V. 11/21 ISOLATED PRODUCTS CROSS-REFERENCE GUIDE
5
ISOLATED PRODUCTS CROSS-REFERENCE GUIDE Designed for Applications in: SOLAR OPTIMIZATION AC/DC CONVERSION ENERGY STORAGE CHARGING STATIONS V. 11/21 Singel 3 | B-2550 Kontich | Belgium | Tel. +32 (0)3 458 30 33 | [email protected] | www.alcom.be Rivium 1e straat 52 | 2909 LE Capelle aan den Ijssel | The Netherlands | Tel. +31 (0)10 288 25 00 | [email protected] | www.alcom.nl
Transcript of V. 11/21 ISOLATED PRODUCTS CROSS-REFERENCE GUIDE
ISOlATED PRODUCTS CROSS-REFERENCE GUIDE
© 2021 Monolithic Power Systems, Inc. Patents Protected. All Rights Reserved.
ISOLATED PRODUCTSCROSS-REFERENCE GUIDEDesigned for Applications in:
SOLAR OPTIMIZATION
AC/DCCONVERSION
ENERGY STORAGE
CHARGING STATIONS
V. 11/21
Singel 3 | B-2550 Kontich | Belgium | Tel. +32 (0)3 458 30 33 | [email protected] | www.alcom.be
Rivium 1e straat 52 | 2909 LE Capelle aan den Ijssel | The Netherlands | Tel. +31 (0)10 288 25 00 | [email protected] | www.alcom.nl
Isolated Products Cross-Reference GuideQ4 2021
IntroductionMPS has a whole family of isolated solutions that are pin-to-pin compatible with existing solutions on the market. These products are designed to be compliant to both UL1577 and VDE-0884 standards.
Visit monolithicpower.com/isolation for more information.
2
Why Do We Need Isolation?NOISE IMMUNITY
Isolate analog and power GND
• Avoid cross-conduction from the MOSFET
Improve communication quality
SAFETY
Protect the human body and low-voltage devices
LEVEL SHIFT
Shifting from 3.3V up to 5V
Product Offerings
Advantages
» Isolated Gate Drivers» Digital Isolators» Digital Isolators with Power» Isolated Power Modules
» Pin-to-pin compatible with existing solutions to alleviate supply shortage» Wide driver bias range enables more flexibility with FET selection
(SiC, GaN, IGBT)» Higher source and sink peak currents enable higher efficiency
ISOL
ATED
PRO
DUCT
S CR
OSS-
REFE
REN
CE G
UIDE
Simple, Easy SolutionsTM
MonolithicPower.com
ISOLATED PRODUCTS CROSS-REFERENCE GUIDE
Applications
3
» Supports various isolation requirements to maximize system safety level» Industry-leading performance» Supports UL1577 certification
Charging Stations
AC/DC ConversionOffline/Online UPSServer Power
Battery-to-GridSolar InvertersSolar Optimizers
Energy Storage
Isolated Products Cross-Reference GuideQ4 2021
4
MP18831/51/71
MP18831-4CGYMP18851-A4CGY
MP18851-A4CGSEMP18831-A4BGLUMP18851-A4BGLUMP18871-A4BGLU
Si823xUCC20520UCC21520UCC21521
Server PSUs Telecom PSUsSolar InvertersEnergy Storage
DCFC Charging StationsAC/DC Conversion
Motor Drives
MP276xxMP27622GY-Z (2 in/2 out)MP27631GY-Z (3 in/1 out)MP27633GY-Z (3 in/3 out)
ISO7741/ISO7641Si8641
MAX14931
Industrial Automation/PLCRS-485/422/CAN Interfaces
Power MetersEV/BMS
DUAL-CHANNEL ISOLATED GATE DRIVERS
ISOL
ATED
PRO
DUCT
S CR
OSS-
REFE
REN
CE G
UIDE
ISOLATED POWER MODULES
IN: 4.5-5.5V
INB
VDD1
INA
INC
OUTD
GND1
VDD2
OUTC
OUTB
OUTA
GND2
IND
EN1 EN2High/Low High/Low
C10.1• •F
C20.1• •F
MA
STER
SLA
VE
MP(Q)276xx
MIDxxW0505A10• •F 10• •F
VIN
GND1
VOUT
GND2
5V OUT
Dual-Channel Isolated Gate Driver Digital Isolator + Isolated Power Module
INA
INB
VDDI VDDA
GNDI
EN/DISABLE
VDDIOUTA
VSSA
VDDB
OUTB
VSSB
VDDI
VDDO
VDDO
C2
C3
R1
R2
C1
MP18851
MID1W0505A MID1W0505AGY-3S 5V to 5V isolated module,0.6W/1W options available
Isolated Digital Isolator BiasRS-485/422/CAN Interfaces
Isolated Sensor Power SuppliesTelecom/Networking
MID06W0505A MID06W0505AGY-3R 5V to 5V isolated module,0.6W/1W options available
Isolated Digital Isolator BiasRS-485/422/CAN Interfaces
Isolated Sensor Power SuppliesTelecom/Networking
4
Family Part Number P2P Replacement Applications
Family Part Number P2P Replacement Applications
Family Part Number P2P Replacement Applications
Family Part Number Description Applications
DIGITAL ISOLATORS WITH INTEGRATED POWER
DIGITAL ISOLATORS - NO INTEGRATED POWER
MPQ278xxMPQ27831-HP-MGY-3MPQ27821-LP-MGY-3MPQ27811-HP-MGY-3
ISOW784xISOW7821
Industrial Automation5G RRU, Industrial CPE
RS-485/422/CAN InterfacesPower Meters
55
ISOLATED PRODUCTS CROSS-REFERENCE GUIDE
Why Is CMTI Important?
CMTI for Isolated Products
MP18831/51/71
MPQ27811/21/31
MP27622/31/33
MID1W0505A/MID06W0505A
» Common-mode transient immunity (CMTI)» High slew rate transients can
corrupt data transmission across the iso-lation barrier
» CMTI measures in kV/µs or V/ns» Especially important in:
- High-voltage applications - Fast transient devices (SiC, GaN)
Coupling Path
Coupled Noise
• Up to 5kVRMS Isolation • CMTI > 100V/ns• 4A Source/4A Sink Peak
Current• SOIC-16NB/WB and
LGA-13 Package• P2P with the SI823x,
UCC2x520 Families
• Last 2 Digits Denote Number of I/O Channels
• Input Range: 2.5V to 5.5V• Up to 150Mbps Data Rate• CMTI > 100V/ns• 13ns Propagation Delay• Available in an SOICW-16
Package• P2P with the ISO7741,
Si8641, and MAX14931
• Input Range: 4.5V to 5.5V• Integrated 1W Isolated
Power• Up to 50Mbps Data Rate• 3kVRMS Isolation,
CMTI > 100V/ns• Available in an SOICW-16
Package• P2P with the ISOW784x,
ISOW7821, and MAX14931
• Input Range: 4.5V to 5.5V• 5V Output Voltage• 0.6W/1W Output Options• 0.4% Load/1.5% Line
Regulation• 3kVRMS Isolation• Available in an SOICW-16
Package
Isolated Dual-Channel Gate Driver
2-Channel to 4-Channel Digital Isolator with Power
4-Channel to 6-Channel Digital Isolator
Isolated Power Module
Singel 3 | B-2550 Kontich | Belgium | Tel. +32 (0)3 458 30 33 | [email protected] | www.alcom.be
Rivium 1e straat 52 | 2909 LE Capelle aan den Ijssel | The Netherlands | Tel. +31 (0)10 288 25 00 | [email protected] | www.alcom.nl
