical Benchmark of Phase-Field Simulations with Elastic Strains: Precipitation in the Presence of Chemo-Mechanical Coupling. Computational Materials Science 155 (2018), S. 541–553

[13] Farivar, H., Richter, S., Hans, M., Schwedt, A., Prahl, U. u. Bleck, W.: Experimental quantification of carbon gradients in martensite and its multi-scale effects in a DP steel. Materials Science and Engineering: A 718 (2018), S. 250–259

[14] Habibi, N., Ramazani, A., Sundararaghavan, V. u. Prahl, U.: Failure predictions of DP600 steel sheets using various uncoupled fracture criteria. Engineering Fracture Mechanics 190 (2018), S. 367–381

[15] Habibi, N., Sundararaghavan, V., Prahl, U. u. Ramazani, A.: Experimental and Numerical Investigations into the Failure Mechanisms of TRIP700 Steel Sheets. Metals 8 (2018) 12, S. 1073

[16] Hunkel, M., Kagathara, J., Schacht, K., Motaman, A. H. u. Prahl, U.: Integrierte Umform- und Wärmebehandlungssimulation für Massivumformteile. Massivumformung (2018) 09, S. 54–59

[17] Kawalla, R., Stöcker, A., Prahl, U., Wei, X., Dierdorf, J., Hirt, G., Heller, M., Roggenbuck, S., Korte-Kerzel, S., Alois Weiss, H., Tröber, P., Böhm, L., Volk, W., Leuning, N. u. Hameyer, K.: Low-loss FeSi sheet for energy-efficient electrical drives. AIMS Materials Science 5 (2018) 6, S. 1184–1198

[18] Kawalla, R., Ullmann, M., Henseler, T. u. Prahl, U.: Magnesium Twin-Roll Casting Technology for Flat and Long Products - State of the Art and Future. Materials Science Forum 941 (2018), S. 1431–1436

[19] Li, X., Ramazani, A., Prahl, U. u. Bleck, W.: Quantification of complex-phase steel microstructure by using combined EBSD and EPMA measurements. Materials Characterization 142 (2018), S. 179–186

Seite 2 von 14

[20] Madivala, M., Schwedt, A., Prahl, U. u. Bleck, W.: Anisotropy and strain rate effects on the failure behavior of TWIP steel: A multiscale experimental study. International Journal of Plasticity (2018)

[21] Madivala, M., Schwedt, A., Wong, S. L., Roters, F., Prahl, U. u. Bleck, W.: Temperature dependent strain hardening and fracture behavior of TWIP steel. International Journal of Plasticity 104 (2018), S. 80–103

[22] Moses, M., Luft, J., Ullmann, M., Prahl, U. u. Kawalla, R.: Impact of Initial State during Calibre Rolling: Investigating Microstructure and Mechanical Properties of AZ80 Magnesium Alloy. Materials Science Forum 941 (2018), S. 857–862

[23] Motaman, A. H., Komerla, K., Storms, T., Prahl, U., Brecher, C. u. Bleck, W.: Experimental and numerical investigation of dual phase steels formability during laser-assisted hole-flanging. AIP Conference Proceedings. Author(s) 2018, S. 60005

[24] Nam, A., Turdimatov, M., Kawalla, R. u. Prahl, U.: Inter-Pass Softening Behavior of Fe-16Cr- x Mn-4Ni-0.05C-0.17N Steel. Advanced Engineering Materials 39 (2018), S. 1371

[25] Nam, A., Turdimatov, M., Kawalla, R. u. Prahl, U.: The Kinetics of Dynamic Recrystallization of Fe-16Cr-xMn-4Ni-0.05C-0.17N Steel. steel research international 40 (2018), S. 606

[26] Qayyum, F., Guk, S., Kawalla, R. u. Prahl, U.: Experimental Investigations and Multiscale Modeling to Study the Effect of Sulfur Content on Formability of 16MnCr5 Alloy Steel. steel research international 254 (2018), S. 282

[27] Rautenstrauch, A., Luft, J., Birnbaum, P., Baumann, M., Ullmann, M., Kräusel, V., Landgrebe, D., Kawalla, R. u. Prahl, U.: Improving the formability of magnesium by cushion-ram-pulsation. MATEC Web of Conferences 190 (2018), S. 12003

[28] Santillana, B., Paruchuri, V., Kripak, V., Prahl, U. u. Horn, C. ten: Assessment of Shell Strength During Solidification in the Mold Cracking Simulator (MCS) Test. Metallurgical and Materials Transactions A (2018)

[29] Song, W., Prahl, U., Ma, Y. u. Bleck, W.: Multiphase-Field Simulation of Cementite Precipitation during Isothermal Lower Bainitic Transformation. steel research international 21 (2018), S. 1800028

[30] Springer, P. u. Prahl, U.: Pinning effect of strain induced Nb(C,N) on case hardening steel under warm forging conditions. Journal of Materials Processing Technology 253 (2018), S. 121–133

[31] Wemme, H., Moses, M., Oswald, M., Ullmann, M., Kawalla, R. u. Prahl, U.: Anwendung des innovativen Gießwalzver-fahrens zur wirtschaftlichen Herstellung von Magnesium-Langprodukten. Tagungsband 10. Ranshofener Leichtmetalltage (2018)

[32] Wemme, H., Moses, M., Oswald, M., Ullmann, M., Kawalla, R. u. Prahl, U.: Anwendung des innovativen Gießwalzver-fahrens zur wirtschaftlichen Herstellung von Magnesium-Langprodukten. Tagungsband 10. Ranshofener Leichtmetalltage (2018)

[33] Abouridouane, M., Laschet, G., Kripak, V., Texeira, A., Dierdorf, J., Prahl, U. u. Klocke, F.: Cutting Simulations of Two Gear Steels with Microstructure Dependent Material Laws. Procedia CIRP 58 (2017)

[34] Bleck, W., Brecher, C., Herty, M., Hirt, G., Hopmann, C., Klocke, F., Borchmann, N., Dierdorf, J., Farivar, H., Fayek, P., Häck, A., Kripak, V., Krömer, M., Laschet, G., Prahl, U., Rüngeler, M., Schmitz, G. J., Spekowius, M., Springer, P. u. Teixeira, A. M.: Integrated computational materials and production engineering (ICMPE). Integrative Production Technology: Theory and Applications (2017)

[35] Brecher, C., Bleck, W., Feldhusen, J., Hirt, G., Klocke, F., Reisgen, U., Schmitt, R., Bailly, D., Bambach, M., Conrads, L., Du Bois-Reymond, F., Göttmann, A., Gräfe, S., Harraz, M., Heller, J. E., Herfs, W., Komerla, K. C., Laugwitz, M., Löwer, M., Mertin, C., Naumov, A., Nittinger, J., Peterek, M., Prahl, U., Rey, J., Schiebahn, A., Schmid, A., Schmitz, R., Tönissen, S., Voswinckel, H., Wegener, M. u. Wellmann, F.: Multi-technology platforms (MTPs). Integrative Production Technology: Theory and Applications (2017)

[36] Deepu, M. J., Farivar, H., Prahl, U. u. Phanikumar, G.: Microstructure based simulations for prediction of flow curves and selection of process parameters for inter-critical annealing in DP steel. IOP Conference Series: Materials Science and Engineering 192 (2017) 1

[37] Farivar, H., Rothenbucher, G., Prahl, U. u. Bernhardt, R.: ICME-Based Process and Alloy Design for Vacuum Carburized Steel Components with High Potential of Reduced Distortion. Proceedings of the 4th World Congress on Integrated Computational Materials Engineering (ICME 2017). Springer 2017, S. 133–144

[38] Haase, C., Bültmann, J., Hof, J., Ziegler, S., Bremen, S., Hinke, C., Schwedt, A., Prahl, U. u. Bleck, W.: Exploiting process-related advantages of selective laser melting for the production of high-manganese steel. Materials 10 (2017) 1

Seite 3 von 14

[39] Hüter, C., Neugebauer, J., Boussinot, G., Svendsen, B., Prahl, U. u. Spatschek, R.: Modelling of grain boundary dynamics using amplitude equations. Continuum Mechanics and Thermodynamics 29 (2017) 4, S. 895–911

[40] Jeschke, S., Bleck, W., Richert, A., Schuh, G., Schulz, W., Ziefle, M., Bräkling, A., Calero Valdez, A., Dahmen, K., Jansen, U., Jooß, C., Müller, S. L., Prahl, U., Schaar, A. K., Sharma, M. u. Thiele, T.: Scientific cooperation engineering. Integrative Production Technology: Theory and Applications (2017)

[41] John, D. M., Farivar, H., Rothenbucher, G., Kumar, R., Zagade, P., Khan, D., Babu, A., Gautham, B. P., Bernhardt, R., Phanikumar, G. u. Prahl, U.: An Attempt to integrate Software Tools at Microscale and above towards an ICME Approach for Heat Treatment of a DP Steel Gear with Reduced Distortion. Proceedings of the 4th World Congress on Integrated Computational Materials Engineering (ICME 2017). Springer 2017, S. 3–13

