VEL TECH HIGH TECH Dr.RANGARAJAN Dr.SAKUNTHALA … - 2020 Issue... · 2020-02-10 · Department of...
Transcript of VEL TECH HIGH TECH Dr.RANGARAJAN Dr.SAKUNTHALA … - 2020 Issue... · 2020-02-10 · Department of...
VEL TECH HIGH TECH Dr.RANGARAJAN
Dr.SAKUNTHALA ENGINEERING COLLEGE
DEPARTMENT OF MECHANICAL ENGINEERING
HORIZON
Department of Mechanical Engineering
NEWSLETTER ISSUE 1 VOL 10
July 2019 - September 2019
Department of Mechanical Engineering HORIZON Issue 1, Vol 10
2
Department of Mechanical Engineering Newsletter © Vel Tech High Tech Dr. Rangarajan Dr. Sakunthala Engineering College,
Chennai Chief Editor:
M.Muralidharan, Asst Professor, Mech.
Associate Editor: A.Arun, Asst Professor, Mech.
Editorial Board: Jeffrin Jen.J, VH 8086, IV Mech.
Pon Palani Kiran.B, VH 8719, III Mech. Vignesh.S, VH 8771, III Mech. Sharan Shakthivel. B, VH9791, II Mech.
Department of Mechanical Engineering HORIZON Issue 1, Vol 10
3
Principal Message
It is pleasure to present the quarterly issue of the Newsletter of Vel Tech
High Tech Dr.Rangarajan Dr.Sakunthala Engineering College for the year 2019-
2020. I am very happy to meet you through this page. Vel Tech High Tech has
stood above the rest in its approach to education and in its pedagogies. The
ways we teach and the ways our students learn are unique and creative.
Education is not an act of acquiring knowledge but learning a skill to lead life
and forming one’s personality. Many constructive efforts have been taken to
improve our college results. As campus placements are progressing, efforts to
groom the students to serve the society are also in pace. I wish to record my
hearty congratulations to those who have brought laurels to the institution and
I appreciate all of you for working together as a team for the success of this
“Department of Mechanical Engineering Newsletter”.
Department of Mechanical Engineering HORIZON Issue 1, Vol 10
4
Outcome Based Education (OBE)
Education forms the back bone of any country. System of Education
reveals the quality. As we know India has a population that is the youngest in
world and by 2020 we will have youngsters in the age of 21-24 who will be at
the start of their career, looking for good opportunities. But, in recent years in
our country we have seen a sharp decline in the employability of students
graduating from technical education, which proves to be a potential threat for a
nation that has youngest population.
Lot of initiatives that were taken to improve that quality of students, but
those gave little or no improvement. Based on lot of analysis Government
identified that the students lacked the potential skills and knowledge that are
required for employability or for pursuing higher education.
To bring improvement in the quality of education Indian Government
signed and became a permanent member of the “WASHINGTON ACCORD” on
13th June 2014, and started bringing reform under the initiative “OUTCOME
BASED EDUCATION”.
Understanding this impact and having extreme concerns over the quality
of students graduating and also the quality of graduates that we must produce
for our nation, we at our institution unanimously decided to follow the
OUTCOME BASED EDUCATION, to produce graduates who will bring up the
nation and who will shoulder great responsibilities in the near future.
OBE as the name indicates concentrates on the improvement of the
“outcomes or the required skills and knowledge” that a sudden must have at
the time of graduating. We at our institution and in turn in our school take
serious concern in attaining the attributes defined globally for the graduates.
Each program and the courses in a program are decided and also designed to
give specific skills required to enhance the quality.
Therefore, in our institution various skill development activities initiated
by our Principal Dr.E.Kamalanaban are being conducted in a way to aid the
cause of improvement.
Department of Mechanical Engineering HORIZON Issue 1, Vol 10
5
INSTITUTION VISION AND MISSION VISION
❖ Pursuit of excellence in technical education to create civic responsibility
with competency.
MISSION
❖ To impart the attributes of global engineers to face industrial challenges
with social relevance.
❖ To indoctrinate as front runners through moral practices. ❖ To attain the skills through lifelong learning.
DEPARTMENT OF MECHANICAL ENGINEERING
VISION
❖ To produce industry ready, innovative and creative Mechanical Engineers
to meet societal challenges with moral values and research knowledge.
MISSION
❖ To impart high quality of Mechanical Engineering knowledge to students
and enhance their skills to fit for industrial practices. ❖ To inspire dynamic potential minds to think innovatively and involve
them in research and consultancy.
❖ To confer the right extent of morals, ethical values and lifelong learning to empower the general public and to make noteworthy commitments.
Program Educational Objectives (PEOs)
On completion of the programme, our students will,
PEO1— Design, develop and establish newer mechanical system using emerging techniques such as ANSYS, 3D Printing and Smart Materials to enhance the productivity with international standards.
PEO2— Provide sustainable, cost effective and eco-friendly methodologies for improving existing Mechanical system.
PEO3— Use modern analysis and design tools such as CATIA, ANSYS and Solid
Works, to enhance quality in Mechanical Engineering domain.
