Valve Product Solutions Catalog

8/12/2019 Valve Product Solutions Catalog

1/144

Valve Product Solutions

Needle Valves

Manifold Valves

2-Valve Static Pressure& Liquid Level

3-Valve Differential Pressure

5-Valve Natural Gas

Accessories


2/144

NOSHOK is an ISO 9001:2008 registered company.

NOSHOK is a member and actively suppor ts:

At NOSHOK, we pride ourselves on being innovators in the industry bycontinually offering the latest technology and measurement solutions, and providing

the best customer support in the marketplace.

over 45 years, and as we have expanded our product offering we continue to provide

to offer corrosion-resistant zinc nickel plating standard on our carbon steel valves.

solution together.

NOSHOK is committed to providing excellence on every level. Thank you for choosingNOSHOK products.

Jeff N. Scott

President

NOSHOK Corporate HeadquartersYour Single Source Instrumentation Company


3/144

3

SUPERIOR CORROSION-RESISTANTZINC-NICKEL PLATING ON ALL

CARBON STEEL NOSHOK VALVES

automotive companies have made the switch to zinc-nickel

plating for their components over the last decade, so we decided

to put this plating to the test for ourselves.

subjected to 1,000+ hours of exposure to a 5% salt spray

(fog) environment in a test chamber operated and maintained

in accordance with ASTM B-117-07a. The zinc-nickel

plated sample showed no visible corrosion on the part

after 1,000+ hours of exposure.

same results after being submerged for 3,500 hours in a 10%

salt solution. The zinc-nickel plated valves far outperformed

the electroless nickel and cobalt plated valves in terms of

corrosion resistance. Because of these impressive results, all

carbon steel NOSHOK needle and manifold valves now utilize

this material as standard plating to withstand and endure in the

harshest environments.

increasingly important for outdoor applications, where

traditional platings have limited performance capabilities. addition to its excellent corrosion resistance (higher than

increased deposit hardness which results in extended wear

Note: Colors may vary due to normal process variation and will

not affect the performance of the valve.

NOSHOK VALVES PATENTED FORSUPERIOR DESIGN

NOSHOK has been awarded a patent for our innovative valve

maintain the integrity of the bonnet threads by segregating them

from the process media. (Patent No. US 7,758,014)

The body seal incorporates a dovetail undercut below the sealthat improves the metal-to-metal contact forces as pressures

These novel design features increase the pressure limits of the

miniature needle valves.

NOSHOK valves are built for maximum durability and

performance in the toughest applications. They are also

available with zinc-nickel plating, which provides one of the

highest levels of corrosion resistance available on the market

today. All NOSHOK valves are 100% helium leak tested to

1 x 10-4ml/s for guaranteed performance and reliability.

NOSHOK valves that incorporate this patented design include

our 100 Series hard seat mini valves, 800/850 Series bleedvalves, all 2-valve block and bleed valves along with 5-valve

manifolds. Watch the video on this patented valve design by

WARRANTY INFORMATION

THE NOSHOK ADVANTAGE

NOSHOKs Three Year Warrantyapplies to all needle and manifold valves. NOSHOK guarantees all products to be free from of evaluation.


4/144

4

Needle/Manifold Valve Warranties; Patented Design; ZnNi Plating ....... 3

Mini, Hard Seat:

100......................................................................................6-13

Mini, Soft Tip:

150 ....................................................................................14-21

Multiport, Hard Seat:

200 ....................................................................................22-25

Multiport, Soft Seat:

300 ....................................................................................26-29

Standard, Hard Seat:

400 ....................................................................................30-35

Standard, Soft Seat:

500 ....................................................................................36-39

Block & Bleed, Hard Seat:

600 ....................................................................................40-43

Block & Bleed, Soft Seat:

700 ....................................................................................44-47

Bleed, Hard Seat & Soft Tip:

800/850 .............................................................................48-51

2-Valve Block & Bleed, Hard Seat:

2070 ..................................................................................52-55

2-Valve Block & Bleed, Soft Seat/Tip:

2170 ..................................................................................56-59

3-Valve Double Block & Bleed, Hard Seat:

3070 ..................................................................................60-63

Handles, Panel Mounts, Plug, Bleed Plug, Bleed Screw,

Packing, Stem Tips .......................................................................... 64-67

NEEDLE VALVES

T A B L E O F C O N T E N T S

WARRANTY INFORMATION & THE NOSHOK ADVANTAGE

NEEDLE VALVE OPTIONS

Delrinand Kalrezare registered trademarks of DuPont

Grafoil


5/144

5

Static Pressure Block & Bleed, Hard & Soft Seat:

2000/2100 .........................................................................68-73

Liquid Level, Hard & Soft Seat:

2020/2120 .........................................................................74-77

Static Pressure Narrow Block & Bleed, Hard & Soft Seat:

200002/210002& 200402/210402 ......................78-81

Static Pressure Mini Block & Bleed, Hard Seat &

2602/2702 .........................................................................82-85

Static Pressure Block & Bleed, Hard Seat &

2603/2703& 2604/2704 .....................................86-89

Meter Manifold, Soft Seat:

2180 ..................................................................................90-93

Differential Pressure, Hard & Soft Seat:

3010/3110 ..........................................................................94-99

3510 .............................................................................100-105

Differential Pressure Mini, Hard Seat &

3610/3710 .....................................................................106-109

Natural Gas, Hard & Soft Seat/Tip:

5030/5130 ......................................................................110-119

5530 .............................................................................120-129

Dielectric Kit, Futbols, Manifold Mounting Kit, Pressure to Static Plate,

Static Adapters ............................................................................130-133

2000, 3000, & 5000 .......................................................134-135

Needle & Manifold Valve Reference Information ....................136-141

MANIFOLD VALVES, 2-VALVE



MANIFOLD VALVE ACCESSORIES

MOUNTING DIAGRAMS FOR MANIFOLD VALVES

without prior notice.

T A B L E O F C O N T E N T S

Avai labl e in:


6/144

6

Mini, Hard Seat

100

Compact size valve built for maximum durability and robust performancein the toughest applications

100% helium leak tested to 1 x 10-4ml/s for guaranteed performanceand reliability

Hard seat valves have a maximum pressure of 10,000 psi for stainlesssteel and steel models; 6,000 psi for brass

Available in zinc-nickel plated steel, electropolished stainless steel,and brass

FKM o-ring seal and PTFE back-up ring below the stem threads toprotect from corrosion and galling; PTFE or Grafoilpacking optional

All stems are 316 stainless steel

All stem threads are rolled for strength and ease of operation

Patent

increase the pressure range of the valve(

N e e d l e V a l v e s

Materials Zinc-nickel plated steel, electropolished 316stainless steel, 360 brass

Connections 1/8" NPT, 1/4" NPT, 7/16"-20 UNF-2B, 9/16"-18 UNF-2B Male-male, Male-female, Female-female, in-line

Pressure ratings* Brass: 6,000 psi @ 200 FSteel: 10,000 psi @ 200 F

Stainless steel: 10,000 psi @ 200 F

0.172"

CV0.42

Stem seal & t ype All 316 stainless steel stems with FKM o-ringand PTFE back-up ring below the threads, PTFEor Grafoilpacking optional

Options Panel mountings, o-ring materials, handles, packings,regulating stem and stem tips

SPECIFICATIONS

Compatible Fluid" chart at the back of this catalog.

