V-Ray Render Optimization

8/19/2019 V-Ray Render Optimization

1/13

1/12/2016 V-Ray Render Optimization | Akin Bilgic

http://www.cggallery.com/tutorials/vray_optimization/

HomeGalleryTutorialsAboutContact

V-Ray Render Optimization

An in-depth tutorial on optimizing V-Ray to deliver the

highest quality renders with the fastest render times.

v1.3

- August 2014

Changelog

v1.0 - December 16 2013 - Public Release.

v1.1 - December 22 2013 - Improved the layout of the Optimization Procedure section, and added a note about GI controlling VRayHairMtl's reflection/refraction qualit

v1.2 - February 01 2014 - Added information about Specular Highlights, and elaborated Global Illumination methods in the Optimization Procedure.

v1.3 - August 18 2014 - Updated the Optimization Procedure section to no longer rely on the 'Default Lights' setting, which sometimes created issues for indoor scenes.

Intro

This tutorial attempts to cover the process of optimizing your V-Ray render settings to get the best possible render quality and fastest render time for a given scene.

There's often a lot of confusion surrounding V-Ray's sampling methods and what 'ideal' settings are. Many times you'll see artists adopt the 'Universal V-Ray Settings' ofhaving the Image Sampler (Anti-Aliasing, or AA) Max Subdivs value set very high (like 50 or 100), and then simply lowering the noise threshold value until the render

becomes clean enough - thinking that it's the best / fastest that V-Ray can do. But wit h a bit of understanding of how V-Ray works under the hood, you can achieve ahigher quality result WITH faster render times - in some extreme cases ranging between 3x faster to 13x faster than the universal settings.

We'll first cover some of the underlying concepts behind how ray tracing and V-Ray's sampling works. Then we'll go over an example scene to demonstrate exactly howrender can be optimized to be faster and cleaner. Then we'll learn how to identify the different sources of noise a scene can have. And finally I'll provide a step-by-step

procedure to optimi ze any scene to render with an ideal balance of quality and speed.

If you already know the underlying concepts and just want the technical step-by-step procedure, click here to skip right to it.

Raytracing 101

When a render begins, rays are first sent out from our camera and into the scene to gather information about the geometry that will be visible in the final image. Theserays originating from the camera are called Primary Rays (also called Camera Rays or Eye Rays) and are controlled by V-Ray's Image Sampler (also known as Anti-Aliasing or AA).

Whenever a Primary Ray intersects with geometry in the scene, additional rays get sent out from that point of intersection into the rest of the scene to gather informationabout things like Lighting, Shadows, Global Illumination (GI), Reflection, Refraction, Sub-surface Scattering (SSS), etc. These additional rays are called Secondary Rayand are controlled by V-Ray's DMC Sampler.

http://www.cggallery.com/#abouthttp://www.cggallery.com/#galleryhttp://www.cggallery.com/#tutorialshttp://www.cggallery.com/images/tutorials/vray_optimization_example_01.jpghttp://www.cggallery.com/#contacthttp://www.cggallery.com/#homehttp://www.cggallery.com/images/tutorials/vray_optimization_figure_07.jpg


2/13


http://www.cggallery.com/tutorials/vray_optimization/ 2

Figure 01

A simplified diagram of raytracing:Primary Rays are sent out from the camera into the scene, intersect with geometry, and send out various Secondary Rays to further sample the scene.

From this point forward, we'll simply refer to 'Rays' as 'Samples' - because that's what the purpose of a Ray is - to take a Sample of a scene to gather information aboutwhat's going on in it. So basically Rays = Samples.

In order to accurately figure out what's going on in a scene, many Primary and Secondary Samples are needed to be taken. The more a scene gets sampled, the moreinformation V-Ray is able to gather about the scene, and the higher quality the resulting render will be - which means less Noise in the render. This is because Noise iscaused by a lack of information. Noise present in a render means that V-Ray wasn't able to gather enough information about what's going on in a scene. So in order toreduce noise, you need to provide V-Ray with more information - and to provide V-Ray with more information, you need to take more samples.

