Valves - Ampac Safety | Global Solutions - Local Focus - Fire...
Transcript of Valves - Ampac Safety | Global Solutions - Local Focus - Fire...
Fire Sprinklers
Distributed By: www.ampacsafety.net
Ampac Fire Safety is a pending trademark. Due to ongoing development specifications are subject to change without notification.1
Ampac Fire Safety Fire Sprinklers - Hydrants - Hose Reels
Ampac Safety stock a comprehensive range of approved valves suitable for a wide variety of Fire applications. Our range has been carefully selected from high quality manufacturers and augments our capacity to supply customers a comprehensive product range for a wide variety of wet fire installations.
The stock range includes the following Valve types: • Alarm Valves • Lockable Brass Ball Valves• Butterfly Valves• Brass Spring Check Valves • Brass Swing Check Valves • Roll Groove Check Valves • Table E Wafer Check Valves • Double Check Valves Lever Handle • Double Check Valves • Brass Gate Valves• Roll Groove OS&Y Gate Valves• Other Valves available Ampac Fire Safety are committed to supplying customers with high quality sprinkler project solutions including market competitve prices for aftermarket service items.
Valves
Features• Extensive range of quality Valves
• Competitive market prices
• FM / UL Approved
• Products Comply with local installation requirements
Fire Sprinklers
Distributed By: www.ampacsafety.net
Ampac Fire Safety is a pending trademark. Due to ongoing development specifications are subject to change without notification.2
Ampac Fire Safety Fire Sprinklers - Hydrants - Hose Reels
Specifications• UL Listed • C-UL & UL Listed • FM approved • CE
Schematic
Working Pressure• 300 PSI
Working Temperature• -10°C to +82 °C
Corrosion Protection• Fusion Bonded Epoxy Coated Interior & Exterior
to AWWA C550 Standard
SpecificationsSize (mm) 80nb 100nb 150nb 200nb
L 25cm 25cm 30cm 40cm
Weight Kg 9.09 10 20.9 48
Item Number 2600-1001 2600-1002 2600-1003 2600-1004
Material SpecificationsPart Name Material
1 Body Ductile Iron
2 Cover bolt Steel
3 Seat Ring Bronze
4 Cover Ductile Iron
5 Clapper Stainless Steel
6 Retaining Ring Stainless Steel
7 Hinge Pin Stainless Steel
8 Cover Gasket Vellumoid
9 Clapper Facing Disk EPDM
10 Disc Retainer Stainless Steel
11 Lock Nut Stainless Steel
12 Disk Retainer Bolt Stainless Steel
13 Sealing Washer Hard Fibre
14 Hinge Pin x2 Bronze
15 Name Plate Aluminium
16 Drive Screws Stainless Steel
17 Torsion Spring Stainless Steel
Globe Alarm Valves 80nb - 200nb
Fire Sprinklers
Distributed By: www.ampacsafety.net
Ampac Fire Safety is a pending trademark. Due to ongoing development specifications are subject to change without notification.3
Ampac Fire Safety Fire Sprinklers - Hydrants - Hose Reels
Specifications• AGA Approved Gas Ball Valve • Thread AS1722.1• Application : For Low to medium gas applications • Also useable on water , certain Chemicals and
oils
Schematic
Working Pressure• 2500 kPa• 360 PSI
Working Temperature• Max 60 °C
Corrosion Protection• Fusion Bonded Epoxy Coated Interior & Exterior
to AWWA C550 Standard
SpecificationsSize (mm) 15nb 20nb 25nb 32nb 40nb 50nb
L 60 66.5 76 92.8 100.5 122
H 39 43 59.5 63 77 89
W 95 115 115 125 180 180
A 16.5 18 19.5 23 23 27
Weight Kg 0.2 0.3 0.43 0.74 1.12 1.72
Item Number 2600-2001 2600-2002 2600-2003 2600-2004 2600-2005 2600-2007
Material SpecificationsPart Name Material
Body Brass (Nickel Plated)
Seat Retainer Brass (Nickel Plated)
Seat P.T.F.E
