VECTORS AND SCALARS A scalar quantity has only magnitude and is completely specified by a number and...

54
VECTORS AND SCALARS A scalar quantity has only magnitude and is completely specified by a number and a unit. Examples are mass (a stone has a mass of 2 kg), volume (1.5 L), and frequency (60 Hz). Scalar quantities of the same kind are added by using ordinary arithmetic.

Transcript of VECTORS AND SCALARS A scalar quantity has only magnitude and is completely specified by a number and...

Page 1: VECTORS AND SCALARS A scalar quantity has only magnitude and is completely specified by a number and a unit. Examples are mass (a stone has a mass of 2.

VECTORS AND SCALARS A scalar quantity has only magnitude and is completely specified by a number and a unit. Examples are mass (a stone has a mass of 2 kg), volume (1.5 L), and frequency (60 Hz). Scalar quantities of the same kind are added by using ordinary arithmetic.

Page 2: VECTORS AND SCALARS A scalar quantity has only magnitude and is completely specified by a number and a unit. Examples are mass (a stone has a mass of 2.

A vector quantity has both magnitude and direction. Examples are displacement (an airplane has flown 200 km to the southwest), velocity (a car is moving at 60 km/h to the north), and force (a person applies an upward force of 25 N to a package). When vector quantities are added, their directions must be taken into account.

Page 3: VECTORS AND SCALARS A scalar quantity has only magnitude and is completely specified by a number and a unit. Examples are mass (a stone has a mass of 2.

A vector is represented by an arrowed line whose length is proportional to the vector quantity and whose direction indicates the direction of the vector quantity.

Page 4: VECTORS AND SCALARS A scalar quantity has only magnitude and is completely specified by a number and a unit. Examples are mass (a stone has a mass of 2.

The resultant, or sum, of a number of vectors of a particular type (force vectors, for example) is that single vector that would have the same effect as all the original vectors taken together.

Page 5: VECTORS AND SCALARS A scalar quantity has only magnitude and is completely specified by a number and a unit. Examples are mass (a stone has a mass of 2.

GRAPHICAL ADDITION OF VECTORS PARALLELOGRAM METHOD

The resultant of two vectors acting at any angle may be represented by the diagonal of a parallelogram. The two vectors are drawn as the sides of the parallelogram and the resultant is its diagonal. The direction of the resultant is away from the origin of the two vectors.

Page 6: VECTORS AND SCALARS A scalar quantity has only magnitude and is completely specified by a number and a unit. Examples are mass (a stone has a mass of 2.
Page 7: VECTORS AND SCALARS A scalar quantity has only magnitude and is completely specified by a number and a unit. Examples are mass (a stone has a mass of 2.

3.1 Find the magnitude and direction of the resultant force produced by a vertically upward force of 40 N and a left horizontal force of 30 N.

A (40 N, up) B (30 N, left)

Scale: 1 cm = 10 N     

 

R (50 N, 127) A

B

R

Page 8: VECTORS AND SCALARS A scalar quantity has only magnitude and is completely specified by a number and a unit. Examples are mass (a stone has a mass of 2.

3.2 Using the graphical method, find the resultant of the following two displacements: A (2.0 m, 40) B (4.0 m, 127)

       

 

A

B

R (4.5 m, 101)

R

Scale 1 cm = 1 m

Page 9: VECTORS AND SCALARS A scalar quantity has only magnitude and is completely specified by a number and a unit. Examples are mass (a stone has a mass of 2.

POLYGON or TIP-TO-TAIL METHOD This method for finding the resultant R of several vectors (A, B, C) consists in beginning at any convenient point and drawing (to scale in the proper directions) each vector arrow in turn.

They may be taken in any order of succession A + B + C = C + A + B.

The tail of each arrow is positioned at the head of the preceding one.

Page 10: VECTORS AND SCALARS A scalar quantity has only magnitude and is completely specified by a number and a unit. Examples are mass (a stone has a mass of 2.

The resultant is represented by an arrowwith its tail end at the starting point andits head at the tip of the last vector added.The size or magnitude of R is given by:

R = R

Page 11: VECTORS AND SCALARS A scalar quantity has only magnitude and is completely specified by a number and a unit. Examples are mass (a stone has a mass of 2.
Page 12: VECTORS AND SCALARS A scalar quantity has only magnitude and is completely specified by a number and a unit. Examples are mass (a stone has a mass of 2.

