V A L U T E K DATA SH E E T W I P E R S Valutek Pre-Wetted ... Dat… · and DI water. The...

2
Part Number: VTSNTRI Valutek Pre-Weed Spunlace Non-Woven Wiper Valutek’s pre-weed spunlace non-woven wiper is composed of a hydro entangled, nonwoven blend of 55% cellulose and 45% polyester with various saturaon levels of isopropyl alcohol and DI water. The pre-weed format enhances the wipers absorbent capacity, effecveness and reduces airbone contam- inaon from tradional solvent bole dispensers, spray and spills. All Valutek pre-weed wipers are assembled in a Class 10 cleanroom under Valutek inspecon and strict process control to ensure Valutek quality standard and product specificaons. As part of the Valutek Nanotek product family, this product is recommended for use in a clean- room Class 1-10 (ISO 3-4) crical environment. It is designed for use in wet cleaning of crical surfaces and products. Various IPA blend levels are ideal for removing different cleaning and disinfecng residues in regulated environments. Descripon: Applicaon: VTSNTRI Sizes, IPA Concentraon Percentage and Packaging | WIPERS VALUTEK DATA SHEET INNOVATIVE SOLUTIONS FOR CRITICAL ENVIRONMENTS Part Number VTSNTRI06-99 VTSNTRI10-99 VTSNTRI70-99 VTSNTRI90-99 23 cm x 23 cm 23 cm x 23 cm 75 ea/pail, 2pails/case 75 ea/pail, 2pails/case 75 ea/pail, 2pails/case Packaging 75 ea/pail, 2pails/case 23 cm x 23 cm Size 23 cm x 23 cm Features: 55% cellulose and 45% polyester blend with cold knife cut edge Contains no chemical binders Pre-wetted with consistent IPA/DI Water concentrations and saturation levels 99.99% IPA mixed with 18 megohm DI water for unmatched assayed purity Available in both resusable pail packaging and refill pack packaging The pre-wet solution increases both cleaning efficiency and cleaning protocol consistency 9” x 9” 9” x 9” 9” x 9” 9” x 9” Cold Knife Cut Edge USA-Albany.NY Valutek East Valutek West USA-Phoenix.AZ Valutek Asia Sdn. Bhd Malaysia Valutek P.R.C. China p 800.763.1250 info@valutek.com f 602.252.1972 www.valutek.com IPA / DI H 2 O (%) Total/Case VTSNTRI99-99 75 ea/pail, 2pails/case 23 cm x 23 cm 9” x 9” 6/94 10/90 70/30 90/10 99/1 150 ea/case 150 ea/case 150 ea/case 150 ea/case 150 ea/case NanoTek ISO 3-4 (Class 1 -10) Reusable Pail Package

Transcript of V A L U T E K DATA SH E E T W I P E R S Valutek Pre-Wetted ... Dat… · and DI water. The...

Page 1: V A L U T E K DATA SH E E T W I P E R S Valutek Pre-Wetted ... Dat… · and DI water. The pre-wetted format enhances the wipers absorbent capacity, effectiveness and reduces airbone

Part Number: VTSNTRI

Valutek Pre-Wetted Spunlace Non-Woven Wiper

Valutek’s pre-wetted spunlace non-woven wiper is composed of a hydro entangled, nonwoven blend of 55% cellulose and 45% polyester with various saturation levels of isopropyl alcohol and DI water. The pre-wetted format enhances the wipers absorbent capacity, effectiveness and reduces airbone contam-ination from traditional solvent bottle dispensers, spray and spills. All Valutek pre-wetted wipers are assembled in a Class 10 cleanroom under Valutek inspection and strict process control to ensure Valutek quality standard and product specifications.

As part of the Valutek Nanotek product family, this product is recommended for use in a clean-room Class 1-10 (ISO 3-4) critical environment. It is designed for use in wet cleaning of critical surfaces and products. Various IPA blend levels are ideal for removing different cleaning and disinfecting residues in regulated environments.