Ball Brass Chromium Plated
Stem Brass
Gland Brass
Packing Viton Double O Ring
Lever Stainless Steel
Lever Retaining Nut Brass (Nickel Plated)
Lockable Ball Valves 15nb - 50nb
Fire Sprinklers
Distributed By: www.ampacsafety.net
Ampac Fire Safety is a pending trademark. Due to ongoing development specifications are subject to change without notification.4
Ampac Fire Safety Fire Sprinklers - Hydrants - Hose Reels
Specifications• Australian Standard Watermark approved • Applications : HVAC, Gas, Petrochemical, Pulp &
Paper, Water
Schematic
Working Pressure• 1600 kPa
Working Temperature• Max °C
Corrosion Protection• Akzo Nobel paint
SpecificationsSize (mm) 50nb 65nb 80nb 100nb 150nb 200nb
H1 70 79 83 92.8 139 170
H2 140 155 160 63 200 240
H3 31.8 31.8 31.8 125 31.8 35.5
D 125 145 160 180 240 295
L 42.04 44.68 45.21 52 55.7 60.1
K 11 11 11 14 17 17
F 14.1 14.1 14.4 18.1 22.1 22.1
E 70 70 70 70 70 102
N-D2 4-19 4-19 8-19 8-19 8-23 12-23
4-D1 10 10 10 10 10 12
Weight Kg 3.1 3.8 4.26 5.08 8.1 14
Item Number 2600-3001 2600-3003 2600-3005 2600-3008 2600-3011 2600-3014
Material SpecificationsPart Name Material
Body CF8M
Handle SS304
Stem SS416
Hub Shaft SS416
Bushing P.T.F.E
O Ring EPDM
Lugged Butterfly Valves Lever Handle 50nb -200nb
Fire Sprinklers
Distributed By: www.ampacsafety.net
Ampac Fire Safety is a pending trademark. Due to ongoing development specifications are subject to change without notification.5
Ampac Fire Safety Fire Sprinklers - Hydrants - Hose Reels
Specifications• Factory Installed UL listed Double Tamper Switch
for indoor or outdoor use • CuLus Listed• FM Approved• NYC - DOB MEA 155-06-E
Schematic
Working Pressure• 300 PSI (21.4 bars)
Working Temperature• 600 PSI (42.8 bars)
Corrosion Protection• 250 °F (120 °C)
Material SpecificationsPart Name Material
Body ASTM A-536 Nylon - 11 coated
Disc ASTM A-536 EPDM
Stem AISI 420-SS
Housing ASTM A-536
Hand Wheel ASTM A-536
Flag Indicator ASTM A-536
Sheer Pin ASTM A-510
Segment Gear ASTM B-148 or B-584
Gasket EPDM Grade “E”
O-Rings EPDM Grade “E”
Globe - R/G Butterfly Valves with Monitor - 65 - 200NB
SpecificationsSize (mm) 76.1mm 3” 4” 165.1mm 8”
A 5.31 5.59 6.88 8.25 9.22
B 5.06 5.06 5.06 8.66 8.66
C 4.13 4.41 5.71 7.06 8.03
D 3.31 3.61 4.31 5.71 6.71
E 3.81 3.81 4.53 5.22 5.81
Item Number 2600-3023 2600-3024 2600-3025 2600-3026 2600-3027
Fire Sprinklers
Distributed By: www.ampacsafety.net
Ampac Fire Safety is a pending trademark. Due to ongoing development specifications are subject to change without notification.6
Ampac Fire Safety Fire Sprinklers - Hydrants - Hose Reels
Specifications• Vulcanised disc design for bubble tight shut off • Flag type position indicator • Low torque operation , high life cycle• Built in supervisory switch• Top flange to ISO5211/1• Groove ends to AWWA C606• UL Listed• FM approved
Schematic
Working Pressure• 300 PSI
Working Temperature• -10°C to + 82°C
Corrosion Protection• Fusion bonded Epoxy coated Interior and
Exterior to AWWA C550
SpecificationsSize (mm) 50nb 65nb 80nb 100nb
A 77 85 90 108
B 99 112 115 145
C 120 120 120 120
D 90 90 90 90
E 84 97 97 116
F 170 170 170 170
G 65 65 65 65
H 155 155 155 155
L 150 150 150 150
M 200 200 200 200
Weight Kg
Item Number 2600-3002 2600-3004 GL 2600-3006 GL 2600-3009 GL
Material SpecificationsPart Name Material ASTM Spec
Body Ductile Iron A536 65-45-12
Wedge Ductile Iron EPDM Encapsulated
Shaft Stainless Steel AISI 431
Bushing Brass C67400
Gearbox Housing Cast Iron A126 Class B
