Vehicle Technology Division - Yellow Tyreyellowtyre.lt/img/gr666_ece_r117.pdf · ·...

6

nieuwefr

Friso

Vehicle Technology Division

P.O. Box 777 Tel. + 31 (0)79 345 81 43 Vehicle Admission & Surveillance 2700 AT Zoetermeer E-mail [email protected] The Netherlands www.rdw.nl Tyres-road-noise-component R117-02 v5.01 Page 1 of 3

THE NETHERLANDS

(N E D E R L A N D)

COMMUNICATION

Concerning (1):

- approval granted - approval extended - approval refused - approval withdrawn - production definitely discontinued

of a type of tyre with regard to ‘rolling sound emission level’ and/or ‘adhesion performance on wet surfaces’ and/or ‘rolling resistance’ pursuant to Regulation number 117. Approval number: E4-117R-027070 S2R2 Extension number: 00

1. Manufacturer’s name and address(es) : Shandong Kaixuan Rubber Co., Ltd.

North of Yalujiang Road, East of Wutaishan Road, Economic and Technological Development Zone, Cao County, Shandong Province, 274400 P.R. China

2. If applicable, name and address of manufacturer’s representative

: not applicable

3. ‘Tyre class’ and ‘category of use’ of the type of tyre

: Class C1/ Class C2 / Class C3 normal / snow / snow tyre for use in severe snow conditions / special

4. Brand(s) name(s) and/or Trade description(s) of the type of tyre

: CONSTANCY; ILINK; GRENLANDER; AONAITE; RHINO; HITEC; MULTIRAC; TRANSKING; KINGRUN; BESTRICH; NAMA GR666; ECOSMART66; ECOSMART37; TT617; BSR617; RT666; HT666; MTR 66; NF43

nieuwefr

Friso

Approval number: E4-117R-027070 S2R2 Extension number: 00

Tyres-road-noise-component R117-02 v5.01 Page 2 of 3

5. Technical service and, where appropriate, test laboratory approved for purposes of approval or of verification of conformity tests

: TÜV Rheinland Kraftfahrt GmbH Technologiezentrum Verkehrssicherheit Typprüfstelle Fahrzeuge/Fahrzeugteile Am Grauen Stein D-51105 Köln (Poll)

6. Performance(s) approved

: sound level at (stage 1/stage 2) (1)(2), wet adhesion level, rolling resistance level(stage 1/stage 2) (1)(2) and snow performance level

6.1. Sound level of the representative tyre size, see Paragraph 2.5. of Regulation number 117, as per item 7. of the test report in appendix to Annex 3(2), at reference speed of 70/80 km/h (1).

: 385/65R22.5 160K: 73 dB(A)

6.2. Wet adhesion level of the representative tyre size, see Paragraph 2.5. of Regulation number 117, as per item 7. of the test report in the appendix to Annex 5: ... (G) using the vehicle or trailer method (1).

: ---

6.3. Rolling resistance level of the representative tyre size, see Paragraph 2.5. of Regulation number 117, as per item 7. of the test report in the appendix to Annex 6.(2)

: 385/65R22.5 160K: 4.704 N/kN

6.4. Snow performance of the representative tyre size, see Paragraph 2.5. of Regulation number 117, as per item 7. of the test report in the appendix to Annex 7.

: ---

7. Number of report issued by that service : 86-R117-1081/15-00

8. Date of report issued by that service : April 30, 2015

9. Reason(s) of extension (if applicable) : not applicable

10. Any remarks : ---

11. Place : Zoetermeer

12. Date :

13. Signature :

vellekoo

naam handtek stempel

nieuwefr

Getypte tekst

08-MAY-2015

Approval number: E4-117R-027070 S2R2 Extension number: 00

Tyres-road-noise-component R117-02 v5.01 Page 3 of 3

14. Annexed to this communication are: GR666-S2R2-00

14.1. A list of documents in the approval file deposited at the Administration services having

delivered the approval and which can be obtained upon request (3).