NOTE:All NOSHOK valve products conform to the MSS SP-99 instrument valves standards, and valves supplied with packingalso conform to MSS SP-132 compression packing systems for instrument valves standard.


7/144

7

options, simply add them to the part number as shown in the diagram below.

NOTE 1:The example shown i ncludes ALL possible addition al options. Please include ONLY the options required for your application when

NOTE 2:When a packing option is selected, an o-ring option is NOT available.

Please note that the standard o-ring in all the NOSHOK mini valves is FKM and the standard handles are brass round knurled (HL3) handles,steel mini T handles (HL1), and 316SS mini T handles (HL1).

ORDERING

INFORMATION

Series ..................................... 100 hard seat

Connection size............................ 1/4"NPT

Valve type ....................Female-female, steel

1 02 FFCEXAMPLE

Series............................................................100 hard seat

Connection size.................................................. 1/4"NPT

Valve type..........................................Female-female, steel

Packing......................................................................PTFE

Stem tip .......................................................... Non-rotating

Panel mount......................................Panel mount (2 nuts)

Handle........................................................1-3/8"Phenolic

1 02 FFC P1 T1 PM2 HL4EXAMPLE with Additional Options

100

Please consult y our local NOSHOK Distribut or or NOSHOK, Inc. for availability and d elivery information.

Please consult you r local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery infor mation.

ORDERING INFORMATION - Addit ional Option s

PACKINGS P1 PTFE P2 Grafoil

STEM TIPS T1 Non-rotating (316 stainless standard) T6 Ball (carbide) T8 Ball (Monel)

T5 Ball (440C stainless) T7 Ball (ceramic) T9

O-RINGS* EM1 EPDM KZ1 FFKM (Kalrez NB1

PANEL MOUNTINGS PM1 Panel mount (1 nut) PM2 Panel mount (2 nuts)

HANDLES HL2 2-1/2" T HL4 1-3/8" PhenolicHL3 HL5 1-3/4" Phenolic

* Available only on EFFB, EFFC and EFFS valve types.

ORDERING INFORMATION

SERIES 1 100 Series, hard seat

CONNECTION 01 1/8" NPT 42 7/16"- 20 UNF-2B*SIZES 02 1/4" NPT 43 9/16"- 18 UNF-2B*

VALVE TYPES MMBMale-Male, Brass

MFC Male-Female, Steel

MFSMale-Female, Stainless Steel MFB Male-Female, Brass EMFC ExtendedMale-Female, Steel EMFS ExtendedMale-Female, Stainless Steel

FFB Female-Female, Brass FFC Female-Female, Steel FFS Female-Female, Stainless SteelEFFB Extended Female-Female, Brass EFFC Extended Female-Female, Steel EFFS Extended Female-Female, Stainless Steel

MMAB Male-Male Angle, Brass MMAC Male-Male Angle, Steel MMAS Male-Male Angle, Stainless SteelMFAB Male-Female Angle, Brass MFAC Male-Female Angle, Steel MFAS Male-Female Angle, Stainless Steel

FFAB Female-Female Angle, Brass FFAC Female-Female Angle, Steel FFAS Female-Female Angle, Stainless Steel

MMC Male-Male, Steel MMS Male-Male, Stainless Steel

the back of this catalog.


8/144

8

Male-Female

Male-Male

1/8" OR

*

1/8" OR

SQ

1/2"

3/4"

SQ

1/2"

DimensionsN e e d l e V a l v e s


9/144

9

DIMENSIONS

1/8" Male-Male Angle

Female-Female

*

1/2"

23/32"

3/4"

1-3/32"

SQ

1/2"

100


10/144

10

7/8"

1/2"

1/4" Male-Male Ang le

1/8" Male-Female Angle

3/4"

1-1/4"

1/2"

1-3/32"

23/32"

3/4"



11/144

11

1-1/4"

7/8"

1/2"

DIMENSIONS


1/8" Female-Female Angle

3/4"

1-1/4"

1-1/4"

7/8"

3/4"

1/2"

100


12/144

12

1/2"


3/4"

1-1/8"

For panel mount, pack

& stem tip dimensions

see pgs. 64-67.



13/144


14/144

14

150 Compact size valve built for maximum durability and robust performance in

the toughest applications

100% helium leak tested to 1 x 10-4ml/s for guaranteed performance andreliability

Soft tip valves feature a patented Delrinnon-rotating soft tip stem, and aback-up metal-to-metal seal

Maximum pressure of 6,000 psi

Available in zinc-nickel plated steel, electropolished stainless steel,and brass

FKM o-ring seal and PTFE back-up ring below the stem threads toprotect from corrosion and galling; PTFE packing optional

All stems are 316 stainless steel

All stem threads are rolled for strength and ease of operation

Patent increase the pressure range of the valve(

Mini, Soft TipN e e d l e V a l v e s

Materials Zinc-nickel plated steel, electropolished 316stainless steel, 360 brass

Connections 1/8" NPT, 1/4" NPT, 7/16"-20 UNF-2B, 9/16"-18 UNF-2B Male-male, Male-female, Female-female, in-line

Pressure rating 6,000 psi @ 200 F

0.172"

CV0.42

Stem seal & t ype All 316 stainless steel stems with FKM o-ringand PTFE back-up ring below the threads,PTFE packing optional

Options Panel mountings, o-ring materials, handles, packings,regulating stem and stem tips

SPECIFICATIONS



15/144

15

Series ..........................................150 soft tip

Connection size.............................1/4"NPT

Valve type ....................Female-female, steel

1 52 FFCEXAMPLE


NOTE 1:The example shown includes ALL pos sible additional opti ons. Please include ONLY the options r equired for your application when


Please note that the standard o-ring in all the NOSHOK mini valves is FKM and the standard handles are brass round knurled handles (HL3),steel 1-3/8" mini T handles (HL7), and 316SS 1-3/8" mini T handles (HL7).

Series.................................................................150 soft tip

Connection size ...................................................1/4"NPT

Valve type..........................................Female-female, steel

Packing......................................................................PTFE

Stem tip ..................................................................PCTFE

Panel mount......................................Panel mount (2 nuts)

Handle....................................................


ORDERING

INFORMATION150

ORDERING INFORMATION - Addit ional Options

PACKINGS P1 PTFE

STEM TIPS T3 PCTFE T10 T12

T4 PEEK T11



HANDLES HL3

Please consult y our local NOSHOK Distribut or or NOSHOK, Inc. for availability and delivery information.

Please consult your local NOSHOK Distribut or or NOSHOK, Inc. for availability and delivery information.

* Available only on EFFB, EFFC and EFFS valve types.