The amount of Primary Samples sent out into the scene is mainly controlled by the Min Subdivs, Max Subdivs, and Color Threshold settings of the Image Sampler.The amount of Secondary Samples sent out into the scene is mainly controlled by the Subdivs settings from individual Lights / Global Illumination / Materials in thescene, and the Noise Threshold setting of the DMC Sampler. (Noise Threshold is named Adaptive Threshold in V-Ray for Maya)

So to recap the important terms:

Ray = Sample

PrimarySamples =

The samples controlled by V-Ray's Image Sampler (also known as Anti-Aliasing or AA), which is specialized in sampling a scene's Geometry, TexturesDepth of Field, and Motion Blur.

SecondarySamples =

The samples controlled by V-Ray's DMC Sampler, which is specialized in sampling a scene's Lighting, Global Illumination (GI), Shadows, MaterialReflection & Refraction, and Sub-Surface Scattering (SSS).

Noise = A lack of information.

Subdivs = The square root of the actual number of Samples. So Subdivs2 = Samples.

For example: 8 Subdivs = 64 Samples. (82 = 64)

In this tutorial we'll learn how to best utilize these Primary and Secondary Samples to get the highest quality render (lowest amounts of Noise) in the fastest amount of time.

http://www.cggallery.com/images/tutorials/vray_optimization_figure_01.jpg


3/13



Understanding The SampleRate Render Element

The SampleRate render element is one of the most important tools we'll be using to help us optimize our renders. It's V-Ray way of showing us exactly what the ImageSampler (AA) is doing at any given pixel. It does this by assigning a certain color for each pixel in the render according to how many Primary Samples (AA) are beingtaken at that pixel (which can be seen by viewing the SampleRate render element).

A Blue-ish color means a low amount of the available Primary Samples (AA) was taken at the pixel.A Green-ish color means a medium amount of the available Primary Samples (AA) was taken at the pixel.A Red-ish color means a high amount of the available Primary Samples (AA) was taken at the pixel.

Figure 02

The SampleRate render element (right), showing how many of the available Primary Samples are being taken at any pixel of the render (left).

So for a scene with the Image Sampler (AA) set to 1min and 10max Subdivs (meaning 1min and 100max Primary Samples):

A Blue pixel means that 1 Primary Sample was takenA Green pixel means that 50 Primary Samples were takenA Red pixel means that 100 Primary Samples were taken.

And for a scene with the Image Sampler (AA) set to 1min and 100max Subdivs (meaning 1min and 10000max Primary Samples):

A Blue pixel means that 1 Primary Sample was takenA Green pixel means that 5000 Primary Samples were takenA Red pixel means that 10000 Primary Samples were taken.

Example Scene - Understanding How V-Ray Works

For this tutorial, we'll be working with a simple test scene consisting of: A plane with a few spheres on top, various simple materials (including diffuse, glossy reflection,glossy refraction, and SSS), 2 areas lights, and a domelight with an HDRI. Global Illumination is enabled and set to Brute Force + Light Cache. This scene file can bedownloaded HERE.

We'll begin with a baseline render with the following render settings:

Image Sampler (AA) set to 1min & 8max Subdivs.Lights, GI, and Materials all set to the default of 8 Subdivs.

Noise Threshold set to the default of 0.01.

http://www.cggallery.com/images/tutorials/vray_optimization_figure_02.jpghttp://www.cggallery.com/files/vray_optimization.zip


4/13



All other render settings are left at their defaults.

Figure 03

Baseline Render1min & 8max Subdivs = Image Sampler (AA)8 Subdivs = Lights, GI, and Materials each.

