Vac Evap sup - Ted Pella, Inc. · TypicalProperties AP101 AP100 HGrease LGrease MGrease NGrease...
Transcript of Vac Evap sup - Ted Pella, Inc. · TypicalProperties AP101 AP100 HGrease LGrease MGrease NGrease...
Vacuum Evaporation Supplies
TED PELLA, INC. Phone: 530-243-2200 or 800-237-3526 (USA) FAX: 530-243-3761Domestic (USA): [email protected] International: [email protected] www.tedpella.com
Vacuum Evaporation Pumps
Dual Stage, RotaryVane,Vacuum Pumps
The line of VRL Rotary Vane pumps will meet your demands for high pumping speed combined with high ultimatevacuum. These dual stage, rotary vane pumps are reliable, efficient and competitively priced. High quality engineer-ing has resulted in corrosive resistant pumps with a compact design coupled to quiet and low vibration operation.These pumps are ideally suited for many applications in labs and small production systems such as analytical instru-ments, electron microscopes, sputter and deposition systems, freeze drying, vacuum ovens and furnaces, cluster toolload locks and mass spectrometer inlet systems.
Model 100-3.5Model 100-3.5 Model 100-3.5Model 200-7.0
Features overview:• 6M3, 12M3 and 24M3
• Pumping Capacity• Extremely Quiet Operation• Virtually Vibration Free• Compact Design• Corrosion Resistant• Anti-suck Back Design• Multiple Voltage Motors
Model 100-3.5Model 400-14
Model 100-3.5 200-7.0 400-14Pumping Speed @60Hz 100l/min, 3.5CFM, 6m3/hr 200l/min, 7CFM, 12m3/hr 400l/min, 7CFM, 24m3/hrPumping Speed @50Hz 83l/min, 3CFM, 5m3/hr 1661/min, 6CFM, 10m3/hr 3331/min, 11.6CFM, 20m3/hrUltimate Pressure 6 x 10-4mbar, 5 x 10-4 Torr 6 x 10-4mbar, 5 x 10-4 Torr 1 x 10-3mbar, 1 x 10-3 TorrUltimate Pressure w/gas ballast 6 x 10-2 mbar, 5 x 10-2 Torr 6 x 10-2 mbar, 5 x 10-2 Torr 6 x 10-4 mbar, 5 x 10-4 TorrOil Capacity 500cc 600cc 1500ccMotor CE marked 115/208-230V, 50/60Hz, 1⁄2 HP 115/208-230V, 50/60Hz, 1⁄2 HP 115/208-230V, 50/60Hz, 1 HPWeight, net 23kg (51 lbs.) 24kg (54 lbs) 32kg (71 lbs)Ambient Operating temperature 7º to 40ºC (45º to 104ºF) 7º to 40ºC (45º to 104ºF) 7º to 40ºC (45º to 104ºF)
Ordering Information:92080 Rotary Vane Pump 100-3.5, 6m3/hr, 115/208-230volts 60/50Hz92081 Rotary Vane Pump 200-7, 12m3/hr, 115/208-230volts 60/50Hz92082 Rotary Vane Pump 400-14, 24m3/hr, 115volts 60Hz92082-220 Rotary Vane Pump 400-14, 24m3/hr, 230/380volts 60/50Hz
2 TED PELLA, INC.
Vacuum Evaporation Pumps
To meet your demands for high throughputs with high ultimate vacuum BOC Edwards have developed a totally newconcept in vacuum pumps - the world's first dual-mode vacuum pump.
Its unique dual-mode action allows the user to easily configure the unit to pump very high gas loads and also achieveexcellent vacuum –all from a single pump.
This radical operation is matched by innovative design features such as a pumping mechanism incorporatingadvanced new materials, a fully-featured BOC Edwards motor and the incorporation of a fast-acting inlet valve toseal the pump for suck-back protection.
In addition, BOC Edwards extensive research into drive train and motor noise mean the RV series also delivers a highperformance pump with a broad performance envelope that's quiet to live with and easy to maintain.
