APL in processing industry: focus on assessments Sanne van Rijswijk, VAPRO-OVP.
Vapro-SS Flashing
Transcript of Vapro-SS Flashing
VaproShield LLC | 915 26th Ave. N.W. | Suite C5 | Gig Harbor, WA 98335 | Toll Free 1-866-731-7663 | www.VaproShield.com | 06/07/21 1 of 3
Vapro-SS Flashing™
a multi-purpose stainless steel self-adhered flashing. Product No.: 49854500, 49854800, 49856000, 49857700
PRODUCT DATA SHEET
Product DescriptionVapro-SS Flashing is a multi-purpose, flexible, stainless steel, self-adhered flashing for use in a variety of applications.
BASIC USE
Vapro-SS Flashing is a transition flashing that provides a watertight bond. It adheres to the majority of air barriers, WRB’s, sealants, insulations, below grade waterproofing and roofing membranes.
MATERIALSVapro-SS Flashing is a flexible 2 mil (0.05 mm) sheet of type 304 stainless steel, 8 mil ( 0.2032 mm) of butyl adhesive and a siliconized release liner.
BENEFITSUse in a variety of applications:
• Flexible 2 mil sheet of type 304 stainless steel
• 8 mils of butyl adhesive with a siliconized release liner
• Best in class puncture and tear resistance
• Install in temperatures ranging from 20°F to 170°F (-6°C to 75°C)
• Stable and air tight from -70°F to 250°F (-56°C - 121°C)
• Class A, ASTM E84 fire rated
• Resistant to mold, mildew and rot
• Sustainable design - manufactured from 60% recycled stainless steel
COMPATIBILITY
Contact VaproShield Technical – if you have additional compatibility questions.
SIZES
Vapro-SS Flashing available in 4, 6, 12, or 18 inches x 50 ft. (10, 15, 30 or 45 cm x 15.24 m)
• Through-Wall Flashing for masonry and stone structural components
• Transition membrane (air barriers, WRB, roofing membranes, plaza and below grade waterproofing)
• Curtain wall perimeter flashing
• Window and door pan fabrication
• Jamb closure flashing
• Roof to parapet transition flashing Installation
STORAGE AND HANDLING Store material in original packaging. Protect rolls from direct sunlight and inclement weather. Storage conditions: (0-100˚F) (-17.8˚ – 37.8˚C)
DETAILSVisit VaproShield.com to view details with multiple applications.
LIMITATIONS Vapro-SS Flashing should be covered within a few days of installation to protect it from damage from different trades, the environment and falling debris.
Avoid placing the adhesive with other materials that have high plasticizer contents.
AvailabilityVaproShield products are available throughout North America, Central and South America, and New Zealand.
WarrantyA 20-year material warranty is available
• All VaproShield materials • Spray Polyurethane
• Exterior Rigid Insulation • Exterior Gypsum
• Plywood • Concrete
• Metals
VaproShield LLC | 915 26th Ave. N.W. | Suite C5 | Gig Harbor, WA 98335 | Toll Free 1-866-731-7663 | www.VaproShield.com | 06/07/21 1 of 3
PRODUCT DATA SHEET
Typical Vapro-SS Flashing ApplicationsVapro-SS Flashing Product™ No.: 49854500, 49854800, 49856000, 49857700
Vapro-SS Flashing Product No.: 49854500, 49854800, 49856000, 49857700
Backup wall construction may vary per design
WrapShield SA Self-Adhered WRB/Air Barrier
Typical cavity insulation by others
Air space for drainage
Typical masonry veneer by others
Mech. fastened VaproTermination Bar w/ cont. bead of VaproBond sealant at top
Typical shelf angle anchored to structure by others
Typical drip edge by othersVapro-SS Flashing
Thru-wall Shelf Angle Detail with VaproTermination Bar
Exterior insultation
Anchored masonry veneer
Continuous mortar collection mesh
Vapro-SS Flashing installed under field membrane lap, shingled over lintel and metal head flashing
Hot dipped galvanized steel loose lintel
Vapro-SS Flashing installed over wood blocking, shingled over field membrane
Single-wythe CMU wall
WrapShield SA installed directly to CMU wall, behind exterior insulation
CMU Backup Wall with Brick Veneer and Post-Applied Ties
WrapFlashing SA Self-Adhered applied directly to sheathing + folded 2.75” inside of R.O.
Vapro-SS Flashing installed in shingle fashion (sill, jambs, head)
Window installation and sealant joints + backer rod (by others)
Head flashing (by others) over Vapro-SS Flashing embedded in VaproBond
Window Rough Opening
VaproShield LLC | 915 26th Ave. N.W. | Suite C5 | Gig Harbor, WA 98335 | Toll Free 1-866-731-7663 | www.VaproShield.com | 06/07/21
ACCESSORIESProduct Part No. Roll Sizes
WrapFlashing Roll (Mechanically Attached) 40105500 40108000
Roll Size: 11 3/4” x 164’ (298mm x 50m) 161 S/F (15 S/M) Roll Size: 19 2/3” x 164’ (500mm x 50m) (25 S/M) Weight: 9.5lbs (4.3kg)
WrapFlashing SA Self-Adhered Roll 4610559046108090
Roll Size: 11 3/4” x 164’ (298mm x 50m) 161 S/F (15 S/M) Roll Size: 19 2/3” x 164’ (500mm x 50m) 269 S/F (25 S/M)
RevealFlashing Roll (Mechanically Attached) 4730500047305500
Roll Size: 6 1/2” x 164’ (165mm x 50m) 88 S/F (8.2 S/M)Roll Size: 11 3/4” x 164’ (298mm x 50m) 161 S/F (15 S/M)
RevealFlashing SA Self-Adhered Roll 44305500 Roll Size: 11 3/4” x 102’ (298mm x 31.1m) 100 S/F (9.3 S/M)
VaproBond Modified Silicone Adhesive Sealant 60309800 20 oz (.57 kg) Sausage Coverage 100 Lin. Ft (30.5 Lin. M)
Outboard Vapor-permeable insulation
WrapShield SA Self-Adhered WRB/Air Barrier
3” overlap vertical seams
Air gap behind claddingWrapShield SA laps over flashing
Vapro-SS Flashing shingled under flashing and over roofing membrane
Flashing (by others)
Roofing membrane (by others)
Low Roof to Wall Detail
PRODUCT DATA SHEET
Typical Vapro-SS Flashing Applications
Vapro-SS Flashing Product™ No.: 49854500, 49854800, 49856000, 49857700
Vapro-SS Flashing Product No.: 49854500, 49854800, 49856000, 49857700
3 of 3
TESTING DATA
PROPERTY STANDARD RESULT
Application Temperature 20°F to 170°F (-6°C to 75°C)
Tensile Strength ASTM D882 Standard Test Method for Tensile Properties of Thin Plastic Sheeting 100,000 psi
Puncture ASTM E154 Standard Test Methods for Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs, on Walls, or as Ground Cover
2,500 psi
Fire ResistanceASTM E84 Standard Test Method for Surface Burning Characteristics of Building Materials
PASS, Class A
Mold Resistance ASTM D3273 Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber
PASS