SERIES 1 150 Series, soft tip

CONNECTION 51 1/8" NPT 92 7/16"- 20 UNF-2B*SIZES 52 1/4" NPT 93 9/16"- 18 UNF-2B*

VALVE TYPES MMB Male-Male, Brass MFC Male-Female, Steel MFS Male-Female, Stainless Steel MFB Male-Female, Brass EMFC ExtendedMale-Female, Steel EMFS ExtendedMale-Female, Stainless Steel

FFB Female-Female, Brass FFC Female-Female, Steel FFS Female-Female, Stainless SteelEFFB Extended Female-Female, Brass EFFC Extended Female-Female, Steel EFFS Extended Female-Female, Stainless Steel

MMAB Male-Male Angle, Brass MMAC Male-Male Angle, Steel MMAS Male-Male Angle, Stainless SteelMFAB Male-Female Angle, Brass MFAC Male-Female Angle, Steel MFAS Male-Female Angle, Stainless Steel

FFAB Female-Female Angle, Brass FFAC Female-Female Angle, Steel FFAS Female-Female Angle, Stainless Steel

MMC Male-Male, Steel MMS Male-Male, Stainless Steel


16/144

16

Male-Female

Male-Male

1/8" OR

*

1/8" OR

SQ

1/2"

3/4"

SQ

1/2"



17/144

17

DIMENSIONS

1/8" Male-Male Angle

Female-Female

*

1/2"

23/32"

3/4"

1-3/32"

SQ

1/2"

150


18/144

18

7/8"

1/2"

1/4" Male-Male Ang le


3/4"

1-1/4"

1/2"

1-3/32"

23/32"

3/4"



19/144

19

1-1/4"

7/8"

1/2"

DIMENSIONS



3/4"

1-1/4"

1-1/4"

7/8"

3/4"

1/2"

150


20/144

20

1/2"


3/4"

1-1/8"




see pgs. 64-67.


21/144

21

DIMENSIONS

Option With PackingMini, Soft Tip

1Mini valve body2FKM o-ring3PTFE back-up ring4Soft tip stem5Mini valve bonnet6Mini valve T handle7Set screw

1

2

3

4

5

6

7

1Soft tip packing stem2Mini valve packing bonnet3Packing washer4Packing5Packing washer6Jam nut7 Packing adjustment screw

1

2

3

4

5

7

6

150


22/144

22

Multiport design reduces the number of gauge and other instrumentconnections to permanent piping installations, decreasing possibleleak paths

Optional bleed plugs further allow pressure to be bled off without disturbingthe permanent piping installation


10,000 psi pressure rating @ 200 F Blow-out proof stem provides a secondary stem seal in the full

open position FKM o-ring seal and PTFE back-up ring below the stem threads to

protect from corrosion and galling; PTFE or Grafoilpacking optional All stems are 316 stainless steel All stem threads are rolled for strength and ease of operation One-piece bonnet with a metal-to-metal seal to the valve body below the

bonnet threads Slotted spring pin to prevent accidental loosening Vinyl dust cap for bonnet and stem (non-packing)

Materials Zinc-nickel plated steel, electropolished 316 stainless steel

Connections 1/2" NPT to 3/4" NPT Male-female

Pressure rating* 10,000 psi @ 200 F

0.187"

CV0.44

Stem seal & type All 316 stainless steel stems with FKM o-ring andPTFE back-up ring below thethreads, PTFE orGrafoilpacking optional

Options Panel mountings, o-ring materials, handles,packings, regulating stem and stem tips

SPECIFICATIONS

200

Multiport, Hard SeatN e e d l e V a l v e s

Note:Shown with optional bleed plug.




23/144

23

ORDERING

INFORMATION200

Series..............................200 hard seat

Connection size.................... 1/2" NPT

Valve type................Male-female, steel

2 04 MFCEXAMPLE






CONNECTION SIZES 04 1/2" NPT 0604 3/4" NPT male - 1/2" NPT female

VALVE TYPES MFC Male-Female, Steel MFS Male-Female, Stainless Steel


Series.................................. 200 hard seat

Connection size.........................1/2" NPT

Valve type....................Male-female, steel

Stem tip................... Ball (440C stainless)

O-ring..............................................EPDM

2 04 MFC T5 EM1EXAMPLE with Additional Options

NOTE: Plugs and bl eed plugs are available and can be ordered separately, see page 65.

Please note that the standard o-ring in all the NOSHOK valves is FKM and the standard handles are T handles (HL2).

Please consult your local NOSHOK Distribut or or NOSHOK, Inc. for availability and delivery information.



STEM TIPS T1 Non-rotating (316 stainless) T6 Ball (carbide) T8 Ball (Monel)T5 Ball (440C stainless) T7 Ball (ceramic) T9



HANDLES HL1 1-13/16" Mini T HL4 1-3/8" Phenolic HL5 1-3/4" Phenolic



24/144

24

Male-Female

1/2"

2-5/16"

5-3/8"

2-1/2"

1-3/8"

1-1/4"

SQ.

Side View

Front View




see pgs. 64-67.


25/144

25

1Valve body

2FKM o-ring3PTFE back-up ring4Slotted spring pin5 Valve stem6Valve bonnet7Dust cap8Valve T handle9Set screw

DIMENSIONS

1

2

3

4

5

6

7

8

9

Option With PackingMultiport , Hard Seat

200

1Valve packing stem

2Valve packing bonnet3 Packing washer4 Packing5 Packing washer6Jam nut7Packing adjustment screw

1

2

3

4

6

5

7


26/144

26

300 Multiport design reduces the number of gauge and other instrument

connections to permanent piping installations, decreasing possibleleak paths

Optional bleed plugs further allow pressure to be bled off withoutdisturbing the permanent piping installation


6,000 psi pressure rating @ 200 F seat and straight through porting for bidirectional,

PCTFE or PEEK soft seat optional Blow-out proof stem provides a secondary stem seal in the full


protect from corrosion and galling; PTFE packing optional All stems are 316 stainless steel All stem threads are rolled for strength and ease of operation One-piece bonnet with a metal-to-metal seal to the valve body below

the bonnet threads Slotted spring pin to prevent accidental loosening Vinyl dust cap for bonnet and stem (non-packing)


Connections 1/2" NPT to 3/4" NPT Male-femaleStraight through porting for bidirectional,


0.187"

CV0.64

Stem seal & type All 316 stainless steel stems with FKM o-ring andPTFE back-up ring below thethreads, PTFEpacking optional


SPECIFICATIONS

Multipor t, Soft SeatN e e d l e V a l v e s

Note:Shown with optional bleed plug.



27/144

27

ORDERING

INFORMATION300

Series..............................300 soft seat

Connection size...................1/2" NPT

Valve type..............Male-female, steel

3 04 MFCEXAMPLE


SERIES 3 300 Series, soft seat

CONNECTION SIZES 04 1/2" NPT 0604 3/4" NPT male - 1/2" NPT female


Please consult yo ur local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery info rmation.





Series..............................................300 soft seat

Connection size................................... 1/2" NPT

Valve type.............................. Male-female, steel

Soft seat ....................................................PEEK

Packing .......................................................PTFE

Handle.........................................1-3/4" Phenolic

3 04 MFC PK1 P1 HL5EXAMPLE with Additional Options

NOTE: Plugs and bleed plugs are available and can be ordered separately, see page 65.



SOFT SEATS PK1 PEEK KF1 PCTFE

PACKINGS P1 PTFE

STEM TIPS T1 Non-rotating (316 stainless)



HANDLES HL4 1-3/8" Phenolic HL5 1-3/4" Phenolic


28/144

28

Male-Female

Side View

Front View

1/2"

2-5/16"

5-3/8"

2-1/2"

1-3/8"

1-1/4"

SQ.




see pgs. 64-67.