PARALLELOGRAM METHOD

TIP-TO-TAIL METHOD

Page 13: VECTORS AND SCALARS A scalar quantity has only magnitude and is completely specified by a number and a unit. Examples are mass (a stone has a mass of 2.

0

90

180

270

360

Page 14: VECTORS AND SCALARS A scalar quantity has only magnitude and is completely specified by a number and a unit. Examples are mass (a stone has a mass of 2.

3.3 Add the following two forces by use of the tip-to-tail method: A (30 N at 30) B (20 N at 140) Scale: 1 cm = 10 N

     

  A

B

R (30 N, 72)

R

The resultant is drawn from tail end at the starting point to the head of the last vector added.

Page 15: VECTORS AND SCALARS A scalar quantity has only magnitude and is completely specified by a number and a unit. Examples are mass (a stone has a mass of 2.

3.4 Three ropes are tied to a stake. Find the resultant force. A (20 N, 0)B (30 N, 150) C (40 N, 230)

      

A

BC

Scale: 1 cm = 10 N

R (35 N, 206)

R

Page 16: VECTORS AND SCALARS A scalar quantity has only magnitude and is completely specified by a number and a unit. Examples are mass (a stone has a mass of 2.

VECTOR COMPONENTS A component of a vector is its effective value in a given direction.

For example, the x-component of a displacement is the displacement parallel to the x-axis caused by the given displacement.

A vector in two dimensions may be resolved into two component vectors acting along any two mutually perpendicular directions.

Rx = R cos Ry = R sin

Page 17: VECTORS AND SCALARS A scalar quantity has only magnitude and is completely specified by a number and a unit. Examples are mass (a stone has a mass of 2.
Page 18: VECTORS AND SCALARS A scalar quantity has only magnitude and is completely specified by a number and a unit. Examples are mass (a stone has a mass of 2.

3.5 Find the components of the vector: F (250 N, 235o)

Fx = F cos = 250 cos (235o)= - 143.4 N

Fy = F sin = 250 sin (235o)= - 204.7 N

Fx

Fy

Page 19: VECTORS AND SCALARS A scalar quantity has only magnitude and is completely specified by a number and a unit. Examples are mass (a stone has a mass of 2.

VECTOR ADDITION: COMPONENT METHOD To add two or more vectors A, B, C,… by the component method, follow this procedure: 1. Resolve the initial vectors into components x and y. 2. Add the components in the x direction to give Rx and add the

components in the y direction to give Ry . That is, the magnitudes of Rx

and Ry are given by, respectively:Rx = Ax + Bx + Cx…

Ry = Ay + By + Cy…

 3. Calculate the magnitude and direction of the resultant R from its components by using the Pythagorean theorem:

and

R R Rx y 2 2

tan 1R

Ry

x

Page 20: VECTORS AND SCALARS A scalar quantity has only magnitude and is completely specified by a number and a unit. Examples are mass (a stone has a mass of 2.
Page 21: VECTORS AND SCALARS A scalar quantity has only magnitude and is completely specified by a number and a unit. Examples are mass (a stone has a mass of 2.
Page 22: VECTORS AND SCALARS A scalar quantity has only magnitude and is completely specified by a number and a unit. Examples are mass (a stone has a mass of 2.
Page 23: VECTORS AND SCALARS A scalar quantity has only magnitude and is completely specified by a number and a unit. Examples are mass (a stone has a mass of 2.

3.6 Four coplanar forces act on a body at point O as shown in the figure. Find their resultant graphically.

A (80 N, 0)B (100 N, 45) C (110 N, 150)D (160 N, 200) Scale: 1 cm = 20 N

 

A

B

CD

R (119 N, 143)

R

Page 24: VECTORS AND SCALARS A scalar quantity has only magnitude and is completely specified by a number and a unit. Examples are mass (a stone has a mass of 2.

3.7 Solve problem 3.6 by use of the component method.

A (80 N, 0) B (100 N, 45) C (110 N, 150) D (160 N, 200)

x-component y-component80 cos 0 80 sin 0100 cos 45 100 sin 45110 cos 150 110 sin 150160 cos 200 160 sin 200 Σx = -95 N Σy = 71 N

22 )71()95( R = 118.6 N

Page 25: VECTORS AND SCALARS A scalar quantity has only magnitude and is completely specified by a number and a unit. Examples are mass (a stone has a mass of 2.

95

71tan 1 = 36.7

Since Σx = (-) and Σy = (+) R is in the III Quadrant, therefore:

180 - 36.7= 143.3

R (118.6 N, 143.3)

Page 26: VECTORS AND SCALARS A scalar quantity has only magnitude and is completely specified by a number and a unit. Examples are mass (a stone has a mass of 2.

