VA SERIES HEAVY DUTY VERTICAL CLAMPS - Brauer › files › pdf › 16_VA Series...MODEL VA700TV...
16
VA SERIES HEAVY DUTY VERTICAL CLAMPS ® ● Features: All VA series clamps are designed to be adaptable and durable, and to withstand abuse in heavy duty applications. The new VA300 series helps fill the gap at the smaller end of the range. Only manufactured at Brauer, they have a phosphated corrosion resistant finish. Models VA300S, VA700S, VA1200S and VA2400S comprise a basic toggle mechanism onto which can be welded at the desired angle the clamping arm and handle which can be specified as accessories. These models feature a swivel base which is welded at the desired angle to the mechanism, and then welded either directly to a fixture, or alternatively to a base which is offered as an accessory for bolt mounting. Models VA300T, VA700T, VA1200T, and VA2400T share all the features of the above models, but with a straight base which can be directly bolt mounted or welded to a fixture, or alternatively to the accessory base for bolt mounting. Models VA300T, VA700/1A, VA1200/1A and VA2400/1A are similar to the type ‘T’models, but with a handle with a PVC grip fitted vertically, and a longer stub clamping arm which can be modified and the spindle retainer supplied welded in the desired position. Models VA300T, VA700/2C, VA1200/2C and VA2400/2C feature a flanged base with holes for bolt mounting, a handle with PVC grip fitted vertically, and a fixed spindle or setscrew position which does not require welding. ● Specification: The main components are of steel, the forked lower handles being precision alloy steel castings, and all axles of hardened steel running in either hardened bushes or directly in the close- toleranced holes of hardened parts. The clamps are finished chemi-black. ● Installation: When welding the swivel base of the type ‘S’ models to the clamp mechanism ensure that the full length of the adjoining surfaces are welded. Ensure that welding spatter does not enter the slots which form the forward stop of the mechanism. The handle pivot bolt may be adjusted if required to remove excess free play from the mechanism. Frequent lubrication will extend the life of the clamp.
Transcript of VA SERIES HEAVY DUTY VERTICAL CLAMPS - Brauer › files › pdf › 16_VA Series...MODEL VA700TV...
-
VA SERIES HEAVY DUTYVERTICAL CLAMPS
®
● Features:
All VA series clamps are designed to be adaptable and durable, and to withstand abuse in heavyduty applications.
The new VA300 series helps fill the gap at the smaller end of the range. Only manufactured atBrauer, they have a phosphated corrosion resistant finish.
Models VA300S, VA700S, VA1200S and VA2400S comprise a basic toggle mechanism onto whichcan be welded at the desired angle the clamping arm and handle which can be specified asaccessories. These models feature a swivel base which is welded at the desired angle to themechanism, and then welded either directly to a fixture, or alternatively to a base which is offeredas an accessory for bolt mounting.
Models VA300T, VA700T, VA1200T, and VA2400T share all the features of the above models, butwith a straight base which can be directly bolt mounted or welded to a fixture, or alternatively tothe accessory base for bolt mounting.
Models VA300T, VA700/1A, VA1200/1A and VA2400/1A are similar to the type ‘T’ models, but witha handle with a PVC grip fitted vertically, and a longer stub clamping arm which can be modifiedand the spindle retainer supplied welded in the desired position.
Models VA300T, VA700/2C, VA1200/2C and VA2400/2C feature a flanged base with holes for boltmounting, a handle with PVC grip fitted vertically, and a fixed spindle or setscrew position whichdoes not require welding.
● Specification:
The main components are of steel, the forked lower handles being precision alloy steel castings,and all axles of hardened steel running in either hardened bushes or directly in the close-toleranced holes of hardened parts. The clamps are finished chemi-black.
● Installation:
When welding the swivel base of the type ‘S’ models to the clamp mechanism ensure that the fulllength of the adjoining surfaces are welded. Ensure that welding spatter does not enter the slotswhich form the forward stop of the mechanism.
The handle pivot bolt may be adjusted if required to remove excess free play from the mechanism.
Frequent lubrication will extend the life of the clamp.
-
TELEPHONE: 00 44 (0)1908 374022 E-Mail: [email protected]: 00 44 (0)1908 641628 www.brauer.co.uk
®
HEAVY-DUTY VERTICAL CLAMPS
50
Arm:Stub nose for welded extension.Base:Swivel for welding in the desiredposition.Nominal Holding Force:300 daNWeight:0.15 KgSee “Accessories” for other items.
