Vactor & Guzzler Serial Number Locations number locations.pdf · PLATE,VG SERIAL NUMBER AC...
10
Vactor & Guzzler Serial Number Locations Effective Date May 3, 2012 1 TOC page 2100 PLUS .............................................................................................................. 2 2100....................................................................................................................... 3 2103....................................................................................................................... 4 RAMJET ................................................................................................................... 5 HXX SERIES............................................................................................................ 6 GUZZLER ACE & CL ................................................................................................ 7 GUZZLER NX ........................................................................................................... 8 GUZZLER NX - R ..................................................................................................... 9 PREDATOR LVT ...................................................................................................... 10
Transcript of Vactor & Guzzler Serial Number Locations number locations.pdf · PLATE,VG SERIAL NUMBER AC...
Vactor & Guzzler Serial Number Locations
Effective Date May 3, 2012 1 TOC page
2100 Plus ..............................................................................................................22100.......................................................................................................................32103.......................................................................................................................4Ramjet ...................................................................................................................5HXX seRies............................................................................................................6GuzzleR aCe & Cl ................................................................................................7GuzzleR NX ...........................................................................................................8GuzzleR NX - R .....................................................................................................9PRedatoR lVt ......................................................................................................10
Vactor 2100 Plus maiNteNaNCe
Effective Date May 3, 2012 2 2100Plus serial number_r1
model & seRial NumbeR loCatioN
VACTOR®
Manufacturing Inc.Streator, Illinois U.S.A.
Model No.
Covered by one of the following U.S. patents:
SUBSIDIARY OF FEDERAL SIGNAL CORP.
Serial No.
RE34,585, D348,961, D344,162, 5,704,989, 5,469,597,4,989,917, 4,896,686, 4,819,314, 5,755,264, 5,030,259, 4,935,984 and patents pending.Foreign patents: EU 0,434,007
43950 rev A
LTR. Revision By Date ECN No.0 Initial release - - -
This document contains material and/or information which is the property of Vactor Manufacturing Inc., and supplied only on a confidential basis. No transmittal or disclosure shall be made to any person, firm, or corporation without written approval of Vactor Manufacturing Inc.. The controlled master copy of this document resides in electronic format. All printed copies of thisdocument are UNCONTROLLED.
VACTOR Manufacturing Inc. STREATOR, IL.NAME
Vactor Name PlateDR. DATE SCALE PART NO.
AC 2-7-2006 NONE 43950
DIMS. IN INCHESTOLERANCES UNLESS NOTED +/- .032 per foot
ENG. STANDARDSE0010 - Decal layout specificationsE0014 - Metal Nameplates
Material: .020” aluminum7.5" wide x 5" tall
3/16” corner radiusNo adhesive backing
VACTOR®
Manufacturing Inc.
Streator, Illinois U.S.A.
Model No.
Covered by one of the following U.S. patents:
SUBSIDIARY OF FEDERAL SIGNAL CORP.
Serial No.
Embossing Die viewScale: none
Tooling embosses the lettering as shown, rounds the corners and four 1/8” diameter holes
Printing viewScale: none
Mask surface for the areas shown and coat surface with black
Covered by one of the following U.S. patents:
RE34,585, D348,961, D344,162, 5,704,989, 5,469,597,4,989,917, 4,896,686, 4,819,314, 5,755,264, 5,030,259, 4,935,984 and patents pending.
Foreign patents: EU 0,434,007
43950 rev A
A Removed stamp frames - added active patents & part no. AC 2-7-2006 6257
Pre 2011 - Location is same on all versions.
2011 and newer units all have the tag in the same general location on the driver side on the front part of the subframe. Options may obscure direct viewing.
LTR. Revision By ECN No.
This document contains material and/or information which is the property of Vactor Manufacturing Inc., and supplied only on a confidential basis. No transmittal or disclosure shall be made to any person, firm, or corporation without written approval of Vactor Manufacturing Inc.. The controlled master copy of this document resides in electronic format. All printed copies of thisdocument are UNCONTROLLED.
VACTOR Manufacturing Inc. STREATOR, IL.
DR. DATE SCALE PART NO.
DIMS. IN INCHESTOLERANCES UNLESS NOTED +/- .032 per foot
ENG. STANDARDS
Date
NAME
4" wide x 2" tall x .032 thick aluminum - satin finish with clear coat3/16” corner radius
4 holes x 1/8“ diameter - one in each cornerCoat surface with black as shown.