[42] Komerla, K., Naumov, A., Mertin, C., Prahl, U. u. Bleck, W.: Investigation of microstructure and mechanical properties of friction stir welded AA6016-T4 and DC04 alloy joints. International Journal of Advanced Manufacturing Technology (2017), S. 1–11

[43] Poprawe, R., Bleck, W., Piller, F. T., Schuh, G., Barg, S., Bohl, A., Bremen, S., Bültmann, J., Hinke, C., Jiang, R., Kleer, R., Merkt, S., Prahl, U., Riesener, M., Schrage, J., Weller, C. u. Ziegler, S.: Direct, mold-less production systems. Integrative Production Technology: Theory and Applications (2017)

[44] Prahl, U., Lin, M., Weikamp, M., Hueter, C., Schicchi, D., Hunkel, M. u. Spatschek, R.: Multiscale, Coupled Chemo-mechanical Modeling of Bainitic Transformation during Press Hardening. Proceedings of the 4th World Congress on Integrated Computational Materials Engineering (ICME 2017). Springer 2017, S. 335–343

[45] Ramazani, A., Serafeim, A. u. Prahl, U.: Towards a micromechanical based description for strength increase in dual phase steels during bake-hardening process. Materials Science and Engineering A 702 (2017), S. 386–397

[46] Schacht, K., Motaman, A. H., Prahl, U. u. Bleck, W.: A unified dislocation density-dependent physical-based constitutive model for cold metal forming. AIP Conference Proceedings 1896 (2017)

[47] Schmitz, G. J., Farivar, H. u. Prahl, U.: Scenario for Data Exchange at the Microstructure Scale. Integrating Materials and Manufacturing Innovation 6 (2017) 1, S. 127–133

[48] Sharma, M., Dahmen, K., Prahl, U. u. Bleck, W.: Productivity in Science, and Team Diversity: An expolratory study. In: Jain, P. K., Lamirel, J.-C. u. Babbar, P. (Hrsg.): Trends in bibliometrics and scientometrics studies. London, London: Athena Academic 2017, S. 27–41

[49] Sharma, M., Richter, S., Prahl, U. u. Bleck, W.: Characterization of Nb-Microsegregation and Eutectic Carbide in As-Cast Nb-Microalloyed Al-Free Case Hardening Steel. Steel Research International 88 (2017) 10

[50] Suwanpinij, P., Li, X., Prahl, U. u. Bleck, W.: Modeling Bainite Transformation and Retained Austenite in Hot Rolled TRIP Steel by Instantaneous Carbon Enrichment. Steel Research International 88 (2017) 12

[51] Weikamp, M., Hüter, C., Lin, M., Prahl, U., Schicchi, D., Hunkel, M. u. Spatschek, R.: Scale bridging simulations of large elastic deformations and bainitic transformations. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics) 10164 LNCS (2017), S. 125–138

[52] Konter, A.W.A., Farivar, H., Post, J. u. Prahl, U.: Industrial Needs for ICME. JOM 68 (2016) 1, S. 59–69

[53] Lin, M. u. Prahl, U.: A parallelized model for coupled phase field and crystal plasticity simulation. Computer Methods in Materials Science 16 (2016) 3, S. 156–162

[54] Ramazani, A., Abbasi, M., Kazemiabnavi, S., Schmauder, S., Larson, R. u. Prahl, U.: Development and application of a microstructure-based approach to characterize and model failure initiation in DP steels using XFEM. Materials Science and Engineering A 660 (2016), S. 181–194

[55] Ramazani, A., Bruehl, S., Abbasi, M., Bleck, W. u. Prahl, U.: The Effect of Bake-Hardening Parameters on the Mechanical Properties of Dual-Phase Steels. Steel Research International 87 (2016) 11, S. 1559–1565

[56] Ramazani, A., Quade, H., Abbasi, M. u. Prahl, U.: The effect of martensite banding on the mechanical properties and formability of TRIP steels. Materials Science and Engineering A 651 (2016), S. 160–164

Seite 4 von 14

[57] Schacht, K., Prahl, U. u. Bleck, W.: Material models and their capability for process and material properties design in different forming processes. Materials Science Forum 854 (2016), S. 174–182

[58] Schmitz, G. J., Engstrom, A., Bernhardt, R., Prahl, U., Adam, L., Seyfarth, J., Apel, M., Agelet de Saracibar, C., Korzhavyi, P., Agren, J. u. Patzak, B.: Software Solutions for ICME. JOM 68 (2016) 1, S. 70–76

[59] Schmitz, G. J. u. Prahl, U.: Handbook of software solutions for ICME. John Wiley & Sons 2016 [60] Springer, P. u. Prahl, U.: Characterisation of mechanical behavior of 18CrNiMo7-6 steel with and

without nb under warm forging conditions through processing maps analysis. Journal of Materials Processing Technology 237 (2016), S. 216–234

[61] Suwanpinij, P., Li, X., Prahl, U. u. Bleck, W.: Modelling and characterisation of bainite and retained austenite in hot rolled trip steel. METAL 2016 - 25th Anniversary International Conference on Metallurgy and Materials, Conference Proceedings (2016)

[62] Weikamp, M., Hüter, C., Lin, M., Prahl, U., Schicchi, D., Hunkel, M. u. Spatschek, R.: Scale Bridging Simulations of Large Elastic Deformations and Bainitic Transformations. Jülich Aachen Research Alliance (JARA) High-Performance Computing Symposium (2016), S. 125–138

[63] Wong, S. L., Madivala, M., Prahl, U., Roters, F. u. Raabe, D.: A crystal plasticity model for twinning- and transformation-induced plasticity. Acta Materialia 118 (2016), S. 140–151

[64] Bleck, W., Prahl, U., Hirt, G. u. Bambach, M.: Designing New Forging Steels by ICMPE, Advances in Production Technology. Springer International Publishing (2015), S. 85–98

[65] Bültmann, J., Merkt, S., Hammer, C., Hinke, C. u. Prahl, U.: Scalability of the mechanical properties of selective laser melting produced micro-struts. Journal of Laser Applications 27 (2015) S2

[66] Hirt, G., Bambach, M., Bleck, W., Prahl, U. u. Schulz, W.: Virtual Production Systems. Advances in Production Technology. In: Brecher, C. (Hrsg.): Lecture Notes in Production Engineering. Springer 2015, S. 67–68

[67] Hirt, G., Bambach, M., Bleck, W., Prahl, U. u. Stollenwerk, J.: The Development of Incremental Sheet Forming from Flexible Forming to Fully Integrated Production of Sheet Metal Parts. Advances in Production Technolog (2015), S. 117–129

[68] Hüter, C., Lin, M., Schicchi, D., Hunkel, M., Prahl, U. u. Spatschek, R.: A multiscale perspective on the kinetics of solid state transformations with application to bainite formation. AIMS Materials Science 2 (2015) 4, S. 319–345

[69] Hüter, C., Neugebauer, J., Boussinot, G., Svendsen, B., Prahl, U. u. Spatschek, R.: Modelling of grain boundary dynamics using amplitude equations. Continuum Mechanics and Thermodynamics (2015)

[70] Konovalov, S. u. Prahl, U.: Tailoring the microstructure for microalloyed carburizing steels by an ICME approach. Fundamentals and Applications of Mo and Nb Alloying in High Performance Steels – Volume 2. Proceedings of the 2nd International Symposium. H. Mohrbacher 2015, S. 215–225

[71] Konter, A.W.A., Farivar, H., Post, J. u. Prahl, U.: Industrial Needs for ICME. JOM (2015), S. 1–11 [72] Kripak, V., Otten, C., Olschok, S., Spirgatis, T., Reisgen, U., Bleck, W. u. Prahl, U.: Herstellung

massiver metallischer Gläser aus kristallinen Gefügen durch lokales kleinvolumiges Umschmelzen. Materialwissenschaft und Werkstofftechnik 46 (2015) 6, S. 613–620

[73] Kripak, V., Otten, C., Olschok, S., Spirgatis, T., Reisgen, U., Bleck, W. u. Prahl, U.: Production of bulk metallic glasses of crystalline structures by local small-volume re-melting [Herstellung massiver metallischer Gläser aus kristallinen Gefügen durch lokales kleinvolumiges Umschmelzen]. Materialwissenschaft und Werkstofftechnik 46 (2015) 6, S. 613–620

[74] Madivala, M., Segel, C., Weidner, A., Biermann, H., Bleck, W. u. Prahl, U.: Multiscale Modelling of Damage and Fracture in High Mn TWIP Steels. 12th International Conference on the Mechanical Behavior of Materials. 2015, S. 233

[75] Ramazani, A., Mukherjee, K., Abdurakhmanov, A., Abbasi, M. u. Prahl, U.: Characterization of microstructure and mechanical properties of resistance spot welded DP600 steel. Metals 5 (2015) 3, S. 1704–1716

[76] Schacht, K., Prahl, U., Bleck, W., Twickler, M., Settefrati, A., Heizmann, J. u. Steinhof, J.: Mikrostrukturbasierte Modelle ermöglichen genauere Simulationsergebnisse bei mehrstufigen Schmiedeprozessen. Schmiede-Journal (2015), S. 30–36