29/144

29

DIMENSIONS

1 Valve body

2Slotted spring pin 3Delrinseat 4 FKM o-ring 5 PTFE back-up ring 6 Valve stem 7 Valve bonnet 8 Dust cap 9 Valve T handle 10 Set screw

1

2

3

4

5

6

7

8

910

Option With PackingMultiport, Soft Seat

300

1Valve packing stem


1

2

3

4

6

5

7


30/144

30

400 100% helium leak tested to 1 x 10-4ml/s for guaranteed performance

and reliability 10,000 psi pressure rating @ 200 F Blow-out proof stem provides a secondary stem seal in the full


protect from corrosion and galling; PTFE or Grafoilpacking optional(certain NPT sizes only)

All stems are 316 stainless steel All stem threads are rolled for strength and ease of operation One-piece bonnet with a metal-to-metal seal to the valve body below



Connections 1/4", 3/8", 1/2", 3/4", 1", 1-1/4" & 1-1/2" NPT7/16"-20 UNF (#4 SAE, J1926)

Male-female, Female-female, in-line and angled


1/4" - 1/2" NPT: 0.187"3/4" - 1-1/2" NPT: 0.438"

1/4" - 1/2" NPT: CV0.443/4" - 1-1/2" NPT: CV2.70

Stem seal & type All 316 stainless steel stems with FKM o-ring andPTFE back-up ring below thethreads, PTFE orGrafoilpacking optional for 1/4", 3/8" & 1/2" NPT only


SPECIFICATIONS

Standard, Hard SeatN e e d l e V a l v e s




31/144

31

Series.........................400 hard seat

Connection size................1/2" NPT

Valve type...... Female-female, steel

4 04 FFCEXAMPLE

Please consult your l ocal NOSHOK Distri butor or NOSHOK, Inc. for availability and delivery infor mation.



CONNECTION SIZES 02 1/4" NPT 06 3/4" NPT 12 1-1/2" NPT03 3/8" NPT 08 1" NPT 42 7/16"-20 UNF (#4 SAE, J1926)

04 1/2" NPT 10 1-1/4" NPT

VALVE TYPES MFC Male-Female, Steel MFS Male-Female, Stainless SteelFFC Female-Female, Steel FFS Female-Female, Stainless Steel

MFAC Male-Female Angle, Steel MFAS Male-Female Angle, Stainless Steel FFAC Female-Female Angle, Steel FFAS Female-Female Angle, Stainless Steel


NOTE 1: The example shown includes ALL po ssible additional options. Please include ONLY the options required for your application when


NOTE 3:Packing options are NOT available on 3/4 NPT through 1-1/2 NPT valves.


Series...............................................................400 hard seat

Connection size.....................................................1/2" NPT

Valve type............................................ Female-female, steel

Packing.........................................................................PTFE

Stem tip .............................................................Non-rotating

Panel moun t........................................ Panel mount (2 nuts)

Handle ...........................................................1-3/4" Phenolic


The standard o-ring in all the NOSHOK valves is FKM and the standard handles are T handles (HL2).






HANDLES HL4 1-3/8" Phenolic HL5 1-3/4" Phenolic HL9 2-3/8" Phenolic**

For 1/4", 3/8" and 1/2" NPT only.

Packing Style with Compatible Fluid" chart at the back of this catalog.

** For 3/4" NPT to 1-1/2" NPT only.

ORDERING

INFORMATION400


32/144

32 1-3/4"

2-1/2"

1-5/8"

5/8"

1/2"

1-5/8"

2-1/2"

5/8"

1/2"

2-1/2" 1/2"

3-1/2"

3-1/2"

2-1/2" 1/2"

1/4" -1/2" Male-Female1/4" -1/2" Female-Female

1/4" Male-Female Angle1/4" Female-Female Angle


1-3/4"


33/144

33

DIMENSIONS

2-1/2"

2"

5/8"

1/2"

2"

2-1/2"

5/8"

1/2"



2"

2"

400


34/144

34

4-1/4" 3/4"

2-1/8"

5-1/4"

4-1/4" 3/4"

3/4" - 1-1/2" Female-Female

3/4" -1-1/2" Male-Female




see pgs. 64-67.


35/144

35

9

8

7

6

5

4

3

2

1

1Valve body

2FKM o-ring3PTFE back-up ring4Slotted spring pin5 Valve stem6Valve bonnet7Dust cap8Valve T handle9Set screw

DIMENSIONS

1

2

3

4

5

6

7

8

9

Option With PackingStandard, Hard Seat

400

1Valve packing stem


1

2

3

4

6

5

7


36/144

36

500 100% helium leak tested to 1 x 10-4ml/s for guaranteed performance

and reliability 6,000 psi pressure rating @ 200 F seat and straight through porting for bidirectional, high

Blow-out proof stem provides a secondary stem seal in the full open position FKM o-ring seal and PTFE back-up ring below the stem threads to protect from

corrosion and galling; PTFE packing optional (certain NPT sizes only) All stems are 316 stainless steel All stem threads are rolled for strength and ease of operation One-piece bonnet with a metal-to-metal seal to the valve body below the


Materials Zinc-nickel plated steel, electropolished

316 stainless steelConnections 1/4", 3/8", 1/2", 3/4", 1", 1-1/4" & 1-1/2" NPT


1/4" - 1/2" NPT: 0.187"3/4" - 1-1/2" NPT: 0.438"

1/4" - 1/2" NPT: CV0.763/4" - 1-1/2" NPT: CV4.0

Stem seal & type All 316 stainless steel stems with FKM o-ring andPTFE back-up ring below thethreads, PTFEpacking optional for 1/4", 3/8" & 1/2" NPT only


SPECIFICATIONS

Standard, Soft SeatN e e d l e V a l v e s



37/144

37

Series..............................500 soft seat

Connection size ..................1/2" NPT

Valve type..........Female-female, steel

5 04 FFCEXAMPLE



CONNECTION SIZES 02 1/4" NPT 04 1/2" NPT 08 1" NPT 12 1-1/2" NPT03 3/8" NPT 06 3/4" NPT 10 1-1/4" NPT 0402 1/2" NPT male - 1/4" NPT female

VALVE TYPES MFC Male-Female, Steel MFS Male-Female, Stainless SteelFFC Female-Female, Steel FFS Female-Female, Stainless Steel

Please consult yo ur local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery infor mation.


NOTE 1:The example shown includ es ALL possible additional opt ions. Please include ONLY the options r equired for your application when



For 1/4", 3/8" and 1/2" NPT only.

** For 3/4" NPT to 1-1/2" NPT only.




PACKINGS P1 PTFE




HANDLES HL4 1-3/8" Phenolic HL5 1-3/4" Phenolic HL9 2-3/8" Phenolic**

Series.............................................................500 soft seat

Connection size..................................................1/2" NPT

Valve type.........................................Female-female, steel

Soft seat ...................................................................PEEK

Stem tip .........................................................Non-rotating

O-ring..........................FFKM (Kalrez

Panel moun t.....................................Panel mount (2 nuts)

Handle .......................................................1-3/4" Phenolic

5 04 FFC PK1 T1 KZ1 PM2 HL5EXAMPLE with Additi onal Options

ORDERING

INFORMATION500


38/144

38

2-1/2" 1/2"

3-25/32"3-1/2"

3-25/32"3-1/2"

2-1/2" 1/2"

3-1/2"

1-1/4"

1/4" - 1/2" Male-Female

5-1/4"

4-1/4"

2-1/8"

4-1/4"


3/4" - 1-1/2" Male-Female

1/4" - 1/2" Female-Female 3/4" - 1-1/2" Female-Female



see pgs. 64-67.