Now lets go over exactly what's happening in this baseline render. Through the render settings, you're telling V-Ray:

"I'm allowing you to use up to 64 (8 Subdivs) Primary Samples (AA) per pixel to figure out what's going on in this scene and reduce the noise as close as you can to my

specified noise threshold... BUT for each of those Primary Samples you take, you're only allowed to take 1 additional Secondary Sample to figure out what's going on foeach Light, GI, and Material."

At this point you may be asking:

"Wait, only 1 Secondary Sample for the Lights, GI, and Materials each? Shouldn't it be 64 Samples (8 Subdivs) as we've set them?"

Well it's important to note that even though the Lights, GI, and Materials are set to 64 Samples (8 Subdivs) each - V-Ray internally divides this value by the AA MaxSamples value of your scene. So instead of the 64 Samples for the light and material each as you might expect, this gets divided by the AA Max of 64 Samples (8Subdivs), which results in only 1 Secondary Sample being taken for the Lights, GI, and Materials each. (64 Secondary Samples / 64 Primary Samples = 1 SecondarySample).

The reason V-Ray does this is because it's internal formulas are set up in a way that attempts to automatically balance it's two samplers. The thinking behind this is thatwith more Primary Samples being taken of your scene, a proportionally smaller amount of Secondary Samples are needed to figure out exactly what's happening in thescene (which we'll soon learn, this isn't always desirable). This balancing of the Image Sampler and the DMC Sampler can be a bit confusing at first, but the important

thing to take away is this: Whenever you increase your Image Sampler (AA) settings, V-Ray tries to compensate by internally decreasing your DMC Sampler settings.Later on if you're interested in learning more about how V-Rays internal formulas work - you can check out the DMC Calculator I've coded - but for right now it's notnecessary.

So lets get back to the rendering:

V-Ray finishes the render as best as it can manage, but warns you (by the many RED pixels in the SampleRate render element):

"I was NOT able to figure out what's going on in all of this scene according to the level of quality (noise threshold) you want it to be at! - A lot of the time I had to use upall of the 64 Primary Samples with 1 Secondary Sample per Light, GI, and Material you allowed me to use for each pixel, but it still didn't provide me with enoughinformation in those areas."

If we take a look at the render - we'll notice that while the geometric detail (edges of objects) seem fairly clean and defined, there are indeed noisy areas of the image -specifically noticeable in the reflections and shadows. So we've got this noisy baseline render, and we have two options to reduce the noise to meet our desired level of quality (noise threshold):

http://www.cggallery.com/images/tutorials/vray_optimization_figure_03.jpghttp://www.cggallery.com/tutorials/dmc_calculator/


5/13



Option#1 =

Increase AA Max Subdivs - Let V-Ray take more Primary Samples to figure out the scene - but again only 1 additional Secondary Sample for the Lights / GI/ Materials each per Primary Sample.

Option#2 =

Increase Lights / GI / Materials Subdivs - Tell V-Ray to stay at the same amount of Primary Samples - but instead allow it take more Secondary Sampleswith each Primary Sample to better figure out the scene.

Example Scene - Option #1 - Increased AA Max Subdivs

So lets first try what most people usually do to get a high quality (low noise) render - adopt the so-called 'Universal V-Ray Settings' and let V-Ray take as many PrimarySamples (AA) as needed to eliminate the noise.

We'll increase the Image Sampler (AA) to 1min & 100max Subdivs.We'll leave the Lights, GI, and Materials set to 8 Subdivs each.We'll reduce the Noise Threshold to 0.005 to tell V-Ray we really want a noise-free render.

Figure 04

Option #1 Render - Increased AA Max Subdivs1min & 100max Subdivs = Image Sampler (AA)8 Subdivs = Lights, GI, and Materials each.

0.005 = Noise Threshold.