Edwards RV pumps are significantly quieter – noise levels of 48 dBA 50Hz are typically half the noise of a conven-tional pump and have been achieved by extensive work on the drive train and motor.The pumps have the unique ability to deliver excellent ultimate vacuum in both high vacuum and high throughputmodes with or without gas ballast. This gives the user an unrivaled opportunity to select the optimum pumping per-formance without compromising the application.The simple to use mode selector and accessible, three-position gas ballast control allow the pump to be reconfiguredat any time, even when the pump is running.
Ordering Information:92033 Edwards RV5, Direct Drive, Dual Mode, Rotary Vane Vacuum Pump, 115V, 1ph, 50/60Hz92033-220 Edwards RV5, Direct Drive, Dual Mode, Rotary Vane Vacuum Pump, 220V, 1ph, 50Hz92035 Edwards RV8, Direct Drive, Dual Mode, Rotary Vane Vacuum Pump, 115V, 1ph, 50/60Hz92035-220 Edwards RV8, Direct Drive, Dual Mode, Rotary Vane Vacuum Pump, 220V, 1ph, 50Hz
All above include: Ultragrade 19 oil and electrical supply cable
RV Dual-Mode HighVacuum RotaryVane Pumps
Model Edwards RV5 Edwards RV8Pumping Speed @60Hz 3.6 ft3min-1 (6.2 m3h-1) 5.9 ft3min-1 (10 m3h-1)Pumping Speed @50Hz 3 ft3min-1 (5.1 m3h-1) 5 ft3min-1 (8.5 m3h-1)Ultimate Pressure 1.5 x 10-3 torr 1.5 x 10-3 torrUltimate Pressure w/gas ballast 9.1 x 10-2 torr (High flow, II) 4.6 x 10-2 torr (High flow, II)Oil Capacity 700cc 750ccMotor Power 110-120V 50/60Hz; 220-240V 50Hz 110-120V 50/60Hz; 220-240V 50HzWeight, net 21.5kg (48 lbs.) 26kg (58 lbs.)Ambient Operating temperature 12º to 40ºC (54º to 104ºF) 12º to 40ºC (54º to 104ºF)
Model 100-3.5Model RV5 Model 100-3.5Model RV8
Vacuum Evaporation Supplies
3TED PELLA, INC. Phone: 530-243-2200 or 800-237-3526 (USA) FAX: 530-243-3761Domestic (USA): [email protected] International: [email protected] www.tedpella.com
Tungsten Metal Boatsfor Cleaning MolybdenumApertures and Evaporation
Two of the tungsten boats listed onthis page are a combination of therefractory metal tungsten and analumina barrier (Al2O3) coating overthe tab area. The exposed metal areacomprising the bottom of the boatallows the sample to be in good ther-mal contact with the source. Thebarrier will tend to help concentratethe heat towards the center. The alu-mina barrier will inhibit an evapo-rant (if used as a sample instead ofan aperture) from creeping towardthe heat sink or from wetting theentire boat.See other vacuum evaporation acces-sories under the "V" alphabetical sec-tion.
Tungsten Boats withAlumina Barriers
3-1⁄4" L x 1⁄2" W (82.5 x 12.7mm),trough: 1⁄4" W x 3⁄4" L (6.35 x19.05mm) x 3⁄32" (2.38mm) deep.Thickness: 0.010" (0.25mm) tung-sten.Al2O3 = 0.010" (0.25mm) coating.
84-2 Tungsten Boat- Al2O3 barrier,1⁄4" x 3⁄4" trough, pkg/5
4" L x 1" W (101.6 x 25.4mm),trough: 5⁄8" W x 1-3⁄4" L (15.9 x44.5mm) x 3⁄32" (2.4mm) deep.