[77] Schmitz, G. J., Engstrom, A., Bernhardt, R., Prahl, U., Adam, L., Seyfarth, J., Apel, M., Saracibar, C. A. de, Korzhavyi, P., Agren, J. u. Patzak, B.: Software Solutions for ICME. JOM (2015), S. 1–7

Seite 5 von 14

[78] Song, W., Bleck, W. u. Prahl, U.: ICME towards improved understanding of bainite in 100Cr6. Proceedings of the 3rd World Congress on Integrated Computational Materials Engineering, ICME 2015 (2015)

[79] Song, W., Prahl, U. u. Bleck, W.: Steel-Ab initio. Quantum mechanics guided design of new Fe-based materials. Proceedings of the 3rd World Congress on Integrated Computational Materials Engineering, ICME 2015 (2015)

[80] Bleck, W., Hömberg, D., Prahl, U., Suwanpinij, P. u. Togobytska, N.: Optimal control of a cooling line for production of hot rolled dual phase steel. Steel Research International 85 (2014) 9, S. 1328–1333

[81] Bleck, W., Prahl, U. u. Suwanpinij, P.: Microstructure Development in Hot-Rolled Advanced High Strength Steels. Steel in Competition, 29th Aachener Stahlkolloquium ‐ Materials Science (2014), S. 25–40

[82] Casellas, D., Madivala, M., Lara, A., Calvo, J., Cabrera, J. M. u. Prahl, U. (Hrsg.): Fracture and crack propagation resistance of High Manganese TWIP Steels. Experimental evaluation. Aachen 2014

[83] Hüter, C., Neugebauer, J., Boussinot, G., Svendsen, B., Prahl, U. u. Spatschek, R.: Modeling of grain boundary dynamics using amplitude equations. arXiv preprint arXiv: 1407.4283 (2014)

[84] Jooß, C., Welter, F., Leisten, I., Richert, A., Schaar, A. K., Calero Valdez, A., Nick, E.-M., Prahl, U., Jansen, U., Schulz, W., Ziefle, M. u. Jeschke, S.: Scientific Cooperation Engineering in the Cluster of Excellence Integrative Production Technology for High-Wage Countries at RWTH Aachen University. Automation, Communication and Cybernetics in Science and Engineering 2013/2014 (2014), S. 103–109

[85] Kang, J., Ingendahl, T., Prahl, U. u. Bleck, W. (Hrsg.): Temperature and Composition Dependence of Localised Deformation in High Mn Steels. Aachen 2014

[86] Konovalov, S., Sharma, M. u. Prahl, U. (Hrsg.): Nb microsegregation and redistribution during casting and forging in Al-free case hardening steel. Mailand 2014

[87] Laschet, G., Shukla, M., Henke, T., Fayek, P., Bambach, M. u. Prahl, U.: Impact of the microstructure on the U-O forming simulations of a ferrite-pearlite pipeline tube. Steel Research International 85 (2014) 6, S. 1083–1098

[88] Madivala, M., Schwich, H., Schwedt, A., Bleck, W. u. Prahl, U. (Hrsg.): Influence of recrystallization on the microstructure and mechanical properties of High Manganese TWIP / TRIP steels. Aachen 2014

[89] Mukherjee, M., Prahl, U. u. Bleck, W.: Modelling the strain-induced precipitation kinetics of vanadium carbonitride during hot working of precipitation-hardened Ferritic-Pearlitic steels. Acta Materialia 71 (2014), S. 234–254

[90] Prahl, U., Suwanpinij, P., Togobytska, N., Hömberg, D. u. Bleck, W.: Simulation, optimization and control of microstructure evolution during hot rolling of multiphase steels. OMD 2014 – The Fundamental Problems, Innovative Materials and Technologies. Proceedings of the International Science and Technology Congress. Moskau 2014, S. 157–162

[91] Ramazani, A., Bruehl, S., Gerber, T., Bleck, W. u. Prahl, U.: Quantification of bake hardening effect in DP600 and TRIP700 steels. Materials and Design 57 (2014), S. 479–486

[92] Ramazani, A., Chang, Y. u. Prahl, U.: Characterization and modeling of failure initiation in bainite-aided DP steel. Advanced Engineering Materials 16 (2014) 11, S. 1370–1380

[93] Ramazani, A., Ebrahimi, Z. u. Prahl, U.: Study the effect of martensite banding on the failure initiation in dual-phase steel. Computational Materials Science 87 (2014), S. 241–247

[94] Ramazani, A., Mukherjee, K., Abdurakhmanov, A., Prahl, U., Schleser, M., Reisgen, U. u. Bleck, W.: Micro-macro-characterisation and modelling of mechanical properties of gas metal arc welded(GMAW)DP600 steel. Materials Science and Engineering A 589 (2014), S. 1–14

[95] Ramazani, A., Schwedt, A., Aretz, A. u. Prahl, U.: Failure initiation in dual-phase steel. Key Engineering Materials 586 (2014), S. 67–71

[96] Schacht, K., Heizmann, J., Sharma, M., Bleck, W. u. Prahl, U.: Influence of thermal process control on microstructure and properties of Nb alloyed PH-steels. AutoMetForm/SFU 2014, New Materials for Vehicle Components, Conference Proceedings. Freiberg 2014, S. 205–213

[97] Schacht, K., Simushkin, A., Prahl, U. u. Bleck, W.: Influence of Model Parameters on the Flow Stress Prediction using Rate Laws for Dislocation Density and Dynamic Recrystallization. Warm and Hot Forming, 7th Forming Technology Forum Proceedings. Enschede 2014, S. 113–120

Seite 6 von 14

[98] Schmitz, G. J. u. Prahl, U.: ICMEg – the Integrated Computational Materials Engineering expert group – a new European coordination action. Integrating Materials and Manufacturing Innovation 3 (2014) 2

[99] Song, W., Choi, P.-P., Inden, G., Prahl, U., Raabe, D. u. Bleck, W.: On the spheroidized carbide dissolution and elemental partitioning in high carbon bearing steel 100Cr6. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 45 (2014) 2, S. 595–606

[100] Song, W., Huang, H., Prahl, U. u. Bleck, W. (Hrsg.): Prediction of strain hardening behavior in high manganese steels by deformation mechanism maps. Aachen 2014

[101] Bambach, M., Schmitz, G. J. u. Prahl, U.: ICME – a mere coupling of models or a discipline of its own? Proceedings of the 2nd World Congress on Integrated Computational Materials Engineering (ICME). Salt Lake City: Wiley 2013, S. 285–290

[102] Bernhardt, R., Schafstall, H., Prahl, U., Konovalov, S., Bambach, M. u. Henke, T.: Physikalisch-statistisch basierte Multiskalen-Simulation in Prozessketten der Massivumformung. Proceedings of New Developments in Forging Technology: Lightweight design – not just a question of material. Mathias Liewald 2013, S. 81–98

[103] Bleck, W., Hömberg, D., Prahl, U., Suwanpinij, P. u. Togobytska, N.: Optimal control of a cooling line for production of hot rolled dual phase steel. Reprint Nr. 1794 (2013)

[104] Bleck, W., Prahl, U. u. Suwanpinij, P. (Hrsg.): Microstructure development in hot-rolled advanced high strength steels. 2013

[105] Erisir, E., Prahl, U. u. Bleck, W.: Hot deformation behavior and microstructural evolution of a nickel-free austenitic steel with high nitrogen content. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 44 (2013) 12, S. 5549–5555

[106] Fayek, P., Petermann, T. u. Prahl, U.: Towards an Integrative Simulation of Microstructural Response to Case Hardening of Microalloyed Steels. Proceedings of the 2nd World Congress on Integrated Computational Materials Engineering (ICME). Salt Lake City: Wiley 2013, S. 163–168

[107] Laschet, G., Fayek, P., Henke, T., Quade, H. u. Prahl, U.: Derivation of anisotropic flow curves of ferrite-pearlite pipeline steel via a two-level homogenisation scheme. Materials Science and Engineering A 566 (2013), S. 143–156

[108] Laschet, G., Henke, T., Shukla, M., Fayek, P., Prahl, U. u. Bambach, M. (Hrsg.): Multiscale U-O forming simulation of a ferrite/pearlite pipeline tube with effective anisotropic flow curves. Herrsching 2013

[109] Pinard, P. T., Schwedt, A., Ramazani, A., Prahl, U. u. Richter, S.: Characterization of dual-phase steel microstructure by combined submicrometer EBSD and EPMA carbon measurements. Microscopy and Microanalysis 19 (2013) 4, S. 996–1006

[110] Prahl, U., Bleck, W. u. Saeed-Akbari, A.: STEEL – AB INITIO. Quantum mechanics guided design of new Fe-based materials. Proceedings of the 2nd World Congress on Integrated Computational Materials Engineering (ICME). Salt Lake City: Wiley 2013, S. 37–42

[111] Prahl, U., Quade, H., Ramazani, A. u. Bleck, W.: Influence of microstructural banding on flow curve and failure in TRIP steels. MEFORM 2013 – Simulation von Umformprozessen, Tagungsband. Freiberg 2013, S. 89–98