Arm:Stub nose for welded extension.Base:Straight.Nominal Holding Force:300 daNWeight:0.15 KgSee “Accessories” for other items.
VA300 SERIESMODEL VA300/S
VA300 SERIESMODEL VA300/T
for pneumatic modelssee page 6
for pneumatic modelssee page 6
-
TELEPHONE: 00 44 (0)1908 374022 E-Mail: [email protected]: 00 44 (0)1908 641628 www.brauer.co.uk
®
HEAVY-DUTY VERTICAL CLAMPS
51
Arm:Stub nose for welded extension.Base:Flanged.Nominal Holding Force:300 daNWeight:0.20 KgSee “Accessories” for other items.
VA300 SERIESMODEL VA300/2S
Arm:The spindle is adjustable along thearm.Base:Straight.Nominal Holding Force:300 daNWeight:0.25 Kg
Supplied complete with:MB0650 Set screw & nuts.FW 06/12 Flanged washer.See “Accessories” for other items.
VA300 SERIESMODEL VA300/1B
for pneumatic modelssee page 6
for pneumatic modelssee page 6
-
TELEPHONE: 00 44 (0)1908 374022 E-Mail: [email protected]: 00 44 (0)1908 641628 www.brauer.co.uk
®
HEAVY-DUTY VERTICAL CLAMPS
52
Arm:The spindle is adjustable along thearm.Base:Flanged.Nominal Holding Force:300 daNWeight:0.25 KgSupplied complete with:MB0650 Set screw & nuts.FW 06/12 Flanged washer.See “Accessories” for other items.
VA300 SERIESMODEL VA300/2B
Arm:The spindle is adjustable along thearm.Base:Flanged.Nominal Holding Force:300 daNWeight:0.25 KgSupplied complete with:MB0650 Set screw & nuts.FW 06/12 Flanged washer.See “Accessories” for other items.
VA300 SERIESMODEL VA300/2BT
for pneumatic modelssee page 6
for pneumatic modelssee page 6
-
TELEPHONE: 00 44 (0)1908 374022 E-Mail: [email protected]: 00 44 (0)1908 641628 www.brauer.co.uk
®
HEAVY-DUTY VERTICAL CLAMPS
53
Model A3 Handle: Weight:For welding at the 0.056 Kgdesired angle to VA300S& VA300T.
Model B3 Grip: Weight:To fit A3 handle. 0.011 Kg
Model C3 Arm: Weight:For extending the stub 0.083 Kgarms of VA300S & VA300T.
Model D3 Base: Weight:For bolt mounting VA300S 0.040 Kg& VA300T.
VA300 SERIESACCESSORIES
Arm:Stub nose for welded extensions.Base:Swivel for welding in the desiredposition.Nominal Holding Force:700 daNWeight:0.70 KgSee “Features and installationinformation” page for installationinstructions.See “Accessories” for other items.
VA700 SERIESMODEL VA700S
Arm opens through 205°
Handle opens through 130°
for pneumatic modelssee page 6
-
TELEPHONE: 00 44 (0)1908 374022 E-Mail: [email protected]: 00 44 (0)1908 641628 www.brauer.co.uk
®
HEAVY-DUTY VERTICAL CLAMPS
54
VA700 SERIESMODEL VA700T
Arm opens through 205°
Handle opens through 130°
Arm:Stub nose for welded extensions.Base:Straight.Nominal Holding Force:700 daNWeight:0.80 KgSee “Features and installationinformation” page for installationinstructions.See “Accessories” for other items.
Arm:Solid arm.Base:Straight.Nominal Holding Force:700 daNWeight:1.10 KgSupplied complete with:Spindle retainer.MB12100 Setscrew & nuts.See “Accessories” for other items.
VA700 SERIESMODEL VA700/1A
Arm opens through 205°
Handle opens through 130°
for pneumatic modelssee page 6
for pneumatic modelssee page 6
-
TELEPHONE: 00 44 (0)1908 374022 E-Mail: [email protected]: 00 44 (0)1908 641628 www.brauer.co.uk
®
HEAVY-DUTY VERTICAL CLAMPS
55
Arm:The spindle is in a fixed position.Base:Flanged.Nominal Holding Force:700 daNWeight:1.25 KgSupplied complete with:MB12100 Setscrew & nuts.See “Accessories” for other items.