84-3 Tungsten Boat - Al2O3 barrier,5⁄8" x 1-3⁄4" trough, pkg/5
Alumina CoatedEvaporation Source
Replaces alumina crucibles for somespecific applications. Good heattransfer yet has alumina inertness.Evaporant does not wet the alumina:no resistant change of the boat whenevaporant melts. Due to the non-wet-ting characteristic, the evaporantforms a sphere when melted resultingin a point source.4" L x 1⁄2" W (101 x 12mm). Trough isa dimple: 1⁄2" diameter and 1⁄8" deep(12 x 3mm). Alumina coated thick-ness 0.005" (0.127mm). Tungstenthickness 0.010" (0.25mm).
84-4 Tungsten Boat, Alumina coat-ed, 1⁄2" dimple, pkg/5
Tungsten BoatsWithoutAlumina Barriers
4" L x 1" W (101.6 x 25.4mm),trough: 1" W x 2-1⁄8" L (25.4 x58.8mm) x 3⁄32" (2.4mm) deep.Tungsten 0.010" thin (0.25mm).
84-5 Tungsten Boat, 1" x 2-1⁄8"trough, pkg/5
3" L x 3⁄4" W (76.2 x 19.5mm),trough: 5⁄8" W x 1"L (15.9 x 25.4mm)x 1⁄8" (3.18mm) deep. Tungsten0.005" (0.127mm) thin.
84-6 Tungsten Boat, 5⁄8" x 1"trough, pkg/5
Thickness: 0.002" (0.05mm)Overall length: 1-1⁄4" (32mm)Trough: 1⁄2" L x 3⁄8" W (12.7mm x9.5mm) x 1⁄32" (0.8mm) deep
84 Tungsten Boat, 1⁄2" x 3⁄8"trough, pkg/5
4" L x 1⁄2" W (101.6 x 12.7mm),trough: 1-1⁄2" L x 1⁄2" W (38.1mm x12.7mm) x 1⁄8" (3.2mm) deep.Tungsten 0.010" thin (0.25mm).
84-7 Tungsten Boat, 1-1⁄2" trough,pkg/5
4" L x 3⁄4" W (101.6 x 19mm),trough: 1⁄2" W x 1-1⁄2" L x (12.7 x38.1mm) x 1⁄8" (3.2mm) deep.Tungsten 0.010" thin (0.25mm).
84-8 Tungsten Boat, 1⁄2" x 1-1⁄2"trough, pkg/5
3" L x 3⁄4" W (76.2 x 19mm), trough:5⁄8" W x 1" L x (15.9 x 25.4mm) x1⁄8" (3.2mm) deep. Tungsten 0.010"thin (0.25mm).
84-9 Tungsten Boat, 5⁄8" x 1"trough, pkg/5
Vacuum Evaporation Supplies
4 TED PELLA, INC.
Molybdenum and PlatinumMetal Boats7.9mm W x 76.2 mm L (5⁄16" W x 3"L), trough: 4.8 x 12.7mm (3⁄16" W x1⁄2" L) x .8mm (1⁄32") deep.Thickness: 0.05mm (0.002").81 Molybdenum Boat, 3⁄16" x 1⁄2"
trough, pkg/582 Platinum Boat, 3⁄16" x 1⁄2"
trough, each83 Tantalum Boat, 3⁄16" x 1⁄2"
trough, pkg/5
Molybdenum Metal Boat (long) forStrip Aperture Cleaning. 12.7mm Wx 76.2mm L (1⁄2" W x 3" L), trough:9.6mm W x 50.8mm L (3⁄8" W x 2" Lx 1mm (.04") deep.
80-1 Molybdenum Boat, 3⁄8" x 2"trough, pkg/5
Point Source LoopFilaments
3-StrandTungsten FilamentVacuum grade tungsten wire, 0.5mm(0.020") diameter, 8.9cm long (3-3⁄8"). The "V" is 18mm (0.7") deep,and has an included angle of 45°.
27-101 3-Strand "V" Filament,pkg/10
1-StrandTungsten FilamentVacuum grade tungsten wire fila-ments, 0.5mm (0.02") diameter,6.4cm long(2-1⁄2"). "V" is 18mm (1⁄2") deep, andhas an included angle of 45°.
