UVT Air Steam...galvanised steel sheet or Aluminium options. Weight Project dependent Rating IP 20...

1
Product number UVT AirStream UV-C source Project dependent Emitter life span 9,000 hours Wavelength 254 nm Power Project dependent Power requirements 230 V (50 Hz) Construction material Stainless steel, galvanised steel sheet or Aluminium options. Weight Project dependent Rating IP 20 Height 300 - 2,500 mm Width 300 - 2,500 mm Depth 700 mm UV Technology Limited P.O. Box 257 Liverpool L23 8WR t: +44 (0)161 408 0060 e: [email protected] w: www.uvtglobal.com E&OE 2020 UVT Air Steam Food production facilities, commercial buildings, retail outlets etc. have different dimensions and the ventilation systems also differ in terms of design and technology. The specifications of the AirStream air disinfection module can be customised to a variety of different installation environments. The modules are made of either galvanised sheet metal, stainless steel or aluminium, and can be easily integrated into air conditioning systems or other ventilation systems, either as retrofit solutions or in new projects. The UV-C emitters can also be directly integrated into existing ventilation systems. The stand-alone AirStream C air conditioning module also enables the air in larger rooms without a ventilation system to be effectively disinfected. ● Effective disinfection of supply air ● Inactivation of viruses ● Kills bacteria and moulds ● Compliance with VDI 6022 guidelines ● Lamp wattage matched to the required volume flow ● Installation on the inside walls of the duct does not cause additional pressure loss ● Easy to install ● Optional flow monitoring ● Can be equipped to comply with HACCP procedures ● certification Technical Information

Transcript of UVT Air Steam...galvanised steel sheet or Aluminium options. Weight Project dependent Rating IP 20...

  • Product number UVT AirStream

    UV-C source Project dependent

    Emitter life span 9,000 hours

    Wavelength 254 nm

    Power Project dependent

    Power requirements 230 V (50 Hz)

    Construction material Stainless steel, galvanised steel sheet or Aluminium options.

    Weight Project dependent

    Rating IP 20

    Height 300 - 2,500 mm

    Width 300 - 2,500 mm

    Depth 700 mm

    UV Technology LimitedP.O. Box 257

    LiverpoolL23 8WR

    t: +44 (0)161 408 0060e: [email protected]: www.uvtglobal.com

    E&OE 2020

    UVT Air Steam

    Food production facilities, commercial buildings, retail outlets etc. have different dimensions and the ventilation systems also differ in terms of design and technology. The specifications of the AirStream air disinfection module can be customised to a variety of different installation environments.

    The modules are made of either galvanised sheet metal, stainless

    steel or aluminium, and can be easily integrated into air conditioning systems or other ventilation systems, either as retrofit solutions or in new projects.

    The UV-C emitters can also be directly integrated into existing

    ventilation systems. The stand-alone AirStream C air conditioning module also enables the air in larger rooms without a ventilation system to be effectively disinfected.

    ● Effective disinfection of supply air

    ● Inactivation of viruses

    ● Kills bacteria and moulds

    ● Compliance with VDI 6022 guidelines

    ● Lamp wattage matched to the required volume flow

    ● Installation on the inside walls of the duct does not cause

    additional pressure loss

    ● Easy to install

    ● Optional flow monitoring

    ● Can be equipped to comply with HACCP procedures

    ● certification

    Technical Information


RENT ROULETTE · 2017. 7. 13. · Ballroom (Auditorium) Ballroom (Banquet) Mezzanine (Fixed) Lobby SQ. FT. 2,500 2,500 2,500 2,500 2,000 600 STANDING 400 300---100 SITTING 230-230

RENT ROULETTE · 2017. 7. 13. · Ballroom (Auditorium) Ballroom (Banquet) Mezzanine (Fixed) Lobby SQ. FT. 2,500 2,500 2,500 2,500 2,000 600 STANDING 400 300---100 SITTING 230-230

Standard Performance Digital Signage - SM5KD SeriesVESATM Standard Mount Interface 300 mm x 300 mm 200 mm x 200 mm SPECIAL FEATURES Temperature Sensor, Auto Brigtness Sensor, Tile