3.8 The five coplanar forces shown in the figure act on an object. Find their resultant with the component method.

A (19 N, 0)B (15 N, 60) C (16 N, 135)D (11 N, 210)E (22 N, 270)

x-component y-component19 cos 0 19 sin 015 cos 60 15 sin 6016 cos 135 16 sin 13511 cos 210 11 sin 21022 cos 270 22 sin 270 Σx = 5.7 N Σy = -3.2 N

Page 27: VECTORS AND SCALARS A scalar quantity has only magnitude and is completely specified by a number and a unit. Examples are mass (a stone has a mass of 2.

22 )2.3()7.5( R = 6.5 N

7.5

2.3tan 1 = 29

Since Σx = (+) and Σy = (-) R is in the IV Quadrant, therefore:

360 - 29= 331

R (6.5 N, 331)

Page 28: VECTORS AND SCALARS A scalar quantity has only magnitude and is completely specified by a number and a unit. Examples are mass (a stone has a mass of 2.

3.9 A force of 100 N makes an angle with the x-axis and has a y-component of 30 N. Find both the x-component and the angle .

A (100 N, )Ay = 30 N

   

AAy

100

30sin 1

= 17.5 Ax = A cos = 100 cos 17.5

= 95 N

Page 29: VECTORS AND SCALARS A scalar quantity has only magnitude and is completely specified by a number and a unit. Examples are mass (a stone has a mass of 2.

3.10 A child pulls on a rope attached to a sled with a force of 60 N. The rope is at 40 with respect to the ground.a. Calculate the effective value of the pull tending to move the sled along the ground.

b. Calculate the force tending to lift the sled vertically.

F = 60 Nθ = 40

Fx = F cos = 60 cos 40 = 46 N

Fy = F sin = 60 sin 40

= 39 N

Page 30: VECTORS AND SCALARS A scalar quantity has only magnitude and is completely specified by a number and a unit. Examples are mass (a stone has a mass of 2.

3.11 A plane is traveling eastward at a speed of 500 km/h. A 90 km/h wind is blowing southward. What are the direction and speed of the plane relative to the ground?

A (500 km/h, E)B (90 km/h, S)

22 )90()500( v = 508 km/h

500

90tan 1 = 10

360 - 10 = 350

R (508 km/h, 350)

Page 31: VECTORS AND SCALARS A scalar quantity has only magnitude and is completely specified by a number and a unit. Examples are mass (a stone has a mass of 2.

PROJECTILE MOTIONAn object launched into space without motive power of its own is called a projectile. If we neglect air resistance, the only force acting on a projectile is its weight, which causes its path to deviate from a straight line. The projectile has a constant horizontal velocity and a vertical velocity that changes uniformly under the influence of gravity.

Page 32: VECTORS AND SCALARS A scalar quantity has only magnitude and is completely specified by a number and a unit. Examples are mass (a stone has a mass of 2.

THE MONKEY AND THE ZOOKEPER

The monkey spends most of its day hanging from a branch of a tree. The zookeeper feeds the monkey by shooting bananas from a banana cannon to the monkey in the tree. The monkey usually drops from the tree the moment that the banana leaves the muzzle of the cannon. The zookeeper is faced with the dilemma of where to aim the banana cannon in order to feed the monkey. If the monkey lets go of the tree the moment that the banana is fired, then where should he aim the banana cannon?

http://www.fisica.uniud.it/~deangeli/applets/Multimedia/ExplrSci/dswmedia/monkey.htm

Page 33: VECTORS AND SCALARS A scalar quantity has only magnitude and is completely specified by a number and a unit. Examples are mass (a stone has a mass of 2.
Page 34: VECTORS AND SCALARS A scalar quantity has only magnitude and is completely specified by a number and a unit. Examples are mass (a stone has a mass of 2.

HORIZONTAL PROJECTION If an object is projected horizontally, its motion can best be described by considering its horizontal and vertical motion separately. In the figure we can see that the vertical velocity and position increase with time as those of a free-falling body. Note that the horizontal distance increases linearly with time, indicating a constant horizontal velocity.

Page 35: VECTORS AND SCALARS A scalar quantity has only magnitude and is completely specified by a number and a unit. Examples are mass (a stone has a mass of 2.
Page 36: VECTORS AND SCALARS A scalar quantity has only magnitude and is completely specified by a number and a unit. Examples are mass (a stone has a mass of 2.

