Multi-Lite Pendant Lamp, Satellite Pendant Lamp, G10 Floor ...
Vaporgard incandescent 1L Cl. I, Div. 2, Groups A, B, C, D ......DWith G55, G56, G57, G58 color...
Transcript of Vaporgard incandescent 1L Cl. I, Div. 2, Groups A, B, C, D ......DWith G55, G56, G57, G58 color...
-
www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2019 Eaton 31
1L1LVaporgard incandescent luminaires
Cl. I, Div. 2, Groups A, B, C, D (all mounting types except stanchion)Wet LocationsNEMA 3, 3R
Applications:Vaporgard™ incandescent luminaires are used:• Indoors or outdoors in industrial locations
where enclosed and gasketed fixtures are required
• In tunnels, building entrances and similar locations, where moisture, dirt, chemicals, vibration or rough usage are a problem
• For flush or surface mounting on ceiling or wall; pendant or in conduit systems; with or without a cast outlet box
Features:• Designed to exclude dirt, moisture and
corrosive vapors from the interior of the luminaires and the conduit system
• There are no screws to remove as the shock absorbing socket strap is keyhole slotted and removes quickly for ease of wiring
• The glass globe guard assembly is installed and/or removed as a unit, making it necessary to handle only one piece in relamping
• There are no crevices to accumulate a dirt or dust build-up and fixture has an attractive finish with a smooth, dust and dirt shedding design
• Configured glass globe has vertical fluting and stippled bottom which provides for more even light distribution and glare elimination
• For non-hazardous locations, shatterproof plastic polycarbonate globes are available for use with the 200 watt series
• Reversible offset socket mounting strap permits use of various size lamps while holding light center in same position for maximum light output and efficiency
• Shock absorbing medium base lamp socket
Krydon fiberglass-reinforced polyester reflectors:• Reflectance is equivalent to the finest
porcelain enamel• Cannot corrode – no enamel to chip and
rust• Ultraviolet inhibitors are incorporated in
the material to prevent discoloration and brittleness
Standard materials:• Bodies and guards – copper-free
aluminum• Globes – heat- and impact-resistant
tempered glass; colored glass: non-tempered (G55, G56, G57, G58); plastic: polycarbonate (G63, G65, G67)
• Reflectors – Krydon fiberglass-reinforced polyester
Standard finishes:• Bodies and guards – epoxy powder coat• Krydon – high reflectance white
Options:Description Suffix• Teflon® coating on globe
for increased shatter protection ........ S808 G24 globe 200 watt series only• 250V nameplate for export
applications ........................................./250• Plastic polycarbonate
globe ...................................... see page 34
Electrical/size ratings:• Up to 300 watt, PS-30 medium base lamp• 1/2” to 11/4” hubs• 120V nameplate is standard – for NEC
compliance• 250V nameplate is optional; supplied
when ordered with suffix /250
Certifications and compliances:NEC/CEC:• Class I, Division 2• UL standard: 1598• CSA standard: C22.2 No. 9• UL/CSA fixture fitting• Wet locations
Temperature performance data – Class I, Division 2:(Based on 40°C ambient)
Lamp watts T-code
Supply wire °C
150W T2A 150200W T2B 200300W T2B 150
Photometrics:• Complete photometrics can be found at
www.crouse-hinds.com/photometrics
Teflon® is a registered trademark of E.I. duPont Co.
-
www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2019 Eaton32
1L1L
Ceiling mount with junction box – VXHF
Ceiling mount for recessed 4” round box – VXH
Through feed – VDC
Pendant mount – VDALuminaire components
Hub size WattsMax. lamp size
Cat. # Complete with globe/guard
Cat. # Pendant body
Cat. # Globe
Cat. # Guard
1/2” 150150W, A-21
VDA15GP VDA15 G54 P503/4” 150 VDA25GP VDA25 G54 P501” 150 VDA35GP VDA35 G54 P501/2” 200
200W, A-23VDA12GP VDA12 G24 P21
3/4” 200 VDA22GP VDA22 G24 P211” 200 VDA32GP VDA32 G24 P211/2” 300 300W,
PS-25 & PS-30
VDA13GP VDA13 G34/G251 P223/4” 300 VDA23GP VDA23 G34/G251 P221” 300 VDA33GP VDA33 G34/G251 P22
Luminaire components
Hub size WattsMax. lamp size
Cat. # Complete with globe/guard
Cat. # Through feed body
Cat. # Globe
Cat. # Guard
1/2” or 3/4” 150 150W, A-21 VDC25GP VDC25 G54 P50
1/2” or 3/4” 200 200W, A-23 VDC22GP VDC22 G24 P21
1/2” or 3/4” 300 300W, PS-25 & PS-30VDC23GP VDC23 G34/G251 P22
Luminaire components
Hub size WattsMax. lamp size
Cat. # Complete with globe/guard
Cat. # Lamp socket body
Cat. # Globe
Cat. # Guard
1/2” or 3/4” 150 150W, A-21 VXH15GP VXH15 G54 P50
1/2” or 3/4” 200 200W, A-23 VXH12GP VXH12 G24 P21
1/2” or 3/4” 300 300W,PS-25 & PS-30VXH13GP VXH13 G34/G251 P22
Luminaire components
Hub size WattsMax. lamp size
Cat. # Complete with globe/guard
Cat. # Lamp socket body
Cat. # Globe
Cat. # Guard
Cat. # Junction box
1/2” or 3/4” 150 150W, A-21 VXHF25GP VXH15 G54 P50 VXF20
1/2” or 3/4” 200 200W, A-23 VXHF22GP VXH12 G24 P21 VXF20
1/2” or 3/4” 300 300W, PS-25 & PS-30VXHF23GP VXH13 G34/G251 P22 VXF20
Ordering information:
Vaporgard incandescent luminaires
Cl. I, Div. 2, Groups A, B, C, D (all mounting types except stanchion)Wet LocationsNEMA 3, 3R
Note: All fixtures supplied with 1/2” reducers, except for pendant mount.