Standard Performance Digital Signage - SM5KD SeriesVESATM Standard Mount Interface 300 mm x 300 mm 200 mm x 200 mm SPECIAL FEATURES Temperature Sensor, Auto Brigtness Sensor, Tile

MM 300 Plus (**) 7 229

MM 300 Plus (**) 7 229

VESA Expansion Kit...888-97-292-W-00 rev. D • 08/19 1 of 9 200 mm 100 mm 3 200 mm 300 mm 5 400 mm 200 mm 6 200 mm 200 mm 200 mm 300 mm 300 mm 400 mm 300 mm 400 mm 100 mm 100 mm 6

VESA Expansion Kit...888-97-292-W-00 rev. D • 08/19 1 of 9 200 mm 100 mm 3 200 mm 300 mm 5 400 mm 200 mm 6 200 mm 200 mm 200 mm 300 mm 300 mm 400 mm 300 mm 400 mm 100 mm 100 mm 6

CSCE · Web viewThe truss consists of 300 mm × 300 mm rectangular tube sections for the lower chords and 300 mm × 200 mm for the diagonals. The upper chord consists of three PBL

CSCE · Web viewThe truss consists of 300 mm × 300 mm rectangular tube sections for the lower chords and 300 mm × 200 mm for the diagonals. The upper chord consists of three PBL

5. Digital Floor Tiles (300 x 300 mm)

5. Digital Floor Tiles (300 x 300 mm)

PALLADIO · Cod. 520569 495 x 300 x 515 mm Cod. 520589 590 x 330 x 550 mm Cod. 52057811 490 x 300 x 640 mm Cod. 52059817 590 x 330 x 690 mm Cod. 52057869 490 x 300 x 640 mm

PALLADIO · Cod. 520569 495 x 300 x 515 mm Cod. 520589 590 x 330 x 550 mm Cod. 52057811 490 x 300 x 640 mm Cod. 52059817 590 x 330 x 690 mm Cod. 52057869 490 x 300 x 640 mm

DAMPA MARINE CEILING SYSTEMS DAMPA DCC 200/300...1200 mm 1200 mm 1200 mm 1200 mm 1200 mm 300 mm 600 mm 600 mm 4 DAMPA® DCC 200/300 Installation principles The Basic Principle Edge

DAMPA MARINE CEILING SYSTEMS DAMPA DCC 200/300...1200 mm 1200 mm 1200 mm 1200 mm 1200 mm 300 mm 600 mm 600 mm 4 DAMPA® DCC 200/300 Installation principles The Basic Principle Edge

Uday Industries9.0 mm 9.0 mm Size 300 x 300 mm Normal 300 x 300 mm Digital Elevation 300 x 300 mm Nominal Thickness 9.5 mm (Approx) 9.5 mm (Approx) 12.00 mm (Approx) Number Of Tiles

Uday Industries9.0 mm 9.0 mm Size 300 x 300 mm Normal 300 x 300 mm Digital Elevation 300 x 300 mm Nominal Thickness 9.5 mm (Approx) 9.5 mm (Approx) 12.00 mm (Approx) Number Of Tiles

300 mm Integrated Vision for Semiconductor · PDF file2.0 300 MM SEMICONDUCTOR OVERVIEW ... Figure P2 New Trends in Standardization Processes ... 300 mm Integrated Vision for Semiconductor

300 mm Integrated Vision for Semiconductor · PDF file2.0 300 MM SEMICONDUCTOR OVERVIEW ... Figure P2 New Trends in Standardization Processes ... 300 mm Integrated Vision for Semiconductor

TATRA TAkes you fARTheR TATRA PHOENIX · Steel, 300 l + 45 liters AD Blue dIMeNsIoNs Wheelbase 2,150 + 2,560 + 1,450 mm Width 2,500 mm Track - front 1,942 mm - rear 1,774 mm Length

TATRA TAkes you fARTheR TATRA PHOENIX · Steel, 300 l + 45 liters AD Blue dIMeNsIoNs Wheelbase 2,150 + 2,560 + 1,450 mm Width 2,500 mm Track - front 1,942 mm - rear 1,774 mm Length

INR PRICE LIST - cparekhunbrako.comLength Inch* 6 to 410 mm 60 to 500 mm 40 to 300 mm--10 to 300 mm--3 to 85 mm 6 to 50 mm 6 to 60 mm 6 to 300 mm Metric EQUIVALENT STANDARDS IS ISO