3/4"

5-1/2"4-3/4"

2-1/2"

3/4"

5-1/2"

4-15/16"

2-1/2"


39/144

39

1Valve body

2Delrinseat 3FKM o-ring 4PTFE back-up ring 5Slotted spring pin 6 Valve stem 7Valve bonnet 8Dust cap 9Valve T handle10Set screw

1

2

3

4

5

6

7

8

9

10

Option With PackingStandard, Soft Seat

DIMENSIONS500

1Valve packing stem


1

2

3

4

6

5

7


40/144

40

600 Block & bleed design allows pressure to be bled off without disturbing the

replacement of instruments


10,000 psi pressure rating @ 200 F Blow-out proof stem provides a secondary stem seal in the full open

position FKM o-ring seal and PTFE back-up ring below the stem threads to

protect from corrosion and galling; PTFE or Grafoilpacking optional All stems are 316 stainless steel All stem threads are rolled for strength and ease of operation One-piece bonnet with a metal-to-metal seal to the valve body below

the bonnet threads Slotted spring pin to prevent accidental loosening Vinyl dust cap for bonnet and stem (non-packing) 0.090" bleed hole located on the bottom is controlled by a

1/4"-20 UNF-2A bleed screw


Connections 1/4" & 1/2" NPT


0.187"

CV0.44



SPECIFICATIONS

Block & Bleed, Hard SeatN e e d l e V a l v e s




41/144

41

Series............................ 600 hard seat

Connection size...................1/4" NPT

Valve type..........Female-female, steel

6 02 FFCEXAMPLE



CONNECTION SIZES 02 1/4" NPT 04 1/2" NPT


FFC Female-Female, Steel FFS Female-Female, Stainless SteelPlease consult yo ur local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery info rmation.


NOTE 1:The example shown includes ALL poss ible additional opti ons. Please include ONLY the options r equired for your application when

NOTE 2: When a packing option is selected, an o-ring option is NOT available.

Please consult y our local NOSHOK Distribut or or NOSHOK, Inc. for availability and delivery information.

Series...............................................600 hard seat

Connection size.....................................1/4" NPT

Valve type............................Female-female, steel

Packing........................................................PTFE

Stem tip .............................................Non-rotating

Panel mount........................Panel mount (2 nuts)

Handle..........................................1-3/4" Phenolic







PANEL MOUNTINGS PM1 Panel mount (1 nut) PM2 Panel mount (2 nuts)HANDLES HL4 1-3/8" Phenolic HL5 1-3/4" Phenolic

ORDERING

INFORMATION600



42/144

42

1-1/4"

15/16"

2-1/2" 1/2"

Male-Female

Female-Female

2-1/2" 1/2"

15/16"

3-1/2"

1-1/4"




see pgs. 64-67.


43/144

43

1Valve body 2Bleedscrew 3FKM o-ring

4 PTFE back-up ring 5 Valve stem 6Valve bonnet 7Dust cap 8Valve T handle 9Set screw10Slotted spring pin

DIMENSIONS

12

3

4

5

6

7

8

9

10

Option With PackingBlock & Bleed, Hard Seat

600

1Valve packing stem2Valve packing bonnet3 Packing washer4 Packing5 Packing washer6Jam nut7Packing adjustment screw

1

2

3

4

6

5

7


44/144

44

700 Block & bleed design allows pressure to be bled off without disturbing the

replacement of instruments


6,000 psi pressure rating @ 200 F seat and straight through porting for bidirectional,


open position FKM o-ring seal and PTFE back-up ring below the stem threads to protect

from corrosion and galling; PTFE packing optional All stems are 316 stainless steel All stem threads are rolled for strength and ease of operation One-piece bonnet with a metal-to-metal seal to the valve body below the

bonnet threads Slotted spring pin to prevent accidental loosening Vinyl dust cap for bonnet and stem (non-packing) 0.090" bleed hole located on the bottom is controlled by a

1/4"-20 UNF-2A bleed screw


Connections 1/4" & 1/2" NPT


0.187"

CV0.76

Stem seal & type All 316 stainless steel stems with FKM o-ring andPTFE back-up ring below thethreads, PTFEpacking optional


SPECIFICATIONS

Block & Bleed, Soft SeatN e e d l e V a l v e s



45/144

45

Series............................700 soft seat

Connection size.................1/4" NPT

Valve type........Female-female, steel

702 FFCEXAMPLE



CONNECTION SIZES 02 1/4" NPT 04 1/2" NPT


FFC Female-Female, Steel FFS Female-Female, Stainless Steel



NOTE 1: The example shown includes ALL possible additional options. Please include ONLY the options required for your application when






PACKINGS P1 PTFE




HANDLES HL4 1-3/8" Phenolic HL5 1-3/4" Phenolic

Series.....................................................700 soft seat

Connection size..........................................1/4" NPT

Valve type.................................Female-female, steel

Soft seat ...........................................................PEEK

Stem tip ..................................................Non-rotating

O-ring............................................................... EPDM

Panel mount............................. Panel mount (2 nuts)

Handle................................................1-3/4" Phenolic

7 02 FFC PK1 T1 EM1 PM2 HL5EXAMPLE with Additi onal Options

ORDERING

INFORMATION700


46/144

46

Male-Female

Female-Female

1-1/4"

15/16"

2-1/2" 1/2"

2-1/2" 1/2"

15/16"

3-1/2"

1-1/4"




see pgs. 64-67.


47/144

47

1Valve body 2Bleedscrew 3 FKM o-ring 4 PTFE back-up ring 5Valve stem 6Valve bonnet 7Dust cap 8Valve T handle

9Set screw10Delrinseat11 Slotted spring pin

DIMENSIONS

7

1

2

3

4

5

6

8

9

10

11

Option With PackingBlock & Bleed, Soft Seat

700

1Valve packing stem2Valve packing bonnet3 Packing washer4 Packing5 Packing washer6Jam nut7Packing adjustment screw

1

2

3

4

6

5

7


48/144


49/144

49

Series..............800/850 hard seat/soft tip

Connection size...... Hard seat 1/4" NPT

Valve type.............................. Male, steel

8 02 MCEXAMPLE


SERIES 8 800/850 Series, hard seat/soft tip

CONNECTION SIZES 02 Hard seat1/4" NPT 52 Delrinsoft tip 1/4" NPT04 Hard seat1/2" NPT 54 Delrinsoft tip 1/2" NPT

VALVE TYPES MC Male, Steel MS Male, Stainless Steel MB Male, Brass

Please consult you r local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery inf ormation.


NOTE 1:The example shown includ es ALL possible additional opti ons. Please include ONLY the options r equired for your application when



Series......................... 800/850 hard seat/soft tip

Connection size..................Hard seat 1/4" NPT

Valve type..........................................Male, steel

Packing......................................................PTFE

Stem tip ..........................................Non-rotating

Handle........................................1-3/4" Phenolic

8 02 MC P1 T1 HL5EXAMPLE with Additional Options

** For 800 Series only.*** For 850 Series only.

Please note that the standard o-ring in all the NOSHOK valves is FKM and the standard handles are 1 round knurled handles (HL3) on brass, and1-3/8 mini T handles (HL7) on stainless steel and steel.