3.14 A stunt flier is moving at 15 m/s parallel to the flat ground 100 m below. How large must the distance x from the plane from the target be if a sack of flour released from the plane is to strike the target?

vx = 15 m/s

y = 100 mvy = 0

y = ½ gt2

g

yt

2

8.9

)100(2 = 4.52 s

x = vx t

= 15(4.52)= 67.8 m

Page 37: VECTORS AND SCALARS A scalar quantity has only magnitude and is completely specified by a number and a unit. Examples are mass (a stone has a mass of 2.

3.15 A person standing on a cliff throws a stone with a horizontal velocity of 15.0 m/s and the stone hits the ground 47 m from the base of the cliff. How high is the cliff?

vx = 15 m/s

x = 47 mvy = 0

xv

xt

15

47 = 3.13 s

y = ½ gt2

= ½ (9.8)(3.13)2

= 48 m

Page 38: VECTORS AND SCALARS A scalar quantity has only magnitude and is completely specified by a number and a unit. Examples are mass (a stone has a mass of 2.

3.16 A cannonball is projected horizontally with an initial velocity of 120 m/s from the top of a cliff 250 m above a lake.a. In what time will it strike the water at the foot of the cliff?

b. What is the x-distance (range) from the foot of the cliff to the point of impact in the lake?

vx = 120 m/s

y = 250 mvy = 0 g

yt

2

8.9

)250(2 = 7.14 s

x = vx t

= 120(7.14)= 857 m

Page 39: VECTORS AND SCALARS A scalar quantity has only magnitude and is completely specified by a number and a unit. Examples are mass (a stone has a mass of 2.

c. What are the horizontal and vertical components of its final velocity?

d. What is the final velocity at the point of impact and its direction?

vx = 120 m/s

vy = voy + gt

= 9.8(7.14)= 70 m/s

22yxR vvv 22 )70()120(

120

70tan 1

= 139 m/s

= 30.2 below horizontal

v (139 m/s, 30.2)

Page 40: VECTORS AND SCALARS A scalar quantity has only magnitude and is completely specified by a number and a unit. Examples are mass (a stone has a mass of 2.

PROJECTILE MOTION AT AN ANGLEThe more general case of projectile motion occurs when the projectile is fired at an angle.

Page 41: VECTORS AND SCALARS A scalar quantity has only magnitude and is completely specified by a number and a unit. Examples are mass (a stone has a mass of 2.

Problem solution: 1. Upward direction is positive. Acceleration (g) is downward thus negative. 2. Resolve the initial velocity vo into its x and y components:

and  3. The horizontal and vertical components of its position at any instant is given by: and  4. The horizontal and vertical components of its velocity at any instant are given by:

and 5. The final position and velocity can then be obtained from their components.

v vx0 0 cos v vy0 0 sin

x v tx 0 y v t gty 01

22

v vx x 0 v v gty y 0

Page 42: VECTORS AND SCALARS A scalar quantity has only magnitude and is completely specified by a number and a unit. Examples are mass (a stone has a mass of 2.

3.17 A ball is thrown from the top of one building toward a tall building 50 m away. The initial velocity of the ball is 20 m/s at 40. How far above or below its original level will the ball strike the opposite wall?

x = 50 m vo = 20 m/s, 40g = - 9.8 m/s2

vox = 20 cos 40= 15.3 m/svoy = 20 sin 40= 12.9 m/s

xv

xt

3.15

50 = 3.27 s

y = voy t + ½ gt2

= 12.9(3.27) + ½ (-9.8)(3.27)2

= - 10.2 m or 10.2 m below its original level

Page 43: VECTORS AND SCALARS A scalar quantity has only magnitude and is completely specified by a number and a unit. Examples are mass (a stone has a mass of 2.

3.18 An artillery shell is fired with an initial velocity of 100 m/s at an angle of 30 above the horizontal. Find:a. Its position and velocity after 8 s

vo = 100 m/s, 40t = 8 sg = - 9.8 m/s2

vox = 100 cos 30 = 86.6 m/svoy = 100 sin 30 = 50 m/s

x = vox t

= 86.6(8) = 692.8 my = voy t + ½ gt2

= 50(8) + ½ (-9.8)(8)2

= 86.4 m

vx = vox = 86.6 m/s

vy = voy + gt

= 50 + (-9.8)(8) = - 28.4 m/s

Page 44: VECTORS AND SCALARS A scalar quantity has only magnitude and is completely specified by a number and a unit. Examples are mass (a stone has a mass of 2.

b. The time required to reach its maximum height

At top vy = 0 vy = voy + gt

g

vt oy

8.9

50

= 5.1 s

c. The horizontal range R

Total time T = 2t= 2(5.1)= 10.2 s

x = vox t

= 86.6(10.2)= 883.7 m

Page 45: VECTORS AND SCALARS A scalar quantity has only magnitude and is completely specified by a number and a unit. Examples are mass (a stone has a mass of 2.

