VILTA

Us

er M

an

ua

l

V 1.2

welcome

1. VILTA contains two modes: Denoising and Performance

Denoising is default mode, suitable for all scenarios.

Be sure to select Denoising mode when you have high

requirement on audio quality.

The Performance is strengthen mode, which will greatly

improve the stability of gimbal. The motor response is radical

that will be accompanied with some noise.

The Performance Mode only applies to scenes that require

extreme high stability accuracy but not demand high on camera

recording quality. (Switch Denosing and Performance in App)

2. The GoPro5 AGC(Automatic Gain Control) function will greatly

amplify the background sound. Please select Wind Only mode

on GoPro 5 to minimize the noise to the lowest. GoPro3 and

GoPro4 do not have this problem.

Important Statement

Please visit official website to download the latest User Manual

01

1

23

45

6

78

9

10

11

11

12

1314

15

16

Product Overview

02

01. Tilt Axis

02. Roll Axis

03. Pan Axis

04. Power Switch

05. Shutter Button

06. Status Indicator

07. Joystick

08. Micro-USB Charging Port

09. Dismantle Button

10. Lanyard Hole

11. Camera Fixed Knob

12. Camera Frame

13. Pan Axis Lock

14.1/4 Screw Port

15. Function Button

16. HERO3/3+/4 Frame

17. Golden Finger Connector

18. 1/4 Screw Port

19. Accessory Mounting Port

20. Handle Battery Indicator

21. Micro-USB Charging Port

22. Handle Battery

23. Camera Charging Module(Optional)

17

21

17

18

22

19

23

20

03

Installation1

Unlock Gimbal1

Install Camera2

User Manual

1) Slide the Pan Axis Lock down2) Twist the Tilt Aixs and Roll Axis to unlock

The Status Indicator will flash red if any axis is locked

1) Insert GoPro in the Camera Frame2) Fasten the knob as indicated

1. Put Hero 3/3+/4 into frame before installing to the Camera Frame2. To avoid the camera falling, please ensure the knob is fixed before power on

04

Handle Dismantle and Mantle3

Install Accessory4

Accessory Mounting Port

1/4 Screw Port

Dismantle: Press handle Dismantle Button and push as stated to demount the handle

Mantle: Release Dismantle Button and align the mount, slightly pushing forward the gimbal

2. Ensure you hear a click while mounting the grip

Fit for GoPro official accessories

Fit for 1/4 screw camera kitaccessories

1. After dismantling handle, double tap on Power Button of gimbal to switch Follow Mode

05

Control2

Joystick1

Joystick Virtual JoystickY:61 P:45 100%

SettingQuick SettingsOperation StatusJoystick

Tilt

Pan

Manual 2

Manual Mode can be turned on/ off in App

1）Long press the Power Switch and control VILTA through joystick2）Connect VILTA with APP and control through vitual joystick

Directly adjust the shooting direction by hand

06

Connect and Shoot3

VILTA as Remote Control1

GoPro5

GoPro 4

Power on the gimbal and camera, and operate camerawith the following steps

1) Long press the Shutter Button for 2 seconds to shoot/stop shooting2) Short press to take a picture

CONNECTIVITY Connect New Smart Remote

SETTING WI-FI RCPAIRON

When the Shutter Button lights off, connection is successful

Shutter Button

For more detailed function: check【Advanced】—【Shutter Button】

NEWWI-FI RC

GoPro 3/3+

07

Connect APP 2

1）Via App，you can control the gimbal and camera2）You can select the shooting mode in the Shooting Function Menu in the APP

VIDEO

PHOTO

TIME LAPSE

Video Video+Photo Looping

Photo Night Burst

Time lapse photo Night lapse photo Time lapse video

Download and install APP

For iphone

For AndriodScan the QR code below to download and install

Please search FreeVision in APP Store to download and install

The Shooting Function Menu in the APP

08

Charging4

VILTA Charging1

Battery Indicator2

GoPro Charging3

Micro-USB Charging Port

Charge gimbal and handle seperately through micro-USB charging port

1) Take off the GoPro USB side door cover (Caution: it may affect the water-proof function of GoPro)2) Insert charging module into GoPro, the camera will be charged by VILTA. Set GoPro charging mode in APP

GoPro charging module is an optional accessory

2) Short press on Function Button to check handle battery level via Handle Battery Indicator.