Description:

Application:

VTSNTRI Sizes, IPA Concentration Percentage and Packaging

| W I P E R SV A L U T E K D A T A S H E E T

USA - Phoenix Valutek Asia Sdn. BhdUSA - Albany

I N N O V A T I V E S O L U T I O N S F O R C R I T I C A L E N V I R O N M E N T S

Part Number

VTSNTRI06-99VTSNTRI10-99VTSNTRI70-99VTSNTRI90-99

23 cm x 23 cm23 cm x 23 cm

75 ea/pail, 2pails/case75 ea/pail, 2pails/case

75 ea/pail, 2pails/case

Packaging

75 ea/pail, 2pails/case23 cm x 23 cm

Size

23 cm x 23 cm

Features: 55% cellulose and 45% polyester blend with cold knife cut edge Contains no chemical bindersPre-wetted with consistent IPA/DI Water concentrations and saturation levels99.99% IPA mixed with 18 megohm DI water for unmatched assayed purityAvailable in both resusable pail packaging and refill pack packaging The pre-wet solution increases both cleaning efficiency and cleaning protocol consistency

9” x 9”9” x 9”9” x 9”9” x 9”

Cold Knife Cut Edge

USA-Albany.NYValutek EastValutek West

USA-Phoenix.AZValutek Asia Sdn. BhdMalaysia

Valutek P.R.C. China

p 800.763.1250 [email protected] 602.252.1972

www.valutek.com

IPA / DI H2O(%) Total/Case

VTSNTRI99-99 75 ea/pail, 2pails/case23 cm x 23 cm9” x 9”

6/9410/9070/3090/1099/1

150 ea/case150 ea/case150 ea/case150 ea/case150 ea/case

NanoTekISO 3-4 (Class 1 -10)

Reusable Pail Package

Page 2: V A L U T E K DATA SH E E T W I P E R S Valutek Pre-Wetted ... Dat… · and DI water. The pre-wetted format enhances the wipers absorbent capacity, effectiveness and reduces airbone

Part Number: VTSNTRI

Valutek Pre-Wetted Spunlace Non-Woven Wiper

VTSNTRI Technical Performance (In Dry State)

| W I P E R SV A L U T E K D A T A S H E E T

*Note: Technical data represented in this table are typical values at the time of publication. Third partyindependent lab test results available upon request.

Version 2.1. / 4.2.2018 I N N O V A T I V E S O L U T I O N S F O R C R I T I C A L E N V I R O N M E N T S www.valutek.com

VTSNTRI06R-99VTSNTRI10R-99VTSNTRI70R-99VTSNTRI90R-99

23 cm x 23 cm23 cm x 23 cm

75 ea/bag, 18 bags/case75 ea/bag, 18 bags/case

75 ea/bag, 18 bags/case75 ea/bag, 18 bags/case23 cm x 23 cm

23 cm x 23 cm

9” x 9”9” x 9”9” x 9”9” x 9”

VTSNTRI99R-99 75 ea/bag, 18 bags/case23 cm x 23 cm9” x 9”

6/9410/9070/3090/1099/1

1350 ea/case1350 ea/case1350 ea/case1350 ea/case1350 ea/case

Part Number PackagingSizeIPA / DI H2O

(%) Total/Case

NanoTekISO 3-4 (Class 1 -10)

Refill Pack Package

Basis WeightAttribute Value Units Test Method

Absorbency

Particle Counts

Sorptive Efficiency

Sorptive CapacitySorptive Rate

4.2

420

1

mL/g

mL/m2

second

IEST-RP.CC004.3, Sec 8.1/Sec 8.2

<1200 Counts/ft3

68 ± 3 g/m2 TAPPI T-410

IEST-RP.CC004.3, Sec 6.1.3/Sec 6.2.1APC: ≥0.5 µm

Wipers ApparelGloves Glove LinersAdhesive Mats Maintenance ESDCleaning &