Department of Mechanical Engineering HORIZON Issue 1, Vol 10
6
Programme Specific Program Outcomes (PSO) By the time of graduation, Mechanical Engineering students can
PSO1— Apply fundamental knowledge in mathematics, science and engineering for contributing to higher studies, teaching profession, research activities, and development of mechanical engineering and allied fields.
PSO2— Apply computational methods and analytical techniques for planning
and analyzing mechanical engineering real life problems, designing the safe, economic and managing technical activities involved in mechanical engineering and allied projects.
PSO3— Exhibit ethics in collaboration with other members of multi-domain
professional teams for the development of national sustainability.
CONFERENCE ORGANISED
Sl.
No
Name of the Conference No. of Papers
Received and
Published
Date of the
Event
Name of the Resource
Person
1. Aavishkaar-2019 32 09 -08-19 &
10-08-19
Dr.E.Natarajan
Professor
Institute for Energy
Studies
Department of
Mechanical Engineering
Anna University
Chennai - 600 025
Department of Mechanical Engineering conducted a National Conference on “AAVISHKAAR” 2019 on 09 & 10–08-2019. Principal Dr. E Kamalanaban presided over the conference. The chief guest, Dr.E.Natarajan Professor Institute for Energy Studies
Department of Mechanical Engineering Anna University also part of the function. Delegates from all over India participated in the
Conference. There were more parallel sessions in which research papers were presented on different themes.
Department of Mechanical Engineering HORIZON Issue 1, Vol 10
7
STUDENT CORNER
INDUSTRIAL VISITS
Visit No 1: Neyveli Lignite Corporation Ltd (NLC)
Date of Visit: 5th Aug 2019 &9th Aug 2019
The Department of Mechanical Engineering arranged an Industrial
Visit on 5th Aug 2019 and 9th Aug 2019 to Neyveli Lignite
Corporation Ltd (NLC), Cheyyar for the V Semester Students.
Faculty Mr.T.V.B.Babu, AP, Mr.R.Manjunathan, AP and Mr.A.Arun
Department of Mechanical accompanied the students to the visit.
In this industrial visit, students learned functional understanding
of Electricity generation and Distribution and also coal separation
process.
Department of Mechanical Engineering HORIZON Issue 1, Vol 10
8
Visit No 2: Pennar Industries Ltd Date of Visit: 24th Sep 2019
The Department of Mechanical Engineering arranged an Industrial
Visit on 24th Sep 2019 to Pennar Industries Ltd, Periyapaalliyam,
Chennai for the III Semester Students. Faculty Mr. S.
Rajamanickam, AP, Mr. S. Satheesh Kumar, AP and Mr.A.Arun
Department of Mechanical accompanied the students to the visit.
In this industrial visit, students Understanding the small
engineering works like metal cutting, punching operation and
manufacturing of solar panels for domestic and international uses.
PARTICIPATION/PAPER PRESENTATIONS IN CONFERENCES
S.NO VH NO
Name Sem Conference and Paper Title Hosted by Date and
Venue
1 8086 Jeffrin Jen J 7 ENERGEEECE’19 JNN Institute
of Engineering
14.09.2019
2
7301 7293
7308
NathishKumar N, Pradeep Kumar S Venkat J
2019 Passed
out
Aavishkaar 2019 Design and Fabrication of Fresnel Lens
Solar Air Heater
Veltech Hightech
Dr.Rangarajan
Dr.Sakunthala Engineering
College
09.08.2019
3 7365 7357
Abhishek A, Jachin Luke
2019 Passed
out
Aavishkaar 2019 Cycle Time Reduction in Tappet Clearance Setting Stage
Veltech Hightech
Dr.Rangarajan
Dr.Sakunthal
09.08.2019
Department of Mechanical Engineering HORIZON Issue 1, Vol 10
9
a Engineering College
4
7320 7383
7300
Muthukumaran S, Pradeep kumar D, Vigneshwaran
2019 Passed
out
Aavishkaar 2019 Investigation of Surface Roughness in ohns/en24 Alloy Steels
Veltech Hightech
Dr.Rangarajan
Dr.Sakunthala Engineering
College
09.08.2019
5
7314 7326
7316
Praveen Kumar D, Raj Kumar M, Sanjay Karthick S
2019 Passed
out
Aavishkaar 2019 Design and Analysis of Single Bellow
Expansion
Veltech Hightech
Dr.Rangarajan
Dr.Sakunthala Engineering
College
09.08.2019
WORKSHOPS/SYMPOSIUM
S.NO VH NO
Name Semester Workshop/Symposium Hosted by Date and
Venue
1 8750 Godwin
Joseph A