[112] Ramazani, A., Berme, B. u. Prahl, U.: Steel and Iron Based Alloys. Structural Materials and Processes in Transportation (2013)

[113] Ramazani, A., Li, Y., Mukherjee, K., Prahl, U., Bleck, W., Abdurakhmanov, A., Schleser, M. u. Reisgen, U.: Microstructure evolution simulation in hot rolled DP600 steel during gas metal arc welding. Computational Materials Science 68 (2013), S. 107–116

[114] Ramazani, A., Mukherjee, K., Quade, H., Prahl, U. u. Bleck, W.: Correlation between 2D and 3D flow curve modelling of DP steels using a microstructure-based RVE approach. Materials Science and Engineering A 560 (2013), S. 129–139

[115] Ramazani, A., Mukherjee, K., Schwedt, A., Goravanchi, P., Prahl, U. u. Bleck, W.: Quantification of the effect of transformation-induced geometrically necessary dislocations on the flow-curve modelling of dual-phase steels. International Journal of Plasticity 43 (2013), S. 128–152

[116] Ramazani, A., Pinard, P. T., Richter, S., Schwedt, A. u. Prahl, U.: Characterisation of microstructure and modelling of flow behaviour of bainite-aided dual-phase steel. Computational Materials Science 80 (2013), S. 134–141

[117] Ramazani, A. u. Prahl, U.: Modelling the Process Chain of Cold Rolled Dual Phase Steel for Automotive Application. Proceedings of the 2nd World Congress on Integrated Computational Materials Engineering (ICME). Salt Lake City: Wiley 2013, S. 97–102

Seite 7 von 14

[118] Ramazani, A., Schwedt, A., Aretz, A., Prahl, U. u. Bleck, W.: Characterization and modelling of failure initiation in DP steel. Computational Materials Science 75 (2013), S. 35–44

[119] Salari, S., Naderi, M., Prahl, U. u. Bleck, W.: Quantification of phase transformation kinetics under thermomechanical conditions using dilatometry data. Advanced Materials Research 622 (2013), S. 581–584

[120] Schacht, K., Hermann, K. u. Prahl, U.: Einfluss des Stempelkonzeptes auf die Aufnahme von Warmfließkurven im Umformdilatometer und deren physikalische Interpretation. Fortschritte in der Werkstoffprüfung für Forschung und Praxis (2013), S. 259–264

[121] Suwanpinij, P., Prahl, U. u. Bleck, W.: Simulation, optimization and control of microstructure evolution and mechanical properties during hot rolling of multiphase steels. MEFORM 2013 – Simulation von Umformprozessen, Tagungsband. Freiberg 2013, S. 267–277

[122] Abbasi, M., Ketabchi, M., Labudde, T., Prahl, U. u. Bleck, W.: New attempt to wrinkling behavior analysis of tailor welded blanks during the deep drawing process. Materials and Design 40 (2012), S. 407–414

[123] Abbasi, M., Ketabchi, M., Ramazani, A. u. Prahl, U.: Investigation into the effects of weld zone and geometric discontinuity on the formability reduction of tailor welded blanks. Computational Materials Science 59 (2012), S. 158–164

[124] Beer, T., Meisen, T. u. Prahl, U.: Visualization. In: Schmitz, G. J. u. Prahl, U. (Hrsg.): Integrative computational materials engineering: concepts and applications of a modular simulation platform. Wiley 2012, S. 131–142

[125] Beer, T., Meisen, T., Reinhard, R. u. Prahl, U.: Distributed Simulations. In: Schmitz, G. J. u. Prahl, U. (Hrsg.): Integrative computational materials engineering: concepts and applications of a modular simulation platform. Wiley 2012, S. 117–130

[126] Bleck, W., Hirt, G., Loosen, P., Poprawe, R., Reisgen, U., Bambach, M., Bergweiler, G., Bültmann, J., Diettrich, J., Göttmann, A., Prahl, U., Saeed-Akbari, A., Stein, L., Steiners, M., Stollenwerk, J. u. Taleb-Araghi, B.: Improving the Efficiency of Incremental Sheet Metal Forming. In: Brecher, C. (Hrsg.): Integrative production technology for high-wage countries. Springer 2012, S. 551–590

[127] Fayek, P., Quade, H., Henke, T., Laschet, G., Apel, M., Rossiter, E. S., Bambach, M. u. Prahl, U.: Test Case Line Pipe. Integrative Computational Materials Engineering: Concepts and Applications of a Modular Simulation Platform (2012)

[128] Hirt, G., Bleck, W., Bobzin, K., Brecher, C., Bührig-Polazcek, A., Haberstroh, E., Klocke, F., Loosen, P., Michaeli, W., Poprawe, R., Reisgen, U., Arntz, K., Bagcivan, N., Bambach, M., Bäumler, S., Beckemper, S., Bergweiler, G., Breitbach, T., Buchholz, S., Bültmann, J., Diettrich, J., Do-Khac, D., Eilbracht, S., Emonts, M., Flock, D., Gerhardt, K., Gillner, A., Göttmann, A., Grönlund, O., Hartmann, C., Heinen, D., Herfs, W., Hermani, J.-P., Holtkamp, J., Ivanov, T., Jakob, M., Janssen, A., Karlberger, A., Klaiber, F., Kutschmann, P., Neuß, A., Prahl, U., Roderburg, A., Rosen, C.-J., Rösner, A., Saeed-Akbari, A., Scharf, M., Scheik, S., Schleser, M., Schöngart, M., Stein, L., Steiners, M., Stollenwerk, J., Taleb Araghi, B., Theiß, S. u. Wunderle, J.: 5. Hybrid Production Systems. In: Brecher, C. (Hrsg.): Integrative production technology for high-wage countries. Springer 2012, S. 435–696

[129] Jooß, C., Welter, F., Leisten, I., Richert, A., Schaar, A. K., Calero Valdez, A., Nick, E.-M., Prahl, U., Jansen, U., Schulz, W., Ziefle, M. u. Jeschke, S. (Hrsg.): Scientific Cooperation Engineering in the Cluster of Excellence Integrative Production Technology for High-Wage Countries at RWTH Aachen University. Madrid: L. Gómez Chova, A. López Martínez, I. Candel Torres. International Association of Technology, Education and Development 2012

[130] Konovalov, S., Henke, T., Jansen, U., Hardjosuwito, A., Lohse, W., Bambach, M. u. Prahl, U.: Test Case Gearing Component. Integrative Computational Materials Engineering: Concepts and Applications of a Modular Simulation Platform (2012)

[131] Konovalov, S., Prahl, U., Kohlmann, R. u. Bleck, W.: Development of Al-reduced case hardening steel for high temperature carburizing [Entwicklung eines Al-reduzierten Einsatzstahls für die Hochtemperatur-Aufkohlung]. HTM - Haerterei-Technische Mitteilungen 67 (2012) 3, S. 202–209

[132] Prahl, U.: Numerical Methods in Steel Design. MEFORM 2012 – Werkstofftechnologie und Massivumformung, Tagungsband. 2012, S. 304–314

[133] Prahl, U., Ramazani, A., Quade, H. u. Twardowski, R. (Hrsg.): Damage modeling of multiphase steels using microstructure based RVE technique. 2012

[134] Prahl, U. u. Schmitz, G. J.: Future ICME. Integrative Computational Materials Engineering: Concepts and Applications of a Modular Simulation Platform (2012)

Seite 8 von 14

[135] Quade, H., Steffen, A., Gavendová, P., Prahl, U., Tolan, M. u. Bleck, W.: Experimental techniques for the microstructural characterization of retained austenite stability and single phase properties in low-alloyed trip-steels. Chemicke Listy 106 (2012) SUPPL. 3, s515-s518

[136] Ramazani, A., Abbasi, M., Prahl, U. u. Bleck, W.: Failure analysis of DP600 steel during the cross-die test. Computational Materials Science 64 (2012), S. 101–105

[137] Ramazani, A., Mukherjee, K., Prahl, U. u. Bleck, W.: Modelling the effect of microstructural banding on the flow curve behaviour of dual-phase (DP) steels. Computational Materials Science 52 (2012) 1, S. 46–54

[138] Ramazani, A., Mukherjee, K., Prahl, U. u. Bleck, W.: Transformation-induced, geometrically necessary, dislocation-based flow curve modeling of dual-phase steels. Effect of grain size. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 43 (2012) 10, S. 3850–3869

[139] Schmitz, G. J., Benke, S., Laschet, G., Apel, M., Rosenbaum, J., Prahl, U., Fayek, P., Konovalov, S., Quade, H., Freyberger, S., Henke, T., Bambach, M., Arping, T., Baranowski, T., Heesel, B., Eppelt, U., Jansen, U., Rossiter, E., Kuckhoff, B., Gries, T., Linke, M., Kashko, T., Bobzin, K. u. Bagcivan, N.: Integrative Process Chain Simulation for Material and Production Technologies. In: Brecher, C. (Hrsg.): Integrative production technology for high-wage countries. Springer 2012, S. 319–373

[140] Schmitz, G. J. u. Prahl, U.: Basic Concept of the Platform. Integrative Computational Materials Engineering: Concepts and Applications of a Modular Simulation Platform (2012)

