Vega, 20’ x 20’ Kit Size

Each Orbital Truss Extreme kit has been carefully designed and developed to be stable and safe. Consult with your dealer for load bearing specifi cations. The manufacturers of Orbital Expo Truss Extreme will not be held responsible or accountable for damage or injury caused by exceeding guidelines or though wrongful/incorrect use of the system. NOTE: S = Brushed Silver Finish, WD = American Natural Wood Finish.Kits will come with choice of lights except for Lumina 2.

Thank you for your purchase of Orbital Expo Truss Extreme. These instructions show how erect the kit you purchased. The color coded section will help identify the location of each part.

6-WAY JUNCTIONBOX (OR-J-2)

24" LONGTRUSS SECTION

(OR-24-2)

36" LONGTRUSS SECTION

(OR-36-2)

46" LONGTRUSS SECTION

(OR-46-2)

90 CURVED TRUSS SECTION

(OR-90-CV-2)

UNIVERSAL CONNECTOR

(OR-UNI-CLP-1)

45 CURVED TRUSS SECTION

(OR-45-CV-2)

SPOTLIGHT(CHOICE OF LIGHTS)

TRUSS TO TRUSSCONNECTION KIT

(OR-QL-T2T)

TRUSS TO JUNCTIONCONNECTION KIT

(OR-QL-T2J)

ADJUSTABLETABLE TOP

(OR-TBL-S/WD*)

INTERNAL SHELVES

(OR-IS-36-S/WD*)

(OR-IS-46-S/WD*)

(OR-IS-24-S/WD*)24”

36”

46”

ORBITAL FREIGHTCASE (OCF)

ORBITAL FREIGHTCASE (OCT)

ADJUSTABLESCALLOP

TABLE TOP

RIGHTLEFT

(OR-TBL2-R-S/WD*)

(OR-TBL2-L-S/WD*)

28

0

16

16

0

20

0

5

0

8

83

150

1

2

0

0

0

IMPORTANT INFORMATION REGARDING GRAPHIC FILES: Each graphic has a specifi c code or number located on the graphic. The electronic print ready fi les provided must be named accordingly. Using this coding system will allow us to prefl ight and prepare your fi les for print more effi ciently. If you fail to provide your graphic fi les in this format, additional charges may be necessary to complete your printed materials.

Vega, 20’ x 20’ Kit Size

A

B

IMPORTANT INFORMATION REGARDING GRAPHIC FILES: Each graphic has a specifi c code or number located on the graphic. The electronic print ready fi les provided must be named accordingly. Using this coding system will allow us to prefl ight and prepare your fi les for print more effi ciently. If you fail to provide your graphic fi les in this format, additional charges may be necessary to complete your printed materials.

Acceptable File Formats:Illustrator CS3 or belowPhotoshop CS3 or below

Art time will be charged if fi les need to be fi xed or altered to meet guidelines. When sending fi les please be sure to include all support art (fonts, linked images, etc.)

Font Specifi cations:Fonts must be converted to outlines.

Color:All fi les are printed as CMYK format. All critical Pantone colors need to be called out in the fi le or specifi ed on the order as Coated or Uncoated swatches.

Resolution:All raster fi les (either print fi les or linked fi les) must be at 100-120 pixels per inch at 100%.

Finishing Details:When graphics are notched, a 7/8” square is cut in the appropriate location

FS: Graphics mounted to front ofthe truss systemBS: Graphics mounted to back ofthe truss system

Dye Sublimation graphics are attached to truss with velcro. Inkjet & UV panels are attached to truss with magnet.

Bleeds: All orbital truss graphics require specifi c bleeds. The sizes listed above represent the fi nished graphic size. Please keep all logos, type, and critical information at least 1” in from each edge of the fi nished graphic.

Dye Sublimation: 2” bleed around the perimeter.

Inkjet & UV: 1/2” bleed around the perimeter.

Vega, 20’ x 20’ Kit Size

Available Graphics:Dye-sublimation,or

Inkjet Graphics Only

OR-G-VG3-A

OR-G-VG4-A

OR-G-VG2-A

OR-G-VG1-A

OR-G-VG5-A OR-G-VG6-A

OR-G-VG8-AOR-G-VG7-AOR-G-VG7-A

Notched ontop rightcorner

FSFSFSFS BS

BS

BS

BS

OR-G-VG4-AOR-G-VG3-AOR-G-VG2-AOR-G-VG1-A OR-G-VG5-A

OR-G-VG7-A

OR-G-VG6-A

OR-G-VG8-A

39.5"

83.7

5"

49" 39.5" 49"

37.7

5"

39.5" 39.5"

IMPORTANT INFORMATION REGARDING GRAPHIC FILES: Each graphic has a specifi c code or number located on the graphic. The electronic print ready fi les provided must be named accordingly. Using this coding system will allow us to prefl ight and prepare your fi les for print more effi ciently. If you fail to provide your graphic fi les in this format, additional charges may be necessary to complete your printed materials.

Acceptable File Formats:Illustrator CS3 or belowPhotoshop CS3 or below

Art time will be charged if fi les need to be fi xed or altered to meet guidelines. When sending fi les please be sure to include all support art (fonts, linked images, etc.)

Font Specifi cations:Fonts must be converted to outlines.

Color:All fi les are printed as CMYK format. All critical Pantone colors need to be called out in the fi le or specifi ed on the order as Coated or Uncoated swatches.

Resolution:All raster fi les (either print fi les or linked fi les) must be at 100-120 pixels per inch at 100%.

Finishing Details:When graphics are notched, a 7/8” square is cut in the appropriate location

FS: Graphics mounted to front ofthe truss systemBS: Graphics mounted to back ofthe truss system

Dye Sublimation graphics are attached to truss with velcro. Inkjet & UV panels are attached to truss with magnet.

Bleeds: All orbital truss graphics require specifi c bleeds. The sizes listed above represent the fi nished graphic size. Please keep all logos, type, and critical information at least 1” in from each edge of the fi nished graphic.

Dye Sublimation: 2” bleed around the perimeter.

Inkjet & UV: 1/2” bleed around the perimeter.

Vega, 20’ x 20’ Kit Size

Available Graphics:Dye-sublimation,or

Inkjet Graphics Only

OR-G-VG3-B

OR-G-VG4-B

OR-G-VG5-BOR-G-VG6-B

OR-G-VG8-BOR-G-VG7-B

OR-G-VG1-B

OR-G-VG2-B

Notched ontop leftcorner

FS FS FS FSBS

BS

BS

BS

OR-G-VG6-B

OR-G-VG8-B

OR-G-VG5-B

OR-G-VG7-B

OR-G-VG4-B OR-G-VG3-B OR-G-VG2-B OR-G-VG1-B

39.5"

83.7

5"

49"39.5"49"

37.7

5"

39.5"39.5"

Vega, 20’ x 20’ Kit Size

Vega, 20’ x 20’ Kit Size

Vega, 20’ x 20’ Kit Size

Vega, 20’ x 20’ Kit Size