Now lets go over exactly what's happening in this Option #1 render. Through the render settings, you're telling V-Ray:

"I'm allowing you to use up to 10000 (100 subdivs) Primary Samples (AA) per pixel to figure out what's going on in this scene and reduce the noise as close as you can tmy specified noise threshold... BUT for each of those Primary Samples you take, you're only allowed to take 1 additional Secondary Sample to figure out what's going owith the Lights, GI, and Materials each."

Again, remember that even though the Lights, GI, and Materials are set to 64 Samples (8 Subdivs) each - V-Ray internally divides these values by the AA Max Samplesvalue of your scene. So instead of 64 Samples, this gets divided by the AA Max of 10000 Samples (100 Subdivs), which results in the minimum of only 1 SecondarySample being taken for the Lights, GI, and Materials each. (64 Secondary Samples / 10000 Primary Samples = 1 Secondary Sample).

V-Ray finishes the render as best as it can manage, and tells you (by the now mostly BLUE SampleRate render element):

"I was able to figure out all of what's going on in this scene to the level of quality (noise threshold) you want it to be at! - In fact, I was able to figure it out well before Ihad to use all 10000 Primary Samples with 1 Secondary Samples per Lights, GI, and Materials you allowed me for each pixel."



6/13



We take a look at the Option #1 render and see the noise has definitely been improved compared to the baseline render. The render time has increased by 11min 44s(9.8x longer) compared to the Baseline Render, but that's to be expected with a higher quality render, right? At this point, most people would think this is as good as itgets, and call the render FINISHED!

...But what happens if we were to try that Option #2 we discussed earlier? Instead of increasing the AA Max Subdivs, what happens if we instead opted to only increasethe Lights / GI / Materials Subdivs? Well lets find out...

Example Scene - Option #2 - Increased Light / GI / Materials Subdivs

This time we'll try something a little different - we'll tell V-Ray to take same amount of Primary Samples that we originally did in the baseline render - but instead allowV-Ray to take more Secondary Samples with each Primary Sample to better figure out the scene.

We'll leave the Image Sampler (AA) set to the original baseline render's settings of 1min & 8max Subdivs.We'll increase the Lights, GI, and Materials to 80 Subdivs each.We'll leave the Noise Threshold set to the original baseline render's default of 0.01

Figure 05

Option #2 Render - Increased Lights, GI, and Materials Subdivs1min & 8max Subdivs = Image Sampler (AA)80 Subdivs = Lights, GI, and Materials each.0.01 = Noise Threshold.

Once more, lets go over exactly what's happening in this Option #2 render. Through the render settings, you're telling V-Ray:

"I'm allowing you to use up to 64 (8 subdivs) Primary Samples (AA) per pixel to figure out what's going on in this scene and reduce the noise as close as you can to myspecified noise threshold... AND for each of those Primary Samples you take, you're allowed to take up to 100 additional Secondary Samples to figure out what's goingon with the Lights, GI, and Materials each."

Again, remember that even though the Lights, GI, and Materials are set to 6400 Samples (80 Subdivs) each - V-Ray automatically divides these values by the AA MaxSamples value of your scene. So instead of 6400 Samples, this gets divided by the AA Max of 64 Samples (8 Subdivs), which results in only 100 Secondary Samples

being taken for the Lights, GI, and Materials each. (6400 Sec ondary Samples / 64 Primary Samples = 100 Secondary Sample).

V-Ray finishes the render as best as it can manage, and tells you (through the SampleRate render element):

"I was able to figure out almost all of what's going on in this scene to the level of quality (noise threshold) you want it to be at! - In fact, most of the time I was able tofigure it out well before I had to use all 64 Primary Samples per pixel! All those extra 100 Secondary Samples per Light, GI, and Material provided each Primary Sample



7/13



with so much more information this time!"

We take a look at the Option #2 render and see the noise has definitely been improved compared to the baseline render. The render time has increased by 4m 38s (4.5xLonger) compared to the Baseline Render, but that's to be expected with a higher quality render.

But here's where things start to get interesting...