VA700 SERIESMODEL VA700/2C
Arm opens through 180°
Handle opens through 120°
Arm:Stub nose with mounting holes.Base:Straight with mounting holes.Nominal Holding Force:700 daNWeight:1.01kgSee “Accessories” for other items.
VA700 SERIESMODEL VA700TD
for pneumatic modelssee page 6
for pneumatic modelssee page 6
CLAMP & ARM SOLD AS SEPARATE ITEMS
For dimensionssee
VA700T
FRONT ARM - C7D CLAMP - VA700TD
-
TELEPHONE: 00 44 (0)1908 374022 E-Mail: [email protected]: 00 44 (0)1908 641628 www.brauer.co.uk
®
HEAVY-DUTY VERTICAL CLAMPS
56
Arm:Solid arm with mounting holes.Base:Straight with mounting holes.Nominal Holding Force:700 daNWeight:1.01kgSee “Accessories” for other items.
VA700 SERIESMODEL VA700TP
Arm:Solid arm with mounting holes.Base:Straight with mounting holes.Nominal Holding Force:700 daNWeight:1.01kgSee “Accessories” for other items.
VA700 SERIESMODEL VA700TV
OptionalLocking
Mechanismavailable
for pneumatic modelssee page 6
for pneumatic modelssee page 6
All dimensions not shownremain as per VA700T
All dimensions not shownremain as per VA700/1A
-
TELEPHONE: 00 44 (0)1908 374022 E-Mail: [email protected]: 00 44 (0)1908 641628 www.brauer.co.uk
®
HEAVY-DUTY VERTICAL CLAMPS
57
Model A7 Handle: Weight:For welding at the 0.20 Kgdesired angle toVA700S & VA700T.
Model B7 Grip: Weight:To fit A7 handle. 0.01 Kg
Model C7 Arm: Weight:For extending the stub 0.21 Kgarms of VA700S &VA700T.
Model D7 Base: Weight:For bolt mounting 0.11 KgVA700S and VA700T.
VA700 SERIESACCESSORIES
HandlePart No. A7
GripPart No. B7
Arm Part No. C7
Base Part No. D7
VA1200 SERIESMODEL VA1200S
Arm opens through 195°
Handle opens through 130°
Arm:Stub nose for welded extensions.Base:Swivel for welding in the desiredposition.Nominal Holding Force:1200 daNWeight:1.30 KgSee “Accessories” for other items.
for pneumatic modelssee page 7
-
TELEPHONE: 00 44 (0)1908 374022 E-Mail: [email protected]: 00 44 (0)1908 641628 www.brauer.co.uk
®
HEAVY-DUTY VERTICAL CLAMPS
58
Arm:Stub nose for welded extensions.Base:Straight.Nominal Holding Force:1200 daNWeight:1.45 KgSee “Accessories” for other items.
VA1200 SERIESMODEL VA1200T
VA1200 SERIESMODEL VA1200/1A
Arm opens through 195°
Handle opens through 130°
Arm opens through 195°
Handle opens through 130°
Arm:Solid arm.Base:Straight.Nominal Holding Force:1200 daNWeight:1.80 KgSupplied complete with:Spindle retainer.MB12100 Setscrew & nuts.See “Accessories” for other items.
for pneumatic modelssee page 7
for pneumatic modelssee page 7
-
TELEPHONE: 00 44 (0)1908 374022 E-Mail: [email protected]: 00 44 (0)1908 641628 www.brauer.co.uk
®
HEAVY-DUTY VERTICAL CLAMPS
59
Arm:The spindle is in a fixed position.Base:Flanged.Nominal Holding Force:1200 daNWeight:1.95 KgSupplied complete with:MB12100 Setscrew & nuts.See “Accessories” for other items.
VA1200 SERIESMODEL VA1200/2C
Arm opens through 180°
Handle opensthrough 125°
Arm:Stub nose with mounting holes.Base:Straight with mounting holes.Nominal Holding Force:1200 daNWeight:1.87kgSee “Accessories” for other items.
VA1200 SERIESMODEL VA1200TD
for pneumatic modelssee page 7
for pneumatic modelssee page 7
CLAMP & ARM SOLD AS SEPARATE ITEMS
All dimensions not shownremain as per VA1200T
FRONT ARM - C12D CLAMP - VA1200TD
-
TELEPHONE: 00 44 (0)1908 374022 E-Mail: [email protected]: 00 44 (0)1908 641628 www.brauer.co.uk
®
HEAVY-DUTY VERTICAL CLAMPS
60
Arm:Solid arm with mounting holes.Base:Straight with mounting holes.Nominal Holding Force:1200 daNWeight:1.87kgSee “Accessories” for other items.