[141] Schmitz, G. J. u. Prahl, U.: Integrative Computational Materials Engineering. Concepts and Applications of a Modular Simulation Platform. Integrative Computational Materials Engineering: Concepts and Applications of a Modular Simulation Platform (2012)

[142] Schmitz, G. J. u. Prahl, U. (Hrsg.): Integrative computational materials engineering: concepts and applications of a modular simulation platform. Wiley 2012

[143] Schmitz, G. J. u. Prahl, U.: Introduction. Integrative Computational Materials Engineering: Concepts and Applications of a Modular Simulation Platform (2012)

[144] Schmitz, G. J. u. Prahl, U. (Hrsg.): Integrative computational materials engineering: concepts and applications of a modular simulation platform. Wiley 2012

[145] Schulz, W., Bischof, C., Bobzin, K., Brecher, C., Gries, T., Jeschke, S., Kampker, A., Klocke, F., Kuhlen, T., Schuh, G., Apel, M., Arping, T., Bagcivan, N., Bambach, M., Baranowski, T., Bäumler, S., Beer, T., Benke, S., Bergs, T., Burggräf, P., Cabral, G. F., Eppelt, U., Fayek, P., Fey, M., Franzkoch, B., Freyberger, S., Glasmacher, L., Heesel, B., Henke, T., Herfs, W., Jansen, U., Kashko, T., Konovalov, S., Kuckhoff, B., Laschet, G., Linke, M., Lohse, W., Meisen, T., Minoufekr, M., Nöcker, J., Prahl, U., Quade, H., Rasim, M., Rauhut, M., Reinhard, R., Rosenbaum, J., Rossiter, E., Schilberg, D., Schmitz, G. J., Triebs, J., Wegner, H. u. Wesch-Potente, C.: 4. Virtual Production Systems. In: Brecher, C. (Hrsg.): Integrative production technology for high-wage countries. Springer 2012, S. 241–434

[146] Song, W., Prahl, U. u. Bleck, W. (Hrsg.): Computational simulation and atomic scale investigation of two-step bainitic phase transformation kinetics in high carbon steel 100CR6. Peking 2012

[147] Suwanpinij, P., Prahl, U., Bleck, W. u. Kawalla, R.: Fast algorithms for phase transformations in dual phase steels on a hot strip mill run-out table (ROT). Archives of Civil and Mechanical Engineering 12 (2012) 3, S. 305–311

[148] Suwanpinij, P., Prahl, U., Bleck, W. u. Kawalla, R.: Fast algorithms for phase transformations in dual phase steels on a hot strip mill run-out table (ROT). Archives of Civil and Mechanical Engineering 12 (2012) 3, S. 305–311

[149] Suwanpinij, P., Yan, D., Prahl, U. u. Bleck, W.: Phase transformation modelling for different hot rolled dual phase steels. Steel Research International SPL. ISSUE (2012), S. 903–906

[150] Twardowski, R. u. Prahl, U.: Microstructure based flow curve modeling of high-Mn steels with TWIP and TRIP effect. Computer Methods in Materials Science 12 (2012) 3, S. 130–136

[151] Twardowski, R., Steinmetz, D. u. Prahl, U.: Flow curve and failure modeling for high-Mn steels on a microstructural scale. Steel Research International 83 (2012) 4, S. 340–345

[152] Bleck, W., Hirt, G., Loosen, P., Poprawe, R., Reisgen, U., Bambach, M., Bergweiler, G., Bültmann, J., Diettrich, J., Göttmann, A., Prahl, U., Saeed-Akbari, A., Stein, L., Steiners, M., Stollenwerk, J. u. Taleb Araghi, B.: Steigerung der Leistungsfähigkeit der inkrementellen Blechumformung. In: Brecher, C. (Hrsg.): Integrative Produktionstechnik für Hochlohnländer. Springer 2011, S. 590–632

Seite 9 von 14

[153] Bleck, W., Reisgen, U., Schleser, M., Prahl, U., Mukherjee, K. u. Abdurakhmanov, A.: Konsistentes Materialmodell für Umwandlung und mechanische Eigenschaften beim Schweißen hochfester Mehrphasen-Stähle. FAT-Schriftenreihe 234 (2011)

[154] Erisir, E., Prahl, U. u. Bleck, W.: Forging Limit of High Nitrogen Steels at High Temperatures. Uluslararasi Kirilma Konferansi Bildiriler Kitabi / Proceedings of the 9th International Fracture Conference. Istanbul: A. Topuz, S. Akbarov, E. Kelesoglu 2011, S. 426–432

[155] Erisir, E., Prahl, U. u. Bleck, W.: Fractography and Hot Deformation Behavior of High Nitrogen Steels. Uluslararasi Kirilma Konferansi Bildiriler Kitabi / Proceedings of the 9th International Fracture Conference. Istanbul: A. Topuz, S. Akbarov, E. Kelesoglu 2011, S. 355–361

[156] Erisir, E., Prahl, U. u. Bleck, W. (Hrsg.): Hot Deformation Simulation of High Nitrogen Valve Steel. Elazığ, Türkei 2011

[157] Erisir, E., Prahl, U. u. Bleck, W. (Hrsg.): Scanning Electron Microscope Fractography of Fracture at High Temperature on Austenitic Steel. 2011

[158] Erisir, E., Prahl, U. u. Bleck, W. (Hrsg.): Thermodynamic Modeling and Microstructural Characterization of Precipitation in a Superduplex Steel. Elazığ, Türkei 2011

[159] Hirt, G., Bleck, W., Bobzin, K., Brecher, C., Bührig-Polazcek, A., Haberstroh, E., Klocke, F., Loosen, P., Michaeli, W., Poprawe, R., Reisgen, U., Taleb Araghi, B., Arntz, K., Bagcivan, N., Bambach, M., Bäumler, S., Beckemper, S., Bergweiler, G., Breitbach, T., Buchholz, S., Bültmann, J., Diettrich, J., Do-Khac, D., Eilbracht, S., Emonts, M., Flock, D., Gerhardt, K., Gillner, A., Göttmann, A., Grönlund, O., Hartmann, C., Heinen, D., Herfs, W., Hermani, J.-P., Holtkamp, J., Ivanov, T., Jakob, M., Janssen, A., Karlberger, A., Klaiber, F., Kutschmann, P., Neuß, A., Prahl, U., Roderburg, A., Rosen, C.-J., Rösner, A., Saeed-Akbari, A., Scharf, M., Scheik, S., Schleser, M., Schöngart, M., Stein, L., Steiners, M., Stollenwerk, J., Theiß, S. u. Wunderle, J.: 5. Hybride Produktionssysteme. In: Brecher, C. (Hrsg.): Integrative Produktionstechnik für Hochlohnländer. Springer 2011, S. 465–745

[160] Konovalov, S., Clausen, B., Hoffmann, F., Zoch, H.-W., Prahl, U. u. Bleck, W.: Simulation of particle evolution along the process chain of forged and hardened components for micro-alloyed 18CrNiMo7-6 steel [Simulation der Partikelentwicklung entlang der Prozesskette geschmiedeter und einsatzgehärteter Bauteile aus mikrolegiertem 18CrNiMo7-6]. HTM - Journal of Heat Treatment and Materials 66 (2011) 1, S. 3–11

[161] Konovalov, S., Henke, T., Benke, S., Schmitz, G. J., Bambach, M. u. Prahl, U.: Modelling the process chain of microalloyed case hardening steel for energy efficient high temperature carburising. Proceedings of the 1st World Congress on Integrated Computational Materials Engineering, ICME (2011)

[162] Konovalov, S., Prahl, U., Kohlmann, R., Kozeschnik, E. u. Bleck, W.: Precipitation development simulation of high-temperature carburization along the process chain [Simulation der Ausscheidungsentwicklung entlang der Prozesskette für das Hochtemperatur-Aufkohlen]. HTM - Journal of Heat Treatment and Materials 66 (2011) 4, S. 217–229

[163] Mosecker, L., Bleck, W., Prahl, U., Twickler, M., Raedt, H. W. u. Heizmann, J.: Mikrostrukturbasierte Modellierung des Umformverhaltens von mikrolegierten Stählen bei mehrstufigen Schmiedeprozessen. Schmiede-Journal (2011), S. 36–40

[164] Mosecker, L., Mukherjee, K., Prahl, U. u. Bleck, W.: Ver- und Entfestigung mikrolegierter AFP-Stähle bei mehrstufigen Umformprozessen. Werkstoffkennwerte für die Simulation von Umformprozessen, MEFORM 2011. Freiberg 2011, S. 190–202

[165] Mukherjee, K., Prahl, U., Bleck, W., Abdurakhmanov, A., Schleser, M. u. Reisgen, U.: Konsistentes Materialmodell für Umwandlung und mechanische Eigenschaften beim Schweißen hochfester Mehrphasen-Stähle. Sysweld Forum 2011, Tagungsband. Weimar: J. Hildebrand, T. Loose, A. Gittens 2011, S. 105–116