27-19 1-Strand "V" Filament,pkg/10
3 and 4 StrandTungstenFilamentsDiameters:0.025-0.060” (.635-1.524mm)27-61 Tungsten Filament, 3 x 0.025"
dia., (0.76mm), each27-62 Tungsten Filament, 3 x 0.030"
dia., (0.76mm), each27-63 Tungsten Filament, 4 x 0.030"
dia., (1.5mm), each27-64 Tungsten Filament, 0.060"
dia., (1.524mm), each
3 and 4 StrandTungstenDouble-V FilamentsDiameters:0.025-0.060” (.635-1.524mm)27-70 Tungsten Filament, 3 x 0.025"
dia., (0.76mm), each27-71 Tungsten Filament, 3 x 0.030"
dia., (0.76mm), each27-72 Tungsten Filament, 4 x 0.030"
dia., (1.5mm), each27-73 Tungsten Filament, 0.060"
dia., (1.524mm), each
TungstenWire BasketWire Wire
Prod. I.D. Height lead dia.No. Turns (mm) (mm) (cm) (inches)72-1 9 4 7 3.5 .02073-1 8 9 14 4.0 .03074-1 9 4 7 4 .02075-1 8 7 9 5 .020
72-1 Tungsten Wire Basket, 9 turns,4mm I.D. x 7mm H, .020" dia.,each
73-1 Tungsten Wire Basket, 8 turns,9mm I.D. x 14mm H, .030"dia., each
74-1 Tungsten Wire Basket, 9 turns,4mm I.D. x 7mm H, .020" dia.,each
75-1 Tungsten Wire Basket, 8 turns,7mm I.D. x 9mm H, .020" dia.,each
3-StrandTungstenWireBasket0.020" (0.51mm) diameter wire, 2" L(51mm), 3-1⁄2 turns, top inside diam-eter 0.1" (2.54mm), height 0.275"(mm). For use with the Cressington208C and 308R metal evaporationaccessory.
76 Tungsten Wire Basket,3-Strand, pkg/10
Molybdenum Foilaperture cleaning, evapo-ration, experimentation86 Molybdenum Foil, 0.002" thick
(0.05mm), 6 x 6" (15.2x15.2cm),each
Vacuum Evaporation Supplies
5TED PELLA, INC. Phone: 530-243-2200 or 800-237-3526 (USA) FAX: 530-243-3761Domestic (USA): [email protected] International: [email protected] www.tedpella.com
Tungsten Filaments, Coiled
3-wire coiled tungsten filament,0.025" (0.635mm) diameter, 6 coils,4" L (10cm), coil length 1-3⁄4"(4.5cm), 1⁄4"( 6.3mm) ID of coil.84-20 Tungsten Filament, 6 Coils,
pkg/5
3-wire coiled tungsten filament,0.030" (0.76mm) diameter, 14 coils,6" L (15cm), coil length 2-1⁄2" (6.3mm),5⁄16" (7.9mm) ID of coil.84-26 Tungsten Filament, 14 Coils,
pkg/5
3-wire coiled tungsten filament,0.025" (0.635mm) diameter, 6 coils,1-7⁄8" L (47.6mm), coil length 1"(25.4 mm), 3⁄16" (4.8mm) ID of coil.84-19 Tungsten Filament, 6 Coils,
each
3-wire coiled tungsten filament,0.020" (0.51mm) diameter, 6 coils, 2"L (5cm), coil length 3⁄4" (19.1 mm),1⁄8" (3.2mm) ID of coil. For use withthe Cressington 208C and 308Rmetal evaporation accessory.84-16 Tungsten Filament, 6 Coils,
pkg/10
Wires for VacuumEvaporationDeposition
Pricing Market sensitivity for metals causes price fluctuations.Please contact us for current pricing.