PACKINGS P1 PTFE P2 Grafoil**

STEM TIPS T1 Non-rotating (316 stainless) T4 PEEK*** T7 Ball (ceramic)**T2 Delrin(Acetal )*** T5 Ball (440C stainless)** T8 Ball (Monel)**T3 PCTFE*** T6 Ball (carbide)**


HANDLES HL2 2-1/2" T** HL4 1-3/8" Phenolic** HL5 1-3/4" Phenolic**HL3

ORDERING

INFORMATION800/850



50/144

50

1-3/8"

1/2"

2-13/16"2-1/4"

43/64"

1/2"

.159"

1/4" Bleed Valve

1/2" Bleed Valve

1-3/8"

1/2"

2-31/32"

2-11/16"

27/32"41/64"

.159"




see pgs. 64-67.


51/144

51

1 Valve body 2 FKM o-ring 3 PTFE back-up ring

4 Mini valve stem 5 Minivalve bonnet 6 Set screw 7 Mini T handle

DIMENSIONS

1

2

3

4

5

7

6

Option With Packing, Hard SeatBleed, Hard Seat

800/850

1Mini valve packing stem2Mini valve packing bonnet3 Packing washer4 Packing5 Packing washer6Jam nut7Packing adjustment screw

1

2

3

4

6

5

7

1Soft tip packing stem2Mini valve packing bonnet3Packing washer4Packing5Packing washer6Jam nut7 Packing adjustment screw

1

2

3

4

5

7

6

Option With Packing, Soft Tip


52/144

52

2070 Combines isolating and venting in a single valve, eliminating the need for

disturbing the permanent piping installation

The 1/4" NPT vent plug is located 90 to the left and may be removed


10,000 psi hard seat pressure rating @ 200 F Blow-out proof stem provides a secondary stem seal in the full open

position FKM o-ring seal and PTFE back-up ring below the stem threads to protect

from corrosion and galling; PTFE or Grafoilpacking optional All stems are 316 stainless steel All stem threads are rolled for strength and ease of operation One-piece bonnet with a metal-to-metal seal to the valve body below the


Materials Zinc-nickel plated steel,

electropolished 316 stainless steel

Connection 1/2" & 1/4" NPTMale-female & Female-female


0.187"

CV0.44


Length 4" standard and 5-3/8" extended length available

Options Panel mountings, o-ring materials, handles,

packings, regulating stem and stem tips

SPECIFICATIONS

Flow Schematic

Block & Bleed, Hard SeatN e e d l e V a l v e s , 2 - V a l v e




53/144

53


SERIES 2 2-valve

SEAT 0 Hard seat

PROCESS 7 Block & bleedCONNECTION

CONNECTION 0 1/2" NPT 2 1/4" NPTSIZES

VALVE TYPES MFC Male-Female, Steel FMC Female-Male, Steel FFCR MFCR EFMC Extended Female-Male, Steel EFFC Extended Female-Female, Steel EMFC Extended Male-Female, Steel FMS Female-Male, Stainless Steel FFS Female-Female, Stainless Steel MFS Male-Female, Stainless Steel EFMS Extended Female-Male, Stainless Steel FFSR MFSR FFC Female-Female, Steel EFFS Extended Female-Female, Stainless Steel EMFS Extended Male-Female, Stainless Steel


Series.............................................2-valve

Seat............................................Hard seatProcess connection.......... Block & bleed


Valve type................Female-female, steel

2 0 7 0 FFCEXAMPLE




Please note that the standard o-ring in all the NOSHOK valves is FKM and the standard handles are block T handles (HL2) and bleed mini T handles (HL1).

Series..............................................2-valve

Seat.............................................Hard seat

Process connection........... Block & bleed

Connection size..........................1/2" NPT

Valve type.................Female-female, steel

Packing.............................................PTFE

Stem tip ................................. Non-rotating

Handle...........................

2 0 7 0 FFC P1 T1 HL3EXAMPLE with Additional Options






HANDLES HL1 1-13/16" Mini T HL3 HL5 1-3/4" PhenolicHL2 2-1/2" T HL4 1-3/8" Phenolic

2070ORDERING

INFORMATION



54/144

54

2-5/32"

Male-Female

1-1/4

1/2"

17/64"

5/8"

4"

1-5/8"

1-1/4"

Extended Male-Female

1-1/4

1/2"

17/64"5/8"

3"

1-1/4"

3-17/32"

5-3/8"




see pgs. 64-67.


55/144

55

1Set screw

2 Minivalve T handle3 4Minivalve bonnet

5Mini valve stem 6 Plug 7 Slotted spring pin 8 FKMo-ring 9 PTFE back-up ring 10 Valve stem

11 Valve bonnet 12Blue dust cap

13 Valve T handle 14 Set screw 15 Block and bleed valve body

DIMENSIONS

1

2

3

5

11

10

7

13

6

15

4

9

8

7

12

14

Option With PackingBlock & Bleed, Hard Seat

2070

9

8

1Mini valve packing stem and

valve packing stem2Mini valve packing bonnetand valve packing bonnet

3 Packing washer4 Packing5 Packing washer6Jam nut7Packing adjustment screw

1

2

3

4

6

5

7


56/144

56

2170 Combines isolating and venting in a single valve, eliminating the need for

disturbing the permanent piping installation

The 1/4" NPT vent plug is located 90 to the left and may be removed and


6,000 psi pressure rating @ 200 F seat, and straight through porting for bidirectional,


open position FKM o-ring seal and PTFE back-up ring below the stem threads

to protect from corrosion and galling; PTFE packing optional All stems are 316 stainless steel All stem threads are rolled for strength and ease of operation One-piece bonnet with a metal-to-metal seal to the valve body below


Materials Zinc-nickel plated steel,electropolished 316 stainless steel

Connection 1/2" & 1/4" NPT available, right venting optional


0.187"

CV0.76

Stem seal & type All 316 stainless steel stems with FKM o-ring and

PTFE back-up ring below thethreads, PTFEpacking optional

Length 4" standard and 5-3/8" extended length available


SPECIFICATIONS

Flow Schematic

Block & Bleed, Soft SeatN e e d l e V a l v e s , 2 - V a l v e



57/144

57

Series............................................2-valve

Seat.............................................Soft seat

Process connection..........Block & bleed

Connection size........................ 1/2" NPT

Valve type............... Female-female, steel

2 1 7 0 FFCEXAMPLE


SERIES 2 2-valve

SEAT 1 Soft seat






NOTE 1:The example shown includes ALL poss ible additional opti ons. Please include ONLY the options r equired for your application when



Please note that the standard o-ring in all the NOSHOK valves is FKM and the standard handles are block T handles (HL2) and bleed 1-3/8" mini T handle (HL7



PACKINGS P1 PTFE

STEM TIPS T1 Non-rotating(316 stainless)



Series......................................................2-valve

Seat .......................................................Soft seat

Process connection....................Block & bleed

Connection size.................................. 1/2" NPT

Valve type......................... Female-female, steel

Soft seat ...................................................PEEK

Packing......................................................PTFE

Stem tip ..........................................Non-rotating

2 1 7 0 FFC PK1 P1 T1EXAMPLE with Additional Options

ORDERING

INFORMATION2170


58/144

58

Male-Female

Extended Male-Female

1-1/4

1/2"

17/64"

5/8"

4"

1-5/8"

1-1/4"

1-1/4

1/2"

17/64"5/8"

3"

1-1/4"

3-17/32"

5-3/8"

DimensionsN e e d l e V a l v e s , 2 - V a l v e



see pgs. 64-67.