14.2. A list of tread-pattern designations: Specify for each trademark or brand name and trade description the list of tyre size designations, adding in case of Class C1 tyres the mark ‘reinforced’ (or ‘extra load’) or the speed symbol of snow tyres or in the case of tyres of Classes C2 and C3, the mark ‘traction’, if so required by paragraph 3.1. of this Regulation.

(1) Strike out what does not apply. (2) Note; See ‘Tyre size list’ in case the tyre performances are not all of the same stage level (Multi-stage tyre line). Stage level per tyre size is to be specified on the tyre size list. (3) In the case of ‘snow tyre for use in severe snow conditions’ a test report according to Appendix 2 of Annex 7 shall be submitted.

nieuwefr

Friso

Manufacturer: Shandong Kaixuan Rubber Co., Ltd.

Information folder: GR666-S2R2-00

Page 2 of 5

List of tyre size

Brand name(s) or Trade mark(s) : CONSTANCY; ILINK; GRENLANDER; AONAITE;

RHINO; HITEC; MULTIRAC; TRANSKING; KINGRUN;

BESTRICH; NAMA

Tread pattern : GR666; ECOSMART66; ECOSMART37; TT617; BSR617;

RT666; HT666; MTR 66; NF43

Tyre size Limit for rolling sound dB(A) of Stage II

Limit for wet grip index

Limit for rolling resistance coefficient

N/KN of Stage II

385/65R22.5 160K 73dB(A) n/a 6.5N/kN

Worst Case Selection

Test size for rolling sound : 385/65R22.5 160K

Because of : Widest

Test size for wet grip : n/a

Because of : n/a

Test size for rolling resistance : 385/65R22.5 160K

Because of : Lowest load capacity index

Test size for snow grip performance : n/a

Because of : n/a

nieuwefr

Friso



Page 3 of 5

Drawing of the tread pattern

(for measured tyre using for tyre noise)

Manufacturer name : Shandong Kaixuan Rubber Co., Ltd.

Pattern name : ECOSMART66

Tyre Size : 385/65R22.5 160K

Market : EU / US

Pitch number : 64

Pitch ratio : 1:1.18:1.47

Void volume [ % ] : 21.7%

Width: main grooves [mm] : 16

Depth: center groove [mm] : 15

Depth: shoulder groove [mm] : 15

Tyre tread pattern :

nieuwefr

Friso

nieuwefr

Friso



Page 4 of 5

Drawing of the tread pattern

(for measured tyre using for tyre rolling resistance test)

Manufacturer name : Shandong Kaixuan Rubber Co., Ltd.

Pattern name : ECOSMART66

Tyre Size : 385/65R22.5 160K

Market : EU / US

Pitch number : 64

Pitch ratio : 1:1.18:1.47

Void volume [ % ] : 21.7%

Width: main grooves [mm] : 16

Depth: center groove [mm] : 15

Depth: shoulder groove [mm] : 15

Tyre mass [kg] : 72.33

Tread depth [mm] : 15

Tread width [mm] : 284

Curvature radius of tread crown

[mm] : 700

Tyre outer diameter [mm] : 1072

Tread plies : 1 STEEL + 3 STEEL

Tyre tread pattern :

nieuwefr

Friso



Page 5 of 5

Drawing of the tyre sidewall

Tyre Size : 385/65R22.5 160K

Upper mold Lower mold

1. CONSTANCY 1.CONSTANCY

2. 385/65R22.5 2. 385/65R22.5

3. ECOSMART66 3. ECOSMART66

4. ALL STEEL RADIAL 4. ALL STEEL RADIAL

5. 20PR LAND RANCE J PLIES:TREAD 1+3 STEEL SIDEWALL 1 STEEL

MAX. LOAD SINGLE 4500kg (9920 LBS) AT 900kPa (130 PSI) COLD

5. 20PR LAND RANCE J PLIES:TREAD 1+3 STEEL SIDEWALL 1 STEEL

MAX. LOAD SINGLE 4500kg (9920 LBS) AT 900kPa (130 PSI) COLD

6. REGROOVABLE 6. REGROOVABLE

7. TUBELESS 7. TUBELESS

8. 160K 130PSI 8. 160K 130PSI

9. MADE IN CHINA 9. MADE IN CHINA

10. STANDARD RIM 1175 10. STANDARD RIM 1175

11. M+S E4 00******

12. DOT 6A** *** ****(****—DATE CODE)

1

TR

EA

D P

AT

TE

RN

NAM

E

3

5

9

2

4

6

7

10

1

TR

EA

D P

AT

TE

RN

NAM

E

3

5

9

2

4

6

7

11

12

10

nieuwefr

Friso

TÜV Rheinland Group

Test Report No.