Plain back, no adhesive.
0 Initial release AC 9-28-2010
PLATE,VG SERIAL NUMBER
AC 9-28-2010 NONE 49873
E0010 - Decal layout specificationsE0014 - Metal name plates except as noted above
12546A Updated active patents AC 9-21-2011 14823B Updated active patents AC 4-12-2012 16447
Manufacturing Inc. • Streator, Illinois U.S.A.Model No. Serial No.
Covered by one or more of the following U.S.patents: 5,704,989 • D616,468 • 7,712,481 • 8,057,139 and patents pending.
SUBSIDIARY OF FEDERAL SIGNAL CORP.49873 rB
PD unit shown
Vactor 2100 maiNteNaNCe
Effective Date May 3, 2012 3 2100 serial number_r1
model & seRial NumbeR loCatioN
VACTOR®
Manufacturing Inc.Streator, Illinois U.S.A.
Model No.
Covered by one of the following U.S. patents:
SUBSIDIARY OF FEDERAL SIGNAL CORP.
Serial No.
RE34,585, D348,961, D344,162, 5,704,989, 5,469,597,4,989,917, 4,896,686, 4,819,314, 5,755,264, 5,030,259, 4,935,984 and patents pending.Foreign patents: EU 0,434,007
43950 rev A
LTR. Revision By Date ECN No.0 Initial release - - -
This document contains material and/or information which is the property of Vactor Manufacturing Inc., and supplied only on a confidential basis. No transmittal or disclosure shall be made to any person, firm, or corporation without written approval of Vactor Manufacturing Inc.. The controlled master copy of this document resides in electronic format. All printed copies of thisdocument are UNCONTROLLED.
VACTOR Manufacturing Inc. STREATOR, IL.NAME
Vactor Name PlateDR. DATE SCALE PART NO.
AC 2-7-2006 NONE 43950
DIMS. IN INCHESTOLERANCES UNLESS NOTED +/- .032 per foot
ENG. STANDARDSE0010 - Decal layout specificationsE0014 - Metal Nameplates
Material: .020” aluminum7.5" wide x 5" tall
3/16” corner radiusNo adhesive backing
VACTOR®
Manufacturing Inc.
Streator, Illinois U.S.A.
Model No.
Covered by one of the following U.S. patents:
SUBSIDIARY OF FEDERAL SIGNAL CORP.
Serial No.
Embossing Die viewScale: none
Tooling embosses the lettering as shown, rounds the corners and four 1/8” diameter holes
Printing viewScale: none
Mask surface for the areas shown and coat surface with black
Covered by one of the following U.S. patents:
RE34,585, D348,961, D344,162, 5,704,989, 5,469,597,4,989,917, 4,896,686, 4,819,314, 5,755,264, 5,030,259, 4,935,984 and patents pending.
Foreign patents: EU 0,434,007
43950 rev A
A Removed stamp frames - added active patents & part no. AC 2-7-2006 6257
Pre 2011 - Location is same on all versions.
2011 and newer units all have the tag in the same general location on the driver side on the front part of the subframe. Options may obscure direct viewing.
LTR. Revision By ECN No.
This document contains material and/or information which is the property of Vactor Manufacturing Inc., and supplied only on a confidential basis. No transmittal or disclosure shall be made to any person, firm, or corporation without written approval of Vactor Manufacturing Inc.. The controlled master copy of this document resides in electronic format. All printed copies of thisdocument are UNCONTROLLED.
VACTOR Manufacturing Inc. STREATOR, IL.
DR. DATE SCALE PART NO.
DIMS. IN INCHESTOLERANCES UNLESS NOTED +/- .032 per foot
ENG. STANDARDS
Date
NAME
4" wide x 2" tall x .032 thick aluminum - satin finish with clear coat3/16” corner radius
4 holes x 1/8“ diameter - one in each cornerCoat surface with black as shown.
Plain back, no adhesive.
0 Initial release AC 9-28-2010
PLATE,VG SERIAL NUMBER
AC 9-28-2010 NONE 49873
E0010 - Decal layout specificationsE0014 - Metal name plates except as noted above
12546A Updated active patents AC 9-21-2011 14823B Updated active patents AC 4-12-2012 16447
Manufacturing Inc. • Streator, Illinois U.S.A.Model No. Serial No.