VA1200 SERIESMODEL VA1200TP
Model A12 Handle: Weight:For welding at the 0.30 Kgdesired angle toVA1200S & VA1200T.
Model B12 Grip: Weight:To fit A12 handle. 0.01 Kg
Model C12 Arm: Weight:For extending the stub 0.42 Kgarms of VA1200S &VA1200T.
Model D12 Base: Weight:For bolt mounting 0.17 KgVA1200S & VA1200T.
VA1200 SERIESACCESSORIES
HandlePart No. A12
GripPart No. B12
Arm Part No. C12
Base Part No. D12
for pneumatic modelssee page 7
All dimensions not shownremain as per VA1200T
-
TELEPHONE: 00 44 (0)1908 374022 E-Mail: [email protected]: 00 44 (0)1908 641628 www.brauer.co.uk
®
HEAVY-DUTY VERTICAL CLAMPS
61
VA2400 SERIESMODEL VA2400S
Arm opens through 195°
Handle opens through 130°
Arm:Stub nose for welded extensions.Base:Swivel for welding in the desiredposition.Nominal Holding Force:2400 daNWeight:2.90 KgSee “Accessories” for other items.
Arm:Stub nose for welded extensions.Base:Straight.Nominal Holding Force:2400 daNWeight:3.20 KgSee “Accessories” for other items.
VA2400 SERIESMODEL VA2400T
Arm opens through 195°
Handle opens through 130°
for pneumatic modelssee page 7
for pneumatic modelssee page 7
-
TELEPHONE: 00 44 (0)1908 374022 E-Mail: [email protected]: 00 44 (0)1908 641628 www.brauer.co.uk
®
HEAVY-DUTY VERTICAL CLAMPS
62
Arm:The spindle is in a fixed position.Base:Flanged.Nominal Holding Force:2400 daNWeight:4.10 KgSupplied complete with:MB16150 Setscrew & nuts.See “Accessories” for other items.
VA2400 SERIESMODEL VA2400/1A
VA2400 SERIESMODEL VA2400/2C
Arm opens through 195°
Handle opensthrough 130°
Arm opens through 195°
Handle opens through 130°
Arm:Solid arm.Base:Straight.Nominal Holding Force:2400 daNWeight:3.75 KgSupplied complete with:Spindle retainer.MB16150 Setscrew & nuts.See “Accessories” for other items.
for pneumatic modelssee page 7
for pneumatic modelssee page 7
-
TELEPHONE: 00 44 (0)1908 374022 E-Mail: [email protected]: 00 44 (0)1908 641628 www.brauer.co.uk
®
HEAVY-DUTY VERTICAL CLAMPS
63
Arm:Stub nose with mounting holes.Base:Straight with mounting holes.Nominal Holding Force:2400 daNWeight:3.96kgSee “Accessories” for other items.
VA2400 SERIESMODEL VA2400TD
Arm:Solid arm with mounting holes.Base:Straight with mounting holes.Nominal Holding Force:2400 daNWeight:3.96kgSee “Accessories” for other items.
VA2400 SERIESMODEL VA2400TP
for pneumatic modelssee page 7
for pneumatic modelssee page 7
CLAMP & ARM SOLD AS SEPARATE ITEMS
All dimensions not shownremain as per VA2400T
All dimensions not shownremain as per VA2400T
FRONT ARM - C24D CLAMP - VA2400TD
-
TELEPHONE: 00 44 (0)1908 374022 E-Mail: [email protected]: 00 44 (0)1908 641628 www.brauer.co.uk
®
HEAVY-DUTY VERTICAL CLAMPS
64
Model A24 Handle: Weight:For welding at the 0.39Kgdesired angle toVA2400S & VA2400T.
Model B24 Grip: Weight:To fit A24 handle. 0.02 Kg
Model C24 Arm: Weight:For extending the stub 0.76 Kgarms of VA2400S& VA2400T.
Model D24 Base: Weight:For bolt mounting 0.26 KgVA2400S & VA2400T.
VA2400 SERIESACCESSORIES
HandlePart No. A24
GripPart No. B24
Arm Part No. C24
Base Part No. D24