86-R117-1081/15-00

Type : GR666; ECOSMART66; ECOSMART37; TT617; BSR617; RT666; HT666; MTR 66; NF43

Manufacturer : Shandong Kaixuan Rubber Co., Ltd.

Typprüfstelle Fahrzeuge/Fahrzeugteile TÜV Rheinland Kraftfahrt GmbH Am Grauen Stein, 51105 Cologne, Germany Designation: RDW-99050014-06

Engineering Centre Shanghai TÜV Rheinland (Shanghai) Co., Ltd. No. 177, 179, 189, Lane 777, West Guangzhong Road, Shanghai, P.R. China

Master_RDW_en_R13

Page 1 / 5

T E S T R E P O R T

according to UNECE-Regulation

Uniform Provisions concerning the Approval of Tyres with regard to Rolling Sound Emissions and to

Adhesion on Wet Surfaces and/or to Rolling Resistance

ECE-R117

including all amendments until

Amend.02, Suppl. 06

Approval Status

UNECE approval : E4-117R-027070 S2R2 Ext. 00

Structure of report :

Item No.

0. General information

1. Tested vehicle(s) / object(s)

2. Tested record

3. List of appendices

4. Statement of conformity

The Test Report shall be reproduced and published in full by the client only. It shall however be reproduced partially with the written permission of the Testing Laboratory only.

nieuwefr

Friso

nieuwefr

Friso


Test Report No.

86-R117-1081/15-00





Master_RDW_en_R13

Page 2 / 5

0. General information

0.1. Make (trade name of the manufacturer) : Shandong Kaixuan Rubber Co., Ltd.

0.2. Type : GR666; ECOSMART66; ECOSMART37; TT617; BSR617; RT666; HT666; MTR 66; NF43

0.3. Category of vehicle : Not applicable

0.4. Name and address of the manufacturer

: Shandong Kaixuan Rubber Co., Ltd. North of Yalujiang Road, East of Wutaishan Road, Economic and Technological Development Zone, Cao County, Shandong Province, 274400 P.R. China

0.5. No. of the information folder : GR666-S2R2-00 -Date of issue : April 29, 2015 -Date of last change : ---

1. Tested vehicle(s) / object(s)

1.1. Description

1.1.1. Vehicle / object

Commercial description : Not applicable

Type(s) / variant(s) / version(s) : GR666; ECOSMART66; ECOSMART37; TT617; BSR617; RT666; HT666; MTR 66; NF43

Identification number See Appendix 1

1.1.2. Condition of vehicle(s)/Object(s) : New / Used / Pretested

1.2. Worst case selection : The determination of worst case scenario was done according to QMA 1.301.005, section 6.2.2.2.

1.3. Remarks : All versions of the types as stated in the information folder are covered by the tested object(s) respectively.

nieuwefr

Friso

nieuwefr

Friso


Test Report No.

86-R117-1081/15-00





Master_RDW_en_R13

Page 3 / 5

2. Tested record

2.1. Equipment for measuring and testing : The test facilities / measurement equipment used were in compliance with the test requirements.

2.1.1. Specifications for the test site : See Appendix 1

2.1.2. Subcontracting

- Tyre noise : RDW-117R-0030505

- Wet grip : Not applicable

- Rolling resistance : Not applicable

- Snow performance : Not applicable

2.2. Test results : See appendix 1

according to Paragraph 6. of the UNECE-R117

2.2.1. Test results refering to measurements : Pass / Fail

2.2.2. Attributive tests : Not applicable

2.2.3. Alternative test provisions : Not applicable

Remarks concerning extension : The type has been tested according to the modification(s) mentioned in appendix 0.

