UV200 UV Cure Conveyor

2
UV200 UV Curing Conveyor The UV200 Curing Conveyor utilises high energy Fusion Microwave Lamp technology coupled with a dedicated SMEMA conveyor design with variable lamp height adjustment to provide a sophisticated, reliable integrated system for inline UV cure processing. The use of UV (ultraviolet) cure materials like UV conformal coatings in electronics manufacturing mean that productivity in your conformal coating process can be massively increased due to increased process speeds and reduced cure footprint.

description

The UV200 is a new dedicated inline UV cure conveyor designed for curing UV cure materials like conformal coatings in electronics manufacture.

Transcript of UV200 UV Cure Conveyor

Page 1: UV200 UV Cure Conveyor

UV200 UV Curing Conveyor

The UV200 Curing Conveyor utilises high energy Fusion Microwave Lamp technology coupled with a dedicated SMEMA conveyor design with variable lamp height adjustment to provide a sophisticated, reliable integrated system for inline UV cure processing.

The use of UV (ultraviolet) cure materials like UV conformal coatings in electronics manufacturing mean that productivity in your conformal coating process can be massively increased due to increased process speeds and reduced cure footprint.

Page 2: UV200 UV Cure Conveyor

SCH Technologies offer:-

Global Subcontract Coating Services

Global supply of Conformal Coating

Application Equipment

Conformal Coatings

Conformal Coating Training courses

Conformal Coating Consultation &

troubleshooting

PLEASE CHECK OUR WEBSITE FOR DETAILS

SCH reserves the right to make design changes to products to improve their function. These changes may occur between publishing.

Standard Features

The UV200 UV cure conveyor system includes as standard the following features

Drive Section

Single drive chain conveyor with extended pin edge for SMEMA control of the PCBs

Pallet home & clear sensors (Direct detection type) to ensure smooth flow of PCBs inline

Variable speed throughput conveyor to optimise cure time under lamps

Manual conveyor width adjustment mechanism for varied PCB and pallet widths

SMEMA interface with upstream / downstream machines.

Passage left to right travel UV Lamp Lift Platform

Lamp height adjustment via hand clamp device to provide optimal focal point curing of the coating

Lift mechanism – aluminium profile with slide mechanism

Lift height adjustment: ± 120mm

Standard Lamp Configuration: 2 x Fusion UV Systems top side only

Lamp Configuration capacity: 3 x Fusion UV Systems top and bottom side to give 500mm cure width top and bottom

PCB Details

Max PCB size - 500 mm (L) x 500 mm (W)

Max height ±120mm Feed & Exits Access

Access opening at feed and exit are manually adjustable to suit product to minimize extraction requirements

External & internal paneling

Powder coated Steel covers (including hinged lids & doors)

Interlock switched on all hinged panels Ventilation

Front Light-tight Louvre with mesh back panel Specification

Overall Footprint - 1200 mm x 800 mm

Conveyor length of : 1200 mm

Ride height 950 +/- 25 mm