Metric EnglishProd. No. Wire Description Diameter Length Diameter Length20/10-1 Aluminum 0.25mm 15.2m .010" 50 ft20/15-1 Aluminum 0.38mm 15.2m .015" 50 ft21-2 Gold 0.20mm 61cm .008" 2 ft
5 x 61cm 5 x 2 ft21-10 Gold 0.20mm 300cm .008" 10 ft21-50 Gold 0.20mm 15.2m .008" 50 ft21-100 Gold 0.20mm 30.4m .008" 100 ft22-2 Gold/Palladium 60:40 0.20mm 6.1m .008" 2 ft22-10 Gold/Palladium 60:40 0.20mm 3.05m .008" 10 ft23-2 Platinum 0.20mm 61cm .008" 2 ft23-10 Platinum 0.20mm 305cm .008" 10 ft25-2 Silver 0.20mm 61cm .008" 2 ft
5 x 61cm 5 x 2ft25 x 61cm 25 x 2 ft50 x 61cm 50 x 2ft
25-10 Silver 0.20mm 305cm .008" 10 ft25-50 Silver 0.20mm 15.2m .008" 50 ft26-2 Palladium 0.20mm 61cm .008" 2 ft
5 x 61cm 5 x2 ft
TungstenWires,Vacuum Grade, Cleaned and CoiledMetric English
Prod. No. Wire Description Diameter Length Diameter Length27-20 Tungsten 0.51mm 6.1m .020" 20 ft
5 x 6.1m 5 x 20 ft27-100 Tungsten 0.51mm 30.5m .020" 100 ft27-2-20 Tungsten 0.64mm 6.1m .025" 20 ft
5 x 6.1m 5 x 20 ft27-3-20 Tungsten 0.76mm 6.1m .030" 20 ft
5 x 6.1m 5 x 20 ft27-4-20 Tungsten 0.89 6.1m .035" 20 ft27-11 Tungsten 0.13mm 6.1m .005" 20 ft
Vacuum Evaporation Supplies
6 TED PELLA, INC.
Apiezon® GreasesNo silicones. Excellent general purpose vacuum grease. Fully soluble inhydrocarbon and chlorinated solvents. Not for use above 30°CApiezon L Grease Ultra high vacuum grease, silicone and halogen freeApiezon M Grease High vacuum grease, silicone and halogen freeApiezon N Grease Cryogenic high vacuum grease, silicone and halogenfreeApiezon T Grease Medium temperature vacuum grease, silicone freeApiezon H Grease High temperature vacuum grease, silicone freeApiezon AP101 Anti seize vacuum grease, silicone freeApiezon AP100 Ultra high vacuum lubricating grease, silicone free
Typical Properties AP101 AP100 H Grease L Grease M Grease N Grease T GreaseMain areas of application General Lubricating High High General Cryogenic Medium
Purpose Temperature Vacuum Vacuum TemperatureTypical Working -40 to 180 10 to 30 -10 to 240 10 to 30 10 to 30 -269 to 30 10 to 120Temperature Range, °CMelting Point- >200 47 >250 47 44 43 125ASTM.D 566, °CVapor Pressure, <1.0 x 10-5 7.0 x 10-11 1.7 x 10-9 7.0 x 10-11 1.7 x 10-9 6.0 x 10-10 4.6 x 10-9
Torr @ 20°CRelative Density @ 20°C 0.981 1.042 0.918 0.896 0.894 0.911 0.912Resistant to Radiation N/R N/R N/R Yes Yes N/R N/RLubricity 4 Ball Test 450 450 250 150 140 150 250ASTM.D 2763 (IP239), kgOutgassing characteristics-ASTM.E 595-90TML N/A <1% <1% <1% N/A <1% N/ACVCM N/A <0.1% <0.1% <0.1% N/A <0.1% N/ACoefficient of expansion 0.00066 N/A 0.00077 0.00076 0.00075 0.00072 0.00073per °C over 20-30°CThermal conductivity N/A N/A 0.216 0.202 0.192 0.230 0.176@20°C, w/m °CElectrical strength, N/A N/A 800 730 850 820 730V/mil (0."001)
Apiezon®GreasesOrderingInformation
891-2 Apiezon Type L, 25g tube,each
891-104 Apiezon Type L, 50g tube,each
891-1 Apiezon Type M, 25g tube,each
891-12 Apiezon Type M, 100g tube,each
891-101 Apiezon Type M, Bulk 4 kg891-4 Apiezon Type N, 25g tube,
each891-120 Apiezon Type T,
25g tube, each891-3 Apiezon Type H, 25g tube,
each891-150 Apiezon AP100, 25g tube,
each891-152 Apiezon AP100, 50g tube,
each891-160 Apiezon AP101, 50g tube,