-
www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2019 Eaton 33
1L1L
45° stanchion mount – VXHA
Wall mount with junction box – VXHBF
Wall mount – adapter kit
Wall mount – VXHTLuminaire components
Hub size WattsMax. lamp size
Cat. # Complete with globe/guard
Cat. # Wall bracket mounting module
Cat. # Body
Cat. # Globe
Cat. # Guard
1/2” or 3/4” 150 150W, A-21 VXHT25GP VXT20 VXH15 G54 P50
1/2” or 3/4” 200 200W, A-23 VXHT22GP VXT20 VXH12 G24 P21
1/2” or 3/4” 300 300W,PS-25 & PS-30VXHT23GP VXT20 VXH13 G34/G251 P22
Description Cat. #
Mounts wall mount VXHT to a 4” round box
VXT K1
Luminaire components
Hub size WattsMax. lamp size
Cat. # Complete with globe/guard
Cat. # Wall bracket mounting module
Cat. # Body
Cat. # Globe
Cat. # Guard
Cat. # Junction box
1/2” or 3/4” 150 150W, A-21 VXHBF25GP VXT20 VXH15 G54 P50 VXF20
1/2” or 3/4” 200 200W, A-23 VXHBF22GP VXT20 VXH12 G24 P21 VXF20
1/2” or 3/4” 300 300W,PS-25 & PS-30VXHBF23GP VXT20 VXH13 G34/G251 P22 VXF20
Luminaire components
Hub size WattsMax. lamp size
Cat. # Complete with globe/guard
Cat. # Stanchion mounting module
Cat. # Body
Cat. # Globe
Cat. # Guard
11/4” 150 150W, A-21 VXHA45GP VXA4 VXH15 G54 P50
11/4” 200 200W, A-23 VXHA42GP VXA4 VXH12 G24 P21
11/4” 300 300W,PS-25 & PS-30VXHA43GP VXA4 VXH13 G34/G251 P22
Ordering information (continued):
Vaporgard incandescent luminaires
Cl. I, Div. 2, Groups A, B, C, D (all mounting types except stanchion)Wet LocationsNEMA 3, 3R
Note: All fixtures supplied with 1/2” reducers, except for pendant mount.
-
www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2019 Eaton34
1L1LVaporgard incandescent
luminairesAccessories
Medium base lamp receptacle with strapShock-absorbing
Reflectors
Dome
30° angle
VXFT – 5 hubs, 4 plugs
For use when rear wiring entry is required.Use in lieu of VXF10 or VXF20.
GlobesA & guards
150W and 200W globe
300W globe
Guards for glass globes(Not for use with plastic globes)
P50 and P21 P22
Applications:For use in:• Food processing plants and canneries,
dairies, breweries and bakeries• Emergency lighting
Features:• Shatterproof, which precludes
contamination of food products with broken particles of glass
• Designed to comply with U.S. Dept. of Agriculture specification for food processing plants
• Provides protection against vandalism, with resultant lower replacement and maintenance costs
• Particularly adaptable for use on emergency police or fire alarm boxes
• Same size as G24 series glass globes; existing installations can be changed to plastic globes simply by replacing globe
• For use with 200 watt series luminaires such as VDA22, etc.
• For use without guard
Plastic globesE
Shatterproof polycarbonate plastic globeF
AAll glass globes have fluted side and stippled bottom.
BG251 globe required when P22 guard is used. Use G34 globe when guard is not used.
CG24 is available with a Teflon coating for increased shatter protection by adding suffix S808 only.
DWith G55, G56, G57, G58 color globes, maximum lamp size is 60 watts for outdoor applications.
ELamp must be mounted in vertical position base up to 45° (stanchion) only.
FPrior to wash down, globes must be cool.
Mounting adapter kit
Note: Polycarbonate globes for non-hazardous locations only.