The new parts meet the requirements of the regulation.

An actual practical test of the type was not necessary. The results of the previous test(s) are still valid.

2.3. Additional information : The results of the test refer exclusively to the object(s) mentioned under point 1. of this report.

Test site : See Appendix 1

Test date : See Appendix 1

2.4. Remarks : Not applicable

nieuwefr

Friso

nieuwefr

Friso


Test Report No.

86-R117-1081/15-00





Master_RDW_en_R13

Page 4 / 5

3. List of Appendices

Appendix 0 : List of modifications

Appendix 1 : Test minutes

4. Statement of conformity

The in point 0.5. mentioned information folder and the type described in that comply with the requirements mentioned on page 1.

With regard to the required level of performance to be achieved, the tested items were representative for the type to be approved (see point 1.2).

The mentioned test results refer to the vehicle(s)/object(s) described under point 1.1. of this report.

Engineering centre Shanghai / April 30, 2015 SR

Su Rui Expert Technical Service

nieuwefr

Friso


Test Report No.

86-R117-1081/15-00





Master_RDW_en_R13

Page 5 / 5

List of modifications

Appendix 0

Correction of

:

---

Modification of :

---

Addition of :

---

Deletion of :

---

nieuwefr

Friso


Test Report No.

86-R117-1081/15-00





Master_RDW_en_R13

Page 1 / 4

Appendix 1

Test minutes

Appendix 1

1. Tyre noise measurements

1.1. Date of test : April 04, 2015

1.2. Test vehicle

Make and vehicle name : DAF CF75 2002 Mudguards removed

Wheelbase : 4520 mm(<5000mm for C2 & C3)

1.3. Location of test track : RDW Test Centre - Lelystad

Date of track certification to ISO10844:1994

: May 29, 2006 / May 05, 2015

Issued by : BAW Wegen BV / RDW-TCL

Method of certification : Residual void content; Texture depth, volumetric method

1.4. Test tyre details

Tyre brand and trade description : CONSTANCY / GR666

Tyre type : 385/65R22.5 160K

Tyre structure : Radial

Category of use : Snow

State whether the tyre is : Standard / Reinforced

Manufacturing date code : 6AKW B03 0515

1.5. Test data

Reference load : 4500 kg

Reference inflation pressure : 900 kPa

Reference speed : 70 / 80 km/h

Front left Front right Rear left Rear right Qt, avg

Test mass (kg) 2850(A) 2850(A) 3620 3530 3575.0(B)

Tyre load index (%) 71.3% 71.3% 80.4% 78.4% 79.3(B)

Inflation pressure (cold) (kPa)

600 600 730 730 /

(A) The front axle if fitted with grooveless tyres

Size : 315/80R22.5

Load index and speed symbol : 156/150L

Reference pressure : 123 PSI

nieuwefr

Friso


Test Report No.

86-R117-1081/15-00





Master_RDW_en_R13

Page 2 / 4

Appendix 1

(B) Concern the rear axle only

Test rim width code : 11.75 x 22.5

Temperature measurement sensor type

: YSI Super Stable Thermister (YSI 401)

Valid Test results* :

Running No.

Speed km/h

Direction of run

Sound Level Measured

dB(A)

Air

Temp.

°C

Track

Temp.

°C

Sound Level

Measured dB(A)

Comments Left Right Left Temp.

correction Right Temp.

correction

1 60.5 E to NE 72.2 72.1 5.7 19.8 --- --- ---

2 63.6 E to NE 73.0 72.5 5.9 19.8 --- --- ---

3 65.7 E to NE 73.3 73.2 5.7 19.8 --- --- ---

4 68.6 E to NE 74.0 73.6 5.7 20.0 --- --- ---

5 71.3 E to NE 75.3 74.7 5.7 20.0 --- --- ---

6 74.7 E to NE 76.8 76.4 5.8 20.1 --- --- ---

7 77.2 E to NE 77.3 77.5 5.8 20.1 --- --- ---

8 79.3 E to NE 78.3 77.7 5.9 20.4 --- --- --- Limit value

60~80 --- --- --- 5 ~ 40 5 ~ 50 --- --- ---

*The test data of the tyre noise test refer exclusively to the report No. RDW-117R-0030505

