Vano Motore R2 by Tarlo_Tutorial-ENG
-
Upload
luca-tarlazzi -
Category
Documents
-
view
233 -
download
1
description
Transcript of Vano Motore R2 by Tarlo_Tutorial-ENG
Tutorials for coloring and engine assembly The engine compartment is PETg 0.5 mm transparent WITHOUT film. The product is to be cut and color. The package also includes the Duomi Bar
Coloring
Wash the part with soap and
water.
It starts with the coloring on the
back of the motor head (in this
case red).
No need to mask anything, just
make sure not to get the other
side.
Now, on the upper side mask
the motor head that has just
behind and colored by coloring
entire piece.
Usually the real machines have
the inside of the engine
compartment of the same color
of the body.
Color on the top part of the
whole on the engine (hoses,
filter, radiator, etc. ..) with BLACK
opaque.
Use color model or acrylics, apply
with a brush.
Now with markers or paint brush colors refine the details of the various components of the engine.
Cut
Bend the tabs
Attach to the body with adhesive tape or micro screws.
…Good job!
Gallery
All parts are original (no clones) and made by hand, it is possible that you
may be small differences from one to another
TaRLo.RC STORE: http://www.rcdrift.it/public/forum/viewtopic.php?f=4&t=35999 Tarlo YouTube Channel: http://www.youtube.com/user/Tarlosky?feature=mhee Tarlo’s Garage: http://www.rcdrift.it/public/forum/viewtopic.php?f=135&t=33453
Tarlo-Rc © 2012