When we compare Option #2's render against Option #1's render, we can see that Option #2 gave us a cleaner render!

And look at that! - Option #2 finished 2.2x faster than Option #1! - 5m 58s for Option #2 versus 13m 04s for Option #1!

Figure 06

Option #1 Render on the left, and Option #2 Render on the right.At the bottom, the renders zoomed 400% to better show noise levels.

Why is this? Why did increasing the DMC Sampler settings (Lights / GI / Materials Subdivs) rather than increasing the Image Sampler (AA) settings result in a cleaner AND faster render for this scene? We even set Option #1 to have a lower noise threshold, yet it still turned out noisier than option #2! Well the answer lies in what weoriginally noticed about the Baseline render...

How Optimization Works

In our Baseline Render, we saw that while the edges of objects looked clean and defined, the noise seemed to reside primarily in the reflections and shadows. Well, if you



8/13



remember what we learned earlier: Primary Samples (AA) specialize in figuring out the geometry, textures, depth of field, and motion blur in a scene. While SecondarySamples specialize in figuring out lighting, GI, shadows, materials, etc.

So in the case of fixing the noise in the Baseline render, the choice between Option #1 and Option #2 is actually a no-brainer! Why use a screwdriver to do a hammer's job? The Image Sampler (AA) had al ready done what it was designed to do - make the geometric detail (edges of objects) clean and defined. So instead of firing a bunchof additional Primary Samples (AA) at the scene to clean up noise - it's better to allocate those additional samples to the DMC Sampler (Lights / GI / Materials Subdivs)so it can properly do what it was designed to do - clean up the noise in the lighting, shadows, GI, reflections, and refractions. There's our answer!

And now can we begin to understand why the 'Universal V-Ray Settings' of 1min and 100max AA is generally not going to be the most efficient method to render a scen- in fact it never was meant to be the most efficient method! The Universal V-Ray Settings were designed to make V-Ray accessible and easy for users who don't care

about render optimization or learning how V-Ray works under the hood. It's simply a method to put V-Ray on auto-pilot. It allows a user to control all render quality byadjusting only one setting - the noise threshold. If there's too much noise in a render, just lower the noise threshold, and V-Ray will keep firing Primary Samples (AA) atthe scene until it eventually reaches the noise threshold - guaranteeing a nice looking render with minimal understanding of how V-Ray works. But that render isgenerally not going to be as clean or render as fast as if you take the time to understand how V-Ray works and balance the Image Sampler and DMC Sampler accordingto a scene's demands!

And just to really drive the point home - the Option #2 Render can still be optimized even further! Using some additional tricks listed in the procedures at the end of thistutorial, we can reduce it's render time from 5m 58s to 4m 53s with only a slight hit in noise amounts! For a final render speed increase of 2.7 times faster than the Optio#1 Render!

Figure 07

Option #1 Render on the left, and Option #2 Render optimized even further on the right. For a total render speed increase of 2.7x!

Here's another example of optimization, this time with a more production oriented scene...

The optimized render (right) renders nearly 35% faster than the universal settings render (left) while reducing noise and improving render quality. Also note how thereflections have become more accurate - noticeable on the floor towards the end of the hallway.



9/13



Figure 08

'Universal V-Ray Settings' on the left, and the Optimized render on the right.Render scene courtesy of Peter Guthrie

Identifying Sources Of Noise

The key to properly optimizing a render is to correctly identify which aspects of a scene are causing noise, and assigning the right sampler with enough samples to attackthat noise at it's source. Some scenes will require more samples for the Image Sampler, while others (like the ones shown in the examples above) will require moresamples for the DMC Sampler. As a general guideline:

Circumstances where the Image Sampler (AA) will require larger amounts of Primary Samples to eliminate noise:

Fine geometric detail like Hair, Grass, Foliage, etc.Very fine texture detail like weaves, tiny bump map details, etc.Scenes with shallow Depth of Field or heavy Motion Blur.

http://www.cggallery.com/images/tutorials/vray_optimization_figure_08.jpghttp://www.peterguthrie.net/


10/13



Circumstances where the DMC Sampler will require larger amounts of Secondary Samples to eliminate noise:

Large light sources that cast soft shadows.Materials with strong glossy Reflection or Refraction.Scenes with prominent Global Illumination - particularly indoor scenes.