2-5/32"


59/144

59

1 Set screw 2 Minivalve T handle

3 4 Minivalve bonnet 5 Soft tip stem 6 Plug 7 Slotted spring pin 8 Delrinseat 9 FKM o-ring10 PTFEback-up ring11 Valve stem12 Valve bonnet13 Blue dust cap14 Valve T handle15 Set screw16 Block and bleed valve body

DIMENSIONS

3

5

7

14

13

9

16

15

12

7

8

11

4

1

2

9

6

10

Option With PackingBlock & Bleed, Soft Seat

10

2170

1Soft tip packing stem andvalve packing stem

2Mini valve packing bonnetand valve packing bonnet3Packing washer4Packing5Packing washer6Jam nut7 Packing adjustment screw

1

2

3

4

5

7

6


60/144


61/144

61

ORDERING

INFORMATION


SERIES 3 3-valve

SEAT 0 Hard seat




Please consult y our local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery info rmation.

Series.............................................3-valve

Seat............................................Hard seatProcess connection.......... Block & bleed


Valve type................Female-female, steel

3 0 7 0 FFCEXAMPLE




Please note that the standard o-ring in all the NOSHOK valves is FKM and the standard handles are block T handles (HL2) and bleed 1-3/8" mini T handle (HL

Series..............................................3-valve

Seat.............................................Hard seat

Process connection........... Block & bleed

Connection size..........................1/2" NPT

Valve type.................Female-female, steel

Packing.............................................PTFE

Stem tip ................................. Non-rotating

Handle...........................

3 0 7 0 FFC P1 T1 HL3EXAMPLE with Additional Options







3070



62/144

62

Male-Female

2-1/2"

2-3/16"

3-9/32"

1-13/16"

1-3/8"

7/16"

23/64"

1-1/2"

4"

2-1/2"

Top View

Front View

Side View

DimensionsN e e d l e V a l v e s , 2 - V a l v e



see pgs. 64-67.

1/2"

1/2"


63/144

63

DIMENSIONS

1 Set screw 2Mini valve T handle 3 4 Mini valve bonnet 5 Mini valve stem

6Valve body 7Slotted spring pin 8Valve T handle 9Set screw 10Blue dust cap 11Valve bonnet 12Valve stem 13PTFE back-up ring 14FKM o-ring

1

2

8

5

10

9

7

11

13

6

12

3

4

14

Option With PackingDouble Block & Bleed, Hard Seat

13

14

3070

1Mini valve packing stemand valve packing stem

2Mini valve packing bonnetand valve packing bonnet

3 Packing washer4 Packing5 Packing washer6Jam nut7Packing adjustment screw

1

2

3

4

6

5

7


64/144

64

Knurled Handle HL3 Phenolic Handle HL5Phenolic Handle HL4

3/8"1-3/4"

1-1/16"

1/4"

Phenolic Handle HL9

PART NUMBER MATERIAL

HL3-CS1-ZN1 Steel

HL3-SS1-EP Stainless steel


HL4-PH1 Phenolic


HL5-PH1 Phenolic


HL9-PH1 Phenolic

Needle Valve Options

13/32

27/32

1-1/16

1/2


65/144

65

17/64"

31/32"

31/32"

Plug

11/64"

1/2"

3/16"

Bleed Plug Bleed Screw


PG1-CS1-PL Steel

PG1-SS1-EP Stainless steel


BP1-CS1-PL Steel

BP1-SS1-EP Stainless steel


66/144

66

Needle Valve Options

1/2"

7/8"

1/8"

15/16

.16

5/8

Panel Moun t Detail, Min i Valves

1/2"

1-1/32"

3/16"

15/16

.16

5/8

Panel Mount Detail, Needle Valves

Packing, Mini Valves

Packing, Needle Valves


67/144

67

Stem Tip Options

NOTE:


68/144

68

Combines isolating and venting in a single valve, eliminating the need for

gauges to be removed without disturbing the permanent pipinginstallation

Block valve is located on the left side and the bleed valve is located on topin a 90 orientation, venting is to the right


2000 Series hard seat valves have 10,000 psi pressure rating @ 200 F 2100 Series soft seat valves have 6,000 psi pressure rating @ 200 F 2100 Series valve also features a replaceable Delrinseat, and straight

roddable cleaning

Blow-out proof stem provides a secondary stem seal in the fullopen position

FKM o-ring seal and PTFE back-up ring below the stem threads to protectfrom corrosion and galling; PTFE or Grafoilpacking optional

All stems are 316 stainless steel Stem and bonnet threads are rolled for strength and ease of operation One-piece bonnet with a metal-to-metal seal to the valve body below

the bonnet threads Slotted spring pin to prevent accidental loosening Vinyl dust caps for bonnets and stems (non-packing) Zinc-nickel plated high tensile strength 4140 steel mounting bolts included


Connection

Pressure ratings* Hard seat: 10,000 psi @ 200 FSoft seat: 6,000 psi @ 200 F

0.187"

Hard seat: CV0.44 Soft seat: CV0.76

Stem seal & type All 316 stainless steel stems with FKM o-ring and

PTFE back-up ring below thethreads, PTFE orGrafoilpacking optional


SPECIFICATIONS

Flow Schematic

2000/2100

Note:Packing option shown.

Block & Bleed, Hard Seat & Soft SeatM a n i f o l d V a l v e s , 2 - V a l v e S t a t i c P r e s s u r e




69/144

69

Series.......................................................2-valve

Seat ........................................................Soft seat

Process type...............................Static pressure

Connection.............

Valve type........................... Flange-female, steel

2 1 0 0 MFCEXAMPLE


SERIES 2 2-valve

SEATS 0 Hard seat 1 Soft seat

PROCESS TYPE 0 Static pressure

CONNECTIONS 0 2 1/4" NPT

VALVE TYPES MFC Flange-Female, Steel MFS Flange-Female,Stainless Steel MMC Flange-Flange, SteelFFC Female-Female, Steel FFS Female-Female, Stainless Steel MMS Flange-Flange, Stainless Steel


2000/2100




NOTE 3:T1 Hard non-rotating (316 SS standard) stem tip is the only option available on the 2100 Series soft seat version.


** For 2000 Series only.


Series.............................................................2-valve

Seat.............................................................Soft seat

Process type.....................................Static pressure

Connection...................

Valve type.................................Flange-female, steel

Soft seat ..........................................................PEEK

Packing............................................................PTFE

2 1 0 0 MFC PK1 P1EXAMPLE with Additional Options




STEM TIPS T1 Non-rotating (316 stainless) T6 Ball (carbide)** T8 Ball (Monel)**T5 Ball (440C stainless)** T7 Ball (ceramic)** T9


HANDLES HL1 1-13/16" Mini T HL4 1-3/8" PhenolicHL3 HL5 1-3/4" Phenolic

ORDERING

INFORMATION



70/144

70

Flange-Flange

3-3/8"

2-5/32"

2-1/8"

2-1/2"

2-1/2"

1-1/8"

2-7/16"

1-5/8"

1-21/32"

3-3/4"

1-1/4"

Side View

Top View

DimensionsM a n i f o l d V a l v e s , 2 - V a l v e S t a t i c P r e s s u r e


71/144

71

3-3/8"

2-5/32"

2-1/8"

2-1/2"

2-1/2"

1-1/8"

2-7/16"

1-5/8"

1-21/32"

3-3/4"

1-1/4"