[166] Mukherjee, K., Ramazani, A., Yang, L., Prahl, U., Bleck, W., Reisgen, U., Schleser, M. u. Abdurakhmanov, A.: Characterization of gas metal arc welded hot rolled DP600 Steel. Steel Research International 82 (2011) 12, S. 1408–1416

[167] Prahl, U. u. Bleck, W. (Hrsg.): Steel Ab Initio - Quantum Mechanically Guided Design of a New Class of Structural Materials. Fellbach bei Stuttgart: Mathias Liewald 2011

[168] Prahl, U., Konovalov, S., Henke, T., Benke, S., Bambach, M. u. Schmitz, G. J.: Modelling the process chain of microalloyed case hardening steel for energy efficient high temperature carburizing. Proceedings of the 1st World Congress on Integrated Computational Materials Engineering, ICME. Seven Springs, Pa., USA: Wiley 2011, S. 223–228

Seite 10 von 14

[169] Prahl, U., Schmitz, G. J., Benke, S., Konovalov, S., Freyberger, S., Henke, T. u. Bambach, M. (Hrsg.): Integrative Computational Materials Engineering towards Distortion Prediction. Bremen: H.-W. Zoch, T. Lübben 2011

[170] Prahl, U., Schmitz, G. J. u. Bleck, W.: AixViPMaP® – Entwicklung einer Modellierungsplattform zur Simulation von Prozessketten. Tagungsband zum 26. Aachener Stahlkolloquium Werkstofftechnik, "Stahl Strukturen – Industrie-, Forschungs-, Mikro-, Bauteilstrukturen. Aachen: Bleck, W 2011, S. 215–224

[171] Quade, H., Prahl, U. u. Bleck, W.: Microstructure based hardening model for transformation induced plasticity (TRIP) steels. Chemicke Listy 105 (2011) 17, s705-s708

[172] Quade, H., Rudnizki, J., Prahl, U. u. Bleck, W.: Berechnung von mechanischen Eigenschaften von mehrphasigen Stählen mit der Technik des repräsentativen Volumenelements. Tagungsband zum 26. Aachener Stahlkolloquium Werkstofftechnik, "Stahl Strukturen – Industrie-, Forschungs-, Mikro-, Bauteilstrukturen. Aachen: Bleck, W 2011, S. 49–61

[173] Rudnizki, J., Böttger, B., Prahl, U. u. Bleck, W.: Phase-field modeling of austenite formation from a ferrite plus pearlite microstructure during annealing of cold-rolled dual-phase steel. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 42 (2011) 8, S. 2516–2525

[174] Schmitz, G. J., Benke, S., Laschet, G., Apel, M., Prahl, U., Fayek, P., Konovalov, S., Rudnizki, J., Quade, H., Freyberger, S., Henke, T., Bambach, M., Rossiter, E. A., Jansen, U. u. Eppelt, U.: Towards integrative computational materials engineering of steel components. Production Engineering 5 (2011) 4, S. 373–382

[175] Schmitz, G. J., Benke, S., Laschet, G., Apel, M., Rosenbaum, J., Prahl, U., Fayek, P., Konovalov, S., Quade, H., Freyberger, S., Henke, T., Bambach, M., Arping, T., Baranowski, T., Heesel, B., Eppelt, U., Jansen, U., Rossiter, E., Kuckhoff, B., Gries, T., Linke, M., Kashko, T., Bobzin, K. u. Bagcivan, N.: Integrative Prozessketten-Simulation für Werkstoff- und Fertigungstechnologien. In: Brecher, C. (Hrsg.): Integrative Produktionstechnik für Hochlohnländer. Springer 2011, S. 342–399

[176] Schmitz, G. J. u. Prahl, U.: Towards a virtual platform for materials processing. Proceedings of the 1st World Congress on Integrated Computational Materials Engineering, ICME (2011)

[177] Schulz, W., Bischof, C., Bobzin, K., Brecher, C., Gries, T., Jeschke, S., Kampker, A., Klocke, F., Kuhlen, T., Schuh, G., Apel, M., Arping, T., Bagcivan, N., Bambach, M., Baranowski, T., Bäumler, S., Beer, T., Benke, S., Bergs, T., Burggräf, P., Cabral, G. F., Eppelt, U., Fayek, P., Fey, M., Franzkoch, B., Freyberger, S., Glasmacher, L., Heesel, B., Henke, T., Herfs, W., Jansen, U., Kashko, T., Konovalov, S., Kuckhoff, B., Laschet, G., Linke, M., Lohse, W., Meisen, T., Minoufekr, M., Nöcker, J., Prahl, U., Quade, H., Rasim, M., Rauhut, M., Reinhard, R., Rosenbaum, J., Rossiter, E., Schilberg, D., Schmitz, G. J., Triebs, J., Wegner, H. u. Wesch-Potente, C.: 4. Virtuelle Produktionssysteme. In: Brecher, C. (Hrsg.): Integrative Produktionstechnik für Hochlohnländer. Springer 2011, S. 257–464

[178] Shafiei Sabet, P., Konovalov, S., Prahl, U., Henke, T. u. Bambach, M.: AixViPMaP® – Anwendung einer Simulationsplattform auf die Prozessketten bei der HT-Aufkohlung. Sysweld Forum 2011, Tagungsband. Weimar: J. Hildebrand, T. Loose, A. Gittens 2011, S. 166–174

[179] Song, W., Prahl, U. u. Bleck, W. (Hrsg.): Atomic Analysis on Bainitic Reaction in High Carbon Steel 100Cr6. Seoul, Korea 2011

[180] Song, W., Prahl, U. u. Bleck, W. (Hrsg.): Atomic scale observation on second phase precipitation in bainite reaction in high carbon steel. Aachen: Bleck, W 2011

[181] Song, W., Prahl, U., Bleck, W. u. Mukherjee, K.: Phase-Field Simulations of Bainitic Phase Transformation in 100CR6. Supplemental Proceedings: Materials Fabrication, Properties, Characterization, and Modeling 2 (2011)

[182] Twardowski, R., Steinmetz, D. u. Prahl, U. (Hrsg.): Flow curve and failure modelling for high-Mn steels on a microstructural scale. Seoul, Korea 2011

[183] Uthaisangsuk, V., Muenstermann, S., Prahl, U., Bleck, W., Schmitz, H.-P. u. Pretorius, T.: A study of microcrack formation in multiphase steel using representative volume element and damage mechanics. Computational Materials Science 50 (2011) 4, S. 1225–1232

[184] Uthaisangsuk, V., Prahl, U. u. Bleck, W.: Modelling of damage and failure in multiphase high strength DP and TRIP steels. Engineering Fracture Mechanics 78 (2011) 3, S. 469–486

[185] Bleck, W. u. Prahl, U.: Neue Methoden des Werkstoffdesigns hochfester Stähle. 2nd International Conference on Advanced Metal Forming Processes in Automotive Industry, AutoMetForm 2010, 17. Sächsische Fachtagung Umformtechnik SFU 2010, Tagungsband. Freiberg: Kawalla, R 2010, S. 275–285

Seite 11 von 14

[186] Bleck, W. u. Prahl, U.: Stahlentwicklung am Computer. Möglichkeiten und Grenzen der Werkstoffmodellierung. Tagungsband zum 25. Aachener Stahlkolloquium Umformtechnik, “Globale Herausforderungen: Neue Märkte für die Umformtechnik”. Aachen 2010, S. 193–204

[187] Clausen, B., Konovalov, S., Hoffmann, F., Prahl, U., Zoch, H.-W. u. Bleck, W.: Feinkornbeständigkeit von Bauteilen aus dem mikrolegierten Werkstoff 18CrNiMo7-6 in Abhängigkeit der Prozesskette. HTM - Journal of Heat Treatment and Materials 65 (2010) 5, S. 257–268

[188] Erisir, E., Prahl, U. u. Bleck, W.: Effect of precipitation on hot formability of high nitrogen steels. Materials Science and Engineering A 528 (2010) 1, S. 519–525

[189] Mukherjee, K., Prahl, U., Bleck, W., Reisgen, U., Schleser, M. u. Abdurakhmanov, A.: Characterization and modelling techniques for gas metal arc welding of DP 600 sheet steels. Materialwissenschaft und Werkstofftechnik 41 (2010) 11, S. 972–983

[190] Mukherjee, M., Prahl, U. u. Bleck, W.: Modelling of microstructure and flow stress evolution during hot forging. Steel Research International 81 (2010) 12, S. 1102–1116

[191] Prahl, U. u. Bleck, W.: Stahlentwicklung am Computer schützt vor Fehlinvestitionen. Maschinenmarkt 40 (2010), S. 50–52

[192] Reisgen, U., Mokrov, O., Rossiter, E., Bleck, W., Gazdag, S., Rieger, T. u. Prahl, U. (Hrsg.): Welding process simulation for the calculation of an equivalent heat source. Graz-Seggau: Verlag der Technischen Universität Graz 2010

[193] Rieger, T., Gazdag, S., Prahl, U., Mokrov, O., Rossiter, E. u. Reisgen, U.: Simulation of welding and distortion in ship building. Advanced Engineering Materials 12 (2010) 3, S. 153–157

