VECTOR V12S - Lighting Products for Lighting Designers · Overview Vector V12S Optimum performance...

16
VECTOR V12S SPECIFIERS GUIDE

Transcript of VECTOR V12S - Lighting Products for Lighting Designers · Overview Vector V12S Optimum performance...

Page 1: VECTOR V12S - Lighting Products for Lighting Designers · Overview Vector V12S Optimum performance in a 12.0 by 12.0mm (0.5in) profile with a single strip PCB using high CRI ColorCORE®

VECTOR V12SSPECIFIERS GUIDE

Page 2: VECTOR V12S - Lighting Products for Lighting Designers · Overview Vector V12S Optimum performance in a 12.0 by 12.0mm (0.5in) profile with a single strip PCB using high CRI ColorCORE®

2

Overview

Vector V12S

Optimum performance in a 12.0 by 12.0mm (0.5in) profile with a single strip PCB using high CRI ColorCORE® technology.

High output V12S-12 model gives up to 1100lm per metre (335lm/ft) output while V12S-05 model provides up to 435lm per metre (130lm/ft).

Ideally suited to concealed lighting applications such as coving, uplighting, shelves, under ledges etc. IP67 version for wet locations with clear or opal cover.

Length increments of 100mm (4in) up to 2005mm (6ft 7in) with Click-Connect PowerTHRU connectors allowing longer light runs. Fixed mount or rotation mount allowing up to 90º rotation for light throw adjustment.

Key Features ≤ 1100lm/m 335lm/ft

≤ 12w/m 5w/ft

≤ 94lm/w

≤ 95 CRI

2000 - 4500K CCT

CLICK-CONNECT

PowerTHRU

24VDC CV

IP50

IP67

Page 3: VECTOR V12S - Lighting Products for Lighting Designers · Overview Vector V12S Optimum performance in a 12.0 by 12.0mm (0.5in) profile with a single strip PCB using high CRI ColorCORE®

3

Applications

V12S is ideally suited to exterior or interior spaces where diffused output is required.

Clockwise from top:

1. Concealed handrail Imperial War Museum London 2. Exterior uplighting 8 Chifley Sydney 3. Undershelf lighting Corinthia Hotel London 4. Lift lighting 99 Bishopsgate London

Page 4: VECTOR V12S - Lighting Products for Lighting Designers · Overview Vector V12S Optimum performance in a 12.0 by 12.0mm (0.5in) profile with a single strip PCB using high CRI ColorCORE®

4

Application Guides

Illuminated Slots

Concealed Coving

150

150

150

150

80

150

SolidEdge

SolidEdge is Lumino’s unique plaster-board edging system. Designed for full compatibility with Vector V12S

lumino.lighting/products/solidedge

Minimum recommended distances shown in mm

Page 5: VECTOR V12S - Lighting Products for Lighting Designers · Overview Vector V12S Optimum performance in a 12.0 by 12.0mm (0.5in) profile with a single strip PCB using high CRI ColorCORE®

5

Uplighter Bar-top Hand-rail

Under Shelf

50

Minimum recommended distances shown in mm

150

150

150

150

Page 6: VECTOR V12S - Lighting Products for Lighting Designers · Overview Vector V12S Optimum performance in a 12.0 by 12.0mm (0.5in) profile with a single strip PCB using high CRI ColorCORE®

6

V12S-12

LED

V12S-12W: 16.7mm LED pitchV12S-05W: 25.0mm LED pitch

Light output ratio

0.60 LOR 98° Opal diffuser0.90 LOR 70° Clear diffuser

V12S-05

ColorCore®

Performance Table 12W /m

CCT lumens1 /m lumens1 /w watts2 /m CRI Ra8 CRI Ra14

2000K 900 77 12 86 83

2400K 950 81 12 85 80

2700K 950 81 12 94 92

3000K 1000 85 12 95 92

3500K 1000 85 12 95 92

4000K 1100 94 12 95 92

4500K 1100 94 12 95 92

1 Maximum total LED lumens per metre excluding LOR factor. 2 Power rated at 24vdc. Data @25°C Ta

Performance Table 5W /m

CCT lumens1 /m lumens1 /w watts2 /m CRI Ra8 CRI Ra14

2000K 350 77 5 86 83

2400K 375 81 5 85 80

2700K 375 81 5 94 92

3000K 400 85 5 95 92

3500K 400 85 5 95 92

4000K 450 94 5 95 92

4500K 450 94 5 95 92

1 Maximum total LED lumens per metre excluding LOR factor. 2 Power rated at 24vdc. Data @25°C Ta

Page 7: VECTOR V12S - Lighting Products for Lighting Designers · Overview Vector V12S Optimum performance in a 12.0 by 12.0mm (0.5in) profile with a single strip PCB using high CRI ColorCORE®

7

Photometric Data ColorCore®

Lumen output tests and photometric data conducted according to LM-79-08 standards by independent UKAS accredited test laboratory, LUX-TSI. Test duration approx 20 minutes at ambient temperature of 24.8ºC with 24 hour burn-in time. Stabilisation period, approx. 45 minutes. Humidity 49.6%RH. Voltage 24.00VDC, current 0.253A.