Regression line slope : 52.69

Sound level after temperature correction according to paragraph 4.3. of annex 3

: 74.9 dB(A)

Final result according to paragraph 4.4. and 4.5. of annex 3 : 73 dB(A)

Limit Value for C3 (Stage I / II) : 73 dB(A)

2. Tyre wet grip measurements : Not applicable

nieuwefr

Friso


Test Report No.

86-R117-1081/15-00





Master_RDW_en_R13

Page 3 / 4

Appendix 1

3. Rolling resistance measurements

3.1. Date of test : April 17, 2015

3.2. Test site : Technical Center for Inspection & Quarantine of SDCIQ #53, Beijing Road, Qingdao Free Trade Area Shandong Province, 266113 P.R. China

3.3. Test machine information

Make / type : MTS / RW860

Applicable test method : Force method

Diameter (≥1.7m) : 1.708 m

Surface : Smooth steel / textured surface

Test machine alignment with : Bridgestone T.C.E.S.P.A.

Alignment valid from : January 09, 2015

Latest test machine monitoring on

: February, 2015

Measurement standard deviation σm in latest monitoring

: σm= 0.0136 N/kN (σm≤0.06 N/kN for Class C3 tyres)

3.4. Test tyre details

Tyre brand and trade description : CONTANCY / GR666

Tyre type : 385/65R22.5 160K

Tyre structure : Radial

Category of use : Snow

Plies fo tread and sidewall : 1+3 STEEL / 1 STEEL

State whether the tyre is : Standard / Reinforced

Manufacturing date code : 1515

3.5. Test conditions

Test rim size / material : 11.75 ×22.5 / Aluminium alloy

Test speed : 80 km/h

Test load (85% of maximum load capacity)

: 37510.4 N

Inflation pressure : 900 kPa

Thermal conditioning : more than 6 hours

nieuwefr

Friso

nieuwefr

Friso


Test Report No.

86-R117-1081/15-00





Master_RDW_en_R13

Page 4 / 4

Appendix 1

Warm-up : Forward rotation Reverse rotation

180 minutes 50 minutes 3.6. Measurement and recording

The initial test inflation pressure : 900 kPa

Forward rotation Reverse rotation

The test speed, Un : 80.00 km/h -80.15 km/h

The ambient temperature, tamb : 25.35 °C 26.39 °C

The load on the tyre normal to the drum surface, Lm

: 37509.8 N 37511.0 N

Spindle force (formal test mode) : -95.165 N -143.030 N

The distance from the tyre axis to the drum outer surface under steady-state conditions, rL(formal test mode)

: 499.910 mm 499.955 mm

Skim test load : 402.3 N 401.6 N

Spindle force (skim test mode) : 0.165 N -10.289 N

The distance from the tyre axis to the drum outer surface under steady-state conditions(skim test mode)

: 531.951 mm 532.002 mm

3.7. Rolling resistance result

Initial value (or average in the case of more than 1)

: 4.815 N/kN

Temperature corrected : 4.842 N/kN

Temperature and drum diameter corrected

: 4.704 N/kN

Limit value for C3 (Stage I / II) : 6.5 N/kN

The test result corrected by alignment equation mentioned in paragragh 6 of Annex Iva of Regulation (EC) No. 1222/2009 is: n/a, Energy Efficiency Class: n/a

4. Snow performance

measurements : Not applicable

nieuwefr

Friso

nieuwefr

Friso

Vehicle Technology Division - Yellow Tyreyellowtyre.lt/img/gr666_ece_r117.pdf · ·...

Documents

Transcript of Vehicle Technology Division - Yellow Tyreyellowtyre.lt/img/gr666_ece_r117.pdf · ·...