[194] Rudnizki, J., Zeislmair, B., Prahl, U. u. Bleck, W.: Prediction of abnormal grain growth during high temperature treatment. Computational Materials Science 49 (2010) 2, S. 209–216

[195] Rudnizki, J., Zeislmair, B., Prahl, U. u. Bleck, W.: Thermodynamical simulation of carbon profiles and precipitation evolution during high temperature case hardening. Steel Research International 81 (2010) 6, S. 472–476

[196] Schmitz, G. J., Benke, S., Laschet, G., Apel, M., Prahl, U., Fayek, P., Konovalov, S., Rudnizki, J., Quade, H., Freyberger, S., Henke, T., Bambach, M., Rossiter, E., Jansen, U. u. Eppelt, U.: Towards Integrative Computational Materials Engineering of Steel Components. In: Production engineering: research and development. Springer 2010, S. 373–382

[197] Song, W., Francke, N. C. F., Prahl, U. u. Bleck, W.: Modeling of Bainitic Phase Transformation in High Carbon Steel. Proceedings of International Conference on Advanced Steels 2010, ICAS 2010. Guilin, China: Yuqing Weng, Han Dong, Yong Gan 2010

[198] Suwanpinij, P., Mukherjee, K., Graf, M., Prahl, U., Bleck, W. u. Kawalla, R.: Towards modelling of phase transformation and mechanical properties in hot rolled dual phase steel. TMS Annual Meeting 1 (2010)

[199] Suwanpinij, P., Togobytska, N., Prahl, U., Weiss, W., Hömberg, D. u. Bleck, W.: Numerical cooling strategy design for hot rolled dual phase steel. Steel Research International 81 (2010) 11, S. 1001–1009

[200] Uthaisangsuk, V., Prahl, U. u. Bleck, W.: Microstructure-Based Formability Characterisation of Multi Phase Steels Using Damage Mechanics. Particle and Continuum Aspects of Mesomechanics (2010)

[201] Benke, S., Dziallach, S., Laschet, G., Prahl, U. u. Bleck, W.: Modeling of the uniaxial tensile and compression behavior of semi-solid A356 alloys. Computational Materials Science 45 (2009) 3, S. 633–637

[202] Bleck, W., Rieger, T., Prahl, U., Reisgen, U., Abdurakhmanov, A. u. Mokrov, O.: Vorhersage lokaler mechanischer Eigenschaften in Schweißnähten (2009), S. 103–127

[203] Dziallach, S., Benke, S., Prahl, U. u. Bleck, W.: Experimental characterisation of a semi-solid A356 alloy During solidification and remelting. International Journal of Cast Metals Research 22 (2009) 1-4, S. 248–251

[204] Gazdag, S., Rieger, T., Prahl, U. u. Bleck, W.: Simulation des Schweißens und Verzuges im Schiffsbau. Sysweld Forum 2009, Tagungsband. Weimar: Universitätsverlag Weimar 2009, S. 49–53

[205] Prahl, U., Schmitz, G. J. u. Bleck, W.: AixViPMaP® - Entwicklung einer virtuellen Plattform für das Processing von Werkstoffen. Sysweld Forum 2009, Tagungsband. Weimar: Universitätsverlag Weimar 2009, S. 254–265

[206] Rudnizki, J., Zeislmair, B., Prahl, U. u. Bleck, W.: Microstructure simulation during high temperature case hardening [Gefügesimulation beim Hochtemperatur- Einsatzhärten]. HTM - Journal of Heat Treatment and Materials 64 (2009) 3, S. 176–185

Seite 12 von 14

[207] Saeed-Akbari, A., Imlau, J., Prahl, U. u. Bleck, W.: Derivation and variation in composition-dependent stacking fault energy maps based on subregular solution model in high-manganese steels. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 40 (2009) 13, S. 3076–3090

[208] Schmitz, G. J. u. Prahl, U.: Toward a virtual platform for materials processing. JOM 61 (2009) 5, S. 19–23

[209] Suwanpinij, P., Rudnizki, J., Prahl, U. u. Bleck, W.: Investigation of the effect of deformation on γ-α phase transformation kinetics in hot-rolled Dual phase steel by phase field approach. Steel Research International 80 (2009) 9, S. 616–622

[210] Uthaisangsuk, V., Prahl, U. u. Bleck, W.: Characterisation of formability behaviour of multiphase steels by micromechanical modelling. International Journal of Fracture 157 (2009) 1-2, S. 55–69

[211] Uthaisangsuk, V., Prahl, U. u. Bleck, W.: Failure modeling of multiphase steels using representative volume elements based on real microstructures. Procedia Engineering 1 (2009) 1

[212] Uthaisangsuk, V., Prahl, U. u. Bleck, W.: Microstructure based failure analysis of multiphase steels using damage mechanics modeling. TMS Annual Meeting 2 (2009)

[213] Uthaisangsuk, V., Prahl, U. u. Bleck, W. (Hrsg.): Mikrostruktur basierte Modellierung von Eigenschaften und Versagen von Mehrphasenstählen. Leoben, Österreich 2009

[214] Uthaisangsuk, V., Prahl, U. u. Bleck, W.: Stretch-flangeability characterisation of multiphase steel using a microstructure based failure modelling. Computational Materials Science 45 (2009) 3, S. 617–623

[215] Benke, S., Rudnizki, J. u. Prahl, U. (Hrsg.): Modeling hot rolling. A study on the microstructural changes during the Austenite to Ferrite phase transformation in dual phase steels. 2008

[216] Bernhard Fuchsbauer, H.-J. W., Thomser, C., Prahl, U., Vegter, H. u. Bleck, W. (Hrsg.): Simulation of mechanical properties based on microstructure for Dual Phase Steels. Wiesbaden: Stahleisen 2008

[217] Ed. by Bernhard Fuchsbauer, H.-J. W., Münstermann, S., Uthaisangsuk, V., Prahl, U. u. Bleck, W. (Hrsg.): Improved characterization of formability for sheet steels. Wiesbaden: Stahleisen 2008

[218] Erisir, E., Prahl, U. u. Bleck, W. (Hrsg.): Investigations on Hot Deformation and Precipitation Behaviour of High Nitrogen Steels. Pohang, Südkorea 2008

[219] Laschet, G., Benke, S., Caylak, I., Pape, L., Dziallach, S., Mahnken, R., Modigell, M., Prahl, U. u. Bleck, W. (Hrsg.): Thermomechanical modeling and characterization of the semi-solid state of A356 alloys during solidification. 2008

[220] Naderi, M., Uthaisangsuk, V., Prahl, U. u. Bleck, W.: A numerical and experimental investigation into hot stamping of boron alloyed heat treated steels. Steel Research International 79 (2008) 2, S. 77–84

[221] Prahl, U., Schmitz, G. J. u. Bleck, W.: AixViPMaP®. Entwicklung einer virtuellen Plattform zur Prozessmodellierung von Werkstoffen. Werkstofftechnik, Tagungsband zum 23. Aachener Stahlkolloquium “Stahl – ein exzellenter Werkstoff”. Aachen 2008, S. 135–149

[222] Suwanpinij, P., Prahl, U., Bleck, W., Togobytska, N. u. Hömberg, D.: Modelling of deformation-accelerated phase transformation of hot rolled dual phase steels. 3rd International Conference on Thermomechanical Processing of Steels, TMP 2008 (2008)

[223] Suwanpinij, P., Togobytska, N., Keul, C., Weiss, W., Prahl, U., Hömberg, D. u. Bleck, W.: Phase transformation modelling and parameter identification from dilatometric investigations. Steel Research International 79 (2008) 10, S. 793–799

[224] Uthaisangsuk, V., Binsbergen, B. von, Prahl, U. u. Bleck, W. (Hrsg.): Modelling of damage and fracture in the microstructure of multiphase steels. 2008

[225] Uthaisangsuk, V., Prahl, U. u. Bleck, W.: Micromechanical modelling of damage behaviour of multiphase steels. Computational Materials Science 43 (2008) 1, S. 27–35

[226] Uthaisangsuk, V., Prahl, U. u. Bleck, W.: Spannungsbasiertes Versagenskriterium zur Charakterisierung der Umformbarkeit. Werkstofftechnik, Tagungsband zum 23. Aachener Stahlkolloquium “Stahl – ein exzellenter Werkstoff”. Aachen 2008, S. 197–207

[227] Uthaisangsuk, V., Prahl, U., Münstermann, S. u. Bleck, W.: Experimental and numerical failure criterion for formability prediction in sheet metal forming. Computational Materials Science 43 (2008) 1, S. 43–50

[228] Bleck, W., Brühl, S., Gerdemann, F. u. Prahl, U. (Hrsg.): Gefüge-Engineering bei kaltumformbaren Stählen. Aachen 2007

[229] Bleck, W., Münstermann, S. u. Prahl, U.: Numerische Zähigkeitsmodellierung. 8. Tagung Gefüge und Bruch. Bochum 2007

Seite 13 von 14

[230] Bleck, W., Münstermann, S., Rieger, T. u. Prahl, U. (Hrsg.): Modellierung des Versagensverhaltens von Schweißverbindungen. Aachen: Uwe Reisgen 2007