*Testing on production sample V10S 4000K 505mm 12w/m.

0° 30°30°

60°

90°

120°

0° 30°30°

60°

90°

120°

C90°C0 °

Polar Distribution*CIE 1931 X & Y Chromaticity

y

3.82

3.70

3.76

3.77

max cdC5º

200cd

100cd

50cd

3.82x

dv

dh

0.5

1.0

2.0

4.0

3.0

5.0

m

743

186

46

12

21

7

lx

1.7

3.4

6.7

13.5

10.1

16.9

dv

1.7

3.3

6.7

13.4

10.0

16.8

dh

Illuminance at a distance*Lumen maintenence* @25°C Ta

12,000 60,00036,000hrs

120

100

80

60

40

20

lm%

L70

60,000hrs

4000K

Page 8: VECTOR V12S - Lighting Products for Lighting Designers · Overview Vector V12S Optimum performance in a 12.0 by 12.0mm (0.5in) profile with a single strip PCB using high CRI ColorCORE®

8

Fixed Mount

Rotation Mount

Mounting

14

23

160°

14

15

V12S-MA520-R1 Fixing hole Ø4.0mm

V12S-MA620-R1 Fixing hole Ø4.0mm

Page 9: VECTOR V12S - Lighting Products for Lighting Designers · Overview Vector V12S Optimum performance in a 12.0 by 12.0mm (0.5in) profile with a single strip PCB using high CRI ColorCORE®

9

Three mounts per metre average recommended

End to end or corner alignments with connectors

alongside

Page 10: VECTOR V12S - Lighting Products for Lighting Designers · Overview Vector V12S Optimum performance in a 12.0 by 12.0mm (0.5in) profile with a single strip PCB using high CRI ColorCORE®

10

Dimensions

Standard lengths

~170g per metre

120mm220mm305mm405mm505mm605mm705mm805mm905mm1005mm1105mm1205mm1305mm1405mm1505mm1605mm1705mm1805mm1905mm2005mm*

*Longer lengths available on request. **13mm on 120/220mm lengths.

12.00

105 ~ 2005

7.80

22.50

7.80

13.60

150 ~ 500

~100**

150 ~ 500

~100**

Page 11: VECTOR V12S - Lighting Products for Lighting Designers · Overview Vector V12S Optimum performance in a 12.0 by 12.0mm (0.5in) profile with a single strip PCB using high CRI ColorCORE®

11

Options & Accessories

Powerfeed Options CLICK-CONNECT Powerfeeds for IP20 CB - 150mm WIRE PowerThru GB - 500mm WIRE PowerThru CLICK-CONNECT Extenders for IP20 VECA-CA025-R1 - 250mm VECA-CA100-R1 - 1000mm No Connector for IP67 GA - 500mm WIRE PowerThru HA - 500mm WIRE Single VECA-CA901-R1 Pair of 3M Scotchlok™ IDC sealant connectors providing effective moisture and water protection 15.0 x 7.0 x 7.0 mm

500 500

500

250

1000

50 50

50

150 150

150

Page 12: VECTOR V12S - Lighting Products for Lighting Designers · Overview Vector V12S Optimum performance in a 12.0 by 12.0mm (0.5in) profile with a single strip PCB using high CRI ColorCORE®

12

ColorCore® Technology

High CRI LED

After two years of research, development and testing, Lumino ColorCore® technology has arrived to deliver warm whites in our highest ever colour rendering.

ColorCore® HIGH CRI LEDs reach 95 Ra8 and an outstanding 92 Ra14 value. With HIGH CRI values across the whole R1-R14 colour palette, all your colours are rendered brilliantly. Our proprietary phosphor-core converts single frequency 450nm blue light into full spectrum, visible white light with strong rendering of reds, blues, greens, oranges and yellows.

Ra 95 HIGH CRI

White light in full colour for high specification lighting projects. HIGH CRI of up to 95 across R1-R8 with high values across R9-R14 including up to 86 R9.

ColorCore® can be specified in 2000K Candlelight Warm White. Residential, hotel and bar projects that can now be intimately lit without compromising colour rendering. The new 2000K CCT sits in a whole new palette of colour temperatures running from 2000K through 2400K, 2700K, 3000K, 3500K, 4000K & 4500K CCT.

Each LED is binned to a 2-Step SDCM area to very fine binning coordinates and precise flux specifications. Testing and control of these specifications gives very accurate control of correlated colour temperatures (CCT).