5 IC Engines Dismantling
and Assembling
Meenakshi Sudharajan College of
Engineering
20.08.2019
2 8761 Kuralarasan K
3 8704 Hariharan V
4 8768 Bharathkumar
S
5 8764 Bhrathi P
6 8692 Ajay Joyson
7 8691 Aakash M
8 8740 Dinesh B S
9 8697 Dinesh Kumar
A
10 8699 Eswar
Arunachalam M 11 8770 Akashraja SR
5 Industrial Automation Chennai
Institute of Technology
13.09.2019
12 8794 Barath Kumar
T
13 8749 Karthikeyan
14 8776 Barathi M
15 8772 Logesh D
16 8761 Kuralarasan K
17 8742 Dinesh R
5 Industrial Automation Chennai
Institute of Technology
13.09.2019 18 8702 Gowtham H
19 8780 Ganesh
Kumaran S
20 8755 Karthik P
Department of Mechanical Engineering HORIZON Issue 1, Vol 10
10
21 8700 Gokul K
22 8707 Keerthan M R
23 8705 Hitheshraj M
R
24 8694 Anish K Mathews
25 8731 Subash
Kumar N
26 8784 Ponnarasu P
M
27 8747 Viswas S
28 8759 Sikkandar A
29 8753 Surya Balaji R
5 Industrial Revolution
on Cutting Edge Technology
Saveetha Engineering
College 06.09.2019
30 8729 Sathyaseelan
M
31 8722 Pradeep P
32 8718 Pravin P
33 8737 Venkat karthik
34 8739 Yogesh Kumar
J
35 8728 Saranraj S
36 8730 Shreeram M
37 8708 C.G.Logesh 5 PROTOCOL NAT.level
Symposium-Aeromodeling
Sri Venkateshwara
College Of Engineering
27.09.2019
38 8708 C.G.Logesh 5 PROTOCOL NAT.level
Symposium - MYSTERY FILES
Sri Venkateshwara
College Of Engineering
27.09.2019
39 8708 C.G.Logesh 5 PROTOCOL NAT.level
Symposium – HOURCRUX HUNT
Sri Venkateshwara
College Of Engineering
24.09.2019
AWARDS
S.No VH No. Name Yr Date Title of the Conference
Paper Title/Event
Other Information
1 8086 J.Jeffrin
Jen 4
14.09.2019
ENERGEEECE’19 Kickout 1st place
2 8086 8064
J.Jeffrin Jen
Aswath.T
4 09.08.2019
Aavishkaar2019 Hydrabot 2nd place
3 8719 Pon Palani
kiran 3
18.10.2019
MEPSILON 2K19 Adzap 2nd place
4 8775 Sivaprasad.
V 3
18.10.
2019 MEPSILON 2K19 Holloween
Hunt 3rd place
5 8771 Vignesh.S 3 18.10.
2019 MEPSILON 2K19 Gaming 1st place
Department of Mechanical Engineering HORIZON Issue 1, Vol 10
11
BON VOYAGE
Our Honorable Founder & President Col.Prof.Vel.Dr.R.Rangarajan funds
and supports Scholarship Programs to benefit graduate and postgraduate
students studying for a career in top universities of the world. And for this
academic year Mr. Janakiraman.K and Mr. Harish Batch (2013-2017) bags the
Scholarship Award. He had enrolled for a M.S programme in Process
Engineering at CZECH Technical University, CZECH Republic and in order to
felicitate him, a Bon Voyage programme was organized by the Department of
Mechanical Engineering along with Higher Education Cell. An amount of Rs
10k was given by our Honorable Chairman as a token of appreciation.
Department of Mechanical Engineering HORIZON Issue 1, Vol 10
12
FACULTY CORNER
PAPER PRESENTATIONS AND CONFERENCES
S.No HTS No.
Name Date Title of the Conference
and Paper Venue
1 1391 Nagasankar P 09.08.2019
Aavishkaar 2019 Design and Fabrication of
Fresnel Lens Solar Air Heater
Veltech Hightech Dr.Rangarajan Dr.Sakunthala
Engineering College
2 1286 1291
Anbazhagan R
Suresh R 09.08.2019
Aavishkaar 2019 Design and Analysis of Single
Bellow Expansion
Veltech Hightech Dr.Rangarajan Dr.Sakunthala
Engineering College
3 815 1265
Karthick N, Arun A
09.08.2019
Aavishkaar 2019 Investigation of Surface
Roughness in ohns/en24 Alloy Steels
Veltech Hightech Dr.Rangarajan Dr.Sakunthala
Engineering College
4
815 1255 725 1011
Karthick N, Prakash E,
Dr.Gayathri N, Aravindh S
09.08.2019
Aavishkaar 2019 Cycle Time Reduction in
Tappet Clearance Setting Stage
Veltech Hightech Dr.Rangarajan Dr.Sakunthala
Engineering College
WORKSHOP
S.No HTS No.
Name Date Workshop Venue
1 1391 Nagasankar P 21.08.2019- 22.08.2019
Two Days National Workshop & hands on
training on Recent trends in 3D printing techniques applied to
Automobile &Aerospace application
S.A.Engineering College
PUBLICATION
S.No HTS No.
Name Title of the Conference and Paper
Journal name and publication
Year and month of Publication
1 1391 Nagasankar P
Neural
network – based leaf
classification using Machine learning
Concurrency and computation: Practice
and Experience John willey Publication
July 2019