3.19 A baseball is thrown with an initial velocity of 120 m/s at an angle of 40above the horizontal. How far from the throwing point will the baseball attain its original level?

vo = 120 m/s, 40g = - 9.8 m/s2

vox = 120 cos 40 = 91.9 m/svoy = 120 sin 40 = 77.1 m/s

At top vy = 0

g

vt oy

8.9

1.77

= 7.9 s

x = vox (2t)

= 91.9(2)(7.9) = 1452 m

Page 46: VECTORS AND SCALARS A scalar quantity has only magnitude and is completely specified by a number and a unit. Examples are mass (a stone has a mass of 2.

3.20 a. Find the range of a gun which fires a shell with muzzle velocity v at an angle . What is the maximum range possible?

At top vy = 0

vy = voy + gt

= vo sin θ - gt

g

vt o sin

Total time = 2t

g

vv oo

sin2cos

)cos(sin2 2

g

vx o

x = vxt

Page 47: VECTORS AND SCALARS A scalar quantity has only magnitude and is completely specified by a number and a unit. Examples are mass (a stone has a mass of 2.

sin θcos θ= ½ sin 2θ

2sin2

g

vx o

)cos(sin2 2

g

vx o

Maximum range is 45 since 2θ = 90

Page 48: VECTORS AND SCALARS A scalar quantity has only magnitude and is completely specified by a number and a unit. Examples are mass (a stone has a mass of 2.
Page 49: VECTORS AND SCALARS A scalar quantity has only magnitude and is completely specified by a number and a unit. Examples are mass (a stone has a mass of 2.
Page 50: VECTORS AND SCALARS A scalar quantity has only magnitude and is completely specified by a number and a unit. Examples are mass (a stone has a mass of 2.

b. Find the angle of elevation of a gun that fires a shell with muzzle velocity of 120 m/s and hits a target on the same level but 1300 m distant.

vo = 120 m/s

x = 1300 m

22sin

ov

gx 2)120(

)1300(8.9

2sin2

g

vx o

= 0.885

sin-1(2θ)= 62θ = 31

Page 51: VECTORS AND SCALARS A scalar quantity has only magnitude and is completely specified by a number and a unit. Examples are mass (a stone has a mass of 2.

RELATIVE VELOCITY

Velocity measurements differ in different frames of reference. If the frame of reference is denoted with subscripts (vab is the velocity of a with respect to b), then the velocity of an

object with respect to a different frame of reference can be found by adding the known velocities. 

vab = vac + vcb

Page 52: VECTORS AND SCALARS A scalar quantity has only magnitude and is completely specified by a number and a unit. Examples are mass (a stone has a mass of 2.
Page 53: VECTORS AND SCALARS A scalar quantity has only magnitude and is completely specified by a number and a unit. Examples are mass (a stone has a mass of 2.

3.12 The world’s fastest current is in Slingsby Channel, Canada, where the speed of the water reaches 30.0 km/h. Suppose a motorboat crosses the channel perpendicular to the bank at a speed of 18.0 km/h relative to the bank. Find the velocity of the motorboat relative to the water.

vwb = 30.0 km/h

vmb = 18.0 km/h

vmw = vmb

vwb

vmw

22wbmbmw vvv 22 )30()18( = 35 km/h

18

30tan 1 = 59 180 - 59 = 121

= R (508 km/h, 350)

Page 54: VECTORS AND SCALARS A scalar quantity has only magnitude and is completely specified by a number and a unit. Examples are mass (a stone has a mass of 2.

3.13 A polar bear swims 2.60 m/s south relative to the water. The bear is swimming against a current that moves 0.78 m/s at an angle of 40.0° north of west, relative to Earth. How long will it take the polar bear to reach the shore, which is 5.50 km to the south?

vbc = 2.60 m/s

vce = 0.78 m/s, 40° N of W

x = 5.5 km, S

vbcvce

vbe N

W

vbe = vbc + vce

y- comp

vbc 2.6 sin 270°

vce 0.78 sin 140°

Σy = -2.10 m/s

v

xt

10.2

5500

= 2619 s = 43.6 min