Page 13: VECTOR V12S - Lighting Products for Lighting Designers · Overview Vector V12S Optimum performance in a 12.0 by 12.0mm (0.5in) profile with a single strip PCB using high CRI ColorCORE®

13

CCT CRI Ra8 CRI Ra14 Ra1 Ra2 Ra3 Ra4 Ra5 Ra6 Ra7 Ra8 Ra9 Ra10 Ra11 Ra12 Ra13 Ra14

4500K 95 92 98 95 90 96 96 91 97 96 86 86 93 66 98 94

4000K 95 92 98 97 92 97 95 93 97 94 82 89 95 67 98 95

3500K 95 92 98 97 93 96 96 94 96 91 77 89 95 73 98 95

3000K 95 92 97 97 95 95 96 95 94 88 71 91 94 80 98 96

2700K 94 92 96 98 98 95 95 97 92 83 64 93 96 82 97 98

2400K 85 80 83 91 96 82 82 88 86 68 33 78 80 72 84 97

2000K 86 83 85 95 95 81 85 96 83 66 35 88 81 87 87 98Figures based on photometric testing and evaluation in accordance with IESNA LM-79-08.

Boulevard Hotel, Baku Azerbaijan - Maurice Brill Lighting Design

Page 14: VECTOR V12S - Lighting Products for Lighting Designers · Overview Vector V12S Optimum performance in a 12.0 by 12.0mm (0.5in) profile with a single strip PCB using high CRI ColorCORE®

14

ColorCore®

High UV Environments

For locations of continuous, high UV exposure, we recommend specifying a special order PMMA cover in opal or clear. Contact Lumino for further details.

ORDER CODES IP50

CCT

Q 2000KS 2400KT 2700KU 3000KV 3500KW 4000KX 4500K

LED

1M 5WM1L 12WM

CLICK-CONNECT

CB 50MM PowerTHRUDB 50MM Single Feed

NO CONNECTOR

GA 500MM PowerTHRU HA 500MM Single Feed

C D D -V 1 2 S 2 0 0 5 Q 1 L C B-

COVER

D OPX OPAL E CLEAR

LENGTH

XX05 MM

FINISH

D SILVER (Anodised) E WHITE (RAL9003)F BLACK (RAL 9005)

EXAMPLE ABOVE: VECTOR V12S IP50 SILVER OPX 79IN(2005MM) 2000K 12WM CLICK-CONNECT 50MM POWER-THRU

ORDER CODES IP67

CCT

Q 2000KS 2400KT 2700KU 3000KV 3500KW 4000KX 4500K

LED

1M 5WM1L 12WM

NO CONNCETOR

GA 500MM PowerTHRU HA 500MM Single Feed

I D D -V 1 2 S 2 0 0 5 Q 1 L G A-

COVER

D OPX OPAL E CLEAR

LENGTH

XX05 MM

EXAMPLE ABOVE: VECTOR V12S IP67 SILVER OPX 79IN(2005MM) 2000K 12WM 500MM POWER-THRU

FINISH

D SILVER (Anodised) E WHITE (RAL9003)F BLACK (RAL 9005)

Page 15: VECTOR V12S - Lighting Products for Lighting Designers · Overview Vector V12S Optimum performance in a 12.0 by 12.0mm (0.5in) profile with a single strip PCB using high CRI ColorCORE®

15

Certification Standards

IEC 60598-2-4:1997 Luminaires used in conjuction with IEC 60598-1:2008 IEC 62031:2008 LED Modules for general lighting GOST R IEC 60598-2-4:1999 Luminaires used in conjuction with GOST R IEC 60598-1:2011 GOST R IEC 62031 EN55015: 2006+A1 :2007 EN61547: 1995+A1 :2000 Following the provisions of EMC Directive 2004/108/EC

CB Testing Laboratory: Intertek Product Safety Laboratory (UK) UL Certified US/CA E364314 Low-voltage Lighting Systems, Power Units, Luminaires and Fittings

Technology

Operating environment

Running Temperature (Tc): Ave. 17°C above Ta Ambient Temperature (Ta): -20 to +40°C Ingress Protection rating: IP50 / IP67 IP67

IP50

Measurement tolerances

Total Luminous Flux ±10% Correlated Colour Temperature ±100K Colour Rendering Index ±2 Power ±5%

The information in this document is subject to change without notice

Check for latest specifications at www.lumino.lighting

Copyright © 2016 LUMINO

E&OE

Page 16: VECTOR V12S - Lighting Products for Lighting Designers · Overview Vector V12S Optimum performance in a 12.0 by 12.0mm (0.5in) profile with a single strip PCB using high CRI ColorCORE®

SG-V12S-R1602

VECTOR V12S

LUMINO Lumino House, Lovet Road Harlow, Essex CM19 5TB United Kingdom

T +44 (0) 1279 635411 E [email protected]

www.lumino.lighting