Noise caused by the Image Sampler (AA) is luckily very easy to spot to the naked eye. It manifests itself in jagged or unclear object edges, undefined texture detail or effects like Moiré patterns, and grainy depth of field or motion blur.

Noise caused by the DMC Sampler can be a bit trickier to see exactly what's causing it. Luckily we have some handy tools at our disposal to help us figure it out - V-Ray's Render Elements: Lighting, Global Illumination, Specular, Reflection, and Refraction. By looking through these various render elements, you can quickly isolateand check the levels of noise caused by any of these individual aspects of your scene.

Figure 09

By looking at the Reflection render element, we can see the amount of noise caused by material reflections alone.

Optimization Procedure

So now that we have a solid understanding of what can be gained by properly utilizing V-Ray's samplers, and how to identify the sources of noise in our scene, we canfollow a step-by-step procedure to help optimize whatever scene you may be dealing with.

The general idea behind this procedure is to begin by setting the Image Sampler (AA) Max just high enough to clearly define the Geometry, Textures, Depth of Field, anMotion Blur detail in your scene, and then tune each of the DMC Sampler's aspects (Lights/Specular/Shadows, GI, Material Reflection/Refraction) one at a time toeliminate noise. So we'll start with default V-Ray settings, and bring our render to a very basic state to start the optimization process:

1. In V-Ray's Global Settings rollout - uncheck 'Shadows', 'Reflection/Refraction', and 'Glossy Effects' to disable them.2. In V-Ray's GI (Indirect Illumination) tab - disable Global Illumination.3. In V-Ray's Render Elements tab - add: SampleRate, Lighting, Global Illumination, Specular, Reflection, Refraction.4. Optional: Reduce your render frame size for faster feedback during the optimization process.

At this point, your render should be nothing but a very plainly lit diffuse render of your scene. [Example]

Tuning the Image Sampler (AA):

5. Gradually raise the Image Sampler (AA) Max Subdivs value until all geometry edges, t exture detail, depth of field, and motion blur in your scene appears crisp anclear. Check the SampleRate Render Element for red areas and reduce them as needed by increasing your Image Sampler (AA) Subdivs Max value until they only

http://www.cggallery.com/images/tutorials/vray_optimization_figure_09.jpghttp://www.cggallery.com/images/tutorials/vray_optimization_procedure_01.jpg


11/13



reside along the very edges of your object and texture details. Once these details appear nice and crisp, leave your Image Sampler (AA) settings alone.

Tuning the scene's Lighting / Shadows / Speculars:

6. In V-Ray's Global Settings rollout - Check 'Shadows' to re-enable them.At this point your render should have lighting and shadows, but still diffuse materials. [Example]

Notice that noise (along with more red pixels in the SamplerRate render element) has been re-introduced to the render from enabling your scene's Li ghting.7. Raise the Subdivs value in your Lights until the noise in the shadows and lighting become acceptably smooth and clear. It's easiest to see the effect of raising these

Subdivs values by checking your Lighting render element. As you raise these Subdiv values, the red pixels in your SampleRate render element should again bereceding back to the very edges of your objects and textures while most other areas gradually become more blue or green - indicating that less Image Samples (AAare being needed.

A note about Speculars: The quality of specular highlights in your scene are also controlled by your Lights Subdivs value. As a general rule of thumb, once theshadows of a light are free of noise, the specular highlight for that light should also be free of noise. But for now we wont be able to tell since we currently haveGlossy Effects (which Specular Highlights are a part of) globally disabled for this stage of the optimization process. So later on when wrapping up the optimization

process if you notice any noisy specular highlights in the Specular render element, increasing the light's Subdivs value is how to fix it.

