VDI Windows Installation Guide-V2

8/11/2019 VDI Windows Installation Guide-V2

1/14

Page 1

VDI - Windows Installation &

Configuration Guide

Client Installation & Setup Documentation

Download the two clients, the Exceed OnDemand (EOD) client and the Leostream client, to

your laptop/desktop. Website:http://lcb-atx.am.freescale.net/

NOTE: YOU DO NOT NEED TO LOGIN TO DOWNLOAD CLIENTS

Leostream package is:

Windows:http://lcb-atx.am.freescale.net/tpc/LeostreamConnectSetup2-10-63-

0.exe

EOD Installation packages:

Windows (32bit):http://lcb-atx.am.freescale.net/tpc/ExceedOnDemand8.3.exe

Windows (64bit):http://lcb-atx.am.freescale.net/tpc/ExceedOnDemand8.3-

64bit.exe
http://lcb-atx.am.freescale.net/http://lcb-atx.am.freescale.net/http://lcb-atx.am.freescale.net/http://lcb-atx.am.freescale.net/tpc/LeostreamConnectSetup2-10-63-0.exehttp://lcb-atx.am.freescale.net/tpc/LeostreamConnectSetup2-10-63-0.exehttp://lcb-atx.am.freescale.net/tpc/LeostreamConnectSetup2-10-63-0.exehttp://lcb-atx.am.freescale.net/tpc/LeostreamConnectSetup2-10-63-0.exehttp://lcb-atx.am.freescale.net/tpc/ExceedOnDemand8.3.exehttp://lcb-atx.am.freescale.net/tpc/ExceedOnDemand8.3.exehttp://lcb-atx.am.freescale.net/tpc/ExceedOnDemand8.3.exehttp://lcb-atx.am.freescale.net/tpc/ExceedOnDemand8.3-64bit.exehttp://lcb-atx.am.freescale.net/tpc/ExceedOnDemand8.3-64bit.exehttp://lcb-atx.am.freescale.net/tpc/ExceedOnDemand8.3-64bit.exehttp://lcb-atx.am.freescale.net/tpc/ExceedOnDemand8.3-64bit.exehttp://lcb-atx.am.freescale.net/tpc/ExceedOnDemand8.3-64bit.exehttp://lcb-atx.am.freescale.net/tpc/ExceedOnDemand8.3-64bit.exehttp://lcb-atx.am.freescale.net/tpc/ExceedOnDemand8.3.exehttp://lcb-atx.am.freescale.net/tpc/LeostreamConnectSetup2-10-63-0.exehttp://lcb-atx.am.freescale.net/tpc/LeostreamConnectSetup2-10-63-0.exehttp://lcb-atx.am.freescale.net/


2/14

Page 2

VDI - How do I know if my windows

kernel is running in 32bit or 64bit?

Left click on start button

Right click on Computer and propertie

Check the system type
http://superuser.com/questions/29943/how-do-i-know-if-my-linux-kernel-is-running-in-32bit-or-64bithttp://superuser.com/questions/29943/how-do-i-know-if-my-linux-kernel-is-running-in-32bit-or-64bithttp://superuser.com/questions/29943/how-do-i-know-if-my-linux-kernel-is-running-in-32bit-or-64bithttp://superuser.com/questions/29943/how-do-i-know-if-my-linux-kernel-is-running-in-32bit-or-64bit


3/14

Page 3

EOD

Windows Installation & Setup Run the "EOD" installer just downloaded. As shown in the images below, use the default

settings to complete the installation

Change directory to which you would like unzip the installer (for example c:\EOD_client) and

click on Unzip.


4/14

Page 4

Using Windows Explorer, browse to directory where the installation files were unzipped, and

run Setup.exe


5/14


6/14

Page 6


7/14

Page 7


8/14

Page 8


9/14

Page 9

Windows Leostream Installation

Run the LeostreamConnect installer . Use the default settings as shown in the images belowuntil you reach the "Select Additional Tasks screen"


10/14

Page

10

On 'Select Additional tasks' screen, modify the following (as shown below) :

Uncheck (if checked) 'Enable USB over IP' (not applicable to our environment)

Check 'Enable client-side credential passthrough'


11/14

Page

11

[Optional] Uncheck 'Install Microsoft VC++ runtime' (not required)

Complete installation


12/14

Page

12

NOTE: A restart of the system is NOTrequired


13/14

Page

13

Leostream Client Configuration

Configure Leostream client

Launch the Leostream client; you will get a message asking you to enter the connection

broker address. Click OK. The application will minimize to an icon on the right-handside of the task bar.

Find the Leostream icon in the icon list at the right side of the task bar and right-click on

it. Select 'Options' to bring up the Options menu

Select the 'Broker' tab

Uncheck the 'Obtain Connection Broker address' check-box and enter "lcb-

atx.am.freescale.net" into the 'Address' window and click 'OK'

Usage Notes

The VM assigned to you by the connection broker will remain assigned to you until you request

it be released, or until you log out and remain logged out for more than 1 day [NOTE: 'logged

out'is equivalent to logging out of a Linux Workstation or shutting down a VNC server. It is NOT

the same as disconnecting fromorsuspendingyour remote session.

Custom configurations of Xconfig settings are possible by copying one of the standard configs

provided and then making modification to it. This custom config will reside only on the VM


14/14

Page

assigned to you. However you can export it to your local laptop/workstation so that it can be

preserved or transferred to a different VM if you change hosts.

Session shadowing, or sharing your screen is possible but not in a "Multi-monitor" configuration.

To share your session

Right-click on the EOD ('X') icon in the top-left corner of the window border and select

the 'Session'->'Share' menu

Make sure "Enable" is check-marked then click on "Manage Share List"

Click the 'Add' button to bring up the user list

Select the usernames you wish to share the session with, or type them into the field at

the bottom of the window and click 'Ok'

Set the desired permissions for each participant, or remove unneeded ones.

Click 'Close'

For a user to join a shared session, that user must lauch the EOD client directly. The

Leostream broker does not manage sharing sessions

NOTE: a maximum of 5 participants can be part of a sharing session

NOTE: cut-n-paste only works for the session owner, not for any of the participants

(regardless of permissions)

Printing to a local printer is possible using the 'elpr' command which can be found in

/usr/local/bin. Printing to a local printer can be as simple as "elpr "

VDI Windows Installation Guide-V2

Documents

Transcript of VDI Windows Installation Guide-V2