Covered by one or more of the following U.S.patents: 5,704,989 • D616,468 • 7,712,481 • 8,057,139 and patents pending.
SUBSIDIARY OF FEDERAL SIGNAL CORP.49873 rB
Fan unit shown
Vactor 2103 maiNteNaNCe
Effective Date May 3, 2012 4 2103 serial number_r1
model & seRial NumbeR loCatioN
VACTOR®
Manufacturing Inc.Streator, Illinois U.S.A.
Model No.
Covered by one of the following U.S. patents:
SUBSIDIARY OF FEDERAL SIGNAL CORP.
Serial No.
RE34,585, D348,961, D344,162, 5,704,989, 5,469,597,4,989,917, 4,896,686, 4,819,314, 5,755,264, 5,030,259, 4,935,984 and patents pending.Foreign patents: EU 0,434,007
43950 rev A
LTR. Revision By Date ECN No.0 Initial release - - -
This document contains material and/or information which is the property of Vactor Manufacturing Inc., and supplied only on a confidential basis. No transmittal or disclosure shall be made to any person, firm, or corporation without written approval of Vactor Manufacturing Inc.. The controlled master copy of this document resides in electronic format. All printed copies of thisdocument are UNCONTROLLED.
VACTOR Manufacturing Inc. STREATOR, IL.NAME
Vactor Name PlateDR. DATE SCALE PART NO.
AC 2-7-2006 NONE 43950
DIMS. IN INCHESTOLERANCES UNLESS NOTED +/- .032 per foot
ENG. STANDARDSE0010 - Decal layout specificationsE0014 - Metal Nameplates
Material: .020” aluminum7.5" wide x 5" tall
3/16” corner radiusNo adhesive backing
VACTOR®
Manufacturing Inc.
Streator, Illinois U.S.A.
Model No.
Covered by one of the following U.S. patents:
SUBSIDIARY OF FEDERAL SIGNAL CORP.
Serial No.
Embossing Die viewScale: none
Tooling embosses the lettering as shown, rounds the corners and four 1/8” diameter holes
Printing viewScale: none
Mask surface for the areas shown and coat surface with black
Covered by one of the following U.S. patents:
RE34,585, D348,961, D344,162, 5,704,989, 5,469,597,4,989,917, 4,896,686, 4,819,314, 5,755,264, 5,030,259, 4,935,984 and patents pending.
Foreign patents: EU 0,434,007
43950 rev A
A Removed stamp frames - added active patents & part no. AC 2-7-2006 6257
Location is same on all versions.
Old style - Pre-2011
New style
LTR. Revision By ECN No.
This document contains material and/or information which is the property of Vactor Manufacturing Inc., and supplied only on a confidential basis. No transmittal or disclosure shall be made to any person, firm, or corporation without written approval of Vactor Manufacturing Inc.. The controlled master copy of this document resides in electronic format. All printed copies of thisdocument are UNCONTROLLED.
VACTOR Manufacturing Inc. STREATOR, IL.
DR. DATE SCALE PART NO.
DIMS. IN INCHESTOLERANCES UNLESS NOTED +/- .032 per foot
ENG. STANDARDS
Date
NAME
4" wide x 2" tall x .032 thick aluminum - satin finish with clear coat3/16” corner radius
4 holes x 1/8“ diameter - one in each cornerCoat surface with black as shown.
Plain back, no adhesive.
0 Initial release AC 9-28-2010
PLATE,VG SERIAL NUMBER
AC 9-28-2010 NONE 49873
E0010 - Decal layout specificationsE0014 - Metal name plates except as noted above
12546A Updated active patents AC 9-21-2011 14823B Updated active patents AC 4-12-2012 16447
Manufacturing Inc. • Streator, Illinois U.S.A.Model No. Serial No.
Covered by one or more of the following U.S.patents: 5,704,989 • D616,468 • 7,712,481 • 8,057,139 and patents pending.
SUBSIDIARY OF FEDERAL SIGNAL CORP.49873 rB
Vactor RAMJET maiNteNaNCe
Effective Date May 3, 2012 5 Ramjet serial number_r1
model & seRial NumbeR loCatioN
VACTOR®
Manufacturing Inc.Streator, Illinois U.S.A.
Model No.
Covered by one of the following U.S. patents:
SUBSIDIARY OF FEDERAL SIGNAL CORP.
Serial No.