Gearbox Cover Cast Iron A126 Class B
Wormgear Bronze C62300
Worm Stainless Steel AISI 316
Handwheel Cast Iron A126 Class B
Weflo R/G Butterfly Valves with Monitor 50 -100nb
Fire Sprinklers
Distributed By: www.ampacsafety.net
Ampac Fire Safety is a pending trademark. Due to ongoing development specifications are subject to change without notification.7
Ampac Fire Safety Fire Sprinklers - Hydrants - Hose Reels
Specifications• Equivalent feet of pipe: 2”, 2 1/2” & 3” valves =
7.2 feet, 4” valve = 9.9 feet, 6” valve = 16.1 feet, 8” valve = feet
• NYC-DOB MEA 305-05-E• cULus Listed• FM Approved
Schematic
Working Pressure• 300 psi (20.7 bars)• Factory tested to Hydrostatically to 600 psi (41.4)
Working Temperature
Corrosion Protection
Material SpecificationsPart Name Material
Hinge Pin Stainless steel
Torsion Spring Stainless steel
Machined Body (DIN) Cast Iron
1/2”NPT Plug Cast Iron
Seat Ring Brass
Locknut Stainless Steel
Nameplate Aluminium
Clapper Stainless Steel, EPDM
Sealing Washer Hard Fiber
Disc Retainer Stainless Steel
Hex Head Bolt Stainless Steel
Globe RCV Swing Check Valve Standard
Specifications
Size A B C Weight (kg) Item Number
2” 10” 8 3/4” 2 1/4” 2.04 2600-4045
65mm 11” 9 1/4 “ 2 1/4” 3.62 2600-4046
3” 12” 9 1/2” 2 1/2” 5.44 2600-4047
4” 13 1/2” 10” 3 1/4” 7.94 2600-4048
150mm 14 1/4” 10 3/4” 4” 18.37 2600-4049
8” 15 1/4” 12 1/4” 5” 33.57 2600-TBA
Fire Sprinklers
Distributed By: www.ampacsafety.net
Ampac Fire Safety is a pending trademark. Due to ongoing development specifications are subject to change without notification.8
Ampac Fire Safety Fire Sprinklers - Hydrants - Hose Reels
Specifications• Equivalent feet of pipe: 2”, 2 1/2” & 3” valves =
7.2 feet, 4” valve = 9.9 feet, 6” valve = 16.1 feet, 8” valve = feet
• NYC-DOB MEA 305-05-E• cULus Listed• FM Approved
Schematic
Working Pressure• 300 psi (20.7 bars)
• Factory tested to Hydrostatically to 600 psi (41.4)
Working Temperature
Corrosion Protection
Globe RCV Swing Check Valve Shotgun
Material SpecificationsPart Name Material
Hinge Pin Stainless steel
Torsion Spring Stainless steel
Machined Body (DIN) Cast Iron
1/2”NPT Plug Cast Iron
Seat Ring Brass
Locknut Stainless Steel
Nameplate Aluminium
Clapper Stainless Steel, EPDM
Sealing Washer Hard Fiber
Disc Retainer Stainless Steel
Hex Head Bolt Stainless Steel
Specifications
Size A B C Weight (kg) Item Number
2” 10” 8 3/4” 2 1/4” 2.04 2600-4031
65mm 11” 9 1/4 “ 2 1/4” 3.62 2600-4032
3” 12” 9 1/2” 2 1/2” 5.44 2600-4033
4” 13 1/2” 10” 3 1/4” 7.94 2600-4034
150mm 14 1/4” 10 3/4” 4” 18.37 2600-4035
8” 15 1/4” 12 1/4” 5” 33.57 2600-TBA
Fire Sprinklers
Distributed By: www.ampacsafety.net
Ampac Fire Safety is a pending trademark. Due to ongoing development specifications are subject to change without notification.9
Ampac Fire Safety Fire Sprinklers - Hydrants - Hose Reels
Specifications• UL Listed and FM Approved• Full Waterway design • Seatingb type is resilient Material to bronze seat
construction• Ductile Iron disk. EPDM Encapsulated• Groove ends to AWWA C606 Standard or Metric
Schematic
Working Pressure• 300 PSI
Working Temperature• -10°C to +82°C
Corrosion Protection• Fusion bonded epoxy coated interior and
exterior to AWWA C550 Standard
SpecificationsSize (inches) 2.5” 3” 4” 6” 8”
OD (mm) 76.1 88.9 114.3 165.1 219.1
L 203 213 245 292 356
H 74.5 78 102 133.5 160
Item Number 2600-4016 2600-4018 2600-4020 2600-4022 2600-4024
Material SpecificationsPart Name Material ASTM Spec.