[231] Bleck, W., Uthaisangsuk, V., Naderi, M. u. Prahl, U. (Hrsg.): Numerical and Experimental Simulation of Hot Stamping. Düsseldorf: Stahleisen 2007

[232] Münstermann, S., Prahl, U. u. Bleck, W.: Numerical modelling of toughness and failure processes in steel structures. Steel Research International 78 (2007) 3, S. 224–235

[233] Münstermann, S., Uthaisangsuk, V., Prahl, U. u. Bleck, W.: Experimental and numerical failure criteria for sheet metal forming. Steel Research International 78 (2007) 10-11, S. 762–770

[234] Prahl, U., Bleck, W., Hollands, A.-P., Senk, D., Li, X., Hirt, G., Kopp, R., Pavlyk, V. u. Dilthey, U.: From Casting to Product Properties. Modeling the Process Chain of Steels (TP C7). Integral Materials Modeling: Towards Physics-Based Through-Process Models (2007)

[235] Prahl, U., Papaefthymiou, S., Uthaisangsuk, V., Bleck, W., Sietsma, J. u. van der Zwaag, S.: Micromechanics-based modelling of properties and failure of multiphase steels. Computational Materials Science 39 (2007) 1 SPEC. ISS, S. 17–22

[236] Schneider, M., Jannot, E., Mohles, V., Gottstein, G., Walter, C., Hallstedt, B., Schneider, J. M., Warnken, N., Steinbach, I., Gerdemann, F., Prahl, U. u. Bleck, W.: Simulation of Phase Changes During Thermal Treatments of Various Metal Alloys (TP B2). Integral Materials Modeling: Towards Physics-Based Through-Process Models (2007)

[237] Thomser, C., Prahl, U., Vegter, H. u. Bleck, W.: Modelling the mechanical properties of multiphase steels. Computer Methods in Materials Science 7 (2007) 1, S. 42–46

[238] Thomser, C., Vegter, H., Prahl, U. u. Bleck, W. (Hrsg.): Modelling the Mechanical Properties of Multiphase Steels Based on Microstructure. Györ, Ungarn: Miklós Tisza 2007

[239] Uthaisangsuk, V., Dziallach, S., Prahl, U. u. Bleck, W.: Ermittlung des Fließverhaltens metallischer Werkstoffe bei erhöhten Temperaturen mittels optischer Messmethode und numerischer Simulation. Konstruktion, Qualitäätssicherung und Schadensanalyse, Tagung „Werkstoffprüfung 2007“. Neu-Ulm: Stahleisen 2007, S. 179–184

[240] Uthaisangsuk, V., Prahl, U. u. Bleck, W.: Microstructure based formability characterization of multi phase steels using damage mechanics. Key Engineering Materials 348-349 (2007), S. 217–220

[241] Uthaisangsuk, V., Prahl, U. u. Bleck, W.: Stress based failure criterion for formability characterisation of metastable steels. Computational Materials Science 39 (2007) 1 SPEC. ISS, S. 43–48

[242] Uthaisangsuk, V., Prahl, U., Münstermann, S. u. Bleck, W.: Gefügebasierte Kriterien zur Vorhersage der Umformbarkeit von hochfesten Mehrphasenstählen. 8. Tagung Gefüge und Bruch. Bochum 2007

[243] Heßling, G., Prahl, U. u. Bleck, W.: Materials Research for New Steels. Metalni i nemetalni anorganski materijali / Metallic and nonmetallic inorganic materials, 6th Scientific/Research Symposium, proceedings. Zenica, Bosnien und Herzegovina 2006, S. 1–6

[244] Münstermann, S., Prahl, U., Uthaisangsuk, V. u. Bleck, W.: Experimentelle und numerische Versagenskriterien für die Blechumformung. Fortschritte der Kennwertermittlung für Forschung und Praxis, Tagung "Werkstoffprüfung. Bad Neuenahr: Stahleisen 2006, S. 213–220

[245] Papaefthymiou, S., Prahl, U., Bleck, W., van der Zwaag, S. u. Sietsma, J.: Experimental observations on the correlation between microstructure and fracture of multiphase steels. International Journal of Materials Research 97 (2006) 12, S. 1723–1731

[246] Pariser, G., Prahl, U. u. Bleck, W.: Experimental and numerical simulation of the austenite-ferrite phase transformation. Drawing the things to come - Trends and Advances in Sheet Metal Forming, IDDRG 2006, proceedings of the 25th International Deep Drawing Research Group Conference. Porto, Portugal 2006

[247] Uthaisangsuk, V., Prahl, U. u. Bleck, W. (Hrsg.): Ermittlung von Grenzformspannungsdiagrammen zur Werkstoffcharakterisierung für die Blechumformung. 2006

[248] Uthaisangsuk, V., Prahl, U. u. Bleck, W. (Hrsg.): Mikromechanische Modellierung des Versagens von Mehrphasenstählen. Aachen 2006

[249] Bleck, W., Heßling, G. u. Prahl, U.: Werkstofftechnische Forschung am Institut für Eisenhüttenkunde der RWTH Aachen. BHM Berg- und Huttenmannische Monatshefte 150 (2005) 11, S. 379–385

[250] Kawalla, R., Prahl, U., Pariser, G., Gerdemann, F. u. Bleck, W. (Hrsg.): Physikalisch-basiertes Prozessmodell zur Herstellung von DP-Stählen. Freiberg: Freiberger Forschungshefte B 332 2005

Seite 14 von 14

[251] Prahl, U. u. Bleck, W. (Hrsg.): Werkstoff- und Prozessentwicklung mit Hilfe experimenteller und numerischer Simulation. Aachen 2005

[252] Uthaisangsuk, V., Prahl, U. u. Bleck, W. (Hrsg.): Einfluss von Spannungs- und Temperaturzustand bei Bulge- und Lochaufweitungsversuchen von Stählen mit metastabilen Gefügen. Aachen 2005

[253] Uthaisangsuk, V., Prahl, U., Blumbach, M. u. Bleck, W. (Hrsg.): Online-Erfassung von Fließkurven und Formänderungswegen während des hydraulischen Tiefungsversuchs an neu entwickelten Tiefziehstählen. Aachen 2005

[254] Lamberigts, M., Prahl, U., Lorenz, U., Guindani, A. u. Bleck, W. (Hrsg.): Process Window for Hot-Rolled Dual Phase Steel. Lüttrich, Belgien: Stahleisen 2004

[255] Papaefthymiou, S., Bleck, W., Prahl, U., Acht, C., Sietsma, J. u. van der Zwaag, S.: Micromechanical damage simulations of TRIP steels. Materials Science Forum 426-432 (2003) 2, S. 1355–1360

[256] Prahl, U., Rehbach, W., Kuckertz, C., Weichert, D. u. Bleck, W.: Ductile damage prediction on the basis of microstructural observations. Key Engineering Materials 251-252 (2003), S. 351–356

[257] Rehbach, W., Prahl, U., Kuckertz, C. u. Bleck, W.: Automatic ductile damage detection in microalloyed fine-grain steels. Microscopy and Microanalysis 9 (2003) SUPPL. 2, S. 90–91

[258] Prahl, U.: Schädigung und Versagen mikrolegierter Feinkornstähle in Experiment und Simulation, Technische Hochschule Aachen 2002

[259] Prahl, U., Bourgeois, S., Pandorf, T., Aboutayeb, M., Debordes, O. u. Weichert, D.: Damage parameter identification by a periodic homogenization approach. Computational Materials Science 25 (2002) 1-2, S. 159–165

[260] Aboutayeb, S. M., Prahl, U. u. Weichert, D. (Hrsg.): Simulation du comportement a l’endommagement d’un materiau a deux phases. Toulouse 1999

[261] Prahl, U., Aboutayeb, M., Weichert, D., Achenbach, U.-J. u. Wang, X.: Damage evolution in experiments and simulation in a construction steel. Computational Materials Science 16 (1999) 1-4, S. 206–212

[262] Prahl, U., Aboutayeb, S. M., Kuckertz, C., Wang, X. u. Weichert, D. (Hrsg.): Damage parameter identification for microalloyed S460M-steel. 1999

[263] Achenbach, U.-J., Klingbeil, S., Prahl, U., Dahl, W. u. Bleck, W.: Microstructural effects on damage mechanics in constructional steel. Fracture from defects: proceedings of the 12th Bienniel Conference on Fracture – ECF 12, Sheffield, U.K. Sheffield, U.K. 1998

[264] Pandorf, T., Prahl, U. u. Weichert, D.: Investigations on damage localization in notched cylindrical specimen. Constitutive and damage modeling of inelastic deformation and phase transformation: Proceedings of Plasticity ’99: the 7th International Symposium on Plasticity and its Current Applications. Cancun, Mexico: Neat Press 1998

[265] Kittner, K., Ullmann, M., Luft, J., Berge, F., Kawalla, R. u. Prahl, U.: Charakterisierung des Ver- und Entfestigungsverhaltens der Mg-6,8Y-2,5Zn-0,5Al-Magnesiumlegierung anhand von kontinuierlichen Flachstauchversuchen. In: Sächsische Allianz für material- und ressourceneffiziente Technologien, S. 15–18