RE34,585, D348,961, D344,162, 5,704,989, 5,469,597,4,989,917, 4,896,686, 4,819,314, 5,755,264, 5,030,259, 4,935,984 and patents pending.Foreign patents: EU 0,434,007
43950 rev A
LTR. Revision By Date ECN No.0 Initial release - - -
This document contains material and/or information which is the property of Vactor Manufacturing Inc., and supplied only on a confidential basis. No transmittal or disclosure shall be made to any person, firm, or corporation without written approval of Vactor Manufacturing Inc.. The controlled master copy of this document resides in electronic format. All printed copies of thisdocument are UNCONTROLLED.
VACTOR Manufacturing Inc. STREATOR, IL.NAME
Vactor Name PlateDR. DATE SCALE PART NO.
AC 2-7-2006 NONE 43950
DIMS. IN INCHESTOLERANCES UNLESS NOTED +/- .032 per foot
ENG. STANDARDSE0010 - Decal layout specificationsE0014 - Metal Nameplates
Material: .020” aluminum7.5" wide x 5" tall
3/16” corner radiusNo adhesive backing
VACTOR®
Manufacturing Inc.
Streator, Illinois U.S.A.
Model No.
Covered by one of the following U.S. patents:
SUBSIDIARY OF FEDERAL SIGNAL CORP.
Serial No.
Embossing Die viewScale: none
Tooling embosses the lettering as shown, rounds the corners and four 1/8” diameter holes
Printing viewScale: none
Mask surface for the areas shown and coat surface with black
Covered by one of the following U.S. patents:
RE34,585, D348,961, D344,162, 5,704,989, 5,469,597,4,989,917, 4,896,686, 4,819,314, 5,755,264, 5,030,259, 4,935,984 and patents pending.
Foreign patents: EU 0,434,007
43950 rev A
A Removed stamp frames - added active patents & part no. AC 2-7-2006 6257
Pre-2011 location is same on all versions.
Old style
New style
2011 and newer units all have the tag in the same general location on the driver side on the front part of the subframe. Options may obscure direct viewing.
LTR. Revision By ECN No.
This document contains material and/or information which is the property of Vactor Manufacturing Inc., and supplied only on a confidential basis. No transmittal or disclosure shall be made to any person, firm, or corporation without written approval of Vactor Manufacturing Inc.. The controlled master copy of this document resides in electronic format. All printed copies of thisdocument are UNCONTROLLED.
VACTOR Manufacturing Inc. STREATOR, IL.
DR. DATE SCALE PART NO.
DIMS. IN INCHESTOLERANCES UNLESS NOTED +/- .032 per foot
ENG. STANDARDS
Date
NAME
4" wide x 2" tall x .032 thick aluminum - satin finish with clear coat3/16” corner radius
4 holes x 1/8“ diameter - one in each cornerCoat surface with black as shown.
Plain back, no adhesive.
0 Initial release AC 9-28-2010
PLATE,VG SERIAL NUMBER
AC 9-28-2010 NONE 49873
E0010 - Decal layout specificationsE0014 - Metal name plates except as noted above
12546A Updated active patents AC 9-21-2011 14823B Updated active patents AC 4-12-2012 16447
Manufacturing Inc. • Streator, Illinois U.S.A.Model No. Serial No.
Covered by one or more of the following U.S.patents: 5,704,989 • D616,468 • 7,712,481 • 8,057,139 and patents pending.
SUBSIDIARY OF FEDERAL SIGNAL CORP.49873 rB
HXX maiNteNaNCe
Effective Date May 3, 2012 6 HXX serial number_r1
model & seRial NumbeR loCatioN
LTR. Revision By ECN No.
This document contains material and/or information which is the property of Vactor Manufacturing Inc., and supplied only on a confidential basis. No transmittal or disclosure shall be made to any person, firm, or corporation without written approval of Vactor Manufacturing Inc.. The controlled master copy of this document resides in electronic format. All printed copies of thisdocument are UNCONTROLLED.
VACTOR Manufacturing Inc. STREATOR, IL.
DR. DATE SCALE PART NO.
DIMS. IN INCHESTOLERANCES UNLESS NOTED +/- .032 per foot
ENG. STANDARDS
Date
NAME
4" wide x 2" tall x .032 thick aluminum - satin finish with clear coat3/16” corner radius
4 holes x 1/8“ diameter - one in each cornerCoat surface with black as shown.
Plain back, no adhesive.