Flange-Female

DIMENSIONS

Side View

Top View

2000/2100


72/144


73/144

73

DIMENSIONS

1 Valve body 2Slotted spring pin

3Gasket ring 4PTFE back-up ring 5Valve bonnet 6 7ValveT handle 8 Set screw 9Valve stem10FKM o-ring11 Delrinseat12Head bolt13Plug14Blue dust cap

1

2

3

4

5

67

8

9

10

11

12

13

14

Hard Seat Soft Seat

2000/2100

1

2

3

4

5

6

7

8

9

10

1112

13

1 Valve body 2Head bolt

3Gasket ring 4Slotted spring pin 5Valve stem 6Valve bonnet 7 8 Valve T handle 9Set screw10 PTFE back-up ring11 FKM o-ring

12 Plug13Blue dust cap


74/144

74

level applications

direct installation

100% helium leak tested to 1 x 10-4ml/s for guaranteedperformance and reliability

2020 Series hard seat valves have 10,000 psi pressure rating @ 200 F 2120 Series soft seat valves have 6,000 psi pressure rating @ 200 F 2120 Series valves also feature a replaceable Delrinseat, and

roddable cleaning

Blow-out proof stem provides a secondary stem seal in the fullopen position

FKM o-ring seal and PTFE back-up ring below the stem threads to protectfrom corrosion and galling; PTFE or Grafoilpacking optional

All stems are 316 stainless steel All stem threads are rolled for strength and ease of operation One-piece bonnet with a metal-to-metal seal to the valve body below

the bonnet threads Slotted spring pin to prevent accidental loosening Vinyl dust caps for bonnets and stems (non-packing)


Connections

Pressure Hard seat: 10,000 psi @ 200 Fratings* Soft seat: 6,000 psi @ 200 F

0.187"

Hard seat: CV0.44 Soft seat: CV0.76


Options Panel mountings, o-ring materials, handles,

packings, regulating stem and stem tips

SPECIFICATIONS

2020/2120

Flow Schematic

Hard & Sof t SeatM a n i f o l d V a l v e s , 2 - V a l v e L i q u i d L e v e l




75/144

75

Series....................................................2-valve

Seat ...................................................Hard seat

Process type ..................................

Connection..........

Valve type........................Flange-female, steel

2 0 2 0 MFCEXAMPLE


SERIES 2 2-valve


PROCESS TYPE 2

CONNECTIONS 0

VALVE TYPES MFC Flange-Female, Steel MFS Flange-Female, Stainless SteelMMC Flange-Flange, Steel MMS Flange-Flange, Stainless Steel





NOTE 3:The standard o-ring in all the NOSHOK manifold valves is FKM and T1 hard non-rotating (316SS) stem tip is the only optionavailable on the 2120 Series soft seat version.


** For 2020 Series only.*** For 2120 Series only.


Series............................................................................2-valve

Seat ...........................................................................Hard seat

Process type ..........................................................

Connection..................................

Valve type................................................ Flange-female, steel

Packing............................................................................PTFE

Stem tip ................................................................Non-rotating

2 0 2 0 MFC P1 T1EXAMPLE with Additional Options


SOFT SEATS PK1 PEEK*** KF1 PCTFE***





2020/2120ORDERING

INFORMATION



76/144

76

1/2"

3-3/8"

2-1/8"

2-1/2"

2-1/32"

1-1/8"

2-7/16"

1-5/8"

2-5/16"

3-3/4"

1-1/4"

2-7/16"

1-5/8"

2-5/16"

3-3/4"

1-1/4"

1/2"

1/2"

3-3/8"

2-1/8"

2-1/2"

2-1/32"

1-1/8"

Flange-Flange

Flange-Female

For panel mount and

packing dimensions

see pgs. 64-65.

DimensionsM a n i f o l d V a l v e s , 2 - V a l v e L i q u i d L e v e l


77/144

77

1Valve body 2Slotted spring pin 3FKM o-ring 4PTFE back-up ring 5Valve stem 6Valve bonnet 7 Blue dust cap 8 Set screw 9 Valve"T" handle

10Gasket ring11Head bolt

1Valve body 2Slotted spring pin 3Delrinseat 4FKM o-ring 5PTFE back-up ring 6Valve stem 7Valve bonnet

8 Blue dust cap 9 Set screw10 Valve"T" handle11Gasket ring12Head bolt

DIMENSIONS

1

2

34

56

7

8

9

1011

12

1

23

45

6

7

8

9

10

11

Hard Seat

Soft Seat

2020/2120


78/144

78

200002/210002

Combines isolating and venting in a single valve, eliminating the need for

or gauges to be removed without disturbing the permanent piping installation

Block valve is located on the left side and the bleed valve is located on topin a 90 orientation, venting is to the right


200002/200402 Series hard seat valves have 10,000 psi pressurerating @200 F

210002/210402 Series soft seat valves have 6,000 psi pressurerating @200 F

210002/210402 Series valves also feature a replaceable Delrinseat, and roddable cleaning

PCTFE or PEEK soft seat optional Blow-out proof stem provides a secondary stem seal in the full open position FKM o-ring seal and PTFE back-up ring below the stem threads to protect from

corrosion and galling; PTFE or Grafoilpacking optional All stems are 316 stainless steel Stem and bonnet threads are rolled for strength and ease of operation One-piece bonnet with a metal-to-metal seal to the valve body below the

bonnet threads Slotted spring pin to prevent accidental loosening Vinyl dust caps for bonnets and stems (non-packing)

200402/210402


Connection Left venting optional

Pressure Hard seat: 10,000 psi @ 200 Fratings* Soft seat: 6,000 psi @ 200 F

0.187"

Flow Hard seat: CV0.44 Soft seat: CV0.76

Stem seal All 316 stainless steel stems with FKM o-ring and& type PTFE back-up ring below thethreads, PTFE orGrafoilpacking optional


SPECIFICATIONS

Flow Schematic

Narrow Block & Bleed, Hard Seat & Soft SeatM a n i f o l d V a l v e s , 2 - V a l v e S t a t i c P r e s s u r e




79/144

79

Series........................................................................2-valve

Seat .......................................................................Hard seat

Process type................................................Static pressure

Connection................................................ 1/2" NPT-Flange

Vent........................................................................1/4" NPTValve type............................................ Flange-female, steel

2 0 0 4 02 MFCEXAMPLE


SERIES 2 2-valve


PROCESS TYPE 0 Static pressure

CONNECTIONS 0 2 4

VENT 02 1/4" NPT

VALVE TYPES MFC Flange-Female, Steel MMS Flange-Flange, Stainless Steel MMCL Flange-Flange, Steel, Left VentMFS Flange-Female, Stainless Steel MFCL Flange-Female, Steel, Left Vent MMSL Flange-Flange,Stainless Steel, Left VentMMC Flange-Flange, Steel MFSL Flange - Female, Stainless Steel, Left Vent


200002/210002&200402/210402


NOTE 1:The example shown includes ALL possi ble additional options . Please include ONLY the options r equired for your application when


NOTE 3:T1 Hard non-rotating (316 stainless standard) stem tip is the only option available on the 210002/210402 Series soft seat version.


** For hard seat only.







Series ..............................................................................2-valve

Seat.............................................................................Hard seat

Process type ......................................................Static pressure

Connection.......................................................1/2" NPT-Flange

Vent ...............................................................................1/4" NPT

Valve Product Solutions Catalog

Documents

Transcript of Valve Product Solutions Catalog