1) Charge gimbal when the Power Switch glints.The Status Indicator alternately glints in red,yellow and green lights when charging. The Status Indicator turns green when fully charged.

09

5

1

Red glint

Green glint

Warning

Busy/Auto Calibration

Status Indicator

Yellow

Red

Green

Semi-follow Mode

Follow Mode

Lock Mode

Single tap

Press when recording Tag

Recording On/Off

Button Function

Connected (Light off)

Picture

Double tap

Long press for 2sShutterButton

Pairing ( Light on)Long press for 6s

Selfie

Single tap

Long press for 2s

Double tap

On / Off

Sleep/AwakePowerSwitch

Button Function

（wearable gimbal only）

Long press for 7.5s Forced Shutdown

Mode Switch

Shutter ButtonPower Switch

Status Indicator

Advanced Button Function & Status Indicator Specification

10

Mode2

Function Button

Function Button Control

Power Switch Control

Power Switch

When the handle is released, double tap Power Switchto shift mode

SingleTap

Double Tap

QuadrupleTap

LongHold Lock Mode

Tilt and Roll Axes are locked.Pan Axis smoothly moves with handle

Follow Mode

Lock Mode

Semi-Follow mode(Default)

Roll Axis is locked. Pan and Tilt Axes smoothly move with handle

Tilt, Roll, and Pan Axes are locked. Camera always keeps the current shooting direction

The camera returns to the front TripleTap

Center the camera

(Return to the previous mode when Function Button released)

The Switching Sequence：

Semi-Follow (Default) Follow Lock

11

Parameter6

Specification Parameter:1

Technical Parameter:2

Dimensions 94*41*258 mm(Folded)Weight 430g(15.16 oz)Supported Camera GoPro Hero3/3+/4/5

Pan Axis: 360° (Infinite Rotation)Tilt Axis: -45°～100°Roll Axis: ±40°

Static Accuracy Dynamic AccuracyTilt: 0.001° Tilt: 0.01°Pan: 0.002° Pan: 0.02°Roll: 0.001° Roll: 0.01°

·Controllable Rotation Range

·Accuracy

Pan Axis: 360° (Infinite Rotation)Tilt Axis: -90°to 135°Roll Axis: -44°to 90°

·Mechanical Rotation Range

Voltage 7.6 V Battery Type Intelligent Lithium Battery Battery Capacity 350 mAh Energy 2.66 Wh

·Gimbal Battery

·Gimbal Voltage 7.6VWorking Current Static 300mA , Dynamic 2.5A Consumption 2.5W

·Handle Battery Voltage 7.4 V Battery Type Intelligent Lithium Battery Handle Battery Capacity 2000mAh Energy 14.8Wh

·Maximum Control Speed: Adaptive Rotation Speed（±500 °/s)

12

Other Specification3

WARNING

1. Do not expose to fire or high heat.2. Drop and collision will break VILTA. Please caution.3. Not water-proof. No water or liquid cleaning agent.4. Do not disassemble, repair or modify VILTA. 5. Gimbal and handle need to be respectively charged. Please use charger complying with public safety regulation.6. Do not interfere VILTA operation when working.7. Not suitable for children.8. Not include GoPro.

Web: www.freevisiontech.comUS Customer Support：888-898-6853

· Operating Temperature: -10℃ - 50℃(14 -122 F)· Wearable Gimbal Working Time: 1.2h· Handheld Gimbal Working Time: 7h· Handle Charging Time: 2.5 h (5V,2A)· Gimbal Charging Time: 1.5 h (5V, 1A)· WIFI Working Frequency 2.412-2.462 GHz

1. VILTA handheld gimbal2. Charging cable3. Portable bag4. Lanyard5. User manual6. Hero 3/3+/4 frame

Packing list

° °

www.freevisiontech.com