0 Initial release AC 9-28-2010
PLATE,VG SERIAL NUMBER
AC 9-28-2010 NONE 49873
E0010 - Decal layout specificationsE0014 - Metal name plates except as noted above
12546A Updated active patents AC 9-21-2011 14823B Updated active patents AC 4-12-2012 16447
Manufacturing Inc. • Streator, Illinois U.S.A.Model No. Serial No.
Covered by one or more of the following U.S.patents: 5,704,989 • D616,468 • 7,712,481 • 8,057,139 and patents pending.
SUBSIDIARY OF FEDERAL SIGNAL CORP.49873 rB
General location of Serial No. Plate for HXX units is on the driver side on the front part of the subframe. Options may obscure direct viewing.
GUZZLER ACE/CLASSIC maiNteNaNCe
Effective Date May 3, 2012 7 Guzzler ACE_CL serial number_r2
model & seRial NumbeR loCatioN
Aluminum control box location
Old style New style
Composite control box locationNote: 2011 and newer units all have the tag in the
same general location on the driver side on the front part of the subframe. Options may obscure direct viewing.
LTR. Revision By ECN No.
This document contains material and/or information which is the property of Vactor Manufacturing Inc., and supplied only on a confidential basis. No transmittal or disclosure shall be made to any person, firm, or corporation without written approval of Vactor Manufacturing Inc.. The controlled master copy of this document resides in electronic format. All printed copies of thisdocument are UNCONTROLLED.
VACTOR Manufacturing Inc. STREATOR, IL.
DR. DATE SCALE PART NO.
DIMS. IN INCHESTOLERANCES UNLESS NOTED +/- .032 per foot
ENG. STANDARDS
Date
NAME
4" wide x 2" tall x .032 thick aluminum - satin finish with clear coat3/16” corner radius
4 holes x 1/8“ diameter - one in each cornerCoat surface with black as shown.
Plain back, no adhesive.
0 Initial release AC 9-28-2010
PLATE,VG SERIAL NUMBER
AC 9-28-2010 NONE 49873
E0010 - Decal layout specificationsE0014 - Metal name plates except as noted above
12546A Updated active patents AC 9-21-2011 14823B Updated active patents AC 4-12-2012 16447
Manufacturing Inc. • Streator, Illinois U.S.A.Model No. Serial No.
Covered by one or more of the following U.S.patents: 5,704,989 • D616,468 • 7,712,481 • 8,057,139 and patents pending.
SUBSIDIARY OF FEDERAL SIGNAL CORP.49873 rB
GUZZLER NX-R maiNteNaNCe
Effective Date May 3, 2012 8 Guzzler NX-R serial number_r1
model & seRial NumbeR loCatioN
LTR. Revision By ECN No.
This document contains material and/or information which is the property of Vactor Manufacturing Inc., and supplied only on a confidential basis. No transmittal or disclosure shall be made to any person, firm, or corporation without written approval of Vactor Manufacturing Inc.. The controlled master copy of this document resides in electronic format. All printed copies of thisdocument are UNCONTROLLED.
VACTOR Manufacturing Inc. STREATOR, IL.
DR. DATE SCALE PART NO.
DIMS. IN INCHESTOLERANCES UNLESS NOTED +/- .032 per foot
ENG. STANDARDS
Date
NAME
4" wide x 2" tall x .032 thick aluminum - satin finish with clear coat3/16” corner radius
4 holes x 1/8“ diameter - one in each cornerCoat surface with black as shown.
Plain back, no adhesive.
0 Initial release AC 9-28-2010
PLATE,VG SERIAL NUMBER
AC 9-28-2010 NONE 49873
E0010 - Decal layout specificationsE0014 - Metal name plates except as noted above
12546A Updated active patents AC 9-21-2011 14823B Updated active patents AC 4-12-2012 16447
Manufacturing Inc. • Streator, Illinois U.S.A.Model No. Serial No.
Covered by one or more of the following U.S.patents: 5,704,989 • D616,468 • 7,712,481 • 8,057,139 and patents pending.
SUBSIDIARY OF FEDERAL SIGNAL CORP.49873 rB
9
GUZZLER NX maiNteNaNCe
Effective Date May 30, 2008
model & seRial NumbeR loCatioN
Location on new units on front of housing.
Location on older units in lower right hand corner of housing.
Guzzler Predator maiNteNaNCe
Effective Date May 3, 2012 10 KH LVT serial number_r0
model & seRial NumbeR loCatioN