Tuning the scene's Global Illumination (GI):

8. In V-Ray's GI (Indirect Illumination) tab - re-enable Global Illumination.I recommend using Brute Force for the primary engine, and Light Cache for the secondary engine unless dealing with specific cases (like a camera fly-through)where using a cached GI method like Irradience Map is more appropriate.At this point your render should have normal lighting, shadows, and now GI, but still diffuse materials. [Example]Again notice that noise (along with more red pixels in the SamplerRate render element) has been re-introduced to the render from enabling your scene's GI.

9. Raise the Subdivs value of your Brute Force GI until any noise in the Global Illuminat ion becomes acceptably smooth and clear - this time using the GlobalIllumination render element pass to check the noise levels. Again, as you raise the Subdivs value, the red pixels in your SampleRate render element should bereceding back to the very edges of your objects and textures while most other areas gradually become more blue or green - indicating that less Image Samples (AAare being needed.

A note about Hair: If using the VRayHairMtl in your scene, the quality of your hair's reflection and refraction is in fact controlled by your scene's GlobalIllumination Subdivs value. You can verify this by noticing how hair's reflection and refraction doesn't appear at all in the Reflection or Refraction render elementsuntil GI is turned on. This is because the VRayHairMtl's reflection and refraction components are entirely dependent on GI, and this is also why the VRayHairMtlhas no separate Subdivs values for it's reflection and refraction. So now is also the time to be tuning your hair reflection and refraction quality.

Tuning the scene's Reflections and Refractions:

10. In V-Ray's Global Settings rollout - Check 'Reflection/Refraction' and 'Glossy Effects' to re-enabled them.At this point your scene should render as normal, with lighting, GI, and material reflection & refraction. [Example]But again, notice that noise (along with more red pixels in the SamplerRate render element) have been re-introduced to the render from enabling your scene'sReflections & Refractions.

11. Raise the Subdivs values in your materials' Reflections until any noise in them becomes acceptably smooth and clear. It's easiest to see the effect of raising theseSubdivs values by checking your Reflection render element pass. Again, as you raise these Subdiv values, the red pixels in your SampleRate render element shouldagain be receding to the very edges of your objects and textures while other pixels gradually become more blue or green - indicating that less Image Samples (AA)are being needed.

12. Repeat the previous step, this time with your scene materials' Refractions.

Your render should now be optimized for an ideal render time according to the level of quality (noise threshold) you have it set at!

If you desire less noise, lower the Image Sampler's 'Color Threshold' value, and raise Lights / GI / Materials Subdivs as needed.

http://www.cggallery.com/images/tutorials/vray_optimization_procedure_02.jpghttp://www.cggallery.com/images/tutorials/vray_optimization_procedure_04.jpghttp://www.cggallery.com/images/tutorials/vray_optimization_procedure_03.jpg


12/13



Figure 10

An animated GIF illustrating how allocating more samples to the DMC Sampler reduces the stress on the Image Sampler. The Image Sampler's Min & Max Subdivs staythe same, while the scene's Lights / GI / Materials Subdivs rise - resulting in less Primary Samples (AA) being needed while quality improves.