Body Ductile Iron A536 65-45-12
Seat Ring Bronze B62 C83600
Disc DI and rubber encapsulated
A536-65-45-12 EPDM
Spindle Stainless Steel AISI 316
Spring Stainless Steel AISI 304
Plug Stainless Steel AISI 304
Washer Rubber EPDM
Weflo Swing Check Valves Grooved Ends
Fire Sprinklers
Distributed By: www.ampacsafety.net
Ampac Fire Safety is a pending trademark. Due to ongoing development specifications are subject to change without notification.10
Ampac Fire Safety Fire Sprinklers - Hydrants - Hose Reels
Specifications• Flange AS2129T/E• Applications: Oil , Water , Gas
Schematic
Working Pressure• Cold Working pressure 1600 kPa
Working Temperature• Max Working Temperature 80°C Text
Corrosion Protection
SpecificationsSize (mm) 80nb 100nb 150nb 200nb
D 128 160 213 270
D1 94 117 170 224
L 64 64 76 89
Weight Kg 2.8 4.1 8.5 13.5
Item Number 2600-4017 2600-4019 2600-4021 2600-4023
Material SpecificationsPart Name Material
Body Cast Iron
Spring 316 Stainless St
Disc 316 Stainless St
Seat NBR
Shaft 1 316 Stainless St
Shaft 2 316 Stainless St
Flange Gasket NBR
Wafer Check Valves Dual Disc
Fire Sprinklers
Distributed By: www.ampacsafety.net
Ampac Fire Safety is a pending trademark. Due to ongoing development specifications are subject to change without notification.11
Ampac Fire Safety Fire Sprinklers - Hydrants - Hose Reels
Specifications• Thread AS1722.1
Schematic
Working Pressure• Cold working Pressure 1380 kPa
Working Temperature• Max 200°C
Corrosion Protection• Fusion bonded epoxy coated interior and
exterior to AWWA C550 Standard
SpecificationsSize (mm) 15nb 20nb 25nb 32nb 40nb 50nb 65nb
H 34 37 45 50 60 70 85
L 52 60 74 82 95 107 153
Weight Kg 0.18 0.26 0.39 0.59 0.91 1.22 2.21
Item Number 2600-4001 2600-4003 2600-4005 2600-4008 2600-4010 2600-4012 2600-4015
Material SpecificationsPart Name Material
Body Brass
Bonnet Brass
Hinge Pin -Nut Brass
Brass Swing Check Valves
Fire Sprinklers
Distributed By: www.ampacsafety.net
Ampac Fire Safety is a pending trademark. Due to ongoing development specifications are subject to change without notification.12
Ampac Fire Safety Fire Sprinklers - Hydrants - Hose Reels
Specifications• Applications: Can be installed Horizontal Vertical
or oblique positions• Suitable for Hot/ Cold water , Compressed Air ,
oils• Thread AS1722.1
Schematic
Working Pressure• Cold working Pressure 1380 kPa
Working Temperature• 0- 90 °C Water • -20°C - 60°C Gas • -20°C -110°C Air
Corrosion Protection• Fusion bonded epoxy coated interior and
exterior to AWWA C550 Standard
SpecificationsSize (mm) 15nb 20nb 25nb 32nb 40nb 50nb
H 47 53 58 66.5 68 77
L 34.5 42 47.5 59.5 68 86.5
Weight Kg 0.14 0.2 0.27 0.36 0.57 0.77
kPa 1172 1172 1172 965 965 965
Item Number 2600-4002 2600-4004 2600-4006 2600-4009 2600-4011 2600-4013
Material SpecificationsPart Name Material
Body Brass CW617N
Stem Seat Nylon 6
Seat NBR 60 SH/A
Spring Stainless Steel AISI 302
Brass Spring “Y Type” Check Valves
Fire Sprinklers
Distributed By: www.ampacsafety.net
Ampac Fire Safety is a pending trademark. Due to ongoing development specifications are subject to change without notification.13
Ampac Fire Safety Fire Sprinklers - Hydrants - Hose Reels
Specifications• Thread ISO 228• Applications : Water , Oil , Gas , Irrigation
Schematic
Working Pressure• Max Workling Pressure 1600kPa
Working Temperature• Max Working Temperature 180°C
Corrosion Protection• Text
SpecificationsSize (mm) 15nb 20nb 25nb 32nb 40nb 50nb 65nb
L 43 48 57 63 65 78 85
H 85 100 120 145 155 190 220
W 50 50 58 77 77 97 97
Weight Kg 0.27 0.39 0.53 0.71 0.89 1.27 2.28
Item Number 2600-5001 2600-5002 2600-5003 2600-5004 2600-5005 2600-5006 2600-5007
Material SpecificationsPart Name Material
Body Bronze