each891-162 Apiezon AP101, Bulk 4 kg
Vacuum Evaporation Supplies
7TED PELLA, INC. Phone: 530-243-2200 or 800-237-3526 (USA) FAX: 530-243-3761Domestic (USA): [email protected] International: [email protected] www.tedpella.com
Braycote® Micronic 803 and803Vacuum Greasesperfluoroether greases; wide tem-perature range; low volatilityultra-high vacuum applicationsBraycote Micronic 803 is filtered forultimate cleanliness. It will providethe kind of purity required for usewith vacuum systems employingLaB6 filaments.It is stable under high vacuum andhas a temperature range of -63C to232°C (below 80°F to >499°F). 803micronic was developed for applica-tions involving long-term exposurewhere high temperature or hard vac-uum is expected. It is acceptable forclean room applications.Standard Braycote 803 has nearlythe same specifications and doeswithstand high temperatures and isused for hard vacuum. Both typesexhibit excellent shelf life because oftheir inertness. They are white col-ored and odorless. Lubricity for bothtypes is retained under these adverseconditions.891-18 Braycote 803 VacuumGrease, 56g
891-19 Braycote Micronic 803Vacuum Grease, 56g
Crystal SubstratesSingle crystalpotassium bro-mide or sodiumchloride formsan excellent sub-strate on which to evaporate metallicfilms. By using special preparativeprocedures, single crystal films canbe produced.The material is supplied in the formof a (100) orientation, 10mm squarecrystal, 50mm in length. Pieces of 1-2mm thickness are cleaved to be usedas substrates.46-2 NaCl Crystal, 10 x 10 x 50mm,
each46-6 KBr Crystal, 10 x 10 x 50mm,
each
Dow Corning®vacuum grease, general lab useA silicone lubricant for glass stop-cocks, joints and glass-rubber con-nections. Stable from -40°C to+260°C. Not for use in electronmicroscopes.891-7 Dow Corning Vacuum Grease,
150g tube, each
Diffusion Pump OilSantovac® 5 Polyphenyl EtherVacuum Pump Fluidexcellent forTEM, SEMOperates efficiently, economicallyand safely in diffusion pumps inproperly designed systems to pro-duce ultra-high vacuums in the 10-10torr range. A wide liquid range, lowvapor pressure and balance of prop-erties make it an ideal working fluidin diffusion pumps.Extremely low vapor pressure resultsin low ultimate pressures. The vaporpressure of Santovac® 5 at 25°C is 4x 10-10 as determined by extrapola-tion from higher temperature data.Together with low backstreaming
characteristics, 10-10 torr vacuumscan be obtained in well designed sys-tems without the use of nitrogentraps.Low backstreaming. Santovac® 5pump fluid can be used for electroniccomponent manufacture, laboratory,analytical, instrument and researchapplications.Santovac® 5 offers unusually highthermal and oxidation stability, withisoteniscope tests showing thermalstability at 465°C (870°F). May dis-color with use but this does notaffect its operation. Oxidation andcorrosion tests, and field experiencehave shown that Santovac® 5 has lit-tle tendency to increase in viscosityduring use.Typical Properties of Santovac® 5Vapor Pressure at 25°C . . . . 4 x 10-10 torrBoiling Point at 0.5 torr . . . . . . . . . 275°CSpecific Gravity, 25/25°C . . . . . . . . 1.198Viscosityat 27°C . . . . . . . . . . . . . . . . . . . . 1000csat 38°C . . . . . . . . . . . . . . . . . . . . . 363csat 99°C . . . . . . . . . . . . . . . . . . . . 13.1csat 149°C . . . . . . . . . . . . . . . . . . . . 4.5csat 204°C . . . . . . . . . . . . . . . . . . . . 2.1csat 260°C . . . . . . . . . . . . . . . . . . . . 1.2cs