Additional Tips & Tricks

In the examples in this tutorial, I kept the Lights / GI / Materials all at the same Subdivs values for the sake of simplicity and to make the concepts easy tounderstand. But it's important to remember that a properly optimized scene will have varying Subdiv values specifically tailored to the needs of each of thesesecondary aspects of the scene.For example: A material that's only 5% reflective probably wont need too many reflection samples to prevent noise from being visible in the final image, since it'sfinal RGB value will be 95% dependent on the material's diffuse or refraction components. But if that same material was instead 95% reflective, it will need morereflection samples to prevent noise being visible in the final render, since the reflection will now be the main contributing factor of the material's final RGB valuesThe same goes for material glossiness - the more glossy a material's reflection or refraction is, the more samples it'll need to eliminate noise. The same applies for lights - the larger the light, the softer the shadows, and the more samples it'll need eliminate noise.Keep the DMC Sampler's Adaptive Amount setting below 1.0. There are many instances where setting this value at or near the maximum value of 1.0 can givereally unpredictable results. The default value of 0.85 is a good place to leave it set.Experiment with unlinking the Image Sampler's Color Threshold value from the DMC Sampler's Noise Threshold by unchecking the 'Use DMC Sampler

Threshold' checkbox under V-Ray's Image Sampler rollout. Then increase the Color Threshold value in small increments to help the Image Sampler not confusenoise caused by Lights / Shadows / GI / Materials for geometric or textural detail. Raising this value can potentially re-introduce noise in your image, so you caneither raise your secondary Subdivs values higher to compensate, or just accept the slightly noiser but faster render times. It takes a bit of experimentation to see if it's worth it for your particular scene.Experiment with disabling the Image Filter of the Image Sampler if you don't have very small repeating detail patterns in your scene. V-Ray's Image Sampler (AA) already does a good job resolving and smoothing detail - so additional filtering sometimes isn't needed.Experiment with disabling the Filter Maps checkbox in V-Ray's Global Settings rollout, or lowering the filter/blur values of individual bitmaps used in your scene's materials to values like 0.1 or 0.2. Especially consider disabling the filtering of opacity maps for materials like leaves in trees. Disabling or reducing thefilter/blur values of maps will have a definite render speed increase while making your maps appear sharper, but can also have the side effects of increased RAMusage, and possible flickering or scintillation of maps in animations.If using Light Cache for your GI's secondary bounces - enable 'Use for Glossy Rays' and 'Retrace Threshold' to help speed up the calculation of glossy materialIf using V-Ray 3.0 - try enabling the Embree raycaster via the 'Use Embree' checkbox in the V-Ray's System rollout. In many scenes the Embree raycaster canyield a great reduction in render time with no visible difference in quality.Reduce V-Ray's Bucket Size to something like 32x32 or 24x24 to avoid larger individual buckets getting stuck on a particularly difficult part of the render whileother the buckets finish rendering and leave the image - causing your CPU to only use a fraction of it's available power to finish the last bit of the render. V-Ray 3.dynamically reduces Bucket Size towards the end of a render to help avoid this for you.

http://www.cggallery.com/images/tutorials/vray_optimization_figure_10.gif


13/13


Conclusion

In closing - it's important to keep in mind that every scene is different, and therefore has different needs from V-Ray's two samplers. Settings that optimize one scene can potentially grind another scene to a halt - so please remember: Your settings and ability to optimize a render can vary greatly from one sc ene to the next. With a bit of tri& error, practice, and patience, you'll gain the experience to intuitively know what settings a scene calls for.

So hopefully that helped to clear up the often confusing topic of V-Ray Render Optimization for you! I wish you fast renders and the best of luck with your projects!

Special thanks to:

Toni Bratinevic and John O'Connell for the information they've generously shared with the community on the subject. Peter Guthrie for lending his gallery scene for usein the examples. John Rouse for proofreading and testing the procedures in this article.

Donate

Have you found this tutorial helpful?

If so, consider chipping in whatever you feel it's worth so I can dedicate more time to creating free high quality content to share with the CG community.

Thanks! I really appreciate the support!

PayPal Donation

BitCoin Donation

All images and content are copyright © Akin Bilgic

Website design and HTML5 / CSS3 coding by Akin Bilgic
http://www.joconnell.com/http://www.interstation3d.com/http://www.peterguthrie.net/http://www.johnrouse.net/

V-Ray Render Optimization

Documents

Transcript of V-Ray Render Optimization