Bonnet Bronze
Wedge Bronze
Stem Bronze
Hand Wheel Ductile Iron
Brass Gate Valves (Screwed)
Fire Sprinklers
Distributed By: www.ampacsafety.net
Ampac Fire Safety is a pending trademark. Due to ongoing development specifications are subject to change without notification.14
Ampac Fire Safety Fire Sprinklers - Hydrants - Hose Reels
Specifications• Complies with AWWA C515 Standard• Heavy Duty handwheel and attchment nut • High Quality graphite stem seal • NPT plug on body• Groove ends to AWWA C606 Standard or metric
dimensions • UL Listed and FM approved
Schematic
Working Pressure• 300 PSI
Working Temperature• -10°C to +82 °C
Corrosion Protection• Fusion Bonded Epoxy Coated Interior & Exterior
to AWWA C550 Standard
SpecificationsSize (mm) 65nb 80nb 100nb 150nb 200nb
OD 76.1 88.9 114.3 165.1 219.1
L 190.5 203 229 267 292
H (Open) 415 480 550 740 930
H (Close) 350 400 450 590 730
D 184 254 254 305 356
Weight Kg 13.3 17.5 28 43.5 68
Item Number 2600-5008 2600-5012 2600-5014 2600-5016 2600-5018
Material SpecificationsPart Name Material ASTM Spec.
Body Ductile Iron A536 65-45-12
Wedge Ductile Iron EPDM Encapsulated
Wedge Nut Stainless Steel AISI 304
Stem Stainless Steel AISI 420
Bonnet Ductile Iron A536 65-45-12
Gasket Rubber EPDM
Packing Graphite Commercial
Gland Ductile Iron A536 65-45-12
Yoke Nut Bronze B62 C83600
Hand Wheel Ductile Iron A536 65-45-12
Hand Wheel Nut Ductile Iron A536 65-45-12
NPT Plug Mallable Iron Commercial
Gland Bolt Stainless Steel AISI 316
Bonnet Bolt Carbon Steel A307 B
Weflo Gate Valve OS&Y Roll Groove
Fire Sprinklers
Distributed By: www.ampacsafety.net
Ampac Fire Safety is a pending trademark. Due to ongoing development specifications are subject to change without notification.15
Ampac Fire Safety Fire Sprinklers - Hydrants - Hose Reels
Specifications• Complies with AWWA C515 Standard• Heavy Duty handwheel and attchment nut • High Quality graphite stem seal • NPT plug on body• Groove ends to AWWA C606 Standard or metric
dimensions • UL Listed and FM approved
Schematic
Working Pressure• 300 PSI
Working Temperature• -10°C to +82 °C
Corrosion Protection• Fusion Bonded Epoxy Coated Interior & Exterior
to AWWA C550 Standard
Specifications
Size (mm) 65nb
OD 76.1
L 190.5
H (Open) 415
H (Close) 350
D 184
Weight Kg 20
Item Number 2600-5009
Material SpecificationsPart Name Material ASTM Spec.
Body Ductile Iron A536 65-45-12
Wedge Ductile Iron EPDM Encapsulated
Wedge Nut Stainless Steel AISI 304
Stem Stainless Steel AISI 420
Bonnet Ductile Iron A536 65-45-12
Gasket Rubber EPDM
Packing Graphite Commercial
Gland Ductile Iron A536 65-45-12
Yoke Nut Bronze B62 C83600
Hand Wheel Ductile Iron A536 65-45-12
Hand Wheel Nut Ductile Iron A536 65-45-12
NPT Plug Mallable Iron Commercial
Gland Bolt Stainless Steel AISI 316
Bonnet Bolt Carbon Steel A307 B
Gate Valve OS&Y Flange Table D
Fire Sprinklers
Distributed By: www.ampacsafety.net
Ampac Fire Safety is a pending trademark. Due to ongoing development specifications are subject to change without notification.16
Ampac Fire Safety Fire Sprinklers - Hydrants - Hose Reels
Specifications• Complies with AWWA C515 Standard• Heavy Duty handwheel and attchment nut • High Quality graphite stem seal • NPT plug on body• Flanges to ANSI B16 .1 Class 125• UL Listed and FM approved
Schematic
Working Pressure• 300 PSI
Working Temperature• -10°C to +82 °C
Corrosion Protection• Fusion Bonded Epoxy Coated Interior & Exterior
to AWWA C550 Standard
SpecificationsSize (mm) 80nb 100nb 150nb 200nb
L 203 229 267 292
H (Open) 480 550 740 930
H (Close) 400 450 590 730
D 254 254 305 356
Weight Kg 25 30 50 77
Item Number 2600-5011 2600-5013 2600-5015 2600-5017
Material SpecificationsPart Name Material ASTM Spec.