Description Cat. #
Shock-absorbing medium base lamp receptacle with strap
V84
Max. lamp sizeCat. # Dome
Cat. # 30° angle
150W, A-21 RD64 RA64200W, A-23, A-25, PS-25 and300W, PS-30
RD71 RA71
Hub size Cat. #1/2” VXFT103/4” VXFT20
Max. lamp size
Color
Cat. # 150 watt, A-21
Cat. # 200 watt, A-23, A-25, PS-25
Cat. # 300 watt, PS-25, PS-30B
Clear (heat-resisting)
G54 G24C G34/G251
Green G55D G25Blue G56D G26Red G57D G27Amber G58D G28
Max. lamp size Cat. #
150W, A-21 P50200W, A-23, A-25, PS-25 P21300W, PS-30 (with G251 only) P22
Color Max. lamp size Cat. #
Natural 200W, A-23 G63Green 200W, A-23 G65Red 200W, A-23 G67
Description Cat. #
Allows for the mounting of non-Eaton outlet boxes to the VXT20 wall mount bracket and VXH ceiling mount bracket
VXT K1
-
www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2019 Eaton 35
1L1L
150WVD
A15
VDA
25VD
A35
150WVD
C25200WVD
A12
VDA
22VD
A32
300WVD
A13
VDA
23VD
A33
FLUO
RESCENT
VFA122
VFA222
VFA322
PEND
AN
TVD
A/VFA
200WVD
C22300WVD
C23
FLUO
RESCENT
VFC222
THRU
FEED
VDC/VFC
150W
VXH15
200W
VXH12
300W
VXH13
FLUO
RESCENT
VFH122
BOX M
OU
NTIN
G
VXH1/VFH
1
150WG
LOBE &
GU
ARD
G54
G55 G
REENG
56 BLUE
G57 RED
G58 A
MBER
G54 CLEA
R HEAT RESISTIN
G
VXF20VXFT20 (O
RDER SEPA
RATELY)
150WVXH
F25200WVXH
F22300WVXH
F23
BOX M
OU
NTIN
G
VXHF/VFH
F
FLUO
RESCENT &
200WG
LOBE &
GU
ARD
G24
G25 G
REENG
26 BLUE
G27 RED
G28 A
MBER
G24 CLEA
R HEAT RESISTIN
G
VXHT25
VXHT22
VXHT23
WA
LL MO
UN
TVXH
T/VFHT
300W G
LOBE
WITH
OU
T GU
ARD
G34
CLEAR H
EAT RESISTING
300W G
LOBE
WITH
GU
ARD
G251 G
LOBE
&P22 G
UA
RD
PLATEG
ASKET
VXT-K1
150WVXH
BF25
200WVXH
BF22300WVXH
BF23
FLUO
RESCENT
VFHBF222
WA
LL & JU
NC
TION
BOX
VXHBF/VFH
BF
VXF20VXFT20
VXA4 (45° A
ngle)
VXH15
VXH12
VXH13
VFH122
VXHA
45VXH
A42
VXHA
43
FLUO
RESCENT
VFHA
422
AN
GLE A
DA
PTERSTA
NCH
ION
MO
UN
TVXH
A4/VFH
A4
P50P21
RD64
RA64
RD71
RA71
150W300W
200W
150W200W
300W
CLEAR H
EAT RESISTING
FLUO
RESCENT
VFHT222
FLUO
RESCENT
VFHF222
VXT20G
ASKET
0305016
VXH15
VXH12
VXH13
VFH122
VFH122
VXH13
VXH12
VXH15
03057290305017
AD
APTER KIT FO
R MO
UN
TING
VXT20 AN
D
4" OU
LET BOX (BY O
THERS)
VXH15, VXH
12, VXH13, VFH
122 TO
G63 CLEAR PLASTIC POLYCARBONATEG65 GREEN PLASTIC POLYCARBONATEG67 RED PLASTIC POLYCARBONATE
ORDERED WITH PLASTIC GLOBE)
(NO GUARD AVAILABLE WHEN
Vaporgard incandescent luminaires
Cl. I, Div. 2, Groups A, B, C, D (all mounting types except stanchion)Wet LocationsNEMA 3, 3R
Family tree:
-
www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2019 Eaton36
1L1L
VDC VXH and VXHF(omit box for VXF)
VXHT and VXHBF
(omit box for VXHB)
Dimensions (in inches):
VDA
150 watt, A-21
200 watt, PS-25
300 watt, PS-30
a 127/8 167/8 167/8b 111/8 145/8 145/8c 53/8 6 6d 313/16 4 4e 87/16 91/8 91/8f 12 14 14g 813/16 101/2 12h 9 1013/16 131/8j 41/2 611/16 611/16
Max. lamp size a
150W, A-21 53/8200W, A-23, A-25, PS-25 and 300W, PS-30 6
Vaporgard incandescent luminaires
Cl. I, Div. 2, Groups A, B, C, D (all mounting types except stanchion)Wet LocationsNEMA 3, 3R