INR PRICE LIST - cparekhunbrako.comLength Inch* 6 to 410 mm 60 to 500 mm 40 to 300 mm--10 to 300 mm--3 to 85 mm 6 to 50 mm 6 to 60 mm 6 to 300 mm Metric EQUIVALENT STANDARDS IS ISO

PART · (300 mm) (238 mm) (314 mm) 18 in 9.4 in 12.5 in (300 mm) (238 mm) (318 mm) drawing #: 1105 drawn by: jcb 04.06.06 approved by: jcb 06.25.07 note: all fittings dimensions are

PART · (300 mm) (238 mm) (314 mm) 18 in 9.4 in 12.5 in (300 mm) (238 mm) (318 mm) drawing #: 1105 drawn by: jcb 04.06.06 approved by: jcb 06.25.07 note: all fittings dimensions are

AMS-224E INSTRUCTION MANUAL (ENGLISH)AMS-224E-6030 : 600 mm × 300 mm 2 Max. sew ng speed 2,500 rpm (When sew ng p tch s 3 mm or less) 3 Settable st tch length 0.1 to 12.7 mm (M n.

AMS-224E INSTRUCTION MANUAL (ENGLISH)AMS-224E-6030 : 600 mm × 300 mm 2 Max. sew ng speed 2,500 rpm (When sew ng p tch s 3 mm or less) 3 Settable st tch length 0.1 to 12.7 mm (M n.

X W s vhk ly zw j pm { u Spécifications · 2019. 12. 18. · A Hauteur de levage maximale 2,500 mm (98,4 po) 2,500 mm (98,4 po) B Dégagement avec godet au niveau 2,234 mm (88 po)

X W s vhk ly zw j pm { u Spécifications · 2019. 12. 18. · A Hauteur de levage maximale 2,500 mm (98,4 po) 2,500 mm (98,4 po) B Dégagement avec godet au niveau 2,234 mm (88 po)

Temida · temida hg [mm] h [mm] w [mm] d [mm] [w] indeks e 1dr 420 540 500 80 300 10111820100101 e 2dr 620 740 500 80 300 10111820200101 e 3dr 940 1060 500 80 300 10111820300101 e

Temida · temida hg [mm] h [mm] w [mm] d [mm] [w] indeks e 1dr 420 540 500 80 300 10111820100101 e 2dr 620 740 500 80 300 10111820200101 e 3dr 940 1060 500 80 300 10111820300101 e

B AOM O WHRB - Kitchens and Bathrooms · Length mm 400 500 600 800 Height mm 300 300 300 300 Code 343 353 363 383 Over Extractor Filler Kits Length mm 600 1000 Height mm …

B AOM O WHRB - Kitchens and Bathrooms · Length mm 400 500 600 800 Height mm 300 300 300 300 Code 343 353 363 383 Over Extractor Filler Kits Length mm 600 1000 Height mm …

kontrolotomasyon.files.wordpress.com · 162 mm. 10 300 mm. 140 mm. 120. 5.000e-001

kontrolotomasyon.files.wordpress.com · 162 mm. 10 300 mm. 140 mm. 120. 5.000e-001

B2 = 300 mm B2 H2 = 694 mm A2 B1 H2 H1 A1 · B1 A2 H2 A2 =2632 mm B2 B2 = 300 mm H2 = 694 mm A1 =2636mm B1 = 600 mm H1 = 840 mm VARIANTA 2. Assembly instructions. Assembly instructions.

B2 = 300 mm B2 H2 = 694 mm A2 B1 H2 H1 A1 · B1 A2 H2 A2 =2632 mm B2 B2 = 300 mm H2 = 694 mm A1 =2636mm B1 = 600 mm H1 = 840 mm VARIANTA 2. Assembly instructions. Assembly instructions.

Measuring range - TGS · Measuring range: diameter max 600 mm (radius 300 mm); height max 600 mm; diameter max 600 mm (radius 300 mm); height max 800 mm. Machine structure in stainless

Measuring range - TGS · Measuring range: diameter max 600 mm (radius 300 mm); height max 600 mm; diameter max 600 mm (radius 300 mm); height max 800 mm. Machine structure in stainless