Body Ductile Iron A536 65-45-12
Wedge Ductile Iron EPDM Encapsulated
Wedge Nut Stainless Steel AISI 304
Stem Stainless Steel AISI 420
Bonnet Ductile Iron A536 65-45-12
Gasket Rubber EPDM
Packing Graphite Commercial
Gland Ductile Iron A536 65-45-12
Yoke Nut Bronze B62 C83600
Hand Wheel Ductile Iron A536 65-45-12
Hand Wheel Nut Ductile Iron A536 65-45-12
NPT Plug Mallable Iron Commercial
Gland Bolt Stainless Steel AISI 316
Bonnet Bolt Carbon Steel A307 B
Gate Valve OS&Y Flange Table E
Fire Sprinklers
Distributed By: www.ampacsafety.net
Ampac Fire Safety is a pending trademark. Due to ongoing development specifications are subject to change without notification.17
Ampac Fire Safety Fire Sprinklers - Hydrants - Hose Reels
Specifications• Applications Hot/ Cold Water, Various Oils,
Chemicals & Compressed Air • Thread AS1722.2
Schematic
Working Pressure• 2500 kPa
Working Temperature• Cold Working Temperature 150°C Max
Corrosion Protection• Brass Chromium Plated
SpecificationsSize (mm) 10nb 15nb 20nb
L 49.5 60 66.5
H 35 39 43
W 85 95 115
A 16 16.5 18
Weight Kg 0.14 0.2 0.3
Item Number 2600-6004 2600-6006 2600-6008
Material SpecificationsPart Name Material
Body Brass Nickel Plated
Seat Retainer Brass Nickel Plated
Seat P.T.F.E
Ball Brass Chromium Plated
Stem Brass
Gland Brass
Packing Viton Double O Ring
Lever Stainless Steel Plastic Coated
lever Retaining nut Brass Nikel Plated
General Purpose M/F Brass Ball Valves
Fire Sprinklers
Distributed By: www.ampacsafety.net
Ampac Fire Safety is a pending trademark. Due to ongoing development specifications are subject to change without notification.18
Ampac Fire Safety Fire Sprinklers - Hydrants - Hose Reels
Specifications• Applications Hot/ Cold Water, Various Oils,
Chemicals & Compressed Air • Thread AS1722.2
Schematic
Working Pressure• Cold working pressure 2500 kPa
Working Temperature• Max 150°C
Corrosion Protection• Brass Chromium Plated
SpecificationsSize (mm) 10nb 15nb 20nb
L 41 45 53
H 36 41 46
W 20 22 26
Weight Kg 0.08 0.11 0.21
Item Number 2600-6004 2600-6006 2600-6008
Material Specifications
Part Name Material
Body Brass Nickel Plated
Seat Retainer Brass Nickel Plated
Seat P.T.F.E
Ball Brass Chromium Plated
Stem Brass
Gland Brass
Packing Viton Double O Ring
Lever Stainless Steel Plastic Coated
lever Retaining nut Brass Nikel Plated
Mini Brass Ball Valves F/F
Fire Sprinklers
Distributed By: www.ampacsafety.net
Ampac Fire Safety is a pending trademark. Due to ongoing development specifications are subject to change without notification.19
Ampac Fire Safety Fire Sprinklers - Hydrants - Hose Reels
Specifications• Applications Filtering Fluid to protect inline
Valving • Thread AS1722.2
Schematic
Working Pressure• Cold working pressure 1600 kPa
Working Temperature• Max 100°C
Corrosion Protection
SpecificationsSize (mm) 15nb 20nb 25nb 32nb 40nb 50nb
L 65 80 96 104 116 140
H 34 42 48 55 66 74
Mesh Diameter 0.8 0.8 0.8 0.8 0.8 0.8
Mesh Centre to Centre 1 1 1 1 1 1
Weight Kg 0.23 0.35 0.59 0.83 1.19 1.95
Item Number 2600-8001 2600-8002 2600-8003 2600-8004 2600-8005 2600-8007
Material SpecificationsPart Name Material
Body Brass
Mesh 304 Stainless Steel
Brass Y Strainer