Pour Point . . . . . . . . . . . . . . . . . . . . . 5°CFlash Point (COC) . . . . . . . . . . . . . 288°CFire Point (COC) . . . . . . . . . . . . . . 349°CAutogeneous IgnitionTemperature . . . . . . . . . . . . . . . . 590°C
Refractive index, ND25 . . . . . . . . . . 1.6306
Densityat 20°C . . . . . . . . . . . . . . . . . . . . . 1.204at 38°C . . . . . . . . . . . . . . . . . . . . . 1.187
891-50 Santovac 5 Diffusion PumpOil, 100ml
891-51 Santovac 5 Diffusion PumpOil, 500ml
Vacuum Hoseheavy wall, pure gum rubber, 2 sizes1⁄2" ID (12.7mm)894-5 1⁄2" ID Vacuum Hose, per ft3⁄4" ID (19mm)894-7 3⁄4" ID Vacuum Hose, per ft
TED PELLA, INC.Microscopy Products for Science and Industry
4595 Mountain Lakes Blvd., Redding, CA 96003-1448Phone: 530-243-2200 or 800-237-3526 (USA) FAX: 530-243-3761Domestic (USA): [email protected] International: [email protected]
©Ted Pella, Inc. All Rights Reserved. Printed in USA 7-08
Vacuum Evaporation Supplies
Exhaust Filter for 7010 Rotary Pump(mist eliminators)
Filter for removing oil mist from vacuum pump exhaust in Prod. No. 7010 and 7010-220 Rotary Pumps, creates a cleaner work environment for operators and surroundingequipment.
9609 Exhaust Filter, for #7010 or 7010-220 Rotary Pump, each
Exhaust Filters for Vacuum RotaryVane PumpsFilters for removing oil mist from exhaust in the VRL and Edwards rotary vanepumps.
Permits discharge into clean work areas. Return collected oil to sump or discard.Rugged construction, simple installation. For non-hazardous, non-corrosive applica-tions.
92060 Exhaust Filter, Max Flow Rate 3CFM (e.g., Edwards E2M2 or RV5#92033/92033-220), including adapter, each
92061 Exhaust Filter, Max Flow Rate 3CFM (e.g., VRL 100-3.5 #92080; EdwardsE2M2 or RV5 #92033/92033-220), without adapter
92063 Exhaust Filter Adapter, NW25 to 1⁄2" NPT, aluminum, for VRL 100-3.5#92080
92060
ForelineTrapsHighly recommended to prevent oil backstreaming from rotary vanepumps. Keeps your vacuum system clean in applications where pumps arerunning constantly. Protect vacuum gauges when mounted in front of thegauges. These compact, reliable and efficient foreline traps offer maximummounting flexibility and have the following features:
• Orientation in any direction - spring loaded sorbent basket• Positive creep proof design with O-ring seal• Suitable for pumps up to 34m3/hr, 20cfm, 550 l/min• Leak tested to better than 2 x 109 scc/sec• Available in both Right Angle and Inline design• Available with both NW16 and NW25 flanges• No tools needed for easy sorbent replacement• Aluminum body and sorbent basket, 316 StS spring
92090-10 Inline Style Foreline Trap NW16, each
92090-20 Inline Style Foreline Trap NW25, each
92090-30 Right Angle Foreline Trap NW16, each
92090-40 Right Angle Foreline Trap NW25, each
92090-50 Activated Alumina Sorbent, 300ml for two charges, pk/300ml, each